Used Fume Extractor for sale (1,122)

Condition: good (used), functionality: fully functional, type of input current: three-phase, total height: 2,000 mm, total width: 900 mm, total length: 1,600 mm, Höcker Polytechnik VACUMOBIL EA 160 Self-cleaning Dust & Chip Extractor Todpfx Aoxph Dasdljf Specification: • Condition – used, after inspection • Manufacturer – Höcker Polytechnik • Model – VACUMOBIL EA 160 • Turbine motor power – 3.45 kW • Filter self-cleaning mechanism • Turbine inlet – dia. 160 mm • One collection bin for dust/chips • Automatic mode for extractor start synchronised with machine • Overall dimensions – 160 x 90 x 200 cm (L x W x H) Additional information: • Good, factory technical condition • Photos show the actual condition of the item for sale • Possibility to switch on and test the device on site

Condition: ready for operation (used), Local Exhaust Unit, Workplace Extractor, PlymoVent S-1, Used Machine,smoke suction,dust extractor,plymovent Manufacturer: PlymoVent Model: S-1 Tedsxa Hldspfx Adlof Overall Dimensions: Width: 1600 mm Depth: 660 mm Height: 1510 mm Weight: 103 kg Year of Manufacture: 2001 Max. Airflow: 1400 m³/h

Condition: good (used), Year of construction: 2016, operating hours: 6,041 h, suction capacity: 4,000 m³/h, negative pressure: 3,000 Pa, Dust extraction, welding fume extraction, self-cleaning, pneumatic, vacuum cartridge filter for plasma, laser, sandblasting, soda blasting, shot blasting and all types of dry dust. Brand: TEKA Model: Filtercube 2H Year of manufacture: 2016 Operating hours: 6041 Filter cleaned with a microprocessor controller with compressed air pulses during operation, which ensures high efficiency of the device. Low demand for compressed air thanks to the "Power-Spray" system The central Filtercube filter ventilation device equipped with cartridge filters is an ideal solution for almost all problems in the area of fume and dust filtration. Fan on the clean side, which reduces the risk of explosion to a minimum. Application: central exhaust system for multiple welding stations extraction system for welding robots extraction system for thermal cutting and grinding tables system for general filter ventilation of the hall (push-pull system, displacement system) extraction system in combination with an exhaust table extraction system for grinding non-explosive materials Parameters: Fan in a sound-absorbing enclosure with a power of 3 kW. Tsdotpvcyspfx Adlsf Capacity 4000 m3/h Negative pressure 3000 Pa Inlet diameter: 315 mm Filtration surface: 50 m2 control cabinet technical documentation Possibility to order new filter inserts tailored to the customer's needs.

Condition: new, The AL-KO CLEAN VAC central vacuum units are the ideal solution for direct extraction from handheld processing machines and as central vacuums for cleaning entire workshop or production areas. Wherever high suction power is required or long piping runs need to be bridged, AL-KO CLEAN VAC units are the perfect solution. Applications: - Extraction for handheld processing machines, e.g. in joineries, grinding shops, training workshops - Cleaning vacuuming of floors and machines in workshops, production areas or warehouses - Direct extraction at small diameters such as filling stations, dosing systems, etc. Advantages: - High suction power up to 25,000 Pa negative pressure - Perfect plug & play: fully pre-assembled at the factory. Fully operational after connecting power and compressed air Tsdpfx Adjwwt Aaeljf - 100% air recirculation via M-class dust filters (residual dust < 0.1 mg/m3) with optional H13/H14 post-filter stage - Attractive appearance and additionally weatherproof - Low-noise operation thanks to sound-insulated and powder-coated housing - Easy handling: set up, connect, immediately ready for operation at the customer’s site

Condition: good (used), Year of construction: 2019, Mist extractor Tsdpfx Astu Uxrodljf

Condition: like new (used), Year of construction: 2021, operating hours: 7 h, functionality: fully functional, machine/vehicle number: 210800146, type of input current: AC, overall weight: 90 kg, input voltage: 230 V, volume flow: 950 m³/h, power: 1.1 kW (1.50 HP), input frequency: 50 Hz, input current: 6 A, transport length: 1,200 mm, transport width: 800 mm, hose length: 3,000 mm, The practical base unit for welding fume extraction is designed for occasional use with low amounts of dust. The rotatable and swiveling extraction hood provides a 360-degree operating radius, minimizing repositioning during welding. The base unit is W3-certified, making it suitable for welding chrome-nickel steel. 3m arm, hose version. Tedpjxu Nv Ujfx Adlef

