Used Extruder Gear for sale (7,864)

Condition: like new (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: Zsk 119 mc+, type of input current: three-phase, total length: 11,000 mm, year of last overhaul: 2024, total width: 1,500 mm, total height: 1,500 mm, overall weight: 18,000 kg, Coperion extruder, 1200 hp (930 kW), 380 volts, 50 Hz. Designed for high-moisture extrusion (TVP or HMMA, high-moisture meat analogue), with an output of 1 to 10 tons/hour. Screw diameter: 2 x 118 mm; ABB inverter for the 1200 hp motor; liquid dosing system; solid dosing system; control panel. Also available: Urchel cutting device and rotary IQF freezer. Kedpfx Aezti Tksg Usdt This extruder can also be used for dry or wet pet food. This equipment has very few operating hours.

Condition: excellent (used), Year of construction: 1974, functionality: fully functional, for sale second hand brick - machinery Kedpfx Ajzmxi Ujg Uedt Handle -extruder 600/560 Händle and Mixer MDV920b -filermixer Händle -roller mill 800x800 Händle WFZ880a - conveyer 40m x 80 cm gummi

Year of construction: 2013, operating hours: 7,700 h, condition: repair required (used), functionality: limited functionality, machine/vehicle number: 12090, This is a recycling extruder with side feeding for materials (flakes, pellets, etc.). The system is supplied with a control cabinet and a double vacuum system. The pelletizing system is missing at the end of the screw – it is not included in the scope of supply. The cylinder ends at the flange. The extruder is supplied without a screw. The frequency inverter for the main motor was replaced with a new unit 3 years ago. Installed power approx.: 474 kW Cooling water requirement approx.: 190 l/min Fresh water consumption approx.: 110 l/h Feeding system: • Diameter of the feeding screw: 200 mm • Drive for the feeding screw: 45 kW, frequency-controlled • Hopper capacity net 7 m³/250 ft³, • Gear motor 3 × 3 kW • 2 sight glasses in the hopper • 2 level indicators Extruder: • Diameter of the extruder screw: 145 mm • L/D ratio: 24 • Heating power: 50 kW • Extruder drive unit 280 kW Vacuum 1: • Screw length: 16 L/D • Heating power: 40 kW • Vacuum pump power: 11 kW • Vacuum capacity: 225 m³/h • Vacuum pressure: 33 mbar Vacuum 2: • Screw length: 16 L/D • Heating power: 40 kW • Vacuum pump power: 7.5 kW • Vacuum capacity: 190 m³/h • Vacuum pressure: 33 mbar Cylinder: Kdsdpfx Ajznz Ezeg Ust • Cylinder: Bimetal extruder cylinder, • Reinforcement layer 1.8–2.0 mm thick, • Hardness 63–65 HRC Installation conditions: • Voltage: 3 × 400 Volts • Permissible fluctuation max.: +5 % – 5 % • Frequency: 50 Hz Permissible fluctuation max.: +4 % – 4 % • Protective measure: Multiple grounding • Ambient temperature: min. 15 °C, max. 35 °C • Humidity max.: 90 % • Altitude of the installation site: 0 – 1000 m The machine was in operation at an R&D center in Israel. Since the company now operates a production facility in Europe, the R&D center is being closed. The machines will be transported to Europe at the owner's expense and can be delivered EXW at a port or at the production facility in Europe. The details for optimal transport need to be clarified. The machine price is without packaging.

Condition: ready for operation (used), Plastic Film Wash Line with Extruder Available in Ireland Can be seen running if necessary Sink Float Tank Centrifuge Washer Dryer Extruder Granulator Kjdpfx Agezylxij Uodt Shredder Everything required for the washing and recycling of Plastic Material 1 Tonne per Hour

