Used Glue Equipment for sale (41,397)

Condition: used, Year of construction: 2011, _____Gmeiner Airport Winter Maintenance Spreader, Icebear 2D. Capacity: 5000 liters of salt, 3000 liters of brine. Spreading width: 24 meters. Mounting engine. Mounted on a hooklift system. Location: 54595 Prüm. Isdpozdmtcjfx Ag Ueth

Condition: used, Year of construction: 2021, number of beds: 2, _____Basic equipment:Base frame for mounting on carrier vehicle with technical compartment for protected storage of components- 60001 GRP safety tank with baffle walls- 6-cylinder piston diaphragm pump with hydraulic drive from vehicle min. 40 l/min incl. 21/2" suction fitting with external suction via Storz C-coupling and pressure switch fitting- Spray bar with 1" stainless steel nozzle line mounted at the rear, incl. tip protection in front of spray bar- Manually operated triple nozzle holder for turning with 3-fold nozzle set for different application rates- Limit switch for safe filling- 2" external filling connection with Storz C-coupling and pressure switch fitting Manually operated triple nozzle holder for turning with triple nozzle set for different application rates- Limit switch for safe filling- 2" external filling connection with Storz C-coupling- Low-level drain tap with Storz C-coupling- Mechanical fill level indicator- Electro-pneumatic pressure filter flushing- Plug-on RKL at the rear- Position lights on spray bar left and right: front white, rear red- The nozzle carrier can be switched on and off pneumatically to prevent dripping- The application rate is controlled and monitored fully automatically via a Spray-Dos computerMore equipment:- Draw hook: base frame as draw hook design- Spray bar can be folded up- Spray bar 2.50 m- Pump capacity 320 l/min 2 1/2" suction filter Iedpfxeuw Dnxo Ag Usth

Condition: new, Year of construction: 2015, _____Hydraulic kit 3-point hitch 1 milling screw Discharge rotor Adjustable flap, mechanical Ijdpfozdmr Eex Ag Ujth Working width: 1570 mm Mounting options: Front or rear Location: Aschberger Christian

Condition: like new (used), Year of construction: 2017, functionality: fully functional, total length: 1,120 mm, total height: 1,490 mm, total width: 660 mm, type of input current: AC, product height (max.): 120 mm, product height (min.): 1 mm, product length (min.): 50 mm, product length (max.): 430 mm, product width (max.): 290 mm, product width (min.): 50 mm, input voltage: 230 V, input current: 13 A, overall weight: 100 kg, power: 3 kW (4.08 HP), film width: 400 mm, input frequency: 50 Hz, nominal power: 3 kW (4.08 HP), table width: 320 mm, table length: 460 mm, Equipment: documentation/manual, 2017 Robert Seal Corp SC346 Heat Shrink Wrapping Machine – UNUSED – As New Used 2017 Robert Seal Corp SC346 heat shrink wrapping machine for sale. Never used from new, single phase, compact shrink wrapper, excellent condition. Machine Manufacturer: Robert Seal Corp. Model: SC346 Machine Type: Heat Shrink Wrapping Machine Year: 2017 Condition: Never used from new. High-Quality Heat Shrink Packaging Machine for Sale in Ireland Used Machine Tools Ireland is pleased to offer this 2017 Robert Seal Corp SC346 Heat Shrink Wrapping Machine, supplied new and never used from new. The machine is in very good / as-new condition, making it an excellent opportunity to acquire a modern shrink wrapping system at a fraction of new cost. Designed for efficient, professional heat-shrink packaging, this compact and reliable machine is ideal for manufacturing, food, print, distribution, e-commerce, and general packaging applications. Key Features & Benefits Robert Seal Corp SC346 Heat Shrink Wrapper Manufactured 2017 Never used – unused stock Compact footprint Simple, reliable operation Single-phase power – easy installation Ideal for small to medium production runs CE marked Technical Specifications – Robert Seal Corp SC346 General Machine type: Heat Shrink Wrapping Machine Model: SC346 Year of manufacture: 2017 Condition: Very good – never used Supplier: Robert Seal Corp CE compliant Power & Electrical Power supply: 230V – 1 Phase Frequency: 50 Hz Installed power: 3.0 kW Current: 13.6 A Dimensions & Weight Overall machine dimensions: Length: 1120 mm Width: 660 mm Height: 550 mm Machine weight (without stand): 69 kg Itedpfx Agjydqm Ie Ueh Working table height (on stand): 940 mm Sealing & Packaging Capacity Sealing area: 320 × 460 mm Minimum package size (A × B × C): 50 × 50 × 1 mm Maximum package size (A × B × C): 430 × 290 × 120 mm Note: B + C must not exceed 350 mm Film type: Centre-fold shrink film Maximum film thickness: 60 gauge Typical film dimensions (D-F-E): 400 × 250 × 75 mm Operating Characteristics Acoustic noise level: 71.8 dB Compact, energy-efficient heat tunnel Suitable for continuous or intermittent operation Ideal Applications Product shrink wrapping Food & beverage packaging Printed materials & cartons E-commerce fulfilment Contract packing operations General manufacturing & distribution Why Buy From Used Machine Tools Ireland? Trusted Irish supplier of quality used & unused machinery Machines honestly described and inspected Nationwide & export delivery available Competitive pricing Notes: *Specifications are given in good faith but not guaranteed*

