Used Friction for sale (248)

Condition: reconditioned (used), used spiral mixer Eberhardt Maximat MAAN 160, with 1 movable stainless steel bowl, one more bowl available for €3,000, completely overhauled, 160 kg dough, 2 timers, stainless steel spiral, many new parts, new friction wheel, new lifting cylinder, electrics renewed, 380/400 V, 3 phases, 50 Hz, 19.5 A, spiral 7.8 kW, bowl 0.75 kW Kdsdpji Hcdhofx Abvji

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 1,583 h, load capacity: 2,500 kg, fuel type: electric, drive type: Elektro, Low lift pallet truck Load center: 600 Technical condition: very good Battery voltage: 252V Battery year: 24 Battery condition: 80 - 100% Description: Prices are subject to change, ex stock, plus freight and VAT. No warranty/guarantee and no returns. Inspection by appointment possible. Our general terms and conditions apply. Lift height suitable for pallet handling, adjustable tiller head, fixed side protection walls, transistor control 12.5 km/h, creep speed, power steering, PIN code, load protection grid, E-bar, writing console, small item holder, tandem Vulkollan fork rollers, drive wheel Friction, support wheel Vulkollan, medium battery compartment for lithium. Kdsdpfsu D Sv Dex Abvoi

Condition: used, functionality: fully functional, Year of construction: 2020, operating hours: 122 h, load capacity: 1,400 kg, lifting height: 4,755 mm, free lift: 1,724 mm, fuel type: electric, mast type: triplex, construction height: 2,195 mm, fork length: 1,150 mm, drive type: Elektro, High Lift Truck Load Center of Gravity: 600 Mast Type: Triplex Condition: Reconditioned without warranty Technical Condition: Very Good Battery Voltage: 24V Battery Ah: 225Ah Description: Prices are subject to change, ex warehouse, plus freight and VAT. No warranty/guarantee, and no returns. Inspection possible by appointment. Our terms and conditions apply. Kedpfx Abswacv Ievjdi Pedestrian, including Sensilift and creep speed, standard hydraulics, Plexiglas finger guard, horn, tandem premium fork rollers, friction drive wheel, premium support wheel, PIN code, medium battery compartment with plastic battery compartment cover

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 246 h, load capacity: 1,450 kg, lifting height: 4,800 mm, free lift: 1,694 mm, fuel type: electric, mast type: triplex, construction height: 2,162 mm, fork length: 1,150 mm, drive type: Elektro, High lift truck Load center: 600 Mast type: Triplex Technical condition: very good Battery Volt: 24V Battery Ah: 210Ah Battery manufacturer: Toyota Kedpeu D Sx Sofx Abvedi Battery year of construction: 2018 Battery condition: 80 - 100% Description: Prices are subject to change, ex stock, plus freight and VAT. no warranty/guarantee and no return. Viewing possible by arrangement. Our general terms and conditions apply. 6km/h, hydraulics standard, PIN code drive Friction, support wheel Vulkolan, fork rollers Tandem E-bar, writing console, small item holder with creep speed Drive unit for increased residual load capacity Finger protection grille, without protection bar Lithium-ion

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 4,208 h, load capacity: 1,200 kg, lifting height: 4,150 mm, free lift: 1,554 mm, fuel type: electric, mast type: triplex, construction height: 1,979 mm, fork length: 1,150 mm, drive type: Elektro, High-lift truck Load center: 600 Mast type: Triplex Condition: Refurbished without warranty Technical condition: good Battery voltage: 24V Kdjdpown Rfajfx Abvsi Battery type: PzS Description: Prices are subject to change, ex stock, plus freight and VAT. No warranty/guarantee and no return. Inspection possible by arrangement. Our terms and conditions apply. Pedestrian tiller, Standard tiller head, PIN code, Finger protection grid, Fork rollers: tandem polyurethane, Drive wheel: friction, Support wheel: vulkollan, Medium battery compartment with plastic cover Special equipment: Under-ride protection extension