Condition: ready for operation (used), functionality: fully functional, filter area: 2.2 m², volume flow: 3,000 m³/h, Sawdust extractor 1 bag Alfa Rimini Specification: • condition - used • manufacturer - Alfa Rimini • model - Alfa 1 • turbine engine power - 1.5 kW (single-phase, 220V) • turbine inlet - fi 160 mm • collection bag diameter - 1 x fi 500 mm • 1 filter bag with dimensions - 500 x 1250 mm (2.2 m2) • efficiency - 3,000 m3/h • year of manufacture - 2000 • dimensions 110 x 720 x 260 cm (length x width x height) Additional information: • very good, factory technical and visual condition Tedpevuhqnjfx Adlef • the photos show the actual condition of the item for sale • possibility of switching on and checking the device on site

Condition: good (used), Year of construction: 2013, functionality: fully functional, type of input current: three-phase, overall weight: 800 kg, Plymovent Diluter – Welding Fume Extraction System The Plymovent Diluter is a stand-alone air purification unit specifically engineered for welding workshops. Unlike traditional ducted ventilation, the Diluter recirculates and cleans air within the workshop, eliminating the need for external ducting. Clean, filtered air is discharged horizontally from overhead modules, establishing an optimal airflow pattern that continuously dilutes and removes welding fumes from the operators' breathing zone. Key specifications & features: - Airflow capacity: specifically designed for medium to large-scale welding workshops - Installation: Stand-alone unit – no ducting or complex extraction system required - Filtration: Fitted with high-efficiency filter cartridges, replaced at prescribed intervals - Operation: Automatic fan control with uniform horizontal air distribution - Maintenance: Serviced by the official importer, regular filter replacement ensured - Construction: Robust industrial-grade build suited for continuous operation Benefits: - No investment needed for expensive ductwork or ventilation installation - Ensures a healthier and cleaner working environment for welders - Compact footprint, easily integrated into existing workshop layouts - Supported by Plymovent’s expertise – a Dutch manufacturer specializing in welding fume extraction systems globally Todexf Iqrepfx Adlef The offered unit is in excellent condition, fully serviced, and ready for immediate use. Filters were changed one month ago.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, type of input current: AC, overall weight: 45 kg, input voltage: 230 V, total width: 4,064 mm, total length: 7,366 mm, total height: 6,604 mm, filter area: 5 m², suction capacity: 180 m³/h, pressing: 36,000 Pa, power: 1.5 kW (2.04 HP), The device has seen little use and is in very good condition and fully functional. Specifications The ClearO2 W100 is designed to complement the 8XE MIG and 8XR MIG cobot extractors from Translas. With the combination of the welding fume burners of the 8XE MIG and 8XR MIG cobot extractors and the ClearO2 W100 devices, we capture between 90% and 98% of the welding fumes at the source and filter them with an efficiency of > IFA 99.8%. The compact device is perfect for relocation in the workplace due to its low weight - only 45 kg - and its four wheels, two of which are lockable. Automatic cleaning The ClearO2 W100 device has an automatic cleaning function by reverse compressed air pulse. As soon as the negative pressure in the filter is too high, the device automatically starts cleaning the filter. A manual cleaning function can be performed by pressing a single button. The automatic start/stop function to save energy and synchronize the device with the 8XE MIG and 8XR MIG Cobot extraction units is standard on the ClearO2 units. As soon as the gun is removed from the specially designed torch holder, the machine starts working automatically. Continuous duty motor The unit's electric motor is designed to work continuously without losing power. Thanks to the automatic cleaning function and simplified motor system, the maintenance of the unit is minimal, making it durable and time-saving. With a filter area of 5 m², this is one of the most efficient units of its size with the largest filter. The filter is disposable and has an active surface with an efficiency of: IFA >99.8%. Lightweight and mobile The ClearO2 W100 units are designed to meet the needs of a single welder who needs to change his workplace. Examples of such applications include shipbuilding, wind tower construction, tank building and other similar manufacturing industries. The four wheels with two locks and the low weight - only 45 kg - allow the welder to easily move the device to the next work location. Tjdevpgkcjpfx Adlof [Source: translas]

