Used Grinding And Polishing Machine for sale (70,198)

Condition: used, Year of construction: 1990, working area D= 30 mm speed 20 m/min Bar length 3000- 6000 mm weight of the machine ca. 3 t Dkodpfxszl E Rcs Anzjr dimensions of the machine ca. 9 x 2 x 2,4 m Belt grinding line with 2 grinding units for pipes and bars. Surface of round material is grinded by through feeding.

Condition: good (used), Polishing bench, grinding machine, polishing bench, double grinding bench, double grinding machine, pedestal grinding machine, pedestal grinding bench Djdpfx Anjd D R Sxszokr -Drive: 2.2 kW -Speed: 1420 rpm -Assembled brush: 150 mm -Dimensions: 700/800/H1300 mm -Weight: 73 kg

Condition: used, Year of construction: 1995, functionality: fully functional, Drum Grinding and Polishing Unit Manufacturer: UHLIG, Type UB 22 Year: 1995 Technical Data: Make: Werner Uhlig Model: UB 22 Year of manufacture: 1995 Drive: Worm gear with motor Rotational speed: 5.6 – 54 l/min Shaft diameter: 25 mm, max. torque: 34 Nm Motor power: 0.25 kW Dimensions: approx. 1.00 x 0.90 x 1.20 m Weight: approx. kg (not specified) Equipment: - Control with frequency inverter - 2 single-chamber drums, approx. 200 mm wide, diameter 260 mm - Infinitely variable drum speed - Fresh water rubber hose - Waste water drain connection All details are subject to change without notice. A demonstration under power is possible at any time in our exhibition hall. Dkjdpfxjyw Rhmj Anzjr

Condition: as good as new (ex-display), Year of construction: 2021, operating hours: 5 h, machine/vehicle number: 6178, total width: 1,650 mm, total length: 600 mm, total height: 2,200 mm, overall weight: 295 kg, grinding wheel width: 75 mm, grinding wheel diameter: 300 mm, power: 4.4 kW (5.98 HP), grinding width: 50 mm, Exhibition machine: ACETI ART.70 Belt grinding and polishing machine with 2 motors 4.4 kW, 400 volts including 2 inverters T2 The machine is in our test room in Kobenz. Machine is new and has not run! GRINDING UNIT (left) - Sanding belt dimensions: 50 x 2500 - 3000 mm - Drive roller: 50 x ø 250 mm - Belt grinding arm: 0° - 90° - Belt speed: 18 - 36 m/sec POLISHING UNIT (right) - for grinding and polishing wheels: 300 x 35 mm - Brush maximum external size: 300 mm - Brush maximum width: 75 mm - Motor shaft diameter: ø 35 mm - Circumferential speed: 22 - 44 m/sec Size: W: 1650 x D: 600 x H: 2200 mm Volume: 73dB Weight: 295kg (without inverter) Dkedpoi Hp Nrefx Anzer

Condition: used, Year of construction: 2026, Machine characteristics Ergonomic and efficient design The CORMAK SZLIFMASTER-E is a modern machine designed for deburring, grinding and polishing sheet metal. The mobile head with two tool mounts allows simultaneous use of two different brush types, significantly improving processing efficiency. The adjustable arm enables control over pressure force, optimising performance and speed compared with manual operations. Advanced functions for maximum precision The machine is equipped with an adjustable spindle speed from 0 to 2,500 rpm, allowing full adaptation to different materials. The vacuum system ensures stable fixing of components, improving both precision and operator safety. Head operation is controlled through the swing arm, enabling smooth and effortless work. The head can rotate 180°, allowing the operator to quickly switch between tools — ideal for alternating between different brushes or polishing attachments as required. Fast and easy processing of various components The machine enables accurate processing of parts with different shapes and material thicknesses. Quick and reliable vacuum clamping ensures fast setup and secure workpiece holding during operation. Magnetic table with remote control – comfort and precision The machine features a magnetic table with adjustable clamping force for stable workpiece holding. The included remote control allows precise regulation of magnetic strength depending on part size and thickness. This gives the operator full control over the clamping force, ensuring high performance and safety. Technical parameters Table dimensions: 1,025 × 825 mm Maximum workpiece size: 1,000 × 800 mm Workpiece thickness: 0.5 – 200 mm Spindle speed range: 0 – 2,500 rpm Number of tools (discs): 2 Extraction capacity: 1,400 m³/h Magnetic table area: 180 × 300 mm Dedpszp E Hrsfx Anzokr Vacuum table area: 350 × 350 mm Arm reach: 1,300 mm Head rotation: 180° Head motor power: 0.75 kW Vacuum motor power: 1.1 kW Total power: 4 kW Machine dimensions: 1,200 × 825 × 1,400 mm Weight: 200 kg Thanks to its ergonomic design, advanced features and magnetic table with remote control, the CORMAK SZLIFMASTER-E is the perfect professional solution for sheet-metal finishing, increasing both efficiency and operator comfort. PLEASE NOTE!!! This machine is a returned item; it is second-hand but in working order. NO WARRANTY!!!