Condition: new, Year of construction: 2025, Fully automatic High-speed Sideshrink Machine. Continuous motion sealing machine with moving sealing unit for reliable and trouble free packaging. PRO-Version including external finger chain infeed conveyor system and friction feeder. Touchscreen panel for user friendly operation. No-product-automatic-stop-system. Easy and fast changeover of formats. Less film wastage reduces film costs. Ideal in combination with the AMTEC SHRINKtunnel POF-L (High-Speed) PRO-Version. Can be combined with POF-PE-Shrink Tunnel. - Specifications: max. speed of the machine in neutral: 120 cycles/minute; max. packaging size: L(80-1000)xW(100-500)xH(5-180) mm; sealing blade length: 630mm; 220V, 6.5kW, 6bar, 0.6m³; machine dimensions: L6350xW1950xH1380 mm. Kedpfjv Nl Hvex Abvedi Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: new, Year of construction: 2025, Fully automatic continuous side sealer for fast and reliable product flow due to continuous motion sealing unit. PRO-Version including external finger chain infeed conveyor system and friction feeder. Touchscreen panel for user friendly operation. No-product-automatic-stop-system. Easy and fast changeover of formats. Less film wastage reduces film costs. Ideal in combination with the AMTEC SHRINKtunnel POF-L (High-Speed) PRO-Version. Can be combined with POF-PE-Shrink Tunnel. - Specifications: max. speed of the machine in neutral: 70 cycles/minute; max. packaging size: L(80-700)xW(80-380)xH(5-180) mm; sealing blade length: 530mm; 220V, 6.5kW, 6bar, 0.6m³; machine dimensions: L4755xW1660xH1370 mm. Kodjv Nl Hispfx Abvodi Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: new, Year of construction: 2025, Fully automatic High-speed Sideshrink Machine. Continuous motion sealing machine with moving sealing unit for reliable and trouble free packaging. PRO-Version including external finger chain infeed conveyor system and friction feeder. Touchscreen panel for user friendly operation. No-product-automatic-stop-system. Easy and fast changeover of formats. Less film wastage reduces film costs. Ideal in combination with the AMTEC SHRINKtunnel POF-L (High-Speed) PRO-Version. Can be combined with POF-PE-Shrink Tunnel. - Specifications: max. speed of the machine in neutral: 120 cycles/minute; max. packaging size: L(80-1000)xW(80-400)xH(5-180) mm; sealing blade length: 500mm; 220V, 6.5kW, 6bar, 0.6m³; machine dimensions: L5405xW1780xH1380 mm. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty. Kdsdjv Nl Hpepfx Abvoi

Condition: good (used), Year of construction: 2007, DADAUX SLICO 700 Cutlet Slicer • Control panel protected with a cover against water ingress. • Textured loading surface prevents excessive friction of products intended for cutting. • Fully constructed from INOX 1810 Kdjdpfsxx Tbpex Abvsi • Hinged doors • 1 speed: 160 cuts/min • Adjustable cutting thickness from 0 to 40 mm • Electric feed system • Stepwise feed system • Cutting thickness adjustable during operation • Automatic pusher return • Suitable for high-pressure washing • CE compliant

Condition: used, Year of construction: 2018, Are you in search of a bridge type milling machine? With X-travels ranging from 2-15m, Y-travels up to 4m, and Z-travels up to 2m, we offer a versatile selection of machines to meet various machining requirements. Whether it's CNC universal heads, W-axis, rotary table, tool changer, or controls from renowned manufacturers such as Siemens, Fanuc, and Heidenhain, our extensive range of accessories allows for maximum flexibility and efficiency. Take a look at the PDF catalog below! Discover the ultimate precision and robustness of our refurbished CORREA portal milling machines, meticulously restored by our experts in Spain. These machines have been meticulously inspected and tested according to the highest standards, guaranteeing top-notch machining quality. An outstanding example is our used CNC portal milling machine VM 2018, equipped with the proven Heidenhain control. With impressive performance data and detailed technical features, this machine has everything you need for precise and efficient machining. x-travel: 2300 mm y-travel: 2000 mm z-travel: 1000 mm Table size: 2300 x 1600 mm T-slots (width x spacing x number): 8x 22 x 180 mm max. table load: 8 t Distance between columns: 1840 mm Distance between spindle nose and table: 180~1180 mm Spindle motor: 22/46 kW Spindle torque: 140.1/286.5 Nm (S6-25%) Spindle nose: 50 SK Spindle speed: 10000 (direct) rpm Rapid traverse X, Y: 20000 mm/min. Rapid traverse Z-axis: 15000 mm/min Milling feed range: 1~10000 mm/min Machine size (LxWxH): 7027 x 5217 x 4339 mm Total power requirement: 60 kVA Machine weight approx.: 25 t CNC control: Heidenhain TNC 620 Chip conveyor with chip container: 2 pcs spiral, 1 pc hinge belt Through-spindle coolant: 20 bar CE version: Certified by TUV Kedpfx Ajhx R Dksbvjdi Used CNC portal milling machine with HEIDENHAIN 620 TNC control and extensive accessories, featuring: - Monoblock cast iron machine bed and monoblock crossbeam provide highest rigidity for precise machining results. - The entire structure has been optimized for rigidity and precision through FEM analysis. - P-class feed roller linear guides allow maximum load capacity with a lower friction coefficient (0.003-0.006). They ensure smooth operation through optimized roller circulation and guidance, reducing energy consumption. - The double-nut C3 ball screws ensure precise milling even for heavy loads. - Spindle direct drive with 10,000 rpm and SK50 tool holder. - Spindle motor power 22/46 kW (S6-25%). (22 kW continuous power, 46 kW for 30 minutes overload) - Spindle torque corresponds to 140.1/286.5 (S6-25%) Nm - Two spiral conveyors and one chain chip conveyor effectively remove chips. All essential components are sourced from reputable manufacturers in Europe, ensuring reliable, short-term, and long-term availability of spare parts. Don't miss the opportunity to optimize your production processes and invest in high-quality milling technology. Experience the difference that our portal milling machines offer - reliable, durable, and ready to tackle your most demanding tasks. Contact us today and let our experts guide you.