Condition: new, The powerful, mobile welding fume extractors AL-KO CLEAN UNIT F are the ideal solution for extracting welding fumes during manual welding, at automated welding stations, or with welding robots. Function: The welding fumes generated at the welding site are captured via extraction arms and hoods, among other means, and conveyed through a duct to the inlet of the AL-KO CLEAN UNIT F. In a large pre-separation chamber, coarse particles are first separated out. The subsequently arranged filter cartridges of dust class “M” filter out the remaining fine dust particles. During extraction operation, the differential pressure-controlled filter cleaning system removes adhering particles from the filter cartridges. Venturi nozzles on the filter cartridges maximize the cleaning efficiency, ensuring consistently high suction power and a long filter service life. A volumetric flow monitor continuously controls the required suction capacity and issues a warning if the nominal value is undercut. The collected dust is gathered in an easily mobile container. The cleaned air is recirculated into the room via the top of the unit. Applications: - For all welding applications with unalloyed or low-alloyed steel - Usable as extraction at individual welding stations and at duct systems with several extraction points - Extraction at fixed-position hoods and welding tables Advantages: - Consistently high suction power thanks to an efficient fan and long-life cleanable filters Tjdpfx Aswwkvqedljf - Extremely quiet due to high-performance sound insulation - Suitable for individual welding stations and for connection to duct systems - IE3 motors for high energy efficiency - Wide performance range - Optional accessories for various welding applications

Condition: used, Year of construction: 1994, filter area: 250 m², suction capacity: 7,500 m³/h, Dust extraction, welding fume extraction, filter ventilation, self-cleaning filter, pneumatic, vacuum dust extractor, plasma, laser, sandblasting and all types of dry dust absorber. Donaldson Torit model: 3DF12 cyclopeel - with pre-separator Cartridge filter inserts cleaned pneumatically with compressed air pulses during operation, which ensures high efficiency of the device. The fan is placed behind the filter on the clean side, which reduces the risk of explosion to a minimum. Cartridge filter inserts. Fan with a power of 5.5 Kw Max efficiency 7500 m3/h Filtration surface 250 m2 Tedpfxewgknxe Adlsf 12 filter inserts inlet diameter - 315 mm Dimensions: filter unit: width - 2.15 m x 2.25 m height - 3.15 m control cabinet: length - 1.20m width - 0.80m height - 0.40m fan: length - 1.20m width - 0.80 m height - 1.20m stock no.: 0988

Year of construction: 2015, operating hours: 10 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: SN 15101588 SP 082988, Thermo Scientific Dionex ASE 350 Automatic Sample Extractor for High-Performance Extraction of Solid Samples at High Pressure and High Temperature Thermo Scientific Dionex ASE 350 Automatic Sample Extractor is equipped with a carousel for 24 extraction cells with a volume of 1 to 100 ml, a carousel for 60 ml and 250 ml collection containers and a solvent organization module. Additional equipment offered with the extractor: - Extraction cells with a volume of 22 ml – 6 pcs. - Bottles for solvents with a volume of 2 l – 2 pcs. - Bottle connections with caps – 2 pcs. Date of purchase: December 2015 The ASE 350 system is a fast extractor that simplifies work in almost any application requiring extraction from soil, sediments or plant or animal material. Todpfx Adjwm Ariolof 1. The extractor weighs 65 kg. A suitably stable laboratory table must be provided. 2. The ASE 350 extractor is powered by 230 V, 50 Hz. The required fuse is 16 A. 3. Nitrogen with a purity of 99.99% is required to ensure proper operation of the extractor. The reducer should allow the output gas pressure to be set within the range of 1.03-1.38 MPa. 4. Optionally, in addition to nitrogen, air can be used to control the pneumatics of the device. The air should be 99.99% pure. The air source should allow the output gas pressure to be adjusted within the range of 0.4 MPa to 0.8 MPa. NOTE: AIR DOES NOT SUBSTITUTE FOR NITROGEN, WHICH IS NECESSARY, AIR CAN BE REPLACED WITH NITROGEN. 5. Dimensions: 750 x 600 x 700 mm (width x depth x height).