Condition: ready for operation (used), Year of construction: 1978, functionality: fully functional, overall weight: 9,000 kg, TECHNICAL DETAILS Kedpfxozwmy Nj Ag Uodt Foot cone angle: 15–55° Pitch circle diameter: 152 mm Tooth height with 21° finishing milling cutter: max. 10.7 mm Tooth height: max. 14.8 mm Tooth width at the tooth root: max. 28 mm Milling cutter diameter: 200 mm Milling cutter diameter according to template: max. 0.21″ (?) Number of teeth range: 8–50 Indexing range: 8–50 mm (?) Machining speed: 49.7 m/min Milling cutter speed: 32.6–49.7 m/min Feed rate: 2–3.1 s/tooth Workpiece spindle Diameter of conical bore at the large end: 99 mm Clamping length: 304.8 mm Taper per foot: 15.4 mm Taper depth: 15.8 mm Countersink behind the taper: 57.2 × 77.9 mm Spindle bore diameter: 22.3 mm MACHINE DETAILS Power of main drive motor: 7.46 kW Speed of main drive motor at 60 Hz: 1,800 rpm Speed of main drive motor at 50 Hz: 1,500 rpm Speed of hydraulic motor at 60 Hz: 1,800 rpm Speed of hydraulic motor at 50 Hz: 1,500 rpm Speed of coolant pump at 60 Hz: 3,600 rpm Speed of coolant pump at 50 Hz: 3,000 rpm Speed of chip conveyor motor at 60 Hz: 1,800 rpm Speed of chip conveyor motor at 50 Hz: 1,500 rpm Dimensions & Weight Footprint: 3,200 × 2,210 mm Machine weight: approx. 9,000 kg

Condition: like new (used), Year of construction: 2013, BLOW EXTRUDER HDPE Model EuroTruder 75 Made by Euro-Stel, Belgium Kdedjwivdkepfx Ag Ujt YOM 2013 extruder: diameter 75x28 D - with neck sweder and granulate hopper mold is not included EXCELLENT CONDITION

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 570602, travel distance X-axis: 300 mm, travel distance Y-axis: 400 mm, controller model: Siemens Sinumerik 840 C, swivel angle A-axis (min.): -170 °, swivel angle A-axis (max.): 170 °, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel range, X-axis: 300 mm Travel range, Y-axis: 400 mm A-axis: -170° to +170° X-axis speed: 0.1–5,000 mm/s Y-axis speed: 0.1–5,000 mm/s Workpiece diameter with 1:10 reduction ratio: 300 mm Workpiece diameter with 1:1 reduction ratio: 212 mm Maximum number of teeth: 200 Minimum number of teeth: 6 MACHINE DETAILS Control system: Siemens Sinumerik 840 C Total power requirement: 38 kW Dimensions & Weight Space requirement: approx. 4,200 × 2,200 × 2,100 mm Machine weight: approx. 10,000 kg Kdsdpezwmx Eefx Ag Uet

Year of construction: 2023, operating hours: 200 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: 230608, 4. Main Extruder Type: Kdsdpfjzxxifex Ag Uot CWT95-Plus co-rotating twin-screw extruder; L/D 48 Machine Description: *IE5 AC 250 kW motor *Gearbox: Precise balancing principle applied to increase torque level; High safety factor design; Latest steel alloy material for gears, applied with special heat treatment and manufactured to a high level of precision; Imported NSK bearings and sealing rings; Special lubrication system combined with immersion and forced lubrication solutions; Latest generation plate heat exchanger configured for optimal cooling; Input/output rotation speed: 1480/600 rpm; Torque: 2x1990 N.M Oil pump: 1.5 kW With heat exchanger, flow meter, oil pressure gauge *Power Transmission: Compomac safety clutch torque limiter from Italy, with speed sensor *Extrusion Line: Screw diameter: 93 mm, L/D: 48:1; Maximum screw speed: 600 rpm; Screw configuration: modular structure, torque transmission via splines; Screw material: W6Mo5Cr4V2, surface hardness HRC58～64; Barrel configuration: modular structure, each barrel with a length of 4L/D; The inner surface of the linear material is made of α101, surface hardness is HRC62-64; Barrel No.1: Feeder for all possible components, No. 4 and No. 6 with a side feed port and a venting port. No. 8, 9, 11 with a suction port for degassing. The screw profile will be determined based on the requirement. *2 side feeders for lateral feeding *1 set of degassing adapted to the needs Liquid ring pump, 1m3 water tank, gas and vapor recovery system *Electrical Cabinet Enclosure: Rittal Heat Exchanger: Apex Variable Frequency Drives: ABB PLC: Siemens Components: Schneider Electric *Spare Parts One set of screw and barrel elements and one set of shafts will be delivered with the machine.