Condition: new, Year of construction: 2024, Osama Automatic 4-Roller Glue Application Machine Model: S4R/P-1400 Automatic gluing machine with 2 motors Working width: 1,400 mm Max. pass-through height: 0 - 100 mm Speed: 22 m/min Ijdpfx Aeu I R Uteg Uoth Working height: 900 mm Diameter of application rollers: 250 mm Motor power: 3 kW Electrical: 400 V / 50 Hz / 3 phase Automatic gluing machine with 4 rollers for polyvinyl acetate (PVAC), urea-formaldehyde (UF), and polyurethane adhesives, suitable for various materials such as MDF, multi-layer boards, particle boards, composites, and gypsum plasterboard. This type of gluing machine allows for precise and homogeneous dosing of adhesive, taking into account the corrugation of the rollers, which must be suitable for the respective production requirements. The heavy-duty structure and the roller cores, manufactured with greater thickness compared to earlier models, enable a high production rate without issues and bonding of materials up to 2200 mm in width. Roller removal for maintenance is straightforward, as the supports can be split in two via a simple bayonet coupling. The gluing machine can also be equipped with different accessories, such as an electronic speed controller, automatic roller washing device, and an automatic upper roller lifting mechanism with position display on the control panel. The S4R/P gluing machine is used in various production sectors, including construction and the manufacturing of foam panels and mattresses. Equipment: - Automatic roller cleaning - Infeed roller - Outfeed roller - Working height: 900 mm - Infeed table TRF 1400x3000 mm with PVC rollers, 60 mm diameter, 200 mm spacing - Outfeed table TDF 1400x3000 mm with disc rollers, D: 122 mm, stainless steel Location: in stock at 54634 Bitburg - Available immediately -

Condition: as good as new (ex-display), Year of construction: 2026, - NEW - Manufacturer: Ganner Gannomat Model: SELEKTA 253 220 V, 1 Ph, 50 Hz Complete in standard configuration with: - Fully automatic electronic control with program selector switch for RINSING – GLUING – GLUING/DRIVING-IN - Dowel feed via electronic vibratory feeder with potentiometer for stepless adjustment of dowel feed rate Ijdpfx Agodwi Rko Ueth - Automatic dowel diameter and length detection with Auto-DL-Select system (automatic ejection of dowels with incorrect lengths +/- 5 mm into collection container) - Closed glue system with 6 bar glue pressure via glue nozzle for adhesives with viscosity from 150 to 350 mPas - Stepless electronic adjustment of glue quantity with potentiometer by electronic time preselection - Selector switch for GLUE/WATER to rinse/clean the glue system, with EasyClean function button (automatic cleaning program for glue hose and glue nozzle via spray funnel and wastewater collection container) - Indicator lamp for glue level display in the glue container - 1 stainless steel container for 5 kg glue and 1 stainless steel container for 5 l water (for rinsing/cleaning) - 4 rollers for easy movement of the machine Including 1 gun for dowels Ø 8 mm, dowel length 25 – 40 mm, drive-in projection 7 – 20 mm Air connection: 6 bar Price ex stock 54634 Bitburg - Immediately available -

