Used Frame Press Hydraulic for sale (42,194)

Condition: new, Year of construction: 2025, pressure 060 t stroke 350 mm table surface area 750x344 mm dayligth 197/750 mm distance between columns 750 mm Tjdpfx Asxu Nvzjdlof diameter of piston 75 mm

Condition: good (used), Hydraulic press, single-column press, C-column press, oil-hydraulic press, hydraulic single-column press -Handover: in its current condition as inspected -Note: without hydraulic unit and control system -Pressing force: 40 tons -Piston rod: Ø 105 mm -Max. stroke: 710 mm Todpeupbdgofx Adljf -Mounting plate: 550 x 800 x 45 mm -Mounting plate holes: Ø 18 mm -Dimensions: 890/1570/H610 mm -Weight: 826 kg

Condition: good (used), Manufacturer: EXNER Type/Model: EXSB 150 Serial No.: 10473 Year of manufacture: 03/2002 Press force: 1,500 kN Power: 41.81 kW Tool dimensions: 1,400x1,200 mm Tjdpfjxwmdhex Adljf

Condition: excellent (used), functionality: fully functional, table height: 585 mm, die cushion stroke: 280 mm, table width: 2,900 mm, table length: 5,000 mm, installation height: 1,190 mm, pressing force: 2,000 t, die cushion force: 380 t, stroke length: 1,050 mm, The machine on offer is a hydraulic tryout press. This press underwent a comprehensive general overhaul in 2014 by a specialist company in Germany. During the overhaul, the mechanics, electrics, and hydraulics were completely renewed and modernized. Only components from renowned European manufacturers were used for the refurbishment. A particular highlight of this tryout press is that both the ram and the bolster are equipped with draw cushions. The bolster is designed as a movable table. The ram can be stopped and mechanically locked in any position as required. Technical specifications: Table size: 5000 mm x 2900 mm Draw cushion size: 4200 mm x 1800 mm Draw cushion stroke: 280 mm Draw cushion force: 380 t Draw cushion operation: 4-way controlled draw cushion, compensation not required Table height above floor: 585 mm Ram size: 5000 mm x 2900 mm Ram force: 2000 t Ram cushion size: 2400 mm x 1200 mm Ram cushion stroke: 150 mm Ram cushion force: 200 t Ram return force: approx. 120 t Ram up position: 2350 mm Ram stroke: 1050 mm Air pins retracted by 185 mm Max. die installation height: 1190 mm Lower clamping: manual Upper clamping: manual Centering: via air pin pattern Sliding bolster: 3000 mm travel distance Ram locking: stepless Tedoxgz Rnepfx Adlsf Cut stroke damping: not available The above information is based on the machine documentation. The seller does not assume any liability for the completeness or accuracy of these details. The actual technical specifications and functions of the machine are decisive.

Condition: used, Year of construction: 2015, pressure 30 t throat 250 mm table-size 650 x 500 mm Tjdpfexz Hfmox Adlef stroke 400 mm dayligth min. 120 / max. 500 mm Control Simatic HMI Touch Siemens total power requirement 13 kW weight of the machine ca. 3,5 t dimensions of the machine ca. 2,5 x 1,70 x 2,85 m Setup mode and single stroke operating mode Machine light Two side tables with a support surface of 850x500mm with hydraulic ball bars for heavy workpieces

