Used Belt Press for sale (37,455)

Condition: used, Year of construction: 2023, Operating hours: 1,851 h, Technical data baler: Manufacturer Avermann Maschinenfabrik GmbH & Co. KG, Germany Type AVOS 1410 BS-22/50 Year of construction 2023 Pump operation hours 1,851 hours, as of July 24 Press power main press 70 t (a 70 tonne hydraulic cylinder is installed, special equipment) Specific press force 90,9 N/cm² (a 70 tonne hydraulic cylinder is installed, special equipment) Feed channel 1,400 x 1,000 mm Theoretic cycle time 13 sec Theoretic throughput capacity 266 m³/h Bale size 1,100 x 750 (w x h), the length is variable Drive power 22 kW Connected load 65 kW Tying system 4-fold, vertical, fully automatic Dpkru2 Throughput capacity at a bulk weight of 30 kg/cbm approx. 5,5 t/h bulk weight of 50 kg/cbm approx. 7,5 t/h bulk weight of 100 kg/cbm approx. 9,7 t/h Bale weight with a bale length of approx. 1.2 m up to 500 kg, depends on material SPS controller Siemens S7-1500 Operating panel Schneider Harmony Baler dimensions built up 8,610 x 2,400 x 3,835 mm (l x w x h) Transport weight baler approx. 17 t Special equipment: Wear-resistant floor made of HARDOX steel Larger main hydraulic cylinder with 70 tonnes of pressing force Special press ram for pressing loose bulk materials with small grain sizes OptiCut XS system for lower cutting forces and higher throughput rates Special pressing piston for pressing "difficult" materials Technical data for the conveyor belt: Manufacturer Avermann Maschinenfabrik GmbH & Co. KG, Deutschland Type KGF GB 1500 Year of construction 2023 Drive power 4.0 kW Belt speed approx. 0.3 m/second Length feeding conveyor 2,679 mm Length elevating conveyor 6,866 mm Length goose neck 1,272 mm Grade 35° Effecting width 1,400 mm Side wall height 800 mm Carrier height 50 mm Carrier distance 750 mm Belt quality EP 400/3, 3:1 (DIN quality N) Overall height 4,515 mm Overall transport dimensions11,148 x 2,502 mm (l x w) Technical data on the non-contact personal protection system: Manufacturer BOREMA Umwelttechnik AG, Switzerland Type APSS iBOR 22 Year of construction 2023 Condition of the press system: The entire system is in very good condition due to the short operating time of only 1,851 pump hours and the processing of only paper, cardboard and film. Scope of delivery: Avermann baler, type AVOS 1410 BS-22/50, incl. wire drawing stations and bale chute Avermann conveyor belt, type KGF GB 1500 BOREMA personal protection system, type APSS iBOR 22 Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: good (used), 1 x Voran continuous band / belt press with pneumatic belt tensioner, automatic belt control and high pressure belt cleaner. Model - EBP 650. Dpbbrt Date of manufacture - 2018. Output capacity - up to 1,500 kg/h. The mash is applied to the belt in a uniform layer by the adjustable metering box, at the end of the pressing sequence the pomace is removed from the belt by a scraper. Location - London, UK. UKFM2-4357.

Year of construction: 2024, Condition: new, Our belt presses are equipped with two large pressing rollers, which means that the pressing process takes longer and the machine is pressed more gently. The result is high quality juice that is free of turbidity and foam. Pneumatic belt tensioning and automatic belt control ensure higher quality. Blox0Ledva The belt press is equipped with an automatic brush cleaning system. You do not need a high-pressure cleaner for belt cleaning, as the belt is cleaned with six special water nozzles. All you need is a compressor with a pressure capacity of 8 bar and a ½" water connection for cleaning. Thanks to the special nozzles, you use less water and have lower operating costs. The open system ensures quick cleaning. The system can be cleaned within a few minutes. Technical data: - Nominal capacity: 950 kg/h - Power requirement: 1 kW, 230 V, 16 A - Material: Wnr. 1.4301, AISI 304 stainless steel - Compressed air requirement: 50 L/h 6 bar - IP65 electronic control cabinet - Juice yield: Up to 75% - Fully automatic and infinitely variable regulation of the belt speed - User-friendly - Easy to clean - Rollable machine feet Dimensions Length: 2230mm Width: 1450mm Height: 1250mm Height of intake: 1240mm Height pomace ejector: 500mm Height juice outlet: 370mm Weight: 540 kg