Condition: used, Unused and never installed Steriline sterile vial filling line made in 2021 with an output capacity of 24,000 pieces/hour. Sale includes ancillary equipment as described in equipment list below. The line was designed to operate in ORABS (Open Restricted Access Barrier System) containment system and currently capable of filling into vial sizes 6R (5ml) and 2R (2ml) with lyo / injection stoppers or alu caps. (OEM can provide change parts for alternative sized vials and cap formats.) Major equipment includes: - Rotary washing machine RC-V8 - Depyrogenating tunnel ST9-CCS - Tray Loader / TL2 - (4) LAF (Laminar Air Flow) Units - Vial filling machine VFM400 + oRABS - Swing way belt SWB1 + oRABS - Positive diverting system PDS + oRABS - Vial capping machine VCM400 + oRABS - Swing way belt SWB2 - Connection belt LBT - Swing way belt SWB3 - Rotating table RT Ancillary equipment includes: - (2) Fedegari FOF4/9 autoclaves - Veolia Waters Orion 6000 E WPU production unit - Steris Finn Aqua Pure steam generator - Steris Finn Aqua multiple effect water still - Atlas Copco ZT37VSD WP air compressor - WFI 15,000 litre storage tank - WPU 6000 litre storage tank - Main control cabinet - (2) Certuss steam generators - (2) Permak economiser and pump - Distribution system instruments (WPU, WFI, distribution system instruments, pipes, valves, pumps, etc.) - Clean room panels and ceilings Itjdpfoyhc Sqjx Ag Ueh - Daikin chiller Full design specifications available.

Condition: used, Year of construction: 2017, working width: 76,500 mm, color: other, total height: 1,800 mm, total length: 10,500 mm, total width: 8,000 mm, Serial number: Trailed double rake Working width: 7650mm Side deposit, left Three-point supported Itedpfxezbi Rte Ag Ush Drive: 540T/Min. Cardan shaft available Number of hydraulic connections: 1DW and 1EW Forced steered Tire size: 15.0/55-17, BKT Swath deposit hydraulically adjustable Removable arms Number of arms: 13 Road lights available Remarks: traces of use Overall dimensions: 10500x8000x1800mm Online auction of construction, agricultural and industrial machinery (including. KLEEMANN mobile impact crushers, JOHN DEERE / DEUTZ-FAHR / CASE / NEW HOLLAND tractors, VOLVO / CATERPILLAR / HITACHI / KOMATSU excavators, MANITOU / GEHL / GIANT / KUBOTA wheel loaders and skid steer loaders, JLG and TEUPEN aerial platforms, DAF / VOLVO hook-arm trucks, ATLAS COPCO and CHICAGO PNEUMATIC mobile compressors, CATERPILLAR / CUMMINS / FG WILSON power generators, BOMAG / HAMM rollers, SINOBOOM scissor elevator, various agricultural machinery and yard and workshop equipment, etc.), with most of the lots located in our own depot in Deinze, Belgium. The online auction opens Monday 1 June and closes Tuesday 23 June. Register your account via our website and place your bid. For viewings and inspections check the auction information on the website. Viewing day is on: - Monday 22 June Pickup days are on: - Tuesday 30 June - Tuesday 30 June Dome Auctions is an innovative auction platform dedicated exclusively to the industrial sector. By focusing on machinery sales from business closures, restructurings, and bankruptcies, we provide a trusted marketplace where buyers and sellers connect with confidence. Unlike general auction houses, Dome Auctions specializes in selling complete industrial assets directly from factories, ensuring quality and reliability. With a commitment to transparency, industry expertise, and tailored service, we streamline the sales process and maximize value for all parties. As online auctions continue to grow in the European industrial market, Dome Auctions offers a professional and efficient solution for companies seeking high-quality machinery at competitive prices.

