Used Gear Shaper for sale (7,853)

Condition: good (used), Year of construction: 2008, Ref. -No.: 10666 Manufacturer: GLEASON - PFAUTER Type: P 1600 / 2000 S Year of construction: 2008 Type of control: CNC Control: SIEMENS SINUMERIK 840D Storage location: Halberstadt Country of origin: Germany Machine length: 6900 mm Machine width: 8400 mm Machine Height: 3700 mm Max. Wheel Diameter: 2000 mm Gear Width: 700 mm Weight Of The Machine Ca.: 35 t Further information: The machine is currently in active production and can be inspected under power and in operation by prior arrangement Dcsdpfxj Ahkyte Apmjp

Condition: used, Max. pitch dia. 250 mm (external spur) Max. pitch dia. 178 mm ((external helical) Max. pitch dia. 153 mm (Internal spur or helical) Max. face width 51 mm Max. helix angle 45 deg No of speed/range 156-515 strokes /min Cutting feed pr/stroke 0,006-0,0013 Djdpfx Apjy Anwiemocp Equipped with: Various change gears

Condition: excellent (used), functionality: fully functional, Gear shaper Tos OHA50A v, No. 0440253 Djdpfjzxnuwsx Apmscp In very good condition, rated 9/10.

Condition: excellent (used), functionality: fully functional, Machine no. MP 253/18 in good condition, can be inspected while running Max. Gear Diameter: 267 mm (11 inches) Dedpfxszxxnhj Apmjcp Max. Stroke / Face Width: 100 mm (4 inches) Max. Internal Pitch Circle Diameter (PCD): 152 mm Max. Module Capacity: Module 6 Table Diameter: 254 mm (10 inches) Table Bore: 76 mm (3 inches)

Condition: good (used), Year of construction: 2019, machine/vehicle number: 25667, Equipped with: Hydraulic Unit Sinumerik 840D sl CNC Control Slim Line Operator Panel OP012 W/12 TFT-Color Display 19" Machine Control Panel 20 Tool ATC CAPTO C6 Multifunctional Tool Carrier For Turning and Driven Tools One Fixed Tool Unit Assembled To The Compound Slide W/Coolant Thru The Turning And Drilling Tools, Coolant For The Driven Spindle From The Outside Drilling Spindle Additional Drill Spindle For Orientation Chip Conveyor Coolant Equipment Djdpfjy Tybnjx Apmscp -Including piping and shut-off valve and flow control switch -To supply coolant to tools for coolant and flushing through the cutting tools -To supply coolant for flushing the work piece and chuck -To supply coolant for flushing the working area Paper Band Filter Immersion Cooler High Pressure Coolant Pump, 40 Bar Through Tools Flushing Pistol, Hand Held Air Cleaner - Mechanical Separation "Mist Collector" Tool Life Display Remote Diagnostics Signal Lamp Automatic Door For Loading W/Shuttle Load and Unload Shuttle Swivel Loader Automation Cell Tuned for Part Pallet Conveyor For 20 Raw And Finished Parts Pallets Pallets Designed for Part 596500 Handling System SPC Station (Maximum O 270 mm, Maximum H 150 mm, Maximum Wt. 12 kg) NIO Station (Closing forward leading gravity) Skiving Software (Hardware: Software and user surfaces for skiving technology) Measuring Probe (For measuring diameters and length of the workpiece in the machine) Measuring Software for Teeth Measuring (MDK and Flank Line, Software and User) Measuring Program (Automatically measuring program for measure the position of the two gears to each other, after using sister tools) SPC (Every X workpieces the MDK needs to be measured) Tool Changer (Precut, measurer and final cut) Skiving Tool Identification (Hardware, software for the identification of the skiving tool after tool change) Hydraulic Diagrams Coolant Diagrams Lubrication Diagrams Electrical Wiring Diagrams Hardcopy of Diagrams CF Certificates Specifications: Workpiece Spindle: -Speed: 0-7000 l/min -Power: 55,2 - 59,7 kW Tool: Capco C6 Tool Spindle: -Speed: 0-6000 l/min -Power: 29 - 41 kW Machine Weight, Floor Space and Voltage Supply: -Operating Voltage: 400V, 3 Phases, 50 Hz -Control Voltage: 24 V -Lighting Voltage: 240 V, 50 Hz -Floor Space: 2,700 x 2,600 mm -Height: 4,000 mm -Total Weight, Approximate: 16,000 kg Longitudinal, Z-Axis: -Stroke: 800 mm -Rapid Rate: 24 m/min -Feed Force: 12 kN Transverse, X-Axis: -Stroke: 900 mm -Rapid Rate: 24 m/min -Feed Force: 12 kN Tool Spindle, B-Axis: -Range: -20 / +90 Degree Y-Axis for Spindle Unit: -Stroke: 200 mm -Rapid Rate: 12 m/min -Feed Force: 6 kN C-Axis Main Spindle: -Positioning Accurace: 9" Multifunctional Tool Carrier: -Power: 29 kW at 100% ED -Power: 41 kW at 44% ED -Torque: 141 Nm at 100% ED -Torque: 212 Nm at 44% ED -Spindle Speed: 0-6000 min-1 -B-Axis for Stepless Motion in a Range Of: -20/+90 Degree Tool Magazine: -Maximum Tool Diameter: 100 mm -Approximate Tool Length: 300 mm -Approximate Tool Weight: 12 kg Swivel Loader: -Maximum Workpiece Diameter: 270 mm -Height: 150 mm -Weight: 16 kg

