Used hydraulic presses double column / four column presses for sale (235)

Condition: used, Bending capacity: Ø45 mm Bending angle: 0 - 180° Kdsdpfx Aqsq Nipyeqjr Revolver-adjustment: 8-fold adjustable angles Mandrellength: 4000 mm Sets of bendingdies: 1x Ø 16 mm 2x Ø 17 mm 3x Ø 20 mm 2x Ø 27 mm 1x Ø 28 mm 2x Ø 30 mm Featured with: - 4 Mandrels - Mandrel retraction unit Country of origin: Germany Motor power: 3 kW Machine LxWxH: 400 x 100 x 120 cm Machine weight: 1500 kg

Condition: good (used), Year of construction: 1978, Hydraulic press, two-column press, oil hydraulic press, hydraulic press, high-speed press, high-speed hydraulic press -Manufacturer: Hans Schoen, Hydraulic press type SH 100 -Pressing force: 100 tons -Motor: 11 kW -Clamping table: 580 x 440 mm / Bore Ø 150 mm -Max. insertion height: 435 mm -Projection: 650 mm -Max. stroke: 150 mm -Hole: Ø 50 mm -Documents: Operating instructions/circuit diagram -Dimensions: 1640/1300/H2650 mm -Weight: 4440 kg Kdedsyzd I Uepfx Aqqjr

Condition: used, pressure 1000 t table length 2110 mm table width 1755 mm stroke 500 mm 18 min work height max. 380 mm 4 Punkt weight of the machine ca. 107,25 t dimensions of the machine ca. / m WILKINS & MITCHELL Trimming press with accessories Pressure force: 1000 t With discharge table and gear component Table area 2110 x 1755 mm Kdjdpsgrnaqjfx Aqqsr Weights Stand: 47.1 T Table: 8.84 T Fumrungen: 1.72 T Drive: 26.47 T Compensating cylinder: 1.65 T Motor mount and guard: 2.04 T Pusher: 11.53 T Adjusting screws and bolts: 2.66 T Slide setting: 0.85 T Miscellaneous: 1.02 T Hydraulic ejector: 0.52 T Total weight: 107.25 tons

Condition: like new (used), Year of construction: 2023, functionality: fully functional, PLEASE READ CAREFULLY!!! THIS OFFER IS EXCLUSIVELY FOR EUROPEAN END CUSTOMERS, AND THE FIRST INQUIRY MUST INCLUDE COMPLETE CONTACT INFORMATION. THANK YOU. Kjdpfx Aqozvnpieqedr The forging line consists of a hydraulic 1500-ton forging press, an induction unit with 1200 kW, and a robot with a load capacity of 300 kg. So far, prototypes have been manufactured; however, the line was actually designed for series production, which has not yet taken place. The line was built and installed in 2023. The technical specifications are as follows: Hydraulic press 1500 tons (year of manufacture 2023) SIEMENS control system - Pressing force: 1500 tons - Retraction force: 120 tons - Downward stroke: 300 mm/s - Pressing stroke: 100 mm/s - Upward stroke: 300 mm/s - Installation height: 3,000 mm - Ram stroke: 1,500 mm (!) - Ram size: 1,600 x 1,600 mm - Table size: 1,600 x 1,600 mm - Ejection force / 1 position: 40 tons - Stroke: 600 mm - Ejection speed: 250 mm/s - Return speed: 250 mm/s - Stroke: 400 + 400 mm - Traverse speed: 200 mm/s - Ram positions: 3 positions Including a 1200 kW induction unit (year of manufacture 2023) MITSUBISHI control system - 1200 kW / 450 Hz induction unit for billets - Coil size: Ø 215 / Ø 150 mm, two sets of coils - Material feeding system Including a Kawasaki robot (6 axes) – Model: ZX300S-D- (year of manufacture 2023) - Max. load capacity: 300 kg - Max. reach: 2500 mm Sample images of the machines are attached.