Condition: ready for operation (used), Year of construction: 1993, Belt width: 2.000 mm, E-drive 11 kW, dimensions: 2,5 x 2,75 x 1,78 m, weight: approx. 2,4 t., material: 1.4571 Sxsx9

Year of construction: 2015, Condition: excellent (used), Functionality: fully functional, Belt press with pneumatic belt tensioner, automatic belt control, high pressure belt cleaner. The mash is applied to the belt in a uniform layer by the adjustable metering box, at the end of the pressing sequence the pomace is removed from the belt by a scraper. Pws8Fv93Nj

Year of construction: 2014, Operating hours: 2,520 h, Condition: excellent (used), Functionality: fully functional, Machine/vehicle number: M0003405B/00003, Has been operated only 280h per year. Cvvh9Q3Aj8 new belt, new pressure sensor, new belt position air silinder, new belt position bearings. Specifications: capacity up to 300 kg/h power: drive motor 0,37 (0,5) kW (PS) washing machine motor 0,12 (0,16) kW (PS) electric outlet 400V 50Hz (3 phases) fuse 16 A dimensions: length 1 280 mm width 870 mm height 1 350 mm insertion resp. discharge height 1 265 mm belt width 350 mm belt length 4 900 mm spread width 240 mm spread height (infinitely adjustable setting) 0 - 50 mm weight 350 kg material 1.4301 / AISI 304 juice yield bis zu 75 % belt speed 2 m/min contact time 1 min water consumption for cleaning 2 l/min connections: sewage connection Ø 48,3 mm juice discharge connection 1 “ juice discharge height 420 mm sewage discharge height 120 mm pomace discharge height 700 mm suitable for pomaceous and stone fruit Line consists of following equipment: 1. washing conveyor VORAN RM2.2 SA --- 400V 50Hz (3-phase), 2,2kW --- LxWxH:2620x700x2100 mm 2. Belt press VORAN EBP350 --- 400V 50Hz (3-phase), 0,5kW --- LxWxH:1280x870x1350 mm 3. Collection tank 65L with pump --- 400V 50Hz (3-phase), 0,75kW --- LxWxH:1250x508x290 mm 4. Screen filter DN25/DN10 --- wall mount, parallel filters for continuous cleaning, 0,25mm and 0,10mm filter screens available, 2xDIN11851 male connectors --- LxWxH:500x150x600 5. 2x Juice tank 220L --- 220L, base DIN11851 male connector with valve, side DIN11851 male connector with valve --- LxWxH: 550x550x1400 mm 6. Electric automatic pasteurizer Gebhardt EHA27E --- 400V 50Hz (3-phase), 27kW --- 750x500x1150 mm 7. Semi-automatic bag in box filler VORAN MBF500 --- 230V 50Hz (single-phase) --- LxWxH: 900x700x923 mm (dedicated table with steps and wheels LxWxH:1150x700x900) 8. Bottle line filler RIEMPITRICE B.6 A C.G --- DIN11851 male connector --- LxWxH: 900x500x1700 mm 9. Hoses and fittings DIN11851 Aisi 304

