Used Fold Forming for sale (9,630)

Condition: new, Year of construction: 2025, Vertical packaging machine for forming and sealing pillow bags and gusseted stand-up pouches (gusset tool needed) OR for pyramid shaped bags (special sealing unit is than mounted just for it). The packaging machine is equipped with: touch screen operating interface; plc; eye mark sensor for seal/cutting position; pneumatic sealing unit for end sealing; servo motor for film pulling; ribbon printer for batch number, date, BBD. - Specifications VFFS machine: max. speed of the machine in neutral: 50 cycles/min; bag sizes: L(40-400)xW(90-300)mm, (double film pulling possible for longer bags); suitable film width: 200-620mm; product contact parts from: AISI 304 (optional for surcharge AISI 316); power supply: 220V, 50/60Hz; power consumption: 3.5kW; air pressure: 0.4-0.8MPa; compressed air consumption: 0.8m³/min; dimensions (LxWxH): 1900*1400*1920mm; weight: 540kg. Bjdpfx Afjv Nnc Hjljlr Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: good (used), Make: Ursviken Type: VPF 1000/800-5,0 Control: Siemens Simatic panel Year: 1970 Hydraulic press for fabrication off large componts like dish heads tanks boiler shipyard and steelconstruction Renewed in 2015 with Siemens SIMATIC panel and E-Cabinet Rittal Build in height 2950 mm Maximum die height 1500 mm Movable Table & Piston in X-Ways Large package Die tooling radius 10/20/30/50/60/80/100 Pressing force 210 kg/cm2 Maximum stroke 800 mm Machine 2350 mm placed in ground Specifications Metric US Standard Capacity Kg Bljdpfx Afjkvmi Selsr 1000 Ton Distance between column 5010 mm Table Length 3000 mm Table Width 2000 mm Table Height 550 mm Ram stroke 1450 mm Approche speed 50 mm/min. Working speed 5 mm/min. Return speed 50 mm/min. Dimensions (Estimate) Length 0 mm Width 0 mm Height 0 mm Weight 0 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: new, functionality: fully functional, Year of construction: 2022, operating hours: 1 h, The machine is capable of producing pipe clamps. It has never been used for mass production, only a few test productions were made on it. Selling due to a failed project. The offer includes the press machine with 6 tools and the associated nut welding machine. The sizes of the tools: • 40-44 • 48-54 Blsdexuhd Dspfx Aflor • 55-59 • 60-66 • 68-73 • 75-80

Condition: excellent (used), - Dimensions: 1100x900x1330 mm - Serial No.: 9624893 - Year: 2006 - Plate: 400x600 - Control panel with keypad - Brand: BRAVO - Model: QUIKLY Bljdpfx Aswxym Ieflor - Voltage: 220 V - Weight: 240 kg - Power: 1.5 kW

Condition: used, Single-column hydraulic press HYDRAP type HPSK 25 No. 6312 Year of construction 1989 Pressure force 25 ton. Ram stroke 500 mm throat depth 300 mm Bsdpfxehrakvj Aflelr Installation height 700 mm Table surface 1000 x 500 mm Table bore Ø 210 mm Plunger surface 400 x 360 mm Clamping pin bore Ø 40 mm Table height above floor 855 mm Feed speed in rapid traverse 280 mm/sec. Pressing speed 3.5 mm/sec. to 25 mm/sec. Return speed 280 mm/sec. Hydraulic tank capacity 240 liters Drive power 7.5 kW Mains connection 400 Volt, 50 Hz. - Operation and programming via SIEMENS S5 with OP1 control system - Measuring system for stroke adjustment - Pressing speed infinitely variable via potentiometer - Pressure setting infinitely adjustable manually via pressure regulator - Short stroke device - Mechanical tool clamping on ram with T-slots and clamping pin hole - Switch cabinet with electrical control on the machine - Two-hand operation and electrical connection for foot control - Control provided for electrical mold monitoring - Hydraulic diagram and electrical diagram available Space requirement L x W x H 1800 x 1200 x 2930 mm Weight approx. 4 tons good condition

