Used Frame Hydraulic Press for sale (41,603)

Year of construction: 2003, condition: used, frame hydraulic press WEGOMA Workspace: width 3600 mm height 2500 mm the amount of lateral hydraulic cylinders 3 pieces top two pieces beam mechanically Move Nsdecmat Ujpfx Ah Esdc Mechanical compression setting more photos an questions

Year of construction: 2001, condition: used, Max. pressure: 500t, max. operational temperature: 370°C, oil heated, oil cooled, with a secondary cycle for recirculation of heating output, was overhauled in 2014. Njdpfx Ahsdwf Dbj Eodc

Condition: used, Single-column hydraulic press SCHULZ Type SES 250 . 04.86.3511/3 Year of manufacture: 1986 Pressing force: 25 tons Ndedpfx Ahohl Npqe Esc Return force: 10 tons Throat depth: 360 mm Table size: 600 x 720 mm Ram area: 500 x 500 mm Clear hole in table: Ø 100 mm Clamping pin bore: Ø 40 mm Ram stroke: 400 mm Maximum installation height: 600 mm Table height above floor: 935 / 775 mm Hydraulic tank capacity: 380 liters Drive power: 7.5 kW Power connection: 380 Volt, 50 Hz - Adjustable fixed stop in the press cylinder 180 mm, with hand crank adjustment - SICK light barrier - Two-hand operation - Base made of 160 mm U-steel Space requirement (L x W x H): 1900 x 1300 x 3100 / 3260 mm Weight: 3.6 tons Good condition

Condition: used, Year of construction: 2003, Working height: 2300 mm, Working width: 3500 mm, Motor: 1.5 kW, 3 pressure cylinders from above, 2 from the side, Pressure per cylinder: 3000 kg, Cylinder stroke: up to 200 mm, Hydraulics: 10-150 bar, Space required: 3950 x 900 x 2550 mm, Weight: 670 kg Storage location: Nattheim Ndjdpfx Ajvvkmbeh Eoc

Condition: used, Press capacity: 50 ton Throat depth: 265 mm Stroke: 250 mm Daylight: 400 mm Ndjdpfx Aewyplcoh Esc Table surface area : 700 x 450 mm Slide area: 550 x 300 mm Table height over floor: 850 mm Approach speed: 32 mm / sec Working speed: 6,3 mm / sec Return speed: 42 mm / sec Required power: 4 kW Dimensions L x W x H: 1290 x 1160 x 2085 mm Weight of machine approx.: 1,75 ton

Condition: excellent (used), Year of construction: 1984, functionality: fully functional, Hydraulic frame press The machine is complete and fully operational Working range 3000 x 2000 mm Nedpfx Aexmr Spoh Esdc

Year of construction: 2012, condition: used, Hounsell down stroke Hydraulic forming press H frame Year 2012 200ton Daylight 750mm Nominal Table size W x L 2100mm x 1200mm Max Weight top tool 800kg Max system Pressure 340 bar Ram diameters 110mm Number of Rams 6 Seal Dimensions 110 x 130 x 16 Machine construction fabricated frame Machine weight 95000 kg approx Ndedef A R Uhepfx Ah Eoc Approach speed 150mm/s Pressing speed 8mm/s Return speed 80-90mm/s Can quote for new hydraulic presses c and h frame

Year of construction: 1996, condition: ready for operation (used), Pressing force: 1500kN, max. sheet thickness: 2.5mm (at 450N/mm²), max. tool dimensions X/Y: 350mm/650mm, max. tool weight: 270kg, working speed: 13mm/s, ram stroke: 500mm, weight: approx. 10800kg. Ndedpetxbzxefx Ah Ejc

Condition: used, Single-column hydraulic press, straightening press, punching frame ECKOLD Press frame with hydraulic cylinder, mobile press, punching unit Type RSD 1500 - 125 Machine. No. 317 / 690 Year of construction approx. 1986 Compressive force 150 ton. throat 125 mm ram stroke 35 mm Table size 280 x 210 mm Plunger surface Ø 125 mm Installation height (ram to table) max. 265 mm Table height above floor 403 mm Hydraulic operating pressure max. 500 bar - without hydraulic unit - Plunger surface with 4 M16 threads and 20 mm guide groove, central centering hole Ø 15 mm - 1 high-pressure hydraulic hose with external thread M30x1.5 mm, hose length 4 meters - 1 high-pressure hydraulic hose with union nut M30x1.5 mm, hose length 4 meters Space requirement L x W x H 700 x 300 x 1450 mm Ndedpfx Ahed Swtas Eoc Weight 1250 kg Good condition

