Used Gbs 250 Super Autocut for sale (11,899)

Year of construction: 2020, condition: used, functionality: fully functional, machine/vehicle number: 376292, The Reitz KXE 250-050030-00 is an industrial centrifugal fan designed to generate a high total pressure increase in process installations. The assembly consists of a volute fan casing, an impeller mounted on a separately supported shaft, a coupled electric motor, and a common steel base frame with vibration-isolating mounts. The KXE design is suitable for moving air and process gases in systems requiring high flow rates and pressure. This unit was manufactured in 2020 for a rated volume flow of 500 m³/min and a total pressure increase of 2500 daPa. At its operating point, it delivers 602.4 m³/min at 1862 daPa and 3033 rpm. The shaft is supported by two 6318 bearings lubricated with Shell Gadus S2 V100 2 grease. Manufacturer: Konrad Reitz Ventilatoren GmbH & Co. KG Iedszw Ucxjpfx Acpetn Type: KXE 250-050030-00 Product type: industrial centrifugal fan Serial number: 376292 Year of manufacture: 2020 Material number: 10466442 Measurement category: C Efficiency grade: N61 Target efficiency grade value: 64.5 Rated inlet temperature: 20°C Operating-point inlet temperature: 40°C Rated inlet medium density: 1.205 kg/m³ Operating-point inlet medium density: 0.93 kg/m³ Rated volume flow: 500 m³/min Operating-point volume flow: 602.4 m³/min Rated total-pressure increase: 2500 daPa Operating-point total-pressure increase: 1862 daPa Optimum efficiency: 76.3% Rated shaft power: 256.57 kW Operating-point shaft power: 231.1 kW Rated rotational speed: 2980 rpm Operating-point rotational speed: 3033 rpm Maximum rotational speed: 3159 rpm Maximum medium temperature: 80°C Drive-end bearing: 6318 Non-drive-end bearing: 6318 Lubricant: Shell Gadus S2 V100 2 Initial relubrication interval: 2460 operating hours Subsequent relubrication interval: every 2460 operating hours Grease quantity per bearing: 132 g Conformity marking: CE

Year of construction: 2020, condition: used, functionality: fully functional, machine/vehicle number: 376295, The Reitz KXE 250-050030-00 is an industrial centrifugal fan designed to generate a high total pressure increase in process installations. The assembly consists of a volute fan casing, an impeller mounted on a separately supported shaft, a coupled electric motor, and a common steel base frame with vibration-isolating mounts. The KXE design is suitable for moving air and process gases in systems requiring high flow rates and pressure. This unit was manufactured in 2020 for a rated volume flow of 500 m³/min and a total pressure increase of 2500 daPa. At its operating point, it delivers 602.4 m³/min at 1862 daPa and 3033 rpm. The shaft is supported by two 6318 bearings lubricated with Shell Gadus S2 V100 2 grease. Manufacturer: Konrad Reitz Ventilatoren GmbH & Co. KG Type: KXE 250-050030-00 Product type: industrial centrifugal fan Serial number: 376295 Year of manufacture: 2020 Material number: 10466442 Measurement category: C Efficiency grade: N61 Target efficiency grade value: 64.5 Rated inlet temperature: 20°C Operating-point inlet temperature: 40°C Rated inlet medium density: 1.205 kg/m³ Operating-point inlet medium density: 0.93 kg/m³ Rated volume flow: 500 m³/min Operating-point volume flow: 602.4 m³/min Rated total pressure increase: 2500 daPa Operating-point total pressure increase: 1862 daPa Optimum efficiency: 76.3% Rated shaft power: 256.57 kW Operating-point shaft power: 231.1 kW Iodpfx Aozw Ug Rocpotn Rated rotational speed: 2980 rpm Operating-point rotational speed: 3033 rpm Maximum rotational speed: 3159 rpm Maximum medium temperature: 80°C Drive-end bearing: 6318 Non-drive-end bearing: 6318 Lubricant: Shell Gadus S2 V100 2 Initial relubrication interval: 2460 operating hours Subsequent relubrication interval: every 2460 operating hours Grease quantity per bearing: 132 g Conformity marking: CE

