Used Frequency Dryer for sale (6,818)

Condition: used, Year of construction: 2007, with light barriers in the inlet area, the dryer only switches on when parts are detected by the light barrier, otherwise the dryer is in energy-savingstandby mode with almost closed mirror halves. Operation via a Siemens panel. - Manufacturer: Venjakob - Type: VEN DRY UV 3D - Year of manufacture: 2007 - Operating side: right - Working width: 1.300mm - Max. Part height: approx. 100mm - Number of tubes: 2 pieces Hsdpfxezv Tche Ahajt - Suitable for mercury and gallium tubes - 3D for edge drying - Tube power max. 120W/cm - Tube power infinitely adjustable 50-120Watt/cm - With standby mode- With belt conveyor - Feed rate: ~ 2.5 - 7.5m/min. - Length: 3,000mm - Bretie: 2.750mm - Total connection ~45KW - Location: in stock - Volt/HZ: 400/50

Condition: used, Year of construction: 2013, - Manufacturer Venjakob - Type VEN DRY OIR 38/40 - Year of construction 2013 Hsdpfx Ahszv Tb Rsaot - Working width 1,300 mm - Working height 940 + - 20 mm - Length of exhaust duct 3,800 mm - Supply air capacity 100 m³/h - Exhaust air capacity ~ 500- 1000 m³/h - Recirculated air capacity ~ 3,000 m³/h - Max. Drying temperature ~ 30 degrees - Air velocity 0.5 - 2 m/s - IR emitters 12 pcs. - IR heater output 12 x 1.5 kW - Belt conveyor, length 4.000 mm - Location, at the warehouse - El. Power 20KW / 63A - Volt, Hz 400/50 - Voltage fluctuations max. +/- 5 % - Control cabinet with touch screen display

Condition: ready for operation (used), Year of construction: 2016, Brand: HAKO Model: Scrubmaster B650 Year of manufacture: 2016 Capacity: 3200 m²/h Scrubbing width: 65 cm Hjdpfx Aozwliijhaot Drive: 24V Clean water tank: 72L Dirty water tank: 74L Internal charger, 220 volts.

Condition: new, Year of construction: 2026, operating hours: 1 h, functionality: fully functional, total length: 1,800 mm, sweeping width: 1,060 mm, empty load weight: 477 kg, fuel type: electric, construction height: 1,350 mm, drive type: Elektro, construction width: 1,150 mm, Scrubbing and suction machine Condition: New Technical condition: New Front tire type: Non-marking Rear tire type: Non-marking Battery voltage: 36V Battery capacity: 200Ah Battery manufacturer: Noblelift Battery type: Waterless Hjdpjzv Aaiofx Ahast Battery year of manufacture: 2026 Description: In addition to this machine, we offer other forklifts and warehouse equipment. Our equipment is workshop-tested and meets FEM4.004 standards. Please contact us by email or by phone. You can also find us at hsr-gabelstapler. We also purchase your used equipment, even if you do not purchase a vehicle from us. Lease purchase and financing options are available on request at favorable terms. We would be happy to provide you with competent and detailed advice on our vehicles.