Condition: ready for operation (used), Indumasch Siegen 362 Grinding Pedestal Belt Grinding Machine Grinder -Belt width: 150 mm -Speed: 1400 / 2800 rpm 220V / 380V -Extraction unit You are welcome to arrange an inspection appointment. We can also organize cost-effective shipping for you! You will receive a proper invoice. Djdpfx Asyyn A Henzskr For international customers, a net invoice can be issued, provided a valid VAT ID number is supplied. Subject to prior sale. Visit our shop to see our other offers. All company names and trademarks mentioned are the property of their respective owners and are used for identification and product description purposes only. Deviations in technical data or errors in the item description may occur and are reserved.

Condition: good (used), HR 4 automatic polisher Manufacturer: Hau Dodpfx Aeqmfv Denzokr With 4 working spindles. 1 spindle is used for loading and unloading, two work spindles are in constant use.

Condition: used, WALTHER TROWAL circular trough vibratory finishing machine, type CLS-980 SA Serial No. 15.207, Year of manufacture 1972 Trough diameter 1850 mm Total outer height of trough approx. 1150 mm Working container / gross volume max. 980 liters Dedpfx Asdzqn Djnzjkr Usable volume approx. 490 liters Largest possible workpiece diameter approx. 300 mm (measured diagonally) Screen area 3400 cm2 Speed 1000 to 1700 rpm, stepless Motor power 22 kW Mains connection 400 volts, 50 Hz - Operating time adjustable manually and via timer - Stepless motor speed adjustment via DANFOSS drive controller, type VLT 3032 (frequency inverter) - Manually adjustable eccentric balance weights - Container with rubber lining - Sound-insulated cover with pneumatic cover opening - Manual separating flap - Integrated screen separation device after the separating flap - Liquid connection - Material outlet opening 470 x 300 mm - Control cabinet and drive controller for wall mounting - Partition cover with perforated screen - 1 crate of pyramid-shaped grinding media Space requirement L x W x H 3000 x 3000 x 2550 mm Transport dimensions L x W x H 2300 x 3000 x 2550 mm Weight 2500 kg Good condition Functional description: Workpieces and grinding media are set in motion and gently tumbled by the generated vibration. The constant relative movement between the workpieces and the grinding media causes deburring and surface finishing of the workpieces.

Condition: used, Double-sided grinding and polishing machine, MEYER, type SMP Dkodjdzqmhepfx Anzer Machine no. 848, year of manufacture 1963 Grinding and polishing disc diameter, max. 800 mm Shaft diameter 50 mm Grinding disc mounting, Ø 305 mm Disc spacing 1470 mm Working height 550 mm Speed 710 / 800 / 950 rpm Drive power 2 x 3 kW Mains connection 380 volts, 50 Hz - Two drive motors, one for each working side - Star-delta switch for each drive motor - Speed change by switching the drive belts - Dust extraction flange, Ø 100 mm - Two corundum grinding discs, 40 mm wide, approx. Ø 560 / 480 mm, are installed Space requirement L x W x H 1700 x 1200 x 900 mm Weight 850 kg Good condition