Condition: refurbished (used), Single-column hydraulic press (completely overhauled) PYE 250 S1M with draw cushion - Pressing force: 2500 kN - Installation height: 800 mm - Stroke: 500 mm - Speed: downwards 200 mm/s - Draw cushion: 1000 kN, stroke: 200 mm - Drive: 20.5 kW - Dimensions: 3500 x 2000 x 1200 mm can be retrofitted with: - new control system, new control cabinet, light curtain (1 cycle, 2 cycles, protection), new hydraulics, Iedpfxoycl Evo Acpotn - new seals - new occupational safety inspection

Condition: excellent (used), Felder RL 250 Extraction Unit Capacity: 6200 m³/h Extraction port: 250 mm Chip container capacity: 500 L Fire extinguishing system with water connection Itjdpfx Acox A Exuspsn Motor: 5.5 kW Weight: 750 kg Very good condition

Condition: excellent (used), mileage: 236,894 km, power: 189 kW (256.97 HP), first registration: 12/2000, fuel type: diesel, fuel: diesel, color: white, driver cabin: day cab, gearing type: mechanical, Year of construction: 2000, Equipment: ABS, air conditioning, electric window regulation, power mirror, = Additional options and accessories = - Power take-off (PTO) - PTO - Radio/Cassette player - Radio/CD player - Speed limiter - Toolbox = Remarks = VF642ACA00000889 = More information = Empty weight: 5.280 kg Carrying capacity: 4.720 kg GVW: 10.000 kg Technical condition: very good Visual appearance: very good Registration number: CW059YN = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. Iedpfx Aceymrfqepetn No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Condition: new, functionality: fully functional, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, total length: 7,760 mm, total width: 2,250 mm, total height: 2,980 mm, Year of construction: 2026, Equipment: ABS, airbag, Van-mounted aerial work platform Multitel MJE 250 on IVECO chassis Stock unit, year of manufacture 2026, like new Max. working height 24.60 m Max. lateral reach 12.50 m (230 kg), 16.50 m (100 kg) Transport dimensions L/W/H 7.85 / 2.25 / 3.00 m Max. load capacity 250 kg Weight 3,500 kg Chassis IVECO 35S14H MY 2024 Year of manufacture 2026, EURO 6e, radio, M+S tires Color: white Features: - Telescopic system with aluminum boom - Variable hydraulic outriggers - Fully proportional electro-hydraulic control - Basket size 1.40 x 0.70 x 1.10 m (250 kg) - Slewing range +/- 450° - Basket rotation +/- 120° - 1 button to return to the transport position (Home function) - 1 button for tower centering - 1 button for automatic setup - Movable basket arm - Basket and ground controls - Hand pump for emergency operation - 5 years of telemetry Special features: 230V socket in the basket, warning light for rotating turret, aluminum side panel 200mm, support plates Isdpfewziffjx Acpetn Available from stock in Langenhagen Sale only within Germany. All details of the offered vehicle are without guarantee. Typographical errors, errors and prior sale are subject to change. Leasing offers available through partner companies.

Condition: used, mileage: 681,000 km, power: 331 kW (450.03 HP), first registration: 08/2019, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, gearing type: automatic, emission class: euro6, Year of construction: 2019, Equipment: ABS, air conditioning, electronic stability program (ESP), Manufacturer DAF Model XF 450 4x2 SSC Euro 6 Year 2019 Condition Very good Serial Number 797951 Ref. nr. XLRTEH4100G280315 Reg. date: Hk: 450 Km: 681000 Gearbox: Automatic Eurotype: 6 Diesel tank: 1 Itedpfxjw R Ente Acpon Tank liter: 850 L Cabin heater: ? Air conditioning: ? Cabin type: Super Space Cab Radio: ? Refrigerator: ? Walkie: ? Disc brake: ? ABS: ? Engine brake: ? Tire Size: 315/70R22.5 Cover% left 50% Front suspension: Springs Suspension rear: Air Stool Fixed: ? Toolbox: ? Total weight: 18000 Kg Net weight: 7711 Kg Load capacity 10289 Kg