Condition: used, functionality: fully functional, machine/vehicle number: U00188, Year of construction: 2015, operating hours: 1,334 h, construction height: 2,170 mm, empty load weight: 2,750 kg, total length: 2,370 mm, construction width: 1,450 mm, sweeping width: 1,450 mm, Wet scrubber machines Chassis number: U00188 Condition: Ready for use and fully functional Technical condition: Very good Front tire type: Solid rubber Rear tire type: Solid rubber Hsdpfszqhh Iex Ahast Battery voltage: 36V Battery Ah: 930Ah Battery type: PzS Battery year of manufacture: 2015 Battery condition: 60 - 80% Description: German Tennant T17 No.: R0800 Year of manufacture: 2015 Operating hours: 1,334 Chassis number: U00188 Working width: 1,450 mm Overall height: 2,170 mm Length: 2,370 mm Overall width: 1,450 mm Weight: 2,750 kg Battery: 36 V / 930 Ah, PzS, year 2015 Battery condition: 60–80 % Tires: Solid rubber, single tires front and rear Condition: Ready for use and fully functional Visual condition: Very good Technical condition: Very good Location: Düsseldorf Availability: Immediate Charger: Not included Fast and uncomplicated transport can be arranged upon request! This advertisement is intended solely for the identification of the machine. A detailed description of its condition and possible equipment is available individually upon request. Errors and prior sale reserved. Sale exclusively to commercial customers. All used equipment is sold without warranty or guarantee. If you have not found the right machine, please contact us. We have a large selection of additional equipment available on site. English Tennant T17 No.: R0800 Year of manufacture: 2015 Operating hours: 1,334 Serial number: U00188 Working width: 1,450 mm Overall height: 2,170 mm Length: 2,370 mm Overall width: 1,450 mm Weight: 2,750 kg Battery: 36 V / 930 Ah, PzS, year 2015 Battery condition: 60–80% Tires: Solid rubber, single tires at the front and rear Condition: Ready for use and fully functional Visual condition: Very good Technical condition: Very good Location: Düsseldorf Availability: Immediately Charger: Not included Fast and uncomplicated transport can be arranged upon request! This advertisement is intended solely for the identification of the machine. A detailed description of its condition and possible equipment is available individually upon request. Errors and prior sale reserved. Sale exclusively to commercial customers. All used equipment is sold without warranty or guarantee. Should you not have found the right machine, please contact us. We have a large selection of additional equipment available on site.

Condition: excellent (used), Year of construction: 2002, Ultrafilter LP 0072 Compressed Air Treatment Dryer Industrial adsorption dryer and CO₂ purifier from premium manufacturer Ultrafilter (Donaldson) This unit was specifically designed for applications requiring ultra-high-purity compressed air—ideal for operating laser cutting systems, as well as for use in the pharmaceutical, food, and electronics manufacturing industries. Using a 5-stage process, the system not only removes moisture but also highly efficiently purifies the compressed air of oil vapors, particles, and carbon dioxide (CO₂). Technical specifications at a glance: - Manufacturer: Ultrafilter (Donaldson) - Model: LP 0072 - Power supply: 230 V / 50 Hz - Medium: Compressed air - Volume flow (at 5.5 bar g): Inlet approx. 36.3 m³/h | Outlet min. 13.5 m³/h - Operating pressure: min. 5.5 bar g | max. 16 bar g - Temperature range (medium/ambient): max. 40°C - CO₂ purification: Inlet max. 1000 ppm → Outlet max. 100 ppm - Vessel test pressure: 20.8 bar - Year of manufacture: 2002 Hodozwmacjpfx Ahajt Dimensions: (H x W x D) 2000 x 600 x 800 mm We would be happy to offer you suitable bank financing for your project. komplett-konzept.leasingo.de You can find more items—both new and used—in our shop! International shipping costs available upon request!

Condition: excellent (used), Year of construction: 2004, Ultrafilter LP 0072 Compressed Air Treatment Dryer Industrial adsorption dryer and CO₂ purifier from premium manufacturer Ultrafilter (Donaldson) This unit was specifically developed for applications requiring ultra-high-purity compressed air—ideal for operating laser cutting systems, as well as for use in the pharmaceutical, food processing, and electronics manufacturing industries. Using a 5-stage process, the system not only removes moisture but also highly efficiently purifies the compressed air of oil vapors, particles, and carbon dioxide (CO₂). Technical specifications at a glance: - Manufacturer: Ultrafilter (Donaldson) - Model: LP 0072 - Power supply: 230 V / 50 Hz - Medium: Compressed air - Volume flow (at 5.5 bar g): Inlet approx. 36.3 m³/h | Outlet min. 13.5 m³/h - Operating pressure: min. 5.5 bar g | max. 16 bar g - Temperature range (medium/ambient): max. 40°C - CO₂ purification: Inlet max. 1000 ppm → Outlet max. 100 ppm - Vessel test pressure: 20.8 bar - Year of manufacture: 2004 Dimensions: (H x W x D) 2000 x 600 x 800 mm We would be happy to offer you suitable bank financing for your project. komplett-konzept.leasingo.de Hodpfozwl Rgex Ahaot You can find more items—both new and used—in our shop! International shipping costs available upon request!