Condition: ready for operation (used), Year of construction: 1990, functionality: fully functional, machine/vehicle number: 018.0402, gear diameter: 300 mm, controller model: Optronic CNC D140, workpiece width (max.): 2,300 mm, workpiece height (max.): 500 mm, center height: 250 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Gear diameter: 300 mm Module range: 0.5–8 mm Pressure angle: 35° Kdjdpfx Agezzba Ss Ujt Max. workpiece width: 2,300 mm Max. workpiece height: 500 mm Max. workpiece weight: 100 kg Center height: 250 mm Table length: 2,300 mm Grinding spindle travel: 200 mm MACHINE DETAILS Control system: Optronic CNC D140 Dimensions & Weight Dimensions (L x W x H): 5,900 x 1,300 x 2,000 mm Net weight: 7,500 kg Shipping packages: 5 units

Condition: like new (used), Year of construction: 2020, functionality: fully functional, type of input current: three-phase, Zhejiang Baina 150 20D 1000Kg/h extruder The extruder is almost new and is available immediately with a few operating hours. Manufacturer: Zhejiang Baina Type: E150-01-00 Year of manufacture: 2020 External dimensions (L × W × H): 4200 × 1600 × 1500 mm Side rollers; the driving force is provided by the screw, with active dosing Coordinated operation of the feed roller gear drive and the screw drive, with automatic lubrication system Screw material: 38GrMoAcA Screw hardness: HRC 65–68 Steel bushing hardness: HRC 65–70 Nitriding depth: 0.4–0.7 mm Screw design: Design with suction groove for vacuum suction Pressure control, pressure protection value adjustable between 0–35 MPa; with temperature sensor. Screw diameter: 150 mm Screw speed: 1–50 rpm Maximum output: Approx. 1000 kg/h Number of heating stages / output: 7 × 6 kW Cooling stage: 1 stage (side rollers) Vacuum pump output: 2.2 kW Temperature control Automatic heating and cooling control with electromagnetic valve Circulation pump: Weile Cooling water pressure: 0.15–2 kg/cm² Temperature control accuracy: ±1 °C Screw and gear connection: Involute gear connection Motor and reducer drive: Belt drive Hardened gear type: ZLYJ420-28-I (involute gear reducer) Motor power: 160 kW Kjdpfx Ajy Ez Erog Usdt Total installed power: 204 kW Speed ​​control: Frequency converter control

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2020, total length: 495 mm, total height: 520 mm, total width: 457 mm, construction height: 300 mm, construction width: 240 mm, No minimum price – guaranteed sale to the highest bidder! Kjdpfszx S D Aox Ag Usdt EXW – Dismantling and loading are to be organized by the buyer! The system will be available from November 2026! TECHNICAL DETAILS Build volume X-axis: 330 mm Build volume Y-axis: 240 mm Build volume Z-axis: 300 mm Filament diameter: 2.85 mm Nozzle diameter: 0.25 mm, 0.4 mm, 0.8 mm Printing speed: < 24 mm³/s XYZ resolution: 6.9 / 6.9 / 2.5 µm Layer resolution with 0.25 mm nozzle: 60–150 µm Layer resolution with 0.4 mm nozzle: 20–200 µm Layer resolution with 0.8 mm nozzle: 20–600 µm MACHINE DETAILS Technology: Fused Filament Fabrication (FFF) Print head: Dual extrusion print head with automatic nozzle lift system and interchangeable print cores Supported materials: PLA, Tough PLA, Nylon, ABS, CPE, CPE+, PC, TPU 95A, PP, PVA, Breakaway Operating temperature: 15–32 °C Relative humidity during operation: 10–90 % RH, non-condensing Non-operating temperature: 0–32 °C Supplied software: UltiMaker Cura, Cura Connect Supported operating systems: macOS, Windows, Linux Plugin integration: SolidWorks, Siemens NX Supported file types: STL, OBJ, X3D, 3MF, BMP, GIF, JPG, PNG Printable formats: G, GCODE, UFP Connectivity: WLAN, LAN, USB Display: 4.7 inch (11.9 cm) color touchscreen Monitoring: Live camera Operating noise: 50 dBA Build plate temperature: 20–140 °C Build plate leveling: Active leveling Nozzle temperature: 180–280 °C Nozzle preheating time: < 2 min Build plate preheating time: < 4 min from 20 °C to 60 °C Power consumption: 500 W Dimensions & Weight Machine dimensions: 495 × 457 × 520 mm Machine dimensions with Bowden tubes and spool holder: 495 × 585 × 780 mm Net weight: 20.6 kg Shipping weight: 29 kg Shipping carton dimensions: 650 × 600 × 700 mm FEATURES Dual extrusion print head Automatic nozzle lift system Interchangeable print cores Heated glass build plate Heated aluminum build plate PEI build plate Active build plate leveling Abrasion-resistant dual-gear feeder NFC scanner for material recognition Color touchscreen Live camera Spool holder with material guide Print Core AA 0.4 mm, 2 pieces Print Core BB 0.4 mm, 1 piece Nozzle cover, 3 pieces Power cable User manual CE marking