Condition: refurbished (used), Year of construction: 2017, functionality: fully functional, Manufacturer: Kallfass Verpackungsmaschinen GmbH Type: Bundle Wrapping Machine Super Wrap 500 Year of manufacture: 2017 Dimensions: approx. 2160 x 1340 x 2000 mm (LxWxH) Weight: approx. net 570 kg / gross 620 kg Technical data: Film: flat film, up to approx. 120 µm Film roll width: max. top 550 mm, bottom 550 mm Working height: 815 - 915 mm Passage width: 500 mm Passage height: 400 mm Itodpfsxl Dp Dex Acpon Electrical connection: 400 V three-phase Rated current: 7.2 A This particularly versatile banding machine operates with 2 flat film rolls. Product feed is fully automatic via an in-line conveyor belt. The sealing system is permanently heated, thermostat-controlled, and thus maintenance-free. The film rolls are simply placed on the machine, film feed is motorised. Inspection and demonstrations are possible at our premises by prior arrangement. Functional guarantee, no warranty.

Condition: like new (used), Year of construction: 2024, power: 6 kW (8.16 HP), Mafell ZAF 250 demonstration machine (max. 2-3 used for demonstration purposes) Item No.: 991201 Included in delivery: Iodpewazn Aefx Acpetn -1 milling head, complete with reversible blade; Order No. 202105 -1 support table, Order No. 205025 Maximum timber dimensions (W x H) at right angles: 500 x 250 mm Maximum timber dimensions (W x H) at 60°: 220 x 250 mm Length of support with scale: 3000 mm Feed speed: 0.9 - 2.2 m/s Installation area: 1.5 x 4 m Nominal idle speed: 6670 rpm Nominal power consumption: 6000 W Weight: 392.1 kg Three-phase motor: 400 V / 50 Hz Product details: -With the ZAF 250 Vario, all tenon shapes can be produced quickly, accurately, and efficiently. -Straight tenons, angled tenons, corner and ridge joints - with the compact ZAF 250 Vario, you're on the safe side. -An exact length scale can be adjusted using a stop. -The milling tool, specially developed for the ZAF 250, can be quickly adjusted for different tenon lengths and for tangential milling. -The ZAF 250 Vario features precise adjustment options and a clearly structured control panel. A built-in laser assists you in the exact positioning of the wood. Result: Milling cuts accurate to the millimeter in any wood! -After setting the tenon geometry, the milling head automatically follows the tenon shape and delivers the desired tenon – including face-off, shouldering, and chamfering. -The ZAF 250 Vario has an adjustable feed rate for hardwood applications. Area of application: -Tenon and tangential milling up to 60° -Materials used, e.g., solid wood and laminated timber Advantages: -Significant time savings – thanks to simple and quick adjustment of length, angle, and tenon dimensions. -Maximum wood dimensions: 500 x 250 mm at 0° and 220 x 250 mm at 60°. -Minimal space requirement – the pivoting head ensures the workpiece always remains in the same position. -No wood waste – fully vacuumable.

Condition: good (used), Code: 0298 Brand: OSAMA Model: S1R-250 - CE Standard Manual 1 roller gluing machine for edges and block wood, carpentry, furniture, laminated wood beams, and various - CE Standard Technical data: Max working length 250 mm Roller diameter 150 mm Iedpoyi E Hgofx Acpjtn Feed speed 28 m/min Motor power Hp 0,25 Working table height 800 mm Overall dimensions mm 1500 x 700 x 850 h Weight kg 100

Condition: used, weight max. 250 kg stroke / mm Load: 250 kg Iodpfx Asykvbqjcpotn Chain length: 2.5 m Weight: approx. 30 kg

