Used Friction for sale (255)

Condition: used, pressure 075 t throat 230 mm stroke 6 - 100 mm no. of strokes 105 /min distance table/ram, max. stroke up, adjustment up 354 mm table surface area 700 x 420 mm hole in the table 250 mm table height over floor 800 mm passage to the back 310 mm ram surface 264 x 270 mm ram adjustment 60 mm power requirement 5,5 kW Dedpfxsyx Iids Apwsut weight 3,6 t dimensions (WxDxH) 1,2 x 1,6 x 2,3 m permitted for manual put-in according to the German Safety Regulations (UVV) with motor, friction clutch, manual stroke adjustment, manual ram adjustment, inclineable, manual central lubrication, two-hand and foot operation

Condition: used, Year of construction: 1959, pressure 063 t Duedeyx Ih Hepfx Apwst throat 280 mm stroke 8 - 100 mm no. of strokes 65 /min distance table/ram, max. stroke up, adjustment up 550 mm table surface area 630 x 500 mm hole in the table 230 mm table height over floor 740 mm table adjustable 200 mm ram surface 320 x 260 mm ram adjustment 63 mm power capacity 5,5 kW weight 4,6 t Dimensions (WxDxH) 1,4 x 1,8 x 2,4 m permitted for manual loading according to the German Safety Regulations (UVV) with motor, friction clutch, mechanical overload protection in ram, manual stroke adjustment, manual ram adjustment, adjustable table, manual centralized lubrication, two-hand operation Press is currently under revision

Year of construction: 2022, condition: new, ROBOPAC WRAPMAN Dujdpfxoytb Ius Apwot Stretch film wrapping machine with friction film carriage and manual tension adjustment. New machine – showroom model • Max. roll diameter: 1.80 m • Max. pallet height: 2.00 m • Dimensions: 2,518 mm x 1,012 mm x 570 mm • Total weight: 116 kg

Condition: new, 900 mm 900 mm 900x900 mm saw band length 9300 x 67 x 1,1 mm table height 790 mm band speed 14 - 60 m/min total power requirement 11 kW weight of the machine ca. 8,45 t dimensions 4,485 x 1,68 x 3,15 m The semi-automatic, hydraulic saws from the X-tech line offer the best Saw technology and best performance when cutting special steels • The electro-welded machine frame and the steel saw frame meet requirements all cutting needs and eliminate vibration and noise. • The chip conveyor is hydraulically driven and the speed is adjustable • All movements of the machine (saw frame, vice, feed, Saw band guides) are carried out thanks to modern linear guides with high static and dynamic load performance, which also has very low sliding friction to guarantee. • Another characteristic feature is the roles for the Positioning of the material by a hydraulic motor are driven. They move at right angles to the material, and thus allowing optimal clamping of the material. • Thanks to the height control of the saw band position, the operator can place the band in place near the top edge of the material. After the cut is finished, the tape automatically raised back to the previous position. Alternatively you can also “Remain” can be selected in the lower position. During the The software compares the cutting load with the cutting cycle Default. This means that the sawing system can be stopped in the event of irregularities become. • The saw band is cleaned by two adjustable steel brushes. The drive takes place hydraulically. • The hydraulic unit including filter and pressure gauge guarantees one Dsdpfxsfg E Hpo Apwjut particularly quiet operation at constant pressure. • Finely ground carbide inserts that clamp the saw blade, complete with lateral, hardened and adjustable guide rollers. The adjustable one The tape guide automatically moves as close as possible to the material. • The saw band is tensioned via a hydraulic cylinder, which is carried out by the Machine software is controlled. The voltage is set according to a given Time automatically delimbed when the machine is idle or after a cycle has been carried out. • Automatic version with CNC control in the X-TECH 900 / 1200 models a feed length of 500 mm for the series for high production rates. • The material is carried by a table with seven rollers. These will driven by a hydraulic orbital motor through which the material can be placed precisely even under maximum load. • All guided movements are carried out by four recirculating ball guides with one high capacity for static and dynamic loading; strong reduced feed friction. Tempered and ground prismatic Guides. Price on request.

