Used Veneers Process for sale (21,621)

Year of construction: 2003, condition: excellent (used), BCD Stainless Steel Process Tank Capacity 1500 |Ltr 316 Stainless Steel Iodpfxez E Inzo Am Dsih Bevelled bottom Drian with leaver closer

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, total length: 14,000 mm, total width: 4,500 mm, total height: 2,900 mm, overall weight: 12,000 kg, input voltage: 415 V, track width: 80 mm, input current: 70 A, input frequency: 50 Hz, Complete 2010 Rademaker Pie Line, capable of producing up to 5,280 filled savoury pies (with lids) per hour. Manufacturer - Rademaker B.V. Model - PIE LINE. Maximum mechanical speed – up to 22 strokes / minute. Output capacity – up to 5,280 pies / hour. Working width – 800mm wide. Electrical requirements – 415 V / 50 hz / 3 phase. Power – 70 Amps (approx.). Weight of complete line – 12,000 kg. Overall footprint – 14m long x 4.5m wide (including return conveyor) x 2.9m high. Line maximum width – 2.2m at widest point. This production line comprises of the following equipment/machinery: 1. 2 X sets of tooling complete with trollies – 1 X set for 4-across pies with casing diameter of 110mm and 1 X set for 3-across ‘family-style’ pies with casing diameter of 180mm. 2. Electrical control panel (with data plate ‘PIE LINE’ on). 3. Inclined flighted conveyor for loading of pastry sheets. 4. Overhead transfer conveyor (used to feed 'STRIPFEEDER') operating at 2.4m high along the length of the line. 5. Rademaker ‘STRIPFEEDER’ with denester for dropping pie cases. Ijdozvmy Hopfx Am Djih 5a. Rademaker Flour Sifter. 6. Rademaker Tamping unit (used to press / tamp the dough round into the pie casing). 7. Rademaker ‘DEPOSITOR’ 6-lane depositing system with hopper and pump. 8. Rademaker ‘SPRAYING DEVICE’. 9. Rademaker ‘LID DOUGH CONVEYOR’ for dropping lids onto filled pies. 10. Dutch Thermal Engineering b.v. (DTE) V-009.0 thermostat for regulating temperature of water bath sat under main conveyor holding pie casings. 11. Rademaker Press / Crimping unit / Marking unit for putting pattern into casing lid and ensuring it is secured onto pie. 12. Rademaker Pie Exit/Discharge conveyor. 13. Rademaker ‘DOUGH RETURN SYSTEM’ for excess pastry. 14. Rademaker ‘SPOT DEPOSITOR’ for 5-across over line depositing. 15. Unnamed egg-glaze mixing vessel and pump, mounted on mobile frame. CONDITION - Requires some reconditioning before entering production. NOTES – BUYER TO REMOVE FROM SITE.

Year of construction: 2012, operating hours: 4,000 h, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 363/15862010, The rotary bed dryer WB-T (model 1.00 / 3.00) from Allgaier Process Technology GmbH is a specialized industrial plant for the continuous, uniform, and gentle drying of bulk materials and biomass. In process engineering, the model designation (1.00 / 3.00) typically refers to the dimensions of the drying area, i.e., a bed width of 1.00 meter and a bed length of 3.00 meters. The heating capacity is 250 kW and is powered by electricity. Typical applications: • Biofuels & wood industry: Drying of wood chips, sawdust, and bark for pellet production. • Waste management • Agricultural & recycling industry: Processing of fermentation residues (from biogas plants), green waste, sugar beet pulp, or bagasse. Operating principle: The technology combines the process engineering advantages of a drum dryer with those of a fluidized bed dryer: • Rotary bed mechanism: The wet product lies inside on a perforated flow bed (perforated sheet). A targeted mechanical movement or tumbling in combination with the airflow creates a rotating or rolling product movement ("rotary bed"). • Counter-current or cross-current ventilation: The drying air is blown from below through the sieve bed and flows intensively through the tumbling product. This ensures an optimal heat and mass exchange. Main features & advantages: • Low-temperature drying: The plant is ideally designed for operation with waste heat or low-temperature heat sources (e.g., from combined heat and power plants/CHP or industrial residual energy). • Long residence time: This enables particularly gentle dewatering of the material while simultaneously ensuring high homogeneity of the residual moisture. • Robust particle processing: In contrast to pure fluidized beds, large, irregular, or sticky particles can also be processed economically. • Integrated screening: The flow effectively reduces fine dust and sand content during the process. Isdpfxjz Rz Dne Am Dsih

