Used Fold for sale (5,396)

Condition: used, Year of construction: 1997, Combination folding machine - Round pile feeder R-76 - MPC control panel at the feed table Ksdpfx Adsx R Tl Ijdsdg - VACUBELT suction belt infeed - First folding station with 6 automatic folding pockets - downstream knife shafts - KTL cross-folding unit with 2 folding knives - horizontal folding pocket after the first knife - control panel at the cross-folding unit - noise reduction hood - maintenance-free and quiet belt drive - DESTA FSA-800 vertical stack delivery with pressing station - compressor

Condition: used, Year of construction: 2001, Combi Folding Machine Kdedpsx R Tluefx Addjg - Fi-55 flat pile feeder with TREMAT separating head - 1st parallel folding station with 4 combi fold pockets - downstream knife shafts - KTL crossfold unit with 2 folding knives - 1 horizontal pocket after the first folding knife - FFP pneumatic window fold pocket - ACC-2.4 control unit (for window fold pocket or gluing device) - noise reduction hood - central control panel DCT-500 - SA-66-K/MP.D shingled stream delivery with press station and marking device, year 2000 - compressor

Condition: good (used), Year of construction: 2013, Operating hours: only 14,500 - Format size – max. 750 x 1050 mm, min. 350 x 400 mm - Net die cutting area: 727 x 1050 mm - Materials: - Paper, min. 80 g/m² - Cardboard & solid board, up to 1400 g/m² - Corrugated board (B-flute) up to 4 mm - Die cutting pressure, max. 300 tons - Speed, max. 7,500 sheets/h - Pile height at feeder: 1000 mm (non-stop) Equipment & features: - Fully automatic die cutting, creasing, and embossing machine - Touch screen control panel - Stripping station for internal waste as well as side and rear edges - Centerline system - Small format device: minimum 300 x 350 mm - Non-stop automatic sheet feeder with pre-piling system - Non-stop standard delivery - Register system in feeder and die cutting station - Mechanical double sheet detector - Side lays on operating and drive side, switchable between pull and push lay - Four active front lays with sensors for sheet infeed control - Independent fine adjustment of front lays for drive and operator sides - Gripper margin adjustable, 10–18 mm - Delivery section with gripper margin removal - Stripe inserter in the delivery - Centralized and automatic chain lubrication - Two standard stripping frames - Two die cutting chases - Die cutting plate, 5 mm - Screw compressor Varimatrix 105-CS Kjdpfx Adjx R Tiaedodg Note: All technical terms and specifications are provided as per industry standards for machinery listings in the printing and packaging sector.

Condition: ready for operation (used), Year of construction: 2000, sheet width 2520 mm plate thickness 4.0 mm ST thickness at "Niro-steel" 2.0 mm upper clamping bar adjustment 250 mm adjustment speed 100 mm/sec Adjustment folding beam 80.0 mm work height max. 869 mm control POS 2000 voltage 400 V total power requirement 6.0 kW weight 4100 kg range L-W-H 4120 x 2400 x 2090 mm current list price ~ 90.000 euro Kdjdpjx H Alcofx Addeg from a maintenance workshop with excellent equipment (!!) new touchscreen installed in 2023 - in checked conditoins - machinevideo - ?v=5Y2NheJjdWo Features: - CNC electro-motorized universal bending machine * ??High-precision mechanics with modern control technology * For individual and series production * Robust high-speed machine with high axis speeds * Torsion-resistant welded construction - SCHRÖDER CNC control model POS 2000 * Control panel front right (operable with PC mouse) * Touchscreen replaced in 2023 * Color display * USB interface * Automatic cutting calculation * Material and tool library * Dimensionally accurate bending simulation * Windows XP operating system * Swiveling control, front right - Servo inverter-controlled drives * For bending/upper beam & electric backgauge - CNC motorized lower beam adjustment - CNC electro-motorized Backgauge * Travel speed 300 mm/sec. * with rear sheet metal support surface - 1x freely movable double foot switch - Operating instructions (PDF) * Optional accessories included: - SCHRÖDER split gouge tools - top

