Used Gbs 185 Eco Autocut for sale (6,859)

Year of construction: 2011, condition: ready for operation (used), overall weight: 700 kg, total width: 1,500 mm, total height: 1,800 mm, product length (max.): 2,800 mm, Work piece handling system manufactured in 2011. This LANG Eco-Tower + Lang Eco-Feed features a total height of 3192 mm when installed and a load capacity of at least 750 kg. The Eco-Tower has dimensions of 280 x 150 x 180 cm, while the Eco-Feed measures 250 x 70 x 130 cm. If you are looking to get high-quality handling capabilities, consider the LANG Eco-Tower + Lang Eco-Feed system we have for sale. Contact us for further details. • Eco-Tower • Version: 3.5 Windungen (3.5 Windings) • Total height (installed): 3192 mm (at TH=1000) • Operating temperature: -25°C to +55°C • Load capacity (lifting gear requirement): min. 750 kg Additional equipment • Eco-Feed Hsdpfjyynfuox Aacenk • Weight: 400–450 kg • Dimensions (L x W x H): 250 x 70 x 130 cm • Operating temperature: -25°C to +55°C • 50 pcs of vices included

Year of construction: 2025, condition: new, Operates with 3 Phase 400V-50/60 Hz mains voltage and generators, tolerates voltage fluctuations up to 15%. Due to inverter technology, energy efficiency is higher than the conventional machines. Excellent welding characteristics with all types of solid and flux cored wires with CO2 or Mix gases. 4 Wheel Drive system, offers very powerful feedability for longer torches and offers less deformation on soft wires such as aluminum and flux cored wires. Welding voltage, wire feed speed (welding current) is adjusted from the panel in front of the wire feeder. Optimum welding parameters can be obtained from the printed table inside of the wire feed cabinet. Manual wire feeding & gas valve buttons, Trigger Mode (2/4), Spot mode are available on the wire feeder. Soft Start, Pre-gas, Post-gas, Crater Filling, Burn-Back, Flow Sensor settings are adjusted from the digital panel of the wire feeding system. ø300 mm, ø270 mm and ø200 mm spools and drums of any size can be used. 24V AC outlet for CO2 gas heater. Built in gas cylinder platform with large wheels to ease mobility in workshops. The Separate wire feeder standard harness length is 5 m and can be extended up to 30 m upon request (M-MW models). Protected against voltage fluctuations. Designed also for outdoor use, protection class is IP 23. Water cooling unit for water cooled torches provides powerful cooling even at very hot climates. (Water-cooled (W) models) Hnedpfx Aajyx Hpiecek Standard accessories come with the machine.

Condition: used, Year of construction: 2009, Max. bending capacity: 300 kN (30t) Cylinder stroke: 250 mm Pressure adjustable from 0-300 kN Tool height: 200 mm Biegleistung:140 x 20 mm at V125; 200 x 18 (19) mm at V200 Richtleistung Wy200 at Richtklotzabstand 1,000 mm Length stop with multiple stop flaps Hjdpfxeywx E To Aacjnk Automatic and manual mode possible Weight: approx. 700 kg

Condition: used, Year of construction: 2021, Probst Verlegemaschine HVZ ECO — Year of manufacture 2021 Used, from the professional rental fleet of Kurt König Baumaschinen GmbH, Einbeck, Germany. Condition & Notes: - Condition: Used, ex-rental, regularly serviced Hnsdpfjyz Up Aex Aacek - Functionality: Fully operational - The product image shows a comparable unit in new condition — the actual condition varies depending on duration of use - On-site inspection in 37574 Einbeck available by appointment Price EUR 6.800 plus VAT | EXW Einbeck | Delivery on request

Condition: new, Year of construction: 2025, NEW MACHINE Mohr D 56 ECO Accessories: Hnsdpfowkrilsx Aacjk 2 HSS knives On-board tool Documentation available at short notice