Year of construction: 2020, Operating hours: 150 h, Condition: like new (used), Functionality: fully functional, Very complete pressing system for hard/soft glass! The set was delivered new from the manufacturer Maurer in September 2020, so it is just 3 years old. Maurer makes quality equipment in Europe and provides up to 5 years warranty on construction. Not used much so can last for decades to come! The complete set includes: Bin tipper with valve to control speed MaurerMKLB300 Belt conveyor, speed infinitely adjustable Maurer MKVS2000 Doezyv Fruit washer and grinder (with different sieves for different products/ coarseness), stop and go system so the grinder and press work together. Maurer MDK 1500 Belt press with brush and automatic belt cleaner Maurer MKSP 900 Juice collector with automatic pump Maurer MKT 100 Nilfisk high pressure cleaner for cleaning the press belt MC 4M 180/740XT Impeller pump 12000 liters per hour (also suitable for pulp) Maurer MKJ120 The impeller pump and de-pitter can be bought separately. The rest only as a complete set. Capacity of the press is 900 kg/h (the conveyor belt 2500 kg/h and the fruit washer up to 1500 kg/h) with a pressing efficiency of max 75%, on average we were above 70% depending on the fruit. We are selling the set because as a company we want to focus on our other activities. In recent years we have achieved good turnover with this equipment and if you go for it you can set up a very lucrative business. In addition to potential customers, you also get advice and information so you can get started right away! Basically you can press all hard and soft fruits but also vegetables, some examples are: Apples Pears Quinces Watermelon Cucumber Beet Pineapple Ginger Turmeric Strawberries Blackberries Raspberries Red currants Cherries Apricots Peaches Nectarines Plums Grapes Kiwi Green herbs If you would like more information about the equipment, I would be happy to send you a document with the links to the equipment. For questions please message or call. Transportation needs to be arranged by yourself.

Condition: defective spare-parts repository (used), Year of construction: 1995, Functionality: not functional, Machine/vehicle number: PEE I 400, Pressing force: 400 t, Ram stroke: 140 mm, used eccentric press incl. functional belt device, details according to type plate, inspection possible at any time Main shaft and drive motor are to be replaced/renewed Cgi0Ahi9Co

Condition: used, Year of construction: 1988, Type of input current: three-phase, Power: 110 kW (149.56 HP), Used Amandus Kahl C35-780 Pellet press Incl. Kahl band cooler KC 101-06 Hydraulic nut with pump and hand pump 4 rollers head 5 rollers head Bipknu2Zy8S 5 new rollers New die and used die Various spare parts

Year of construction: 2024, Condition: new, Functionality: fully functional, Belt press POWERPRESS 300 is designed for pressing fruit, berry and vegetable mash. Fruit mash is supplied on the belt which presses it against shafts. The obtained juice flows into a small collection tank under the press with filtration sieve on top. Then the external pump or juice collection tank with pump transfers the juice from the press to a desired storage tank or straight to ROCKET pasteurizer for further processing. The pressing process is continuous. Dph3X9 Capacity: 300 kg/h The most cost-efficient belt press in the market! The most evolutionary feature of our Belt press POWERPRESS 300 is one huge pressing shaft, which lets the machine to maintain the longer pressing time (belt length is 4900 mm) and huge shaft dimensions squeezes the juice efficiently by saving the costs and space. The juice yield of apples using our belt press is ~65-75 %. The yield highly depends on freshness and variety of fruits. There is a filtration sieve integrated into the juice collection tank. Because of that the belt press 300 filtrates the juice even during the pressing stage providing cleaner and purer product. The belt press includes a high-pressure washer, which continuously washes the belt of the machine. Our belt washing system is simple, does not contain any engines or reducers, so it prolongs the use time and saves service costs. Adjustable fruit inlet lever lets fruit mash supply onto the shaft easily. Crushed fruit mash can be supplied from MAXIMILL or straight from a bucket or basket. After work, belt press should be manually washed with a water stream. A full washing process takes around 15 minutes. Washing is simple and all the parts of the belt press are easily removable without any tools. Belt tension is adjustable. The machine is made entirely of stainless steel and has adjustable feet. Easy to clean with no closed or inaccessible spaces, all parts are easy to assemble.

