Used Gear Tester for sale (7,895)

Year of construction: 2023, operating hours: 2 h, condition: used, machine/vehicle number: 5767/78631, Axle distance: approx. 40-175 mm, max. test piece diameter: approx. 200 mm, net weight: approx. 110 kg, adjustable measuring force: approx. 1-11 N, power consumption: approx. 0.2 kW, control/switch FRENCO, serial number: 30020-000147, various measuring accessories, 1 operating panel, single-track/single-door, 1 DELL flat screen, approx. 22 inches, year of manufacture: 2022 Iodpfsx Aklmjx Addetb

Condition: used, max. wheel diameter 0-200 mm Itsdetuxa Uopfx Addsb max. module 25 min. module 0,5

Condition: used, Chroma Type: ATE 17020 The Chroma 17020 is a highly professional, modular test system for lithium-ion & other battery pack qualification. Particularly strong in: - Lifetime testing, BMS verification, and validation of complex charging cycles - High energy recovery – up to 85% efficiency - Flexible expansion through numerous channels or higher current ranges - Enterprise deployment with extensive safety features & data persistence Technical data – Chroma ATE 17020 PTS Feature Specification Model: Chroma ATE 17020 PTS System type: Regenerative battery pack test system (charge/discharge test) Channel output: 600 W to 60 kW (modular and scalable) Ijdpswwrxaofx Addotb Total output: Up to 600 kW (depending on configuration) Voltage range: 20 V / 60 V / 100 V / 200 V / 500 V Current per channel: Depending on module: from a few amps up to >300 A per channel Parallel operation: Yes, for higher current up to 2,600 A Current and voltage accuracy: ±(0.05% of reading + 0.05% of range) Power accuracy: ±0.1% Transition time (charge/discharge): < 50 ms Sampling rate (measured data): up to 50 kHz (with BatteryPro) Data logging: Cyclic, 10 μs – 1 s / memory for 60 min power failure Test modes: CC, CV, CP, CC-CV, DCIR, pulse, drive cycle, dynamic profiles Number of channels: Up to 60 channels (expandable) Communication: CAN, S-Bus, Ethernet, USB Software: Chroma BatteryPro (test programming, real-time monitoring) Protection functions: OVP, UVP, OCP, UCP, OTP, reverse polarity, wire loss, delta V/I, etc. Energy recovery: Yes – up to 85% energy efficiency, grid-friendly (THD < 5%) Cooling: Fan cooling, low waste heat due to energy recuperation Temperature monitoring: Optionally integrable, range 0–90°C ±2°C Dimensions & weight: Depending on configuration (e.g. 19″ rack, approx. 300 kg) Mains connection: 3-phase, 400 V AC (depending on model) Applications: E-mobility, battery development, quality assurance, cell research Weight: approx. 455 kg Condition: used Scope of delivery: (See picture) (Specifications and technical data are subject to change and errors excepted!) If you have further questions, we are happy to assist you by phone.

Condition: excellent (used), functionality: fully functional, Year of construction: 2002, operating hours: 48,651 h, Mazak Space Gear-510 MKII 2.5 kW Year of manufacture December 2002 - after renovation!!! Very good condition! Meter reading 48651 hours Operating system Fanuc L-64 Isdpfx Adewqr Tdodetb

Condition: excellent (used), functionality: fully functional, Year of construction: 2007, operating hours: 41,417 h, Mazak Hyper Gear 510 4.0 kW Year of production February 2007 Meter reading 41417 hours Itsdpfswqr Twex Addsb MAZATROL operating system very good condition Technical data of the MAZAK HYPER GEAR 510 laser cutter - laser power: 4 kW - feeds in the X/Y/Z axes: 3070/1545/100 mm - dimensions of the work table (length x width): 3000 x 1500 mm - maximum weight of the workpiece: 930 kg - maximum dimensions of the workpiece (length x width x height): 3050 x 1525 x 25 mm - laser type: CO2

Condition: excellent (used), Pharmatron 5Y tablet tester The hardness tester is ideal for measuring the breaking of tablets. Cycle time 25 tablets / 3mins, up to 33mm tablet diameter, 1Ph Isdjiy Nm Ropfx Addjtb