Condition: used, Electric pedestrian stacker, pallet stacker JUNGHEINRICH type EJC Z14 250 ZT Serial no. 90358452 Year of manufacture: 2010 Iedsxvdv Eopfx Acpstn Rated load capacity: 1400 kg Load center: 600 mm Rated lift height: 2500 mm Fork length: 1150 mm Overall length: 2050 mm Overall width: 840 mm Overall height: 1700 mm Operating voltage: 24 Volt - Initial lift for negotiating floor thresholds - Duplex mast - 1676 operating hours (readout) - Battery from 2016, type 24V 3PZS 375 (24V/375 Ah) - Automatic charger Jungheinrich 24 volt, 50 ampere - Surcharge for new UVV inspection = 150,-- EUR net Weight: 1200 kg Good condition

Condition: used, Year of construction: 2000, grinding diameter 500 mm grinding length 1000 mm centre height 250 mm -major maintenance -New table geometry -partial painting of the interior grinding wheel equipment LEFT 400x63x127mm (standard) grinding wheel equipment RIGHT 300x40x127mm Internal grinding unit Ø120mm for HF spindles CNC control KELCO 120 C-axis for non-circular grinding. Kel-Poly B-AXIS: CNC-controlled B-axis KELCO 120: v constant 35m/s or 45m/s High-frequency internal grinding spindle Operating unit for MFV and MFZ spindles Hydraulic quill retraction for the tailstock Iedpoxzk Niefx Acpjtn NO micro-adjustment on the tailstock Spring-loaded quill insert Top table cooling Standard workpiece headstock MK 5 DIN 55026 size 5" Micro-adjustment for the standard workhead Dressing device on the lower table Active longitudinal positioning KELPOS, MARPOSS, mounted on the grinding head Tool measuring system KELSET, MARPOSS MARPOSS gate sensor Measuring control MARPOSS Minialsar prepared Paper belt filter

Condition: used, mileage: 704,656 km, power: 188 kW (255.61 HP), first registration: 09/2015, fuel type: diesel, tire size: 285/70 R19.5, axle configuration: 4x2, wheelbase: 5,600 mm, fuel: diesel, fuel tank capacity: 300 l, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: air, number of seats: 2, total length: 9,300 mm, total width: 2,550 mm, permissible axle load (axle 1): 5,000 kg, permissible axle load (axle 2): 8,480 kg, loading space length: 7,400 mm, loading space width: 2,440 mm, loading space height: 2,550 mm, Year of construction: 2015, Equipment: air conditioning, central locking, cruise control, electric window regulation, power mirror, spoiler, tail-lift, = Additional options and accessories = - Drivers seat comfort 5 - Heated exterior mirrors - Preparation OBU - Remote central locking - Roof Spoiler - Side door - Sun visor - Tailgate = Remarks = Tailgate Isdjytgidjpfx Acpotn Plateau length: 255 cm Superstructure Year of manufacture: 2015 Material: Plywood = More information = Technical information Number of cylinders: 6 Engine capacity: 7.698 cc Drivetrain Engine type: Volvo I SYNC Axle configuration Tyre size: 285/70 R19.5 Suspension: air suspension Front axle: Max. axle load: 5000 kg; Tyre profile left: 80%; Tyre profile right: 80% Rear axle: Double wheels; Max. axle load: 8480 kg; Tyre profile left inner: 80%; Tyre profile left outer: 80%; Tyre profile right outer: 80%; Tyre profile right outer: 80% Weights Empty weight: 8.537 kg Carrying capacity: 3.553 kg GVW: 11.990 kg Functional Tail lift: HOLLANDIA DHLM, tail lift, 2500 kg Maintenance APK (MOT): tested until 06/2027 Identification Registration number: 62-BLB-4

