Used Granite Surface Plate for sale (17,712)

Condition: good (used), Cast iron bed - Floor Plate Useful surface (L x W x H): 3600 x 1200 x 300 mm 4 T-slots: width 44 x 26 mm Equipped with Levelling feet Cgodpfx Aezg Hkyohvow Weight: approx 3 T

Condition: used, Cast iron bed Length: 2300 mm Width: 1900 mm Thickness: 200 mm Height on feet: 980 mm 5 T-slots horizontal and vertical T-slots dimensions: 60 x 35 mm Square dimensions: 365 x 365 mm Crack at a longitudinal T (see photo) Cjdpozg Hfqsfx Ahvogw Weight: approx 3 T

Condition: used, functionality: fully functional, machine/vehicle number: 2550X10.14MM, control type: manual, degree of automation: manual, actuation type: mechanical, number of rollers: 3, roller (top) diameter: 300 mm, side roll diameter: 280 mm, roller diameter: 400 mm, roller length: 2,550 mm, working width: 2,500 mm, working height: 800 mm, sheet thickness (max.): 14 mm, sheet thickness stainless steel (max.): 10 mm, input voltage: 380 V, input frequency: 50 Hz, Equipment: centralized greasing system, cone bending device, emergency stop, swiveling upper roller, 3 roll 2500x14 mm Plate bending machine Model OMCCA ITALY CAPACITY plate width 2500 mm plate thickness 14 mm pre-bending 10 mm --- Useful rollers width 2550 mm Top roll d 300 mm Side rollers D 280 mm hard surface of the 3 rolls centralized gear unit side rolls driven Opening front hydraulic drop-end to unload the closed shell. Extended shafts to take installation of add-on molds for section bending Variable speed rolling up to 5 mtr/min power electric motor 20Hp on hydraulic unit console with electric push buttons commands. Dial gauge position rollers readout safety installations with emergency stop Csdpfxey Aubuj Ahvegw

Condition: excellent (used), functionality: fully functional, Year of construction: 2020, roller diameter: 60 mm, working width: 1,050 mm, sheet thickness (max.): 1 mm, roll metal bending machine Isitan 1050 X 1.2mm Manual 3 roll Bending Machine, excellent condition for sale Cgsdpewk Rlxjfx Ahvow manufacturer: Isitan 1050X1.2 max sheet width: 1050mm max sheet thickness: 1.2 mm Wire grooves at the ends of the rollers Conical bender roller diameter: 60mm Upper roller removable for easy workpiece removal machine dimensions: length: 130cm height: 100cm width: 65cm weight: 240kg

Condition: reconditioned (used), Year of construction: 1990, operating hours: 10 h, functionality: fully functional, machine/vehicle number: S3370, type of input current: three-phase, CM M1500 Shot Blasting Machine CM S 3370 Maximum product dimensions: - Maximum product height: 1500 mm (measured under the hook) - Maximum diameter: Ø 1200 mm - Maximum weight: 700 kg - Equipped with 2x load-bearing hooks - 3x Turbine Ø 330 mm, 6-blade configuration - 3x Turbine: 1450 / 950 RPM – 5.7 kW / 4.1 kW Dahlander motors - Hook movement manual - Automated hook feed into the machine - Automated door operation - Fully overhauled CM shot blasting installation Mechanical and electrical systems have been completely refurbished to specification: Mechanical: - Motors & drives completely disassembled, fitted with new bearings and new seals - Blast cabin fully overhauled (sheet metal and doors), cabin prepared for manganese steel armor plates (hook brackets provided); cabin comes standard with original rubber lining, manganese steel armor as an optional extra - All augers replaced and fitted with HARDOX auger flights - All auger bearings replaced - Abrasive media elevator fitted with new elevator belt, return wheels & bearings - All chain drives & sprockets replaced - Hook feed system to machine modernized - Hook drive system completely overhauled - Compressed air supply replaced - Pneumatic cylinders & valves renewed/overhauled - 3x turbines fitted with new wear parts and new turbine wheels Ø 330 mm Electrical: - Machine fitted with 3x Turbine Ø 330 mm with dual-speed control (2-speed motors) - Siemens electric motors preventively rewound & tested, fitted with new bearings - Electrical control system completely replaced by SIEMENS S7-1200 PLC & control panel Cgjdpfexqzmkjx Ahvow - Electrical control panel completely renewed with new relays, fully compliant with 2023 standards - Fitted with 3x SKF servo-controlled abrasive dosing systems. Abrasive supply is infinitely adjustable via the control panel for effortless switching within the two-speed blasting process - Equipped with Pilz safety equipment for turbines and moving parts, including emergency stop circuits The machine is fully operational and available for immediate sale. The machine can be fully tested at our facility in Soerendonk (test runs without abrasive media). 1-year warranty on the machine (excluding wear parts) when sold within the Netherlands.