Condition: good (used), Year of construction: 2016, functionality: fully functional, Microstep Mastercut Eco Plus 3001.15 Year of manufacture: 2016 Controller: IMSNC Cutting table: 3000 x 1500 mm Extraction channel left/right Plasma source: Kjellberg HiFocus 161i, adjustable 10 – 160 A Power Source HiFocus 161i PLUS • Flexible adaptation of the cutting process to required conditions thanks to soft-switch inverter and microprocessor control • Optimal process management with ultra-fast regulation of cutting current • Process monitoring for torch cooling, ignition time, pilot arc time, short-circuit time during torch ignition, and the power source • Display of operating statuses and error messages via LED and display • Analog and serial interface for adaptation to CNC controls • Infinitely variable adjustment of cutting current from 10–160 A; marking current from 5–25 A Hnedpfoyzy S Aox Aacek • Optimal piercing due to stepless delay time for main arc and adjustable current rise • Adjustable current reduction at corners, as well as at start and end signals from guidance systems • Automatic display of preset cutting current • Serial data transfer for PC-based diagnostics Plasma Cutting Technology Contour Cut • Further development of HiFocus technology for carbon steel • Optimized for cutting fine internal and external contours • High cut quality and contour precision • Holes with angle tolerances according to DIN EN ISO 9013 within range 2-4 • Low angle deviation and smooth cut surfaces • Very good repeatability and dimensional accuracy • No time-consuming post-processing—high productivity, reduced costs • No additional equipment or software required, and no new wear parts necessary • Supplied as standard Plasma Torch PerCut 200/210 • PerCut 200 machine plasma torch for standard applications and high-precision bevel cutting • Quick-change torch PerCut 210 with threaded connector for fast and comfortable setup • Special torches available for custom applications • Higher cutting speeds reduce cost per meter cut • Long service life of consumables conserves resources • Narrower kerf for less emission and waste • Significantly lower gas consumption compared to the competition through efficient liquid cooling up to the nozzle tip • Lower noise level due to reduced gas consumption • Bevel cutting up to 50 degrees with standard consumables • Cutting and marking possible with the same consumables Technical Data: Power source: HiFocus 161i Connection voltage: 400 V; 3-phase; 50 Hz Max. power consumption: 28 kVA (100% duty cycle) Line fuse: 50 A (slow-blow) Protection class: IP 22 Open circuit voltage: 330 V Cutting current: 10–160 A (100% duty cycle) Marking current: 5–25 A (100% duty cycle) Cutting range: max. 50 mm, recommended 0.5–38 mm Max. piercing thickness: 30 mm Weight: 206 kg Plasma Machine Torch: PerCut 200 Quick-change torch: PerCut 210 Clamping diameter: 50.8 mm Plasma gases: O2, N2, Ar/H2 Marking gases: Ar Swirl gases: O2, N2, air, N2/H2 (F5)

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: automatic, actuation type: electric, laser type: fiber laser, laser source manufacturer: MAX Photonics, laser power: 1,500 W, sheet thickness steel (max.): 15 mm, sheet thickness stainless steel (max.): 6 mm, sheet thickness aluminum (max.): 6 mm, sheet thickness brass (max.): 4 mm, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, compressed air connection: 8 bar, overall weight: 2,800 kg, Equipment: CE marking, centralized greasing system, cooling unit, dust extraction, emergency stop, fume extraction, safety light barrier, Laser Cutting Machine with 1500 W Fiber Laser "Ecoline" Our goal is to offer highly precise, long-term stable, yet affordable laser machines. Our machines are ideal for workshops and repair businesses. A perfectly developed library of cutting parameters is included, along with first-class service. Please also take note of our attractive leasing and hire-purchase options. The most cost-effective entry into laser cutting technology Hnedpsitu Srjfx Aacok - High-quality MaxPhotonics laser source - Extremely energy-efficient cutting system - Requires only approx. 3.0 x 3.0 meters installation space - Top quality; book your viewing appointment now! Cutting capacities: - Steel sheet up to 15 mm - Stainless steel up to 6 mm - Aluminum sheet up to 5 mm - Travel range approx. 1300 x 1300 mm - Table size approx. 1300 x 2500 mm (suitable for a full mid-format sheet) - Machine control in German - Manual front door - Comprehensive collision protection features - Large front window for monitoring the cutting process - Automatic, programmable 2-gas switching (compressed air/nitrogen, oxygen) - Extensive cutting parameter files - Includes nesting module - CypCut1000 cutting software - Raytools 240 cutting head - Very user-friendly operation - High-performance laser chiller Sales are exclusively to commercial customers. Delivery/Consultation/Sales only in Germany, Austria, and Switzerland. Machine dimensions approx.: Width: 3.2 m Height: 2.3 m Length: 3.3 m Total weight: approx. 2800 kg Need a different laser power, table shape, or table size? No problem. I am happy to provide a custom quote. Not sure which laser power is right for your application? Of course, I can carry out cutting tests tailored to your requirements. Many options are available—from 0.5 kW up to 20 kW laser power.