Condition: excellent (used), Year of construction: 1998, Ultrafilter Laserpac LP ​​0072 Compressed Air Treatment Dryer Industrial adsorption dryer and CO₂ purifier from premium manufacturer Ultrafilter (Donaldson) This unit was specifically developed for applications requiring ultra-high-purity compressed air—ideal for operating laser cutting systems, as well as for use in the pharmaceutical, food, and electronics manufacturing industries. Using a 5-stage process, the system not only removes moisture but also highly efficiently purifies the compressed air of oil vapors, particles, and carbon dioxide (CO₂). Technical specifications at a glance: - Manufacturer: Ultrafilter (Donaldson) - Model: LP 0072 - Power supply: 230 V / 50 Hz - Medium: Compressed air - Volume flow (at 5.5 bar g): Inlet approx. 36.3 m³/h | Outlet min. 13.5 m³/h - Operating pressure: min. 5.5 bar g | max. 16 bar g - Temperature range (medium/ambient): max. 40°C - CO₂ purification: Inlet max. 1000 ppm → Outlet max. 100 ppm - Vessel test pressure: 20.8 bar - Year of manufacture: 1998 Dimensions: (H x W x D) 2000 x 600 x 800 mm We would be happy to offer you suitable bank financing for your project. komplett-konzept.leasingo.de You can find more items—both new and used—in our shop! Hodpjzwl Hzofx Ahajt International shipping costs available upon request!

Condition: good (used), Frequency converter, frequency converter, drive inverter, controller, variable speed drive, servo controller, control, converter, PLC control, supply unit, inverter, servo drive, drive controller Hjdpfspcmt Esx Ahajt -Manufacturer: Nord, NORDAC frequency converter -Type: SK500E-111-340-A -Power: 1.1 kW -Input: 3AC 380/460V 47/63Hz -Output: 3 AC 0-Input V 0-400 Hz -Control Box: SK TU3-CTR -Dimension: 270/70/H160 mm -Weight: 1.7 kg

Year of construction: 2018, condition: used, Compressor with refrigerant dryer Manufacturer: Boge Type: S 111-4 Year of manufacture: 2018 Technical data - Volume flow: 17.10 m³/min - Final compression pressure: 10 bar - Motor speed: 1490 min-1 - Motor power: 110 + 3 kW Refrigerant dryer Manufacturer: Boge Type: DS220 Year of manufacture: 2017 Hodpfx Aezu Alvjhaot Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Forming area max. (length,width) / mm max. depth of product positive / mm max. depth of product negative / mm Technical specifications: Roll diameter approx. 420mm Projection in width approx. 415mm Projection in height approx. 265mm Table size approx. 605 x 600 mm Belt speed 18 - 562 m/min. 8 levels Saw band length min./max. 3150 / 3260mm - Saw band speed over 4 gear stages and 2 engine speeds - Saw blade butt welder IDEAL BS 0-16 with scissors and whetstone - swiveling work table in 2 axes Dimensions: approx. L x W x H 950 mm x 750 mm x 1900 mm Weight 600kg with table feed Hedpfx Aewgi Sijhaot Description has been adopted.

