Used Frame Press for sale (19,789)

Condition: new, Year of construction: 2025, functionality: fully functional, 125 T C-Frame Servo Press with 50 T Ejector, DUPLOMATIC Hydraulics Reduced power consumption by up to 40% compared to conventional motors, thanks to servo-hydraulics. TECHNICAL DATA: - Press capacity: 20–125 T (adjustable) - Maximum installation height: 1000 mm - Usable table surface: 2200 x 750 mm - Usable ram surface: 980 x 750 mm - Ejector cylinder capacity: 50 T Nedox Aqtqjpfx Ahzjcl - Ejector cylinder stroke: 200 mm - Frame type: C-frame - Guide column diameter: Ø 100 mm (4 pieces, in corners) - Table height from floor: 870 mm - Overall dimensions approx. (W x D x H): 2400 x 2000 x 3300 mm - Approx. total weight: 8,700 kg - Clamping device for die centering: 50 mm diameter - Prepared for vibration dampening plates: 30 mm - Prepared for ROBO connection: yes HYDRAULIC CYLINDER: - Piston stroke: 0–700 mm (adjustable) - Max. operating pressure: 245 bar - Return speed: 300 mm/sec - Ram speed under load up to 25%: 25 mm/sec - Ram speed under load up to 50%: 14 mm/sec - Ram speed under load up to 80%: 7 mm/sec - Ram speed under load up to 100%: 6 mm/sec - Idle speed: 300 mm/sec HYDRAULIC POWER UNIT: - SERVO hydraulic pump (brand: DUPLOMATIC): 143 L/min (1 piece) - SERVO motor power: 15 kW (1 piece) - Pressure accuracy during pressing stroke: +/- 5 bar - Pre-fill valve: NG-160

Condition: excellent (used), Year of construction: 1992, 4.5 kW motor Ncodpfxjtq S H Ae Ahzjl Working height 245 cm Working width max. 365 cm

Condition: used, Year of construction: 1992, functionality: limited functionality, machine/vehicle number: 070992, We are offering our S&S hydraulic frame press, model Super, for sale due to the acquisition of a new machine. The machine has been used in our workshop for gluing window frames and is equipped with an automatic pressing cycle for mortise and tenon joints. Currently, this function is inoperative due to a technical issue with the control unit. The control unit was recently sent out for repair and should be operational again soon. Nodpex Ruvzjfx Ahzjcl

Condition: used, Single-column hydraulic press SCHÖN type TES/C Year of manufacture 1977 Pressing force 63 tons (160 bar) Thrust 320 mm Table size 600 x 770 mm Ram surface 600 x 400 mm Ram stroke 125 mm Max. installation height 400 mm (with intermediate plate on the ram) Rapid downward traverse speed approx. 180 mm/sec. Rapid working speed approx. 25 mm/sec. Rapid upward traverse speed approx. 180 mm/sec. Table height above floor: 870 mm Drive power: 22 kW Power supply: 380 volts, 50 Hz Tank capacity: approx. 280 liters of hydraulic oil Njdpfx Asv Tp D Tohzscl - Adjustable fixed stop - Electric two-hand operation - Intermediate plate on the ram: L x W x H 500 x 500 x 50 mm Space requirement: L x W x H 2400 x 1100 x 2750 mm Weight: 4 tons Good condition

Condition: excellent (used), Year of construction: 1984, functionality: fully functional, Hydraulic frame press The machine is complete and fully operational Working range 3000 x 2000 mm Nodpfx Ahexmr Spjzscl

Condition: excellent (used), Year of construction: 1985, functionality: fully functional, The machine is fully operational and in good condition. Nedpfjxmr Rxjx Ahzecl Working dimensions: 3200 x 2200 mm Dimension adjustment is electrically controlled from the control panel. Powered by a hydraulic unit.

