Used Bruderer for sale (63)

Condition: good (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 53, Bruderer BSTA 18 PH1000 E (2000) – For Sale Well-maintained Bruderer BSTA 18 PH1000E from 2000 in good condition. The machine is in full working order and ready for immediate use. Gedpoxawcyjfx Ag Njkc Available now and can be tested in Boxtel, Netherlands.

Condition: used, Year of construction: 1978, machine/vehicle number: 5042, Press capacity: 25 ton Ram stroke adjustable: 13 - 38 mm Slide adjustment: 51 mm Shut height (stroke down, adjustment up): 230 - 281 mm Max. die size: 430 x 360 mm Number of strokes: 100 - 1.500 s.p.m. Table surface area : 530 x 530 mm Required power: 18 kW Dimensions L x W x H: 2.075 x 1.355 x 2.620 mm Weight of machine approx.: 4,5 ton feeding speed: sheet width: 200 mm Extended machine accessories Press force measurement and tool locking Siegfried Gkedpfx Aeuqdxveg Noc Automation incl. Bruderer BBV 202 feeder

Condition: used, Year of construction: 1982, pressure 30 t stroke 8 - 40 mm no. of strokes 100 - 600 /min distance between columns 330 mm dayligth (stroke and adjustment up) 280 mm column travel -side 300 mm table surface area 540 x 470 mm hole in the table 315 x 110 mm Gkedpfx Agjvuk Hro Nsc table height over floor 1000 mm ram surface 250 mm material width 120 mm material thickness - 3,0 mm feed length - 60 mm power requirement 5,5 kW Weight 2,6 t dimensions of the machine ca. 1,5 x 1,2 x 2,2 mxmxm permitted for automatic mode according to the German Safety Regulations (UVV) with infinitely variable drive, pneumatic clutch, manual stroke adjustment, manuel ram adjustment, fix table, mechanical roll feed (Bruderer BBV 120/60) table surface 540 x 300 mm or 330 x 390 mm as is where is, WITHOUT putting into operation

Condition: ready for operation (used), Year of construction: 1988, operating hours: 7,950 h, functionality: fully functional, BRUDERER BSTA 25 Precision high speed punching press. Gkodpfev Rrctex Ag Nec Nominal capacity: 250 kN; 25 tons. Year of manufacture: 1988 Working hours: 7954 Min./Max. number of strokes: 100/940. Max width of strip: 120 mm. Adjustable stroke: 8, 12, 15, 21, 27, 33 mm. Fitted with roll feeder BBV 190/85 on left hand side. Feed length variable up to 85 mm max. Optional: Sound insulating cabin. Condition: very good working and visual order. Oil pump. Oil cooler. Execution: 4 supports. Front and rear safety guards. Fitted on rubber feet. Table dimensions: 530 x 530 mm. Passage between the supports: Longitudinal 540 mm; Lateral 200 mm. Slide/Ram adjustment 51 mm. Documentation in German or English language included. Press weight cca. 4800 kg. Press dimensions: 2055 x 1355 x H2650 mm. Also on stock high speed presses: Mabu, Schaal, Bihler, Kohler, Soprem and other Bruderer models.

Condition: used, Year of construction: 1985, pressure 25 t no. of strokes 1500 Hub/min Gjdpfx Agjvu E I Do Njkc total power requirement 20 kW

Year of construction: 1993, condition: used, machine/vehicle number: P 285, pression: 800 kN table size: 600 x 900 mm space needed: 1150 x 1900 x 2700 mm weight: 6000 kg Gkjdj N D Anopfx Ag Njc

Condition: good (used), Year of construction: 1983, functionality: fully functional, machine/vehicle number: 6603, Bruderer BSTA 25 (1983) – For Sale Well-maintained Bruderer BSTA 25 from 1985 in good condition. The machine is fully operational and ready for immediate use. Godexawcgopfx Ag Nekc Available now and can be tested in Boxtel, Netherlands.

Condition: used, Press capacity: 50 ton Ram stroke adjustable: 16 - 51 mm Slide adjustment: 78 mm Shut height (stroke down, adjustment up): 300 mm Table surface area : 930 x 590 mm Number of strokes: 620 - 1.120 s.p.m. Required power: 40 kW Dimensions L x W x H: 3.900 x 1.400 x 3.065 Gjdpfx Agow Hg S Ts Njkc Weight of machine approx.: 9 ton

Condition: used, Year of construction: 1988, functionality: unexamined, Bruderer BSTA 50 H with 2xBBV 202/120 Godpfxouwl Iao Ag Nskc no CE Contact us!