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, REF: MM6419 1 x Carnitech twin-lane pin-bone removing and packing line. This machine is designed for removing pin-bones ensure a high product quality and helps to achieve a maximum yield at shorter time. Head end first and skin side down, the salmon fillets are conveyed to the pin-bone head on a pvc belt. Carnitech pin-bone removers treat the fillets very gently. This system is suitable for processing both salmon and trout. Manufacturer - Carnitech A/S. Type - CT 2612. Pin-Boner Date of manufacture - 2000 (refurbished approx 2 years ago). Ijdpfx Aey Swi Hsm Deih Packing Line Date of manufacture - 2023/24. Capacity / Output - up to 36 fillets / minute (was only being run at 10 fillers / minute). Size of fillet - between 0.5 kg up to 4 kg. Video available on request.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, 1 x Tsunezawa Group automatic filleting machine that can be operated by 1 person. This is a specialised, high-efficiency filleting machine designed for salmon processing, specifically to remove the belly bones while producing a three-piece fillet (three-way filleting). Manufacturer - Tsunezawa Group Co., Ltd. Model - TAF-BG Filleting Machine. Date of manufacture – 2019. Throughput – 20 to 30 fish / minute, depending on fish size. Processing capability – can handle fresh salmon and thawed salmon down to -4C. Electrical requirements – 400 V / 50 hz / 3 phase. Power consumption – 3.45 kW. Overall dimensions - 2300mm long x 1550mm wide x 1800mm high. Weight – 1,000 kg (approx.). Iisdpfx Ajy Rimzjm Dsh Condition – Very good - last used for production in summer 2025. Supplied with User Manual and spare knives.

Condition: used, Year of construction: 2002, functionality: fully functional, REF: MM6296 1 x Offshell Services Ltd twin-lane shellfish peeling machine with 2 x Podmores feeding hoppers. Iiedpfxexuhw Ds Am Deh Technical specification ⚙️ ✅ Manufacturer – Offshell Services Ltd. ✅ Model – The Offshell Press MK V (Peeler). ✅ Date of manufacture - 2002. ✅ Configuration – Twin units mounted side-by-side. ✅ Construction – Stainless steel and aluminium frame. ✅ Power – 3-phase electric supply. ✅ Operation – Mechanical off-shell press for food processing applications. ✅ Condition – Used, average wear, complete with manual / electrical drawings. Decommissioned and packed for transport

Condition: excellent (used), functionality: fully functional, total length: 1,205 mm, total width: 1,000 mm, total height: 1,890 mm, REF: MM6147 30 x Stainless-steel hanging racks for curing meat, previously used for hanging chorizo. Ijdpfx Aex Tg Axem Deih These racks can be stacked one on top of each other. Overall dimensions - 1205mm long x 1000mm wide x 1890mm high. 

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, REF: MM5946 1 x DanTech UK Ltd 'Pig in Blanket' wrapping / rolling conveyor on mobile frame. Manufacturer - DanTech UK Ltd Model - PIB 400. Serial number - 8394. Date of manufacture - 2020. Ijdpfxsvw I Nij Am Doih Belt dimensions - wire mesh, 5650mm long x 400mm wide. Electric supply - 400 V / 50 hz / 3 phase.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, 1 x N&N Nadratowski / Orbmix twin-shaft mixer grinder with tote bin tipper/column loader. Supplied with various hole plates. Suitable for a variety of products including meat, poultry, fish, vegetables, petfood, sandwich fillings, etc. Manufacturer - N&N Nadratowski. Model - MG-450/160. Date of manufacture - 2011. Mixing capacity - 450 litres (approx 350 litres of product). Isdpfxewplc As Am Doih Output - up to 2,000 kg/h, depending on product. Electric supply - 400 V / 50 hz / 3 phase. Power - 24 kW. Weight - 1530 kg (mixer grinder) and 282 kg (column loader). Previous use - for mixing and grinding a poultry and vegetable mixed product.

