Used Friction for sale (255)

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 3,632 h, load capacity: 1,200 kg, lifting height: 4,150 mm, free lift: 1,554 mm, fuel type: electric, mast type: triplex, construction height: 1,979 mm, fork length: 1,300 mm, drive type: Elektro, High-lift pallet truck Load center: 600 Mast type: Triplex Condition: Refurbished without warranty Technical condition: very good Chsdpfx Abeyczhyj Dob Battery voltage: 24V Battery capacity: 225Ah Battery type: PzS Description: Prices are non-binding, ex-stock, plus freight and VAT. No warranty/guarantee and no returns. Inspection available by appointment. Our General Terms & Conditions apply. Pedestrian-operated, includes Sensilift and creep speed, plexiglass finger guard, horn, PIN code, single polyurethane fork rollers, drive wheel Friction, support wheel Vulkollan, mid-position battery compartment with plastic cover.

Condition: used, functionality: fully functional, Year of construction: 2021, operating hours: 2,342 h, load capacity: 1,200 kg, lifting height: 2,700 mm, free lift: 166 mm, fuel type: electric, mast type: duplex, construction height: 1,840 mm, fork length: 1,150 mm, drive type: Elektro, High-lift pallet truck Load centre: 600 Csdpsyczh Hofx Ab Djhb Mast type: Duplex Condition: Refurbished, no warranty Technical condition: very good Battery voltage: 24V Battery capacity: 225Ah Battery type: PzS Description: Prices are subject to change, ex stock, plus freight and VAT. No warranty/guarantee and no returns. Viewing by appointment possible. Our general terms and conditions apply. With pedestrian tow bar, standard hydraulics, PIN code, plexiglass finger guard, single polyurethane fork rollers, friction drive wheel, premium support wheel, medium-size battery compartment.

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 1,583 h, load capacity: 2,500 kg, fuel type: electric, drive type: Elektro, Low lift pallet truck Codpfxou D Sv De Ab Dehb Load center: 600 Technical condition: very good Battery voltage: 252V Battery year: 24 Battery condition: 80 - 100% Description: Prices are subject to change, ex stock, plus freight and VAT. No warranty/guarantee and no returns. Inspection by appointment possible. Our general terms and conditions apply. Lift height suitable for pallet handling, adjustable tiller head, fixed side protection walls, transistor control 12.5 km/h, creep speed, power steering, PIN code, load protection grid, E-bar, writing console, small item holder, tandem Vulkollan fork rollers, drive wheel Friction, support wheel Vulkollan, medium battery compartment for lithium.

Condition: used, functionality: fully functional, Year of construction: 2021, operating hours: 1,085 h, load capacity: 1,400 kg, lifting height: 3,255 mm, free lift: 1,674 mm, fuel type: electric, mast type: duplex, construction height: 2,135 mm, fork length: 1,150 mm, drive type: Elektro, Stacker Chedpjycziqefx Ab Dsb Load center: 600 Mast type: Duplex Condition: Refurbished without warranty Technical condition: good Battery voltage: 24V Battery capacity: 225Ah Battery type: PzS Description: Prices are subject to change without notice, ex stock, plus freight and VAT. No warranty/guarantee and no returns. Inspection possible by appointment. Our terms & conditions apply. Tiller, pedestrian-operated, hydraulic, standard, incl. creep speed, finger guard, Plexiglas, horn, PIN code, tandem premium fork rollers, Friction drive wheel, premium support wheel, medium battery compartment with plastic cover.