Condition: excellent (used), Year of construction: 1990, Force 25tons Throat 160mm Daylight 500mm Table size 650x650mm Ram size round 140mm Ndsdofcw Apspfx Ah Ejc Stroke 130mm requested power 4 KW Weight 2000Kg height 2100mm width 1100mm depth 1500mm

Condition: used, Year of construction: 1991, machine/vehicle number: 041-024/39, Press capacity: 63 ton Throat depth: 360 mm Stroke: 500 mm Daylight: 800 mm Table surface area : 750 x 560 mm Slide area: 630 x 400 Nedpfx Ahovai R Ts Eodc Working speed: 60 mm / sec Return speed: 380 mm / sec Electrical connected load: 12,6 kW Dimensions L x W x H: 1.200 x 1.950 x 2.800 mm Weight of machine approx.: 4,3 ton

Condition: excellent (used), Year of construction: 1985, functionality: fully functional, The machine is fully operational and in good condition. Ndedpfexmr Rxex Ah Ejc Working dimensions: 3200 x 2200 mm Dimension adjustment is electrically controlled from the control panel. Powered by a hydraulic unit.

Year of construction: 1992, condition: excellent (used), Used 700ton H-frame hydraulic press for sale Make: Muller Capacity (ton) : 700 Number of pistons : 2 Table dimensions ( x-y/mm) : 4000×2200 Slide dimensions ( x-y/mm) : 4000×2200 Stroke ( mm) : 1400 Light at tdc ( mm) : 1920 Cushion power ( ton ) : 400 Cushion stroke (mm) : 500 Ndjdpfxehcfzks Ah Esc

Condition: used, Year of construction: 1982, pressure 40 t distance between columns 695 bzw. 215 mm stroke 100 mm table surface area 650 x 440 mm ram surface 580 x 285 mm dayligth 400 mm total power requirement 15 kW weight of the machine ca. t dimensions of machine L x W x H 1,63 x 1,05 x 2,61 m - with die cushion - with light bareer make SICK Nsdetqqq Rjpfx Ah Ejdc

Condition: used, Hydraulic punch, punch frame for use with JOKA punching units type HP-S Hydraulic hole punch, hydraulic press for punching brackets Year of manufacture: approx. 1995 Pressing force: 5 tons Throat depth: 155 mm Stroke: approx. 20 mm Punching unit width: max. 54 mm Punching unit installation height: max. 220 mm Die holder: Ø 48 mm Ndedpfjltrmusx Ah Eec Motor output: 1.5 kW Power supply: 230 Volt, 50 Hz - Suitable for universal use with JOKA SW 20 or SWD 20 punching units - Throat depth of punching units can be larger, can be pushed through to the rear - Stroke release via electric two-hand control - Hydraulic power pack HAWE, type HCW 4 / 2.5-B 1/400-1 - On subframe, mobile Required space (L x W x H): 1100 x 800 x 1450 mm Weight: approx. 200 kg Good condition

Condition: good (used), Year of construction: 2002, functionality: fully functional, total height: 3,600 mm, table height: 850 mm, installation height: 500 mm, total width: 1,200 mm, total length: 1,500 mm, throat depth: 250 mm, pressing force: 50 t, table width: 800 mm, table length: 500 mm, overall weight: 4,400 kg, Hydraulic C-frame press, capacity 50 to, table size 800x500 mm, stroke 500 mm, motor 22 kw, dimension 1200x1500x3600 mm, weight ca. 4500 kgs; 2-hand-operation, light-barrier-security Ndodpfx Ahet Ri A Ts Eec

Condition: good (used), Year of construction: 2007, frame press GOMA PHA 3500 Door Press hydraulic Location Gorzów Wlkp. Conditions of delivery OWN RECEIVING Cost of delivery to be negotiated Startup type to be negotiated Description Comments Ndjdpfjdntc Nex Ah Eec Working space 3500 x 2300 mm 1000kG (daN) pressure, engine at hydraulic unit 2,2 kW lenght 3500 mm hight 2300 mm weight 2000 kg agrageate hydraulic

Condition: new, 4 glueing poles, 1 pressing bar, hydraulic, Nsdpfx Ahsvrv H Se Esdc external sizes L x H 3000 x 2000 mm, ca. 200 kg