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 5 h, functionality: fully functional, type of input current: three-phase, filter area: 28 m², negative pressure: 1,800 Pa, total height: 2,930 mm, total width: 1,250 mm, total length: 2,340 mm, nominal flow rate: 4,200 m³/h, input voltage: 400 V, suction capacity: 6,160 m³/h, power: 7.5 kW (10.20 HP), rotational speed (max.): 3,000 rpm, input frequency: 50 Hz, pressing: 1,800 Pa, *Exhibition unit *Only in operation for 5 hours *Extraction unit in mint condition *New filter elements *Atex fan Todpewgpl Aofx Adlef *Immediately available *Other units available upon request *Plug-in ready

Condition: new, Year of construction: 2025, The CORMAK DCV5200E+ extractor is an efficient device for removing dust and wood chips, ideal for the carpentry industry. It has a 3 kW engine, a capacity of 5200 m³/h and 18 polyester filters that retain particles down to 5 microns. The compact design, metal rotor and the ability to connect to several machines ensure efficiency and cleanliness of work. Extractor equipped with an automatic shaking system! Technical parameters CONTINUOUS MOTOR POWER S1 3 kW / 400 V, 50 Hz SPEED 3000 rpm SUCTION EFFICIENCY 5200 m3/h SUCTION PIPE DIAMETER 200 mm SUMP SPEED Todpfxowlr Azj Adljf 30 m/s FILTER SURFACE 10 m2 FILTER MATERIAL Polyester, 5 microns NUMBER OF FILTERS 18 DIMENSIONS 2441 x 940 x 2270 mm WEIGHT 260 kg

Condition: used, functionality: fully functional, Inlet diameter: 38cm * Production may vary depending on the product. * Maximum capacity from 1 to 200 t/h *Hot extraction * Tomato extraction Todpfxownx Txj Adlsf * Fruit and vegetable extraction * Alveolar and hypo-cycloidal rotor Final product: * Tomato puree * Fruit puree * Vegetable puree

Condition: new, Year of construction: 2025, Extraction nozzle 355 mm Nominal motor rating 15.0 kW / 3 Ph Voltage 400 V / 50 Hz Max. flow rate ca. 10,000 m3/h Nominal flow rate* 7,127 m3/h Tjdpfx Adsfzbqyjlef Vacuum at nominal flow rate 3,000 Pa Filter area 73 m2 Pre-separator Integrated Extinguishing device Integrated Swarf collection capacity (net / gross) 3 x 165 L / 3 x 250 L Sound pressure level 73 dB(A) Dimensions (L / W / H) in mm 3,130 x 1,058 x 2,351 Weight net 1,040 kg

Condition: used, filter area: 60 m², suction capacity: 5,000 m³/h, Dust extraction, welding fume extraction, filter ventilation, self-cleaning filter, pneumatic, vacuum dust extractor, plasma, laser, sandblasting and all types of dry dust absorber. PLYMOVENT MDB Multi Dust Bank Cartridge filter inserts cleaned pneumatically with compressed air pulses during operation, which ensures high efficiency of the device. The fan is placed behind the filter on the clean side, which reduces the risk of explosion to a minimum. Tjdpfx Adjwbtczelef 5.5 kW fan complete with noise silencer Efficiency 5000 m3/h Filtration area 60 m2 Filter inserts 4 pcs. Inlet diameter 315 mm The device is in very good technical condition.

Condition: excellent (used), Year of production: 2017/2018 Quantity: 5 pieces Operating airflow at 15 kPa pressure - 500 m3/h (942 cubic feet per minute) Main filter area - 3.4 m2 (36.6 square feet) Main filter material - polyester Ambient temperature - -10 °C to +40 °C (14 °F to 104 °F) Process air temperature - 0 °C to +60 °C (32 °F to 102 °F) Requirements - 6-10 bar (87-145 pounds per square inch) Consumption - 0.5 liters (0.13 gallons) per cleaning pulse Inlet hole replacement - diameter 100 mm (3.937 inches) Outlet hole replacement - diameter 105 mm (4.13 inches) Tank capacity - 50 liters (13.21 gallons) Weight - 360 kg (784 lbs) Recycling of materials - approximately 95% of weight Tsdpfxotvf Ene Adlof Noise level - 70 dB(A)