Condition: ready for operation (used), Functionality: fully functional, Mobile sludge press/screen belt press for sale. Dcyxagr Completely overhauled, partly with new parts. Ready for immediate use. Item location: Ernst-Heinkel-Straße 6, 48531 Nordhorn, Germany

Year of construction: 2024, Condition: new, Our belt presses can be dismantled and cleaned in just a few minutes without tools! The belt press is easy to operate. Effective belt cleaning is achieved by three spray nozzles and silicone scrapers. This innovative solution allows the system to be operated economically to produce fruit and vegetable juice. You do not need a high-pressure cleaner and save electricity costs when pressing. All you need is a compressor with a pressure capacity of 8 bar and a ½" water connection. - Fully automatic and infinitely variable regulation of the belt speed - Easy to clean - Easier maintenance - Rollable machine feet - Automatic belt correction Technical data Nominal capacity: 350 kg/h Working width: 400 mm Juice yield: up to 75% Power requirement: 0.55 kW, 400 V, 16 A Material: Wnr. 1.4301, AISI 304 stainless steel Air operating pressure: 6 bar approx. 50 L/h Blrh7Ld2P3 Dimensions Length: 1080mm Width: 1070mm Height: 1320mm Weight: 297 kg Optional: automatic juice emptying

Year of construction: 1989, Condition: ready for operation (used), Functionality: fully functional, TECHNICAL DETAILS C00Esk0Dew pressure: 160 t table: 1250 x 850 mm Stroke: 20-160 mm Strokes: 20-100 per min EQUIPMENT - with complete conveyor system - hydraulic overload protection - pneumatic clutch - 2- connecting rods

Year of construction: 2003, Condition: good (used), Manufacturer: Limus Kft (ALTERRA Kft) Type: LIM-1.5/a Year of manufacture: 2003 Performance: 2-4 m³/h Engine: Manufacturer: Sew-Eurodrive Power: 0.37 kW Electrical data: 50 Hz, 220 V P0Zfo3Lp Belt press dimensions: 2150 x 950 x 1900 mm With stand: 2150 x 1850 x 1900 mm

Condition: like new (used), Year of construction: 2019, Functionality: fully functional, 1 SMICON belt separator incl. screw conveyor incl. 1 screw conveyor The BS260 belt separator is suitable for unpacking small quantities and batches of food products. Particularly suitable for kneadable and water-containing products packed in plastic. Unpackaged organic waste can also be pressed into a pulp. In addition to its function as a depackaging machine, the belt separator can also be used to subject the organic dimensions of other depackaging systems to further or renewed cleaning and separation of moist and liquid components. Screw lengths in mm: 1 x 3800 Screw conveyor specifications: - 304 stainless steel design - Trough plate RVS-304 3 mm. - Trough with cover made of stainless steel -304, closed with screws - executed with stainless steel plate with hard steel strips. - Construction not painted - Spiral type: Steel spiral (without shaft) - Shaft seal: Stuffing box with stainless steel housing and stuffing box - fastened with anchor bolts - Control integrated in BS 260 Boesvvx8Y8J

Year of construction: 1990, Operating hours: 30,000 h, Condition: ready for operation (used), Functionality: fully functional, Used belt press for continuous sludge dewatering for sale Year of construction 1990 Operating hours approx. 30,000 h Description Belt filter press for continuous sludge dewatering Structure of the belt filter press Switch and control system (ROMPF) Fully automatic flocculant treatment plant (ROMPF) NEMO sludge pump (NETZSCH) Technical condition: The plant is completely ready for operation. The entire system was serviced and repaired once a year (documentation/documents available) Mint screen belt as spare part is included. Technical data Manufacturer / type: ROMPF / KR 1700 M Active filter belt length: 8.50 m Active filter belt area: 14.50 m² Drive power: 3.2 kW Working parameters Throughput capacity: 6 - 15 m³/h Discharge dry matter content: up to approx. 25 % dry matter Capacity/h: 0.4 - 0.5 t TS /h Dimensions (trailer with body) Body length: 8.000 m Bms3Zpoibxc Loading width: 2.420 m Interior height: 2.500 m Mass: 12.00 t (total weight of trailer with body)