Condition: used, Year of construction: 2018, travel distance X-axis: 2,300 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,000 mm, table length: 2,300 mm, table width: 1,600 mm, spindle speed (max.): 10,000 rpm, spindle nose: SK 50, Used CNC portal milling machine KRAFT VM-2018B with Heidenhain TNC 620 Year of manufacture: 2018 Storage location: Germany Delivery time: short term Payment: 100% before loading Warranty: none Machine description Kjdpowkg T Sefx Abvjdi The KRAFT VM-2018B is a precise and powerful CNC portal milling machine with HEIDENHAIN TNC 620 control, ideal for heavy-duty and high-precision machining processes. Thanks to its robust design and high-quality components, it is ideal for demanding milling tasks in tool and mold making as well as in series production. Highlights & features Monoblock cast iron bed and cross beam for maximum rigidity and precision FEM-optimized machine design BF gearbox with 26 kW motor for high torque (662 Nm) Feed roller linear guides P-class (very low coefficient of friction 0.003-0.006) C3 ball screws with double nut - high load capacity & accuracy Spindle: SK50, 10. 000 rpm, direct drive Heidenhain TNC 620 control Spindle cooling & IKZ 20 bar Coolant system, oil separator, air conditioning for control cabinet Full enclosure, TÜV-approved, CE-compliant Technical data Travel (X/Y/Z): 2,300 / 2,000 / 1,000 mm Table size: 2,300 × 1,600 mm T-slots: 8 × 22 × 180 mm Max. Table load: 8 t Distance spindle nose - table: 180-1,180 mm Rapid traverse X/Y: 20,000 mm/min Rapid traverse Z: 15,000 mm/min Feed range: 1-10,000 mm/min Positioning accuracy (VDI/DGQ3441): 0.020