Condition: used, Single-column – Eccentric press WEINGARTEN Type EV 63 Machine No. 738 / 61 Year of manufacture 1962 Pressing force 63 tons Stroke 260 mm Table area 630 x 530 mm Table opening Ø 210 mm Slide area 315 x 260 mm Adjustable slide stroke 8-100 mm Slide adjustment 63 mm Tool holder bore Ø 40 mm, with clamping piece Installation height max 450 mm Stroke rate 115 strokes / min Compressed air requirement min. 4.5 bar Motor power 4 kW Power connection 380 Volt, 50 Hz Table height above floor approx. 750 to 900 mm - Electrical stroke release via foot switch or two-hand control Codok S Htxopfx Ab Dshb - Overload protection by shear plate - Clutch-brake combination by WEINGARTEN friction-thread clutch with top dead center through-drive protection - Front crankshaft support bearing - Press table adjustable in height via 2 threaded spindles - Manual centralized lubrication - Control cabinet positioned beside the press - UVV (German trade association for accident prevention) for manual feeding operations Space requirement L x W x H 1750 x 1600 x 2430 mm Weight 4.5 tons Good condition

Condition: new, Year of construction: 2025, Fully automatic High-speed Sideshrink Machine. Continuous motion sealing machine with moving sealing unit for reliable and trouble free packaging. PRO-Version including external finger chain infeed conveyor system and friction feeder. Touchscreen panel for user friendly operation. No-product-automatic-stop-system. Easy and fast changeover of formats. Less film wastage reduces film costs. Ideal in combination with the AMTEC SHRINKtunnel POF-L (High-Speed) PRO-Version. Can be combined with POF-PE-Shrink Tunnel. - Specifications: max. speed of the machine in neutral: 120 cycles/minute; max. packaging size: L(80-1000)xW(80-400)xH(5-180) mm; sealing blade length: 500mm; 220V, 6.5kW, 6bar, 0.6m³; machine dimensions: L5405xW1780xH1380 mm. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty. Chsdpfx Abjv Nl Hpe Dsb

Condition: new, Year of construction: 2025, Fully automatic continuous side sealer for fast and reliable product flow due to continuous motion sealing unit. PRO-Version including external finger chain infeed conveyor system and friction feeder. Touchscreen panel for user friendly operation. No-product-automatic-stop-system. Easy and fast changeover of formats. Less film wastage reduces film costs. Ideal in combination with the AMTEC SHRINKtunnel POF-L (High-Speed) PRO-Version. Can be combined with POF-PE-Shrink Tunnel. - Specifications: max. speed of the machine in neutral: 70 cycles/minute; max. packaging size: L(80-700)xW(80-380)xH(5-180) mm; sealing blade length: 530mm; 220V, 6.5kW, 6bar, 0.6m³; machine dimensions: L4755xW1660xH1370 mm. Chjdpov Nl Hisfx Ab Dob Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: new, Year of construction: 2025, Fully automatic High-speed Sideshrink Machine. Continuous motion sealing machine with moving sealing unit for reliable and trouble free packaging. PRO-Version including external finger chain infeed conveyor system and friction feeder. Touchscreen panel for user friendly operation. No-product-automatic-stop-system. Easy and fast changeover of formats. Less film wastage reduces film costs. Ideal in combination with the AMTEC SHRINKtunnel POF-L (High-Speed) PRO-Version. Can be combined with POF-PE-Shrink Tunnel. - Specifications: max. speed of the machine in neutral: 120 cycles/minute; max. packaging size: L(80-1000)xW(100-500)xH(5-180) mm; sealing blade length: 630mm; 220V, 6.5kW, 6bar, 0.6m³; machine dimensions: L6350xW1950xH1380 mm. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty. Chjdpfjv Nl Hvox Ab Djb