Year of construction: 1969, condition: used, Swivel bending machine Albert steel TYpABK 400 /5 useful length 2530 mm Sheet thickness 5 mm Kdjdpfxeh Rkh Ds Addeg

Condition: used, Year of construction: 1982, Technical details: sheet width: 1500 mm plate thickness: 1,5 mm distance between columns: 1760 mm knife length: 152 mm bending angle max.: 160 ° total power requirement: 1,3 kW Weight approx.: ca. 800 kg dimension machine xH: 2,5x0,7x1,5 m - adjustment of the upper cheek 350mm - adjustment of the bending cheek / lower cheek 60/60 motoric - bending edge up to max. 10mm radius - without back gauge - upgrade possible -manual counter - foot pedal (pedal left/right) accessories: - 1 set tools Kodeu Ibzwepfx Addsdg *

Condition: used, Technical details: plate width: 1000 mm plate thickness: 1 mm distance between columns: 1220 mm knife length: 1030 mm stroke adjustment: Oberwange: 100 mm stroke adjustment: Biegewanne: 45 mm bending angle max.: 140 ° weight of the machine ca.: 0,65 t dimension machine xH: 1,8 x 0,6 x 1,1 m - This swivel bending machine is equipped with two rear supports. Size of the round steel support = Ø 25 x 750mm, with linear scale. - Left side with counterweight. * Kodpfxeu Ibz Rj Addodg

Condition: used, Year of construction: 1992, Technical details: plate width: 1550 mm plate thickness: 2,5 mm Kjdsu Ib Anjpfx Addodg distance between columns: 1630 mm knife length: 1550 mm stroke adjustment: Oberwange: 90manuell / 70hydr. mm stroke adjustment: Unterwanne/Biegewanne: 105 manuell mm stroke adjustment: Biegewage: 40 mm bending angle max.: 93 (L-/Z-biegen) und 180° Zufalten ° back gauge: nein - no total power requirement: 4,5 kW weight of the machine ca.: 1,8 t dimension machine xH: 2,6 x 1,1 x 1,7 m dimensions of hydaulic: 1400 x 700 x 1480 mm This is a hydraulic swing bending machine bending capacity 2,5mm with approx. 400N/mm² strength Hydraulic OILTECH with approx. 200 liters *

Condition: used, Technical details: plate thickness: 1 mm distance between columns: 2,255 mm bending angle max.: 130 ° total power requirement: 2,25 kW Weight approx.: 1400 kg dimension machine xH: 2,7 x 1,15 x 1,3 m Machine without foot switch but this is pre-equipped the upper beam was converted to 60 mm adjustment by the previous owner higher is only possible when dismantling Ksdpfxswq I U Rs Addsdg for automatic operation the foot control is missing manual operation O.K. No backgauge *

Condition: used, Year of construction: 1988, Technical details: Kdodsu Ib Dfjpfx Addjg plate width: 2050 mm plate thickness: 2 mm distance between columns: 2400 mm knife length: 2050 mm stroke adjustment: oben 250 mm adjustment of stroke: unten 100 mm bending angle max.: 180 ° back gauge - adjustable: mit Aufnahmeschienen mm working pressure: 5,0 MPa total power requirement: 2,2 kVA weight of the machine ca.: 2,3 t dimension machine xH: 3,5 x 1,0 x 2,2 m dimensions of hydaulic: 0,75 x 0,55 x 0,80 mm HYDRAULIC FOLDING MACHINE operation via control panel with boom as well as via foot switch bending angle: sharp bending = up to 135° with 2mm sheet metal stroke of the upper beam = 250mm stroke of the lower beam = 100mm bending jaw stroke = 100mm bending gap = 7mm with scale display *

