Used Grading Sieve for sale (1,163)

Condition: excellent (used), diameter / mm Cutting (quantity) / weight / kg Electric Single-Line Pump MKF2-KW3-20003+428 – 230 V The MKF2-KW3-20003+428 is an electric single-line lubrication pump for fluid grease, designed for operation with 230 V at 50/60 Hz. It delivers 0.2 l/min at a maximum operating pressure of 30 bar. The pump is equipped with a 3-litre plastic reservoir, pressure switch, pressure gauge, and level switch. The outlet connection is G 1/4" thread. Protection class is IP 54. The permitted ambient temperature range is +10 °C to +40 °C. The pump operates in intermittent mode with a duty cycle of 20 % (operating mode S3). Credpsyk Im Ssfx Ab Djg Compatible lubricant: fluid grease, NLGI grade 000 or 00.

Condition: used, Year of construction: 2020, mileage: 1,294 km, power: 55 kW (74.78 HP), first registration: 10/2022, overall weight: 3,500 kg, fuel type: diesel, color: orange, gearing type: automatic, total length: 4,157 mm, total width: 1,350 mm, total height: 2,160 mm, number of seats: 1, Equipment: air conditioning, all wheel drive, In accordance with our "General Terms and Conditions," without any guarantee or warranty, we can offer you the following vehicle on a non-binding basis, subject to final sale, errors, typographical errors, and prior sale: Aebi Schmidt Flexigo 150 municipal vehicle with sweeping attachment including container + water, winter service equipment with spreader attachment and snowplow blade (Vehicle 444) First registration: 14.10.2022 1,294.7 operating hours Engine: 2,216 cc 55 kW / 75 hp Length: 4,157 mm x Width: 1,300 mm x Height: 2,160 mm Permissible total weight: 3,500 kg Unladen weight: 2,150 kg Payload: 1,350 kg TÜV (technical inspection): 10/2027 Tires: 255/65R16, front approximately 50% tread, rear approximately 40% tread Air conditioning Flexigo 150 chassis Perkins 404J-E22TA engine, 4 cylinders, 55 kW / 75 hp, 4 cylinders, diesel Permanent hydrostatic all-wheel drive Comfort cab with middle seat including heating, ventilation, and air conditioning Operating armrest with joystick and 4.3" graphics display Water tanks: 200 L including filling connection Storz C-coupling, suction pipe Backrest tilt adjustment, lumbar support, seat heating, armrest, seat occupancy sensor Adjustable headrests, automatic seat adjustment to the driver's body weight ISRI comfort driver's seat, air-suspended Radio with Bluetooth and hands-free system, USB connection, MP3 player Integrated rear-view camera including 7-inch color display Rear monitoring with infrared night vision camera + TFT monitor in cab Additional suction shaft camera with infrared night vision and LED work light Transport speed: 40 km/h Hydraulic pressure regulation for front lift Lubrication strip block Adapter mounting triangle, Category 0 Water system HD/system, return water hose, detachable, with coupling, for better flushing Tires as all-season tires 255/65R16 with alpine symbol including fender extensions Sweeper attachment Multigo Series 74-1-062, production 2020 Sweeping material container 1.5 m3 and circulating water system, container made of high-quality, rust-free aluminum High-dump emptying 1,600 mm, 200 L circulating water Suitable for sweepers and grass collection Multi-purpose separation sieve for efficient dirt and grass separation Deflector plate with rubber coating (wear protection) Hydraulic quick-change coupling (faster coupling), single-lever operation Stand for removing the sweeping attachment container (tipping trailer) Rear impact protection with 55 mm spacing LED work lights at the rear of the sweeping material container, shovel and broom holder Crjdpfjzx Ikrjx Ab Dog Sweeping unit: 2-brush system (drawn) including suction shaft Sweeping width: 1,190 - 2,400 mm, brush diameter: 900 mm Suction shaft with interchangeable function (attachment and removal) Hydraulic coarse dirt flap on the suction shaft Stepless brush speed adjustment 0-150 rpm Dust reduction by 2 water spray nozzles per disc brush Automatic impact protection, hydraulic tilt adjustment for brushes on the right Body spreader Schmidt Stratos S06-15L, Series S2S34787, production 2020 Spreader superstructure Stratos S 06-(12) with 0.6 m3 container Screw conveyor Protective grille 40x40 mm Folding roof stainless steel Drive via vehicle hydraulics Multi-fast coupling set Control system Evolution Classic EC Spreader plate "350", 2-6 meters Spreading control via LED lamp (red or white) Intermediate frame for Multigo 1.4T Stainless steel front cover Multigo 4 support legs, 1.4 tons load-bearing capacity, crank drive in the center R

Condition: good (used), Year of construction: 2018, Recycling technology, agglomerator, high-performance mechanical dryer, dry cleaner, plastic recycling machine, drying system -Handover: in its current condition as inspected -Condition/Scope of delivery: untested, as shown in the pictures Crsdsztndujpfx Ab Dog -Manufacturer: WIPA, Dry Cleaner Mechanical High-Performance Dryer -Type: MD 1250-3000/90/0.75/3R -Drive motor: 90 kW -Drum length: 1800 mm -Sieve: Perforation Ø 5 mm -Dimensions: Dryer 4475/2140/H2630 mm / Control cabinet 1200/660/H2195 mm -Weight: 8400 kg / 340 kg