Condition: new, OMEC 3-roll mechanical symmetrical calendering machine with double feed New “CE” marked Made in Italy USEFUL WORKING WIDTH: 2050 mm UPPER ROLL DIAMETER: 150 mm LOWER ROLL DIAMETER: 150 mm SIDE ROLL DIAMETER: 150 mm MAX. CALENDERING THICKNESS 1.5 x D: 4 mm MAX. CALENDERING THICKNESS 3 x D: 4.5 mm MAX. CALENDERING THICKNESS 5 x D: 5 mm MACHINE DIMENSIONS: 920 x 3400 x 1100 mm TOTAL INSTALLED POWER: 6.5 Kw Chedpfogyk S Asx Ab Dsb WEIGHT: 1700 KG The FX3-3 series distinguishes the asymmetrical 3-roll mechanical calendering machines with a simple FULL FEED system. The side roll (bending roll) is mounted as standard with steel supports and bearings, and bronze pads on the outside guarantee maximum reliability and minimal friction over time. The rotation of the rolls is applied to the UPPER roll and the LOWER roll via a gearbox and a self-braking motor, and the translations and sheet clamping also use motors and gearboxes from leading brands. Equipped with hardened rolls, motorized translation and clamping, preparation for mounting profiled rolls and a conical device positioned directly in the upper roll, these machines represent the best compromise between absolute quality and ease of use for the operator for the most varied cylindrical and conical calendering operations. As standard, the upper roll opens laterally to extract the calendered sleeve. MACHINE CONFIGURATION: UPPER and LOWER ROLLS, MOTORIZED, rotating with equal power. SIDE ROLL, MOTORIZED, for up/down movement. MOTORIZED SHEET CLAMPING. DIGITAL DISPLAY for the position of the side roll. DIGITAL DISPLAY for the sheet clamping height. ROLL HARDENING: HRC 55/60, DEPTH 2 mm. Side roll supports in steel + sealed bearings + external bronze pads. PREPARATION FOR INCLINING the side roll(s) to create cones (conical device excluded). EXTERNAL CONTROL LEVER for roll inclination (right) for FX3.2/FX3.3 - (right + left) for FX4.1/FX4.2. PREPARATION FOR PROFILED ROLLS. FOOT PEDAL: 2 PEDALS + control for side roll up/down movement and sheet clamping + emergency stop button. ELECTRONIC CONTROL of feed stages. ELECTRICAL PANEL COMPLIANT WITH CE STANDARDS. INCLUDED WITH THE MACHINE: - Front conical device in the upper roll. - Digital display for the position of the side roll. - Digital display for the sheet clamping height.

Condition: new, Bernardo Universal Lathe Compact 400 V Technical Specifications Center distance 850 mm Center height 200 mm Swinging diameter over bed 400 mm Swinging diameter over cross slide 245 mm Bed width 260 mm Spindle bore 52 mm Spindle mount DIN 55029, D1-5 Speed range, 2 steps 50 - 450 / 450 - 2500 rpm Range of longitudinal feeds (20) 0.025 - 2 mm/rev Range of cross feeds (20) 0.012 - 1 mm/rev Metric threads (26) 0.2 - 14 mm Inch threads (42) 1 - 80 TPI Tailstock diameter 50 mm Tailstock travel 120 mm Chjdpfxsd Ertrs Ab Deb Tailstock mount MK 3 Motor power 5.5 kW (7.5 hp) Machine dimensions (W x D x H) 1900 x 1000 x 1610 mm Weight approx. 1185 kg Features Standard equipped with a Delta frequency inverter for high torque in the lower speed range and nearly constant speed under load Infinitely variable speed control; the set speed is displayed on a digital display To minimize the effects of vibrations, the massive prism bed is additionally equipped with ribs Versatile applications in general mechanical engineering, production, and the manufacture of individual parts Modern main spindle bearing with angular ball bearings in a precision design The machine bed, cast in one piece, is extremely torsion-resistant and has low vibration, thus fulfilling an essential prerequisite for precise turning Space-saving installation possible thanks to a chip tray that can be pulled out to the front Standard equipped with a 52 mm spindle bore for machining large shaft diameters Scope of supply • 3-axis digital display ES-12 V with LCD display • 3-jaw chuck PO3-200 mm / D5 • Faceplate 320 mm • Fixed steady rest - bore diam. max. 130 mm • Traveling steady rest - bore diam. max. 100 mm • Coolant system • Quick-change tool holder with 4 inserts • Safety device for quick-change tool holder • Micrometer length stop • Friction clutch • Motor with magnetic brake according to CE standard • Initial filling with Shell Tellus 46 • Frequency inverter • Digital speed display • Pull-out chip tray • LED machine light • Change gears • Reduction sleeve • 2 centers • Chip guard • Operating tools

