Used Forest Machine for sale (83,481)

Condition: used, Year of construction: 2001, functionality: limited functionality, feed length X-axis: 30,000 mm, feed length Y-axis: 2,400 mm, feed length Z-axis: 500 mm, FOR SALE 3 3 Forest gantry milling machines as discussed. Below are the specifications for these machines: - Models: Type V2 2500 EAS and Type V3 2300 AS - Capacity: 30,000 mm (X) x 2,400 mm (Y) x 500 mm (Z) - Equipment: Equipped with 2 heads Ihodpox R Ta Esfx Addot REFURBISHED IN 2001 CNC NUM 1060 General Specifications Below are the common specifications of the machines discussed: Models concerned: Forest Type V2 2500 EAS and Type V3 2300 AS. Working dimensions (Capacity): X axis (longitudinal): 30,000 mm (30 metres). Y axis (cross): 2,400 mm (2.4 metres). Z axis (vertical): 500 mm (0.5 metres). Head configuration: The machines are equipped with two machining heads.

Condition: refurbished (used), Year of construction: 1999, travel distance X-axis: 11,450 mm, travel distance Y-axis: 3,500 mm, travel distance Z-axis: 1,250 mm, Technical description Value Unit Travel distance X-axis: 11,450 mm Y-axis: 3,500 mm Z-axis: 1,250 mm Cross-section of the Z-axis slider: 360 x 360 mm Portal aperture: 3,000 mm Height under vertical spindle: 1,400 mm Working clamping width: 2,500 mm Milling unit: Type FA 305 C Power: 30 kW Max. torque: 1,070 Nm Max. speed: 4,000 rpm Cross section of the pusher: 360 x 360 mm Vertical head with spindle Power: 30 kW Max. speed: 4,000 rpm Max. torque: 1,070 Nm Rapid traverse in X, Z: 25,000 mm/min Rapid traverse in Y: 20,000 mm/min Work feed infinitely variable in X, Y and Z: 10,000 mm/min Compressive force of each axis: 25,000 N Tool holder: SK 50 Horizontal angle head with 144 x 2.5° pitch, with SK50 spindle Available power: 30 kW Max. speed: 4,000 rpm Max. torque: 1,070 Nm Positioning increment: 2.5 degrees Longitudinal pallet system 1 pallet shuttle with 2 storage stations Ihsdetix S Nepfx Addjt 1 manual pallet transfer system between machine and shuttle 2 workpiece holder pallets: 5,000 x 2,500 mm Tool changer Chain magazine: 80 positions Distance between the positions on the chain: 130 mm Diameter of consecutive tools: 125 mm Tool diameter max.: 200 mm Maximum tool length: 400 mm Tool weight max.: 25 kg Tool change time, tool to tool: 8 sec Tool change time, chip to chip: 38 sec Equipment: Cooling devices: - Cooling via orientable nozzles - IKZ / cooling through the center of the spindle, 3,000 l tank, capacity: 30 l/min, pressure: 7 bar at the mold 2 chip conveyors: 1 Portal cladding Measuring probe, make: RENISHAW, type: MP14 Electronic handwheel Remote diagnosis Tool management and wear management Documentation in 2 copies: German / French CE marking Very well maintained, continuously serviced condition!

Condition: new, Year of construction: 2025, total width: 2,400 mm, total height: 18,000 mm, total length: 3,000 mm, warranty duration: 12 months, overall weight: 700 kg, power: 1 kW (1.36 HP), Automatic Pallet Nailing Machine for Wooden Pallets PT 1000 Plus – Polish Manufacturer. 100% brand new equipment. The nailing machine utilizes CN coil nailers for nails in coils. Device description: The nailing machine consists of a single working table. The finished pallet is ejected on the opposite side of the machine, allowing for easy integration with the Forest PT 16 stacker. This configuration ensures full utilization of the device. Capable of nailing pallets with: Ihjdpjm E Np Uefx Addjt • Deck with 5 boards + 3 bottom boards • Deck with 6 boards + 3 bottom boards • Deck with 7 boards + 3 bottom boards • Deck with 9 boards + 3 bottom boards • Pallets with stringers (runners) Possible pallet dimensions: max 1200x1200mm, min 600x600mm - Dimensions: length 3000cm, width 2400cm, height 1800cm - Quick adjustment for pallet size – height is automatically set; deck boards do not need to be perfectly uniform in thickness. - Simple operation with flexible nail placement and selectable nailing mode and quantity per joint - Standard configuration includes 8 nailers, with option to install up to 10 units.