Condition: excellent (used), functionality: fully functional, KALLFASS Foil packaging machine with shrink tunnel Plant consists of: 1) Kallfass Universa 8060/200 foil wrapping & sealing 2) Compact 650SO shrink tunnel 3) Outfeed conveyor system - extra 4) Storage device for wrapped packages - extra The goods to be packaged are film-wrapped and sealed inside the Inversa and then shrink-wrapped in the Compact-tunnel. Via a conveyor system Itjdpfx Ajwcnqcsg Ujh the wrapped packages are transported to a parcel storage station. Further technical info => check photos Please phone or mail

Condition: reconditioned (used), Year of construction: 1999, Palletiser consisting of - Knorr packing line - Knorr automatic jogger with air removing roller Itedpfx Agshfhtkj Ujh - Bizerba ITS industrial sheet counting scale Knorr system for unloading and palletising counted sheet. Paper is counted by Bizerba paper scale, then straightened and smoothened by jogger with air removing roller. Paper is picked-up positively with a pincer gripper system, transported and positioned accurately onto pallet, then left standing. Equipment may also be used as a performance-enhancing alternative to a paper lift for offloading your large sized guillotine.

Condition: used, mileage: 543,681 km, power: 90 kW (122.37 HP), first registration: 06/1997, fuel type: diesel, overall weight: 7,490 kg, next inspection (TÜV): 10/2021, color: orange, gearing type: mechanical, number of seats: 2, total width: 2,370 mm, total height: 3,260 mm, Equipment: parking heater, * Rear view camera * Rotating beacon * 5-speed manual transmission * Leaf suspension ----* Honda R.V. generator with 7,534 operating hours * Office with PC & control units * Schäfer Kommunaltechnik Drain Jet 100, year 1997 * 2 jetting heads * Jetting pump & hoses Iedsvhv Ibepfx Ag Usth ----* Tire size: 225/75R17.5 * Overall length: 7,000 mm ----- Subject to errors and prior sale, vehicle number 5711 WhatsApp support available! If you have questions about the vehicle or need more information, feel free to message us via WhatsApp Whatsapp Whatsapp

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, total length: 24,000 mm, total height: 4,200 mm, type of input current: AC, warranty duration: 12 months, workpiece weight (max.): 9,500 kg, power: 48 kW (65.26 HP), input voltage: 380 V, temperature: 20 °C, input frequency: 50 Hz, heating capacity: 6 kW (8.16 HP), inner dimension length: 24,000 mm, inner dimension width: 4,200 mm, workpiece height (max.): 1,500 mm, workpiece length (max.): 3,000 mm, waste water connection: 100 mm, feed length Y-axis: 16,000 mm, energy consumption: 42 kWh, insulation material: Steinwolle, insulation thickness: 50 mm, nominal power: 48 kW (65.26 HP), output voltage: 380 V, sheet thickness steel (max.): 3 mm, type of output current: AC, tank capacity: 4,000 l, number of previous owners: 1, number of chambers: 4, Equipment: lighting, This is a pre-treatment system in which metal parts are automatically cleaned using a spray process. Itjdpfx Agszd Sm Io Uoh

Condition: new, For sale is a comprehensive package of subsea hydraulic components from manufacturer FES International (UK). ⸻ 📦 Included in the package: • 7x 8” Subsea Hydraulically Actuated Male Hot Stab • 2x API 17D Dual Port Hot Stab • 1x 1” Subsea Hot Stab • Original shipping crates ⸻ 📌 Condition: • Unused / stock item • Preserved and securely packed for transport • Note on packaging: Seals to be replaced ⸻ 📌 Technical details: • API 17D standard • Suitable for subsea / offshore / oil & gas applications • Compatible with ROV systems and hydraulic couplings ⸻ 📌 Fields of application: • Offshore service & maintenance • Subsea hydraulic systems • Spare parts for existing installations Itedjy Dixdepfx Ag Uoh

Condition: good (used), quantity 1 STK. Hahn & Kolb SUBITO SU Internal Precision Gauge SU100-160mm 7 inserts 4 discs Without dial gauge In a wooden case. For the precise measurement of bores using the 2-point measuring method. By rotating and/or moving the gauge within the bore, geometric deviations can be detected. The movable measuring pin is fitted with carbide, as is the fixed measuring pin. Self-centring in the bore Iodpfxjzb Rape Ag Ueth kzeuge GmbH.