Condition: used, Year of construction: 1986, - 2 pneumatic printing cylinders in length - 2 pneumatic pressure cylinders in width - 2 pneumatic workpiece hold-downs - feed belt width: approx. 680 mm - feed belt length: approx. 3.400 mm - clamping area: 680 x 1.400 mm - control panel Machine dimensions: - Length: approx. 3,400 mm - width: approx. 1.700 mm - height: approx. 1.400 mm Ncedpfx Ahoiim Rnozsl - Weight: approx. 800 kg

Condition: good (used), For fully automatic assembly of frame parts. Nsdpfx Ahjdhdg Iszecl Outer frame dimensions: min. 120 x 120 mm max. 700 x 2.500 mm

Condition: used, Year of construction: 2000, To the fully automatic Assembly of frame parts. Frame dimensions: min. 120 x 120 mm 1050 x 2,500 mm 2 heating Rails Ncedpfxsd H Irfs Ahzol

Condition: ready for operation (used), total height: 2,140 mm, total width: 865 mm, total length: 1,665 mm, passage width: 1,100 mm, power: 2.2 kW (2.99 HP), empty load weight: 970 kg, load capacity: 100,000 kg, Arlo 100 T / 1000 Vario Max ram adjustment: 380 mm Drawningspeed: 7,54 mm/sec Workingspeed: 2,47 mm/sec Ncodpfx Asxc Rbbehzsl Returningspeed: 9,06 mm/sec

Condition: new, Year of construction: 2024, manual hydraulic frame and edge press 1-sided, stationary > strong welded steel frame > frame pressing system with continuous counter pressure beam on the left side > 1 movable slide (machined surface) for horizontal calibration of width, adjustable in 50 mm increments; with bolt for central locking > 2 manual hydraulic cylinders, horizontal adjustable, pressing strength of 20.000 N each and stroke of 60 mm > 5 vertical pressing units on ball bearings in galvanized structural steel with manual hydraulic cylinders, pressing strength of 20.000 N and stroke of 60 mm pressing units adjustable in 50 mm increments; bearings adjustable six fold and with drop out safety lock; bearing and pressure plate: 40 mm long and 80 mm deep > 1 zinc-plated adjustable hold-down bar with screw clamp, manual to be unhinged > painting: grey-white RAL 9002, abutment and pressing plate blue RAL 5010. > also available with more or less vertical pressing units art.no. Q 007 (as listed in accessories and options) working space as frame press (w / h in mm): 2700 x 1800 Ncedpfx Aeyuxkehzol working space as edge press (w / h in mm): 3000 x 1800 overall dimensions (w / h / d in mm): 3340 x 2350 x 730 Price additional packaging costs 92,- netto

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, total width: 1,800 mm, total length: 4,500 mm, total height: 3,500 mm, working height: 2,100 mm, working width: 3,000 mm, overall weight: 2,700 kg, input frequency: 50 Hz, height adjustment type: electric, power: 5.5 kW (7.48 HP), compressed air connection: 6 bar, type of input current: DC, Technical Description – Casolin Junior Frame Press The “Casolin Junior” frame press is a hydraulic vertical frame press designed for the efficient production of medium and large series of window and door frames. Manufactured by the Italian company Casolin G. & C. s.n.c., it is constructed for industrial manufacturing processes in woodworking and window production. Purpose of Application This machine is used for hydraulic pressing and assembly of window and door frames after pre-gluing or initial assembly. It ensures uniform pressure distribution and high pressing force to achieve precise frame geometry and a durable connection of components. Design and Function The Casolin Junior is a vertical, free-standing hydraulic press. It consists of a robust steel frame with hydraulic vertical and horizontal cylinders that close and clamp the frame elements over defined pressing paths. The pressing force is generated by an electrohydraulic system that enables both vertical and horizontal pressure movements. Key Features: * Hydraulic Pressure: The machine operates with independently adjustable hydraulic cylinders for vertical and horizontal pressing movements to ensure stable and even force distribution on the frame. * Self-centering Horizontal Cylinders: These ensure that pressure is always applied centrally to the frame structure, increasing the quality and precision of the press joint. * Ergonomic Operation: Control panel with clearly arranged controls for simple handling and setting of pressing parameters; optionally, an optoelectronic measuring and control system can be integrated for automatic adjustment of pressing dimensions. Ncodpfx Ahjx Np Ebszel * Usable working height (min–max): approx. 350 – 2,100 mm * Usable working width (min–max): approx. 250 – 3,000 mm * Vertical pressing force: approx. 900 – 9,000 kg * Horizontal pressing force per cylinder: approx. 280 – 2,800 kg * Horizontal cylinder stroke: approx. 100 mm * Hydraulic pump capacity: approx. 4 – 5.5 kW * Weight: approx. 2,700 kg * CE marking: machine complies with relevant CE standards. Dismantling and removal by the buyer, as soon as possible.