Condition: excellent (used), Year of construction: 1980, functionality: fully functional, equipped with: 1 Right hand feeding system 1 Eccentricpress 250 kN 4 Standard slide unit 1 Narrow slide unit working range: Blsdpfx Afer Axlvoljr wire diameter range: up to 6,0 mm stripmetal width: up to 80 mm feeding length: up to 520 mm output: 10 - 250/min

Year of construction: 2025, condition: new, Vertical packaging machinee for quad sealeded bags and with a rectangular base. The packaging machine is equipped with: touch screen operating interface; plc; eye mark sensor for seal/cutting position; pneumatic sealing unit for end sealing; servo motor for film pulling; ribbon printer for batch number, date, BBD. - Specifications VFFS machine: max. speed of the machine in neutral: 45 cycles/min; bag sizes: L(150-350), front width: (60-190)mm, side width: (40-100)mm, (double film pulling possible for longer bags); suitable film width: 240-520mm; product contact parts from: AISI 304 (optional for surcharge AISI 316); power supply: 220V, 50/60Hz; power consumption: 6kW; air pressure: 0.4-0.8MPa; compressed air consumption: 0.3m³/min; dimensions (LxWxH): 2020*1440*2130mm; weight: 780kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty. Bjdpfov Nngrsx Afljlr

Condition: used, Tube forming mill OME 320x8mm (A3782) Tube forming mill OME 320x8mm (A3782) for tube production of 323mm maximum diameter and 8mm maximum wall thickness Make: Ome (Italy) Material: HR, CR, Galv Condition: New Tube Diameter: 168mm – 323mm Wall Thickness: 2mm – 8mm Direction: L-R Speed: 35 meters per minute FORMING MILL Pass N. 1 Driven Forming # 1 Pass N. 2 Driven Forming # 2 Pass N. 3 Driven Forming # 3 Pass N. 4 Driven Forming # 4 Pass N. 5 Driven Forming # 5 Pass N. 6 Driven Forming # 6 Pass N. 7 Side Idle Forming Pass N. 9 Driven Forming # 7 Pass N. 10 Side Idle Forming FIN-PASS SECTION, SINGLE POINT ADJUSTMENT Bsdpfx Aeq Ul Rvsfljlr Pass N. 11 Driven Fin Pass # 1 Pass N. 12 Side Idle Fin Pass Pass N. 13 Driven Fin Pass # 2 Pass N. 14 Side Idle Fin Pass Pass N. 15 Driven Fin Pass # 3 Pass N. 16 Driven Fin Pass # 4 SIZING SECTION Pass N. 26 Driven Sizing # 1 Pass N. 27 Driven Sizing # 2 Pass N. 28 Driven Sizing # 3 NDT Prueftechnik Pass N. 29 Driven Sizing # 4 Pass N. 30 Driven Sizing # 5 STRAIGHTENING AND SQUARING SECTION Pass N. 31 Idle Turkshead #1 Roll holder plates NOT available Pass N. 32 Idle Turkshead #2 Roll holder plates NOT available Pass N. 33 Idle Turkshead #3 Roll holder plates NOT available Pass N. 34 Idle Turkshead #4 Roll holder plates NOT available Tables and tools for rolls change ABB Motors Costamasnaga Reducers Centralized lubrication system Hydraulic Power Unit Complete Mill Portion Automation with diagrams (OTO MILLS/Elletre 2013) Complete hydralic system Fume and Vapors exhaust system with extraction hoods (EUROFILTER) Complete Zinc exhaust system (DONALDSON)

Condition: good (used), Profile steel shears, profile shears, punch, punching machine, hole punch, hydraulic flat/profile and bar steel shears, punching and notching machine -Manufacturer: Mubea, profile steel shear punching and notching machine type HIW 600 -Pressure force: 60 to -Applications: punching, shearing, cutting, notching -Punching: Throat depth 260 mm -Accessories: incl. punching tool, see photos -Dimensions: 1470/960/H2140mm Bljdpfx Aetxkn Usflsr -Weight: 1283 kg

Condition: good (used), functionality: fully functional, year of last overhaul: 2023, EN: For sale a complete and efficient line for profiling steel sheet from tape, e.g. Magnelis, into any profiles, e.g. type C, used in photovoltaic installations and farms, construction of steel halls, shelters as well as for furniture production, etc. Bsdpfju A U Utjx Afljlr The line with the unwinder is located in a heated hall in almost laboratory conditions, for the buyer the possibility of starting it up before purchase, I have contacts to companies that supply sets of profiling rollers for specific profiles as well as to companies dealing with the modernization of such machines in terms of its expansion, etc.