Condition: used, Completely overhauled screen belt sludge press for sale. Screen belts, hydraulic hoses and plastic wear parts new. Mc7Xc38F9X

Year of construction: 2024, Condition: new, Our belt presses are equipped with two large pressing rollers, which means that the pressing process takes longer and the machine is pressed more gently. The result is high quality juice that is free of turbidity and foam. Pneumatic belt tensioning and automatic belt control ensure higher quality. The belt press is equipped with an automatic brush cleaning system. You do not need a high-pressure cleaner for belt cleaning, as the belt is cleaned with six special water nozzles. All you need is a compressor with a pressure capacity of 8 bar and a ½" water connection for cleaning. Thanks to the special nozzles, you use less water and have lower operating costs. The open system ensures quick cleaning. The system can be cleaned within a few minutes. Technical data: - Nominal capacity: 950 kg/h - Power requirement: 1 kW, 230 V, 16 A - Material: Wnr. 1.4301, AISI 304 stainless steel - Compressed air requirement: 50 L/h 6 bar - IP65 electronic control cabinet - Juice yield: Up to 75% - Fully automatic and infinitely variable regulation of the belt speed - User-friendly - Easy to clean - Rollable machine feet Dimensions Length: 2230mm Width: 1450mm Height: 1250mm Height of intake: 1240mm Height pomace ejector: 500mm Dpct32 Height juice outlet: 370mm Weight: 540 kg

Year of construction: 2020, Condition: new, Single Belt Press PT-400 The pulped mash is conveyed via the washing-pulping mill into the press in-feed hopper. The pulp is distributed across the main pressing roller and between the belt to start the initial juice extraction. This pulp will be progressively squeezed to the maximum over a series of additional rollers and mash deflector blades in order to achieve an optimum juice yield of up to 75%. At the exit of the press, the pomace is automatically scraped from the belt. CAPACITY 500 kg apples/h VOLTAGE 1x230 V POWER 0,8 kW Cmbgemje WATER CONSUMPTION up to 4 l/min BELT WIDTH 400MM

Year of construction: 2024, Condition: new, Functionality: fully functional, With stainless steel square tube frame 15 pressing rollers 2 press nipps Electrical powerd with stepless speed regulation Belt width 1500mm High pressure belt cleaning integrated Djiyrrb Nominal capacity up to 15.000 kg/h (depending on fruits & operating condition)

Year of construction: 2022, Condition: excellent (used), Functionality: fully functional, Long pre-pressing zone offers a gentle pressing process and the best juice quality; maximum pressing performance with minimum space requirement Blcr3Yge7Fm TECHNICAL DETAILS Drive: electric with infinitely variable speed control Rollers: 1 main pressing roller and 7 pressing rollers Belt width: 750 mm Capacity: up to 3250 kg/h (depending on type of fruit, degree of ripeness and working conditions) Yield: up to 80% (depending on the type of fruit and degree of ripeness) Power supply: 3x400V, 50 Hz, 16A Incl. control panel on stand, with stainless steel control cabinet EQUIPMENT Incl. control panel on stand, with stainless steel control cabinet with stainless steel tubular frame Tubs, juice guide plates and dosing box can be removed without tools Integrated high-pressure belt cleaning Brush cleaning for upper and lower belt belt tension and belt regulation pneumatically and infinitely adjustable generously dimensioned feed hopper with fill level monitoring Kreuzmayr KWEM 3000 washing-grinding system, built in 2022, can be purchased as an option at a fixed price of €14,000 The air bubbles generated by the blower ensure intensive cleaning of the fruit. Capacity: up to 3000kg/h Dimensions LxWxH: 3790x1020x2820mm Weight: approx. 575 kg Filling height of wash tank: approx. 1000mm Mash discharge height: 1670mm Electrical connection: 400V / 50Hz Motor inclined conveyor: 0,37kW Motor for grinder: 3kW Blower: 0,85kW Cleaning water circulation: 1,5kW With circulation pump for cleaning water Plastic conveyor belt with infinitely variable speed regulation Built-in control cabinet Waste water connection diameter 75mm Operating side: left in product flow direction Special version on wheels