Condition: good (used), . Technical data . Pressing force 30 t Stroke 100 - 600 mm Ram stroke, adjustable 8 - 40 mm Gjdsxa Ef Aopfx Ag Nekc Installation height 200 mm . Various reels in stock up to 300 kg . . Ongoing purchase of used German machines without NV or CNC control

Condition: used, Year of construction: 1980, pressure 25 t no. of strokes 1500 Hub/min Gksdpfevu E Iqox Ag Nec total power requirement 20 kW

Condition: used, material width 200 mm Gkodsvuuntopfx Ag Nec material thickness - 6,0 mm feed length 0 - 120 mm Weight 0,40 t required space 0,9 x 0,8 x 0,7 m mechanical roll feed drive via main shaft / pivot shaft of the press - pivot shaft / mounting plate not included max. no. of strokes approx. 1500 / min as is where is, WITHOUT putting into operation, in given condition

Condition: good (used), Year of construction: 1985, Bruderer BSTA 25 (1985) – For Sale Gkjdpfx Asxamv Asg Nec Well-maintained Bruderer BSTA 25 from 1985 in good condition. The machine is in full working order and ready for immediate use. Available now and can be tested in Boxtel, Netherlands.

Condition: used, Year of construction: 1998, machine/vehicle number: 10870, Press capacity: 50 ton Ram stroke adjustable: 16 - 51 mm Slide adjustment: 64 mm Free frontal opening L-R: 1100 mm Free lateral opening F-B: 250 mm Table surface area : 1080 x 650 mm Slide area: 980 x 420 mm Hole in table: 1060 x 200 mm Number of strokes: 100 - 750 s.p.m. Required power: 22 kW Working hours machine: 16850 h Height over floor approx.: 2471 x 1278 x 3150 mm Weight of machine approx.: 9 ton Standard configuration BRUDERER precision roller feed BBV 205 / 120 Gkedpfx Ajuqd Absg Njc

Condition: used, Hydr. differential stroke press, toggle lever hydraulic press, automatic punching press BRUDERER - LEINHAAS type AR 11-100.H Fine blanking press, knuckle-joint press Machine. No. P247 Year of construction 1991 Pressing force 100 ton (1000 kN) Installation height max. 380 mm Table surface 1100 x 700 mm Outlet hole 800 x 220 mm ram surface 690 x 315 mm Frame width 1150 mm Lateral upright width 410 mm Stroke rate 45 and 80 strokes/min. Clamping pin bore Ø 50 mm Compressed air requirement 8-10 bar Hydraulic tank capacity approx. 700 liters Motor power main drive 22 kW Mains connection 400 Volt, 50 Hz, 28 kW - 2 speed settings for the number of strokes (45 and 80 strokes/min.) - electronic cam controller BALLUFF, type Minicontroller BMC4K - electronic tool monitoring EBERLE, type PLS 509S - KISTLER press force monitoring system - table surface with 22 mm T-slots and ram surface with 14 mm T-slots - Electronic stroke counter - motorized height adjustment for the ram - central oil lubrication - Work area shielding through pneumatic opening protective screen - adjacent control cabinet and electrical cabinet - 2 oil coolers with FLUTEC cooling fan (oil-air cooling) - Electrical circuit diagram and printout of PLC program available - Two-hand operation on the machine Gsdpfsgp T Euox Ag Nekc Space requirement (control cabinet) L x W x H 700 x 700 x 2100 mm ( approx. Space requirement (electrical cabinet) L x W x H 1700 x 650 x 2100 mm Space requirement (press) L x W x H 2350 x 1700 x 3300 mm Weight of the press 8500 kg Very good condition

Condition: refurbished (used), pressing force: 60 t, Machine for order High speed press BSTA 60 Retrofit and general overhaul Conversion to electronic drive und new Unidor PC-control system. Tool area enlargement possible. Please contact us for detailed offers. Gedpfx Ajxb D Daog Nskc

Condition: refurbished (used), functionality: fully functional, Mechanical roller feed BBV190/85 for attachment to BSTA50 Left-hand attachment Drive via main shaft / cardan shaft of the press - cardan shaft / mounting plate is not included in the scope of delivery Mechanical feed length adjustment via spindle PTO shaft protection system tube Including encoder attachment Gjdpfx Ajr Hmprog Nokc