Condition: used, Aluminum silo with long support skirt Technical specifications / Dimensions Available units: 1 Volume: approx. 105,000 liters Type of vessel: Silo Condition: Used Food-grade: No Design: Upright Internal diameter: approx. 3,000 mm Cylindrical height: approx. 17,525 mm Total height: approx. 18,020 mm Weight: approx. 2,500 kg Specific gravity of medium: 0.6 t/m³ Operating pressure: Non-pressurized Material / Construction Inner shell material: Aluminum Equipment Support design: Base ring/support skirt Mounting: Fixed Top head type: Conical roof Slope: approx. 15 degrees Bottom head type: Cone Cone angle: 60 degrees Top section: 2 x crane lugs 1 x manhole DN 500 with cover 1 x roof edge railing 1 x flange DN 100 (SiloPilot) 1 x rectangular flange (approx. 1,215 x 835 mm) for filter Crsdpfx Abjtxitce Djg Shell: 2 x flange DN 32 (min-max indicator) 1 x filling line, leading into the top of the silo and ending at the TW connection at the bottom 1 x access door with ventilation slots (approx. 850 x 2,500 mm) 1 x cable protection conduit Remarks: - The silo ends at the bottom in a 60° cone with flange and extraction box. - The silo has cosmetic defects (brown discoloration, various drilled holes for cable ducts in the support skirt), which do not affect the functionality of the silo. The currently connected measurement and control equipment is included. However, no warranty is given for its functionality!

Year of construction: 2014, condition: excellent (used), functionality: fully functional, Aluminum storage silo with a long base ring, ø 3,000 Technical data / Dimensions Available quantity: 2 Volume: approx. 35,000 liters Container type: Silo Condition: used Csdpfx Aozy D Iijb Dorg Food-grade: no Design: vertical Internal diameter: approx. 3,000 mm External diameter: approx. 3,060 mm Cylindrical height: approx. 7,525 mm Overall height: approx. 8,785 mm Weight: approx. 1,800 kg Specific gravity of the medium: 0.60 t/m³ Operating pressure: Non-pressurized Wall thickness, bottom: approx. 4.0 mm Wall thickness, top: approx. 5.0 mm Wall thickness, shell/cylinder: approx. 4 mm Operating temperature: 50°C Material / Properties Material, inner shell: Aluminum Material designation: AlMg3 Equipment Base design: Foot ring / base ring Bottom type, top: Conical bottom Bottom type, bottom: Cone Cone angle: 60 degrees Top: 1 x Roof edge railing (height: approx. 1,200 mm) 1 x Self-closing door 2 x Crane eyes 1 x Manhole DN 600 with cover, ventilation slots and fall protection 1 x Flange DN 100 (level measurement) 1 x Flange DN 100 (filling) 1 x Threaded socket 1 1/2" (low-level indicator) 1 x Flange DN 250 Shell: 1 x Access door (approx. 1,400 x 850 mm) 1 x Filling line DN 100, terminating in a Storz coupling at the bottom 4 x Pipe supports for filling line 1 x Cable protection tube DN 50 1 x Threaded socket 1 1/2" for low-level indicator Bottom: 1 x Outlet DN 200 1 x Suction fitting The silo has a 60° cone. Notes: One of the silos has a single-rung access ladder with back protection (additional cost: €1,250) The currently connected or existing measuring and control technology will be included free of charge. However, no guarantee is given for its proper functioning. Documentation Drawing Container statics

Year of construction: 2020, condition: used, functionality: fully functional, machine/vehicle number: 376295, The Reitz KXE 250-050030-00 is an industrial centrifugal fan designed to generate a high total pressure increase in process installations. The assembly consists of a volute fan casing, an impeller mounted on a separately supported shaft, a coupled electric motor, and a common steel base frame with vibration-isolating mounts. The KXE design is suitable for moving air and process gases in systems requiring high flow rates and pressure. This unit was manufactured in 2020 for a rated volume flow of 500 m³/min and a total pressure increase of 2500 daPa. At its operating point, it delivers 602.4 m³/min at 1862 daPa and 3033 rpm. The shaft is supported by two 6318 bearings lubricated with Shell Gadus S2 V100 2 grease. Manufacturer: Konrad Reitz Ventilatoren GmbH & Co. KG Type: KXE 250-050030-00 Product type: industrial centrifugal fan Serial number: 376295 Crodszw Ug Repfx Ab Dsg Year of manufacture: 2020 Material number: 10466442 Measurement category: C Efficiency grade: N61 Target efficiency grade value: 64.5 Rated inlet temperature: 20°C Operating-point inlet temperature: 40°C Rated inlet medium density: 1.205 kg/m³ Operating-point inlet medium density: 0.93 kg/m³ Rated volume flow: 500 m³/min Operating-point volume flow: 602.4 m³/min Rated total pressure increase: 2500 daPa Operating-point total pressure increase: 1862 daPa Optimum efficiency: 76.3% Rated shaft power: 256.57 kW Operating-point shaft power: 231.1 kW Rated rotational speed: 2980 rpm Operating-point rotational speed: 3033 rpm Maximum rotational speed: 3159 rpm Maximum medium temperature: 80°C Drive-end bearing: 6318 Non-drive-end bearing: 6318 Lubricant: Shell Gadus S2 V100 2 Initial relubrication interval: 2460 operating hours Subsequent relubrication interval: every 2460 operating hours Grease quantity per bearing: 132 g Conformity marking: CE