Condition: used, Elcon wall saw 185 RS. The wall saw is used but still works perfectly. For sale due to business closure. Hsdpfx Asykid Seaconk Optionally, a dust extraction system is available for a small additional fee.

Condition: excellent (used), Year of construction: 2016, operating hours: 45,000 h, functionality: fully functional, clamping force: 600 kN, clearance between the columns: 310 mm, ejector stroke: 110 mm, opening stroke: 270 mm, total length: 3,980 mm, total width: 1,170 mm, total height: 1,870 mm, heating capacity: 6.25 kW (8.50 HP), Haitian MA600 II/130 eco Year of manufacture: 2016 Clamping force: 60 t Immediately ready for operation. Machines are available! Subject to changes, prior sale, and errors! Hnodpoyyd Sdefx Aacsk

Condition: new, capacity 90 degrees: round 305 mm capacity 90 degrees: square 260 mm 350x200 saw band length 3375x27x0,9 mm band speed 37 + 74 m/min table height 940 mm total power requirement 1,5/1,8 kW weight of the machine ca. 0,65 t Hnsdjd Iipxopfx Aacsk dimensions of the machine ca. 1,5 x 1,75 x 1,9 m SPECIAL PRICE!!! Double miter metal band saw, hydraulic semi-automatic GBS 305 HA-I Easy - Miter cuts up to 60° left and 45° right - Material height button - Ball bearing turntable - hydraulic Vice, laterally displaceable - Massive, large material support - Automatic cooling

Condition: new, capacity 90 degrees: round 305 mm Hnjdpfxefgyias Aacok capacity 90 degrees: square 260 mm 350x200 saw band length 3375x27x0,9 mm band speed 18 - 100 m/min table height 940 mm total power requirement 1,5 kW weight of the machine ca. 0,65 t dimensions of the machine ca. 1,5 x 1,75 x 1,9 m SPECIAL PRICE!!! Double miter metal band saw, hydraulic semi-automatic GBS 305 HA-I Easy - Miter cuts up to 60° left and 45° right - Material height button - Ball bearing turntable - hydraulic Vice, laterally displaceable - Massive, large material support - Automatic cooling

Condition: new, capacity 90 degrees: round 250 mm capacity 90 degrees: square 210 mm 290 x 210 mm saw band length 2.965 x 27 x 0,9 mm mm table height 940 mm band speed 25 - 90 m/min total power requirement 1,1/1,3 kW weight of the machine ca. 0,35 t dimensions of the machine ca. 1,3 x 0,8 x 1,5 m SPECIAL PRICE!!! Double miter metal band saw hydraulic semi-automatic with: Hodpfefgyh Sox Aacenk - Hydraulic vice - Material height button - Cut monitoring by ammeter - Cutting pressure feed regulator - Belt speed 25 - 90 m/min - Miter cuts up to 60° left and 45° right - Patented, ball-bearing turntable for easy miter adjustment - Adjustable quick-release vise - Quick release lever - Automatic cooling