Condition: used, Single column hydraulic press DUNKES type HZT 2,5 Machine No. H94-2558 Year of construction 1994 pressure force 2,5 ton. throat 180 mm table area 420 x 300 mm drop-through opening in table 60 x 185 mm ram surface Ø 40 mm clamping spigot bore Ø 20 mm ram stroke 160 mm Installation height max. 250 mm Rapid traverse downward 65 mm/sec. Rapid traverse upwards 160 mm/sec. Working speed 8,3 mm/sec. Table height above floor 950 mm Hydraulic operating pressure 135 bar Tank capacity hydraulics approx. 100 liters Drive power 1,5 kW Mains connection 400 Volt, 50 Hz Blsdpfxeh Uhqyo Afler - Installation height can be increased by shortening the piston rod by 80 mm - Pressure and travel cut-off - 2-hand operation at the machine - stroke counter - safe press control with 2 monitored hydraulic valves - UVV 11.064 VGB 7.n.5.2 (for manual insertion work) - 32047 read off operating hours - Electrical circuit diagram and hydraulic diagram available space requirement L x W x H 1100 x 980 x 1950 mm weight 700 kg very good condition

Year of construction: 2002, condition: excellent (used), MULTI-PRESS MP.610 6 DIE 6 BLOW Perfect mechanics and electronics ! 12x80 mm 105 mm CUTOFF 170 ppm YEAR 2002 Blsdpsh Rkhnefx Aflsr PERFECTLY WORKING AVAILABLE IN SPAIN SOME PICTURES AND VIDEOS AVAILABLE

Condition: new, Year of construction: 2025, Vertical filling machine for low-viscosity liquids into pillow-bags. Including liquid dosing device. Suitable for laminated compund films like BOPP/PE and others. - Specifications: max. speed of the machine in neutral: 70 cycles/minute; suitable for volumes from 20-100ml; stepless bag length regulation; accuracy: depending on water level product; max. film width: 30-150mm; bag size: max. L50-220xW30-150mm; without air pressure; 220V, 1.7W; stainless steel version (SS201 in housing, contact material part SS304); machine dimensions: L790xW600xH1780mm; weight: 400kg. Blodpfxev Nmy Ro Aflor That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Year of construction: 2025, condition: new, functionality: fully functional, Roll forming line for high trapeze profile 135 mm height. Machine is NEW and fully automatic. Decoiler 15 t (508/620 x 1500) + Roll forming line + Automatic stacker Blsdpfxoxvz Nce Afljr Automatic feeding into the roll forming, without manual hand operating. Line is installed and ready to inspect and test at anytime.

Year of construction: 1992, condition: used, Temperature controller, temperature control device, temperature control device, modular temperature control device, tool heater Bodpopwngbjfx Aflelr -Manufacturer: PSG, temperature control device for tool heating up to 8 control zones -Type: RSD II 8 -P max: 21kW -Transport dimensions: 490/400/H490 mm -Weight: 30 kg

Condition: new, Year of construction: 2025, Automatic roofing sheet forming machine for aluminum or galvanized steel sheet with a sheet width of 1000mm. Includes automatic sheet decoiler, Siemens control system, and technical documentation. Blodpfsw A Rt Hex Aflor

Year of construction: 2024, condition: as good as new (ex-display), Inflatable Pipe Flushing System (Modules A and B) • Unique BET inflatable flushing bladder technology allows the system to be used for multiple pipe sizes • Flushing bladders can be blown out and evacuated as often as required • Manufactured in the USA to the highest quality standards • When inflated, flushing bladders form an airtight seal of the flushing area in pipes of various sizes • Spark-resistant, heat-resistant outer shell Bodpfx Ajv Dunrjfljlr • Heavy-duty inflatable inner shell • Reusable, long-lasting solution for flushing multiple pipes of the same diameter