Condition: used, Single-column hydraulic press HIDROLIKSAN model C-Type 100 Serial no. C100UT16/16 Year of manufacture: 2016 Pressing force: 100 tons Ram stroke: 400 mm Throat depth: 400 mm Daylight (installation height): 495 mm Table size: 900 x 700 mm Ram area: 900 x 700 mm Max. tool weight: 500 kg Table height above floor: 1,000 mm Max. hydraulic operating pressure: 240 bar Hydraulic tank capacity: 180 liters Rapid approach speed: 30 to 100 mm/sec Pressing speed: 3 to 10 mm/sec Return speed: approx. 100 mm/sec Drive power: 11 kW Power supply: 400 V, 50 Hz - Table and ram with 18 mm T-slots - Operation via two-hand control console or manual control - SIEMENS S7 1200 control with Simatic HMI touch panel - SICK Flexi Soft safety control - SICK light curtain as reach-in protection in safety mode - Programmable ram stroke, pressing force, and stroke speed via control - Pressure and position shut-off - Pressure holding time infinitely programmable Todpsxf Uqrofx Adlof - Ram equipped with direct linear measuring system - Electrical control cabinet mounted on machine frame - Hydraulic oil cooler with fan motor (oil-air cooling) - Approx. 2,496 operating hours - UVV safety for manual loading, last inspection October 2024 Required installation space (L x W x H): 2,300 x 1,700 x 2,750 mm Weight: 8 tons Very good condition

Condition: good (used), functionality: fully functional, Hydraulische Pressen und Maschinenbau GmbH Hydraulic press, 70 9251 3, HES 16MP Todpfsumk Najx Adlof Model: 7092513 Type: HES16MP General: Display: 0-400kp/cm2 / 0-25Mp

Condition: used, Year of construction: 1961, pressure 025 t table-size 450 x 500 mm stroke 500 mm dayligth 550 mm throat 200 mm Tedpjxukpcefx Adljf table height over floor 800 mm hole in the table 130 mm

Condition: as good as new (ex-display), Year of construction: 2023, Technical data PDM100R-5393 Capacity [Tm] 100 DIMENSIONS OF THE BOTTOM PLATE [mm] 900x600 DIMENSIONS OF TOP PLATE [mm] 850x550 GUIDING COLUMNS (x4) [Ø mm] 50 WORKING HEIGHT [mm] 950 MAX. OPENING [mm] 600 STROKE [mm] 420 FREE RUNNING SPEED [mm/s] 50-230 WORKING SPEED [mm/s] 2-15 WEIGHT [kg] 3000 SERVO POWER - PDM100R The new SERVO hydraulic units from Bosch Rexroth are designed to increase productivity and reduce productivity and reduce energy consumption by up to 80 during downtime, tool changes and between cycles. Tsdpfx Aoq Ula Rsdljf cycles. Increased efficiency in operation! EQUIPMENT - Proportional p/Q control with SvP5020 from Bosch Rexroth - Adjustable speed values on PLC. - AOPD light barrier technology - 12" LCD display - Configurable working parameters on PLC. - 50 pre-stored programs available on PLC. - Prefilled valves for fast speeds - Maintenance-free bronze graphite bushes. - Simplified hydraulic unit to reduce maintenance maintenance work.

Condition: used, Year of construction: 1978, pressure 100 t stroke 150 mm throat 345 mm Tjdjvzxp Uepfx Adljf dayligth 400 mm table surface area 1200 x 600 mm table height over floor 850 mm ram surface 560 x 500 mm feed down 350 mm/s feed up 350 mm/s working feed 25 mm/s oil volume 560 l power requirement 22,0 kW Weight 8,3 t dimensions of the machine ca. 2,1 x 1,7 x 2,8 mxmxm permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, light guard (Sick), mechanical depth stop with hydraulic cutting impact cushioning, two-hand operation

Condition: used, Year of construction: 2015, pressure 30 t throat 250 mm table-size 650 x 500 mm stroke 400 mm Tedew D Hiaspfx Adlsf dayligth min. 120 / max. 500 mm Control Simatic HMI Touch Siemens total power requirement 13 kW weight of the machine ca. 3,5 t dimensions of the machine ca. 2,5 x 1,70 x 2,85 m Setup mode and single stroke operating mode Two side tables with a support surface of 850x500mm with hydraulic ball bars for heavy workpieces