Year of construction: 1990, condition: good (used), Used Bemco 300ton C frame hydraulic press for sale Bed size 1200 x 900 Daylight 1150 Stroke 700 Cylinder dia 300 Ndodjg S Uc Djpfx Ah Ejc New c frame presses available for sale 30ton 60ton 100ton 150ton 200ton 250ton and 300ton

Condition: new, Year of construction: 2025, operating hours: 818 h, functionality: fully functional, 400 TONS MOTOR OPERATED WORKSHOP HYDRAULIC PRESS SPEC; Tonnages : 407 Tons at 400 bars Cylinder Calibre : 360 mm, Rot Calibre:250 mm, Stroke:400 mm Motor : 15 KW 20 HP 1500 Revolutions per Minute 380 Volt Pump : 45 cc 67,5 liters 400 bar variable flow rate with power regulation(Taiwan) Lever Hand : 1 P 120 Liters Hydropax ( Import ,Erapa) Front Distance of Press : 1420 mm Side Distance of Press : 560 mm Daylight : 900 mm Stroke : 400 mm ( Safe ) Movable Cylinder : to right and left Nodpfx Ahsxnm Une Esdc Chrome plated and hardened cylinder Emergency Button Motor : 2.2 KW 3 HP 1500 Revolutions per Minute 380 Volt Pump :4 cc 6 liters gear pump Hand Lever : 1/2 ‘’ Hydropax Advance Speed :11.05 mm/sec. Return Speed : 21,35 mm/sec. Oil Tank of Press :1200x1000x600 mm 575 liter Press Frame : ST 44 or ST 52 and Steel Welded Weight of Press : 5500 kg (+/- About)

Condition: used, Single-column hydraulic press HYDRAP type HPSK 25 No. 6312 Year of construction 1989 Pressure force 25 ton. Ram stroke 500 mm throat depth 300 mm Installation height 700 mm Table surface 1000 x 500 mm Table bore Ø 210 mm Plunger surface 400 x 360 mm Clamping pin bore Ø 40 mm Table height above floor 855 mm Feed speed in rapid traverse 280 mm/sec. Pressing speed 3.5 mm/sec. to 25 mm/sec. Return speed 280 mm/sec. Hydraulic tank capacity 240 liters Drive power 7.5 kW Mains connection 400 Volt, 50 Hz. - Operation and programming via SIEMENS S5 with OP1 control system - Measuring system for stroke adjustment - Pressing speed infinitely variable via potentiometer - Pressure setting infinitely adjustable manually via pressure regulator - Short stroke device - Mechanical tool clamping on ram with T-slots and clamping pin hole - Switch cabinet with electrical control on the machine - Two-hand operation and electrical connection for foot control - Control provided for electrical mold monitoring - Hydraulic diagram and electrical diagram available Ndedpfxehrakvj Ah Ejc Space requirement L x W x H 1800 x 1200 x 2930 mm Weight approx. 4 tons good condition

Condition: new, Year of construction: 2025, functionality: fully functional, feed length X-axis: 2,000 mm, feed length Y-axis: 3,000 mm, feed length Z-axis: 180 mm, total width: 2,300 mm, total length: 4,120 mm, total height: 2,650 mm, working height: 180 mm, working width: 2,000 mm, pressure plate depth: 120 mm, pressing force: 2 t, overall weight: 2,000 kg, stroke length: 100 mm, warranty duration: 12 months, input voltage: 400 V, input frequency: 50 Hz, height adjustment type: mechanical, power: 3 kW (4.08 HP), Double Hydraulic Frame Press – Industrial Solution for Precise and Efficient Assembly Designed for demanding production environments, this double hydraulic frame press delivers high levels of adaptability and structural integrity, making it ideal for assembling wooden frames – from windows and doors to custom furniture components of various shapes and sizes. Maximum Flexibility for a Wide Range of Applications Thanks to its intelligent engineering and adjustable clamping systems, the press quickly adapts to frames of different thicknesses and geometries without requiring complex setups or manual intervention. Changeovers between workpieces are fast and effortless, significantly increasing production efficiency. Industrial-Grade Construction for Heavy-Duty Use The press frame is built from high-quality structural steel, engineered for enhanced rigidity and operational stability under heavy loads. The side beams are machined from a single solid piece, eliminating potential weak points caused by joints or welds. Strategically placed reinforcements minimize torsional deformation during pressing, ensuring the precise alignment and perpendicularity of all frame components. This robust design not only enhances operational safety but also extends the lifespan of the equipment, even under continuous industrial use. Ndodpfswgybuox Ah Ejc Efficient Hydraulic Pressing with Accurate Force Control The system integrates 10 high-efficiency hydraulic cylinders (6 vertical, 4 horizontal) that apply uniform and controlled pressure across the entire surface of the frame. This ensures consistent joint compression and even adhesive distribution, eliminating gaps or weak spots. Additionally, three frontal pressing systems guarantee correct contact between the workpiece and the pressing tables, optimizing positioning prior to clamping. Modular pressing pistons with quick-lock mechanisms can be easily repositioned to suit the size and shape of the frame, enabling targeted pressure exactly where needed. This is especially beneficial for complex geometries or structurally sensitive zones. Simplified Operation via Fully Automated Hydraulic System Equipped with a high-capacity hydraulic pump, the press operates autonomously without requiring external pressure sources. Pressing functions and pressure adjustments are activated via intuitive electric controls, eliminating physical strain on the operator. Each work zone is equipped with an independent foot pedal, allowing localized operation for increased flexibility. The hydraulic pump is designed to maintain stable and consistent pressure throughout the pressing cycle, ensuring uniform results from start to finish. Engineered for High-Performance Industrial Production This double frame press excels through: large-scale processing capacity, adaptability to various frame types and materials, efficient and reliable operation. It is the perfect solution for companies operating in heavy-duty production environments, providing a genuine competitive edge in assembly operations, both in terms of speed and precision. Technical support available in english - romanian - german.

