Used Fruit Processing for sale (20,719)

Condition: used, Microcutter Inotec I 225CD 110D This Inotec microcutter is a highly versatile machine, commonly used in the sausage and pet food industries. This inline cutter processes large quantities of product at high speed, producing a homogeneous mass while effectively mixing the ingredients simultaneously. The settings can be adjusted from coarse cutting to fine emulsions. The cutter is equipped with a large feed hopper positioned at a convenient working height. This allows the product to be easily fed into the machine, directly from a bowl cutter if required. The emulsifier is suitable for inline installation. The cutting set can be easily installed and removed. The cutting set experiences minimal wear, ensuring a long service life. Temperature sensors help maintain consistent product quality. The intuitive control panel allows for easy program configuration. The machine is mobile and can be moved as required. Technical specifications: Cedpfxjzwvxhe Ab Dshb Production capacity: 6,000–15,000 kg/h (depending on the product) Hopper capacity: 200 L Cutting plate diameter: 225 mm Hopper feed height: 890 mm Voltage: 400 V (3 + N, 50 Hz) Power: 127 kW Weight: 1,000 kg Year of manufacture: 2009 Machine dimensions (W x D x H): 1,200 x 2,250 x 1,300 mm

Condition: excellent (used), Year of construction: 2019, operating hours: 40 h, functionality: fully functional, machine/vehicle number: MCH-D 150, total length: 2,000 mm, total width: 1,000 mm, total height: 1,000 mm, overall weight: 2,000 kg, input voltage: 400 V, type of input current: three-phase, power: 55 kW (74.78 HP), input current: 55 A, input frequency: 50 Hz, Equipment: documentation/manual, MICROCUTTER EMULSIFIER SUITABLE TO CREATE FINE CHOP AND EMULSIFIED MIXES : MEAT EMULSIONS Chodpjzrfg Refx Ab Dob SAUSAGE AND WURST EMULSIONS LIVER PATE MARINADES AND SAUCES FRUIT AND VEGETABLE PUREE'S SOUPS

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, GAROS MDF 5600K Chodpfxerzqzuj Ab Djb ID.NO. 2689 Garos MDF 5600K Vacuum tumbler / Massage tumbler with cooling function. Capacity 5600 liters built-in vacuum pump & associated filling funnel included. Dimensions 520 x 210 cm Height 280 cm.

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, AMTEK AMT7510U ID.NO. 2801 Codpeumbw Ijfx Ab Dehb Amtek mod AMT7510U Microwave / Fry / oven year mod 2010 very nice condition! High capacity defrosts products from the core outwards, it is also possible to fry & cook products with this machine bandwidth 600 mm. Dimensions 1000 x 140 cm Height 200 cm.

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, TIPPER TIE SAM3E ID.NO. 2826 Tipper Tie mod SAM3E double clipper year mod 1995 with revolver system for quick change of format tubes. Chodpfx Asu Iw R Iob Djb Dimensions 210 x 115 cm Height 200 cm.

Condition: excellent (used), WOLFKING TSM 400 + DANFOTECH ID.NO. 2842 Wolfking TSM 400 liter paddle mixer with cooling Co2 with associated Danfotech CH 300 meatbin lift. Dimensions 200 x 165 cm Height 270 cm. Cedpju Ivwtjfx Ab Dohb Height to edge 150 cm.

Condition: like new (used), Year of construction: 2014, functionality: fully functional, GAROS GSI 620 CWP ID.NO. 2880 Garos mod GSI 620 CWP Saltinjector with built-in tenderizer & associated purification plant. Year mod 2014, 4 mm needles width bridge 63 cm. Dimensions 300 x 220 cm Height 225 cm. Chodpfxjvpvlps Ab Dob