Year of construction: 2025, condition: as good as new (ex-display), With 250 mm diameter of grinding wheel - new equipment / demo unit for special price - this machine is a standard machine for manual preparation - optional we offer a specimen mover – please ask for details Machine ready for use: - basic machine disc diameter 250 mm - 250 mm platic grinding table - splash guard - disc cover - connections for cooling water & water drain Djdoptc Dopfx Anzjkr Optinonal: grinding paper, diamond grinding discs, polishing cloth, diamont suspensions inclusiv delivery by forwarder (Germany) delivery outside Germany on request offer not binding - subject to prior sale

Condition: ready for operation (used), - double grinding and plishing machine Dodpodz Uzbjfx Anzjkr - 1,5 kW - speed 1420 U/min - working hight is 600 mm - conical shaft

Condition: good (used), Year of construction: 2001, The system can also grind miters. Djdpfx Aoiqghzjnzjkr Connection value: 20.5kW Total length: 12500mm

Year of construction: 2018, condition: ready for operation (used), Glass thickness: 3-19mm, glass dimensions: 140-2000mm, speed: 0.1-10m/min, installed power: 61kVA (49kW, 86.4A, 400V), max. glass weight: 6170kg, working height: 920mm, max. opening speed: 30m/min, with transfer module Bottero TRANSFER 500P, weight: 1t. An on-site inspection is possible. Dkodpfxoxg Rhps Anzsr

Condition: refurbished (used), Year of construction: 2008, functionality: limited functionality, operating hours: 20,000 h, power: 60 kW (81.58 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, total width: 11,000 mm, total length: 12,000 mm, air pressure: 8 bar, pressure: 8 bar, Glass grinding/polishing line consisting of a loading manipulator, four-sided processing unit, and Triulzi washing machine. The equipment is dismantled and stored in a warehouse. The seller undertakes to assist with commissioning the equipment at the buyer's premises. The condition of the Busetti manipulator is as-is (very good condition). The Busetti P4 processing line has undergone a complete overhaul. The Triulzi washer has been partially refurbished. Dsdpfx Anoxxaitszekr

Condition: like new (used), Year of construction: 2008, functionality: fully functional, Complete factory equipment for sale: weaving, embroidery, dyeing, finishing, and processing. Many more machines are available. Textile Department * Jacquard Weaving: 11 × Picanol looms, Model 2004, XC 870 (Belgian) * Air-Jet Jacquard Weaving: 8 × Picanol looms, Model 2004 XL * Air-Jet Jacquard Weaving: 6 × Picanol looms, Model 2004, 5400 Jacquard Bonas, Jumbo * Complete set of air compressors, dryers, and air tanks required for operating the weaving machines. * Dobby Weaving: 4 × Picanol Omni looms, Model 1999 * Air-Jet Dobby Weaving: 8 × 2004 looms, 2.5 m working width, suitable for producing linen, gabardine, and dress fabrics (Picanol Omni Plus) * Rapier Weaving Machines (Chinese): Model 2014 – 4 units * Modern Warping Machine: 720 / 11 cones – 1 unit * Karl Mayer Weaving Machines: Model 2021 – 4 units * Karl Mayer Weaving Machines: Model 2017 – 2 units * Sizing Machine: 3 units ⸻ Embroidery Department * Saurer Epoca Embroidery Machines: 4 machines, equipped with 5 special attachments * Spooling/Winding Machines: Belinda – 9 units * Spooling/Winding Machines: Barmag – 1 unit, Kaltema – 2 units * Complete set of air compressors, dryers, and air tanks required for operation. * Mouline Thread Production Line with all accessories (embroidery threads). ⸻ Finishing Department * Rams: 1 × Brückner, 6-chamber, with Mahlo, Model 2002 * Stenters: 3 Turkish Damson machines * Fabric Inspection Machine: 1 unit * Sewing Machines: 30 units * Fabric Pressing and Packaging Machine ⸻ General Factory Utilities * Industrial Chillers: 2 units * Steam Boiler: 6 tons, Riello burner, 2018 * Steam Boiler: 0.5 ton * Fabric Dyeing Jet Machine: 50 kg * Yarn Dyeing Machine (Hank): 600 kg * Yarn Dyeing Machine: 2 × 300 kg, complete with winding and unwinding system Dkodoziz Dyjpfx Anzjr * Hydro Extractor: 1 for yarn + 1 for fabrics + 1 for hanks