Condition: excellent (used), functionality: fully functional, Machine no. 0426945 In good condition; can be inspected while running. Max. wheel diameter: 200 mm Min. wheel diameter: 14 mm Gear width: 50 mm Dcodszxzh Rjpfx Apmjp Min. module: 1 Max. module: 4 Cutter dimensions: -Standard diameter: 75 mm -Max. diameter: 100 mm Number of ram strokes per minute: 200-630 Hole in clamping table: 38 mm Main motor output: 1.5 kW Machine dimensions: 1350x950x1720 mm Machine weight: 1800 kg

Condition: excellent (used), Year of construction: 1983, Table diameter: 1000mm Maximum working diameter: 1250mm Module: 12 Maximum stroke: 200mm Dcjdpfx Ajzqkizjpmsp ALL BEARINGS HAVE BEEN CHANGED WITH NEW

Condition: excellent (used), functionality: fully functional, from a large DEMAG stock with numerous gearboxes GEARBOX SET Part Number 82452533 DH1000 3-speed, i=112.3 3 DEMAG gearboxes DH1000 in top condition, like new Original price per unit: €23,135.06 net, now €16,900.00 net per unit 4 Plug-in shafts / coupling shafts DH1000H16, Part No. 82417633, new. Original price per unit: €1,796.76 net, now €1,290.00 net per unit Thousands of DEMAG spare parts in stock Dcsdpfxjv T Ti Te Apmep Free shipping within Germany! Information: over 30,000 DEMAG spare parts and components in stock! Demag crane parts warehouse

Condition: good (used), Year of construction: 1957, functionality: fully functional, total length: 3,000 mm, total height: 2,600 mm, total width: 2,500 mm, overall weight: 6,000 kg, cutting height (max.): 400 mm, Gear hobbing machine, manufacturer: LIEBHERR, type: L 300, year of manufacture: 1958, max. workpiece diameter: approx. 300 mm, spindle: MK4, net price €16,000 (negotiable) Dcjde Aapgzopfx Apmop

Condition: used, total height: 2,000 mm, total width: 1,300 mm, total length: 5,900 mm, Year of manufacture: 1990 Colour: Green Empty weight: 7.500 kg Center-height: 250mm Table-length: 2300mm Dcedpfx Apozy E Tasmsp Travel grinding-spindel: 200mm Gear diameter: 300 mm Module range: 0.5 mm – 8 mm Helix angle: ±35° Max. workpiece weight: 100 kg - Year: 1990 - Documentation available: No - CE certificate present: No - Serial number: 018.0402 - Drive system: CNC - Control system brand: Optronic - Control system type: CNC D140 - Horizontal/vertical: Horizontal - Model: Gear hobbing machine - Min. module [mm]: 0.5 - Max. module [mm]: 8 - Max. workpiece width [mm]: 2300 - Max. workpiece height [mm]: 500 - Max. workpiece weight [kg]: 100 - Table length [mm]: 2300 - Transport dimensions: 5900mm x 1300mm x 2000mm (l x w x h) - Transport weight [kg]: 7500kg - Transport packages [pcs.]: 5 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: like new (used), functionality: fully functional, overall weight: 7,000 kg, This machine is configured with 4 fully electronic CNC axes and has integrated software that generates the automatic program. Description Maximum gear diameter: 400 mm Gear width: 76 mm Stroke: 82 mm Rotation: 150 - 700 rpm Module: min. 0.5 mm Module: max. 6 mm Machine weight: approx. 7500 kg Electrical equipment: – Operating voltage: 380/400 V – Protection: 20kva Machine with new CNC Siemens 808D Siemens drives and servomotors New update 2025 Screens for automatic program generation Automatic cycles NR12 Dcedpfx Aswvbqiopmop Included in Chip conveyor Coolant tank Automatic lubrication Digital pressure controls Hydrostatic guide