Condition: new, cutting diameter 255 mm saw band length 2765x 0,9 x 27 mm cutting width 300 x 180 mm turning speeds 35 + 70 U/min total power requirement 1,8 kW weight of the machine ca. 450 t dimensions of the machine ca. 1,7 x 1,23 x 1,75 m SPECIAL PRICE!!! Double miter metal band saw, frequency converter hydraulic semi-automatic GBS 250 Super HA-I Easy • miter left 60° + right 45° • Material height sensor (automatic cut start detection) • Frame and gear made from one piece, very quiet cut and very low vibration • Hydraulic vice can be moved sideways a. • Guided, high quality industrial bearings • Solid vice + machine casting • Large machine bed • Machine base with tool compartment and chip drawer • Cut monitoring by ammeter • Cutting pressure feed regulator • Support roller (infeed side) • Ball bearing turntable Semi-automatic function: 1. Clamp material 2. Saw starts 3. Rapid lowering to the start of the material or the same for series cutting cut 4. Saw band off 5. Raise the frame to just above the material 6. Open the vise Hodpfxefn Ands Aacsnk

Condition: new, capacity 90 degrees: round 255 mm capacity 90 degrees: square 240 mm Hnedpjd Iipzjfx Aacjk 300 x 180 saw band length 2.765 x 27 x 0,9 mm mm table height 870 mm band speed 18 - 110 m/min Control CNC total power requirement 1,5/1,8 kW weight of the machine ca. 0,63 t dimensions of the machine ca. 1,8 x 1,85 x 1,85 m Miter band saw, fully automatic GBS 255 Super VA-I CNC • miter left 45° automatic operation • miter left 60° semi-automatic operation (cuts without programming) • Material height sensor (automatic cut start detection) • Frame and gearbox made from one piece, very quiet cut and very low vibration • Removable chip tray (disinfection) • Shockproof and ergonomic control panel with oil-resistant EPDM cover • High performance positioning with incremental encoder (CNC) c. • Top access to the saw, material and feed unit • Hinged safety cover • Fine feed adjustment • Semi-auto. Cut! • Optimize work processes with CNC control Possibility to enter various parameters such as quantities and material lengths, automatic calculation of the cutting channel • CNC control for 10 different saw programs with 99 sub-programs for different lengths and quantities, e.g. 1 cutting program with various section lengths • Automatic feed unit (CNC) via ball roller spindle incremental feed with automatic length compensation. Adjustable for section lengths of 2 mm to 9,999 mm, remainder length 170 mm.

Condition: new, capacity 90 degrees: round 310 mm capacity 90 degrees: square 280 mm 400x250 saw band length 4020x34x1,1 mm band speed 18 - 100 m/min table height 890 mm total power requirement 2,2 kW weight of the machine ca. 0,99 t Hsded Iiprspfx Aacenk dimensions of the machine ca. 1,85 x 2,2 x 2,0 m Miter band saw, fully automatic, GBS 310/400 VA-I CNC • miter left 45° automatic operation • miter left 60° semi-automatic operation (cuts without programming) • Material height sensor (automatic cut start detection) • Frame and gear made from one piece, very quiet cut and very low vibration • Removable chip tray (disinfection) • Shockproof and ergonomic control panel with oil-resistant EPDM cover • Top access to the saw, material and feed unit • Hinged safety cover • Fine feed adjustment • Semi-auto. Cut! • Optimize work processes with CNC control Possibility to enter various parameters such as quantities and material lengths, automatic calculation of the cutting channel • CNC control for 10 different saw programs with 99 sub-programs for different lengths and quantities, e.g. 1 cutting program with various section lengths • Automatic feed unit (CNC) via ball roller spindle incremental feed with automatic length compensation. Adjustable for section lengths of 2 mm to 9,999 mm, remainder length 170 mm.