Condition: used, Adixen / Alcatel Alcatel ASM 122D Helium Leak Detector – mobile For sale is a professional Adixen / Alcatel ASM 122D helium leak detector from industrial use. Itedsyapwkspfx Addeb This device is designed for highly precise leak detection and leak testing with helium and is used in industrial settings, research, and laboratories. It allows for the detection of extremely small leaks in vacuum systems, pipelines, valves, vessels, and assemblies. The leak detector features an integrated forepump and turbomolecular pump, various operating modes (vacuum / sniffer), as well as a digital display with automatic functions. Technical data (excerpt): Manufacturer: ALCATEL Model: ASM 122D Measurement principle: Helium mass spectrometer Detection limit: up to approx. 1 × 10⁻¹² mbar·l/s Power supply: 200–240 V / 50–60 Hz Power consumption: approx. 800–1200 W Made in France Weight: approx. 100 kg Condition: used Scope of delivery: (see picture) (Specifications and information subject to change and error!) If you have any further questions, please feel free to contact us by phone.

Condition: used, Adixen Adixen ASM 142 Helium Leak Detector Description: For sale is an Adixen ASM 142 helium leak detector. This device is suitable for highly precise leak detection in vacuum and pressurized systems and is used professionally in industry, laboratories, and research. The ASM 142 is equipped with an integrated turbomolecular pump, various measurement and test modes, as well as a clear digital display of the leak rate. Thanks to its sniffer mode and automatic test cycles, the device offers flexible application possibilities. Highlights: - Very high measurement accuracy - Vacuum and sniffer operation - Graphical & acoustic leak indication - Robust industrial design on casters Technical Data: Test gas: Helium Dimensions: approx. 110 × 60 × 70 cm Detection limit: down to approx. 5 × 10⁻¹² mbar·l/s Power supply: 230 V / 50–60 Hz Power consumption: approx. 1000 W Weight: approx. 100 kg Iedeyankiepfx Addjtb Condition: used Scope of delivery: (see picture) (Specifications subject to change and possible errors!) For further questions, please feel free to contact us by phone.

Condition: used, Year of construction: 1992, max. wheel diameter 1400 mm gear width 400 mm max. module 25 min. module 1 Iedpfx Adoya Ep Njdotb weight of the machine ca. 7,0 t dimensions of the machine ca. 3,0 x 1,2 x 3,2 m

Condition: used, Year of construction: 1996, diameter / mm workpiece length / mm length / mm MITUTOYO SURFTEST SV-500 Roughness tester with OLZE measuring plate Size: 600 x 600 x 80mm Target µm: 16 Actual µm: 10,00 Own weight: 85kg Iodjtvm Smspfx Addetb Information on the scope of delivery The package contains only the ordered product. Additional decorative items or other items shown in the product images are not included in the delivery.

Condition: used, Year of construction: 1988, weight of the machine ca. 5 t working width max. 300 mm 6 extensive accessories viele Wechselräder +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Itsdpfjvrk Ecjx Addsb Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: used, Year of construction: 1997, Technical details: max. wheel diameter: 5 - 350 mm max. module: 20 weight of the machine ca.: 0,8 t min. module: 0,5 dist. between centers: 5 - 750 mm table diameter: 260 mm z-axis: 600 mm Itedsx Uzvvepfx Addsb y-axis: 185 mm max. helix angle: 45 °

Condition: excellent (used), KARG KARG Industrietechnik MeltFlow on – MFI/MVR Melt Flow Index Tester For sale is a MeltFlow on melt flow index tester (MFI/MVR) from KARG Industrietechnik, Made in Germany. The unit was used in plastics quality assurance and is in very good, well-maintained condition. Ideal for laboratories, quality assurance, development, and production in plastics processing. Technical data: Manufacturer: KARG Industrietechnik Iedpfsx Trg Njx Addstb Model: MeltFlow on Code: 3200.000 Rated power: 1.6 kW Rated current: 7 A Voltage: 230 V / 50 Hz CE marking: yes Features & scope of delivery: - MeltFlow on tester - Set of weights: - 5.000 kg - 2.160 kg - 1.200 g - 5.000 g - Piston / plunger - Cleaning tool - Software CD: K-BASE software program V4.1 SP0 Important note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (see picture) (Specifications and details are subject to changes and errors!) For further questions, please feel free to contact us by phone.