Condition: used, Handtmann VF 610 Vacuum Filler The Handtmann VF 610 vacuum filler is the ideal solution for the precise filling, portioning, and linking of food products. These filling machines are widely used in various industries, including bakeries, butcher shops, convenience food, snacks, salads, cheese, fruit and vegetables, processed meat products, fish, vegan and vegetarian products, baby food, and pet food. The fillers are robustly constructed and comply with the strictest standards and requirements applicable in the modern food processing industry. Thanks to the intuitive touchscreen control, different programs can be easily set. The filler can be equipped with various auxiliary machines, including clippers, forming machines, and diaphragms. This filling machine is entirely made of stainless steel. Technical specifications: - Production capacity: 3,000 kg/h - Functions: filling, portioning, linking - Portion size: 5 g – 100,000 g - Number of portions: up to 450 portions/min - Filling pressure: 50 bar - Hopper capacity: 40 L / 100 L - Integrated vacuum system: Busch 16 m³/h - Equipped with: linking mechanism (34-5) - Voltage: 400 V (3 + N, 50 Hz) Chsdpfx Abozwlwgj Dob - Power: 3.5 kW - Year of manufacture: 2005 - Weight: 480 kg - Machine dimensions (W x D x H): 1,070 x 950 x 1,750 mm

Condition: used, Vacuum Filler Handtmann VF 300 3 The Handtmann VF 300 vacuum filler is the ideal solution for precise filling, portioning, and linking of food products. These filling machines are widely used in various industries, including bakeries, butcher shops, convenience food production, snacks, salads, cheese, fruit and vegetables, processed meat products, fish, vegan and vegetarian products, baby food, and pet food. The fillers are robustly constructed and comply with the strictest standards and requirements applicable in the modern food processing industry. Thanks to the intuitive touch-button control, different programs can be easily set. The filler can be equipped with various auxiliary machines, including clippers, forming machines, and diaphragms. The machine is equipped with a standard container lift for 200 L containers. Cedpfx Abjzwlpio Dohb The filling machine is entirely made of stainless steel. Technical specifications: - Production capacity: 10,000 kg/h - Functions: filling, portioning Portion size: 5 g – 100,000 g Number of portions: up to 500 portions/min Filling pressure: 35 bar Hopper capacity: 90 / 240 L Voltage: 380 V (3 + N, 50 Hz) Power: 9.5 kW Weight: 1,302 kg Dimensions (W x D x H): 2,000 x 1,350 x 2,060 mm

Condition: like new (used), Quantity: 2 2x WEBER DS 88 - 17D complete original processing units Complete conversion kit from the old degassing position to the upstream degassing position - suitable for PVC window recipes, dryblend processing - Enlarged preheating zone - all parts unused in original packaging Csdpfx Ajt H Rrzsb Dehb Location: Pirmasens We will be happy to send you further information on request.

Condition: excellent (used), Year of construction: 2018, 1 x Zumex Food Engineering juice extraction and flitration system with elevator and squeezing kits. Manufactured completely in stainless steel. Technical specification ⚙️: ✅ Manufacturer - Zumex Food Engineering ✅ Model - Z450. ✅ Date of manufacture - 2018. ✅ Hopper capacity - 40 kg.  Performance Specification ⚙️: ✅ Sizes 9-10-11: Heat unit - Kit 9, Oranges/minute - 150.35, Output capacity - 902.4 kg/h, Litres/minute - 6.01 L/min, Litres/hour - 360.84 L/hr. ✅ Sizes 5-6-7-8: Heat unit - Kit 8, Oranges/minute - 133.68, Output capacity - 1145.4 kg/h, Litres/minute - 7.64 L/min, Litres/hour - 458.22 L/hr. Codpfx Ajt Uircob Djhb ✅ Sizes 2-3-4: Heat unit - Kit 7, Oranges/minute - 116.94, Output capacity - 2338.8 kg/h, Litres/minute - 15.59 L/min, Litres/hour - 935.53 L/hr. PLEASE NOTE - Estimated calculations with a 40% juice performance of the oranges. FRUIT DIAMETER: Minimum:Ø55mm, Maximum:Ø100mm NET/GROSS:  750/960KG DIMENSIONS (L x W x H):  2.5 x 1 x 2.2m CONSUMPTION:  2.010W VOLTAGE: 380 V / 50-60 Hz / 3 phase.