Condition: like new (used), Year of construction: 2022, operating hours: 100 h, functionality: fully functional, resolution (max.): 1,200 dpi, paper weight (min.): 20 g/m², paper weight (max.): 1,000 g/m², paper width (min.): 100 mm, paper width (max.): 600 mm, paper height (min.): 1 mm, paper height (max.): 100 mm, number of feeding trays: 1, total length: 1,000 mm, year of last overhaul: 2023, type of input current: DC, Lightly used Trojan3 OPX digital CMYK printer with VF280 high speed vacuum friction feeder, ideal for high-quality short-run printing on a wide range of substrates. Purchased new in October 2022 and used only for limited in-house jobs. Well suited for packaging, labels, mailings, and other variable data or short-run applications. For sale: Complete Trojan3 OPX digital printing solution including the VF280 High Speed Vacuum Friction Feeder and conveyor system. The Trojan3 OPX is a CMYK pigment ink digital printer based on HP technology, offering high print quality and reliable performance. It is designed for flexible, on-demand production and is ideal for companies working with packaging, cards, envelopes, mailings, or other flat products. Key specifications: - Ink type: Pigmented CMYK ink based on HP technology - Maximum print width: 297 mm - Print speed: Up to 27 m/min - Print resolution: 1200 x 1200 dpi - Conveyor with vacuum in 600 mm and 1,000 mm widths - Automatic height calibration from 0–100 mm - 5 vacuum zones with adjustable suction - 15.6” touch panel - Trojan Control Software RIP VF280 High Speed Vacuum Friction Feeder, product size up to 495 mm x 710 mm. The system has only been used occasionally, as we do not have the internal competencies to fully utilize it, and therefore, it has significantly less usage than typical for its age. The equipment is in good working condition and can be inspected and tested by appointment. Included in the sale: - Trojan3 OPX digital printer - Conveyor with vacuum (600 mm and 1,000 mm widths) - VF280 High Speed Vacuum Friction Feeder - Touch panel and Trojan Control RIP software Chedpfx Asy R A S Dsb Deb Year of purchase: October 2022 Condition: Very good, used Location: Denmark Reason for sale: We invested in this solution to handle small print jobs in-house, but due to a lack of internal resources and competencies, we have not implemented it as planned.

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, Equipment: CE marking, documentation/manual, Numerically controlled machining centres WINLINE WINLINE is a modern and innovative machining centre dedicated to the production of wooden windows and doors components. WINLINE is performing the entire working cycles including the load /unload and the positioning of the parts for each needed operation, under the direct control of the NC. This new level of integrated automation can afford the highest level of precision. The machine is a real “one-man factory”: controlled by a single operator, performs the complete process on each component without the need of second passes, from squared planed all round parts to finished parts ready for assembly and painting process. It also gives the operator time to perform any further processing regarding the construction of a window: molding, sizing, assembly of the elements at the clamping machine, assembly of the hardware, assembly of the glass etc. WINLINE can produce any kind of window component, with any type of jointing (negative profile and dowels, mechanical fixing, open tenons, closed tenons...). The machine can perform the highest achievable level of productivity in each single case. Locking devices are engineered to ensure pieces stability and the highest level of precision, top constant quality surface in each operation and eliminates all kinds of marks and friction abrasions on finished parts, that in traditional systems may be caused by friction and sliding of the pieces on the handling device. WINLINE operating groups are engineered for heavy duty operations with high reliability. The machine can totally integrate with any cad/cam system allowing a direct transfer “from the project directly to the execution and production”. The base machine includes: Mobile gantry structure and double Y axis with independent carriages Pieces manipulator: loading, unloading and clamp exchange Automatic lubrication system Multizone system Automatic movement of panel supports Belt conveyor for chips and off-cuts removal Numerical control Chjdpfx Abjwnx Age Dob Personal computer desktop with 3D video card and LCD Electrical equipment conditioned air Documentation Maintenance equipment Remote keyboard Industry 4.0 - Integration with factory systems