Condition: used, Year of construction: 2020, total length: 3,000 mm, total width: 1,300 mm, total height: 1,900 mm, Veneer press Manufacturer: Stema S.r.L. Type: P – 90 C Ijdpfxoz Ip H Ro Am Djih Year of manufacture: 2020 Dimensions (l/w/h): 3,000 x 1,300 x 1,900 Weight: approx. 3,800 kg Pressing force / pressure: 70 – 90 t Purchase price (net): €16,000 plus applicable VAT. VAT will be shown separately on our invoice. Note: The equipment description is taken from the original purchase invoice and has not been checked for accuracy or completeness. Deviations are possible! Financing possible Upon request, we can arrange suitable financing through our company. Please do not hesitate to contact us. Subject to changes, errors and prior sale. Sale is made without guarantee or warranty and only to commercial businesses. Inquiries will be processed from Monday to Friday between 8 a.m. and 4 p.m.

Condition: used, Year of construction: 1969, machine/vehicle number: 5700, functionality: fully functional, ram plate width: 1,350 mm, ram plate length: 3,000 mm, year of last overhaul: 2011, This OTT veneer and carcass press impresses with its robust industrial design and an exceptionally large press format of 3,000 × 1,350 mm, featuring 2011 new heating plates. While many presses offer only a press width of 1,200 to 1,300 mm, this machine enables the processing of particularly large workpieces and special formats. A major advantage is the 2011 renewal of the heating plates by ELKOM, which significantly upgraded the press technically and ensures its continued reliable operation. The OTT press is ideally suited for carpentry workshops, joineries, interior fitters, as well as manufacturers of doors, stairs, and furniture. Thanks to its stable hydraulic construction, it offers uniform pressure distribution and is suitable for both veneer work and demanding gluing of solid wood and composite materials. Iiedpfx Aez Dq S Hem Deh

Year of construction: 2013, operating hours: 3,500 h, condition: used, functionality: fully functional, machine/vehicle number: 12400, TSM/tsi oscillating sieve machines are used for the classification, screening, and dust removal of bulk materials from almost all industrial sectors, such as stones and soils, chemicals, mining, pharmaceuticals, feed, and food. Iedpfx Aezmzbmem Doih The machine for sale has a diameter of 1200 mm and is equipped with 3 sieve decks with mesh sizes of 3 mm, 1.4 mm, and 0.463 mm. In addition, spare sieves with the following dimensions are included: • 16 mm x 1 piece • 15 mm x 1 piece • 0.5 mm x 1 piece • 0.16 mm x 1 piece • 0.9 mm x 1 piece • 0.86 mm x 1 piece The drive has a power of 1.5 kW, 400 VAC, 50 Hz, 1450 RPM. The machine was in operation at an R&D center in Israel. As the company now operates a production facility in Europe, the R&D center will be closed. The machines will be transported to Europe at the owner's expense and can be delivered EXW at a port or at the production facility in Europe. The details for optimal transport need to be clarified. The machine price does not include packaging on a pallet.

Condition: ready for operation (used), Year of construction: 2008, Version: T1-T1C-T5C-T6CN2, tool magazine: RACK T95, number of tool positions: 95, workpiece dimensions for parts longer than 3500mm: width: 50-140mm, thickness: 50-92mm, tool identification: chip, Balluff, extraction hoods: automatic movement for machining long parts, control: Siemens 840 D SL. Equipment: transport system, 1x motorized roller conveyor, 6000mm with pusher device. Loading system: motorized roller conveyor, length: 3880mm, with single pusher device, 2x motorized central structure, with driven belts, 3000x2000mm, speed: 15m/min, power: 0,37kW, 1x small motorized central structure, with driven belts, 1500x2000mm, speed: 15m/min, power: 0,37kW, 1x liftable roller conveyor, length: 3800mm, power: 0,37kW, 1x liftable roller conveyor, length: 2290mm, power: 0,37kW. Parking system: 1x motorized roller conveyor, length: 3070mm, with single pusher device, speed: 60m/min, power: 0,37kW, 1x motorized central structure with driven belts, double transport of parts, 4670x2000mm, speed: 15m/min, power: 0,37kW, 1x liftable roller conveyor, length: 2800mm, power: 0,37kW, 1x staircase, with documentation. An on-site inspection is possible. Ijdpszukq Tofx Am Djih

Condition: good (used), Year of construction: 1995, overall weight: 4,500 kg, High-quality veneer shears with 2 blades for optimal joint cutting. Isdpjzvvffofx Am Deih Maximum processing length: 2600 mm. CE marked.