Condition: used, assembling machine balancer,manipulator Manufacturer: Bosch Type: Handy-Flex300 Overall size: 900 x 130 x 1220 mm Weight: 24 kg Duodpey E Tz Eofx Apwjt Balancer: - aluminum die-cast housing - stainless steel cable - low friction cable guide - additional safety suspension - adjustable upward stop - isolated spring hook holder - protection against spring breakage Console : - single-column 360° rotatable - torque reaction: Max. 160 Nm = 16 kg - all axes of linear ball bearing - horizontal displacement: 500 mm - vertical displacement: 700 mm Base dimensions: 165 x 120 mm

Condition: not inspected (used), functionality: unexamined, ⚠️ Important Notice: For Business Customers Only (B2B) This sale is exclusively intended for entrepreneurs as defined by § 14 BGB (commercial operators, self-employed persons, freelancers). Sale to private individuals (consumers) is excluded. By submitting a bid or making a purchase, you expressly confirm your status as a business entity and that the acquisition is for your commercial or self-employed professional activities. _____ For sale is a strip coating line. The system originates from insolvency assets and was in successful operation until the facility was closed. Technical specifications & capacities: • Material: Suitable for aluminum and stainless steel coils. • Strip width: 80 mm up to max. 600 mm. • Material thickness: 0.1 mm to 2.0 mm (for aluminum). • Processing speed: approx. 20–25 m/min. • Coil weight: Max. 3,000 kg. • Inner diameter: 400 mm (expandable to 500 mm with available adapter chucks). • Coating options: From narrow color stripes (starting at 7 mm) up to full-surface coating. • Temperature range: Oven operation at approx. 250°C. System design & components: • Infeed: Expandable decoiler with height-adjustable coil transport cart (load capacity 3,000 N). • Coating unit: Double coater for precise paint application using steel roll deflection. • Drying: Drying and firing zone with two Eclipse gas burners and control panel. • Safety & Environment: FID probe for continuous monitoring of solvent concentration in the oven, including control unit. • Cooling: Cooling section with fresh air supply before exiting the oven. • Post-processing: Integrated slitting device for strip longitudinal cutting (incl. slitting knives and spacer rings). • Outfeed: Hydraulic strip guiding, friction plate brake, and transfer arms at the recoiler. Dodpfx Apoyw Hiyeweut Scope of delivery: • Complete system as described. • Accessories (spacer rings, slitting knives, adapter chucks). Inspection & transaction: • Condition: Used, fully operational up to decommissioning. • Location: Wuppertal. • Dismantling/transport: Dismantling and transport to be carried out by the buyer at their own expense. • Invoice: You will receive a proper invoice with VAT shown separately. Terms of sale and delivery: • Condition: The system is sold as is from its current location. • Disclaimer: As this is a B2B transaction between professionals, the sale is made to the exclusion of any warranty and guarantee. • Inspection: On-site inspection is expressly recommended.

Condition: used, functionality: fully functional, Year of construction: 2021, operating hours: 1,449 h, load capacity: 1,200 kg, lifting height: 2,700 mm, free lift: 166 mm, fuel type: electric, mast type: duplex, construction height: 1,840 mm, fork length: 1,150 mm, drive type: Elektro, Pedestrian stacker Duodpfoyczh Tsx Apwst Load center: 600 Mast type: Duplex Condition: Refurbished without guarantee Technical condition: very good Battery voltage: 24V Battery capacity: 225Ah Battery type: PzS Description: Prices are subject to change, ex stock, plus freight and VAT. No warranty and no returns. Inspection possible by appointment. Our general terms and conditions apply. Pedestrian tiller, standard hydraulics, PIN code, finger guard Plexiglas, single polyurethane fork rollers, drive wheel Friction, support wheel Premium, medium battery compartment.

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 3,632 h, load capacity: 1,200 kg, lifting height: 4,150 mm, free lift: 1,554 mm, fuel type: electric, mast type: triplex, construction height: 1,979 mm, fork length: 1,300 mm, drive type: Elektro, High-lift pallet truck Load center: 600 Mast type: Triplex Dujdpfxjyczhye Apwet Condition: Refurbished without warranty Technical condition: very good Battery voltage: 24V Battery capacity: 225Ah Battery type: PzS Description: Prices are non-binding, ex-stock, plus freight and VAT. No warranty/guarantee and no returns. Inspection available by appointment. Our General Terms & Conditions apply. Pedestrian-operated, includes Sensilift and creep speed, plexiglass finger guard, horn, PIN code, single polyurethane fork rollers, drive wheel Friction, support wheel Vulkollan, mid-position battery compartment with plastic cover.