Condition: as good as new (ex-display), Block band saw Hauslhof CTR800S, demonstration machine Isdpfx Ajvr I Rieddoht Serial No. 69/21/007 The machine has the following accessories: 2 x extension section for block saws CTR800S, 3 m Ammeter for CTR Saw band guide electrically adjustable for CTR Irrigation pump with automatic switch-on for CTR Saw band tensioning device hydraulic Pre-cutting device

Condition: new, The TITAN 43/20 CD+E firewood processor with joystick control cuts logs with a maximum diameter of ø 43 cm using a harvester bar and splits them with a splitting force of 20 tons. This is a combination machine (electric and PTO connection). Demonstration and inspection by appointment possible – the machine is currently in stock and available immediately. Warehouse clearance – special price – interim sale reserved. Ihodotrmg Hepfx Addst

Condition: as good as new (ex-display), Demonstration machine Robust band saw for logs up to 71 cm in diameter with extendable rail sections—extension is unlimited. Automatic feed with continuously variable speed. Electric height adjustment controlled from the operator panel. 3.8-inch touch LCD display for height adjustment. Saw unit suspended on both sides for increased stability and improved precision. CE certified. Technical data: Max. log diameter: 71 cm Max. board width: 67 cm Motor output S1: 5.5 kW Cutting length, base version: 2.1 m Cutting length, extension section (optional): 3 m, 1 m Weight: 550 kg Extras not included in the price (sample image). Isdevr I Rcopfx Addoht

Condition: used, OR71F grinding machine including base frame, year of manufacture 2022, 250 W, 66 kg Iodpovrvkwefx Addoht Prices subject to change, errors, printing and typesetting errors reserved

Condition: used, Serial number: 10641xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21529 Ihsdpfx Asxm Tfkoddjt Description: We have a Topcon fc 5000 and hiper sr w/charging, case and pole for sale. GPS has a top network and service agreement that can be transferred upon sale, according to the owner. Everything works as it should. Ready for delivery

Year of construction: 2013, operating hours: 702 h, condition: used, Power: 17 kW (23 HP) Make of engine: Briggs & Stratton, Vanguard General condition: good Technical condition: good Visual appearance: good Please contact Christian Theißen for more information Manufacturer: Rapid Model: 430 Year of build: 2013 Condition: Used Data: Total dimensions LxWxH: 2046 x 1190 x 1200 mm Drive type: Benzin, 17 kW / 23 PS Engine: Briggs & Stratton, Vanguard Hours: 702,5 Weight: 410 kg Special features: Briggs & Stratton 2-cylinder four-stroke gasoline engine with 23 HP, Transmission: continuously variable hydrostatic drive with single-disc dry clutch, Steering column: tool-free height adjustable, Steering: steering brake system, Tires: 23x8.50 - 12AS, Fuel: gasoline, Weight: approx. 215 kg, Auxiliary control unit for hydraulics, Year of manufacture: 2014 / Lipco mulching device (flail mower), Type: ME 104-LZ, Weight: 170 kg, Year of manufacture: 2014, Working width: 1 m. Price on demand Location: 41468 Neuss: immediately available Ijdpfx Aoxgti Aeddeht

Condition: used, functionality: unexamined, Year of construction: 1999, operating hours: 26,000 h, 1999 Valmet Forwarder 860 Iedpjv Iynfsfx Addjht 2 x new komatsu computers fitted 2024 Cranab Crane Good working order