Condition: ready for operation (used), Year of construction: 1987, functionality: fully functional, pressing force: 200 t, Hans Schoen NH/LF 200 (UVV) – Powerful & Robust 🔧 Model: Hans Schoen NH/LF 200 📍 Type: Hydraulic Double-Column Press (UVV-certified) 📅 Year of manufacture: approx. 1988 (depending on the specific machine) 📦 Condition: used, fully functional ⸻ 💪 Technical Highlights • Pressing force: approx. 200 t – suitable for demanding forming and drawing applications • Hydraulic drive for precise force and stroke control • Column clearance: approx. 1,050 mm – generous working area • Stroke: approx. 150 mm – efficient travel distance • Table size: approx. 1,000 × 1,200 mm – large clamping area • Table height above floor: approx. 850 mm – ergonomic working height • Hydraulic control (often with PLC/Siemens control) possible • Safety and UVV certification for manual loading – increased operational safety 💡 Thanks to its robust construction, this press is ideally suited for series production, drawing and forming processes as well as machining and assembly tasks in metalworking operations. ⸻ 📌 Features & Equipment • Two-hand operation / safety control • Adjustable mechanical stop • Pressure cut-off • Pressure switch • UVV-compliant safety features → all for efficient and safe operation on the shop floor Currently UVV-certified. ⸻ Kdjdpfx Asx Ry Nyjqqer 🛠️ Applications This press offers versatile usage, such as for: • Metal forming / drawing work • Assembly and joining part production • Testing and quality control processes • Series and small batch production ⸻ 📦 Size & Weight • Dimensions (approx.): Width × Depth × Height ≈ 4.0 × 3.6 × 3.4 m • Weight: approx. 16 t – robust industrial construction

Condition: good (used), Year of construction: 1982, Press force: max. 200 kN Safety distance: 100mm Post-travel: max. 10 mm Motor power: 3 kW Kedpfezvfp Hsx Aqqedr

Condition: used, Year of construction: 2005, Pressure 800 t distance between columns 2560 mm stroke 1050 mm Kdjdpfx Aezrpt Ieqqer Distance table/ram, stroke up 1870 mm Table surface area 2500 x 1730 mm pressure of drawing cushion in table 300 t Die cushion stroke in table 395 mm Die cushion area in table 2300 x 1300 mm Ram surface 2500 x 1730 mm Die cushion pressure in ram 63 t Die cushion stroke in ram 150 mm Side window 1000 mm Oil volume 4300 l Power capacity 200,0 kW Dimensions (WxDxH) 4,1 x 2,8 x 10,0 m Height above floor 7,0 m year of manufacture 1974 overhaul 2005: formerly type BZE 800, converted to ZE 800 by manufacturer with new ram and new cylinder mit ölhydraulischem Antrieb, hydraulischem gesteuertem Ziehkissen im Tisch und Stößel stored in dismantled condition - Video at seller’s site before dismantling available

Condition: used, Year of construction: 2005, Pressure 600 t distance between columns 2600 mm stroke 900 mm Distance table/ram, max. stroke up, adjustment up 1600 mm Table surface area 2500 x 1730 mm pressure of drawing cushion in table 250 t Die cushion stroke in table 400 mm Die cushion area in table 2300 x 1300 mm Die cushion pressure in ram 63 t Die cushion stroke in ram 160 mm Kdodpfx Aezrptzeqqjr Die cushion area in ram 1900 x 1300 mm Ram surface 2500 x 1730 mm Side window 1100 mm Oil volume 3500 l Power capacity 200,0 kW Dimensions (WxDxH) 4,1 x 2,8 x 9,6 m Height above floor 6,4 m year of manufacture 1974 - overhaul 2005: complete new electrical cabinet with control Siemens S7 and safety control Pilz with oil-hydraulic drive, hydraulic controlled drawing cushion in table and ram, hydraulic cutting impact cushioning stored in dismantled condition - Video at seller’s site before dismantling available

Condition: used, Year of construction: 1998, Pressure 800 t distance between columns 3550 mm stroke 1100 mm Distance table/ram, max. stroke up, adjustment up 1900 mm Table surface area 3500 x 1800 mm pressure of drawing cushion in table 350 t Die cushion stroke in table 280 mm Die cushion pressure in ram 80 t Die cushion stroke in ram 160 mm Ram surface 3500 x 1800 mm Kdedpezrptnofx Aqqor Side window 1900 mm Weight 100,0 t Floor Space (WxD) 5,3 x 4,3 m Height above floor 7,3 m Height below floor 5,0 - 6,0 m year of manufacture 1970 - overhaul 1998 with oil-hydraulic drive, hydraulic controllable drawing cushion in table and ram, hydraulic cutting impact cushioning, moving table (without rails for the moving table) Height beneath floor approx. 5 - 6 m stored in dismantled condition - Video at seller’s site before dismantling available

Condition: repair required (used), Year of construction: 1980, functionality: limited functionality, For sale is a Hans Schön hydraulic press with a capacity of 650 kN. It was last used approximately 8 years ago. At that time, the machine had a problem with a hydraulic hose (possibly a broken hydraulic hose or a leaking connection). Ksdpfjx Ehmyex Aqqsdr This was not repaired because the press was no longer needed. Otherwise, the machine operated perfectly until the last use. The press does not have a valid safety inspection certificate.