Condition: ready for operation (used), functionality: fully functional, Industrial meat slicing machine for boneless meat The EBAKI 1 V horizontal slicer provides consistent cutting of boneless meats. It is particularly suitable for the poultry industry, but can also process pork, beef, turkey, or certain processed meats. This allows for obtaining multiple fillets or slices parallel to each other from a single piece of meat. This technology meets the needs of cutting workshops, meat processing companies, and manufacturers of processed products. Furthermore, horizontal cutting provides a more consistent thickness while improving the presentation of the finished product. Precise horizontal cutting The product moves between a lower conveyor belt and an upper conveyor belt. These two conveyors hold the meat in place as it passes through the cutting area. Then, the blades perform an alternating movement in opposite directions. This ensures that the product remains stable and the resulting fillets are consistent and parallel. This system also minimizes material loss during cutting. Consequently, it helps to better utilize the meat and standardize portions. Diverse applications The EBAKI range can perform horizontal slicing of chicken breasts, turkey, beef, pork, sausages, or bacon. The manufacturer also offers applications for cordon bleu, cooked chicken breasts, and certain extra-thin cuts. Thanks to this versatility, the machine can be integrated into various production lines. It can be used after the preparation or trimming of the meat. Then, the fillets can be transferred to a marinating, cooking, coating, packaging, or freezing line. Cleaning and production integration The EBAKI design provides easy access to the cutting elements and conveyors. In this range, guides and belts can be disassembled without tools to simplify cleaning and maintenance. The EBAKI horizontal slicer is therefore a suitable solution for companies seeking consistent cutting, better utilization of raw materials, and more homogeneous production. Chjdpfx Abozv N Rzs Dob Technical specifications: Brand: EBAKI Model: 1 V Type: Horizontal slicer for boneless meat Year: 2022 Serial number: 22 234 12 20 Power: 1.5 kW Voltage: 400 V Power supply: 3 phases + neutral + ground Frequency: 50–60 Hz Current: 5 A Weight: 460 kg L4MFJ3V6

Condition: new, Year of construction: 2026, functionality: fully functional, Plastic processing line/installation or stand-alone machines for various applications. 1) Single-shaft shredder/mono-rotor shredder (various sizes), 18.5 kW or 30 kW 2) Conveyor belt with head pulley magnet or discharge screw, discharge height 2 meters 3) Grinding mill/crusher, 1000 series, 45 kW 4) Discharge system with silo/cyclone, blower, and big bag system/frame, and double outlet (stainless steel), outlet height 2.3 meters. In stock, viewing and testing possible by appointment. Machines and equipment can also be purchased separately. Call us or send an email. Chjdszv S Hrepfx Ab Dob For information: Please include your first name, last name, company name, and valid phone number in all requests.

Condition: new, Semi-automatic chamfering machine Developed and manufactured in England - Automatic chuck with material sensor - Automatic spindle start when the cutting head moves - Bar diameter 26-105 mm A second cutting head is required for smaller diameters - Adjustable bar support Chedjgkah Tspfx Ab Dob - Max. chamfering/turning length 45 mm - Turning and chamfering tool - Precision three-jaw chuck - Large chip collection container for easy cleaning - Can be easily moved with a pallet truck - Weight approx. 500 kg Dimensions L/W/H 800x500x1250 mm 1 year warranty CE certified OPTION: - Adjustable stop + universal chamfering tool €1,990,-