Condition: like new (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: Zsk 119 mc+, type of input current: three-phase, total length: 11,000 mm, year of last overhaul: 2024, total width: 1,500 mm, total height: 1,500 mm, overall weight: 18,000 kg, Coperion extruder, 1200 hp (930 kW), 380 volts, 50 Hz. Designed for high-moisture extrusion (TVP or HMMA, high-moisture meat analogue), with an output of 1 to 10 tons/hour. Screw diameter: 2 x 118 mm; ABB inverter for the 1200 hp motor; liquid dosing system; solid dosing system; control panel. Also available: Urchel cutting device and rotary IQF freezer. This extruder can also be used for dry or wet pet food. Iijdozti Tkspfx Am Djh This equipment has very few operating hours.

Condition: used, Year of construction: 2012, axis stroke (X,Y,Z) 5.910,1.815,655 mm Number of spindle head vertical 14 St. Number of spindles head horizontal 4 St. main drive 12 kW tool taper HSK F63 Number of axles 5 St. Number of tools 20 St. working area 5005 x 1450 x 200 mm Number of working hours 3108 h Masterwood Project 455 L, 5-axis CNC machining center ----- Machine can be viewed while still in operation! Sold ex-site. Dismantling and reinstallation by experienced Masterwood technicians available as an option! The Masterwood Project 455 L is a highly flexible, numerically controlled 5-axis machining center featuring a robust gantry design. It has been specifically developed for the sophisticated, complete processing (drilling, milling, grooving) of solid wood, panel materials, windows, doors, and stairs. Thanks to its extended "L" configuration, the machine offers an exceptionally large working area for extra-long components. Summary of technical specifications: ----- Travel ranges: X = 5,910 mm, Y = 1,815 mm, Z = 655 mm Max. workpiece dimensions: length 5,005 mm, depth 1,450 mm, height 200 mm Max. axis speed: X = 80 m/min | Y = 80 m/min | Z = 25 m/min Work table system: "TUBELESS" (hose-free) work table with vacuum clamping system Number of table beams: 8 table beams (L-version) Positioning aids: 4 workpiece lifting devices (for heavy components) Stops: 8 rear stops, 8 intermediate stops, 1 side stop on each side (right/left) Vacuum pump Main spindle: ----- Milling spindle (main spindle): 12 kW, 5-axis spindle Spindle cooling system: Liquid circulation cooling (for maximum continuous load) Tool holder: HSK-F63 Iiedsz Hz Iwepfx Am Deh C-axis (rotation): Indexable by ± 360° Fixed drilling head: ----- Total spindles: 19 independent drilling spindles. • Vertical spindles: 7 in the X-direction, 7 in the Y-direction. • Horizontal spindles: 2 double spindles in the X-direction, 1 double spindle in the Y-direction. • Spindle spacing: 32 mm standard grid. • Integrated grooving saw: Saw unit in the X-direction, saw blade Ø 125 mm (4,000 rpm). Tool changing system ----- Carousel magazine: 16-position tool changer Additional positions: Linear tool changer with 4 positions on the machine bed for large-format tools (e.g., profile cutters or saw blades up to Ø 350 mm). Control System & Software ----- Hardware: High-performance PC-based control system with a Windows interface and a 17" color TFT monitor. Network: Integrated Ethernet card for easy online connectivity. Software Package: • MasterWork: Graphical programming system (CAD/CAM interface, DXF import, macros). • Master AT: Graphical setup aid for the optimal positioning of vacuum pods and support beams. Remote Maintenance: Equipped for "Teleservice On-Line" for direct online troubleshooting. Accessories: ----- Various vacuum clamping devices 4 solid wood clamps Veneer stops Selected tools as shown (available upon request) ----- Price for the above-mentioned machine available upon request! ----- Further Information:...