Condition: new, Year of construction: 2026, We have various kinds of ball grinding mill such as batch ball mill, rod mill, cement ball mill, mining ball mill, welcome to contact our team for further details according to your specific requirements. Dsdpoq I Nw Isfx Anzokr

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, machine/vehicle number: 81019 01, grinding depth: 500 mm, grinding diameter: 800 mm, grinding spindle speed: 250 rpm, workpiece diameter (max.): 800 mm, pivoting range: 15 °, Machine in special design with increased grinding diameter and extended, hydraulic cross travel! Reconstructed and modernized in 1995 at the manufacturer's plant in Glauchau and commissioned in 1996. TECHNICAL DETAILS Working area and grinding diameter Internal grinding diameter: 30–630 mm Extended internal grinding diameter max.: 800 mm External grinding diameter max.: 800 mm Workpiece diameter max.: 800 mm Grinding area and table movement Grinding depth: approx. 500 mm Table stroke: 800 mm Grinding diameter with workpiece protection max.: 800 mm Grinding diameter without workpiece protection: approx. 850 mm Distances and adjustments Distance workpiece spindle head – grinding spindle carrier: max. 1,225 mm Adjustment of the internal grinding attachment on the table: max. 545 mm Cross travel of the workpiece spindle stock: max. 650 mm Swiveling of the workpiece spindle stock: max. 15° Workpiece spindle Workpiece spindle speeds: 16 / 22 / 32 / 45 / 63 / 90 / 125 / 180 / 250 rpm Workpiece weight: max. 1,000 kg Spindle head: DIN 55021, size 11 MACHINE DETAILS Dedpfx Anezqcvtjzjkr Control and position display Control type: conventional Cross travel: via geared motor and positioning device Digital position display: HEIDENHAIN, 2 axes Coolant system Coolant system: with magnetic separator Machine weight: approx. 6.4 t EQUIPMENT Coolant system with magnetic separator Fixing devices or machine feet Various grinding wheels Diamond dressing tool Large grinding plate Internal and surface grinding attachment Halogen machine lamp Machine documentation

Condition: like new (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: 163190, grinding length: 600 mm, grinding width: 300 mm, workpiece weight (max.): 270 kg, grinding wheel diameter: 350 mm, distance table to spindle center: 565 mm, Like-new horizontal surface grinding machine with few operating hours! TECHNICAL DETAILS Grinding area Grinding length: 600 mm Grinding width: 300 mm Work table and workpiece load Table dimensions: 300 mm × 630 mm Maximum workpiece weight: 270 kg Distance spindle axis – table surface: 565 mm Travel distances and feeds Travel distance X-axis: 765 mm Travel distance Y-axis: 340 mm Scale ring graduation Y-axis: 0.02 mm Scale ring graduation Z-axis: 0.005 mm Automatic transverse feed Z-axis: 0.1–8 mm Feeds and rapid traverses Hydraulic feed X-axis: 7–23 m/min Rapid traverse Y-axis: 990 mm/min Rapid traverse Z-axis: 460 mm/min Grinding wheel Grinding wheel dimensions: 350 mm × 40 mm × 127 mm MACHINE DETAILS Control type: Conventional 2-axis position indicator: KNUTH Xpos 3.1 Motor power grinding spindle: 5.5 kW Total power requirement: 7 kW Dimensions & Weight Machine dimensions: 2,800 mm × 2,200 mm × 1,890 mm Machine weight: approx. 2.7 t EQUIPMENT 2-axis position indicator KNUTH Xpos 3.1 Grinding wheel Grinding wheel flange Balancing arbour Balancing stand Halogen work light Magnetic chuck 600 mm × 300 mm Adjustment screws Operating tool Automatic transverse and longitudinal feed Hydraulic table longitudinal movement Double V-guides for the longitudinal movement Combined V- and flat guides for the transverse movement Hardened and ground table guide rails with PTFE counter coating Grinding spindle with maintenance-free, preloaded precision angular ball bearings External hydraulic unit Automatic central lubrication Dkodpfszqcvgsx Anzer

