GLUE TANK VT100

IMA

Condition: used, Year of construction: 1998, Used machine Year of manufacture: 1998 Features and technical data: At 5,500 mm in length, the Quadromat is the shortest edge banding machine that enables complete processing of edge materials with an integrated workpiece return system. Not only are the longitudinal edges trimmed within the machine, but the end edges are also copied, thus completing the processing cycle. The finished workpiece is returned to the operator, eliminating the need for manual reworking. - With PLC control system supporting up to 20 processing programs Workpiece dimensions: - Minimum width: 60-80 mm (depending on edge material) - Minimum length: 150 mm Hodpfowkba Tex Acrol - Workpiece thickness: 10 - 50 mm - Edging thickness: 0.4 - 12 mm - Minimum edging length: 400 mm Feed rate: 18 m/min Equipped with: - 2 jointing milling motors - Multi-functional milling unit (flush trimming, chamfer, radius) - Scraper - Cross-cut saw - 2 glue pots (for transparent and white glue) and 1 spare pot Compressed air connection: 7-10 bar Extraction connection: 160 mm Weight: approx. 2,400 kg Availability: short notice Location: Flörsheim

Condition: used, Year of construction: 1994, Storage location: Nattheim Hsdowmm Nrspfx Acrel

Condition: good (used), IMA LED set-up aid used in working condition. about 60 LEDs 15 pin serial port on both sides Dimensions 18 x 56.7 x 312 mm including 10 mm for the connectors Direct purchase in our internet shop on our homepage Hodpfxebxx Ius Acrsl

Year of construction: 2001, condition: good (used), IMA glue part Spare part for e.g. IMA 680 / 480 /980 Edge banding unit for 4-sided gluing and all-round gluing on butt joints with: -Main pressure roller diameter 100 mm and pneum. controlled squeezing roller, diameter 35 mm -Specification of adhesive for the coating of the Edge material, with temperature control and level control -Servo drive for edge transport with auto- automatic adjustment to the web speed -Hot air re-activation unit 7.5 KW, on the adhesive side -IR radiator 600 watts on the decor side the deformation of the material at small radii -pneumatically driven cutting saw -Bumping edge query -NC axis Rotation range up to 740 degrees, pneum. Z stroke 125 mm -separate NC-axis in Y (with portal in X) working independently of the main axis Year of construction of the part 2001 comes from machine IMA 680 V No. 2216 Scope of delivery as shown Hsdpfx Aobxx Ikecrsl Please check the possibility of installation in your machine. No return possible Unit was used in production for about 2 years and can be described as good Technical information subject to change

Year of construction: 1991, operating hours: 13 h, condition: like new (used), functionality: fully functional, Corazza/IMA MD120 portion packer. Hedpfxswfn Ade Acrol Machine for dosing and wrapping mini portions of butter and bouillon cubes in rectangular packs. - Capacity 5400 p/hr up to 7200 p/hr - Current pack size 31x23x11 --> Conversion to other pack size possible - Yom. 1991. - Factory overhaul by IMA 2016. Only 13 running hours since the overhaul. - Paper feed and positioning controlled by photocell - Butter fed by stainless steel funnel with stainless steel auger. - Fully guarded with Lexan doors and windows. (Acc EC regulations.) - Including documentation and EC conformity declaration. - A fully automatic collecting and stacking device in multiple layer configuration can be added. - This machine is basically the similar to the Benhil 8304 As new condition Please contact us for more information, the machine can be seen by appointment.

Condition: used, machine/vehicle number: 005637, Type of edging: Thin edge, Thick edge Hsdpfx Acsvw Ev Horel Gluing System: EVA Hotmelt Combination Squaring Edgebanding Machine: First Pass Max Panel Width: 1300 mm Max feed speed: 50 m/min Operating Units Right Side: 11 nr Operating Units Left Side: 12 nr

Condition: used, machine/vehicle number: 006017, Position 1: Vertical Storage Systems IMA-COMBIMA SYSTEMS/N/I/R75/1110 Position 2: Angular Beam Panel Saws IMA-COMBIMA SYSTEMS/N/I/R75/1110 Position 3: Panel Feeding and Loading IMA-COMBIMA SYSTEMS/N/I/R75/1110 Position 4: Roller Conveyors IMA-COMBIMA SYSTEMS/N/I/R75/1110 Position 5: edge bander batch 1 IMA-COMBIMA SYSTEMS/N/I/R75/1110 Position 6: Roller Conveyors IMA-COMBIMA SYSTEMS/N/I/R75/1110 Position 7: edge bander batch 1 IMA-COMBIMA SYSTEMS/N/I/R75/1110 Hjdjwukzhjpfx Acrsl Position 8: Roller Conveyors IMA-COMBIMA SYSTEMS/N/I/R75/1110 Position 9: edge bander batch 1 IMA-COMBIMA SYSTEMS/N/I/R75/1110 Position 10: Roller Conveyors IMA-COMBIMA SYSTEMS/N/I/R75/1110 Position 11: edge bander batch 1 IMA-COMBIMA SYSTEMS/N/I/R75/1110 Position 12: Roller Conveyors IMA-COMBIMA SYSTEMS/N/I/R75/1110

Condition: used, machine/vehicle number: 005635, Position 1: Panel Feeding and Loading IMA + MEINERT-COMBIMA/II/650/A/R3 Position 2: Double Sided Squaring/Edgebanding Machines IMA + MEINERT-COMBIMA/II/650/A/R3 Position 3: Panel Turning Device IMA + MEINERT-COMBIMA/II/650/A/R3 Position 4: Double Sided Squaring/Edgebanding Machines IMA + MEINERT-COMBIMA/II/650/A/R3 Position 5: Panel Turning Device IMA + MEINERT-COMBIMA/II/650/A/R3 Position 6: Panel Stacking and Offloading IMA + MEINERT-COMBIMA/II/650/A/R3 Hedpfxowuudyj Acrsl

Condition: used, machine/vehicle number: 005642, undefinedPosition 2: Double Sided Squaring/Edgebanding Machines IMA + MEINERT-COMBIMA/II/650/A/R3 Hjdewuciwopfx Acrsl undefinedPosition 4: Double Sided Squaring/Edgebanding Machines IMA + MEINERT-COMBIMA/II/650/A/R3

Condition: used, machine/vehicle number: 005639, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt Corner Rounding Unit: yes Combination Squaring Edgebanding Machine: First and Second Pass Max Panel Width: 3000 mm Max feed speed: 50 m/min Hjdjvw Evgspfx Acrel Operating Units Right Side: 12 nr Operating Units Left Side: 12 nr