Year of construction: 2020, condition: used, functionality: fully functional, machine/vehicle number: 376292, The Reitz KXE 250-050030-00 is an industrial centrifugal fan designed to generate a high total pressure increase in process installations. The assembly consists of a volute fan casing, an impeller mounted on a separately supported shaft, a coupled electric motor, and a common steel base frame with vibration-isolating mounts. The KXE design is suitable for moving air and process gases in systems requiring high flow rates and pressure. This unit was manufactured in 2020 for a rated volume flow of 500 m³/min and a total pressure increase of 2500 daPa. At its operating point, it delivers 602.4 m³/min at 1862 daPa and 3033 rpm. The shaft is supported by two 6318 bearings lubricated with Shell Gadus S2 V100 2 grease. Manufacturer: Konrad Reitz Ventilatoren GmbH & Co. KG Type: KXE 250-050030-00 Product type: industrial centrifugal fan Serial number: 376292 Year of manufacture: 2020 Material number: 10466442 Measurement category: C Efficiency grade: N61 Target efficiency grade value: 64.5 Rated inlet temperature: 20°C Operating-point inlet temperature: 40°C Rated inlet medium density: 1.205 kg/m³ Operating-point inlet medium density: 0.93 kg/m³ Rated volume flow: 500 m³/min Operating-point volume flow: 602.4 m³/min Rated total-pressure increase: 2500 daPa Operating-point total-pressure increase: 1862 daPa Optimum efficiency: 76.3% Crsdpfxszw Ucxo Ab Djg Rated shaft power: 256.57 kW Operating-point shaft power: 231.1 kW Rated rotational speed: 2980 rpm Operating-point rotational speed: 3033 rpm Maximum rotational speed: 3159 rpm Maximum medium temperature: 80°C Drive-end bearing: 6318 Non-drive-end bearing: 6318 Lubricant: Shell Gadus S2 V100 2 Initial relubrication interval: 2460 operating hours Subsequent relubrication interval: every 2460 operating hours Grease quantity per bearing: 132 g Conformity marking: CE

Condition: excellent (used), Year of construction: 2023, operating hours: 2,000 h, functionality: fully functional, Equipment: compressor, documentation/manual, Available immediately due to change in business direction. A complete, fully operational beverage production system currently used for the commercial manufacture of premium kombucha. The plant is equally suitable for the production of soft drinks, functional beverages, botanical drinks, syrups, flavoured waters, iced teas and other non-carbonated beverages. Manufactured from food-grade 304 stainless steel and certified to UKCA, CE and TÜV SÜD standards. Located in Ireland. Plant Specification • 4 × 4,000L Jacketed Fermentation/Process Vessels • 2 × 2,000L Mixing/Kettle Vessels with Whirlpool Mixing • 4,000L Cold Water Tank • 4,000L Glycol Tank • Plate Heat Exchanger • Siemens PLC Control System • Complete Glycol Chilling System • Pumps and Pipework throughout • Stainless Steel Process Pipework • 2 × 200L CIP Units • Fully integrated valves and sanitary fittings • Temperature controlled throughout production. Metered Pump Capabilities Suitable for production of: • Kombucha • Functional beverages • Soft drinks • Flavoured waters • Botanical drinks • Tea beverages • Juice blends • Syrups • Beverage concentrates • RTD drinks The integrated whirlpool system allows efficient ingredient incorporation and mixing. Condition • Fully operational • Currently in production • Well maintained • Excellent condition • Available for inspection under power Credpfszp Hkxex Ab Dog Certification • CE Certified • UKCA Certified • TÜV SÜD Certified • Food Grade 304 Stainless Steel Location Ireland Can assist with dismantling and loading. Price POA / Offers Invited Alternatively willing to discuss sale of complete turnkey beverage manufacturing facility. Photos and videos available upon request.

Condition: used, Year of construction: 2017, machine/vehicle number: 472447, LEIBINGER TRANSVASA 12/6 EK – monobloc counter-pressure bottle emptying / transfer machine for carbonated beverages in glass bottles IDENTIFICATION - Manufacturer: LEIBINGER - Model: TRANSVASA 12/6 EK - Year of manufacture: 2017 - Serial/order number: 472447 - Previous application: cider FUNCTION AND OUTPUT - 12 emptying valves - Counter-pressure emptying with long-tube technology - 6 decapping stations - Direction of operation: clockwise - Nominal output: 2,500 bottles/h for 0.75 l bottles - Adjustable range: 560–2,800 bottles/h - Designed for carbonated beverages, e.g. traditionally produced cider - Automatic removal and collection of pierced bottle closures - Integrated through conveyor PRODUCT AND UTILITY DATA - Maximum product temperature: 20 °C - Compressed air: 6 bar; connection R 1/2" - CO₂ product pressure: 8 bar; gas connection R 1/2" - Product outlet: DN 40 - Gas discharge: DN 40 - Buffer tank: 100 l nominal volume according to the order confirmation; 108 l according to the rating plate - Product pump: stainless-steel rotary lobe pump, material 316L - Conveyor height: 1,000 mm ± 50 mm ELECTRICAL DATA - Operating voltage: 400 V - Control voltage: 24 V DC - Frequency: 50 Hz - Main drive: max. 0.75 kW MATERIALS AND DESIGN - Product-contact parts mainly made of stainless steel 316Ti and 316L - Main pipework made of stainless steel 316L - Emptying tubes made of stainless steel 304 - Food-grade plastics, e.g. POM and PTFE - Food-grade elastomers, e.g. EPDM - Hygienic tubular frame design without horizontal collection surfaces - Frameless Makrolon safety guarding with interlocked doors and removable covers - CIP connections - Mechanical lifting pistons press the bottles against the emptying valves - Bottle-presence monitoring at the infeed and jam monitoring at the discharge - Central safety clutch - Height-adjustable machine feet Crodpszxuz Rofx Ab Dog - CE-compliant design at the time of delivery ACCESSORIES AND DOCUMENTED BOTTLE FORMATS - SOWEC SO filter, year 2017 - Order confirmation: guide parts for one bottle format included - Lightweight 75 cl cider bottle: height 290 ± 1.8 mm, body diameter 82.8 ± 1.5 mm, 29 mm crown finish, approximate brimful capacity 78.5 cl, approximate glass weight 540 g - Méthode Traditionnelle 75 cl bottle, model 1164/320: height 300 ± 1.8 mm, body diameter 85.9 ± 1.5 mm, 29 mm crown finish, filling capacity 750 ± 10 cm³ at 72 mm, approximate glass weight 775 g, maximum carbonation 5.0 volumes CO₂ The original order confirmation, operating manual and bottle data sheets are available. The completeness and condition of the format parts and accessories currently present must be verified before use.