Condition: excellent (used), Year of construction: 1983, operating hours: 87,618 h, functionality: fully functional, machine/vehicle number: DS 85610, overall weight: 4,000 kg, total length: 5,200 mm, total width: 1,700 mm, total height: 2,500 mm, power: 75 kW (101.97 HP), input voltage: 380 V, input frequency: 50 Hz, input current: 160 A, Original WEBER 8.8 extruder with extended barrel to model 8.22. Comes with new and original screws from Weber. HMI control panel, previously used in a cleanroom environment. Includes hopper. Machine is offered as is. Kdjdpfx Aox Apckjg Uet

Condition: new, Year of construction: 2018, New R&B Plastics Machinery MAX 5-Extruder System Heavy-duty, purpose-engineered multi-extruder system manufactured by R&B Plastics Machinery, consisting of four MAX 1-1/4" × 30:1 extruders mounted over one MAX 2" × 24:1 main extruder, complete with specialty mounting structure, material loaders, heated adapters/hoses and centralized Allen-Bradley PLC controls. The system was fully assembled, integrated, inspected and pre-shipment tested at R&B's Saline, Michigan facility and has never been placed into production. Extruders (4) R&B MAX 1-1/4" × 30:1 X102 or equivalent bimetallic barrel liners Interchangeable standard-output screws Rossi gearboxes with high-temperature Viton seals 5 HP Marathon AC motors Four heat/cool barrel zones Heaters, high-speed blowers & dual thermocouples Rupture discs & pressure transducers Watlow melt-temperature probes & mica band heaters Stainless-steel hoppers Adjustable 45° feed-throat/carrier assemblies (1) R&B MAX 2" × 24:1 Main Extruder Non-vented, air-cooled configuration MAX IMPACT high-output screw Colmonoy 56 flight lands X102 or equivalent bimetallic-lined barrel 25-30 HP Marathon Blue Max TEFC motor Rossi helical gear reducer Maximum screw speed: 100 RPM Three individually controlled heat/cool zones Melt-temperature & pressure transducers Stainless-steel hopper and water-cooled feed section Multi-Extruder Mounting System Kdedpozz Thbefx Ag Uet Engineered for 4 × 1-1/4" extruders over 1 × 2" main extruder Heavy-duty welded mounting frame Individual adjustment posts & safety stops Specialty extended main base Material Handling & Transfer (5) Foremost B-6-2 self-contained vacuum loaders (4) R&B heated adapter assemblies (4) heated hose assemblies, up to 12 ft R&B MAX PLC Control System Allen-Bradley CompactLogix PLC 15" Allen-Bradley operator control screen (4) 5 HP + (1) 25-30 HP Allen-Bradley VFDs PLC-controlled extruder heating/cooling Air-conditioned main electrical cabinet EWON remote-access system Integrated wire trays and electrical distribution Designed for 380 V / 3 Phase / 50 Hz Open-architecture electrical drawings, machine logic and documentation Condition: NEW / Never Used Complete documentation and operating manuals available. Important Scope Information Profile/die tooling and water bath are not included. Proprietary zipper/profile tooling and associated proprietary components are not included. The control cabinet contains provisions for additional downstream equipment, including water-bath and winder connections; these provisions should not be interpreted as inclusion of that downstream equipment in this R&B system listing. Equipment is stored and ready for shipment. Inspection available.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2019, total length: 495 mm, total height: 780 mm, total width: 585 mm, overall weight: 17 kg, No minimum price – guaranteed sale to the highest bidder! EXW – Dismantling and loading are to be arranged by the buyer! The unit will be available from October 2026! TECHNICAL DETAILS Build volume X-axis: 230 mm Build volume Y-axis: 190 mm Build volume Z-axis: 200 mm Layer height: 0.06–0.4 mm Build plate: Heated glass plate Build plate temperature: up to 120 °C Filament diameter: 2.85 mm Nozzle temperature: up to 280 °C Print speed: up to 150 mm/s Material flow: up to 24 mm³/s Compatible Print Cores: AA 0.4; BB 0.4; AA 0.25; AA 0.8; BB 0.8; CC 0.4; CC 0.6; DD 0.4 MACHINE DETAILS Technology: Fused Deposition Modeling (FDM) Software Print preparation: UltiMaker Cura, Cura Cloud Printer management: UltiMaker Digital Factory Supported operating systems: Windows, macOS, Linux Environmental conditions Operating temperature: 15–32 °C Operating humidity: 10–90 % RH, non-condensing Storage temperature: 0–32 °C Non-operating humidity: 10–90 % RH, non-condensing Placement: Away from direct sunlight Power supply: 100–240 V AC Mains frequency: 50–60 Hz Kodpjzx S Dvefx Ag Uedt Power consumption: 350 W Operating noise: < 50 dB(A) Connectivity: WLAN 2.4 GHz, LAN, USB Monitoring: HD camera Dimensions & Weight Dimensions: 495 × 585 × 780 mm Net weight: 14.4 kg Weight in operation: approx. 17 kg EQUIPMENT Dual-extrusion print head Automatic nozzle lifting system Interchangeable Print Cores Dual-gear feeder Filament flow sensors Dual spool holder with NFC detection Color touchscreen HD camera Heated glass plate PEI print bed Spool holder with material guide Power cable Ethernet cable USB stick User manual CE marking Print Core AA 0.4 – 2 pieces Print Core BB 0.4 – 1 piece Nozzle cover – 3 pieces