Condition: used, Hydraulic Synchronizing Press, Spotting Press AGEO Type GHP 200 H6 4-Column Hydraulic Press, Tool Trial Press, Spotting Press Serial No. 21169 Year of manufacture: 1993 Pressing force: 200 tons Clearance between uprights (front): 1200 mm Upright opening (side): 650 mm Table surface: 1560 x 1010 mm Ram surface: 1560 x 1010 mm Ram stroke: 575 mm Draw cushion stroke: 300 mm Draw cushion holding force: 63 tons Draw cushion ejector force: 30 tons Max. installation height: 775 mm Table height above floor: 1000 mm Guide column Ø: 140 mm Clamping pin bore in ram: 64 mm Pressing speed: 0 to 10 mm/s, stepless Return speed: 0 to 20 mm/s, stepless Main motor power: 22 kW Control pump motor power: 5.5 kW Connection: 400 Volts, 50 Hz - Table and ram with 22 mm T-slots - Two pressure cylinders with electronic precision synchronization control - Stepless electronic stroke limitation (top and bottom with digital travel measurement and position display) - Mechanical safety support device (prevents ram from dropping due to dead weight) - Single-hand and two-hand operation - Electrical tool safety via signal contact - Pressure presetting independent of stroke (via keypad, digital pressure display) - Travel measurement system right and left via rotary encoders - Electrical control: MS-DOS PC with Ageo H v2.23 control software - Operator panel with swiveling display Todpfxswva I Ho Adlsf - Stroke movement and press force adjustable via joystick - Adjacent hydraulic power unit with electrical cabinet - Hydraulic draw cushion under the press table - Draw cushion with ejector function - Continuous stroke control - Floor-level installation - Electrical oil temperature monitoring - Operating manual with circuit diagrams Space required by press (upright) L x W x H: 1800 x 1010 x 3470 mm Space required for horizontal transport L x W x H: 3500 x 1800 x 1200 mm Net weight press: 13 tons Space for hydraulic power unit L x W x H: 1000 x 800 x 3040 mm Net weight hydraulic power unit: approx. 1 ton The machine was used as a tool trial press in a toolmaking workshop. Very good condition.

Condition: used, Year of construction: 1992, pressure 30 t chamfer lenght 1500 mm distance between columns 1240 mm control Konventionell throat 270 mm work height max. 900 mm total power requirement 4,5 kW weight of the machine ca. 1,2 t dimensions 1,8 x 1,33 x 1,86 m Hydraulic press brake Todpfx Aexwzfmodlsf - 2 x upper tools, 840 mm and 420 mm long - 1 lower tool, 400 mm long - Motorized backgauge - Foot switch - Two-hand release

Condition: excellent (used), Catalogue number 7830 TECHNICAL DATA - size of heating plate: 2200x1100 mm - number of batches: 1 - electrically heated shelf Todjxz Ebgspfx Adlof - total clearance: 280 mm - number of cylinders: 4 - cylinder diameter: 80 mm - total power: 10 kW - dimensions (L/W/H): 2540x1260x1860 mm - weight: approx. 2000 kg ADVANTAGES – German-made – electrically heated shelf – unpainted – very good condition – used press Net price: PLN 15,900 Net price: EUR 3,790 Net price calculated at an exchange rate of 4.2 PLN/EUR (In case of major exchange rate fluctuations, price may change)

Condition: used, Year of construction: 1986, - 2 pneumatic printing cylinders in length - 2 pneumatic pressure cylinders in width - 2 pneumatic workpiece hold-downs - feed belt width: approx. 680 mm Tedpeiim Rnsfx Adljf - feed belt length: approx. 3.400 mm - clamping area: 680 x 1.400 mm - control panel Machine dimensions: - Length: approx. 3,400 mm - width: approx. 1.700 mm - height: approx. 1.400 mm - Weight: approx. 800 kg

Condition: used, Year of construction: 1997, pressure 40 t throat 300 mm stroke 630 mm dayligth 900 mm table surface area 620 x 520 mm hole in the table 150 mm table height over floor 600 mm ram surface 150 mm total power requirement 15,0 kW weight of the machine ca. 4,5 t Tsdpjvuuckofx Adlof required space 1,0 x 1,9 x 3,0 m permitted for manual loading according to the CE Regulations with oil-hydraulic drive, controllable dependent on pressure/time and way, two-hand operation press can be inspected in running condition in our warehouse