Condition: used, Year of construction: 2004, pressure 80 t stroke 16 - 63 mm no. of strokes 100 - 750 /min distance between columns 970 mm dayligth (stroke and adjustment up) 380 mm column travel -side 380 mm table surface area 940 x 910 mm Godpfx Agjvuua Ns Nokc hole in the table 770 x 190 mm table height over floor 1180 mm ram surface 940 x 510 mm ram adjustment 76 mm material width 203 mm material thickness - 6,0 mm feed length 0 - 120 mm power requirement 37,0 kW Weight 14,50 t dimensions of the machine ca. 2,7 x 1,7 x 3,6 m permitted for automatic mode according to the CE-Norm with infinitely variable drive, pneumatic clutch/brake combination, semi-automatic stroke adjustment, motoric ram adjustment, fix table, circular oil lubrication mechanical roll feed Bruderer BBV 205/120 with drive via main shaft / pivot shaft of the press consoles Guethle CK A noise enclosure can be offered optionally - price on request

Year of construction: 1992, condition: ready for operation (used), A Bruderer differential stroke press (knuckle-joint press) is available. Press force: 3200kN, installation height min./max.: 420mm/520mm, clamping table dimensions X/Y/Z: 1400mm/1000mm/150mm, table height: 1030mm, ram dimensions X/Y: 1000mm/800mm, belt passage width and height: 400mm/450mm, machine dimensions X/Y/Z: approx. 2350mm/1850mm/4550mm. Documentation available. On-site inspection is possible. Gjdpfx Ajvdu Nvog Nskc

Condition: used, Year of construction: 1979, machine/vehicle number: 5136, Press capacity: 30 ton Ram stroke adjustable: 16 - 40 mm Slide adjustment: 40 mm Shut height (stroke down, adjustment up): 230 +/- 20 mm Free lateral opening F-B: 170 mm Table surface area : 480 x 450 mm Slide area: 250 mm Number of strokes: 100 - 600 s.p.m. Required power: 5,5 kW Dimensions L x W x H: 2.150 x 1.200 x 1.160 mm Weight of machine approx.: 2,5 ton Standard configuration Roll feederfeeding length 20 - 100 mm Extended machine accessories Automation Roll feeder, type BBV 120/60 Gsdpsuqd Rrofx Ag Njkc

Condition: used, Year of construction: 1999, pressing force: 50 t, stroke length: 51 mm, Bruderer BSTA 50USL - Tool loading area 1100mm L-R - Machine under refurbishment, with new controls - Roll feed BBV or optionally servo feeder available Gkedpfx Agjwu Rraj Nsc Stock image. Please contact us for a detailed quotation!

Year of construction: 1993, condition: ready for operation (used), Pressing force: 2000kN, max. installation height: 550mm, total power requirement: 72kW, operating pressure: 210bar. Including feed unit. On-site inspection is possible. Gsdpev Tnytjfx Ag Nskc

Condition: used, Year of construction: 1989, machine/vehicle number: 4588/23, Press capacity: 60 ton Ram stroke adjustable: 20 - 76 mm Slide adjustment: 80 mm Gsdoxch D Topfx Ag Njkc Free frontal opening L-R: 650 mm Free lateral opening F-B: 260 mm Table surface area : 770 x 620 mm Slide area: 700 x 456 mm Hole in table: 600 x 250 mm Bruderer Double Roll Precision Feed: BBV 202/120 Number of strokes: 70 -700 s.p.m. Dimensions L x W x H: 2.600 x 2.100 x 2.220 mm Weight of machine approx.: 7,5 ton Standard configuration clutch is overhauled Automation Bruderer feeder BBV 202/120

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, Bruderer roll feed, BBV 202/120, left-hand side, suitable for installation on BSTA 25/250 or BSTA 50/500 presses Feed length 0-120 mm Roller width 120 mm Strip inlet width max. 203 mm Strip thickness max. 6 mm Feed length adjustment motorized. Fully overhauled in 2025. Available for immediate delivery. Gksdpfxow S Hv Ij Ag Noc Also in stock are other feeder models, such as BBV 190/85, BBV 195/85, BBV 205/120, BBV 320/200 etc. Please contact us for more information!

Condition: used, Year of construction: 1991, functionality: unexamined, pressing force: 20 t, stroke length: 51 mm, overall weight: 3,600 kg, BSTA 200E press, year of mfg. 1991, in 2000 overhauled, with BBV 101/75 roll feed on right-hand side Adj. stroke 8 to 51 mm Gkedpfsw S Hagex Ag Noc Nominal capacity 20 tons Max. tool loading width 420 mm Available immediately ex-stock. Please contact us for more information!