Condition: ready for operation (used), Year of construction: 1991, functionality: fully functional, travel distance X-axis: 140 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 300 mm, workpiece length (max.): 400 mm, The design of the basic machine is characterized by the following features: - Horizontal arrangement of the workpiece spindle; vertical arrangement of the milling spindle or milling head - The workpiece is held between the workpiece spindle housing (left) and the tailstock (right) - The radial slide is mounted on the base (X-axis) - The axial slide moves on the radial slide (Z-axis) - The swivel milling head is equipped with an automatic angular adjustment (A-axis); the swivel slide (Y-axis) moves tangentially to the workpiece diameter TECHNICAL DETAILS Travel range, X-axis: 140 mm Travel range, Y-axis: 100 mm Travel range, Z-axis: 300 mm Tailstock travel, W-axis: 420 mm Swivel angle, end mill head, A-axis, left: 50° Swivel angle, end mill head, A-axis, right: 60° Largest module that can be milled with involute cutters according to DIN 8002: 4.5 mm Largest module that can be milled for high-performance milling: 3.0 mm Number of teeth: 2–999 Workpiece diameter with manual loading: max. 200 mm Workpiece diameter with automatic loading: max. 150 mm Workpiece length: max. 400 mm Milling spindle speed range, B-axis: 0–1,500 rpm Workpiece speed, C-axis: 0–350 rpm Milling tool data Milling tool diameter: 40–102 mm Milling tool length: max. 230 mm Radial front diameter (standard): 16–32 mm Milling coordinates Z-axis: 100–400 mm X-axis: 130–150 mm Y-axis (face of milling spindle): 50–230 mm Ksdpfx Ajzwmyijg Ujdt W-axis (face of tailstock spindle): 165–585 mm Feed rate, X-axis: 3,500 mm/min Feed rate, Z-axis: 3,500 mm/min Feed rate, Y-axis: 4,000 mm/min Feed rate, W-axis: 5,500 mm/min Feed rate, V-axis (portal loader): 80,000 mm/min EQUIPMENT IBH control system Loading device A wide range of accessories

Year of construction: 2009, condition: used, Used Baker Perkins model MP24PH 40:1 L/D twin screw extruder. - Manufacturer: Baker Perkins - Model: MP24PH 40:1 L/D - Number of screw: Twin Screw Extruder - Rotations: co-rotating - Screw speed range: 0 - 600 rpm - Motor power: 11.2.5 kW, variable speed Barrel: - Maximum operationg temperature: 200°C Kdjdpfxozvn Dao Ag Ust - Nominal barrel lenght: 40:1 L/D - Barrel type: one piece horizontally split clamshell barrel - Heating: electrically heated via cartrige type heaters - Cooling: water-cooled via cored barrel backing block Includes: - Touch HMI integrated in switchboard - Single screw powder feeder - Liquid feed system - liquid hopper, gear pump and flow meter