Condition: refurbished (used), functionality: fully functional, motor manufacturer: ROTOVAL, gearing type: mechanical, total height: 580 mm, ROTOVAL BS400 GEARED MOTOR DRIVEN BLOWING SERIEL NO 005199.01.01 5" AIR CONNECTION BUYER TO ARRANGE COLLECTION AND FREIGHT Dcsdpfxsv Sqv Uo Apmop

Condition: excellent (used), Year of construction: 1972, functionality: fully functional, For sale: this gear hobbing machine. It is connected and can be tested. Comes with numerous accessories. Technical specifications: Max. gear diameter: 7100 mm Gear width: 1500 mm Max. module: 45 Table diameter: 4000 mm Hob diameter x width: 400 x 500 mm Max. helix angle: 45 degrees Dcsdpfx Apexwlthjmsp Cutter diameter: 500 mm Cutter speed: 9–63 rpm Total power consumption: 47 hp Machine weight: 160,000 kg The machine has hydraulic workpiece balancing. A video of the machine can be sent via WhatsApp.

Condition: excellent (used), gearbox Dsde Ahubaspfx Apmscp fixed price loaded onto a truck

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, rotary table diameter: 450 mm, position of the milling head: Schwenkbar (45°), table diameter: 450 mm, total length: 5,600 mm, gear diameter: 500 mm, total height: 3,100 mm, total width: 3,600 mm, input frequency: 50 Hz, type of input current: three-phase, spindle speed (max.): 340 rpm, table bore: 125 mm, spindle speed (min.): 80 rpm, travel distance X-axis: 325 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 400 mm, overall weight: 14,800 kg, distance table to spindle center: 350 mm, tool diameter: 200 mm, controller manufacturer: Siemens Sinumerik 840D sl, drive type: Sinamics S120, control type: CNC control, Equipment: documentation/manual, rotational speed infinitely variable, A Pfauter PE 500 for the economical production of straight and helical spur gears up to module 12 and 500 mm in diameter – completely overhauled by SerWeMa with Siemens Sinumerik 840D sl, equipped with a gripper unit and a 32-position workpiece storage for unmanned operation. The machine is ready for operation in our hall in Chemnitz: you can inspect it under power, and if desired, we will mill your own sample part and you can take delivery of the machine here. No delivery time, no risk. Sold by Serwema Retrofit Solutions, the company that carried out the overhaul and knows the machine inside out. Dsdsz Et E Eopfx Apmecp The general overhaul included complete geometric overhaul by grinding and scraping, new roller bearings in the main drive and in the milling head, measuring and reconditioning the worm gear, overhauled or new ball screw drives, overhaul of hydraulics, lubrication and coolant system, and new electrical equipment with Sinumerik 840D sl, Sinamics S120 and new axis motors. An electronic generating gear controls all generating and single-part machining processes, and an NC-controlled crash recovery protects the tool and workpiece in the event of a power or phase failure. New paint in RAL 7035/5015 with oil and coolant resistant two-component paint, acceptance of geometry according to SerWeMa protocol based on DIN ISO 6545. The machine controls six CNC axes: X radial, Y tangential, Z axial, A milling head swivel, B milling cutter drive and C table drive. The SerWeMa gear cutting software guides you through workpiece and tool data via masks, without the need for programming: up to three position-oriented gearings per workpiece, each with its own tool, up to three cuts per gearing with simultaneous or counter-rotating movement, form corrections for convex, conical and convex-conical profiles, lead-in and lead-out phase correction, chamfer milling, dimension correction via tooth width, two-roll or two-ball gauge, measuring stop, shift strategy with defect management per generating cutter and cutting force monitoring with automatic retraction. Technologies: generating milling, single-part milling and worm gear milling both radially and tangentially. A hand-held device with a handwheel allows setup directly in the working area. Technical data: max. workpiece Ø 500 mm, max. module 12, max. milling cutter Ø 200 mm, max. milling cutter length 240 mm, shift travel 200 mm, milling cutter speed 100–450 rpm, swivel angle +25°/−45°, travel radial 325 mm (axis distance 25–350 mm), travel axial 400 mm (310–710 mm), table diameter 450 mm, table bore 125 mm, connection power approx. 60 kVA. Installation dimensions incl. automation approx. 7.2 × 4.5 × 3.3 m, weight approx. 16.8 t. Equipment: machine enclosure, chip conveyor, gripper unit with two grippers, workpiece storage with 32 positions, preparation for emission extraction (150 mm nozzle, Harting connector on the machine roof). Documentation complete in German: operating manual, electrical diagrams with parts lists, hydraulic and lubrication diagrams. Serwema optionally offers: trial part milling in our factory, additional milling arbors, assembly and commissioning at your location, operator training and a control system upgrade to Sinumerik ONE. Spare parts and service come from a single source, worldwide, even after the purchase.