Condition: new, Year of construction: 2025, H-FRAME DOUBLE-ACTING HYDRAULIC PRESS MODEL HDD 400 / 400 TON Ram Cylinder Capacity (ton): 400 ton Min. Working Pressure (bar): 30 bar Max. Working Pressure (bar): 250 bar Main Cylinder Diameter: Ø 420 mm * 1 pc Auxiliary Cylinder Diameter: Ø100*60 mm * 2 pcs Table Size (mm): 1500 x 1200 mm Stroke (mm): 1000 mm Daylight (mm): 1400 mm Advance Speed (mm/sec): 1400 mm/sec Nodpfx Ahewbtn Rj Ejdc Return Speed (mm/sec): 200 mm/sec Working Speed (mm/sec): 2–12 mm/sec Cushion Capacity (ton): 200 ton Cushion Stroke (mm): 400 mm Ejector Force (ton): 10 ton Ejector Stroke (mm): 300 mm Motor (kW): 37 kW Pump (cc): 100 cc Overall Dimensions (LxWxH): 2550 x 3500 x 6100 mm Weight (kg): Approx. 26,000 kg

Condition: used, Single column hydraulic press DUNKES type HZT 2,5 Machine No. H94-2558 Year of construction 1994 pressure force 2,5 ton. throat 180 mm table area 420 x 300 mm drop-through opening in table 60 x 185 mm ram surface Ø 40 mm clamping spigot bore Ø 20 mm ram stroke 160 mm Installation height max. 250 mm Rapid traverse downward 65 mm/sec. Rapid traverse upwards 160 mm/sec. Working speed 8,3 mm/sec. Table height above floor 950 mm Ndedpfx Ash Uhqyeh Esc Hydraulic operating pressure 135 bar Tank capacity hydraulics approx. 100 liters Drive power 1,5 kW Mains connection 400 Volt, 50 Hz - Installation height can be increased by shortening the piston rod by 80 mm - Pressure and travel cut-off - 2-hand operation at the machine - stroke counter - safe press control with 2 monitored hydraulic valves - UVV 11.064 VGB 7.n.5.2 (for manual insertion work) - 32047 read off operating hours - Electrical circuit diagram and hydraulic diagram available space requirement L x W x H 1100 x 980 x 1950 mm weight 700 kg very good condition

Condition: used, Single-column hydraulic press SCHÖN type TES/C Year of manufacture 1977 Pressing force 63 tons (160 bar) Thrust 320 mm Table size 600 x 770 mm Ram surface 600 x 400 mm Ram stroke 125 mm Max. installation height 400 mm (with intermediate plate on the ram) Ndodpfx Ahjv Tp D Tj Esc Rapid downward traverse speed approx. 180 mm/sec. Rapid working speed approx. 25 mm/sec. Rapid upward traverse speed approx. 180 mm/sec. Table height above floor: 870 mm Drive power: 22 kW Power supply: 380 volts, 50 Hz Tank capacity: approx. 280 liters of hydraulic oil - Adjustable fixed stop - Electric two-hand operation - Intermediate plate on the ram: L x W x H 500 x 500 x 50 mm Space requirement: L x W x H 2400 x 1100 x 2750 mm Weight: 4 tons Good condition