Year of construction: 2008, condition: ready for operation (used), functionality: fully functional, Scratch testing device for characterizing the adhesion and scratch resistance of thin coatings and bulk materials The scratch testing method involves scoring the surface with a diamond tip under a constant or progressive load. During the scratch process, the specimen moves under the video system to examine the various types of damages caused by the tip and correlate them with the applied load. Chodpfjytrufox Ab Dob The images can be digitized and precisely mapped onto emission, acoustic, and load diagrams. This standard procedure enables the comparison of different coatings, substrates, coating thicknesses, surface preparations, and the scratch resistance of bulk materials. Features include an acoustic emission sensor, multi-pass scratch function (repeated scratching along the same track), friction force measurement, and the 2018 upgrade: new illumination system with analyzer, polarizer, 2 apertures and filters, plus high-resolution INFINITY 5X and 20X objectives, and lens holder with adjustment screws for easy tip/microscope calibration. Includes calibration set for table speed and applied load sensor.

Condition: used, Year of construction: 2023, Grimme Select 200 / . / K80 / Hydr. support foot / Hydr. drawbar / Plastic coulter plates / Adjustable center coulter / Rod depth adjustment from terminal / Terradisc / Hydr. coulter discs / Sieve channel width 1700mm / Pitch-independent friction drive Chedpfxotgtm Rs Ab Dsb

Condition: used, Year of construction: 2022, Documentation in German Spr Type plate PTO shaft 910 mm with / friction clutch Container attachment L 3200 swivel mounted ex works Mud flaps L / and ladders LED lighting to the rear for road travel Roll-up tarpaulin L / with manual operation Cedpferxr R Sox Ab Dshb

Condition: used, Year of construction: 2023, Spreading disc set V-Set 1 3-way unit Boundary spreading unit Limiter V / pipe protection bracket S Rolling device pluggable Spreading unit ZA-V Hopper attachment S / 2000 PTO shaft with friction clutch Built-in parts for ZA basic units Mud flap S / LED lighting Chedpfx Abot Dwh Ro Djb

Condition: used, Year of construction: 2024, Basic hopper / ZA-V Easy spreader unit / warning sign foiling / 910 mm PTO shaft / with friction clutch / S 1400 hopper extension, welded / factory-fitted / S mud flap / LED lighting to rear / Easy operating computer Chedpfxjuhp Ehs Ab Dob

Condition: used, Year of construction: 2023, 3-way unit Boundary spreading system Limiter V Pipe protection bracket L Mechanical / position indicator Spreader ZA-V hopper extension S 2000 Built-in parts for / ZA basic units PTO shaft with friction clutch Strainer L and ladders / LED lighting to the rear Chsdpfet Dwibox Ab Deb

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, LASKA FZ 175 | Emulsifier / Meat Emulsifying Cutter (Micro-Cutter) Codpjzgxr Nsfx Ab Dehb Manufacturer: LASKA Model / Type: FZ 175 Serial number: 14127 Year of manufacture: 2012 Power supply: 400 V | 3 Ph | 50 Hz | 155 A Power: 91 kW Diameter: 175 mm Dimensions: 2350 x 1180 x 1300 mm The LASKA FZ 175 is a professional industrial emulsifier, a technologically advanced machine that is a key component of modern meat processing lines. This device is designed for continuous operation in medium and large-sized facilities. It is used for ultra-fine, finely granular processing, emulsification, and homogenization of fillings for sausages, frankfurters, pâtés, mortadella, and other similar products. It performs exceptionally well where a perfectly smooth, stable emulsion structure with minimal air bubbles is essential. The core of the machine is a unique, multi-stage geometry of the cutting system, working in conjunction with a 175 mm diameter disc and driven by a powerful 91 kW motor. The LASKA FZ 175 is distinguished by its patented electro-hydraulic system for automatic adjustment of the knife pressure against the disc. This solution guarantees constant, optimal cutting conditions while minimizing friction. In practice, this allows for a reduction in the wear of the working parts by up to 50% compared to traditional emulsifiers, drastically reducing operating costs and eliminating the risk of overheating the raw material.