Condition: reconditioned (used), Year of construction: 2023, functionality: fully functional, total width: 1,400 mm, total length: 2,500 mm, total height: 1,800 mm, inside diameter of label roll: 76 mm, overall weight: 280 kg, Used machine in good condition, manufactured in 2023. Details: Labeling system for round and rectangular canisters Stainless steel frame 170 mm wide modular belt (optionally wider) Label width 190 mm Label length 300 mm, optionally longer Labeling speed up to 30 m/min Product diameter, after technical inspection, from 20 mm – 170 mm; further sizes optionally available Touch screen display, with memory function Label dispenser with three-dimensional adjustment options Isbn E Evou Ia E Is Sreau Product singulation with double-sided belts Product alignment for rectangular bottles Upper belt guidance for rectangular and oval products Additional labeling options, such as top labeling, seal labeling, bottom labeling, etc. Itodpozd Sn Eefx Ag Ush

Condition: used, Year of construction: 2018, machine/vehicle number: 1800603, total length: 2,485 mm, total height: 1,715 mm, total width: 1,245 mm, product height (max.): 240 mm, product length (max.): 600 mm, product width (max.): 400 mm, input voltage: 230 V, input current: 13 A, working height: 870 mm, width of welding knife: 600 mm, length of welding knife: 400 mm, passage height: 240 mm, overall weight: 763 kg, passage width: 400 mm, power: 3 kW (4.08 HP), film width: 700 mm, input frequency: 50 Hz, nominal power: 3 kW (4.08 HP), year of last overhaul: 2025, Equipment: documentation/manual, Minipack-Torre Pratika 56 MPE — Fully Automatic L-Bar Sealer. Year of manufacture: 2018, Serial No.: 1800603. Direct from end user, no dealer involved. Fully automatic L-bar sealer for shrink and film packaging. Schneider Electric Magelis touchscreen with 256 programmable recipes (settings for format, temperature, and speed per program). KEY SPECIFICATIONS Iodpfx Agjy Stuxs Ujth - Output: up to 3,600 units/hour - Usable sealing bar area: 600 × 400 mm, packaging height 0–240 mm - Film: polyolefin/PVC/OPP 7–80 µm; film roll up to Ø 300 × 700 mm - 230 V single phase, 3 kW — no three-phase power, no compressed air required - Dimensions (L × W × H): 2,485 × 1,245 × 1,715 mm, weight 763 kg - Schneider brushless servo drive, PLC logic, emergency stop, safety exclusion key switch CONDITION Very good visual condition, maintained by an authorized service partner — full service history documented. Lifespan counter: 36,415 packs — moderate usage. In May 2025: sealing wire, upper and lower rubber strips, and Teflon tape will be renewed. KNOWN REPAIR REQUIREMENTS (transparent) One conveyor belt (infeed/outfeed belt, part no. 400201) is worn. Authorized service partner quote available: material €357.59 + labor €522 = €879.59 net. Replacement is also possible to perform yourself. PDF of repair quote available on request. SCOPE OF DELIVERY Machine fully operational (glass hood, Magelis touchscreen, all safety features), connection cable, roll of film (remaining stock), mobile on four swivel castors. Original documents (data sheet, order confirmation, maintenance correspondence available on request). LOCATION & HANDOVER 18239 Satow (Mecklenburg-Vorpommern). Self-collection is preferred — free inspection with functional test possible by appointment. Transport can be organized for an additional fee (special pallet + crating required due to 763 kg weight). TERMS - Asking price: €14,500 net (plus VAT) - Commercial sale: Marko Strehk Sole Proprietorship - Sale “as is”, with all liability for material defects excluded in accordance with §§ 437 ff. BGB; disclosed defects transparently listed above - Buyer has the option for pre-inspection and functional testing — complaints after handover are excluded - For intra-community delivery to buyers with VAT ID: tax-exempt delivery possible If interested, please inquire with a brief description of intended use — response within 24 hours.