Condition: used, Year of construction: 2018, machine/vehicle number: 10619-1, MEYPACK VP 451 tray and wrap-around packaging machine Fully automatic machine for packing beverage cans into trays and wrap-around cartons. Products and formats: - 0.33-litre cans, Ø 66 x 115 mm, loose and in four-packs - 0.5-litre cans, Ø 66 x 168 mm, loose and in four-packs Pack configurations for both can formats: - 4 x 6 loose cans in a wrap-around carton or tray - 3 x 4 loose cans in a wrap-around carton - 2 x 3 four-packs in a tray Output: - Nominal output: 16,000 cans/h - Packaging output: 12 or 24 packs/min, including a 5% capacity reserve Product handling: - Multi-lane bulk product infeed - Four-packs fed transversely on two lanes, with the openings facing sideways - Infeed height: approx. 1,150 mm ± 50 mm - Outfeed height: approx. 650 mm ± 50 mm - Trays and wrap-around cartons leave the machine broad side leading Operating principle: The products are fed continuously in multiple rows, distributed evenly into the lanes of the infeed conveyor using the accumulation principle, and grouped into the required formation. At the same time, a flat tray or wrap-around blank is removed from the magazine and positioned below the grouping station. The servo-driven lowering station receives the product formation and blank and folds the blank tightly around the products. A servo-driven indexing chain then conveys the pre-folded pack through the gluing and compression stations. The finished pack is transferred to the downstream conveyor system via a gravity roller conveyor. Grouped-pack size range: - Length: 200–400 mm - Width: 120–300 mm - Height: 80–200 mm - Tray height: 40–200 mm Packaging material and magazine: - Suitable for almost all commercially available corrugated-board grades; final design subject to approval by MEYPACK - Blank length: 360–1,250 mm - Blank width: 300–700 mm - Magazine capacity: approx. 150 blanks or approx. 400 mm stack height for B-flute board - Flat blanks are separated by vacuum cups and positioned by a belt conveyor - Hot-melt adhesive: commercially available grades approved by the adhesive-unit manufacturer; final design subject to approval by MEYPACK Utilities: - Electrical supply: 3 x 400 V AC, 50 Hz, with neutral and protective conductor; permissible long-term voltage fluctuation ± 5% - Control voltage: 24 V DC - Compressed air: 6 bar, 1/2-inch connection; clean and free from foreign matter, gases and oils Operation and format change: - The machine can be monitored by one operator while performing another task - Operator side can be arranged on the right or left when viewed in the outfeed direction - Fast, repeatable format changes through zero-line design and automatic indexing-chain adjustment - Settings documented in product-specific format lists; clearly assigned and marked change parts Basic machine and components: - Weight: approx. 3,500 kg - Finish: black grey RAL 7021 - Pneumatics: Festo - Hot-melt unit: Nordson Pro Blue - Drives: SEW, protection class IP55 - Control system: Siemens S7 - Operator interface: Siemens Touch Panel TP 1500 - Electrical design in accordance with MEYPACK standard electrical equipment specification E 2017 Included options: - Additional tray takeaway conveyor for manual palletising - Painted-steel roller conveyor with integrated corner transfer, nominal width 350 mm, length approx. 1,100 mm - Two-lane transfer unit with modular belt chain, adjustable side guides on one side and stainless-steel cable duct - Broadband VPN router for remote machine maintenance - Swivel arm for Credpfjzxuz Dsx Ab Dsg

Condition: excellent (used), Catalogue number 7975 TECHNICAL DATA - Infeed width: 450 mm - Infeed height: 250 mm - Shaft width: 530 mm - Knife length: 530 mm - Number of knives: 2 pcs - Sieve dimensions: 50x50 mm - 2 toothed feed rollers from below - Lower feed roller motor approx. 2.2 kW - Toothed feed roller from above - Upper feed roller motor approx. 2.2 kW - Conveyor belt - Conveyor belt length: 6500 mm - Conveyor belt width: 400 mm - Main motor 37 kW - Conveyor motor 0.37 kW - Autoreverse (adjustable) - Overall machine dimensions (L/W/H): 2400x1300x1100 mm - Conveyor overall dimensions (L/W/H): 6600x610x550 mm - Weight approx. 2500 kg – German manufacture – Autoreverse (adjustable) – protects the machine from blockage and damage in case of overload – With 6500 mm conveyor – Used shredder, in very good condition Net price: 115,900 PLN Net price: 27,600 EUR based on 4.2 EUR rate (Prices may change with significant currency fluctuations) Credpfxozr Iwfo Ab Dog