Condition: excellent (used), Year of construction: 2023, Zwick / Roell Zwick/Roell HIT5P Pendulum Impact Tester Charpy Testing System – 5 Joules – Year of manufacture: 2023 Manufacturer: ZwickRoell Model: HIT5P Type: Pendulum Impact Tester / Charpy Testing Machine Year: 2023 Iodpfox Tp R Sex Addstb Condition: Very good / little used (see photos) Description: For sale is a high-quality Zwick/Roell HIT5P pendulum impact tester, suitable for conducting Charpy impact tests in accordance with ISO 179. This system is designed for material testing with a maximum impact energy of 5 Joules and meets the high quality and precision standards of ZwickRoell. The unit was manufactured in 2023, is in excellent technical and visual condition, and is delivered including the documented components. Technical Data – Pendulum Impact Tester HIT5P: Max. nominal working capacity: 5 Joules Pendulum length: 250 mm Drop angle: 135.72° Impact velocity: 2.9 m/s Drop height: 428.98 mm Dimensions (W × D × H): approx. 680 × 429 × 684 mm Weight: approx. 70 kg (without tools), approx. 75 kg (with standard tools) Ambient temperature: +10 ... +35 °C Electrical connection: 100–240 V, single phase Max. power consumption: 150 W Mains frequency: 50/60 Hz Interfaces / Electronics: Data acquisition: 500 Hz Ethernet port Protection rating: IP32 Safety and Additional Equipment: Fixed safety screens left and right Permissible impact energy of the protective device: max. 5 J Charpy Anvil Stand Max. nominal working capacity: 5 J Max. specimen dimensions: 15 × 15 mm Dimensions: approx. 135 × 128 × 112 mm Weight: approx. 5 kg Supports (ISO 179-1) Material: Steel Sample height: 4 mm Scope of delivery: 2 pieces Charpy Pendulum 4.0 J Potential energy: 4.0 J Drop angle: 135.7° Drop height: 429 mm Weight: approx. 1.12 kg Software & Documentation - testXpert® III software (original data carrier included) - Complete technical manual / original operating instructions - ZwickRoell documentation and data carriers (see photos) Important notice: "The table shown in the photos is not part of the sale." Condition: used Scope of delivery: (see pictures) (Specifications and technical data subject to change and error!) We are happy to answer further questions by phone.

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, Technical details max. wheel diameter 2-45 mm gear width 250 mm max. module 1,5 mm min. module 0,5 mm Control Fanuc 18i-MB weight of the machine ca. 2,2 t dimensions of the machine ca. 2100 x 1440 x 1700 m Additional information The combined CNC gear hobbing and worm milling machine KOEPFER MZ 120 is characterized by its flexible usability and is used in the small module area. Just by swiveling the milling spindle from the horizontal to the vertical position and selecting the corresponding operating mode of the CNC control, the worm milling machine becomes a gear hobbing machine and vice versa. CNC control Fanuc 18i-MB (Dialog/ISO) CNC axes = X-axis plunge axis Z-axis longitudinal axis C-axis workpiece spindle B-axis tool spindle V-axis loader axis longitudinal A-axis swivel axis tool spindle head (included as an option) Y-axis shift axis (included as an option) With the following production programs: Worm milling Hobbing Worm hobbing Bevel gear and spur gear milling Bevel gear hobbing Milling cycles = straight, oblique, crowned toothing, radial, radial-axial, co- and counter-rotating milling, roughing, finishing, worm gears, straight-toothed bevel gears, face gearing (option only in the partial process) Worms [Equipment] Coolant tank 300 liters KF with LNS Turbo MS 250 Chip conveyor, built in 2021!!! Kraft and Bauer fire extinguishing system Spiral conveyor Machine documentation [Technical data] Workpieces: Workpiece diameter 2-45 mm Iodjx Ux Suepfx Addjtb Max. workpiece length 250 mm Tooth length 150 mm Max. module in steel= 1 mm (gear hobbing) 1.5 mm (worm milling) 0.5 mm (bevel gear hobbing) Tools: Cutter diameter= 16-32 mm (gear hobbing) 40-63 mm (worm milling) Machine: Max. setting angle of milling head= +/- 45° (gear hobbing) +/- 30° (worm milling) Shift travel= 34 mm (manual adjustment) 34 mm (CNC axis) Collet/retraction mandrel W 20 Max. speed of workpiece spindle 770 rpm. Milling spindle drive 0.55 kW Max. milling spindle speed 8000 rpm Axis drives = X-axis (plunging) / travel 80 mm via CNC Z-axis (longitudinal feed) / travel 190 mm via CNC C-axis (workpiece axis) via CNC Rapid traverse = X-axis 6000 mm/min. Z-axis 6000 mm/min. Hydraulic unit 0.37 kW