Condition: used, functionality: fully functional, color: green, The calender consists of the following units: - A set of 4 rollers - A set of roller drives - Frames - A running gear - A control cabinet The set of rollers consists of 4 rollers of different diameters. Kdjdpfx Aowcxufsg Ujt The rollers are mounted on a common frame, which allows you to change their mutual position (change the gap between the rollers). The gap between rollers 1 and 2 is adjusted using adjustment screws driven by MRA-63 type worm gears. The gap between rollers 2 and 3 is adjusted manually by turning the adjustment screws. Each roller has an individual drive, allowing you to change the rotational speed. The rotational speed of the rollers and the thickness of the plate are set on the operating panel of the Calender control cabinet. A pressure roller and disc knives for cutting the outer edges of the plate are installed above the last roller (No. 4). The knife spacing is adjustable, which allows the production of boards of various widths. Roller diameter: Roller 1 – 515.00 mm Roller 2 – 315.00 mm Roller 3 – 315.00 mm Roller 4 – 355.00 mm Roller 5 – 95.00 mm Disc knife 6 – 200.00 mm - Roller width 230 cm - Roller working width 210 cm - Total width 300 cm - Height 250 cm - Extruder departure / arrival (calender-extruder) 70 cm - Length with arrival 350 cm Power supply - 3 x 400 V (32A) - Motors 4 x 0.75 kW - Fans 2 x 0.25 kW - Pumps 2 x 1.1 kW - Access motors 2x 0.25 kW - Central pump 1 x 0.5 kW - Roller pressure motors 2 x 0.25 kW - Razor blade motors 2 x 0.15 kW

Condition: used, functionality: fully functional, Used Lehmann UMT extruder. Suitable for a wide range of applications including food, biogas, substrates, wood fibre, and more. Contact for further information. Ksdpfx Agsyxfg Tj Uodt

Condition: used, Year of construction: 1970, functionality: fully functional, BARMAG extrusion system consisting of: 1x BARMAG BA KEP 90-26.3-S extruder 1x BARMAG 9E4-11-103/Z transmission gear 1x AEG G 16.04 drive motor with forced ventilation, 460V, 112A, 46.7KW, 3150rpm, rated at 330V, 2.21A 1x SCHOLZ dosing unit, incl. Feed hopper 1x Control unit System features: Kdodpfx Ajuakzzjg Uot - Single-screw extruder, built around 1970 - Throughput 200 kg/h - Conversion to new screw geometry in 2016 - Screw diameter 90 mm - Screw length 2769.5 mm - Process length 26.3D - Geometry: Feed - Barrier - Mixing section - Screw material: 1.8550, nitrided - DC motor - Technical documentation This system is available in three versions. Subject to prior sale. Please send inquiries via email only. Note: The machine is still installed and can be inspected on site. The buyer must dismantle it and arrange shipping themselves. This is not included in the offer price.

Condition: used, BARMAG extrusion system consisting of: 1x extruder BARMAG KEP 200-26,3,3-S 1x transmission gear KNÖDLER FZ 6000 2_Z-ED 200 - NEW, year of manufacture 2016 1x drive motor SIEMENS 1GG6208 with external ventilation 470V, 468A, 206kw, 2600rpm, Err. 310V, 6.8A - NEW, year of manufacture 2015 1x control unit 1x dosing unit SCHOLZ incl. Feed hopper with level sensor - year of manufacture 2004 System features: - Single-screw extruder, year of manufacture ca. 1973 - Throughput 800kg/h - Conversion to new drive + gearbox in 2016 - Screw diameter 200mm - Screw length 5266mm - Process length 26.3D - Geometry: feed - barrier - mixing section - Screw material: nitrided steel Kjdpeuak Nlsfx Ag Usdt - Technical documents Subject to prior sale Please send inquiries by email only Note: The machine is still installed and can be inspected on site. The buyer must dismantle it himself and organize shipping. This is not part of the offer price.