Condition: new, Year of construction: 2025, functionality: fully functional, FM300 extractor is a simple machine for extracting chips and sawdust. Capability of quick bag replacement and portability due to the wheeled base make our extractor very practical. Additionally, absorber's metal rotor ensures quiet operation. Despite providing such great features as failure-free operation and high efficiency, it is very affordable. Metal balanced rotor ensures vibration-free and quiet operation Quickly mounted BURLAP extraction bag 4-wheeled base makes it portable Stable, metal construction Default equipment Y-shaped extracting connector, 2×100 Metal wheeled base Technical data Suction efficiency 2530 m3/h Engine speed 2850 rpm Bag capacity 150 L Number of bags 2 Extracting connector diameter 1×130, 2×100 mm Tjdpfx Adjvu Atwolsf Dimensions (L×W×H) 940×510×1960 mm Weight 56 kg Motor power 1.5 kW Power supply 3-phased, 400V EC declaration yes

Condition: new, Year of construction: 2025, The POWER UNIT 160 P is an approved clean-air dust extractor in a self-supporting sheet metal construction made from coloured powdered sheet steel. The device conforms to the most recent regulations, is certified with the BG–GS test seal, in accordance with GS-HO-07 (with endorsement for residual dust concentration test seal H3) and, thus, it can be directly installed in the workroom without additional fire or explosion protection measures. Therefore, it provides an ideal production condition with healthy air at the workplace. It is also suitable for use in workshops with a utilization factor of 2-4 machines (dependent on the required volume-flow), as well as to supplement a stationary plant as local extraction for universal application with different materials. The small external dimensions also allow the dust extractor to be installed in confined workshops. Technical data POWER UNIT 160 P : • Intake connection 160 mm Tedpfxefydzbo Adlsf • Motor rating 2.2 kW; 3 Ph; 400 V/ 50 Hz • Max. volume-flow 2,000 m³/h • Volume-flow at the connection at 20/ 22 m/s 1,448/ 1,592 m³/h • Vacuum at the connection at 20/ 22 m/s 2,503/ 2,399 Pa • Filter area 9.1 m² (23 x Ø 125 mm, 1000 mm long) • Filter cleaning Compressed air cleaning • Filter material Cat. M, el, white washable • Impact on filter 160 m³/m²/h • Max. noise level 71 dB(A) • Residual dust content H3 / (ᐸ0,1 mg/m³) • Swarf collection volume ca. 165 (241) liter • Basic controls Micro SPS-Logo Siemens without display • Electrical connections 5 m connection cable with CEE plug 5 poles, 16 A, with phase inverter • Compressed air supply ½” standard plug compressed air consumption 108 Std.l/ 6 bear • Volume flow monitoring differential pressure cell with warning lamp on control box • Dimensions (L x W x H) 1,688 x 830 x 2,050 mm • Undercarriage 4 plastic castors 125 mm, two of them steerable, one with locking • Weight 340 kg • Design / Control side choice right / left • Finishing RAL 7001 (silver grey) and RAL 7035 (light grey)

Condition: good (used), Year of construction: 2017, suction capacity: 16,600 m³/h, negative pressure: 5,600 Pa, Dust extraction, welding fume extraction, patron filter self-cleaning, pneumatic, vacuum for plasma, laser, sandblasting, soda blasting, shot blasting and all kinds of dry dust. The filter is cleaned pneumatically by pulses of compressed air during operation, which makes the device highly efficient. Fan on the clean side which reduces the risk of explosion to a minimum. Brand: Donaldson Torit DCE Model: DFO4-24 Year of production - 2017 Cartridge filter cartridges, oval - DFO ULTRA-WEB FR - 24 pieces Filtration area of 430 m2 45 Kw fan. Fan model : ART 631 N4T Built-in frequency converter and RITTAL SK 3305540 control cabinet air conditioner. Capacity 16600 m3/h Inlet diameter - 1 x 350mm , 2 x 300 mm Dust emptying cell sluice. Tsdpottah Ujfx Adlsf Comes with a silencer and technical and electrical documentation. Also on offer on request new filter cartridges tailored according to the purpose of the device.