Condition: used, functionality: fully functional, Year of construction: 2021, operating hours: 1,085 h, load capacity: 1,400 kg, lifting height: 3,255 mm, free lift: 1,674 mm, fuel type: electric, mast type: duplex, construction height: 2,135 mm, fork length: 1,150 mm, drive type: Elektro, Stacker Load center: 600 Mast type: Duplex Condition: Refurbished without warranty Technical condition: good Battery voltage: 24V Battery capacity: 225Ah Battery type: PzS Description: Prices are subject to change without notice, ex stock, plus freight and VAT. No warranty/guarantee and no returns. Inspection possible by appointment. Our terms & conditions apply. Dujdsycziqopfx Apwjt Tiller, pedestrian-operated, hydraulic, standard, incl. creep speed, finger guard, Plexiglas, horn, PIN code, tandem premium fork rollers, Friction drive wheel, premium support wheel, medium battery compartment with plastic cover.

Condition: used, functionality: fully functional, Year of construction: 2021, operating hours: 2,342 h, load capacity: 1,200 kg, lifting height: 2,700 mm, free lift: 166 mm, fuel type: electric, mast type: duplex, construction height: 1,840 mm, fork length: 1,150 mm, drive type: Elektro, High-lift pallet truck Dodpfx Apsyczh Hjwout Load centre: 600 Mast type: Duplex Condition: Refurbished, no warranty Technical condition: very good Battery voltage: 24V Battery capacity: 225Ah Battery type: PzS Description: Prices are subject to change, ex stock, plus freight and VAT. No warranty/guarantee and no returns. Viewing by appointment possible. Our general terms and conditions apply. With pedestrian tow bar, standard hydraulics, PIN code, plexiglass finger guard, single polyurethane fork rollers, friction drive wheel, premium support wheel, medium-size battery compartment.

Condition: used, This listing is for the Thermo Scientific Vanquish UHPLC Sytem The unit is in full working condition and is ready for immediate use Overview: Thermo Scientific Vanquish UHPLC Systems 1. Autosampler Purpose: Introduces the sample into the mobile phase stream automatically. Picks up sample from vials, plates, or tubes Injects with high precision (often nL to µL volume range Dedpfxsxhfkze Apwout 2.Pump Module Purpose: Delivers the mobile phase (solvent) through the system at high pressure. Binary pump: Mixes two solvents at high pressure. Ideal for fast gradients. Quaternary pump: Mixes up to four solvents at low pressure. More flexible, but slower gradients. Controls flow rate (e.g., 0.001–5.000 mL/min) Enables gradient elution (changing solvent composition over time 3.Detector Module (x2) Purpose: Detects and measures analytes as they elute from the column. Diode Array Detector (DAD/UV-Vis) – most common; detects UV-absorbing compounds Fluorescence Detector – for fluorescent compounds Charged Aerosol Detector (CAD) – universal detection for non-UV compounds Refractive Index Detector – for sugars, polymers MS (Mass Spectrometer) – advanced, highly sensitive detection Thermo Fisher’s Vanquish platform includes several variants tailored to different analytical needs—from routine HPLC to ultra-high-throughput and low-flow LC–MS workflows: Vanquish Flex UHPLC: Offers flexible HPLC/UHPLC method development and operates up to 1000 bar. It supports binary, quaternary, and dual pumps, plus intelligent tools like solvent monitoring and optional touchscreen interface. Vanquish Horizon UHPLC: Built for maximum performance, offering ultra-high pressure (up to 1500 bar), ultra-low gradient delay volume, biocompatible flow paths, and exceptional retention time stability and detector sensitivity. Vanquish Neo UHPLC: Designed for next-gen low-flow LC‑MS workflows (nano‑ to micro‑flow), delivering high‑sensitivity, high‑robustness separations. Vanquish Analytical Purification LC: Specialized for precise fractionation—high pressure (700–1500 bar), customizable flow (up to 10 mL/min), integrated fraction collector, multimodal detection, and advanced automation. Key Features Across the Platform Modular Design: Choose components (pumps, samplers, detectors, thermostatting units) to configure a tailored system. Most models offer biocompatible flow paths and Viper fingertight fittings for low dead‑volume, tool‑free setup. Temperature Control: High-performance column compartments with active/passive heating, pre‑heating, and post‑column cooling to manage frictional heating and improve reproducibility. Detection Options: Available detectors include Diode Array (with LightPipe optics for superb sensitivity), Charged Aerosol Detector (CAD) for near‑universal detection, fluorescence, multi‑wavelength, refractive index, and mass spectrometry detection. Software Integration: Fully compatible with Chromeleon CDS (with SII for streamlined MS integration), plus Xcalibur and TraceFinder for LC‑MS workflows. MS Integration: Vanquish systems interface seamlessly with Thermo MS platforms—Triple Quadrupole and Orbitrap—for sensitive, accurate mass analysis. Operational ROI: Thermo highlights reduced unplanned repairs, improved productivity, and net-zero ambitions through renewable-powered manufacturing.