Condition: used, Year of construction: 1987, pressure 2000 t distance between columns 975 mm stroke 400 mm distance table/ram, max. stroke up, adjustment up 1000 mm table surface area 1015 x 1050 mm Kdsdpfx Aszrpr Roqqjr table height over floor 800 mm capacity of ejector in table 6,3 t ejector stroke in table 100 mm capacity of ejector in ram 65 t ejector stroke in ram 100 mm ram surface 975 x 1050 mm return capacity 150 t speed down 235 mm/s speed up 250 mm/s working speed 5 - 20 mm/s oil volume 4000 l height over floor 3,65 m height beneath floor 3,75 m power requirement 194,0 kW weight 105,0 t dimensions (WxDxH) 5,0 x 6,5 x 7,4 m Calibrating press with oil-hydraulic drive, hydraulic ejector in table and ram

Condition: defective spare-parts repository (used), Year of construction: 1999, machine/vehicle number: REP 01.23, functionality: not functional, pressing force: 1,000 t, table length: 1,000 mm, retraction force: 400 t, Equipment: CE marking, safety light barrier, We are offering this defective REPKON RHHP 100 1000/400 kN hydraulic press with a draw cushion, manufactured in 1999. Manufacturer: REPKON Model: RHHP 100 1000/400 kN Year of manufacture: approx. 1999 Control system defective If you have any questions or require further information, please do not hesitate to contact us. Kjdpfx Aezub Nmoqqjdr

Condition: used, Manufacturer: Hylatechnik Paul Chrubasik GmbH Type: HSSP 300-3-XA4 Machine type: Hydraulic press Year of manufacture: 2000 Condition: used Press force: 3,000 kN Press force: 300 t Stroke: 300 mm Maximum installation height: 800 mm Table area: 2,000 × 1,550 mm Ram area: 2,000 × 1,540 mm Front opening: 2,000 mm Side opening: 1,050 mm Table height: 800 mm Rapid traverse: 340 mm/s Working speed 1: 32.5 mm/s Working speed 2: 19.5 mm/s Retraction: 340 mm/s Maximum working pressure: 280 bar Drive power: 75 kW Power supply: 400 V Frequency: 50 Hz Machine weight: approx. 38,500 kg Hydraulic oil tank: approx. 2,000 l Pulling cushion: no Equipment: Complete DREHER strip system DREHER strip unwinder DREHER strip feeder Kjdszrz D Sspfx Aqqjdr DREHER strip conveyor system Hydraulic die cushion with parallel movement Hydraulic roll blocks Tool changing consoles Siemens SIMATIC control panel Note: The system is currently running at a slow speed but has no significant damage. We will gladly send you videos of the machine in operation upon request.

Condition: good (used), Year of construction: 1990, pressing force: 3,000 t, Bending length: 14,000 mm Column width: 10,500 mm Control: CYBELECCNC 7000 with graphic Table width: 1,000 mm Ksdpfx Aqozva Ahjqedr Distance between table and press beam: 1,800 mm Controlled axes: Y1; Y2; X1; X2 Control system was renewed in 2012 Total power requirement: 75 kW Machine weight approx. min.: 465 t Space requirement approx.: 14,600 x 4,200 x 7,200 mm Additional information - Distance between table and press beam: 1,800 mm

Condition: used, Year of construction: 1977, pressure 250 t distance between columns 1110 mm stroke 250 mm Distance table/ram, max. stroke up, adjustment up 500 mm Table surface area 1100 x 900 mm Table height above floor 950 mm Side window 690 mm Ram surface 1100 x 900 mm Oil volume 730 l Kdedszrpthjpfx Aqqjr Power capacity 56,0 kW Dimensions (WxDxH) 2,3 x 1,55 x 3,96 m with oil-hydraulic drive, controllable dependent on pressure/time and way, cutting impact cushioning, depth stop No foundation pit necessary