Condition: used, Tschudin HTG310 Universal Cylindrical Grinder Centre height: 100mm Distance between centres: 340mm (13.4") Maximum grinding diameter: 200mm Maximum grinding length: 340mm Hydraulic table traverse Table swivel: ±11° Wheelhead swivel: ±5° Workhead swivel: 360° Infinitely variable workhead spindle speed: 50–500 RPM Automatic plunge and traverse grinding cycles Automatic infeed with adjustable spark-out timer Rapid wheelhead advance and retract Hydrodynamic wheelhead bearings for exceptional accuracy Grinding wheel size: 350 x 50 x 127mm (14" x 2" x 5") Fitted With Hydraulic table drive Universal workhead Dkjdpfezrt Ipsx Anzjr Tailstock Coolant system Wheel guard Machine lighting

Condition: ready for operation (used), functionality: fully functional, Brierley Universal Automatic Drill Grinder Model: ZB 32 Capacity: 2.5-32mm With Cams Dedpfx Aezlhlponzokr

Condition: ready for operation (used), functionality: fully functional, total width: 355 mm, total length: 381 mm, total height: 1,270 mm, grinding wheel diameter: 203 mm, Dormer Automatic Drill Grinder Dkodpozlg Szofx Anzsr Model: 108

Condition: good (used), Year of construction: 2011, Maximum grinding diameter 290mm, maximum grinding length 800mm, Dkedpfxjtudfdo Anzor grinding wheel size 290mm x 63mm bore. Control Fanuc 21i-TB, workhead speed 1,000rpm, spindle power 5Kw, table swivel +6/-3.5 degrees, workhead swivel angle 0-90 degrees. internal spindle motor 1.5kw. fitted with coolant.

Condition: refurbished (used), Year of construction: 1989, functionality: fully functional, rotary table diameter: 1,500 mm, grinding height: 457 mm, total height: 3,124 mm, total width: 3,150 mm, total length: 4,165 mm, overall weight: 15,000 kg, grinding wheel diameter: 863 mm, grinding spindle speed: 450 rpm, power: 45 kW (61.18 HP), table diameter: 1,500 mm, LUMSDEN Model 93ML Vertical Rotary Surface Grinder. Refurbished with new bearings in table and spindle, reconditioned main motor, new rectifyer, lubrication system, new control panel. Serial Number: to be advised New 1980's originally Country of Origin: UK Segmental wheel dia 34" Segments per set 16" Dodpfswugh Dex Anzekr Table dia and grinding capacity 60" Magnetic table dia (Humphreys) 60" Max height wheel to Magnetic table 18" Minimum height of wheel to table 4.1/2" Spindle speed 450 rpm. Table speeds 16 and 5.1/2 rpm. Automatic feeds 10 rates .004-.040 ins/min. Power elevation 25 ins/min. Spindle motor 60 Hp / 960 rpm 45 kW Table motor 6/2.1/2 HP /1440/480rpm. Feed motor 1/4 Hp / 1440 rpm. Elevation motor 1 Hp / 720 rpm. Coolant pump motor 1 Hp / 1440 rpm. Overall height of machine 10'3". Floor space 13'8" x 10'4". Approx net weight 15 tons.

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: FPS-20-RS, Schiatti Angelo FPS 20 RS 2015 Excellent condition 10 spindle glass edging machine including cerium wheel Djdpjzrx Inofx Anzskr Can dismantle and load for buyer

Condition: used, Model: CW Serial No: 26520 Capacities: Maximum Swing Over Bed: 430mm Djdpsyx Hx Defx Anzjkr Maximum Distance Between Centres: 2500mm Wheel Dimensions: 660x 75mm Work Head Speeds: (3) 20 – 160rpmrpm Wheel Head Speeds: 735rpm Table Swivels: Electrics: 415v, 3ph, 50 Cycles Motors Wheel Head: 20 HP 975rpm Work Head: 3HP 1120rpm Complete With: 2 No 2 Point Open Steadies Complete Tailstock Mounted Wheel Dressing Attachment Coolant Approximate Dimensions: 6,750 x 2000 x 1800mm Approximate Weight: 9,000kg