Condition: new, Year of construction: 2025, weight 2600 kg height 1550 mm 0 2197 l length 3800 mm revolutions per minute 1500 U/min voltage 380/50 V/Hz engine output 2 x 7 kW The VKT 2200 is a linear vibratory finishing machine and is used for the surface treatment of parts made of all types of metallic and non-metallic materials. The machines in this series are generally used for long and large-volume parts. With the help of movable partitions in the machine, sensitive parts can be processed without being damaged by friction from other parts. Optional accessories - Pneumatic sound insulation hood - Speed control - Dosing pump - Magnetic valve - Electrical control panel stand - Rinsing water pipe system The pictures are for orientation only. The optional accessories can be surcharge. Gerd Wolff reserves the right to change the colour and technical data of the machines. Dedpfeymf Sqex Apwsut The VKT 500 is manufactured for our sales brand "GERD WOLLF Maschinenfabrik", by a renowned manufacturer from Türkiye.

Condition: new, Year of construction: 2026, Ref:10718 . NEW 2026 Universal Z Card Line. Fully automatic line for making Z card fold-out maps, timetables and other promotional card leaflets etc. State of the art modular design and attachments that can be added as users requirements change. This unique line is capable of performing many different types of production with just one machine. Briefly Comprising:- LoCo friction feeder – bottom (option to go to 300 mm wide) LoCo friction feeder – inner text LoCo friction feeder – top Choice of PVA Cold glue or EVA Hot-melt gluing system – 4 heads with electronic control Counter/kicker Shingle delivery table Including accessories & spare parts. (In-house compressed air supply required). Specification: Djdpfxjt Dpwdj Apweut Stock weight : 90 – 400 gsm2 Production speed : max.150/min. depending on stock. Power requirement : Single phase, 220V, 3kW

Condition: used, Single-Column Eccentric Press WEINGARTEN Type EV 63 Machine No. 738 / 61 Year of manufacture: 1962 Pressing force: 63 tons Throat depth: 260 mm Table size: 630 x 530 mm Table opening: Ø 210 mm Ram area: 315 x 260 mm Adjustable ram stroke: 8–100 mm Ram adjustment: 63 mm Ram shank bore: Ø 40 mm, with clamping piece Installation height: max. 450 mm Strokes per minute: 115 spm Air requirement: min. 4.5 bar Motor power: 4 kW Electrical connection: 380 Volt, 50 Hz Table height above floor: approx. 750 to 900 mm - Electric stroke release via foot switch or two-hand control - Overload protection by shear plate - Clutch-brake combination via WEINGARTEN friction-threaded clutch with TDC safety - Front crankshaft support bearing - Press table height adjustable via 2 threaded spindles - Manual central lubrication system - Free-standing electrical cabinet - UVV (accident prevention regulations) for manual loading operations Space requirements (L x W x H): 1750 x 1600 x 2430 mm Weight: 4.5 tons Djdpfek S Htxex Apweut In good condition

Condition: new, The rotary type cleaning unit allow to process parts directly on board the work-cells avoiding costly transport operations. The transfer of the components takes place with an in-built rotary index transfer system which guarantees satellite positioning at loading / unloading and inner operations. Considerable flexibility in the change of costumized jigs as components holders. Elimination of packaging costs and transport costs Re-equipment of the plant in a very short time Dsdpfx Apjwdfyqeweut Number of satellites to be selected in accordance with a defined and accurate washing, blowing and drying process; These plants are fit for the treatment with aqueous detergent solutions, as: Critical machined parts and delicate parts with blind holes and threaten holes, compoenent as: valve bodies, automatic actuators, burner bodies, water meters, friction flywheels, gas valves, hydraulic, pneumatic multichannel distributorss. a.s.o.).