Condition: new, Catalogue No. S0336 TECHNICAL SPECIFICATIONS - Surface planer table length: 1800 mm - Working width: 410 mm - Working height: 225 mm - Spindle speed: 4500 RPM - Number of knives: 4 pcs - Spindle diameter: 100 mm - Motor power S1: 4/5.6 kW - Voltage: 400 V - Dimensions (L/W/H): 1900/800/1300 mm - Weight: 495 kg Four-knife cutterblock ensures precise machining, High-grade construction and finish, Foldable planer tables to the rear—do not limit thicknesser functionality, Table made of grey cast iron with ground surface, Adjustable thicknessing rollers for optimal workpiece feed, Sturdy tiltable fence adjustable from 90° to 45°, Precisely mounted reversing knife spindle, Thicknesser table with central column guidance and stabilizer, Space-saving side-mounted profile fence. Scope of delivery: – Knives (installed), – Heavy profile fence, – Two rollers in the lower thicknesser table Optional equipment: – Horizontal borer, – Spare knives 410 x 25 x 3.0 mm Csdpfszrk Rnsx Ab Djrg Net price: 15,700 PLN Net price: 3,710 EUR (based on exchange rate 4.2 EUR) (Prices may vary due to significant exchange rate fluctuations)

Condition: used, maximum load weight: 2,860 kg, overall weight: 3,500 kg, axle configuration: 2 axles, first registration: 12/2022, total width: 2,320 mm, Year of construction: 2022, The new ALGEMA FIT-ZEL® EURO-TRANS is the innovative trailer for professional car transport. Fitzel Algema Eder Euro-Trans 35-22/53X tarpaulin trailer, pendulum axle, 100 km/h approval, single owner, used twice, no signs of wear, as new condition. Gross weight 3,500 kg, Tare weight approx. 640 kg (including special equipment), payload 2,860 kg X-Line pendulum axles for 100 km/h approval Lift axle preparation Tyres: 195/50 R13C 104N M+S on alloy rims Loading dimensions: 5,300 x 2,180 mm, loading height 660 mm Overall dimensions: 6,620 x 2,220 mm, approach angle approx. 7.5° Standard equipment: • Pendulum axles with 100% load compensation • ALU loading platform, easily tiltable due to center-of-gravity shift with descent and tilt damper • 2 extractable and infinitely laterally adjustable ALU loading ramps, centrally lockable, operable from both sides, lockable • 2 rubber buffers per loading ramp for safe locking when retracted • Lashing straps, attachable on both sides at over 50 lashing points, for legally required load securing • 1 certified load securing according to TÜV certificate no. LS1206430Z1 • 1x 13-pin plug connection cable, 1 metre long, 12 volts • 8 large rear lights incl. 2 reverse lights and 2 rear fog lights • 2 rear outline marker lights, 4 orange side marker lights and 2 white front position lights - for your safety • 1 heavy-duty jockey wheel Ø 60 mm with safety chain • 1 maneuvering support wheel at the front allows for easy single-axle maneuvering with rubber-sprung axle • Reflective side stripes for your safety - F-band • 2 rear rolling supports • 2 driving tracks (550 mm wide, roughened) for safe, slip-free loading • 1 pre-tensioned platform • 1 automatic locking system • Bolted, anodized chassis • Shock absorbers required for 100 km/h approval Included special equipment: • Aluminum floor plate • High tarpaulin 5.30 x 2.30 x 2.00 m (internal loading dimensions LxWxH) - Complete aluminum frame with 2 support wheels, rollable as a unit - Front chamfered 600 x 600 mm - Incl. truck-grade tarpaulin, color black - Roll-up by hand on all 4 sides Csdpszxiy Usfx Ab Dorg - Auxiliary loading mirror fitted front left - Winch clamp holder at the front right of the tarpaulin frame (tarpaulin height customizable) • Tarpaulin color: RAL black • High rear tailgate for tarpaulin • Right-hand side flap • Sliding curtain left and right Empty weight incl. special equipment only approx. 640 kg = 2,860 kg payload! - New list price according to equipment: €31,050 net plus €190 COC paper/document - Despite our best efforts, errors within the advertisement cannot be excluded. Subject to errors and prior sale!

Year of construction: 1991, condition: excellent (used), functionality: fully functional, We are offering this very good Haver EML 200 analog unit, manufactured in 1991. It is a complete set, including the machine and (new) sieves. Amplitude range: 0–10 mm Interval range: 0–10 s Timer range: 0–60 min If you have any questions or would like more information, please feel free to send us a message or call us. Includes 2 sieve bottoms and 8 new Retsch sieves: 150, 200, 250, 280, 300, 315, 355, 500 microns Two additional sieves of 500 and 800 microns. Csdpfx Abozuvato Djrg Fixed price for the complete set: €1,250

Condition: new, Year of construction: 2022, Celsius Food food-grade baking oven Baking temperature range: 50 to 260 degrees Ref: ConduVec 12.10 E Cjdpfx Abjxu Rk Te Dsrg The oven has never been used and is still in its original packaging.