Condition: ready for operation (used), Maximale druk: 250 ton Tafelafmetingen: 620 x 600 mm Tussen kolommen: 620 mm Maximale opening: 500 mm De onderste en bovenste tafels zijn verwarmd Maximale temperatuur: 200° C Hydraulische motor 5,5 kW (11 ampère) Elektrisch gezekerd 100 ampère Hoogte: 2600 mm Gewicht: 6 ton Ncsdpjwlkxhefx Ahzsl

Condition: used, Year of construction: 1994, Frame press Schafberger & Sprödhuber Type Super 4 Kw Ncjdpfx Ahjilurnezol 3 m x 6 m

Condition: new, Bernardo Frame Press HRP 3000 Robust and torsion-resistant hydraulic frame press with high-quality pressure cylinders. Whether it is used for furniture or door production, block or frame gluing, the high pressing force of 2,000 kg per cylinder and precise, angle-accurate pressing of large-sized components enable all tasks to be carried out effortlessly. Technical Specifications Working length: 2,400 mm Working height: 1,550 mm Cylinder stroke: 95 mm Pressing force: 2,000 kg Vertical hole pitch: 50 mm Horizontal hole pitch: 160 mm Overall length: 3,250 mm Overall height: 2,070 mm Frame depth: 925 mm Weight: approx. 315 kg Features • Versatile use, e.g. for frame, window, and door production • Robust frame press with solid steel construction • Centralized control of the hydraulic cylinders including pressure gauge • Efficient gluing thanks to hydraulic design • Pressure cylinders equipped with rocker plates as standard Scope of Delivery Nsdpfexrnvbex Ahzocl • 4 movable pressure beams, each with one vertical hydraulic cylinder and counter support • 1 movable pressure beam with two horizontal hydraulic cylinders • 1 movable, adjustable pressure yoke

Condition: new, pressure: 125Tappet adjustment: (automatische Verstellung) 40stroke lenght (max.): 10-125total power requirements: 11weight approx.: 8000messurements (LxWxH): 1800 x 1500 x 2600 Ncjdpfx Aoktm N Dohzol