Condition: used, functionality: fully functional, Year of construction: 2020, overall weight: 530 kg, machine/vehicle number: S80010003, Equipment: hydraulics, HUMUS PH1350 FORESTRY MULCHER Mounting: front, rear or excavator/arm Forestry rotor with hydraulic drive, suitable for front mounting on wheel loaders, crawler or mobile excavators Axial piston motor | 55 to 110 l IDEAL FOR EXCAVATOR MOUNTING 2 UNITS AVAILABLE - ACT FAST! Proven applications: • Mulching of wood and vegetation • Ditches and embankments • Area and landscape maintenance • Municipal use • Pasture maintenance • Recultivation • Infrastructure operations • Route maintenance Ihodpfxexlg Aas Addst • Biotope management • Verge maintenance • Restoration of natural habitats Housing with perforation pattern for fast assembly Overload protection via flexible V-belt drive Rotor tube diameter: 450 mm Cutting height adjustable up to 5 cm using skid shoes Replaceable skid shoes made of Hardox® wear plate Wide ejection width of mulched material Rotor with working depth limiter 2 replaceable counter blades in the housing Overload protection

Year of construction: 2015, operating hours: 3,500 h, condition: used, Serial number: 0xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21919 Ihedpjxz N A Isfx Addot Specifications: 2015 model Approx. 3,500 hours 119 kW Operating weight: 9,740 kg Undercarriage (see photos) Track width: approx. 50 cm Machine width: approx. 200 cm Prinoth M550 from 2019 Rear-view camera Good working lights Radio/CD Climate control/AC Description:Prime Tech self-propelled mulcher from 2015.The mulcher is in good working condition and has no known faults.It has approx. 3,500 operating hours.Can be delivered at short notice.See video! Hours: 3500 Own weight: 9740 Model: PT-175 dyrkningsfres SE VIDEO

Condition: used, Please contact ATS Norway for more information Please provide reference number upon request: 21931 Specifications: Year model uncertain Weight: 1785 kg 400 volts Ihodpfx Asx Anccoddot Ready for delivery Description:Trenchin SN 50 C lathe with some equipment.The lathe has seen little use and has been well maintained.Ready for delivery. Own weight: 1785

Condition: ready for operation (used), Year of construction: 2007, XYZ SMX SLV 3 Axis Turret Milling Machine ProtoTRAK | SMX Control (2007) 3 Axis CNC Capacity (X Axis, Y Axis & Quill) Spindle Taper ISO 40 Spindle speeds to 70 - 3600 RPM Table Size 1473 x 305mm Table Travel: X - 1000mm Y - 410mm Knee Travel: Z - 413mm Quill Travel Z - 127mm Air Power Draw Bar Supplied with a range of spindle tooling Coolant Year of Manufacture: 2007 Weight: 1850 Kgs Power Requirements: 18A *For sale with Jet Machinery Ltd* Jet Machinery Stock No: #79109 Machine Serial Number: 12308 Cost: £14,950.00 + VAT Ihodpfx Aox Tiq Ssddot Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: like new (used), Thom Type SI Spout Inser­ter Machi­nes for inser­ting the spouts into pre­fa­bri­ca­ted pou­ches. Model - Thom SI‐900 Semi­au­to­ma­tic machi­ne Ide­al for sam­ple pro­duc­tion and small series pro­duc­tion Ihodpfox Utd Eex Addot Capa­ci­ty: Up to 10 pou­ches / min. Thom fil­ling and packa­ging machi­nes are in demand ever­y­whe­re whe­re fle­xi­ble packa­ges need to be fil­led (pou­ches / refills): in the food indus­try, the cos­me­tics and deter­gents indus­try or in the beverage fil­ling.