Condition: used, Year of construction: 2017, mileage: 10,236 km, power: 24 kW (32.63 HP), first registration: 12/2017, overall weight: 2,200 kg, fuel type: diesel, color: red, next inspection (TÜV): 09/2027, gearing type: automatic, number of seats: 1, Equipment: all wheel drive, In accordance with our "General Terms and Conditions," without any guarantee or warranty, we can offer you the following vehicle subject to final confirmation, errors, typos, and prior sale: Hako CityMaster 600 with a new engine, sweeping brush with water and dirt tank, new engine, front-mounted mower, hopper spreader, snowplow (Vehicle 267) First registration: 14.12.2017 10,236 km 1,915 total operating hours, but now with a new engine! 971 brush operating hours Engine new in 2025, currently approx. 170 operating hours Engine: 1,642 ccm 24 kW / 33 hp 25 km/h approved Permissible total weight: 2,200 kg Unladen weight: 1,380 - 1,465 kg Overall length: 3,160 - 3,260 mm x overall width: 1,085 - 1,200 mm x overall height: 1,9985 - 2,202 mm Road approval Articulated steering 2 adjustable brush systems Turbine + water pump on/off Adjustable water quantity 3 speeds for operation Radio/CD Rotating beacon on driver's side, rear 2 headlights on top + 2 in the middle Rearview camera with monitor, additional camera for monitoring the suction nozzle, automatic switching during reversing Radio with Bluetooth for mobile phone and MP3 Repeating lights on cabin roof Distance sensor 7-pole control cable Universal tires 23.00x8.50-12 Trelleborg T539, front approx. 80%, rear approx. 90% Grammer comfort driver's seat with air suspension Universal suction container 600 L, hydraulically tilting, payload 500 kg, emptying height 142 cm, emptying width 865 mm Handheld suction hose for leaves, accumulated dirt, etc., foldable on the passenger side in the middle Universal quick-change roll container Vacuum gauge on container, for monitoring the suction power and indicating decreasing suction power when the maximum container filling level is reached, as well as a clogging indicator Cjdszxkf Eopfx Ab Dsrg Sweeping unit: 2 brushes, hydraulically adjustable, sweeping width 110 to 180 cm, brush arms with 3-fold impact protection Disc brush made of plastic-steel Lightweight weed brush on the right Attachment: Suction nozzle, roll container sweeping unit Universal front-mounted mower 122 cm (hydraulically driven 3-blade special mower with rear discharge, working width 122 cm, integrated pendulum compensation, four-wheel drive with cutting height adjustment in 1 cm increments from 4 - 10 cm, transport safety device for road travel) Attachment: Suction nozzle mower Attachment: Suction system (transfer device for connecting the suction nozzle) Hopper spreader KIF SS200 (single-chamber spreader with fully hydraulic drive, auger discharge, mixing shaft, and foldable spreading disc, loading capacity 200 L, manual control for spreading quantity and width, working width 1.5 - 4.0 m spreading disc, protection, and discharge chute made of stainless steel) Filling sieve, foldable cover, additional protective cover for Citymaster 600. Quick-change base frame for Citymaster 6009, spreader RAL 2011 and 2-layer interior coating, container attachment 130 L, to increase the loading capacity to 330 L for light spreading materials such as salt and granules. Spreading control from the cabin, spreading quantity, spreading width with automatic start/stop function Snowplow 135 cm with breakaway function, rubber scraper blade Inspection + TÜV (technical inspection) valid until 09/2026 Price: €29,000.00 (net) All information is provided without any guarantee or warranty. Our "General Terms and Conditions" apply. Place of jurisdiction for both parties up to a dispute value of €10,000 is the district court of Ludwigsl

Condition: used, Year of construction: 1986, total length: 1,900 mm, total height: 2,420 mm, total width: 1,700 mm, Colour: Grey Empty weight: 2.000 kg - Year: 1986 - Documentation available: No - CE certificate present: No - Serial number: 70.144 - Main motor power [kW]: 45 - Rotation speed [rpm]: 1470 - Rotor width [mm]: 780 - Number of shafts [pcs.]: 1 Credpfx Asy Dthveb Dsg - Opening width [mm]: 440 - Opening length [mm]: 6500 - Sieve perforation [mm]: 7 - Number of fixed knives [pcs.]: 10 - Transport dimensions: 1900mm x 1700mm x 2420mm (l x w x h) - Transport weight [kg]: 2000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Year of construction: 2021, condition: good (used), functionality: fully functional, 1 complete granulation line, partially overhauled and expanded in 2025, consisting of: Conveyor trough with screw (level-controlled) for 100% ground material or additive, feed screw with mixing paddle and color dosing, frequency-controlled Buffer silo for film with agitator and frequency-controlled rotary valve, as well as an agitator in the stuffing unit with load monitoring and reverse operation (adjustable) RCP horizontal stuffing unit 15 A for film and ground material, frequency-controlled. Extruder 120 mm - 38 LD - vacuum degassing (water ring) Year of construction 1996 - screw new in 2026 / heaters new / cooling fan new 180 kW - DC (frequency inverter 180 kW as a spare) Laser sieve Kitech with 60 mesh, diameter 350 mm Control via control cabinet, year of construction 2025 Strand die with 26 holes, closable and adjustable for different materials using variable screw-in nozzles Strand cooling water tank with new stainless steel bearings in plastic rollers Strand blower Strand granulator SG 200 Kitech, with 5 kW drive - frequency-controlled Granulate classifying sieve and conveyor blower with pipelines BIG BAG filling station with closure for Big-Bag change Cjdpfx Abozb Dp Re Dorg Commissioning by our technicians, details and costs upon request. Inspection in Wuppertal, appointment available on short notice.