Condition: new, Year of construction: 2022, functionality: fully functional, overall weight: 37 kg, hollow shaft diameter: 40 mm, 3 units available, price per unit! Speed [r/min]: 1415 / 19 Total gear ratio [i]: 72.98 / infinite Max torque Ma [Nm]: 600 Output torque [Nm]: 182 SEW service factor: 3.30 Mounting position IM: M6 Terminal box position [°]/cable entry: 270 (top) / standard Lubricant / quantity [l]: CLP 220 mineral oil / 2.40 Paint finish: Top coat RAL7031 - Blue grey Gearbox: FH57/G Hollow shaft: 40mm Design type: Hollow shaft with shrink disc Additional general features: G rubber buffer Documentation No. A: 26865343, 26883392 Kdodpewy Umrsfx Abvoi Parts list: 422511499 Motor: DRN71M4/BE05/IS/TF/AK8W Motor power [kW]: 0.37 Motor frequency [Hz]: 50 Duty cycle S1-S10: S1 Motor voltage [V] / connection type: 230/400 delta/star Rated current [A]: 1.78 / 1.02 cos phi: 0.66 Connector circuit diagram: R81 / 680790306 Thermal class [°C]/protection type [IP]: 155(F) / 54 International efficiency class: IE3 Efficiency at 50/75/100% rated load [%]: 74.3 / 77.3 / 77.3 CE marking: Yes IS version: Complete connector Primary connector: IS = integrated connector Primary connector, electrical interface: 6 winding ends customer side; 3-wire supply with swap terminal bridge Primary connector, code: 01IB Brake: BE05 Brake voltage [V]/torque [Nm]: 230 AC / 5 Brake rectifier: BMK1.5 Brake circuit diagram: B121 / 690090206 Fan hood: Metal fan cover Motor protection: TF = PTC thermistor Encoder: AK8W / shaft-centered, friction-locked mounting via tapered shaft Electrical interface: asynchronous, serial RS485 Incremental value: 2048 Absolute value: Singleturn 16 bit + multiturn 16 bit Encoder connection: Integrated encoder connector on encoder cover with terminal lid, no thermal motor monitoring, A1GA Encoder-IS position/cable entry: 270 (top) / standard Encoder version: Supply voltage DC 7-30V Encoder circuit diagram no.: 681810208 Encoder code 1: 03AA20AN60AC Technical data sheet encoder: 63297795 Terminal box lid: IS terminal box cover made of aluminum with threaded holes 1xM25, 1xM12, 1xM20 Documentation No. A: 25957066, 26857987, 26864274 Nameplate: German 1st nameplate set / position: 0° Nameplate language (2nd set): German 2nd nameplate set / position: Supplied loose in plastic bag Operating manual language/quantity: German / 0 Parts list/language/quantity: German / 0 Customs tariff number: 85015100

Condition: refurbished (used), functionality: fully functional, SL2 Autoloader with feeder for Buhrs (W+D) BB 700 inserting system Kodpfx Aewf Nv Sebvsdi Including integration kit for Buhrs (W+D) RF2 rotary feeder Including integration kit for Buhrs (W+D) HF2 friction feeder

Condition: used, Year of construction: 2021, functionality: fully functional, total height: 7,000 mm, total width: 4,750 mm, total length: 6,000 mm, pressing force: 1,000 t, reverse speed: 60 mm/s, The MV-1000E/NC-SINCRO hydraulic press is custom-designed for the adjustment of progressive dies. It features a tilting upper table and a movable lower table made of C45E steel, machined with DIN-650 T-slots to ensure minimal friction in the vertical movement of the upper table. This is achieved through the installation of maintenance-free bimetallic bushings and perfect parallelism ensured by four high-mechanical-resistance cylindrical columns of 300 mm in diameter, chrome-plated and rectified. STRUCTURE AND TABLES • Features a structure made from oxy-cut steel divided into three electro-welded monoblocks, exclusively manufactured from S355JR steel. • Stabilized and machined at the end of the welding process to ensure perfect parallelism and precision. • Calculated and designed with finite element software. • Cylindrical columns with a diameter of 300 mm, high mechanical resistance, rectified, and chrome-plated to maintain a low friction and wear coefficient. • Upper table with T-slots and anti-fall safety system. • Useful table surface: 4,750 x 2,250 mm. • Structure designed to support 600 TN of concentrated force on 1/3 of its surface. • Lower table designed to support up to 50 TN in displacement, supported by bronze guides with graphite load and mechanical positioning centers for precise table positioning. CYLINDER AND HYDRAULIC GROUP • 6 single-acting cylinders with lapped sleeves, chrome-plated pistons, and anti-wear guides. • Four 50 TN hydraulic compensators located at the ends of the lower table. • 800-liter hydraulic group with a silent Denison pump, automatic disconnection of the fast approach pre-filling speed, and equipped with a decompression system in working speed. • Proportional pressure system and optical gauges for displacement control on the upper table, with a synchro-electronic system for compensating off-center or unbalanced forces. • Hydraulic group cooling system with an independent air-oil radiator unit. • All M series hydraulic presses include a lateral pressure switch to adjust the most suitable pressure setting for each type of work. • Glycerin manometer with tonnage reading. ELECTRICAL INSTALLATION AND SAFETY • Includes a SIEMENS safety PLC model SIMATIC S7 1200 and a 12” touchscreen. Allows programming of semi-automatic and automatic operating modes, power, travel, and upper table dwell time. Capable of storing 300 recipes, with each recipe able to program all the above values. • Low voltage operation via two-hand pushbutton. • Anti-fall safety system with hydraulic safety jaws. • Level IV photoelectric barriers installed at the front and rear. • Lateral protections with opening and safety microswitches. TECHNICAL SPECIFICATIONS Kdodpfx Ajwpgwnebvji Power tn 125 - 1000 Opening Force tn 100 Powered Speeds 1 Engine Power kW 75 Fast Pre-Fill Speed mm/s 100 Variable Working Speed mm/s 12-4 Return Speed mm/s 60 Guide Diameter mm 300 Maximum Pressure Bar 290 Useful Table Area mm 4.750 x 2.200 Lower Table Displacement mm 2.200 Vertical Travel of Upper Table mm 800 Between Columns mm 5.000 x 1.490 Total Front mm 6.000 Total Side mm 4.750 Total Height mm 7.000 Weight kg 150.000