Year of construction: 2024, condition: new, The FL-430 automatic labeling machine is ideally suited for fast and automated labeling of flat products. The friction feeder allows for easy and reliable separation of products with different thicknesses, dimensions, and materials. - LCD display - Standard speed of up to 30 m/min and a max. label width of 140 mm when used in combination with the 400 friction feeder - Extended version dispenses labels at a max. speed of up to 50 m/min and a max. width of up to 260 mm Cjdpfsickh Rjx Ab Djhb - Transparent labeling is possible

Condition: as good as new (ex-display), Year of construction: 2025, GT 30 - The OPTIMUM premium NC sanding machine with Siemens touch screen. - Electromagnetic clamping plate for fixing the workpiece with automatic demagnetization function - High-quality spindle with precision tapered roller bearings - Hardened and ground table guideways - Turcite-B coated counter guides for high wear resistance and low friction - Grinding spindle with high-quality precision bearings - Grinding wheel can be resharpened directly on the machine using a sharpening device - Digital position indicator - Machine base made of sturdy torsion-resistant cast iron for maximum rigidity and stability - Guideways for longitudinal, transverse and vertical movements are backlash-free and self-centring as V and flat tracks - Precision recirculating ball screws - Guideways and transport spindle with central lubrication - All flat guides are finely scraped and thus guarantee maximum precision of all manual movements - Safety electrics with 24 V DC voltage - Large decoupled handwheels in all three axes - Hydraulic lines according to DIN EN 853 - Sanding accuracy: 0.005 mm - Grain 46 corundum grinding wheel for all common steels - Swivel-mounted control panel makes work considerably easier - Separate hydraulic unit with heat exchanger, avoids vibrations and thermal stress - Two-channel safety electronics - Grinding table splash guard - EMC filter class - With IE3 motor - consumes considerably less energy, resulting in significant cost savings Dimensions and weights Length approx. 3200 mm Chodpfxsymdtyj Ab Dob Width/depth approx. 2200 mm Height approx. 2100 mm Weight approx. 3000 kg Electrical data Total connected load 6.5 kW Supply voltage 400 V Mains frequency 50 Hz Surface grinding table Clamping surface length 300 mm Clamping surface width 600 mm Grinding wheel(s) Outer diameter 350 mm Width 40 mm Bore 127 mm Peripheral speed 27 m/s Spindle Speed 1450 min¯¹ Concentricity 0.005 mm X-axis Feed speed 5 - 25 m/min Scope of delivery Unit of measure: piece Packaging unit: 1 Digital position indicator Coolant device Balancing mandrel Grinding wheel grit 46 Diamond pin Operating tool Manual oil pump LED lamp Electromagnetic clamping plate Demagnetizing function Equipment Electromagnet clamping plate Splash guard table enclosure Automatic demagnetizing device Parallel dressing device ✔ Coolant device 125 W Work light LED lamp Alignment feet ✔