Condition: excellent (used), total width: 3,000 mm, color: green, Year of construction: 2023, Colour: Green Extendable Braked Units: 1x Goldhofer THP / ADD 2.0 6 / 12×08 S 1x Goldhofer PPU / ADD – 530 / 3000 1x Goldhofer THP SL 6 SPLIT Iodev I A Syopfx Ag Ueth 1x Goldhofer THP SL 2 01x Goldhofer THP / ADD 2.0 6 – 12 x 08 s Year of Manufacture / 2023 VIN / WG0THPA68N0062326 Only a few test kilometres! (approx. 7 km) Axle load capacity / 36 t. per axle row Steering angle / 55° in each suspension level BPW axles Michelin tires / 215 / 75 R 17,5 EBS brake system Hydro-mechanical steering Central lubrication 01x Goldhofer THP SL 2 axle unit Year of Manufacture / 2023 VIN / WG0THPS26N0042340 Only a few test kilometres! Axle load capacity / 45 t. per axle row Steering angle / 55° BPW axles Michelin tires Hydro-mechanical steering Central lubrication 01x Goldhofer THP SL 6 Split Year of Manufacture / 2023 VIN / WG0THPS64N0042341 Only a few test kilometres! Axle load capacity / 45 t. per axle row Steering angle / 55° BPW axles Michelin tires / 215 / 75 R 17,5 EBS brake system Hydro-mechanical steering Central lubrication 01x Goldhofer PowerPack Unit / ADD – 530 / 3000 Year of Manufacture / 2023 VIN / 62327-00 Deutz 6-cylinder diesel engine 390 kW / 530 HP Operating hours / Only 32 hours! Emission level / EU Stage 5 Wireless remote control operated = Further information = Year of Manufacture: 2023 Technical condition: very good Optical condition: very good Price: On request

Condition: used, functionality: fully functional, first registration: 10/2018, Year of construction: 2018, URN28 V-shaped snowplow URN28 Bucher/Gmeiner Equipment No.: UR0007781R with rubber scraper blade and additional steel scraper blade Standard features: - Lightweight V-shaped plow, blade made of polyethylene - HD lifting and lowering mechanism - HD pivoting mechanism using two hydraulic cylinders - Hydraulic hoses complete with hydraulic couplings - Pivoting damping valve Itjdpszfbvhsfx Ag Ush - Rubber scraper blade, URC version - Rubber scraper blade and additionally hydraulically adjustable steel scraper blades (URN version) - Plow boundary lights, LED - Support struts - Mounting plate (plow side) Without control panel, no control panel selectable Mounting hook, size 3 Boundary flags and warning markings Drive via vehicle hydraulics, 4-circuit Paint color RAL 2011, municipal orange Subject to changes, typographical errors, errors and prior sale. All information is provided without guarantee. The sale is made excluding any warranty or guarantee.

Condition: used, Year of construction: 2024, _____TK-III 340, three-point attachmentBasic equipment: Frame with 3 ploughshares Hydraulic swivel device left-right Hydraulic installation with quick hydraulic couplings in accordance with DN10-ISO 7241-1A Curbstone deflector left-right Three-point attachment plate CAT 2N, 2 and 3N in two mounting heights Pressure relief valve Cylinder in strong design, double-acting Pendulum compensation up to 14° Additional springs for lateral inclination in the pendulum system Adjustable skids Warning flags with holder Parking foot Distance block for stop angle 36° Municipal paint RAL 2011 Steel scraper barEquipment subject to additional charge:Wind deflectorAlso possible with DIN attachment!Price from 13,408.00 (net)The image serves as an example, can contain special equipment.,Storage location:null Iodou Ebktepfx Ag Ujth