Condition: new, functionality: fully functional, machine/vehicle number: MV-250E/NC, pressing force: 250 t, table width: 2,500 mm, table length: 1,150 mm, Equipment: documentation/manual, safety light barrier, HYDRAULIC FOUR-COLUMN PRESS FOR DEEP DRAWING APPLICATIONS TECHNICAL DATA Press force / Main cylinder 250 t Blankholder force 50 t Motor power 11 kW Ram stroke 500 mm Approach speed 80 mm/s Working speed 7 mm/s Return speed 105 mm/s Column diameter 150 mm Maximum pressure 260 bar Usable table area 2,500 x 1,150 mm Column clearance 2,500 x 700 mm Maximum open height 1,000 mm Blankholder (cushion) size 950 x 750 mm Working height 1,100 mm Overall height 3,650 mm Weight 15,000 kg The hydraulic four-column press MV-250E/NC belongs to the M/NC series and is specially designed for high precision and capacity, particularly in deep drawing operations. Outfitted with upper and lower tables made from C45E steel, featuring DIN-650 T-slots to ensure minimal friction during vertical movement of the upper table. This is facilitated by maintenance-free bi-metal bushings and perfect parallelism by means of four chrome-plated and precision-ground cylindrical columns. The press features an optimized hydraulic system operating at pressures below 290 bar, ensuring long service life and reliable performance. It complies with all essential safety and health requirements in accordance with CE regulations. STRUCTURE AND TABLES • Consists of three fully welded blocks, manufactured exclusively from S355JR steel. • Stabilized and machined after welding to ensure perfect parallelism and precision. • Designed and calculated using finite element analysis software. • The lower table is equipped with a 50-ton hydraulic cushion, usable area 950 x 750 mm, and three front supports for tooling outside the press. • Integrated SIEMENS KTP-400 NC for controlling ram stroke, speed changes, and cushion control. • Includes a SIEMENS S7 PLC, permitting storage and programming of up to 99 settings. CYLINDER AND HYDRAULIC UNIT • Single-acting cylinder with honed sleeve, chrome-plated piston, and wear-resistant guides. • Complete hydraulic unit installed on the top of the press. Kjdewkuchspfx Abvedi • Hydraulic unit comprises a low-noise Denison hydraulic pump and an air-oil cooler. • Includes: - Decompression system - Solenoid operated pressure valves - Pre-fill valves - Communication valve - Check valve - Pressure relief valve - Safety catch valve ELECTRICAL INSTALLATION AND SAFETY • Features a SIEMENS SIMATIC S7 1200 safety PLC and a 4-inch KTP-400 touchscreen on the control panel. Enables programming of semi-automatic and automatic modes, power, stroke, and dwell time. Offers storage for up to 99 recipes; each recipe is fully programmable for the above parameters. • The electrical control panel features a selector switch for mode selection: manual “setup” or automatic “production” cycle. • Machine operation via electric low-voltage foot pedals. • Safety features include category IV light curtains in the front working area, two fixed side guards, and a rear safety guard with a magnetic interlock detector.