Condition: new, pressure: 150Tappet adjustment: (automatische Verstellung) 40stroke lenght (max.): 10-125total power requirements: 15weight approx.: 9500messurements (LxWxH): 1800 x 1500 x 2600Stroke/min: 50-90 Machine Technical SpecificationsCE Compliance: The machine and all equipment are manufactured in accordance with CE regulations Light Curtains: SICK or PILZ PLC Control: Siemens S7-1200 Stroke Adjustment: Directly via the touchscreen interface Balancing System: Integrated Stroke Speed Adjustment: Via Mitsubishi frequency inverter Machine Frame: Full steel construction Guidance System: Inner and outer eccentric guides Crankshaft: Made of hardened 4140 steel Clutch & Brake: Pneumatic combination system Safety Valve: Dual-way safety valve Safety PLC: SICK or PILZ Ncodpfx Ahjtqwtdszjl Operation Modes: Two-hand operation and foot pedal available Lubrication: Automatic centralized lubrication system Overload Protection: Hydraulic overload system Safety Guarding: Protective enclosure around the working area External I/O: 8-pin I/O ports on PLC (for external connections and signal exchange) Anti-Vibration: Rubber dampers under the machine feet (1 pair – 4 pieces) Power Supply: 400 V / 50 Hz Required Fuse: 32 A Control Panel: 19 Siemens touchscreen ? Main Technical DataOperation Modes: Inch / Single stroke / Continuous stroke Press Force: 150 tons Table Dimensions: 750 × 1000 mm (fixed table) Stroke Length: 10–125 mm (automatically adjustable via PLC) Ram Dimensions: 500 × 800 mm (Ø55mm pin receptacle & T-slots customized to customer needs) Stroke Rate: 50–90 strokes per minute Main Motor: 15kW (1,400 rpm) Throat Depth: 325 mm Shut Height: 475 mm (adjustable down to 295 mm) Ram Bore Diameter: 50 mm Machine Dimensions:Length: 1,800 mm Width: 1,500 mm Height: 2,600 mm Machine Weight: approx. 9,500 kg Ram Adjustment: 40 mm (automatic adjustment)

Condition: used, Single column eccentric press KRUPP type PEKRD 125 h Machine No. 2861 Year of construction 1977 pressure force 125 ton. throat 400 mm table size 950 x 750 mm Njdjdzqddepfx Ahzecl ram area 800 x 540 mm table opening 100 x 250 mm stroke adjustment 8 to 160 mm ram adjustment 100 mm Installation height of largest stroke at top max. 550 mm Stroke rate 60 strokes/min. Table height above floor 800 mm Motor power 10 kW Mains connection 380 Volt, 50 Hz - Hydraulic overload in ram - Compressed air clutch-brake combination ORTLINGHAUS - ram weight balancing cylinder - motorized ram adjustment - Table plate with ball rollers - Two-hand operation - grease central lubrication HELIOS - stroke counter - UVV 7n 5.1 §4a, paragraph 2 No. 3b for manual insertion work Space requirement L x W x H 2300 x 1800 x 3200 mm weight approx. 10 ton. good condition (very little used)

Condition: used, Working width 4000 mm Working height 2600 mm Number of cylinders 6 St. Dimensions (L/W/H) 5300 x 1250 x 3330 mm S&S frame press type RP 2000, ----- C E - version Stable frame welded construction made of thick-walled special hollow profiles, Sliding carriage and pressure bar with 50 mm hole pattern. Continuous abutment on the left for width compression, lower abutment in two levels. Vertical press cylinder on special pressure bar with one-hand quick adjustment with weight compensation in the 50 mm hole pattern, height-adjustable, long Sliding carriages ensure the permanent absorption of high pressing forces. Fast, smooth width adjustment with ball-bearing carriage Central locking, fixation in 50 mm hole pattern. Upper horizontal press cylinder infinitely adjustable in height and with Equipped with counterbalance. Lower horizontal press cylinder with center holes for the two Abutment levels, with weight compensation. Abutment and pressure plate depth 100 mm Printing plate and support width 130 mm Machine electro-hydraulically controlled, with 2 vertical pressure cylinders d = 50 mm, stroke 120 mm double-acting, with counterweight and One-hand quick adjustment, 2 pieces Horizontal pressure cylinders d = 40 mm, stroke 120 mm double-acting, with weight balancing; 2 manual control valves, Pressure gauge, 1 pressure control valve from 20 to 125 bar corresponds to 400 to 2400 kg pressure vertical, with 3 kW three-phase motor for 400 volts, 50 Hz operating voltage. Complete with electrical connection. Paint finish: RAL 7035 light gray with RAL 7016 anthracite grey Working size: 4000mm x 2600mm (length x height) Required space: 5300 x 1250 x 3330 mm (L x W x H) Machine including the following options: ----- Article .00 pc Medium pressure bar with pressure cylinder double-acting, weight compensation, pressure hose and shut-off valve up to 2600 mm high Article .00 pc Individual pressure control for medium pressure bar, Pressure control range up to max. 100 bar (for pressing crossbar windows) Article .00 pc Cross printing device complete with pressure cylinder double-acting, weight compensation, pressure hose and shut-off valve There is no weight compensation on the lower horizontal cylinder Article .00 pc Individual pressure control for transverse pressure device, Pressure control range up to max. 100 bar (for pressing crossbar windows) Article .00 pc Shut-off valve on the 3rd vertical cylinder Article .00 pc Shut-off valve on the upper horizontal cylinder Article .00 pc Width allowance for compression of small frames to bridge the 1st pressure beam, including shut-off valve on the 1st vertical cylinder Article .00 pc Basic equipment for counter profiles The space required in height increases by 100 mm Item All pressure plates and abutments covered with plastic Article .00 pc Triangle studio window pressing device consisting of: locking device of Vertical pressure bar and 3 attachable, side-guided pendulum pressure plates Article .00 pc double pendulum pressure plate for pointed windows (triangle) ----- Total price in the above version ex works: On request! ----- Ncsdsu Uvaljpfx Ahzol Options: Article ....