Condition: good (used), Year of construction: 2018, Recycling technology, agglomerator, high-performance mechanical dryer, dry cleaner, plastic recycling machine, drying system -Handover: in its current condition as inspected -Condition/Scope of delivery: untested, as shown in the pictures -Manufacturer: WIPA, Dry Cleaner Mechanical High-Performance Dryer Hjdpfeztndujx Ahajt -Type: MD 1250-3000/90/0.75/3R -Drive motor: 90 kW -Drum length: 1800 mm -Sieve: Perforation Ø 5 mm -Dimensions: Dryer 4475/2140/H2630 mm / Control cabinet 1200/660/H2195 mm -Weight: 8400 kg / 340 kg

Condition: used, Year of construction: 2002, UV dryer, Cefla UV 2000 - Manufacturer Cefla/Sorbini Hjdpfx Aeyifwpjhajt - Type UV 2000 M2 / TN3000 - Year of manufacture 2003 - Working width 1.300 mm (1.445) mm - Working height 900 + - 40 mm - Operating side right - Max. part height 70 mm - Number of tubes from above 2 pcs. - diagonally positioned tubes 2 pcs. - Suitable for mercury tubes - Suitable for gallium tubes - Tube power max. 120 W/cm - with belt transport - Length 3.000 mm - Width 2.300 mm - Height 1.500 mm - Volts, Hz 400 /50 - Total electrical connection 86 A / 36.4 kW - Voltage fluctuations max. +/- 5%

Condition: new, Kaeser membrane dryer KMM 5 Volume flow with pressure dew point reduction +35 °C -> +3 °C 0.68 m³/min Volume flow with pressure dew point reduction +35 °C -> -20 °C 0.4 m³/min Volume flow with pressure dew point reduction +5 °C -> -20 °C 0.67 m³/min Purge air 0.1 m³/min Compressed air connection R ¾ Min. overpressure 4 bar Max. Overpressure 14 bar Compressed air inlet temperature min. +1° C Compressed air inlet temperature max. +66° C Width 133 mm Depth 133 mm Height 634 mm Mass 5.9 kg Purge air stop valve Yes Membrane fiber in helix structure Yes Outlet silencer Yes Membrane flow from inside to outside Yes From stock We are on vacation until 06.01. Your request will be processed afterwards. Warranty and returns are excluded from this advertisement. Hjdovkf Aaepfx Ahast

Condition: used, Year of construction: 2019, Format: 2000 x 950 mm Equipment: Electric Modular Dryer Forced Hot Air System Hedpfxeyzruio Ahajt dimension 3800 x 1250 x 2170 mm POWER 15 kW 27 A weight 650 KG

Condition: good (used), Year of construction: 2011, Refrigerant dryer Manufacturer: Atlas Copco Type: FD150 Year of manufacture: 2011 Hodszvqwcspfx Ahaet Power: 1 kW Volumetric flow rate: 9 m³/min

Condition: good (used), Year of construction: 1999, Brand: Werner Koch Technik GmbH Item number: Sm Heyuydwsqvjka Model: CKT 110 Hsdozuk T Ispfx Ahaot Year of manufacture: 1999 Dry air capacity: 110 m³/h Tank volume: 400 L The dryer has recently been tested and is fully functional.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, total length: 69,000 mm, total width: 16,000 mm, total height: 16,000 mm, The system was designed according to Eurocode EN 1993 for the industrial drying of wood chips, sawdust, or similar biomass products and is suitable for use in biomass, wood, or pellet production. Process components: Air heater, deflection rollers, feed modules, discharge modules, trough chain conveyor, belt tensioning and adjustment device, 7 exhaust stacks (height up to approx. 17.6 m) Designed for hot air or waste heat utilization (e.g., biomass boiler or CHP plant), heat requirement 10,270 kW th, installed electrical power 690 kW el. The inlet temperature in the dryer is 68°C, the outlet temperature is 42°C, and the heat transfer medium is a water/glycol mixture. The volume flow at the dryer outlet is 1,081,000 m³/h. Dust emission value 5 mg/Nm³ (moist), sound pressure at a distance of 1 m 85 dB(A) from the opening of the exhaust duct and the dryer. The dryer is designed for an outside temperature down to -40°C, the conveying capacity is at least 70 m³/h and a maximum of 250 m³/h with a bulk density of 260 kg/m³. Hodpfx Ajzw Apgohast The working platform of the dryer is located on approximately 8.00 m high steel supports and is enclosed with thermally insulating sandwich panels. A hall or other production components can be inserted under and between the supports (see under Documents, Steel Structure). The system has been disassembled and stored by an experienced assembly team, and this team can be arranged for transport and reassembly. Please note: We are selling exclusively this belt dryer and no other parts! Please direct your inquiries via WhatsApp to Mr. Sörgel; he is on-site at the factory and may not always be available by phone. Thank you very much!