Condition: new, capacity 90 degrees: round 255 mm capacity 90 degrees: square 240 mm 300 x 180 saw band length 2.765 x 27 x 0,9 mm mm table height 870 mm band speed 18 - 110 m/min total power requirement 1,5/1,8 kW weight of the machine ca. 0,63 t dimensions of the machine ca. 1,8 x 1,85 x 1,85 m Miter band saw, fully automatic GBS 250 Super VA-I MPS • Miter left. 45° automatic operation • Miter left. 60° semi-automatic operation (cuts without programming) • Shockproof and ergonomic control panel with oil-proof EPDM cover a. • Material height sensor c. (Automatic cut start detection) • Frame and gearbox made from one piece, very quiet cutting and very low vibration • Chip tray can be removed (disinfection) • Easy access to the saw, material and feed unit • Foldable safety cover • Fine feed adjustment • Semi-automatic. Cut! Saw automatically with microprocessor control Adjustable for 2 program levels Hnsdpfx Aajd Iip Ascek Semi-automatic operation Fully automatic operation Start after entering the desired number and length: material cut- Cutting execution and piece counting until the program is fulfilled • MPS control for entering the desired number of feeds • All important machine data is shown on the LED display during the Cutting process displayed (power consumption, cutting time, number of pieces) • The entered data is in RAM memory • The autodiagnostic circuit automatically shows all irregularities as an error message and checks the entire process • Feed unit mounted floating. • Length adjustment via handwheel and vernier with mechanical position indicator. Adjustable for section lengths from 2.5 mm to 420 mm or through Automatic reversing can be repeated 1 - 29 times, remaining piece length 210 mm

Condition: new, capacity 90 degrees: round 305 mm capacity 90 degrees: square 260 mm 350x200 saw band length 3375x27x0,9 mm band speed 18 - 100 m/min table height 880 mm total power requirement 1,5/1,8 kW weight of the machine ca. 0,84 t dimensions of the machine ca. 1,85 x 1,9 x 2,0 m Demonstration system for a SPECIAL PRICE!! Fully automatic miter band saw • miter left 45° automatic operation • miter left 60° semi-automatic operation (cuts without programming) • Material height sensor (automatic cut start recognition) • Frame and gear made from one piece, very quiet cut and very low vibration • Removable chip tray (disinfection) • Shockproof and ergonomic control panel with oil-resistant EPDM cover • Top access to the saw, material and feed unit • Hinged safety cover • Fine feed adjustment Hnsdpfx Aaeupw R Ascsk • Semi-auto. Cut! • Optimize work processes with CNC control Possibility to enter various parameters such as quantities and material lengths, automatic calculation of the cutting channel • CNC control for 10 different saw programs with 99 sub-programs for different lengths and quantities, e.g. 1 cutting program with various section lengths • Automatic feed unit (CNC) via ball roller spindle incremental feed with automatic length compensation. Adjustable for section lengths of 2 mm to 9,999 mm, remainder length 170 mm. Inclusive: - Micro-spray device - Leveling elements

Condition: new, capacity 90 degrees: round 310 mm capacity 90 degrees: square 280 mm 400x250 saw band length 4020x34x1,1 mm band speed 37 + 74 m/min table height 940 mm total power requirement 1,8/2,2 kW weight of the machine ca. 0,68 t dimensions of the machine ca. 1,5 x 1,78 x 1,3 m ACTION PRICE !!! Double miter band saw, hydraulic semi-automatic, GBS 310/400 HA-I Easy • miter left 60° + right 45° • Industrial hydraulics, powerful 18 bar • Best access to the material • Ammeter to check a. - Optimization of cutting force - Tape life Hnedpfed Iiptjx Aacsk - cutting course • Vise closes/opens hydraulically • Chip removal brush • Material turntable with ball bearings b. • Adjustable quick-release c. • Material height sensor (automatic cut start detection) Semi-automatic function: 1. Clamp material 2. Saw starts 3. Rapid lowering to the start of the material or the same for series cutting cut 4. Saw band off 5. Raise the frame to just above the material 6. Open the vise

Condition: new, capacity 90 degrees: round 250 mm capacity 90 degrees: square 210 mm 290 x 210 mm saw band length 2.965 x 27 x 0,9 mm mm table height 940 mm band speed 35 / 70 m/min total power requirement 1,1/1,3 kW weight of the machine ca. 0,35 t dimensions of the machine ca. 1,3 x 0,8 x 1,5 m SPECIAL PRICE!!! Hnodped Iip Rofx Aacsk Double miter metal band saw hydraulic semi-automatic with: - Hydraulic vice - Material height button - Cut monitoring by ammeter - Cutting pressure feed regulator - Belt speed 34 / 74 m/min - Miter cuts up to 60° left and 45° right - Patented, ball-bearing turntable for easy miter adjustment - Adjustable quick-release vise - Quick release lever - Automatic cooling Share of freight costs 120 EUR