Condition: excellent (used), Year of construction: 1974, I am selling this machine. It can be tested when connected. Maximum module 25 mm Maximum gear diameter 500 mm Dcjdov Nqq Tepfx Apmep Maximum machining length 3,000 mm Maximum table load 4,000 kg Maximum cutter diameter 250 mm Maximum cutter length 300 mm Total power 25 kW Machine height 2,100 mm Machine length 7,600 mm Machine width 2,800 mm Machine weight 27.1 t You can send a video of the machine via whatsapp.

Condition: new, TSUBAKI Croise Motor – 0.1 kW Right Angle Geared Motor – 80 Units NEW For sale: 80 brand-new and unused TSUBAKI Croise geared motors, sourced from industrial surplus stock. Available individually or in larger quantities. Technical specifications: * Manufacturer: TSUBAKI Motion Control * Product series: Croise Motor * Gear motor type: CMFA010-200H240VN6 * Motor type: TA010DV-FC1 * Motor power: 0.1 kW * Motor: Three-phase induction motor * Number of poles: 4 * Gear reduction ratio: 1:240 * Voltage: 200–240 / 345–415 V (50 Hz) * Frequency: 50 / 60 Hz * Motor speed: 1,340–1,410 rpm at 50 Hz * Protection class: IP55 * Insulation class: F * Duty rating: S1 * Gearbox output: Hollow shaft * Manufacturer: TSUBAKI Motion Control (Shanghai) Co., Ltd. * Article number: 1310666 Condition: Brand new and unused. Stored in protective packaging. Quantity available: 80 units. Suitable for industrial machinery, conveyors, automation systems, and other low-speed drive applications, subject to technical compatibility. Location: Rotterdam, The Netherlands Delivery terms: EXW Rotterdam Dodj Ahihnspfx Apmocp Worldwide shipping can be arranged upon request. Sold as is, where is, without warranty or returns.

Condition: good (used), Year of construction: 1978, max. pitch circle 152 mm Number of teeth 8-50 St. weight 7500 kg Technical data Djdpfj Agw R Eex Apmecp – Min./max. foot cone angle: 15° / 55° – Pitch circle diameter: 152 mm – Max. tooth height with 21° finished broach head: 10.7 mm – Max. tooth width at tooth root with 21°: 28 mm – Broach head diameter: 200 mm – Number of teeth range: 8–50 – Max. broach head diameter: .21" Workpiece spindle – Diameter of the tapered bore at the wide end: 99.219 mm – Clamping length at 304.8 mm: 15.478 mm – Taper depth: 15.875 mm – Diameter of the entire spindle bore: 22.225 mm Maximum tooth height: 14.8 mm Maximum tooth width at the root: 28 mm Maximum root angle: 55° Minimum root angle: 15° Milling head speed: 32.6-49.7 m/min Feed speeds (seconds per tooth): 2-3.1 Index range: 8-50 mm Diameter of taper bore at large end: 99 mm Taper per foot: 15.4 mm Depth of taper: 15.8 mm Countersink behind the taper: 57.2 x 77.9 mm Diameter of the bore through the spindle: 22.3 mm Power of the main drive motor: 10 HP Rotation of the main drive motor (60 Hz/50 Hz): 1800/1500 rpm Rotation of the hydraulic motor (60 Hz/50 Hz): 1800/1500 rpm Rotation of the coolant pump (60 Hz/50 Hz): 3600/3000 rpm Rotation of the chip screw motor (60 Hz/50 Hz): 1800/1500 rpm Footprint (L x W): 320 x 221 cm Total weight of the 726 REVACYCLE machine: approx. 9 t