Condition: excellent (used), Year of construction: 2021, turning diameter over cross slide: 840 mm, turning length: 6,000 mm, spindle bore: 105 mm, rapid traverse X-axis: 5,000 m/min, rapid traverse Y-axis: 7,000 m/min, 3 chuck SCHUNK ROTA-S Plus 500-102 3 x Steady rest fixed Revolver VDI Duplomatic Siemens 840 DSL This type of lathe is commonly used in industries like: Oil & gas (pipe threading, tool joints) Steel industry (roll turning)  Power generation (turbine shaft turning)  Heavy machinery manufacturing DBC Turning Length: 6000mm Swing over bed Ø: 840mm Swing over cross slide Ø:570mm Spindle bore: 105mm Spindle power: 33kW Bed width: 450mm Tailstock spindle Ø: 220Ø Spindle taper: 5Mk Speeds / ranges: 1200Rpm Ihsdpfxjx Sqaxj Addjt Feed rate X-Axis: 5000mm/min. Feed rate Z-Axis: 7000mm/min. Workpiece load: 2500 Length: 9500mm Width: 2300mm Height: 2300mm Weight: 8600kg

Condition: new, Year of construction: 2023, functionality: fully functional, 5-axis travelling column machining centre - SAMAG SFZ3500- with swivel head and internal rotary table (Ø:1000mm, interference Ø:1300mm) X:3500mm Y:1000mm Z:1000mm Iedpfsttv Hasx Addsht Spindle: SK50 max. 12,000rpm 54kW Tool changer: 60 Control: Heidenhain TNC7 Coolant system with paper belt filter Internal coolant supply: 40bar (max. 80bar) Internal air supply through the spindle 3D touch probes Collision monitoring (DCM) Kinematics Opt The machine is available at short notice and can be inspected and tested at the factory.

Condition: good (used), Year of construction: 2018, Table 1473 x 305mm, Traverses XYZ: 1000 x 410mm x 400mm (knee), Isdpfxexftqde Addjht quill travel 127mm, Spindle Taper ISO40, Power Drawbar, Spindle Motor 5HP, Spindle Speeds 70 - 3600rpm, Prototrak SMX CNC Control,

Condition: new, Year of construction: 2026, functionality: fully functional, Cost savings for the end user €80,000 vs. €40,000 DMA supplies high-quality CNC machines at bottom prices by eliminating expensive service contracts and on-site installation visits. Ideal for professionals who prefer to remain in control themselves. The purchase price includes: - CNC control “SYNTEC” - CNC Nesting/Milling CadCam - PEGASUS Professional CadCam including online training/helpdesk - Starter kit of cutting and drilling tools for sheet metal machining CNC machining centers. • Parts supply: In the event of a defect within 12 months, components will be shipped free of charge after diagnosis (photo/video). • Excluding labor costs: Replacement of the part is done by you or outsourced at your discretion. • Designed with minimal maintenance requirements • Digital preparation: via app or TeamViewer for direct online service. This makes technician visits unnecessary, resulting in significant cost and time savings. Iedpfx Adjxx Uc Uedeht • Online service: 24/7 Digital Support as an Alternative • Video manuals: Clips covering calibration or part replacement • Exploded view diagrams: Instantly identify the necessary component Focus on functionality: Your machine, your management, our lowest price. You can call or WhatsApp us for more information and/or to make an appointment. WhatsApp:

Condition: excellent (used), Year of construction: 2016, XYZ 1020 Surface Grinding Machine Mag’ Chuck 250 x 500mm Spindle Speeds 3000rpm Spindle Motor 2Hp Standard Grinding Wheel Dia. 180mm Standard Wheel Bore 31.75mm Max. Longitudinal Grinding Travel- 500mm Max. Cross Grinding Travel - 250mm Ihedpfx Aox S Ru Aeddet Max. Distance from Table Surface to Spindle Centre - 500mm Max. Longitudinal Travel – 558mm Longitudinal Travel Speed Range 5-25m/min Cross Travel Increments 0.15 – 15mm Cross Feed per Handwheel Revolution 4mm Cross Feed per Handwheel Graduation – 0.02mm Down Feed Per Handwheel Revolution 2mm Down Feed Per Handwheel Graduation 0.01mm *For sale with Jet Machinery Ltd* Jet Machinery Stock No: #79111 Machine Serial Number: 1624045 Cost: £11,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Year of construction: 1998, condition: good (used), CHEVALIER FSG 1640 AD SURFACE GRINDING MACHINE MAKE CHEVALIER, MADE IN TAIWAN MODEL FSG-1640 AD YEAR 1998 TABLE SIZE 1000 x 400 mm Ihsdoirfpgspfx Addet GRINDING WHEEL SIZE 445 mm TRAVERSES 400 x 1000 mm MAX HEIGHT FROM TABLE TO SPINDLE CENTRE 445.0 mm TOTAL POWER REQUIRMENT 7.4 kW PLUS AUTOMATIC DOWN FEED WHEEL-MOUNTED WHEEL DRESSER SYSTEM HYDRAULIC MOVEMENT COOLANT SYSTEM 400.0 x 1000.0 mm ELECTRO MAGNETIC CHUCK MACHINE MANUALS