Condition: used, machine/vehicle number: 2001 5170, For sale is a KUPER FWJ 900 veneer assembly machine manufactured in Germany. The machine is in good, well-maintained used condition and is immediately ready for professional use in veneer processing. The FWJ 900 operates with glue threads and hot air and is suitable for assembling or joining veneer sheets. The machine has an overhang of 900 mm and is operated via a foot pedal. Technical data: Manufacturer: KUPER Type: FWJ 900 Machine number: 20015170 Overhang: 900 mm Iiedoz Ep R Rspfx Am Doh Process: Veneer assembly with glue threads Heating: Hot air Feed rate: approx. 7 m/min Veneer thickness: approx. 0.4–2.0 mm Operation: Foot pedal Stationary model Compressed air connection: available Includes a large work table in front of the machine Includes a work table behind the machine Inspection and functional testing possible while powered on The existing work tables offer a generous support area and are ideal for processing larger veneer sheets. The machine can be inspected on-site while powered on and its functionality can be tested.

Condition: used, Year of construction: 2021, Manufacturer : Brouillon Process Model: 884-H-EAU Year : 2021 Type : Off-axis tilting cooking vessel   Useful capacity : 400 L Material : 304 L stainless steel Isdpoygncljfx Am Dsih Diameter : 884 mm Operating pressure : 6 bar Maximum temperature: 110°C Double jacket volume: 32.5 L Mixer: 2 stainless steel anchors, each fitted with an inclined PTFE scraper Speed: 7 - 25 rpm Recycling loop on the double jacket for temperature control Flush drain valve at SMS76 outlet, electro-pneumatically controlled Stop cooking function / mains water cooling Total empty weight: 1200 kg

Condition: new, Unused Briggs of Burton approximately 1,200 litre 316/316L stainless steel process vessel. Unit measures approximately 1,200mm diameter x 870mm straight side. Unit has bolted dished top and welded hemispherical bottom head. Internal rated 10 bar/full vacuum design pressure at -20 to 210 deg.c. External 304/304L stainless steel jacketed rated 10 bar/full vacuum design pressure at -20 to 210 deg.c. Unit has top entry 316/316L stainless steel gate type agitator fitted with PTFE wall scrappers, driven by 11kw motor/gearbox. Unit includes bottom entry Silverson model BE600 316/316L stainless steel emulsifier driven by 22kw motor. Unit is mounted on 304/304L stainless steel legs. Iodpfeyhd Imex Am Doih Specifications: Power: 11 kW

Condition: used, Comprehensively tested, used Olsa Process Mixing Suite. This mixing suite comprises of: 2 off Olsa Pharmaceutical grade mirror polished 316 stainless steel vacuum mixer homogenising vessels.  Full hydraulic raise/lower with electrical panels, touchscreen PLC controls, CIP pumps, diaphragm product discharge pumps, both vessels on load cell system. Manuals/drawings included. Technical specification below for each main process vessel. Iiedpfsymaz Hox Am Dsh   Vessel 1 Gross capacity 266L, full scraped wall 2.2kw anchor mixer, contra rotating mixer 1.1kw, bottom entry high speed homogeniser 7.5kw.  Vessel rating 2.5bar plus full vacuum at 155 Degrees C.  Jacket 4.5bar 155 degrees C. CIP system.  150mm dia hinged chargeport with sight glass, vessel light.  Numerous top dish connections, vacuum pressure gauge, 30mm dia outlet.  Vessel dimensions 1.3m x 2m x 2.4m closed.   Vessel 2 Gross capacity 266L, full scraped wall 2.2kw anchor mixer, bottom entry high speed homogeniser 7.5kw.  Vessel rating 2.5bar plus full vacuum at 155 Degrees C.  Jacket 4.5bar 155 degrees C. CIP system.  150mm dia hinged chargeport with sight glass, vessel light.  Numerous top dish connections, vacuum pressure gauge, 30mm dia outlet.  Vessel dimensions 1.3m x 2m x 2.4m closed.

Condition: used, Year of construction: 2018, functionality: fully functional, tank capacity: 400 l, The 400L steam cooking kettle, designed by Process Agro, is ideal for food industry professionals looking to increase their production capacity. With its 400-liter capacity, it allows for quick and efficient cooking of a wide variety of products. The use of steam ensures even cooking while preserving the flavor and texture of the ingredients. This kettle is therefore ideal for preparations requiring precise temperature control. Furthermore, its robust and reliable design guarantees extended use, even in intensive production environments. Furthermore, as a pre-owned model, this kettle combines performance and economy, making it a cost-effective choice for companies looking to optimize their cooking processes. Furthermore, its easy integration into various production lines improves productivity without compromising product quality. In summary, the 400L steam cooking kettle is a high-performance solution for food companies seeking efficiency, quality, and reliability in their cooking processes. Technical specifications: 400 L steamer bowl. Used steamer pot. Manufacturer: Process Agro Capacity: 400 liters Iisdpfx Asu H Uznsm Deh Year of manufacture: 2018 W3F57BIq