Condition: used, Year of construction: 2019, Holz-Her Dynestic 7532 10.5 automatic CNC nesting machining center with Holz-Her Store-Master 5110 panel storage system Used machine Year of manufacture: 2019 Features and Technical Specifications: - Designed for classic nesting machining with a wear plate - Welded machine frame with ground and hardened prismatic guides for the traveling column, toolhead, and consoles - Gantry-style moving column - Rack-and-pinion drive, helical teeth, in the X and Y directions; ball screws in the Z direction for precise positioning - Machining dimensions: - Max. support area on nesting table: X = 3100 mm Y = 1560 mm - Max. travel ranges: X = 4695 mm Y = 2100 mm Z = 293 mm - Max. clearance height of DYNESTIC table Z = 100 mm from top edge of table (without wear plate) - Maximum programmable speed Vector speed: 128 m/min X = 80 m/min, Y = 100 m/min, Z = 25 m/min - DYNESTIC table: - Rigid, continuous machining table with grid markings - continuous slots in the X and Y directions - Slot spacing: 50 mm - Includes 25 meters of sealing cord for securing the wear plate - Vacuum fields: 1-circuit vacuum system - Drilling unit 7877: - 19 spindles - Drive power: 1.7 kW - 13 vertical spindles: - individually controllable - U-shaped arrangement - 5 in the X direction and 4 in the Y direction - 32 mm pitch - max. drill bit diameter: 35 mm - Total drill length: 70 mm from the mounting end (depending on panel thickness) - Spindle extension stroke: 70 mm - Rotation direction: Alternating clockwise and counterclockwise - n(max): 1000–4400 rpm, continuously adjustable - Mounting: M10 thread – 11 mm interference fit - Tool-free, without mounting adapter - 6 horizontal spindles: - 2 double drilling spindles in the X direction - 1 double drilling spindle in the Y direction - Mounting: M 10 thread, 11 mm interference fit - Total drill length: max. 63 mm from mounting end - Tool-free, without chuck - Milling unit 7842: - Power: 12.0 kW (S6) - n(max) = 1,000–24,000 rpm, continuously variable - Max. power at 12,000 rpm to 24,000 rpm - Air-cooled - With HSK-F 63 tool holder - With right-hand threaded nut (for right-hand rotating tools) Chjdpfx Abszlbrpe Djb - With collet chuck with HSK shank - Ceramic ball bearings (hybrid bearings) - Max. tool weight: 6 kg (including holder) - Tools: Milling and grinding tools, max. Ø 160 mm - Safety guarding in accordance with CE standards - Protective fencing on the sides and rear - Vacuum pump: 500 m³/h, dry-running - Operator safety via light curtains in the front area of the machine - Handheld control unit for remote control of the machine with the following operating functions: - Start/Stop of the machining program - Speed control of the machining cycles - Reset button - Manual feed/rapid traverse for all axes - Emergency Stop - CAMPUS V7 CAD/CAM software, 1 machine license consisting of: - CAMPUS NC-HOPS: - Graphical variant system with WOP and CAD/CAM features for creating part variants using macro technology - CAMPUS MT-Manager - CAMPUS Workcenter - CAMPUS DXF interface - Automatic centralized lubrication - Automatic lubrication according to defined lubrication intervals - Additional dust sealing via positive pressure in each guide carriage - Simultaneous lubrication: - for all linear guides in the X, Y, and Z directions - for all ball screws in the Y and Z di...

Condition: used, Year of construction: 2019, Second-hand machine Year of manufacture: 2019 Only 110 operating hours! Features and technical specifications: Machining paths: - X = 1800 mm - Y = 900 mm - Z = 80 mm Made from 18 mm Koskisen boards Chodpfozk Npgjx Ab Dsb Milling bed made from 19 mm MDF as a sacrificial plate with guide rails and slot blocks, used as a clamping method. Base frame with bracing, cast in polymer concrete, prepared for transport by pallet truck or forklift. Mechanical kit comprising profile guides including guide carriages, as well as ball screws 2010 and 1605 for all axes. Shaft couplings and high-performance grease for lubricating the individual carriages, as well as energy chains including connection sets. Control kit comprising a Triple Beast for controlling 3 axes, with an Ethernet connection. Leadshine driver board for the fourth motor. Four stepper motors, 5.0 A, 3 Nm, with motor cables, plus a switching power supply rated at 48 V, 6.7 A, LED board for breakout board, ribbon cable and proximity sensors, small parts such as wires, wire end ferrules, control cable, heat-shrink tubing and cable lugs. Fully installed in an aluminium housing, including electrical kit and emergency stop. - 21.5-inch monitor as a built-in display, including a mini PC with Windows 7, Rhino 5.0 CAD software, Estlcam G-code generator, Beamicon2 control software, as well as a mouse and keyboard, pre-installed in an ergonomic console. Tool length sensor for determining the length and adjusting the active zero-point offset. Optional extras: - High-frequency spindle with 2.2 kW, including union nut, frequency converter, mains filter, braking resistor and collet set. - PC with 8 GB RAM and AMD processor - Rhino 5.0 CAD software for creating both simple 2D data and 3D solid models Availability: at short notice Storage location: Flörsheim

Condition: excellent (used), functionality: fully functional, total length: 1,205 mm, total width: 1,000 mm, total height: 1,890 mm, REF: MM6147 30 x Stainless-steel hanging racks for curing meat, previously used for hanging chorizo. These racks can be stacked one on top of each other. Overall dimensions - 1205mm long x 1000mm wide x 1890mm high.  Csdex Tg Axepfx Ab Dshb