Condition: used, Year of construction: 1985, pressure 40 t distance between columns 495 mm stroke 150 mm distance table/ram, max. stroke up, adjustment up 300 mm table surface area 490 x 400 mm hole in the table 50 mm table height over floor 950 mm side window 155 mm ram surface 150 mm speed down 200 mm/s speed up 200 mm/s working speed 20 mm/s Kdodpfxszrptbj Aqqor oil volume 115 l power requirement 5,5 kW weight 2,2 t dimensions (WxDxH) 1,35 x 1,1 x 2,2 m with oil-hydraulic drive, upper and lower stroke limitation, mechanical depth stop, two-hand and foot operation

Condition: used, Year of construction: 1990, pressure 500 t distance between columns 1220 mm stroke 600 mm distance table/ram, max. stroke up, adjustment up 1000 mm table surface area 1600 x 1200 mm pressure of drawing cushion in table 320 t stroke of drawing cushion in table 150 mm drawing cushion surface in table 750 x 625 mm pressure of drawing cushion in ram 180 t stroke of drawing cushion in ram 100 mm drawing cushion area in ram 750 x 625 mm ram surface 1600 x 1200 mm table height over floor 800 mm Kodozrpqtjpfx Aqqjdr speed down 665 mm/s speed up 530 mm/s working speed 34 - 100 mm/s quantity of oil 2000 l power requirement 180,0 kW weight 40,0 t Dimensions (WxDxH) 3,2 x 2,4 x 7,5 m Depth of foundation pit 4,1 m Height above floor 5,55 m YOM 1975 - Overhaul 1990 with oil-hydraulic drive, hydraulic drawing cushion in table and ram

Condition: used, Year of construction: 1993, pressure 315 t distance between columns 1660 mm stroke 400 mm Distance table/ram, stroke up 600 mm Table surface area 1600 x 1000 mm table height over floor 960 mm Die cushion pressure in table 80 t Die cushion stroke in table 200 mm Die cushion area in table 950 x 650 mm Side window 720 mm Ram surface 1600 x 1000 mm Kdodpfxozrptuj Aqqer Oil volume 1400 l Power capacity 57,0 kW Weight 30,0 t Dimensions (WxDxH) 3,0 x 2,9 x 4,4 m with oil-hydraulic drive, hydraulic drawing cushion in table