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, cutting length (max.): 3,050 mm, cutting height (max.): 45 mm, type of input current: three-phase, saw blade diameter: 180 mm, rotational speed (max.): 9,000 rpm, input current: 8 A, input voltage: 400 V, milling height: 45 mm, power: 3.7 kW (5.03 HP), input frequency: 50 Hz, number of digital displays: 1, We offer this very well-maintained Langzauner edge, veneer, and panel cutting machine, model LZ 5/2E - 3050. Available in a combined saw-milling version. CE version. Longitudinal design of the tool carriage on hardened and ground guide rails, lifting and lowering of the saw and milling unit is pneumatic, as well as pneumatic saw blade adjustment, adjustment range 2mm, cable guide for the tool carriage in a plastic energy chain, guidance of the unit by compact LM linear guide units. Central control panel directly in the handling area, electronically adjustable feed speed with soft start and rapid return when the tools are lowered, dust extraction channel with connection socket 150mm, prepared for connection to a central or existing dust extraction system. Special accessories: - Parallel rack compensation in the pressure beam. Prevents tilting of the pressure beam. Iisdpfsz Ikupox Am Djh - Movable, front support table 200mm wide - Rear sizing table for veneer processing, size 3050 x 500 mm, with parallel guidance and pneumatic stop lock - Foldable inserts for stop depth 800mm - Digital width display. Quick and accurate setting of the stop depth. Type: LZ 5/2E - 3050 Factory number: 2/4717 Year of manufacture: 1998 Power: 3.7 kW Rated voltage: 3 x 400V + N Rated current: A Frequency: 50 Hz If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: used, Year of construction: 2011, max. workpiece length 4100 mm profile spindle 8 Stück main drive 16 kW Control SIEMENS Working Process Wooden Window Production Line ----- Sale on behalf of the client; ex-site. System can be viewed while still in operation! Iiedpfjzughuex Am Deh System comprising: Item 1: Infeed conveyor following the planer (planer NOT included, can be bougth additonally as option)) Item 2: Working Process Sapiens, Year of Mfg. 2011 (end-grain milling and drilling) - Spindle 1: 10 kW, HSK-E63, A/C-axis - Spindle 2: 10 kW, HSK-E63, A/C-axis - Spindle 3: 16 kW, HSK-E63, C-axis - Spindle 4: 16 kW, HSK-E63, C-axis Item 3: Transport system to LOGOS SCH Item 4: Working Process LOGOS SCH, Year of Mfg. 2008 (end-grain and longitudinal milling and drilling) - Spindle 1: 16 kW, HSK-E63 - Spindle 2: 16 kW, HSK-E63, C-axis - Spindle 3: 10 kW, HSK-E63, C-axis, A-axis - Spindle 4: 3 kW, fixed configuration, for 2 tools (e.g., for weather-seal grooves, wood-aluminum clip slots, etc.) - Central pick-up tool changer with 95 tool positions Item 5: Outfeed conveyor Detailed descriptions and layout available upon request! (Technical specifications according to manufacturer – subject to change/without guarantee!)

Condition: excellent (used), Year of construction: 2019, operating hours: 40 h, functionality: fully functional, machine/vehicle number: MCH-D 150, total length: 2,000 mm, total width: 1,000 mm, total height: 1,000 mm, overall weight: 2,000 kg, input voltage: 400 V, type of input current: three-phase, power: 55 kW (74.78 HP), input current: 55 A, input frequency: 50 Hz, Equipment: documentation/manual, MICROCUTTER EMULSIFIER SUITABLE TO CREATE FINE CHOP AND EMULSIFIED MIXES : MEAT EMULSIONS SAUSAGE AND WURST EMULSIONS LIVER PATE Iiodpfxozrfg Rs Am Deh MARINADES AND SAUCES FRUIT AND VEGETABLE PUREE'S SOUPS

Condition: like new (used), Year of construction: 2016, operating hours: 1,800 h, Bowl Chopper Make: Seydelmann Model: K126 H AC 2016 Low hours All stainless Iiodpfxszvgmgo Am Deh With unloader