Year of construction: 2018, condition: excellent (used), functionality: fully functional, TYPE 318:: COATING DRUM 1600 For the application of various taste and aroma giving materials by using various aromatising techniques. The special drum profile offers following main advantages: - optimal rolling of the product for uniform coating - minimum possible friction/damage of the product surface - no hidden corners, easy to clean, bacteriologically optimal surface. Adjustable drum speed, by frequency controlled AC gear motor 1.5 kW. Kdsdewbqx Hopfx Ag Uot Drum diameter: 1600 mm Drum length: 4000 mm Drum height : 3270 mm TYPE 284:: DRUM DRIER/ROASTER 1600 PTFE Newly developed short and medium range infrared roaster for special thermal post treatment of expanded extrudate. The whole drum is coated with a low-wear PTFE-layer. This secures processing of extremely sticky coated extrudates. Unlike the conventional hot air drying process, this drying system works with a very high degree of efficiency. The whole machine is made of rust free stainless steel. The radiation elements are attached to a common carrying arm in the drum. The roasting drum runs on special, low-noise carrier rollers and corresponds to the safety regulations and is equipped with a corrosion free covering to reduce energy losses. The rpm of the drum is adjustable continuously. The drive is carried out by a three-phase motor 1.5 kW. Drum diameter: 1600 mm Electrical heating power: 126 kW Drum length:4300 mm Drum height : 2960 mm TYPE 361:: COOLING DRUM 1600 For cooling of sticky and hot extruded products under rotation for separation. The cooling is carried out with the help of room air, which is blown controllably into the drum by a middle pressure blower 1.85 kW AC. Please note: depending on the product characteristics, additional cooling might be necessary for breakfastcereals before the product can be packed. Drum diameter :1600 mm Drum length: 4000 mm Drum height : 2890 mm

Year of construction: 2016, condition: excellent (used), functionality: fully functional, Make: Reifenhauser Model: Mirex-MT-V 1-RZE 120-1800 Year: 2016 Condition: Excellent Use: PET / PP / PS Foil or Sheet PET: Thickness Range: 0.25 - 2.2mm Output: 2,000 kg/h Max Sheet Width: 1600mm Extruder: RZE 120mm Electrical Supply: 3 x 480V 60Hz with N Calendar Roll Width: 1800mm Calendar Roll Diameters: 450 / 700 / 700mm Silicon Bath Max Sheet Width: 1600mm Ksdpfjvbcbuox Ag Uodt Silicon Bath Sheet Thickness Range: 0.15 - 1.5mm 4 Position Winder WOB 1800 for double web winding included. All details are subject to change and/or errors. All equipment is subject to availability and/or prior sale.

Condition: used, Perry is offering a high quality used Winkworth model ZX190-9 stainless steel mixer / extruder. Manufacturer: Winkworth Material: Stainless steel Year of Manufacture: 2018 Capacity: 190 litre (product dependent) Type Of Blades: (2) stainless steel wing blade shafts Motor: 11kw motor & gearboxes Also Includes: main electrical control panel - Separate ICS model i-Temp ci 90t 18 heating/cooling unit. - External jacket rated 3.5 bar design pressure at 250 deg.c. - Top mounted Coperion model P30-BV-150 vacuum sequencing receiver with rotary lock valve. Kodpezfh Uqsfx Ag Usdt This unit is ready to run. A video of this mixer is available below.

Condition: like new (used), functionality: fully functional, overall weight: 7,000 kg, This machine is configured with 4 fully electronic CNC axes and has integrated software that generates the automatic program. Description Maximum gear diameter: 400 mm Gear width: 76 mm Stroke: 82 mm Rotation: 150 - 700 rpm Module: min. 0.5 mm Module: max. 6 mm Machine weight: approx. 7500 kg Electrical equipment: – Operating voltage: 380/400 V – Protection: 20kva Kdsdpswvbqiofx Ag Uot Machine with new CNC Siemens 808D Siemens drives and servomotors New update 2025 Screens for automatic program generation Automatic cycles NR12 Included in Chip conveyor Coolant tank Automatic lubrication Digital pressure controls Hydrostatic guide

Year of construction: 2003, condition: refurbished (used), Stock-No. 2086 twin-screw compounding extruder BERSTORFF type ZE 60 A - UT screw size 2 x 64 mm - 32 LDscrew speed up to 625 r.p.m. adjustable Capacity +/- 800 kg/h depending material specifications Drive from 197 kW up to 350 kW possible, optional by appoinment FLENDER gear-box L/D 34 - 40 LD , by appointment , due to your material formula needs 1x venting port new control board optional - equipment against additional price: screen-pack-changer / melt-filtration unit pelletizing material feeding , loss-in-weight blenders pellet classifier screw configuration and more Please inform about your needs to send you a detailled quotation, thank you Kdedpfx Agjh Eydue Ust All ex our stock Wuppertal-Germany available