Condition: used, Year of construction: 2016, functionality: fully functional, machine/vehicle number: M08L/8716, Offer Number: M08L/8716 Machinetype: 7 die - 7 blow warm forming header Info: bushing cut-off , PKO , IFO , 2 forma packs , PNP Transfer Make: NATIONAL FORMAX PLUS Bledpfx Ajwi Sulofljr Type: FXP57S WF Constr. year: 2016 diameter range: 14-22 mm number of dies: 7 number of stations: 8 cutting length: 4-67 mm shaft length under head: 4-75 mm output - pieces/min: 175 press power: 200(126) to max. outside dia. of round pie: 42 mm stroke: 150 mm Location: In our warehouse

Condition: new, Year of construction: 2025, Vertical filling machine for liquids OR pastes into pillow-bags. Including liquid dosing device (for high OR low viscosity liquids/pastes). - Specifications: max. speed of the machine in neutral: 50 cycles/minute; suitable for volumes from 0-1000ml; filling temperature: up to 80°C; accuracy: +/- 1.0% (depending on product); max. film width: 430mm; bag size: max. 340x210mm; 1.5m³, 6bar; 220V, 4.8kW. SCHNEIDER film pulling motor, PANASONIC/Autonics print mark sensor, 7" touchscreen, OMRON PLC, FESTO pneumatic parts (horizontal seal), other parts from AIRTAC, OMRON 4 way temperature control, electronic parts from SCHNEIDER / OMRON. Stainless steel version (SS304), including hot printer (2 lines, 10 characters). Dosing equipment: Pump with filling range of 100-1000ml, 40 liter hopper tank with double wall with warm water circulation. Machine dimensions and weight: L1080xW1300xH1400mm, 550kg Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty. Bljdpsv Nmzusfx Aflsr

Year of construction: 2010, condition: used, Decoiler 10 t + Roll forming line + stacker Blodpoxvz Ifofx Aflsr Available for inspection. Fully functional

Condition: used, Section steel shears, profile shears, punch, punching machine, hole punch -Pressure force: 29 to -Punching: -Scissors: -to cut: -not: -mechanical release: -div. Punches and dies: -Length stop: -Installation dimensions: 1300/1570/H1900 mm -Transport dimensions: 1300/770/H1900 mm Bledpfxef Ek H Uo Afljr -Weight: 1112 kg

Condition: excellent (used), Year of construction: 1994, functionality: fully functional, Equippment: 1 pce. BIHLER control system P-CNC 200 1 pce. BIHLER Accustic cabine 2 pcs. Grip feeder system right hand side 1 pce. Grip feeder system left hand side 4 pcs. Width slide units (welding press slides) 1 pce Welding sytem BIHLER B 1000 Working range: Bjdewxarqjpfx Aflelr wire diameter range: 0,5 - 3,0 mm strip metal width: max. 40 mm feeding length: max. 240 mm output: max 400/min

Year of construction: 2005, condition: used, functionality: fully functional, Roll forming line for high trapeze profile 85 mm height. Machine is fully functional. Bedpfx Afexvz Hhslslr Line is installed and ready to inspect and test at anytime.

Condition: used, Year of construction: 1992, Temperature controller, temperature control device, temperature control device, modular temperature control device, tool heater -Manufacturer: PSG, temperature control device for tool heating up to 8 control zones Bljdpjudqb Ajfx Afljr -Type: RSD II 8 -P max: 28 kW -Transport dimensions: 490/430/H460 mm -Weight: 30 kg

Condition: used, Section steel shears, profile shears, punch, punching machine, hole punch -Pressure force: 40 to -Punching -Scissors -to cut -notch -mechanical release -Foot switch: 1 Bljdpfocc Ubujx Aflor -div. Punches and dies -Dimensions: 800/1250/H1800 mm -Weight: 1112 kg