Year of construction: 2021, condition: good (used), 1 complete granulation line, cutting/compacting/extruder combination, tangential, since 2021 only operated in a single shift using production waste, including DPE ground material/aluminum (pipe material). System consisting of: Cedozb Dr Sepfx Ab Dsrg Hydraulic roller cutter, 140 cm width, for roller diameters up to 60 cm, 18.5 kW drive. Erema conveyor belt with metal detection bridge, 900 cm x 110 cm, with timer. Wagner WS30 shredder, 30 kW, rotor width 140 cm with hydraulic slide, rotor with 74 reversible cutting blades, discharge and inclined conveying screw. Roller feed for heavy rolls with cutting device in the longitudinal direction to relieve the mill, frequency inverter-controlled drive, 3.5 kW. Cutting mill with 11 kW, downstream for parallel operation with shredder/roller feed, suction/conveying fan to the buffer silo with agitator, frequency inverter-controlled for discharge rate/dust protection. Feed screw for ground material. Conveyor belt, L 9 m x W 80 cm, metal detection bridge, frequency inverter controlled via load detection from the cutting compactor. Conveying screw for 100% ground material, stainless steel, L 4.5 m and diameter 100 mm. Cutting compactor, 138 kW, frequency inverter controlled, suction fan, water spray cooling, tangential to extruder ES 180 mm 30 LD with 2-stage vacuum degassing, including: Laser filter LF with diameter 500 mm / 2-disc system, discharge screw for contaminants with timer, melt pressure sensor, spare screens: 60 mesh 2x, 70 mesh. Strand die, 26 holes - interchangeable dies, year of manufacture 2021, melt pressure sensor, complete overhaul/replacement of wear parts in January 2026. Strand cooling water tank, L 700 cm x W 70 cm, stainless steel. Strand rollers made of plastic with stainless steel ball bearings, height-adjustable, year of manufacture 2023. Strand granulator SG 200 E with 7.5 kW as well as 1 spare granulator 5.5 kW for quick replacement during overhaul or cleaning/maintenance work. Granulate classification sieve, stainless steel, including conveying fan and pipes. BIG BAG filling frame, 2-place, with ladder and platform. BIG BAG floor scale with receipt printer. Throughput material-dependent, up to 900 kg/h. Start-up, commissioning by our technicians, details and costs upon request - after consultation. Inspection in Wuppertal, appointment can be arranged shortly.

Condition: new, functionality: fully functional, Year of construction: 2026, laser power: 6,000 W, laser wavelength: 1,020 nm, sheet thickness (max.): 25 mm, sheet thickness steel (max.): 25 mm, sheet thickness stainless steel (max.): 15 mm, sheet thickness aluminum (max.): 10 mm, table length: 3,050 mm, table width: 1,525 mm, working length: 3,050 mm, working width: 1,525 mm, warranty duration: 24 months, Equipment: CE marking, centralized greasing system, documentation/manual, dust extraction, emergency stop, Compact, reliable and available directly from stock The SENFENG SF1530NP is a fully enclosed fiber laser cutting machine designed for manufacturers looking for a reliable, high-performance solution in a compact footprint. Built with a heavy-duty machine frame and premium industrial components, it is engineered for continuous production and long-term reliability. Available directly from stock from early September. Why choose Besten Machines? A fiber laser is a long-term investment. That's why we don't just supply a machine—we provide a complete solution including installation, training, service and maintenance. ✔ Over 25 years of experience in sheet metal processing ✔ Locations in the Netherlands and Germany ✔ Our own Dutch and German service engineers ✔ Installation, maintenance and technical support carried out by our own team ✔ Extensive spare parts inventory ✔ Live demonstrations and cutting tests in our showroom ✔ Personal support before and after your purchase ✔ More than 70 SENFENG machines successfully installed While many suppliers simply sell machines, we support our customers throughout the entire lifecycle of their investment—from initial consultation and installation to preventive maintenance and technical support. Codpfx Aozni R Ejb Dorg Premium Machine Configuration At Besten Machines, we deliberately supply the SF1530NP with a higher-specification configuration than the standard factory version. This results in improved reliability, better cutting performance and lower operating costs. Our configuration includes: Technical Specifications • Working area: 3000 × 1500 mm • Laser power: up to 6 kW • Fully enclosed Class 1 safety enclosure • BOCI BLT442 autofocus cutting head • FSCUT4000E control system • CypCut software • Heavy-duty welded machine bed • SMC proportional gas valves • Aerospace-grade aluminum gantry • BOCI servo drive system • Available with Max Photonics or IPG laser source • Local Service in the Netherlands & Germany • With locations in Haarle (The Netherlands) and Büren (Germany), Besten Machines operates its own sales, service and demonstration facilities in both countries. Our Dutch and German service engineers provide: • Installation and commissioning • Operator training • Preventive maintenance • Emergency breakdown support • Technical assistance • Spare parts support This ensures fast response times, direct communication and support from experienced engineers who understand both your machine and your production process. Available from Stock This SENFENG SF1530NP is available directly from stock from early September. Contact us today to schedule a live demonstration, request a test cut or receive a no-obligation quotation.

Year of construction: 2022, condition: like new (used), functionality: fully functional, A very rare opportunity to acquire a 3 year old 600 kgs per hour, complete hot wash recycling and cleaning line suitable for a range of rigid polymers to be size reduced and intensively cleaned. Machinery has very low hours of operation, and is only available as a result of re-organisation of the current operations. Materials are firstly delivered either by manual loading , or by an automatic pnematic box or cage lift/tilt system to a picking belt and metal detection tunnel. Materials then proceed via an inclined conveyor belt to a Hot washing granulator. Size reduced materials then drop onto a vibrating sieve ,to separate the majority of dirty water and any fines. Granulated materials transfer to an inclined Archimedes screw delivering materials to a horizontal high speed centrifugal cleaner. After this cleaning the materials enter a large diameter vertical drying centrifuge and all used water is then recirculated to heated tank to be reused. Finished materials then conveyed to a ZigZag air separator for final fines/dust removal before being blown to a cyclone over a double bagging tower. The fines separated at this stage are blown to a separate cyclone over a single bagging tower for fines and fibres etc removed by the ZigZag tower. Csdpfsxcnxdox Ab Dsrg The entire line can be seen in operation in the UK and by special arrangement could be trialed with potential buyers materials. Used water caould be recycled through the system, but this is dependent upon the type of contamination to be removed. The entire line is of European manufacture, and all materials exposed to water are manufactured in Stainless Steel. Decommissioning, Transport, Installation and commissioning together with operator training can also be offered internationally to a buyer of the equipment.