Condition: good (used), Year of construction: 2001, In good technical condition and fully operational. Manufacturer: Rollsett Machine Oy Finland. Year of manufacture: 2001. Profile height: 18 mm. Entry width: 1,250 mm. Overall width: 1,146 mm; 1,166 mm. Construction width: 1,100 mm. Min./max. length: 0.5 lm/8 lm at a thickness of 0.50 mm. Accessories, aids: screws, sealing tapes, profiled seals, anti-condensation treatment, light profiles. Ijdpfx Aox Tf Itsddsht

Condition: used, Year of construction: 2022, functionality: unexamined, CNC long-bed machining center, model CMA 3RD-CNC, year of manufacture 2022, serial number 4063. The machine is suitable for drilling, thread cutting, milling, and other machining processes on large-format workpieces. Equipped with a robust steel frame construction and industrial PC-based control system from Omron. Features: Spindle: 13.1 kW, BT-40 taper, speed approx. 2,000–6,000 rpm. Rapid traverse speed: X and Y axes up to 30 m/min. Travel distances: X = 6,000 mm, Y = 600 mm, Z = 450 mm. Drilling capacity: Ø22–Ø42 mm. Thread cutting up to M30. Table width: 580 mm with T-slots. Electrical: 400 V, 50/60 Hz, 32 A, 3-phase. Control voltage 24 V. Weight approx. 7.2 tons. Includes tool changer with carousel magazine. Iodpfx Adex N Ncgedoht

Condition: excellent (used), Year of construction: 2011, XYZ Proturn SLX 355 ProtoTRAK CNC Gap Bed Centre Lathe ProtoTRAK SLX Control (2011) Max’ Distance Between Centres 1000mm Max’ Swing over Cross-slide 225mm Max Swing over Bed 360mm Spindle Bore 52mm Spindle Speeds 50 – 4000 rev/min Spindle Motor 5.75Kw Quick Change Tool Post Tailstock MT4 Tailstock Dia’ 75mm Tailstock Travel 160m Manufactured | 2011 Supplied with: Iodpex D U Arjfx Addjht 3 Jaw Chuck Interlocking Chuck & Main Guards Machine Manuals 3 Toolholders (More available if required). TRAKing Constant Surface Speed Coolant Worklight Auto Lubrication For Sale with Jet Machinery Ltd Jet Machinery Stock No: #79003 Machine Serial Number: SL281 Cost: £22,500.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Year of construction: 2021, XYZ RMX 3500 3 Axis CNC Bed Milling Machine ProtoTRAK RMX Control YOM 2021 Spindle: 5HP – Programmable 40 – 5000rpm Ihsdpfox D Tbmsx Addst 2 Ranges 40 – 600 & 300 – 5000rpm ISO40 Quill Dia 105mm Table: 1370 x 355mm 4 0ff T Slots T Slot size 15.9mm Max load 600kgs Travel: X – 787mm Y – 508mm Head Vertical (Z) – 500mm Quill (Z) 127mm Dims without travel – 1905 x 2069 x 2225mm Dim with travel – 2758 x 2869 x 2490mm Weight 2430Kgs Power Requirements 22A Air Requirements 6bar YOM 2021 For Sale with Jet Machinery Ltd Jet Machinery Stock Number: #78900 Machine Serial Number: RM310097 £35,000.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.