Condition: used, Year of construction: 2015, machine/vehicle number: 1606.18, functionality: fully functional, pressing force: 163 t, stroke length: 700 mm, table width: 2,000 mm, table length: 1,400 mm, table height: 800 mm, total length: 2,400 mm, total width: 3,200 mm, total height: 5,200 mm, overall weight: 28,000 kg, Equipment: documentation/manual, Hydraulic 4-Column Press – 163 T – 2,000 × 1,400 mm For sale is a hydraulic 4-column press from the manufacturer HYMAG with a maximum pressing force of 163 T. The machine has a table size of 2,000 × 1,400 mm, an open height of 1,300 mm, and a stroke of 700 mm, making it suitable for forming, straightening, pressing, inserting, and assembly operations in industrial applications. ##### Technical Data + Information: Hydraulic 4-Column Press – 163 T – 2,000 × 1,400 mm Kdsdpezq Apgefx Aqqer ==== General Information - Manufacturer: HYMAG - Type: Hydraulic 4-Column Press - Model: HS 4 160-K3 - Machine Number: 1606.18 - Year of Construction: 2015 - Pressing Force: 163 T - Rated Force: 1,600 kN - Table Size (Working Area): 2,000 × 1,400 mm - Ram Plate Size: 2,000 × 1,400 mm - Table Height: 800 mm - Open Height: 1,300 mm - Stroke: 700 mm - Front Clearance: 2,010 mm - Side Clearance: 900 mm - Overall Height: 5,200 mm - Overall Width: 3,200 mm - Overall Depth: 2,400 mm - Total Weight: 28 T - Basement Required: No ==== Hydraulic Cylinder - Max. Working Pressure: 305 bar - Return Speed Downwards: 220 mm/s - Return Speed Upwards: 150 mm/s - Initial Pressing Speed: 45 mm/s ==== Hydraulics & Drive - Main Motor: 55 kW - Additional Hydraulics: 7.5 kW - Auxiliary Motor: 7.5 kW - Cooling Motor: 1.5 kW - Oil Tank: 600 l - Drive Type Pump (Drive I): V30D115RKN - Drive Type Additional Hydraulics (Drive II): PGH3-2X/016 - Cooler Type: TFS/A-20-400 ==== Tooling - T-Slots: M20 according to DIN 650 ==== Control System - Valve Voltage: 24 V ==== Safety - Shear Pad Dampening - Maintenance Platform - Follow-Up Travel: 17 mm - Follow-Up Time: 90 ms - Safety Distance: 180 mm ==== Electrical Connection - Operating Voltage: 400 V - Main Motor Current Draw: 98 A - Auxiliary Motor Voltage: 400 V - Auxiliary Motor Current Draw: 15 A - Cooling Motor Voltage: 400 V - Cooling Motor Current Draw: 4 A ##### Application Areas: Forming, deep drawing, straightening, inserting, embossing, assembly work, toolmaking, mold making, mechanical engineering, metalworking, contract manufacturing, series production (Hydraulic 4-Column Press, 4-Column Press, Hydraulic Press, HYMAG, HYMAG HS 4 160-K3, 163 T Press, 163 Ton Press, Forming Press, Deep Drawing Press, Straightening Press, Inserting Press, Assembly Press, Industrial Press) Are you looking for a hydraulic press tailored to your specific application? Contact us for an individual offer. Our hydraulic presses are manufactured according to German and European Machinery Directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements as they comply with all aspects of the Brazilian national safety directive NR 12, which builds upon these. Our core strength is in the design and construction of custom machinery and press automation. We distribute customized hydraulic presses at surprisingly affordable prices. The hydraulics of the presses predominantly use components from leading European manufacturers.

Condition: good (used), Year of construction: 1981, pressure 300 t passage width 1100 mm Kjdpfxox Uru No Aqqedr stroke 950 mm table width 1050 mm table depth 1200 mm dayligth 1180 mm weight of the machine ca. 20 t dimensions of the machine ca. 2,8 x 3 x 4,5 m

Condition: good (used), pressure 250 t passage width 700 mm stroke 850 mm table surface area 2000 x 1000 mm Kdedjxcblwspfx Aqqjr mould height - Max./min. 355 / 1200 mm total power requirement 30 kW weight of the machine ca. 25 t dimensions of the machine ca. 4,2 x 2,1 x 5,5 m

Condition: new, Year of construction: 2026, functionality: fully functional, pressing force: 25 t, stroke length: 400 mm, reverse speed: 20 mm/s, table width: 1,000 mm, table length: 600 mm, table height: 1,000 mm, For sale is a hydraulic sub-platen press from the manufacturer DURENDUS with a maximum pressing force of 25 tons. The machine has a table size of 1,000 × 600 mm, a maximum installation height of 600 mm, and a stroke of 400 mm, making it suitable for assembly, straightening, pressing, and forming operations in industrial applications. ##### Technical data + information: Sub-platen press – 25 T – 1,000 × 600 mm ==== General information - Reference ID: DE-2026-HB-227-01 - Design: 4-column sub-platen press - Manufacturer: DURENDUS - Pressing force: 25 T (adjustable) - Table size: 1,000 × 600 mm - Maximum installation height: 600 mm - Working height: 1,000 mm - Overall height: approx. 1,850 mm - Overall width: approx. 1,750 mm - Overall depth: approx. 1,200 mm - Total weight: approx. 2,000 kg ==== Hydraulic cylinder - Stroke: 400 mm - Cylinder diameter: Ø 115 mm - Piston rod diameter: Ø 90 mm - Working pressure: 250 bar - Return speed: 20 mm/s - Idling speed: 10 mm/s ==== Hydraulics & drive - Hydraulic pump: 6 l/min - Motor power: 3 kW - Tank volume: 30 l - Pressure accuracy: ±5 bar - Hydraulic block and valves: DUPLOMATIC - Air and oil filter: FILTREC - Pressure gauge for pressure indication - Hydraulic unit: mounted at the bottom of the press - Hydraulic oil: HLP46 (not included) ==== Control - Operation: hand valve - Operating mode: manual - Pressure adjustment: rotary control - Stroke limitation: manual via sensor - Siemens components in the control cabinet ==== Safety - 4-column guidance with Ø 60 mm guides - Safety monitoring - CE-compliant design ==== Electrical connection - Main supply: 400 V AC - Control voltage: 24 V DC - Frequency: 50 Hz - Main motor connection power: 4 kW Kodpfx Ajzp Ex Uoqqedr - Total connection power: approx. 5 kW - Protection class of the control cabinet: IP54 ##### Application areas: pressing, forming, straightening, assembly work, jig and fixture construction, toolmaking, metalworking, mechanical engineering, maintenance, small series production (Sub-platen press, hydraulic sub-platen press, hydraulic press, 25 T press, 25 ton press, 4-column press, column press, assembly press, straightening press, pressing press, forming press, industrial press) Are you looking for a hydraulic press tailored to your specific application? Contact us for an individual offer. Our hydraulic presses are manufactured according to German and European Machinery Directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements, as they comply with all points of the national Brazilian safety directive NR 12, which is based on these. Our strength lies in the design and manufacture of special machines and the automation of presses. We distribute custom-made hydraulic presses at surprisingly affordable prices. Predominantly, components from leading European manufacturers are used for the hydraulics of the presses.