Condition: excellent (used), Machine for grinding down the teeth of HSS and friction circular saw blades Dsdpewyc Nhofx Apwout

Year of construction: 1963, condition: used, roll surface width 450 mm roll diam. toproll 203 mm roll diam. bottom roll 203 mm output 8,8 kw Small roll gap 0.1 mm Maximum roll gap 47 mm Front/rear roll speed 5-30 rpm Front/rear roll speed 3.2-19.1 m/min Rolls individually driven Friction variable max. 1:6 Manual gap adjustment Manual speed control External temperature control Rollers internally cooled (water cooling) Emergency stop handle (manual operation) on both sides The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. Dodpfx Asyt Rxcspweut We look forward to your visit. Your Markus Hirsch Team

Condition: used, machine/vehicle number: 6444122, Year of construction: 2016, operating hours: 1,117 h, lifting height: 5,400 mm, fuel type: electric, mast type: triplex, battery capacity: 300 Ah, battery voltage: 24 V, Empty weight: 1.438 kg Lifting capacity: 1.600 kg Maximum passing height: 237 cm Supply voltage: 24 V Dimensions of cargo space: 200 x 79 x 237 cm Dusdpfx Apsu Thtgewot Remanufactured: Yes Tyre brand: Vorne: Vulkollan tandem Hinten: Power Friction Please contact Karl Leitner for more information

Condition: used, Year of construction: 2000, type of input current: three-phase, We offer this used Junker Jucam 5002/20 S camshaft grinding machine, year of manufacture 2000. Year of manufacture: 2000 Power rating: 60 kVA Rated voltage: 400 V Frequency: 50 Hz Control voltage: DC 24 V Fusing: 3×100 A Voltage before main switch (circuit F 001): 230 V Voltage before main switch (circuit F 002): 400 V Production information JUNKER GROUP Operating manual included 4. Technical Data 4.1 Electrical connection values Power supply: 400 V / 50 Hz Power: 60 kVA Fusing: 3 x 100 A Conductor cross-section: 5 x 35 mm² Cu 4.2 Mechanical Data Workpiece Workpiece diameter: approx. 100 mm Max. workpiece swing diameter: 150 mm Clamping length: max. 900 mm Z-axis traverse path: max. 1000 mm Max. workpiece swing diameter in steady rest area: 150 mm Loading system Manual, with loading and unloading device Workpiece spindle head Stationary Max. speed: 250 rpm Workpiece drive: frictional connection Workpiece spindle Dimensions: 210 x 700 mm Flange diameter: 180 mm Standard collar diameter: 127 mm Lubrication: oil lubrication Tailstock spindle Longitudinal adjustment manual via sprocket Fixed centre, special version MK 3–centre Clamping pressure adjustable via hydraulics Grinding table Z-axis feed (CNC-controlled) Grinding spindle headstock X-axis infeed (CNC-controlled) Horizontal swiveling B-axis (CNC-controlled) Grinding spindle II Dimensions: 205 x 450 mm Flange diameter: 190 mm Standard collar diameter: 127 mm Lubrication: permanent grease lubrication Bearing seal with sealing air Set air pressure: see separate folder "Machine-specific data sheets" Drive: 30 kW Speed control with frequency converter Max. speed: 4,400 rpm Balancing: electronic Grinding wheel (Grinding spindle II) Type: Borazon (CBN), ceramic bond Diameter: Ø 400 mm Bore: Ø 127 mm Grinding wheel width: 18 mm and 16 mm Max. peripheral speed: 125 m/s Steady rest Type GR – 110 – NR Diameter range: Ø 30.1 – Ø 40 mm Wheel dressing Fine dressing (circumference and flank) with diamond dressing wheel mounted on dressing spindle: Ø 110 mm Dressing spindle Dimensions: 80 x 250 mm Flange diameter: 100 mm Standard collar diameter: 75 mm Dodjy Dv Sdjpfx Apwout Lubrication: permanent grease lubrication Bearing seal with sealing air Set air pressure: see separate folder "Machine-specific data sheets" Drive: 1.8 kW Speed control with frequency converter Max. speed: 24,000 rpm Balancing: electronic If you have any questions or require further information, feel free to send us a message or give us a call.