Condition: used, Year of construction: 2001, Lippert Belt Conveyor Folding Belt Switch track conveyor belt 1045-650-500 RA1366 The Lippert conveyor belt is from 2001 and in good (used) condition. The belt conveyor has a SEW motor with MOVIMOT frequency inverter to control the speed. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures of the conveyor system shown here were taken in a logistics center while still installed. The conveyor belt was used as a folding belt. Folding device was removed during dismantling. On request, we can also supply this conveyor belt as a folding belt version. Technical data: Conveying length (NL): 1045 mm Framework width (NB): 650 mm belt width (GuB): 500 mm height (BH): 105 mm support feet: optionally available Conveying speed (v m/s): adjustable up and down with frequency converter Drive: SEW gear motor R17 DT71D4/MM03/BW1 Electrical data: 50 Hz V380-500, kW 0.075 / 0.37 / S1 Deflection roller (UR): Ø = 34 mm Drive drum (AT): Ø = 64 mm Kodok Aa Txepfx Addedg Belt: Type SNB 5 E Year of construction: 2001 Optionally available: Supports Side guide one and both sides Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2001, Lippert Belt Conveyor Folding Switch track 1360-750-600 RA1590 The Lippert conveyor belt is from 2001 and in good (used) condition. The belt conveyor has a SEW motor with MOVIMOT frequency inverter to control the speed. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Conveying length (NL): 1360 mm Frame width (NB): 750 mm belt width (GuB): 600 mm height (BH): 105 mm Belt height: 550 mm total height: 1070 mm basic dimensions: 1170x900 mm Tilt height difference: 300 mm Conveying speed (v m/s): 0,05-1,5m/s Drive: SEW gear motor S37 DT71D4/MM03/BW1 Electrical data: conveyor belt motor: 50Hz V380-500, kW 0.075 / 0.37 / S1 Tilting motor: 50Hz V220/400, kW 0.55 / S1 Deflection roller (UR): Ø = 42 mm Drive drum (AT): Ø = 64 mm Belt: Type XVT-2128 Year of construction: 2001 Optionally available: Supports Side guide one and both sides Prices net ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Kdodpfx Ask Abdpsddjg Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2001, Lippert Belt Conveyor Folding Belt GF 1360-750-600 RA1829 The Lippert conveyor belt is from 2001 and in good (used) condition. The belt conveyor has a SEW motor with MOVIMOT frequency inverter to control the speed. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Conveying length (NL): 1360 mm Frame width (NB): 750 mm belt width (GuB): 600 mm Ksdpfsk Abgvox Addsdg height (BH): 105 mm Belt height: 550 mm total height: 1070 mm basic dimensions: 1270x1180 mm Tilt height difference: 300 mm Conveying speed (v m/s): 0,05-1,5m/s Drive: SEW gear motor S37 DT71D4/MM03/BW1 Electrical data: conveyor belt motor: 50Hz V380-500, kW 0.075 / 0.37 / S1 Tilting motor: 50Hz V220/400, kW 0.55 / S1 Deflection roller (UR): Ø = 42 mm Drive drum (AT): Ø = 64 mm Belt: Type XVT-2128 Year of construction: 2001 Optionally available: Supports Side guide one and both sides Prices net ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2001, Lippert Belt Conveyor Folding Belt Switch track conveyor belt 1090-650-500 RA1399 The Lippert conveyor belt is from 2001 and in good (used) condition. The belt conveyor has a SEW motor with MOVIMOT frequency inverter to control the speed. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures of the conveyor system shown here were taken in a logistics center while still installed. The conveyor belt was used as a folding belt. Folding device was removed during dismantling. On request, we can also supply this conveyor belt as a folding belt version. Technical data: Conveying length (NL): 1090 mm Framework width (NB): 650 mm belt width (GuB): 500 mm height (BH): 105 mm support feet: optionally available Conveying speed (v m/s): adjustable up and down with frequency converter Drive: SEW gear motor R17 DT71D4/MM03/BW1 Electrical data: 50 Hz V380-500, kW 0.075 / 0.37 / S1 Deflection roller (UR): Ø = 34 mm Drive drum(AT): Ø = 64 mm Belt: Type HSL-8E Year of construction: 2001 Characteristic / Accessories: Design as folding belt possible on request Optionally available: Supports Side guide one and both sides Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Kdjdpfxek Aa Ugj Addeg Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, The Stahl T 52.3T/4-F-KB is a high-performance folder-gluer currently in operation at a printshop in Germany. Designed for efficiency and precision, this machine is equipped with four buckle plates and one knife, making it ideal for a wide range of folding and gluing applications. Kdodpfoxmi Emex Addeg With a 520 mm working width, the T 52.3T/4-F-KB handles various box and carton formats, ensuring versatility for packaging production. The integrated flat pile feeder streamlines material handling, improving workflow and productivity. This folder-gluer is a reliable solution for businesses seeking consistent, high-quality finishing. Format: 520 mm Equipment: 4 buckle plates 1 Knife Flat pile feeder