Condition: good (used), Hydraulic press, two-column press, oil hydraulic press -Pulley pressing force: 65 tons -Hydraulic unit: max. 330 bar -Clamping table: 440 x 250 mm -Max. insertion height: 295 mm -Max. width: 300 mm -Max. stroke: 220 mm -with safety cage -Max. feed rate: 3 mm/sec -Retraction speed: 6 mm/sec Kedpfx Aeb I Dqaeqqodr -Dimensions: 1680/500/H2300 mm -Weight: 980 kg

Condition: ready for operation (used), Hydraulic press, single-column high-speed press, C-column press, oil-hydraulic press - Pressing force of the ram: approx. 35 tons -Clamping table: 500 x 470 mm -Insertion height: 650 mm -Insertion width: 275 mm -Dimensions: 1300/900/H3200 mm Kdsdpfjb A Nkbjx Aqqjr -The machine can be dismantled to a height of: 2700 mm -Weight: approx. 1500 kg

Condition: as good as new (ex-display), Year of construction: 2020, pressing force: 20 t, Double column press 20 T capacity, a) Closing speed up to 10 mm/sec b) opening speed up to 30 mm/sec c) table size between columns 1400x1100 mm d) ram size between columns 1400x1100 mm e) Manual lubrication (via grease nipple) f) UKF pump-cooling-filtration ( electrical cooling ) g) Pressure adjustment from 4 T to 20 T ( adjustable via rotary control ) h) Travel adjustable via slide control Type of construction Press design Double column press ,hydraulic Thermally neutral 80 - 120 °C Number of operating sides 1 side Forces Pressing force max. 200 kN Free ripping force max. 20 kN Ksdpehmbhqsfx Aqqjdr Pressure build-up time Closed tool Steel on steel Max. 4 sec. Dimensions Max. Opening width 500 mm Stroke 300 mm Table height above floor, approx. 900 mm Height above floor (headroom) approx. 2800 mm Hall height min. 3,500 mm Parallel deviation at 20°C #ERROR! mm Deflection Determined at max. clamping force with 2/3 occupancy < = 0.4 mm/m Weight Total weight of the press without operating materials approx. 3 to Table cut-out Size 1100x850 mm Speeds Fast closing with 9 mm sec. Pressing speed 9 mm sec. Sound pressure Sound pressure level, measured at 1.5m height at the control panel according to DIN 45635-T16-KL3 max. 78 db(A) Hydraulics Number of press/driving cylinders 2 pcs. Operating pressure max. 280 bar Pressing pressure build-up time 3-5 sec. Pressure accuracy during pressing stroke +/- 5 bar Main pump BOSCHREXROTH/PARKER approx. 35 L/min Oil volume approx. HLP 46 D 150 litres Ambient temperature max. 40 °C Oil temperature max. 55 °C Flow temperature °C Circulation pump for cooling ACS approx. 6.5 L/min Electrical system Main supply 400 V AC Control voltage 24 V Frequency 50 Hz Hydraulic connection Main motor 3 kW Total connection Approx. 5 kW