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, 1 x N&N Nadratowski / Orbmix twin-shaft mixer grinder with tote bin tipper/column loader. Supplied with various hole plates. Suitable for a variety of products including meat, poultry, fish, vegetables, petfood, sandwich fillings, etc. Manufacturer - N&N Nadratowski. Model - MG-450/160. Date of manufacture - 2011. Mixing capacity - 450 litres (approx 350 litres of product). Output - up to 2,000 kg/h, depending on product. Electric supply - 400 V / 50 hz / 3 phase. Power - 24 kW. Chodpfxjwplc Ae Ab Djb Weight - 1530 kg (mixer grinder) and 282 kg (column loader). Previous use - for mixing and grinding a poultry and vegetable mixed product.

Condition: used, Year of construction: 2011, Edge processing line HOMAG, consisting of: - Infeed system for longitudinal and transverse parts - One HOMAG edge banding machine with LASER GLUING - Transfer station for longitudinal and transverse output - Return conveyor for automatic circulation Pos. 1 Vacuum infeed system TBP 410 Max. workpiece size 2,800 x 1,200 x 40 mm Max. workpiece weight 50 kg Small parts down to min. 250 x 85 mm (longitudinal and transverse) Narrow parts 2,800 x 69 mm (longitudinal only) Servo-controlled lifting drive for max. 18 cycles/minute With servo-controlled rotary device -90/+180 degrees Pos. 2 Single-sided laser edge banding machine HOMAG KFL610/21/PU/L/25/SI14 For automatic 4-sided processing in 4 passes With SI 14 feeding system for automatic feeding of longitudinal and transverse parts Equipment: - Release agent application top and bottom - Trimming cutters 4.5 KW / Double-trimming cutter 2 x 6.6 KW - Stepless axis adjustment vertical and horizontal - Mortising unit 2 x 4 KW - LASERTAC activation unit 3 KW / optionally PU gluing - Max. edge thickness 3 mm - 24-position roller magazine with servo-controlled edge feeding - Release agent spray device top/bottom - Trimming unit bevel/straight HL 84 / 0.8 KW with 2 motors - Pre-milling unit with 2 motors, each 1.5 KW (pneumatically adjustable to 2 positions) - Release agent spray device top - Profile milling unit FK 23 with 2x8-position tool changer for 20 cycles/minute - Multi-scraper unit MN 21 automatic - Finishing unit FA 11 top/bottom (flat scraper and buffing unit) - Milling unit with 6.6 KW motor, pivotable 90 degrees, stepless axis adjustment vertical and horizontal. With HSK 63 F tool holder - Machine is designed for tool changes in the gap Pos. 3 Workpiece return with chain lifting buffer To decouple processing machines by temporarily buffering. Return via approx. 6 belt conveyors Pos. 4 Vacuum transfer device TBP 410 Max. workpiece weight 50 kg Chedszvmx Ajpfx Ab Dsb Small parts down to min. 250 x 85 mm (longitudinal and transverse) Narrow parts 2,800 x 69 mm (longitudinal only) Servo-controlled lifting drive for max. 18 cycles/minute With servo-controlled rotary device -90/+180 degrees

Condition: excellent (used), Year of construction: 2008, operating hours: 86,100 h, functionality: fully functional, machine/vehicle number: 992793, type of input current: three-phase, overall weight: 22,000 kg, space requirement length: 9,500 mm, space requirement height: 3,000 mm, space requirement width: 9,100 mm, total length: 9,500 mm, total height: 2,300 mm, total width: 9,100 mm, For sale is a complete, automated Salvagnini P4 press brake system with a robot for the automatic stacking of manufactured sheet metal parts, 3 pallet positions, and an integrated conveyor system. This system is ideally suited for efficient and automated sheet metal manufacturing, enabling the processing and subsequent sorting or stacking of the manufactured components with minimal manual effort. Equipment: Salvagnini P4 press brake Automatic bending/edging of sheet metal parts Robot for automatic stacking of finished workpieces 3 pallet positions for flexible storage and sorting Integrated conveyor system for automated material and part transport High degree of automation Efficient manufacturing with reduced manual handling High repeatability and reproducible manufacturing quality Ideal for series production as well as flexible small-batch production Bending length: 1916 mm The bending die was renewed in mid-2024. The robot’s suction frame (OPA16S) was renewed in 2025. The combination of the P4 press brake, automatic stacking, three pallet positions, and conveyor system offers a powerful complete solution for automated sheet metal processing. Machine: Salvagnini P4 Equipment: Robot stacking / 3 pallet positions / conveyor system Year of manufacture: 2008 Operating hours: 86,100 Condition: used – very good Location: 54576 Hillesheim Chjdpjzxhgyefx Ab Deb Inspection and test run possible by arrangement. The machine is currently still in use in production. If required, a video of the machine during production can be sent. Price and further technical details upon request.