Condition: new, Year of construction: 2025, Our work is based on appreciation, fairness and transparency. With these core values, we support our customers until they achieve their goals. Hydraulic press brake ZGR 2140H/3.0mm the maximum working length: 2140 mm Bending capacity: 3.0 mm (steel) Bending beam thickness: 30 mm Bending angle: max 145 degrees Upper beam opening: 80 mm Weight: approx. 1300 kg CE marking Guarantee: 12 months Delivery date: up to 4 weeks from the order date We are looking forward to your contact! Kedpfecri E Njx Addsdg

Condition: used, offer consists of: KL 112 roller - for Herzog + Heymann folders working width 35cm Kdedpfeu Sr Ipjx Addeg We can also organize the following for you: packaging, loading, transport ( by ship or plane) including customs

Condition: used, offer consists of: New roller (knurled part 810mm) - for MBO folders Kdjdpsu Sr Rqjfx Addeg working width 78cm We can also organize the following for you: packaging, loading, transport ( by ship or plane) including customs

Condition: used, New roller Kjdpsu Stchjfx Addodg - for Stahlfolder/Heidelberg folders New roller, hand wheel: working width 36cm New roller: working width 36cm New roller, hand wheel: working width 40cm New roller: working width 40cm New roller, hand wheel: 52cm New roller: working width 52cm New roller: working width 56cm New roller: working width 66cm New roller: working width 78cm New roller: working width 82cm New roller: working width 94cm We can also organize the following for you: packaging, loading, transport ( by ship or plane) including customs

Condition: used, offer consists of: New roller - for Stahlfolder/Heidelberg folders working width 56cm working width 66cm working width 78cm Kjdpfx Adou Stcbjdedg ball-bearing for rollers: working width 40-94 cm We can also organize the following for you: packaging, loading, transport ( by ship or plane) including customs

Condition: used, offer consists of: New roller included ball-bearing - for Horizon folders Kdodpfx Adsu Sr S Usdsg working width 56cm We can also organize the following for you: packaging, loading, transport ( by ship or plane) including customs

Condition: used, offer consists of: New roller - for MB Bäuerle folders working width 38cm working width 52cm We can also organize the following for you: packaging, loading, transport ( by ship or plane) including customs Kdedpfx Adju Stc Uodsg

Condition: used, offer consists of: New roller (knurled part 810mm) - for MBO folders Kdjdpjxr Ag Ijfx Addsg working width 78cm - 435€ / pc. We can also organize the following for you: packaging, loading, transport ( by ship or plane) including customs

Condition: used, offer consists of: KL 112 roller - for Herzog + Heymann folders Kdedsxr Ag Ujpfx Addjg working width 35cm - 325€ / pc. We can also organize the following for you: packaging, loading, transport ( by ship or plane) including customs

Condition: used, offer consists of: New roller - for Stahlfolder/Heidelberg folders New roller, hand wheel: working width 36cm - 415€ / pc. New roller: working width 36cm - 320€ / Stck. New roller, hand wheel: working width 40cm - 415€ / pc. New roller: working width 40cm - 350€ / pc. Ksdpfx Ajxr Ad Hoddjdg New roller, hand wheel: 52cm - 415€ / pc. New roller: working width 52cm - 350€ / pc. New roller: working width 56cm - 365€ / pc. New roller: working width 66cm - 400€ / pc. New roller: working width 78cm - 435€ / pc. New roller: working width 82cm - 440€ / pc. New roller: working width 94cm - 485€ / pc. We can also organize the following for you: packaging, loading, transport ( by ship or plane) including customs