Condition: new, Specifications: capacity up to 300 kg/h power: drive motor 0,37 (0,5) kW (PS) washing machine motor 0,12 (0,16) kW (PS) electric outlet 400V 50Hz (3 phases) fuse 16 A dimensions: length 1 280 mm width 870 mm height 1 350 mm insertion resp. discharge height 1 265 mm belt width 350 mm belt length 4 900 mm spread width 240 mm spread height (infinitely adjustable setting) 0 - 50 mm weight 350 kg material 1.4301 / AISI 304 juice yield bis zu 75 % belt speed 2 m/min contact time 1 min water consumption for cleaning 2 l/min connections: sewage connection Ø 48,3 mm juice discharge connection 1 “ B0T0Dovg juice discharge height 420 mm sewage discharge height 120 mm pomace discharge height 700 mm suitable for pomaceous and stone fruit

Year of construction: 2024, Condition: new, Our belt presses are equipped with two large pressing rollers, which means that the pressing process takes longer and the machine is pressed more gently. The result is high quality juice that is free of turbidity and foam. Pneumatic belt tensioning and automatic belt control ensure higher quality. The belt press is equipped with an automatic brush cleaning system. You do not need a high-pressure cleaner for belt cleaning, as the belt is cleaned with six special water nozzles. All you need is a compressor with a pressure capacity of 8 bar and a ½" water connection for cleaning. Thanks to the special nozzles, you use less water and have lower operating costs. The open system ensures quick cleaning. The system can be cleaned within a few minutes. Technical data: - Nominal capacity: 650 kg/h - Power requirement: 1 kW, 230 V, 16 A - Material: Wnr. 1.4301, AISI 304 stainless steel - Compressed air requirement: 50 L/h 6 bar - IP65 electronic control cabinet - Juice yield: Up to 75% - Fully automatic and infinitely variable regulation of the belt speed Bloeip888O - User-friendly - Easy to clean - Rollable machine feet Dimensions Length: 2230mm Width: 1250mm Height: 1250mm Height of intake: 1240mm Height pomace ejector: 500mm Height juice outlet: 370mm Weight: 480kg

Year of construction: 2020, Condition: new, Nominal capacity 3000kg/h (depending on fruits & operating condition, up to 6000kg/h) Yield up to 75% Belt width/length: 1000mm/approx. 7000mm Working width/high: 900mm/0-50mm continuously Belt speed continuously variable 1,0-5,2m/min Electrical supply: Drive motor 2,2 kW 400V Washing motor: 0,25 kW 400V Waterconsumption for belt cleaning: Approx. 3 l/operating minute Weight approx. 2300kg Dimensions: (lxwxh) 2750x1890x1690mm Thn7Zdos without high-pressure cleaner and without compressor

Condition: new, capacity: up to 3 000 kg/h electric outlet: 3,5kW 400V 50Hz (3 phases) fuse 16 A dimensions: length: 3 720 mm width: 1 730 mm height: 2 110 mm insertion resp. discharge height: 1 430 mm belt width: 660 mm D8Fi9G9 spread width: 220 - 440 mm spread height (infinitely adjustable setting): 10 - 40 mm weight: 2 200 kg material: 1.4301 / AISI 304 juice yield : up to 80 % belt Speed: 1,2 – 4,5 m/min contact time: 1,4 – 4,2 min water consumption for cleaning: 10 l/min connections: sewage connection: Ø 75 mm juice discharge connection: DN 25 juice discharge height: 130 mm sewage discharge height: 50 mm pomace discharge height: 810 mm suitable for pomaceous and stone fruit scope of delivery: high-pressure cleaner, compressor