Condition: new, Year of construction: 2026, functionality: fully functional, Surface Grinding Machine – Column Type (Moving Column) Hardened and ground guideways in longitudinal and cross axes; counter-guides coated with Durcite-B ensure high rigidity and low friction. Longitudinal and cross movements run on V-flat guideways. Computer-controlled automatic feed including: rapid approach to workpiece, adjustable roughing and finishing feed, and automatic return to starting position after cycle completion. Preloaded axial and radial spindle bearings. Annealed machine base ensures high machining accuracy. Reinforced construction and thick-walled castings guarantee maximum rigidity. Adjustable limit stops for longitudinal and cross travel. Modern hydraulic system ensures smooth and stable table movement under heavy loads. PLC control (MITSUBISHI) with touchscreen allows programming of simple grinding cycles. Includes electronic handwheel. Standard Equipment: Touch control system Electronic handwheel Grinding wheel Wheel flange LED machine light Electromagnetic chuck Balancing stand Balancing arbor Safety guards Demagnetizer Cooling system Diamond dresser Machine feet Central lubrication system Tool kit Technical Specifications: Table size: 500 × 1200 mm T-slots: 1 / 14 mm Magnetic chuck: 500 × 1200 mm Longitudinal travel: 1140 mm Cross travel: 540 mm Max. distance spindle–table: 570 mm Max. workpiece weight: 800 kg Grinding wheel: 350 × 20–40 × 127 mm Table speed (hydraulic): 5–25 m/min Model: SGC512AHD Brand: MTP Drives & Spindle: Spindle motor: 5.5 kW Spindle speed: 1440 rpm Hydraulic motor: 2.2 kW Vertical feed motor: 0.75 kW Dimensions & Weight: Length: 3550 mm Width: 2250 mm Height: 2530 mm Weight: approx. 5200 kg Included Additional Equipment: Magnetic separator with paper filter Dsdpey Hr Uysfx Apwout Full machine enclosure Parallel dressing device Dust extraction system DRO (2-axis) Integrated magnetic chuck controller Frequency inverter 6 kW Diamond dresser Additional wheel flange

Condition: used, Year of construction: 2014, Material: PET aluminum-metallized film Material thickness: 9–50 μm Web width: 500–2000 mm Roll width: 2100 mm Web diameter (unwind): max. φ1150 mm Web weight (unwind): max. 1500 kg Product winding diameter: • φ600 mm (3” friction shaft) • φ750 mm (6” air shaft) Dodpfsx Ez Umox Apweut Winding shaft load: max. 500 kg/shaft (center-supported) Core dimensions: • Web core: 3” (φ76.2–76.5 mm), 6” (φ152.4– 153 mm) • Product core width: 100–1050 mm Slit width: 200–1950 mm (up to 5 slits) Machine speed: max. 400 m/min Typical operating speed: 200–250 m/min Unwinding tension: • 50–500 N (φ650 mm or less) 1. Unwinding Section • Shaftless single-axis fixed unwind • Direction: upward or downward • Automatic tension control with feedback detector • Dancer roll included • Core clamping: rotary mechanical chuck • Core sizes: 3” standard, 6” via adapter • Web alignment: manual ±5 mm, automatic ±100 mm 2. Main Drive Rollers • Multiple rollers with specified diameters and surface finishes • Nip and touch rollers with pneumatic pressure control 3. Slitting Mechanism • Upper/lower NC shear cutter • Number of blade units: 6 upper + 6 lower • Slit width adjustment via touch panel • Accuracy: ±0.1–0.2 mm • Dust suction: upper blade nozzles + lower blade suction • Optional razor cutter (manual adjustment) 4. Mini Winder Placement: below slitter Units: 2 (left / right) Drive: AC servo motor Tension: dancer roll control Traverse width: 300 mm Winding diameter: φ500 mm 5. Winding Section • Duplex center drive • 3” air friction shaft + 6” air shaft • Automatic tension control linked to winding diameter • Touch roll with pressure control • Core positioning via collar bar 6. Product Discharge • Hydraulic lift tray • Motorized slide-out with tilt mechanism Electrical & control: Line motor: 7.5 kW AC servo Winding motor: 11 kW AC induction Unwinding motor: 11 kW AC servo Static eliminators: 5 units (Keyence SJ-HA) Control panels: main panel, winding panel, unwind panel, mini winder panel, auxiliary panel PLC: Fuji Electric Utilities, dimensions & environment: Power supply: AC 200 V, 60 Hz, 3-phase Power consumption: 70 kVA Air supply: 0.5 MPa, 500 L/min (dry air) Machine weight: approx. 12 tons Paint color: urethane coating (E-31872) Installation environment: cleanroom Class 10,000 Floor load capacity requirement: ≥ 2 ton/m²