Condition: new, Never used Year of production: 2017/2018 Quantity: 5 pieces Never used Year of production: 2017/2018 Quantity: 5 pieces Tedotu Udiepfx Adlof Operating airflow at 15 kPa pressure - 500 m3/h (942 cubic feet per minute) Main filter area - 3.4 m2 (36.6 square feet) Main filter material - polyester Ambient temperature - -10 °C to +40 °C (14 °F to 104 °F) Process air temperature - 0 °C to +60 °C (32 °F to 102 °F) Requirements - 6-10 bar (87-145 pounds per square inch) Consumption - 0.5 liters (0.13 gallons) per cleaning pulse Inlet hole replacement - diameter 100 mm (3.937 inches) Outlet hole replacement - diameter 105 mm (4.13 inches) Tank capacity - 50 liters (13.21 gallons) Weight - 360 kg (784 lbs) Recycling of materials - approximately 95% of weight Noise level - 70 dB(A)

Condition: used, Year of construction: 2015, functionality: fully functional, overall weight: 1,100 kg, filter area: 128 m², suction capacity: 15,000 m³/h, negative pressure: 2,800 Pa, Plug & Play filter tower for exhaust in halls during emission of cooling and lubricating agents. ESTA Filtower L-160 filter ventilation tower. Ideal for aerosols, oil mist, emulsion mist and fumes. Filter ventilation of industrial halls - numerous technological processes in production plants, mainly carried out in metalworking. Often, exhaust systems that recover coolant, installed on machines are not effective enough or are simply not installed on them. Retooling of machine tools, frequent opening of their housing or lack of construction at the machining heads causes the oil mist to escape outside the area of the machines, into the workplaces of people exposed to inhalation of harmful mists and vapors. Installing a ventilation tower significantly improves the air quality in workplaces and should be treated as an ideal filter ventilation supplement for halls, where the complete separation of oil mist by coolant recovery devices is impossible or definitely difficult to achieve. Applications: Tsdpfev I Ub Tex Adlsf - Support for local exhausts -Support for direct exhaust during CNC cutting -Production halls – CNC machines -for improving air quality in production halls year of production - 2015 Efficiency - 15000 m3/h Negative pressure up to 2800 Pa Filtration area - 128 m2 2 x 4 kW fan (possibility of working on 1 fan) Device in very good condition. Stock no.: 0971

Condition: used, Year of construction: 1999, suction capacity: 5,600 m³/h, negative pressure: 3,000 Pa, Dust extraction, welding fume extraction, self-cleaning filter, pneumatic, vacuum dust extractor, plasma, laser, sandblasting and all types of dry dust. Filter cleaned pneumatically with compressed air pulses during operation, which results in high efficiency of the device. Sinbran filter cartridges. SINBRAN filter cartridges are environmentally friendly and therefore suitable for use in the pharmaceutical and food industries. They are suitable for separating aerosols of organic materials, such as those created during laser cutting operations. Todpfsvxtkzjx Adljf SINBRAN filter cartridges combine the advantages of membrane filters with the advantages of rigid body filters: Large filter surface requiring minimal space. High mechanical load capacity, very long life cycle, low pressure drop and high filtration efficiency is a new approach to dust removal that achieves impressive filtration results, even in particularly difficult applications. High mechanical stability of the filter material ensures long service life. Compared to conventional rigid filters it causes minimal pressure loss. Short compressed air pulses during the filtration process ensure effective filter cleaning. 7.5 Kw fan Efficiency 5600 m3/h Sinbran filter inserts 12 pcs. Negative pressure 3000 Pa

Year of construction: 2019, condition: good (used), Dust extraction,welding fume extractor,cartridge filter self-cleaning,pneumatic,vacuum for plasma,laser,sandblasting,sodding,blasting and all kinds of dry dust. Brand: TEKA / Bystronic Model: Filtercube 4H / FilterBys Version 2 Year of manufacture: 2019 Filter cleaned by microprocessor controller with compressed air pulses during operation thus high efficiency of the device. Low compressed air demand thanks to the system "Power-Spray" The Filtercube central filter unit equipped with cartridge filters is the ideal solution for almost all problems in the area of smoke and dust filtration. Fan on the clean side which reduces the risk of explosion to a minimum. Application: Todpfenyhvqjx Adlef central extraction system for multiple welding stations extraction system for welding robots extraction system for thermal cutting and grinding tables system for general hall filtering (push-pull system, displacement system) extraction system in combination with an extraction table extraction system for grinding of non-exploitable materials Parameters: 5.5 Kw fan Capacity 3800 m3/h Vacuum pressure 3250 Pa Inlet diameter : 250 mm Filtration area of 100 m2 Equipped with "DUST-VAC" unit , which automatically pumps the dust into a separate tank. Possibility to order new filter cartridges tailored to the customer's needs Technical documentation included.