Condition: as good as new (ex-display), Year of construction: 2025, GT 40 – The OPTIMUM Premium NC Grinding Machine with Siemens Touch Screen. • Electromagnetic clamping plate for securing the workpiece, featuring automatic demagnetization function • High-quality spindle with precision tapered roller bearings • Hardened and ground table guideways • Turcite-B coated counter-guides for high wear resistance and low friction • Grinding spindle equipped with premium precision bearings • The grinding wheel can be dressed directly on the machine using the dressing device • Digital position display • Machine base made from stable, torsion-resistant cast iron for maximum rigidity and stability • Guideways for longitudinal, cross, and vertical movements are backlash-free and self-centering, designed as V and flat ways • Precision ball screw drives • Guideways and feed screws with centralized lubrication • All flat guides are hand-scraped, guaranteeing the highest precision for all manual movements • Safety electronics with 24 V DC voltage • Large, decoupled handwheels on all three axes • Hydraulic lines compliant with DIN EN 853 • Grinding accuracy: 0.005 mm • Corundum grinding wheel, grit 46, suitable for all common steels • Swiveling control panel for greatly simplified operation • Separate hydraulic unit with heat exchanger to prevent vibrations and thermal stress • Dual-channel safety electronics • Grinding table splash guard • EMC filter class • Equipped with IE3 motor – significantly reduces energy consumption and provides substantial cost savings Dimensions and Weights Length approx. 3600 mm Width/Depth approx. 2400 mm Height approx. 1900 mm Weight approx. 3600 kg Cedpfxjymduqo Ab Dehb Electrical Data Total connected load: 7.5 kW Supply voltage: 400 V Mains frequency: 50 Hz Surface Grinding Table Clamping area length: 400 mm Clamping area width: 800 mm Grinding Wheel(s) Outer diameter: 350 mm Width: 40 mm Bore: 127 mm Peripheral speed: 27 m/s Spindle Speed: 1450 rpm Run-out accuracy: 0.005 mm X-Axis Feed rate: 5 – 25 m/min Standard Features • Digital position display • Coolant system • Balancing arbor • Grinding wheel, grit 46 • Diamond dresser • Operating tools • Manual oil pump • LED lamp • Electromagnetic clamping plate • Demagnetization function Equipment • Electromagnetic clamping plate • Table enclosure with splash guard • Demagnetization device • Parallel dressing device ✔ • Coolant system 125 W • Working light: LED lamp • Leveling feet ✔

Condition: as good as new (ex-display), Year of construction: 2025, GT 25 – The OPTIMUM Premium NC Grinding Machine with Siemens Touchscreen. • Electromagnetic chuck for securing the workpiece, with automatic demagnetization function • High-quality spindle with precision tapered roller bearings • Hardened and ground table guideways • Turcite-B coated counter-guides for high wear resistance and low friction • Grinding spindle with premium precision bearings • Grinding wheel can be dressed directly on the machine with an integrated dressing device • Digital position display • Machine base made of stable, torsion-resistant cast iron for maximum rigidity and stability • Longitudinal, cross, and vertical axis guideways are backlash-free and self-centering, designed as V and flat guideways • Precision ball screws • Central lubrication for guideways and feed screws • All flat guides are finely scraped, guaranteeing maximum precision in all manual movements • Safety electronics with 24 V DC • Large, decoupled handwheels on all three axes • Hydraulic lines according to DIN EN 853 • Grinding accuracy: 0.005 mm • Corundum grinding wheel, grit 46, suitable for all standard steels • Swivel control panel makes operation significantly easier • Separate hydraulic unit with heat exchanger prevents vibrations and thermal loading • Dual-channel safety electronics • Grinding table splash guard • EMC filter class • Equipped with IE3 motor – significantly reduces energy consumption, providing substantial cost savings Technical Data: Dimensions and Weights Length approx. 2300 mm Width/Depth approx. 1600 mm Height approx. 1675 mm Codpfsymdwfox Ab Dshb Weight approx. 1700 kg Electrical Data Total connected load: 3 kW Supply voltage: 400 V Phases: 3 Ph Current type: AC Mains frequency: 50 Hz Surface Grinding Table Length: 254 mm Width: 508 mm Grinding Wheel(s) Outer diameter: 200 mm Width: 20 mm Bore: 31.75 mm Peripheral speed: 33 m/s Spindle Speed: 2850 rpm Radial runout accuracy: 0.005 mm X-Axis Feed speed: 5 – 25 m/min Packaging unit: 1 Scope of Delivery Unit: Piece Packing unit: 1 Digital position display Coolant system Balancing arbor Grinding wheel, grit 46 Diamond dresser Operating tools Manual oil pump LED lamp Electromagnetic chuck Demagnetization function Features Electromagnetic chuck Table splash guard enclosure Automatic demagnetization device Parallel dressing device 40 W coolant system LED work lamp Leveling feet