Year of construction: 1975, condition: good (used), machine/vehicle number: MA1120, Weight [kg] Approx. 7000 Connected load 380V / 5,5 PS Stroke [mm] 300 Tedpfx Asg R Iwbsdljf Gear [rpm] 1450 Table size [LxW] 500/600 Accessories Operating instructions / Circuit diagrams / Hydraulic diagrams / Press test manual

Condition: good (used), Code: 0160 Brand: SMC Model: REGO 92 CP Automatic oleodynamic clamp press with movable crossbar for wooden frames, sashes, doors, frames and various - CE Standard Technical data: Useful working dimensions mm 3000 x 2000 N° 2 horizontal cylinders N° 2 vertical cylinders Motor Kw 3 Tedpfewx Ru Asx Adlef N° 2 crossbar support positions Push-button control panel Safety photocells Overall dimensions mm 3600 x 1300 x 2800 h Weight kg 1850

Condition: new, Technical data: Capacity: 100 t Installation height: 1010 mm Max. working area: 1010 x 300 mm Piston stroke: 400 mm Advance speed: 7.12 mm/s Return speed: 13.42 mm/s Motor power: 4 kW Width: 1600 mm Depth: 850 mm Height: 2450 mm Weight, approx.: 1000 kg Features: - Side-shifting cylinder - Generous working area - Height-adjustable table - Torsion-resistant design with welded steel construction - Pressure gauge - Fine pressure adjustment - Additional hand pump Todpok Nz N Eofx Adljf Support prisms available at extra cost.

Condition: used, Year of construction: 1980, . 52965 pressure 10 t Tjdpfxjvxlr Do Adlof oil contents 110 Liter +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: good (used), For fully automatic assembly of frame parts. Outer frame dimensions: min. 120 x 120 mm Tsdodhdg Iopfx Adlef max. 700 x 2.500 mm

Condition: used, Year of construction: 1990, pressure 60 t throat 400 mm stroke 600 mm dayligth 700 mm table surface area 1120 x 700 mm table height over floor 850 mm ram surface 700 x 700 mm Tsdpfxsvut Edj Adlsf feed down 300 mm/sec feed up 130 / 260 mm/sec feed under pressure 5 / 10 mm/sec oil volume 275 l total power requirement 7,5 kW weight of the machine ca. 7,3 t required space 1,6 x 2,0 x 3,7 m permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, controllable dependant on pressure/time and way, two-hand operation can be inspected in running condition in our warehouse - new control can be offeren on request

Condition: new, Technical Data: Capacity: 60 t Installation height: 820 mm Max. working area: 820 x 300 mm Piston stroke: 400 mm Advance speed: 6.1 mm/s Return speed: 10 mm/s Motor power: 3 kW Width: 1460 mm Depth: 850 mm Height: 2400 mm Weight, approx.: 700 kg Features: - Laterally movable cylinder Tjdpfx Adsk Nz Ndelof - Generously sized working area - Height-adjustable table - Torsion-resistant design made from welded steel - Pressure gauge - Fine pressure adjustment - Additional hand pump Support prisms available at extra cost.

Year of construction: 2000, condition: used, To the fully automatic Assembly of frame parts. Frame dimensions: min. 120 x 120 mm 1050 x 2,500 mm 2 heating Rails Todpfxjd H Irfj Adljf

Condition: new, Technical data: Capacity: 160 t Installation height: 1100 mm Max. working area: 1100 x 350 mm Ram stroke: 400 mm Advance speed: 6.2 mm/s Return speed: 6.8 mm/s Motor power: 5.5 kW Width: 1640 mm Depth: 1000 mm Height: 2550 mm Weight, approx.: 1300 kg Equipment: - Laterally adjustable cylinder via rack, pinion, and handwheel - Spacious working area - Height-adjustable table - Torsion-resistant design with welded steel construction - Manometer - Fine pressure adjustment - Additional hand pump Tedpfxok Nz Ntj Adlof Support prisms available at extra cost.