Condition: used, Year of construction: 2024, _____WTS-1200 Wet Salt Equipment Standard Equipment: Stainless steel folding cover, spreading container with brackets and drive, grating, removable parking stand, mounting bracket for category 2 and 3, fully hydraulic drive of the feed auger and spreading disc shaft, specially coated spreading container, stainless steel sliding plate, stainless steel spreading disc, stainless steel spreading disc device, equipment safety cover, protective cover for the hydraulic valves and electrical distribution, hydraulic block with anti-reverse protection, pressure oil filter, electronic spread pattern adjustment, LED lighting, color RAL 2011, Win-Icom road-dependent control system, stainless steel agitator shaft. Additional Equipment (for an extra charge): Work lights, wet salt system, 500L front tank made of plastic, rubber apron, winter service marking. Price from €23,450 (net). The photo is an example and may include special equipment. Storage location: null Ijdpfx Agou Ebk He Ujth

Condition: used, Year of construction: 2024, _____Basic equipment: Frame with ploughshare Hydraulic swivel device left-right Hydraulic installation with quick hydraulic couplings in accordance with DN10-ISO7241-1A Curbstone deflector left-right Three-point attachment plate CAT 2N, 2 and 3N in two mounting heights / for MG-150 to -210 CAT 1N, 1 and 2N OR municipal attachment plate F1, F2 in accordance with EN15432-1:2011 (formerly DIN 76 060, size 3) with lifting system for tension-free lifting and lowering Pressure relief valve Cylinder in strong design, double-acting Pendulum compensation up to 18° Adjustable skids Attachment device screwed Warning flags with holder Parking foot Municipal paint RAL 2011Special equipment:Equipment subject to surcharge:Euro mountWheelsLED lightingPU scraper barsAlso available as a three-point attachment!Price from 7,013.00 (net)The picture serves as an example, can contain special equipment.,Storage location:null Iedeu Ebkmopfx Ag Uoth

Condition: used, Year of construction: 2024, _____Vario XM 300 DIN basic equipment: two shares mounted on the frame with king pins, collision protection via deflection flaps, guided via parallel link, collision-proof central pin (tip), hydraulic swivel device left-right, hydraulic installation with 6 (or 4 for the three-point) quick hydraulic couplings in accordance with DN10-ISO 7241-1A and 1 pressureless return connection, curb deflector left-right, municipal attachment plate in accordance with EN15432-1:2011 F1, F1/C or F2 (formerly DIN 76 060, size 3 or size 5) with lifting system for tension-free lifting and lowering, lifting system with upper torsion spring fork for optimal road adaptation (vertical and horizontal parallel guidance), pressure relief valve, cylinder in strong design, double-acting, pendulum compensation up to 14°, additional springs for lateral inclination with the pendulum system, adjustable skids, warning flags with holder, adjustable LED lighting Distance block for stop angle 45° Parking foot Municipal paint RAL 2011 Damping rail PU Steel scraper barEquipment subject to additional charge:Switchover valveRubber deflectorAlso available with three-point attachment!From 16,145.00 _ (net)The picture is an example and can contain special equipment.,Storage location:null Iodpfeu Ebkysx Ag Ueth