Condition: used, Year of construction: 1990, functionality: fully functional, machine/vehicle number: HL 2100 4290 0215, Hess Pressen Type: Hydro-LUX Year of manufacture: 1990 Ncodpfx Aoxqcdwehzol Serial No.: HL 2100 4290 0215 380V 2.6 kW

Condition: used, Year of construction: 1992, Used machine Year of manufacture: 1992 Features and technical specifications: Electro-hydraulic frame press control Nodswwxywjpfx Ahzjcl Pressing force up to 1,200 kg Two movable longitudinal pressure beams mounted with double ball bearings and guide rails These rails allow for continuous height adjustment of the cylinders The press cylinders can be adjusted via quick-release pressure lever with automatic locking Two electro-hydraulic control valves (with 3 switching stages) operated by hand levers This allows for precise pressing and assembly of even the most complex frame constructions Working height x working length: 2,000 x 3,000 mm Equipped with 3 vertical pressure cylinders Equipped with 2 horizontal pressure cylinders Stroke of pressure cylinders: 120 mm Three-phase motor: 1.3 kW Pressure control unit / pressing force adjustable: 0 - 60 bar Space requirement: 3,950 x 900 x 2,550 mm Weight: approx. 620 kg Availability: short-term Location: Flörsheim

Condition: excellent (used), Year of construction: 1986, Frame press T2 RP year of construction 1986, 2,2 kw Ele..-Hydraulic Ncodpfx Asu Rp Eishzjl 3 press cylinders vertical, 2 horizontal Adjustable pressing pressure 0 - 2000 kg 2500 x 3000 mm pressing size Space requirement 4000 x 950 x 2600 mm

Condition: excellent (used), For sale: Hofer press in good working condition. Ncedpex Rrw Nefx Ahzol

Condition: used, Technical data: 3 sections 6400 mm long Press sections can work together or individually Maximum dimensions of glued element: 4600x1180x200 mm in one section Hydraulic clamps 24 upper/vertical - 8 per section Movable vertical front clamps 24 - 8 per section Ncsdex Id Dispfx Ahzjl Power supply: 400 V Motor power: 2.2 kW Overall dimensions: Length: 19 200 mm Width: 1200 mm Height: 2300 mm

Condition: ready for operation (used), Year of construction: 1993, functionality: fully functional, machine/vehicle number: 9306005, Motorquickomat Z Automatic width and height adjustments Wood scanning Controlled pressing time Nedpfxswa Sxxs Ahzscl