Condition: used, Year of construction: 2002, grinding diameter 450 mm grinding length 1500 mm centre height 225 mm Control FAGOR EQUIPEMENT - T1: grinding wheel diameter 500 mm - T2: grinding wheel diameter 400 mm - T6: HF Fischer spindle MFV or MFZ 1224/1242/1260 - T7: HF Fischer spindle MFV or MFZ 1224/1242/1260 - Marposs tool measurement Dsdpfeuxfu Nox Apwjut - active longitudinal positioning - Elaso GAP-control on T1 and T2 contactless integrated in the control surface - Elaso GAP internal grinding with fluid sensor for T6 and T7 - semi-automatic balancing by Elaso integrated in the control surface for T1/T2 - tailstock hydraulic with fine adjustment +/- 150 microns - dresser on workpiece spindle side table mounted - dresser on tailstock side table mounted - dresser on upper table - new service- and userfriendly housing SPECIAL EQUPEMENT: Workhead with direct drive - strongly recommended for non-circular grinding - workpiece weight flying max. 75kg - workpiece weight between centres 150kg - water-cooled B-axis with direct drive - center height 225 mm - extremely torsionally stiff - highly accurate positioning - resolution ° - water-cooled Hydrostatic ball screw - x-axis - wear-free, as there is no contact during operation - no loss of precision, even during long-term use at full load and maximum speed - no friction at low speeds - no friction force backlash when the direction of rotation changes - translates even the smallest rotational movements - no stick-slip effect even at low speeds - no fluctuations in frictional torque due to ball circulation - higher axial stiffness compared to ball screws - significant improvement in damping, resulting in better workpiece surface finish and tool life - no oscillations due to ball circulation - also suitable for high speeds and accelerations - cost-effective alternative to the linear motor with greater precision and significantly lower heat generation - significantly less power dissipation and, as a result, no problems with swarf on permanent magnets New hydraulic unit - optimized temperature control (chiller) - Energy-saving Only one pump controlled by VFD - Pressure monitoring - monitoring of the hydrostatic oil for water content. (Damage to the bellows is recognised and detected prematurely) -fine adjustment +/- 150 microns Paper belt filter 375l – alternative 480l Grinding mist extraction system – emulsion MECHANICAL OVERHAUL -complete machine according to Kellenberger protocoll -new painting ELECTRICAL OVERHAUL - new modern Fagor CNC with BEMA HMI - new electric cabinet - new digital drive technology - replacement of all electrical cables, switches etc. - new absolute external scales in x- and z-axis - new absolute encoder (B-axis) Grinding software BEMA-Standard: - workpiece zeroing - grinding wheel zeroing - dressing diamond measuring - corrections - external and internal surface grinding - external and internal angle grinding (turning of the b-axis, dressing with straight wheel) - external and internal radius grinding (radius dressed on wheel) - semi-automatic traverse grinding - workpiece zeroing - 2 dressing diamonds - 1 dressing blade - dressing roll - 3 flat dresser - corrections - Z-position measurement - GAP control Optional grinding cycles at no extra charge: Profile plunge grinding: - external and internal profile plunge grinding with profile wheel Pr...