Condition: new, 900 mm 900 mm 900x900 mm saw band length 9300 x 67 x 1,1 mm table height 790 mm band speed 14 - 60 m/min total power requirement 11 kW weight of the machine ca. 8,45 t dimensions 4,485 x 1,68 x 3,15 m The semi-automatic, hydraulic saws from the X-tech line offer the best Saw technology and best performance when cutting special steels • The electro-welded machine frame and the steel saw frame meet requirements all cutting needs and eliminate vibration and noise. • The chip conveyor is hydraulically driven and the speed is adjustable • All movements of the machine (saw frame, vice, feed, Saw band guides) are carried out thanks to modern linear guides with high static and dynamic load performance, which also has very low sliding friction to guarantee. Cjdpjfg E Hpofx Ab Djhb • Another characteristic feature is the roles for the Positioning of the material by a hydraulic motor are driven. They move at right angles to the material, and thus allowing optimal clamping of the material. • Thanks to the height control of the saw band position, the operator can place the band in place near the top edge of the material. After the cut is finished, the tape automatically raised back to the previous position. Alternatively you can also “Remain” can be selected in the lower position. During the The software compares the cutting load with the cutting cycle Default. This means that the sawing system can be stopped in the event of irregularities become. • The saw band is cleaned by two adjustable steel brushes. The drive takes place hydraulically. • The hydraulic unit including filter and pressure gauge guarantees one particularly quiet operation at constant pressure. • Finely ground carbide inserts that clamp the saw blade, complete with lateral, hardened and adjustable guide rollers. The adjustable one The tape guide automatically moves as close as possible to the material. • The saw band is tensioned via a hydraulic cylinder, which is carried out by the Machine software is controlled. The voltage is set according to a given Time automatically delimbed when the machine is idle or after a cycle has been carried out. • Automatic version with CNC control in the X-TECH 900 / 1200 models a feed length of 500 mm for the series for high production rates. • The material is carried by a table with seven rollers. These will driven by a hydraulic orbital motor through which the material can be placed precisely even under maximum load. • All guided movements are carried out by four recirculating ball guides with one high capacity for static and dynamic loading; strong reduced feed friction. Tempered and ground prismatic Guides. Price on request.

Condition: new, 1000 mm 1000 mm 1200x1000 mm saw band length 11300 x 80 x 1,3 mm table height 790 mm band speed 14 - 60 m/min total power requirement 18 kW weight of the machine ca. 9,0 t Codpfx Ast Eacgjb Dohb dimensions 5,0 x 1,68 x 3,15 m The semi-automatic, hydraulic saws from the X-tech line offer the best Saw technology and best performance when cutting special steels • The electro-welded machine frame and the steel saw frame meet requirements all cutting needs and eliminate vibration and noise. • The chip conveyor is hydraulically driven and the speed is adjustable • All movements of the machine (saw frame, vice, feed, Saw band guides) are carried out thanks to modern linear guides with high static and dynamic load performance, which also has very low sliding friction to guarantee. • Another characteristic feature is the roles for the Positioning of the material by a hydraulic motor are driven. They move at right angles to the material, and thus allowing optimal clamping of the material. • Thanks to the height control of the saw band position, the operator can place the band in place near the top edge of the material. After the cut is finished, the tape automatically raised back to the previous position. Alternatively you can also “Remain” can be selected in the lower position. During the The software compares the cutting load with the cutting cycle Default. This means that the sawing system can be stopped in the event of irregularities become. • The saw band is cleaned by two adjustable steel brushes. The drive takes place hydraulically. • The hydraulic unit including filter and pressure gauge guarantees one particularly quiet operation at constant pressure. • Finely ground carbide inserts that clamp the saw blade, complete with lateral, hardened and adjustable guide rollers. The adjustable one The tape guide automatically moves as close as possible to the material. • The saw band is tensioned via a hydraulic cylinder, which is carried out by the Machine software is controlled. The voltage is set according to a given Time automatically delimbed when the machine is idle or after a cycle has been carried out. • Automatic version with CNC control in the X-TECH 900 / 1200 models a feed length of 500 mm for the series for high production rates. • The material is carried by a table with seven rollers. These will driven by a hydraulic orbital motor through which the material can be placed precisely even under maximum load. • All guided movements are carried out by four recirculating ball guides with one high capacity for static and dynamic loading; strong reduced feed friction. Tempered and ground prismatic Guides. Price on request.