Condition: like new (used), Year of construction: 2008, operating hours: 12 h, functionality: fully functional, warranty duration: 12 months, Cold Jet Aero 75 DX Machine – Like New This machine is suitable for industrial cleaning, including intensive and large-scale projects. The main advantage of this unit is its minimal reliance on new-generation electronics. It is one of the most powerful machines available on the market and is in excellent condition. Cold Jet Aero 75 DX Dry Ice Blasting Machine, Complete with the Following Equipment: - COLD JET AERO 75 DX DRY ICE (only 12 operating hours) - 1 x 20’ Blasting Hose - 1 x Cold Jet Applicator - 2 x Nozzles (NEW) One of the best machines worldwide. No electronics inside, making it highly reliable and affordable to maintain. For inquiries or to arrange a viewing, please contact us at DrDryice. Ijdpfx Agewg R Edj Ujth All machines sold include a 1-year warranty. We offer repairs and maintenance for Cold Jet machines. New Cold Jet machines are also available through us. Contact us for more details. Worldwide Shipping Available. Keywords: Cold Jet dry ice machine for sale, dry ice blasting machine for sale, industrial dry ice blaster for sale, CO2 cleaning machine for sale, Cold Jet Aero 30 for sale, Cold Jet Aero 40FP for sale, Cold Jet Aero 40HP for sale, Cold Jet Aero 75 for sale, Cold Jet Aero 75 DX for sale, used Cold Jet machine, second-hand dry ice blasting machine, Cold Jet Aero series, Cold Jet i3 MicroClean, Cold Jet E-CO2, Cold Jet SDI Select 60, Cold Jet IceRocket, Cold Jet Elite 20, Cold Jet Dry Icepress, Cold Jet pelletizer, dry ice blaster, dry ice cleaning machine, industrial dry ice cleaning system, pellet dry ice blaster, dry ice blasting equipment, cryogenic cleaning machine, CO2 blasting machine, carbon dioxide blaster, industrial cleaning, machine cleaning, maintenance cleaning, production line cleaning, mold cleaning without disassembly, paint removal dry ice, coating removal dry ice, rust removal, fire and soot damage cleaning, electrical cabinet cleaning, food industry cleaning, automotive cleaning, printing press cleaning, dry ice blaster 20 bar, high pressure dry ice blaster, non-abrasive cleaning machine, refurbished dry ice machine, 20 ft blasting hose, dry ice blasting gun, venturi nozzle, Kärcher Ice Blaster, Kärcher IB 7/40, Kärcher IB 15/120, ASCO Jet, Cryoblaster, ICS Dry Ice, Nozzitec, Triventek, Cryonomic, Südstrahl, White Lion dry ice blaster, ICEsonic dry ice blaster, dry ice blasting machine Netherlands, dry ice machine Noordwijkerhout, industrial cleaning equipment Europe, export dry ice machine, DrDryice.

Condition: ready for operation (used), Year of construction: 2021, Nordson Hot Melt Glue Pump Type: MESA 6 Year 2021 Ijdpfx Aey R Ecrog Usth Power 200/240 V 50/60 Hz, 15/18 A Dimensions: 750 mm x 350 mm x 570 mm.

Condition: used, Year of construction: 2010, Used machine Year of manufacture: 2010 Features and technical data: Right-hand version 2 auxiliary tables are still in original packaging H&H / HARDO TH 1020-V46 BV DA (twin system) Maximum application width: 2,040 mm (2 × 1,020 mm) Design: Twin system, both machines can also be operated individually Application roller: reinforced version Application roller diameter: 46 mm Application roller knurling: 0.5 mm Bearings: reinforced roller bearings Bearing shells: hardened Scraper: pneumatically actuated, needle bearings Main bearing lubrication: routed externally, to be filled with a manual grease gun Container seal: adjustable and replaceable without removing the application unit Application speed control: via frequency converter Speed range: 3.2 – 19.3 m/min Control: potentiometer Display: digital speed display Pressure rollers: 2 pieces, silicone-coated Pressure roller length: 2,040 mm Pressure roller diameter: 159 mm Pressure roller actuation: pneumatic Automatic lowering of pressure rollers when drive motor is switched off Height adjustment for material clearance: electromechanically, manual inching mode Applicator unit stroke: 0 – 200 mm Conveying height: 925 mm (underside of material) Pressure roller drive: separate drive Motor: including motor mounting, fastening, and enclosure Additional application speed control: via separate frequency converter Additional speed range: 3.2 – 19.3 m/min Additional control: potentiometer Additional display: digital speed display Base frame: aluminium profile system Stands: 2 pieces, anodised aluminium plates Adjustable feet: adjustment range ±25 mm Material feed direction: right to left Heating control: programmable timer (daily and weekly program) Temperature control: electronic with digital actual value display Itsdpsy E Avljfx Ag Ueh Melt tank capacity: 2 × 25 litres Heating power: 2 × 8.0 kW Nominal power: 18.5 kW Control voltage: 24 V Nominal frequency: 50 Hz Operating voltage: 400 V Phases: 3 Fuse: 63 A Compressed air connection: < 8 bar Application: Melting and applying non-reactive hot-melt adhesives Weight: 1,560 kg Availability: short-term Location: Rhineland-Palatinate