Condition: new, capacity 90 degrees: round 305 mm capacity 90 degrees: square 260 mm 350x200 saw band length 3375x27x0,9 mm band speed 18 - 100 m/min table height 880 mm total power requirement 1,5/1,8 kW weight of the machine ca. 0,84 t dimensions of the machine ca. 1,85 x 1,9 x 2,0 m Demonstration system for a SPECIAL PRICE!! Fully automatic miter band saw • miter left 45° automatic operation • miter left 60° semi-automatic operation (cuts without programming) • Material height sensor (automatic cut start recognition) • Frame and gear made from one piece, very quiet cut and very low vibration • Removable chip tray (disinfection) • Shockproof and ergonomic control panel with oil-resistant EPDM cover • Top access to the saw, material and feed unit • Hinged safety cover • Fine feed adjustment • Semi-auto. Cut! • Optimize work processes with CNC control Possibility to enter various parameters such as quantities and material lengths, automatic calculation of the cutting channel • CNC control for 10 different saw programs with 99 sub-programs for different lengths and quantities, e.g. 1 cutting program with various section lengths Itodpfx Acoupw R Aepsn • Automatic feed unit (CNC) via ball roller spindle incremental feed with automatic length compensation. Adjustable for section lengths of 2 mm to 9,999 mm, remainder length 170 mm. Inclusive: - Micro-spray device - Leveling elements

Condition: used, Year of construction: 2005, Technical details: swing diameter: 320 mm control: 840 D SIEMENS turning speeds: 5000 1/min spindle drive: 20 / 27 kW chucking diameter: 250 mm travel -x axis: 650 mm travel -z axis: 300 mm turret head: 12 Pos. tool holder: VDI 40 toolpiece turning speed range: 4000 1/min work piece power: max. 11,7 kW weight of the machine ca.: 8 t CNC vertical lathe, live tools, C-axis, high pressure pump 20 bar, 500l, filter, flush gun, 3-jaw chuc, EWAB loading station right, chipconveyor, approx. 23.500h "machine on", approx. 8.000h "spindle on" (in total) Iodpemcibwjfx Acpstn MACHINE WILL GET NEW (OVERHAULED) SPINDLE (0 hours) *

Year of construction: 2016, condition: as good as new (ex-display), machine/vehicle number: KBK FFM, DEMAG KBK 2 - crane sky crane runway indoor crane Pictures shows an example crane runway with the below components. These are also available individually! Please ask your crane runway about your dimensions Payload / lifting capacity from 80 125 250 500 to 1000 Kg KBK 2-R turnouts left and right (with conductor rail) KBK 2-R swivel discs 890mm (with conductor rail) KBK 2-R rails curved 15 30 45 60 90 degrees (with conductor rail) KBK 2-R rails (with conductor rail) The system can be delivered completely according to your wishes Ijdpfemmbn Tsx Acpjtn Rails, rail connectors, trolleys, end plates, drag cables, holders/hangers, accessories are available Chain hoists on request Very good, almost new condition Shipping by forwarding possible Demag KBK1 KBK2 and KBK3 rails are stock items!

Condition: good (used), Winch rope, crane rope, hoist rope, wire rope, stainless steel rope -Manufacturer: Manitowoc, crane rope Ø 17 mm -Length: approx. 250 m -Item No.: 03120320 D17 x 250M -Price/Fee: complete -other crane ropes also available -Transport dimensions: Ø 700 x 600 mm Iedomzkhnjpfx Acpjtn -Weight: 420 kg

Condition: used, Year of construction: 2001, Technical details: grinding length: 2500 mm grinding width: 800 mm workpiece height: 800 mm Table movement horizontal: Längshub: 2700 mm Table movement horizontal: Querhub: 800 mm table speed: längs: 1 - 35 / quer: 0 - 3 m/min feed: vertical: 0,001 / quer: 0,0025 mm/Hub magnetic plate size: 2500 x 800 mm Automatic grinding wheel feed: 0,001 mm distance table - spindle center: 900 mm grinding spindle speed: k.A. U/min dimensions of grinding wheel: 400 x 76 x 127 mm total power requirement: 36 kW weight of the machine ca.: 13,5 t Iodpfxovbgr Rj Acpetn dimension machine xH: 7,5 x 2,8 x 2,7 m dimension coolant device LxWxH: 1,8 x 1,0 x 0,92 m dimensions of hydaulic: 1900 x 800 x 1500 mm transport measurements machine: L: 8,0 x B: 2,4 x H: 2,85 m The machine is currently in the technical department. technical features: -Hydraulic unit -dressing device *