Year of construction: 2026, condition: new, Airstreamer 580 – High-Performance Extraction System for Aluminium Chips The Airstreamer 580 is a powerful extraction system designed for aluminium chips, making it ideally suited for industrial applications. Its robust construction and mobile design with a removable chip container ensure flexible use and easy emptying. Technical specifications: ✔ Weight: 150 kg, mobile on castors ✔ Chip container: 170-litre capacity, easily detachable ✔ Filter: M-class polyester, antistatic version ✔ Pneumatic filter cleaning (compressed air connection required on site) ✔ Motor: 3.0 kW, 400 V, 50 Hz ✔ Suction inlet: 120 mm diameter ✔ Air flow: 2500 m³/h ✔ Nozzle pressure: 30 mbar Safety notice: ⚠️ Certain types of dust and particles can be combustible, which may lead to filter fires or dust explosions. The operator is obliged to take appropriate measures to eliminate ignition sources and must comply with the relevant ATEX directives. ⚠️ This version is not ATEX certified. An ATEX Zone 22 version is available upon request. Optional accessories: 🔹 Super-flexible suction hose (120 mm), low-friction design Dedpopa Nw Isfx Apweut 🔹 Antistatic kit for grounding all metal components on the vacuum 🔹 Remote start device 🔹 Cleaning set (60 mm) for floor and machine cleaning, made of PVC Includes floor and machine cleaning nozzles, 4 m suction hose, and adapter 🔹 Y-hose adapter (100 mm to 100 + 60 mm) with shut-off slide valve 🔹 XXL silencer for reduced working noise and increased efficiency The Airstreamer 580 offers a reliable and efficient solution for aluminium chip extraction in industrial manufacturing processes. We look forward to hearing from you! Plantec Maschinen GmbH

Year of construction: 2026, condition: new, Airstreamer 480 – Extraction System for Aluminum Chips The Airstreamer 480 is a high-performance extraction system for aluminum chips, ideally suited for industrial applications. Its robust construction and mobile design, featuring a detachable chip container, ensure flexible use and easy emptying. Technical Specifications: ✔ Weight: 120 kg, mobile on castors ✔ Chip container: 110-liter capacity, easily detachable ✔ Filter: M-Class polyester, antistatic version ✔ Pneumatic filter cleaning (compressed air connection required on site) ✔ Motor: 2.2 kW, 400 V, 50 Hz ✔ Suction inlet: 100 mm diameter ✔ Airflow: 1,500 m³/h ✔ Nozzle pressure: 30 mbar ✔ Dimensions (W x D x H): approx. 69 x 90 x 241 cm Safety Notice: ⚠️ Certain types of dust and particles can be combustible, posing a risk of filter fires or dust explosions. The operator is obliged to implement appropriate measures to eliminate ignition sources and to observe applicable ATEX guidelines. ⚠️ This model is not ATEX-certified. A version for ATEX Zone 22 is available on request. Optional Accessories: 🔹 Super-flexible, low-friction suction hose (120 mm) 🔹 Antistatic kit for grounding all metal parts of the vacuum 🔹 Remote start system 🔹 Cleaning set (60 mm) for floor and machine cleaning, made of PVC Includes floor and machine cleaning nozzle, 4 m suction hose, and adapter 🔹 Y hose adapter (100 mm to 100 + 60 mm) with shut-off slide 🔹 XXL silencer for reduced operating noise and increased efficiency Dedpfxopa Nwyo Apwout The Airstreamer 480 provides a reliable and efficient solution for the extraction of aluminum chips in industrial manufacturing processes. We look forward to hearing from you! Plantec Maschinen GmbH

Condition: excellent (used), Year of construction: 2022, x-axis 550 mm y-axis 450 mm z-axis 375 mm control SIEMENS 840D SL spindle turning speed range 1-17.500 U/min weight of the machine ca. 10 t dimensions of the machine ca. H 6,30 x 3,85 x 3,70 m The machine is designed for friction stir welding. Dodpfx Asxxmmfjpwout Reinforced Z-axis (5000 N) required for the welding process. Spindle speed increased to 1-17,500 rpm. including swivel axis Operating hours: approx. 11,111 h. Spindle running time: approx. 4,116 h.