Condition: new, CNC machine Manufacturer: Comec Type: MD JAMB New machine 3 machining supports for cutting to miter angles, milling recesses for corner connectors, and door lock plates. A complete door frame element with decorative trim and rabbet trim is machined in a single clamping operation. This allows a complete door frame to be machined in approximately 2.5 to 3 minutes. The machining equipment can be individually adapted to customer requirements. Quick search Cedpfx Aszvfl Iob Dehb Offer machines Sign up for newsletter Unsubscribe from newsletter Contact us Overview

Condition: like new (used), Year of construction: 2023, Huber CS 550 OD Cooling Unit / Chiller Manufacturer: Peter Huber Kältemaschinenbau SE Type: CS 550 OD Year of Manufacture: 11/2023 Machine Type: Cooling Unit / Chiller / Process Cooler Cooling Capacity: 55 kW at +10 °C supply / +50 °C return temperature For sale is a like-new Huber CS 550 OD chiller with an air-cooled cooling unit and circulation pump. The unit has not yet been used. The system is suitable for industrial process cooling, machine cooling, chilled water supply, and temperature control applications. The special design is suitable for outdoor installation and winter operation. Technical Data: Model: CS 550 OD Item No.: 32-100110 Year of Manufacture: 11/2023 Temperature Range: -20 to +85 °C Internal Temperature Sensor: Pt100 Temperature Stability at -10 °C: 2 K Interface: RS232 Safety Class: I / NFL Heating Capacity: 17 kW Power Connection: 400 VAC / 50 Hz / 3Ph+N+PE Power Consumption: 27.5 kW Max. Current Consumption: 52 A Refrigerant: R449A Refrigerant Quantity: max. 23 kg Max. Operating Pressure: 28 bar Made in Germany Cooling Capacity: According to the nameplate: 55 kW at +10 °C supply / +50 °C return temperature At 20 °C ambient temperature: +15 °C: 70 kW +10 °C: 60 kW 0 °C: 33 kW -10 °C: 20 kW -20 °C: 12 kW Circulation Pump: Pump: CM5-4 Max. Flow Rate: 125 l/min Max. Head: 4.0 bar Pump Connection: G1 male Min. Filling Volume: 160 l Low-Level Alarm: 175 l Max. Filling Volume: 195 l Dimensions: External Dimensions (W × D × H): approx. 1,400 × 1,000 × 1,800 mm Net Weight: approx. 715 kg Sound Pressure Level: 79 dB(A) ± 4 dB(A) Equipment: Air-cooled cooling unit Circulation pump Housing and tank made of stainless steel Copper-brazed evaporator Digital level indicator High-efficiency fan motor Feed pump with over-temperature protection Manual bypass valve Control unit B400 / RB400 Capacitive user interface with OLED display Multi-color status indicator RS232 interface Separate operating/control panel Connection/connecting cables as shown in the pictures Temperature control/connecting hoses as shown in the pictures Connecting fittings as shown in the pictures Electrical components IP54 Outdoor installation / winter operation up to -20 °C Max. Ambient Temperature +50 °C Mobile unit housing Additional accessories as shown in the pictures Transport Data: Unit dimensions: approx. 1,400 × 1,000 × 1,800 mm Net weight: approx. 715 kg Wooden transport crate available. Shipping via freight forwarder possible. Condition: Like new / not yet in use. Year of Manufacture: 11/2023 Optical condition as shown in the pictures. Chjdezt Iqzspfx Ab Deb Accessories partially in original packaging or in accessory boxes. Scope of Delivery: 1 × Huber CS 550 OD Cooling Unit / Chiller 1 × separate operating/control panel Connection/connecting cables as shown in the pictures Temperature control/connecting hoses as shown in the pictures Connecting fittings as shown in the pictures Several Huber accessories as shown in the pictures 3 × accessory boxes with contents as shown Additional accessories as shown in the pictures Wooden transport crate Availability: by arrangement. Scope of delivery as shown. Subject to change, errors and prior sale.