Condition: excellent (used), Impact hardness tester Type according to Professor Baumann Type: No.523 Operating instructions available Box has the dimensions : L.380 x W.220 x H. 95 mm Itedpfx Adjd R Rhwedob Weight 5.5, kg

Condition: used, 2 x DETROIT DIESEL – Diesel engine Name: 12V-71TI Marine Gear Model: 7122-7302 Engine numbers: 12VA81375 ZF gear type: IRM350PL.1 ZF gear numbers: 20008107 ----- Name: 12V-71TI Marine Gear Model: 7122-7302 Engine numbers: 12VA81377 ZF type: IRM350PL.1 ZF numbers: 20007942 ----- Engine power: 613.7 kW (835 HP) at 2300 rpm Year of manufacture: 1975 Description: Turbocharged-Intercooled Number of cylinders: 12 Bore and stroke: 4.25 in x 5 in (108 mm x 127 mm) Displacement: 852 cu in (13.97 liter) Compression ratio: 17 to 1 Net weight: 5200 lbs (2359 kg) ----- Westerbeke / Mecc Alte generator Westerbeke engine Model: 16.0 / 20.0 BEDA Spec: 50 / 60 HZ 3PH Serial No.: U20246-D904 Generator Brand: Mecc Alte Spa Type: W31-140/4 Kva: 20 Rpm: 1800 Phase: 1 Volt: 120 / 240 Amp: 166.6 / 83.3 Kg: 135 Date: 2000 Itedpsxnbkqsfx Addob Hours: 366 Price on request Delivery terms: Delivery time: ex stock, subject to prior sale Delivery: ex Baarle-Nassau Payment: prior to collection Prices: net, excl. VAT. Machinehandel De Leeuw bv Oordeelsestraat 7-B 5111 PA Baarle-Nassau The Netherlands VAT / GST number: NL800103026B01 Chamber of Commerce Tilburg 18034279

Condition: good (used), Geared motor, electric motor, electric geared motor, spur geared motor Ijdpfx Aox Tdy Ujddstb -Manufacturer: SEW-Eurodrive, spur gear motor -Type: DF 132-G90 S/6 -Speed: 22 rpm -Power: 1 kW -Shaft: Ø 40 x 80 mm -Protection rating: IP54 -Dimensions: 575/250/H240 mm -Weight: 42 kg

Condition: used, Year of construction: 1987, max. wheel diameter 150 mm Ijdpfx Aex U A Umjddetb max. module 5 min. module 0,5 weight of the machine ca. 10.000 kg dimensions of the machine ca. 6500 × 2700× 3600 m

Condition: used, Year of construction: 1986, max. wheel diameter 150 mm max. module 5 min. module 0,5 Ijdpeucgw Rofx Addetb weight of the machine ca. 10.000 t dimensions of the machine ca. 6500 × 2700× 3600 m

Condition: used, Year of construction: 1988, max. wheel diameter 150 mm gear width . mm Isdpfswhq Eaox Addstb max. module 5 min. module 0,5 Control . total power requirement . kW weight of the machine ca. 10.000 t dimensions of the machine ca. 6500 × 2700× 3600 m

Condition: used, Year of construction: 1998, max. wheel diameter . mm gear width . mm max. module . Itsdpfx Aoucgwweddsb min. module .

Condition: used, Year of construction: 2001, Control SIEMENS Isdpfxoudc S Tj Addetb table surface area 160 mm weight of the machine ca. 10 t

Condition: used, Year of construction: 1990, total length: 5,900 mm, total height: 2,000 mm, total width: 1,300 mm, Empty weight: 7.500 kg Price: On request Center-height: 250mm Table-length: 2300mm Travel grinding-spindel: 200mm Gear diameter: 300 mm Module range: 0.5 mm – 8 mm Helix angle: ±35° Max. workpiece weight: 100 kg - Year: 1990 - Documentation available: No - CE certificate present: No - Serial number: 018.0402 - Control type: Optronic CNC D140 Itjdpjxz Du Sofx Addsb - Control: CNC - Transport dimensions: 5900mm x 1300mm x 2000mm (l x w x h) - Transport weight [kg]: 7500kg - Transport packages [pcs.]: 5 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: ready for operation (used), Eagle Gear Box Reduction : i = 1 : 85 Dimensions : 1100 mm x 800 mm x 400 mm Itodpoi A Ap Ajfx Addeb Ext. Axle : diam. 50 mm, with Pulley SPC 400-3 Int. Axle : diam. 100 mm, with socket