Year of construction: 2024, condition: used, Manufacture : Volkmann Model : VS250 Eco Year : 2024 Condition: new, never used Classification: ATEX Ex (see photo) Type: MULTIJECTOR® Vacuum Transfer System / conveyor VS250 G900 Pump and Cover Assembly Maximum air intake flow rate: 4,063 NI/min Hnsdoyvk Taopfx Aacjk Electrotimer ET4S (Electropneumatic control unit) Cleaning filters with compressed air Materials: stainless steel

Condition: used, color: other, first registration: 02/2005, Year of construction: 2005, Serial number: 27.50.744.099 We have a stock of >100 axles. Please contact us if you can't find what you are looking for. Hnjdpfx Aeyv H S Sjacsk

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, center height: 200 mm, workpiece weight (max.): 30 kg, grinding length: 400 mm, grinding wheel diameter: 350 mm, total width: 2,600 mm, total length: 1,800 mm, grinding diameter: 100 mm, workpiece weight between centers: 30,000 g, distance between centers: 400 mm, type of input current: AC, spindle speed (max.): 1,000 rpm, spindle speed (min.): 90 rpm, grinding spindle motor power: 3,700 W, grinding spindle speed: 2,000 rpm, overall weight: 2,000 kg, pivoting range: 30 °, input voltage: 400 V, Equipment: rotational speed infinitely variable, incl. swiveling internal grinding attachment General Diameter over table: 200 mm Distance between centers (ABC): 400 mm Hodpfx Aajycg A Aocenk Grinding length: 400 mm Grinding diameter (max. / min. OD): 100 / 6 mm Grinding diameter (max. / min. ID): 85 / 6 mm Max. weight between centers: 30 kg Max. weight incl. chuck: 10 kg Grinding spindle Grinding wheel size: 350 x 127 x 50 mm Minimum usable grinding wheel size: 300 mm Spindle speed: 1800 – 2000 rpm Spindle motor power: 3.7 kW (Peripheral) speed: 33 m/sec Rapid traverse: 40 mm Rapid traverse with handwheel: 20 mm Max. automatic infeed on diameter: 1.7 [3.4] mm Minimum diameter increment: 0.001 mm Infeed speed on diameter (coarse/fine): 0.015 – 6 / 0.015 – 3 mm/min Table Table speed: 0.1 – 5 m/min Table stroke: 450 mm Minimum travel: 2 mm Maximum table swivel range: -2° to +30° Work spindle Taper bore: MT-4 Spindle speed: 90 – 1000 rpm Spindle motor power (2-stage): 0.28/0.37 kW Including complete set of Schaublin collets DM 2.5 – 20 Incl. 3-jaw chuck Incl. flange with grinding wheel

Condition: good (used), Year of construction: 2010, operating hours: 33,600 h, functionality: fully functional, travel distance X-axis: 1,035 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 510 mm, controller manufacturer: Siemens, controller model: Siemens 810D / ShopMill, table width: 560 mm, table length: 1,200 mm, spindle speed (max.): 10,000 rpm, operating hours of spindle: 11,000 h, Equipment: chip conveyor, Internal coolant supply (IKZ) Control cabinet cooling: Rittal SK 33023.100 Hedjyua Sbspfx Aacjnk Tool magazine: 20 positions

Condition: good (used), Year of construction: 2013, Grinding wheel 400 x 203 mm Regulating wheel 225 x 127 mm Fire extinguishing system Kraft u. Bauer Knoll microfilter Hnjdpfeyxl Drjx Aacjk Steuli lifting station

Condition: good (used), Year of construction: 2013, machine/vehicle number: 82N1223, Paper cutting machine Polar 80 ECO, year of manufacture: 2013, machine number 82N1223, air table, light barriers, program control, in good condition, immediately available Hodsx Aghwspfx Aacenk