Condition: used, Year of construction: 2024, functionality: fully functional, total height: 2,675 mm, table height: 900 mm, total width: 1,075 mm, total length: 1,525 mm, pressing force: 100 t, table width: 700 mm, table length: 500 mm, overall weight: 2,540 kg, reverse speed: 60 mm/s, distance between side stands: 800 mm, stroke length: 250 mm, Equipment: safety light barrier, RIGID FRAME HYDRAULIC PRESSES We have engineered the motorized rigid frame hydraulic presses of the R/NC series in six different capacities ranging from 80 to 500 tons. Specially designed for stamping, die-cutting, and drawing operations. The latest generation R series hydraulic presses have evolved into highly versatile machines, including the capability to integrate seamlessly into automatic production lines. They operate at a hydraulic pressure below 320 BAR to ensure maximum durability of the entire hydraulic system. The R/NC series drawing and stamping presses feature an electro-welded frame made exclusively from S355JR steel, stabilized and precision-machined after welding for perfect parallelism and accuracy. The frame design and strength are optimized using finite element analysis software, ensuring our high standards of precision and quality are always maintained. Both the upper and lower tables are made from precision-machined C45E steel and feature DIN-650 T-slots. The upper table maintains perfect parallelism by means of four lateral cylindrical guides with maintenance-free, anti-friction bimetallic bushings. The double-acting cylinder features a lapped barrel, a chrome-plated piston, and maintenance-free wear guides. The hydraulic unit is motorized, offering two speeds with automatic disengagement of the rapid speed, and includes a cylinder decompression valve. Standard features include a SIEMENS SIMATIC S7 1200 safety PLC and a 4” MTP-400 touchscreen positioned above the electric foot pedal control. This setup allows for programming of semi-automatic and automatic operating modes, power, stroke, and dwell time of the upper cylinder. Up to 99 recipes can be stored, with full parameter settings for each recipe. The electrical control panel includes a selector switch for manual/automatic operation, and a key switch for maintenance tasks. All electric and hydraulic controls are redundant and self-monitored, with an additional safety block and safety self-monitoring features. The machine includes verification and certification of correct operation, as well as the safety distance of the light curtains. Safety features include type 4 PLe photoelectric light curtains at the front working area, two fixed side guards, and a rear access guard equipped with a magnetic disconnect sensor, polycarbonate windows, and LED interior lighting. Installation of a hydraulic cushion or ejector is supported. Compliant with all essential CE safety and health requirements. Supplied with an instruction manual. Technical Specifications: - Force: 100 t - Motor power: 13 kW - Working speed: 3–9 mm/s - Approach speed: 40 mm/s - Return speed: 60 mm/s Kdodpowlgkmsfx Abvji - Maximum pressure: 319 bar (up to 320 bar) - Ram stroke: 250 mm - Guide diameter: 50 mm - Lower table: 700×500 mm - Upper table: 600×450 mm - Max. vertical opening: 500 mm - Front opening: 800 mm - Working height: 900 mm - Overall front width: 1,525 mm - Overall length: 1,075 mm - Overall height: 2,675 mm - Weight: 2,540 kg

Condition: like new (used), functionality: fully functional, machine/vehicle number: MV-600E/NC, pressing force: 600 t, table width: 990 mm, table length: 890 mm, operating speed: 5 mm/s, overall weight: 23,000 kg, reverse speed: 18 mm/s, Equipment: documentation/manual, safety light barrier, The MV-600E/NC four-column hydraulic press belongs to the M/NC series and is custom-designed to achieve greater precision and capacity, specifically manufactured for stamping, deep drawing, punching, and deburring tasks. Power tn 600 Motor Power 40 HP a 440 Vca / 60hz Working Speed mm/s 5 Approach Speed mm/s 15 Return Speed mm/s 18 Piston Stroke mm 1.015 mm - (40”) Guide Diameter mm 200 Table Usable Area mm 990 x 890 x 130 (39” x 35” x 5”) Between Columns mm 990 x 370 Vertical Clearance mm 1.625 - (64”) Working Height mm 990 - (39”) Lower Hydraulic Knockout Tn 80 Lower Knockout Stroke mm 406.4 - (16”) Upper Hydraulic Knockout Tn 80 Upper Knockout Stroke mm 406.4 - (16”) Total Frontal mm 1.850 Total Lateral mm 1.700 Total Height mm 4.500 Weight Kg. 23.000 Kg. approx. Equipped with a top and bottom table made of C45E steel, machined with DIN-650 slots, and a removable upper counter-table of 990 x 890 x 130 mm for die holders with “T” slots. We ensure minimal friction in the vertical movement of the top table through the installation of maintenance-free bimetallic bushings, with perfect parallelism achieved by four chromed and ground cylindrical columns. Ksdjwpggispfx Abvodi It uses an optimized hydraulic system with a pressure of 320 Bar, ensuring prolonged durability and reliability in its performance. It meets and satisfies all essential safety and health requirements according to CE regulations. STRUCTURE AND TABLES • Consists of three electrowelded blocks made exclusively of S355JR steel. • Stabilized and machined at the end of the welding process to ensure perfect parallelism and precision. • Calculated and designed using finite element software. • Incorporates a SIEMENS SIMATIC S7 1200 PLC and a 7” HMI KTP-700 touch panel. This allows programming of the power, cylinder stroke, and speeds, with a storage capacity of 300 memories for different work cycles. CYLINDER AND HYDRAULIC GROUP • Double-acting cylinder with lapped sleeve, chromed piston, and maintenance-free anti-wear guides. • Motorized hydraulic group with two speeds and automatic disconnection of fast speed. High-pressure pump and 10-micron return filter. Includes cylinder decompression valve, directional valve, and safety valve. A pressure switch located on the side allows the most appropriate pressure setting for each type of work. • Glycerin manometer with reading in tons. ELECTRICAL INSTALLATION AND SAFETY • The electrical panel incorporates a selector to choose manual, semi-automatic, or automatic operation modes, and another selector for fast or slow speed operation. • Equipped with a PLC to internally assist with maneuvers and decompression time. • Operation is carried out using a low-voltage electric two-hand button panel. • Electrical and hydraulic maneuvers are redundant and self-controlled, incorporating an additional safety block and self-control devices for maneuvering and safety. Includes verification and certification of proper operation and safety distance for photocells. • For safety, category IV photoelectric barriers are incorporated in the front work area, two fixed side protections, and a movable protection with a magnetic disconnection detector at the rear. • Machine equipped with an IXON system for online communication in case of faults or reprogramming. • Ladder with upper walkway for repair access (scaffold).