Condition: new, Year of construction: 2025, SEW-EURODRIVE FAF87 DR2S112M8/4/TF – New Geared Motor For sale: New and unused SEW-EURODRIVE helical gear motor with flange mounting, manufactured in 2025. Technical specifications: Dcjdps Ahh Tpefx Apmop * Manufacturer: SEW-EURODRIVE * Type: FAF87 DR2S112M8/4/TF * Year of manufacture: 2025 * Motor power: 1.5 / 3.3 kW * Voltage: 400 V * Frequency: 50 Hz * Motor speed: 695 / 1395 rpm * Output speed: 940 / 1020 rpm (as indicated on the nameplate; please verify) * Output torque: 45 / 28 Nm (as indicated on the nameplate; please verify) * Protection class: IP55 * Mounting position: M4 * Condition: New, unused The unit is offered as shown in the photographs. Location: Rotterdam, The Netherlands Delivery terms: EXW Rotterdam

Condition: used, Year of construction: 2023, max. wheel diameter 200 mm Dcodpfx Aszy Satspmsp gear width 60 mm max. module 5 min. module 2 workpiece weight max. 6,0 kg total power requirement 4 kVA weight of the machine ca. 0,5 t dimensions 1,35 x 1,55 x 1,7 m Less used Gear deburing machine - 3-jaw chuck ZG 125 - One twist in 5- 120 sec. - After test maybe modil 1,25 possible - Working Unit 1, milling function - Working Unit 2, brush function - dust collector - automatic mode

Condition: used, Year of construction: 2001, tip circle diameter 1000 mm root circle diameter 50 mm max. module 18 mm min. module 1 mm max. wheel diameter 1000 mm gear width 630 mm Profile height max. 41 mm helical angle (left/right) max. 45 ° table diameter 720 mm max. table load 1500 kg grinding wheel diam. min/max. 180 / 400 mm grinding wheel width 60 (45/30) mm Dodpe Ahzh Iofx Apmscp grinding spindle speed 0 - 3100 U/min total connected load 30 kVa

Condition: used, Year of construction: 2015, overall weight: 16,000 kg, total height: 2,200 mm, total length: 4,410 mm, total width: 2,600 mm, GROB C6-A – Cold Rolling Machine Technical Data: Gear Module: up to approx. 2.3 Gear Diameter: approx. 8–80 mm Max. Clamping Diameter: approx. 315 mm Power: 25 kW Weight approx.: 16,000 kg Dimensions (LxWxH) approx.: 4410 x 2600 x 2200 mm Year of construction: 2,015 Terms of payment: 100% prepayment before pick-up Dcodpfx Apsz E Ra Homep Terms of delivery: From foundation under power: No

Condition: used, total height: 1,900 mm, total width: 2,200 mm, total length: 1,500 mm, Year of manufacture: 1959 Colour: Blue Dcsdpfjzkui Sex Apmep Empty weight: 2.500 kg Price: On request - Year: 1959 - Documentation available: Yes - Serial number: 80 - Drive system: Conventional - Power [kW]: 5.0 - Transport dimensions: 1500mm x 2200mm x 1900mm (l x w x h) - Transport weight [kg]: 2500kg - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2008, Technical details: max. wheel diameter: 400 mm max. module: 10 min. module: 0,3 weight of the machine ca.: 11,5 t dimensions of the machine ca.: 3,3 x 2,75 x 2,8 m max. number of teeth: 999 min. number of teeth: 5 Width of teeth: 0-300 mm pressure angle max.: 30 pressure angle min.: 14 Dedpfx Ae Ah Sc Iopmocp workpiece weight max.: 300 kg worm grinding diameter: 300...205 mm width of grinding worm: 125+0,7 / -0,5 mm boring diameter: 160 H7 mm

Condition: used, machine/vehicle number: 10314, The system, retrofitted by Comur in 2001, is still operational and has the following technical features: Dcsdpfs Ahraxex Apmep • CE certification • Speed control of the hammering action via inverter • External cooling tank • Magnetic chip conveyor • Hydraulic unit and workpiece clamping cylinder • Completely renovated electrical system