Condition: good (used), Forklift battery charger, industrial charger, forklift battery charger, industrial charger, charger for scrubber dryer -Manufacturer: Gansow, charger for scrubber-dryer -Type: E 24/24 DIGI-CONTROL Hjdpfxszrlyds Ahajt -Input voltage: 230 V 50 Hz -Power: 24 V / 24 A -Dimensions: 340/250/H225 mm -Weight: 12.1 kg

Condition: used, Year of construction: 2018, functionality: fully functional, The dry air dryer from Digicolor is for sale. This granulate dryer operates according to the principle of dry air drying. 40 liters Small footprint Hedpfxeywh E As Ahast Simple adjustment and operation Constant dew point of the dry air Optimization of all drying parameters Energy-efficient drying technology No compressed air or cooling water required Dust-free dry air thanks to adsorption rotor technology Anti-stress function, SmartMode, prevents over-drying of the plastic granulate.

Condition: used, Year of construction: 2006, functionality: fully functional, The desiccant air dryer, model Card 40 S, from Ferratech is for sale. Hsdszvulqopfx Ahaot Heating capacity: 1.1 kW Volume: 40 liters

Condition: excellent (used), Year of construction: 2018, operating hours: 82,618 h, functionality: fully functional, Used Kaeser TF230 refrigerant dryer Hodozwf Tzjpfx Ahaot 23 m3/min 16 bar Year of manufacture: 2018

Condition: excellent (used), Year of construction: 2021, Used clean air dust collector with frequency converter Year of manufacture: 2021 Max. volume flow up to 10,000 m³/h at the fan Approx. 73 m² filter area Pre-separator as standard 71 dB (A) at full load (according to DIN EN ISO 11201) Certified according to GS-HO-07 H3 residual dust content of 0.1 mg/m³ safely maintained (wood dust) Models with type-tested rotary valve airlock (FSA) Tested backflow flap Integrated automatic extinguishing system 350+ P Suction nozzle 355 mm Motor rated power 15.0 kW / 3-phase Voltage 400 V / 50 Hz Max. volume flow 10,000 m³/h Rated volume flow* 7,127 m³/h Negative pressure at Vnenn. 3,347 Pa Filter area 73 m² Chip collection volume (net / gross) 3 x 165 L / 3 x 241 L Sound pressure level 72 dB (A) Dimensions (L/W/H) in mm 3,112 x 1,058 x 2,361 Weight 1,074 kg Hodpfx Ajzizz Sshast Location: in stock at warehouse 54634 Bitburg - immediately available -

Condition: refurbished (used), 3 Zweifel desiccant dryers for plastic granules – in very good condition For sale are 3 desiccant dryers from Zweifel for plastic granules. The units are in very good condition and can be used directly as desiccant dryers. Alternatively, they can also be mounted on a separate frame. Price: Unit price: €600 per unit Total price for all 3 units: €1,500 Ideal for plastic processing, injection molding, or similar applications. Hodpfx Ajzw Uirshajt If you are interested or have any questions, please do not hesitate to contact me. Inspection is possible by arrangement.

Condition: like new (used), functionality: fully functional, input voltage: 380 V, input current: 105 A, input frequency: 50 Hz, continuous power: 55 kW (74.78 HP), Complete designation: NXP01055-A2H1SSS-A1A300000 Hsdezuzrujpfx Ahaet +QGLM+FL23*DPAP+DLDE Input: Uin: 3~380-500V, 50/60Hz, 105A, 40°C Output: 3~0-UIn, 0-320Hz, 105A, 40°C Power: 55kW: 400Vac / 90HP (Ref.): 480Vac Complete documentation included This frequency inverter comes from a warehouse clearance and has never been put into operation.