Condition: new, Year of construction: 2026, functionality: fully functional, total height: 2,790 mm, total width: 1,950 mm, total length: 1,240 mm, throat depth: 375 mm, pressing force: 100 t, overall weight: 3,820 kg, reverse speed: 230 mm/s, ram plate width: 650 mm, ram plate length: 450 mm, working height: 850 mm, stroke length: 450 mm, pressure: 290 bar, Equipment: documentation/manual, safety light barrier, Model CF-100/VR + frequency converter, inverter system. We have designed the CF/VR series C-frame motorized hydraulic presses in a range of three different capacities, from 80 to 150 tonnes. Specifically engineered for medium to high volume production processes such as stamping, die-cutting, and deep drawing. The new generation of CF/VR hydraulic presses offers versatile applications, making it possible to integrate these machines into automated production lines. They operate at hydraulic pressures below 290 BAR to ensure increased longevity of the entire hydraulic system. STRUCTURE AND TABLES: The CF/VR series hydraulic C-frame presses feature an electro-welded frame made exclusively of S355JR steel, stabilized and machined after welding to ensure perfect parallelism and high precision. The structure is designed and calculated using finite element analysis (FEA) software, guaranteeing our high standards for precision and quality at all times. Each press is equipped with upper and lower tables made of machined C45E steel, featuring DIN 650 T-slots. The upper table maintains perfect parallelism via four 50 mm diameter lateral cylindrical guides with maintenance-free, anti-friction, bimetallic bushings. CYLINDER AND HYDRAULIC UNIT: The main cylinder is single-acting, with a lapped barrel, chrome-plated piston rod, and maintenance-free wear guides. For rapid approach and return movements, two double-acting lateral cylinders are fitted, also with lapped barrels, chrome-plated rods, and maintenance-free wear guides, enabling fast approach and return speeds. The motorized hydraulic unit includes a prefill valve for approach and return, and a fixed displacement pump for constant-speed operations. The assembly also features a check valve, pressure relief valve, cylinder decompression valve, and air-oil cooling system. ELECTRICAL INSTALLATION AND SAFETY: Standard equipment includes a SIEMENS SIMATRIC S7 1200 series PLC and a 7'' tilting touch screen panel (MPT-700 model), enabling programming of press force, cylinder stroke, and speeds, with storage for up to 300 programs. Kdsdpfewpg Uaox Abvei All electric and hydraulic controls are redundant and self-monitoring. An additional safety block and self-checking devices are installed for operational safety. Includes verification and certification of proper functionality and correct safety distances for photocell protection. Activation is via a low-voltage electric foot pedal. To guarantee safety, the presses feature type 4 PLe safety light curtains at the working area front, two fixed lateral safety guards with polycarbonate windows, and internal LED work lighting. Supplied with operator's manual. Fully complies with all essential health and safety requirements according to CE standards.