Condition: used, Year of construction: 2005, Second-hand machine Year of manufacture: 2005 Features and technical specifications: - Base machine 555 - Machining dimensions for contour milling: - X = 3514 mm - Y = 1544 mm - Maximum machining dimensions: Cjdjzk N Hlepfx Ab Dshb - X = 3868 mm - Y = 1746 mm - Z = 325 mm - Workpiece support with 8 brackets, pneumatically clamped - Drilling unit 7968: - 18 vertical drilling spindles with 32 mm pitch - 12 in the X-axis and 6 in the Y-axis - available individually - T-shaped layout - max. drilling diameter 35 mm (depending on panel thickness) - Spindle extension stroke: 70 mm - Direction of rotation: alternating clockwise and anti-clockwise - n = 4725 rpm, infinitely variable - 2 horizontal drilling units in the X-direction, 1 horizontal drilling unit in the Y-direction - Sawing unit 7946: - Motor: 3.5 kW - 90° pneumatically swivelling - n = 5300 rpm - Tool holder A Ø = 200 mm, I Ø = 30 mm, B = max. 3.5 mm - Sawing/grooving in the X and Y directions - Milling unit 7935: - with 6 kW spindle, water-cooled - Milling unit 7982: - for lock case milling - Tool changer 7996: - 18-position magazine (turret) - Vacuum pump with a capacity of 140 m³/h - Handheld control unit - PC control system with TwinCAM WOP system - Siemens control system Availability: at short notice Storage location: 63934 Röllbach

Condition: used, Year of construction: 2005, Second-hand machine Year of manufacture: 2005 Features and technical specifications: - Cantilever machine (6 units) - Travel dimensions: X = 3,490 mm Y = 1,690 mm Z = 205 mm - Machining dimensions: X = 3050 mm Y = (Max. milling depth – tool radius) 1,345 mm Z = 150 mm - TF 20 drilling head - Power 2.2 kW - 8 vertical spindles, spindle spacing 32 mm in the X direction - 6 vertical spindles, spindle spacing 32 mm in the Y-axis - 2+2 horizontal spindles in the X-axis - 1+1 horizontal spindles in Y-axis - with integrated 120 mm grooving saw blade - with 9.2 kW electric milling spindle with ISO 30 mount - with C-axis - with angle unit - with 12-position tool changer - with tool change station for angle units - with vacuum pump 80–100 m³/h - Total connected load 16 kW - Compressed air 6 bar - Compressed air consumption 210 NL/m - Extraction connection 250 mm - Extraction volume 5,300 m³/h Csdpfx Abszk Nz Ao Dehb - Extraction velocity 30 m/sec - Dimensions: 5940 x 3800 x 2510 mm - Weight: 3,700 kg Availability: at short notice Location: 63934 Röllbach

Condition: used, Year of construction: 2014, Used Machine Year of Manufacture: 2014 Features and Technical Specifications: - X-axis working range: 3,740 mm - Y-axis working range: 1,570 mm Chsdszlbp Uepfx Ab Djb - Z-axis travel: 350 mm - 4th axis: available - 5th axis: 5-axis spindle, 12 kW motor - with additional locking mechanism for the C-axis - Tool change stations: 24 with turret changer; 10 on the left side of the machine column - Vertical drilling spindles: 12 - Machine table: cantilever table - Automatic table positioning: available - 6 e-motion workpiece supports - Special workpiece clamping system for frames - Software: FORMAT 4 WOOD FLASH, TPA ALBATROS - 2 machining areas for alternating setup - With automatic central lubrication - With mobile control console featuring a PC monitor - With air conditioning for the control cabinet - With a 90 m³/h vacuum pump - With handheld control unit - Includes: 12 frame clamps, 8 large and 4 medium suction cups