Condition: used, mileage: 60,300 km, power: 115 kW (156.36 HP), first registration: 07/2024, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, loading space volume: 12 m³, loading space length: 3,540 mm, loading space width: 1,800 mm, loading space height: 1,900 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), Transmission * Manual transmission, 6 gears Assistance Systems * Rear parking assist Lights and Visibility * Headlight range adjustment Credpfx Abezvt N Uo Deg * Tinted glass * Daytime running lights Audio & Communication * Radio * Digital radio reception DAB * AUX & USB connection * Hands-free system Bluetooth Exterior * Leaf spring suspension * Trailer hitch * Electrically adjustable and heated exterior mirrors * All-season tires * Rear doors with 270° opening angle * Connection plug 1x13-pole Safety * Driver airbag * Electronic Stability Program ESP * Anti-slip regulation ASR * Anti-lock braking system ABS * Outside temperature display * Immobilizer Interior * Seats, fabric * Digital tachograph * Multifunction steering wheel * On-board computer * Partition * Load compartment floor, wood * Load compartment wall paneling, high-grade plastic Comfort * Automatic climate control * Driver's seat, height-adjustable * Co-driver's bench seat * Power steering * Adjustable steering column * Power windows * Central locking with remote control * Cup holder Load Compartment * Length 3,540 mm, width 1,800 mm, height 1,900 mm * Volume 12 m³ Other Dimensions and Weights * Permissible total weight: 3,500 kg * Gross vehicle weight: 7,000 kg * Wheelbase: 3,520 mm Additional Equipment * Used car seal: CERTIFIED PRE-OWNED Standard * Former rental vehicle -----IVECO CERTIFIED PRE-OWNED STANDARD - Fluids topped up (except fuel) - Decals removed and basic cleaning - Normal signs of use / good condition - IVECO CERTIFIED PRE-OWNED PLUS (Additional cost net 2,000.00 + VAT) - New TÜV and emission test - New inspection - Decals removed and basic cleaning - Technical inspection + repair - IVECO CERTIFIED PRE-OWNED PREMIUM (Additional cost net 2,500.00 + VAT) - TÜV and emission test - New inspection - Optical preparation - Technical inspection + repair - Additional cost for reversing camera net 850.00 + VAT - For an additional cost / small or large Iveco warranty up to 36 months possible - Subject to prior sale - Your contacts: - Mr. Axel Scheske, Tel. - Mr. Luca Netter, Tel.

Condition: excellent (used), functionality: fully functional, Year of construction: 2000, Used impact mill for the production of crushed stone and graded aggregate, feed size 20-100 mm, capacity approx. 40 m³/h. Codpozwt Uaefx Ab Djrg

Condition: excellent (used), functionality: fully functional, Year of construction: 2008, actuation type: hydraulic, The Baileigh Industrial R-H85 is a heavy-duty, industrial-grade hydraulic double-pinch roll bender designed for precision metal fabrication. It is engineered to minimize material waste and deliver highly accurate, repeatable bends for high-capacity applications. Core Specifications & Capabilities Bending Capacity: Capable of handling up to 3″ Schedule 40 pipe and 3-3/8″ x 3-3/8″ x 1/4″ angle iron. Double-Pinch Design: Features a fixed top roll and two lower rolls driven by independent hydraulic cylinders. This setup allows for pre-bending and post-bending, minimizing the unbent straight sections at the edges of the material to reduce scrap metal waste. Credpfx Abszn Rdms Deg Driven Rolls: Equipped with an industrial-grade hydraulic transmission that powers all 3 rolls at a speed of 5.2 rpm. Versatile Operation: The machine can be adjusted to operate in either a vertical position for smaller diameters or a horizontal position when rolling larger radii. Key Features Precision Control: Includes a portable operator pedestal housing an integrated digital readout (DRO). Encoders communicate with the DRO for exact positioning of the lower rolls, and programmable stops ensure easy repeatability across large production runs. Anti-Twist Lateral Guides: Features hydraulically powered lateral angle guide rolls that keep structural shapes properly aligned and prevent twisting during the bending process. Segmented Tooling: Comes standard with hardened tool steel, segmented drive rolls that can be reconfigured to match various material sizes and shapes. Heavy-Duty Build: Constructed from heavy steel plate that is both bolted and welded to eliminate framework flex even when operating at maximum capacity.

Condition: good (used), Year of construction: 2000, For sale is a used carton sealing machine (tape sealer) from Cyklop. The machine is ideal for automatically sealing cartons with adhesive tape (top & bottom) and can be easily integrated into existing packaging lines. Typical applications: * Shipping / Logistics * Warehousing & Fulfillment * Production / Packaging lines ⸻ ⚙️ Technical Information * Suitable for tape width approx. 50 mm * Carton size adjustable (width & height) * Integrated conveyor belt * Robust industrial-grade construction * Suitable for continuous operation 👉 Comparable models operate at approx. 20–23 m/min conveyor speed in newer versions ⸻ Crodpfxjy Hf Sle Ab Deg 📦 Condition * Used, reflecting its age * Visual condition as shown in photos * Function: (insert here: running / untested / tested) ⸻ 📐 Advantages ✔ Fast and clean carton sealing ✔ Time savings compared to manual work ✔ Ideal for medium to high volumes ✔ Proven industrial quality by Cyklop