Year of construction: 2018, condition: refurbished (used), Flying cutoff unit TCC 120/168, made by OTO MILLS Recently revamped Complete flying cutoff unit including: - Accelerator (carriage transmission) - Main carriage motor - Cutoff unit TCC120 with base with linear guides, cutting head, clamping unit and support for tube at exit side - Control panel RENEWED - Electrical cabinet RENEWED - Hydraulic group - Cable chain - All existing documentation, manuals, drawings Specifications: - Type of saw : Friction - Material thickness : 1 –6 mm - Standard tube length : 3 –12 m - Diameter range : 42 –168 mm - Square tubes : 40x40 –130x130 - Rectangular tube : 50x30 –180x80 - Max. speed : 120 m/min - Length tolerance : +/-2 mm Round tube diameter: 42 – 168 mm Square tube diameter: 40×40 – 130×130 mm Rectangular tube diameter: 50×30 – 180×80 mm Material thickness: 1 – 6 mm Kdjdpfx Asvtpp Nsbvei Tube length: 3 – 12 m Type of saw: Friction Length tolerance: +/-2 mm Max. speed: 120 m/min

Condition: new, OMEC 3 rollers mechanical symmetrical double invitation rolling machine New "CE Made in Italy USEFUL IN WORK mm 2050 Kdodpfx Ajgyk S Aobvsi DIAMETER OF THE UPPER ROLLER mm 150 LOWER ROLLER DIAMETER mm 150 LATERAL ROLLER DIAMETER mm 150 MAX CALENDER THICKNESS 1,5 x D mm 4 MAX CALENDER THICKNESS 3 x D mm 4,5 MAX CALENDERING THICKNESS 5 x D mm 5 MACHINE DIMENSIONS : mm 920 x 3400 x 1100 TOTAL POWER INSTALLED : Kw 6,5 WEIGHT : KG 1700 The FX3-3 series distinguishes the mechanical asymmetrical 3 ROLLERS calenders with simple FULL INVENTORY. The side roller (bending roller), is assembled as standard with steel supports and bearings and on the outside bronze pads which guarantee maximum reliability and minimum friction. ensure maximum reliability and minimum friction over time. The rotation of the rollers is applied to the UPPER and LOWER rollers by means roller by means of reducer and self-braking motor, as well as the translations and the sheet metal clamping by means of motors and reducer of the best brands. reducer of the best brands. Equipped with roll hardening, motorized translation and clamping, prearrangement for mounting curved rollers and conical device conical device positioned directly in the upper roller, they are today the best compromise of absolute quality and easy easy to use by the operator for the most varied cylindrical and conical calendering processes. As standard, the upper roll is opened from the side in order to extract the rolled plate. MACHINE CONFIGURATION: MOTORIZED UPPER AND LOWER ROLL in rotation with equal power. [...]

Condition: used, Year of construction: 2023, 3-way unit Boundary spreading system Limiter V Pipe protection bracket L Mechanical / position indicator Spreader ZA-V hopper extension S 2000 Built-in parts for / ZA basic units PTO shaft with friction clutch Strainer L and ladders / LED lighting to the rear Kdodpfot Dwibex Abvei

Condition: used, Year of construction: 2023, Spreading disc set V-Set 1 3-way unit Boundary spreading unit Limiter V / pipe protection bracket S Rolling device pluggable Spreading unit ZA-V Hopper attachment S / 2000 PTO shaft with friction clutch Built-in parts for ZA basic units Mud flap S / LED lighting Kdjdot Dwh Rspfx Abvsi

Condition: used, Year of construction: 2023, Grimme Select 200 / . / K80 / Hydr. support foot / Hydr. drawbar / Plastic coulter plates / Adjustable center coulter / Rod depth adjustment from terminal / Terradisc / Hydr. coulter discs / Sieve channel width 1700mm / Pitch-independent friction drive Kodpetgtm Rofx Abvodi

Condition: used, Year of construction: 2022, Documentation in German Spr Type plate PTO shaft 910 mm with / friction clutch Container attachment L 3200 swivel mounted ex works Mud flaps L / and ladders LED lighting to the rear for road travel Roll-up tarpaulin L / with manual operation Kdjdpfxorxr R Ss Abvoi

Condition: used, Year of construction: 2024, Basic hopper / ZA-V Easy spreader unit / warning sign foiling / 910 mm PTO shaft / with friction clutch / S 1400 hopper extension, welded / factory-fitted / S mud flap / LED lighting to rear / Easy operating computer Kodpfxjuhp Ehe Abvedi