Condition: used, Technical details: diameter: 250 mm weight of the machine approx.: ca.31 kg Itsdpfxou Nk D Ro Acpjn revolution per minute: 3504 U/min 3 jaws lathe chuck - incl. 3 pcs of jaws external / internal *

Condition: used, Technical details: filter cartridge type: mechanisch air flow rate: 1.330 m³/h total power requirement: 40 kW weight of the machine approx.: ca. 300 kg Mobile extraction system with wet separator - Industrial extraction system Use for combustible dusts (for aluminum and magnesium dusts); EX protected Construction: sheet steel housing Dust cartridge dust class M 10 m² and dust class H 10 m² Iedpfsu Nv A Eox Acpetn Dust extractor: -size Ø 580 x 1,000mm -Pipe connection Ø 160 x 60mm -mechanical filter Dust container: -size Ø 580 x 550mm -with 4 wheels Ø 100x36mm) swiveling Water separator: -with 2" drain valve with hand lever -max. capacity 75 liter *

Condition: used, Technical details: weight of the machine approx.: 160 kg dimension machine xH: 0,58 x 0,50 x 0,3 m swivable: nein ° rotation movement: 360 Grad Itsdpfeu N E Dxox Acpjn Application: For auxiliary work e.g. scribing of graduations. -dividing attachment with chuck *

Condition: like new (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 051888, Used automatic disc cut-off saw Brand: Pedrazzoli Model: SB 350/45 AP Registration number: 051888 Year: 2004 Head block rotation mechanism for angled cuts up to 45° to the left with locking lever. Pneumatic and anti-burr removable vice. Itedperfw Iksfx Acpen Pneumatic cylinder for head movement, with brake for speed regulation. Transmission with double extensible pulley for variable speed from 15 to 90 m/s. Tilting head on adjustable self-lubricating bushings. 600 mm pitch feeder controlled by pneumatic cylinder. Repeat up to a maximum of 9 steps, to obtain a total stroke of 5400 mm. Maximum feeder clamp opening 160 mm. Programmable piece counter. Minimum final cut waste of 160 mm. Feeder speed regulating valve. Ammeter. Reverse gear. Emergency button and switch with padlock on the control panel. Blade lubrication-cooling system with electric pump. Coolant tank with removable pump for tank cleaning. Integral guarding designed for quick blade change. Blade disc Ø 350 mm. Cutting capacity: Round tubes 0°: 102mm 45° right: 102mm Square tubes 0°: 85mm 45° right: 90mm Rectangular tubes 0°: 158 x 85mm 45° right: 120 x 85mm Features: Three-phase 380V Dimensions: 1300 x 1350 x 1600 mm Work station height: 950 mm Weight: 420 kg

Condition: good (used), Manufacturer: John Scheer Meuselwitz Machine number: 6815.17 Type / Model: SFW 250 Table: mm Itedpfx Aerrdtxscpsn Sanding area: 1,000 x 250 mm Magnet: 1,000 x 250 mm Grinding wheels: mm Table speed: m/min Table spindle center max.: mm max. sanding height: mm Connection: 10.5 kW Accessories/equipment: Electromagnet Condition: good Weight: 5 tons Dimensions: mm

Year of construction: 2025, condition: new, Linear weigher with 100g up to 10,000g weighing range. Weighing/dosing of granular and chunky products. 2 weighing heads with load cells and 2 vibrating feeders allow fast and precision weighing. - Specifications: capacity weighing hopper: 20 L; number of weighing heads: 2; weighing range: 100-10,000g; accuracy: +/- 1-25g; max. speed of the machine in neutral: 20 cycles/minute; power: 220V, 1-phase; stainless steel version SUS 304. Isdpov Nmwiefx Acpotn That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.