Condition: used, functionality: fully functional, machine/vehicle number: 7FBMF35-16267, Year of construction: 2013, operating hours: 6,500 h, load capacity: 3,000 kg, lifting height: 4,700 mm, fuel type: electric, mast type: triplex, Electric Forklift Truck – Toyota Year of manufacture: 2013 Technical data: Cedpfjw Hhwwex Ahvsgw • Model: Toyota 7FBMF30 • Load capacity: 3,000 kg • Drive: Electric (battery powered) • Mast type: Triplex with free lift • Lift height: approx. 4,300 – 4,800 mm • Fork length: 1,070 mm (standard) • Tyres: Solid rubber • Cabin: Open design, optionally with driver protection roof • Condition: Used, serviced and fully functional

Year of construction: 2006, operating hours: 30 h, condition: used, functionality: fully functional, machine/vehicle number: 4292-1-197652, Used process plant from production changeover. The unit is suitable for applications involving viscous or temperature-sensitive media. Sale from location, inspection possible by appointment. Csdpfxey Akm Hj Ahvegw

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: Inv.119140, total length: 26,000 mm, total width: 9,000 mm, Equipment: cabin, lighting, 1 used painting line, featuring circulating conveyor belt, manual spray booth for sample coating, automatic spray booth equipped with robot and workpiece rotary holder, reverse osmosis system for DI water, paint preparation, and exhaust air treatment system. The system operates two shifts in serial production. Manual loading and unloading onto a conveyor belt; otherwise fully automatic. 18.7.25: Update: Dismantling is to be carried out from September 2025 on-site in Lohr by the buyer. The buyer is responsible for all costs related to dismantling, packaging, collection, and transport to their own facility (FCA terms). The area must be vacated no later than mid-January 2026 for installation of new production machines. For further details, see attached handout/flyer. Due to the significant effort required for dismantling, early and thorough planning with the disassembly company is essential, as is prompt contact or a visit to the site. Additional information is provided in the attached handout. --- 1 used painting line, with circulating conveyor, manual paint booth for samples, automatic paint booth with robot and workpiece rotary fixture, reverse osmosis system for DI-water, paint preparation, exhaust air treatment. Info in English, French, Spanish available upon request. --- Please indicate your offer price. Sale only within the EU, Switzerland, Turkey, and United Kingdom. Dismantling to be performed by the buyer. --- No packaging; all warranty rights are excluded. Should you wish to dismantle the system yourselves, please indicate this in your offer. We do not guarantee the accuracy of technical data, completeness of accessories and tools, or compliance with all safety and environmental regulations as per accident prevention guidelines. Cgjdpfjwqg Iiex Ahvjw

Condition: new, Surface Shields SC300XL 200 pcs Shoe Covers. Please check out our other listings as well. Cgjdpfx Ahovxvlzjvew

Condition: like new (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: PW2000-003, workpiece weight (max.): 2,000 kg, overall weight: 1,310 kg, table length: 1,400 mm, table width: 900 mm, The machine is in like-new condition! TECHNICAL DETAILS Maximum load capacity: 2,000 kg Tables and support surfaces Number of tables: 2 Support surface per table: 1,400 x 900 mm Swiveling movement Swiveling angle of the tables: 100° Angle of the load-bearing steel profiles: 90° Table travel distances: approx. 300 mm MACHINE DETAILS Csdpfszd A Rdox Ahvsgw Dimensions & Weight Dimensions (L x W x H): approx. 2,600 x 1,800 x 1,300 mm Machine weight: 1,310 kg Machine operating principle: The turning device consists of two opposing tables, each with a support surface of 1400 x 900 mm. On the side of the table that is facing downwards during swiveling, the load-bearing steel profiles are angled upwards by 90° in order to securely hold the plate to be turned even in a vertical position during the 90° swiveling process. Both tables are arranged opposite each other and are swivelled by 100° using hydraulic cylinders. The tables are mounted on a load-bearing substructure, on which one table is fixed and the other is movable relative to it. The movement is carried out by hydraulic cylinders, which can move the table, which is mounted on rollers, by approximately 300 mm. The substructure also supports the hydraulic and electrical components. A hydraulic unit serves as the drive source, supplying the cylinders with oil according to the control commands. The corresponding valves are electrically and/or hydraulically controlled and initiate and maintain the movements of the tables required for their interaction until the turning process is completed. Particular attention is paid to the safety of the movements and the precise adjustment of the table movement in the interaction between pressure and tension when designing the hydraulic system. The geometry of the axes of rotation of the tables results in a change in the load effect on the tilting cylinders. The hydraulics are designed in such a way that the required performance is ensured and an overload of the components is not possible during normal operation. Corresponding filters, combined with a generously sized tank volume, ensure a high availability of the hydraulic system. The necessary electrical control is completely housed in a steel sheet metal enclosure, which contains all the required components. The core of the control is a PLC, in which the operating parameters are processed according to the program specification. In addition, the emergency stop function and all the relays and output units required to control the functions are installed. The turning device is operated via a control panel in which a touch panel is used to input the function parameters, such as swivel table 1 up, swivel table 1 down, move table 1 forward, move table 1 backward, swivel table 2 up, swivel table 2 down, as well as start or stop the automatic mode. In order to avoid a collision of the tables in manual operation, the PLC programming is designed in such a way that this is prevented by the data on the table position and the respective table inclination. After the emergency stop situation has been resolved, the PLC control automatically completes the turning process. The turning device is equipped with heavy-duty rollers and can therefore be moved.

Condition: ready for operation (used), Year of construction: 1972, functionality: fully functional, grinding length: 4,000 mm, grinding width: 500 mm, spindle speed (max.): 1,400 rpm, overall weight: 11,000 kg, TECHNICAL DETAILS Max. grinding length: 4,000 mm Max. grinding width: 500 mm Max. distance between table and spindle center: 900 mm Table speed: 3 - 25 m/min Spindle speed: 1,400 rpm Grinding spindle motor: 11 kW Dimensions of magnetic clamping plates: 4 x 1,000 x 500 mm MACHINE DETAILS Weight: approx. 11 tons EQUIPMENT Csdpfxszd Rqle Ahvegw Including complete electrical system Permanent magnet plate Cast iron bed (overhauled in 2011) New hydraulics and digital Z-axis Swiveling spindle

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: E1TAH0029, grinding length: 600 mm, grinding width: 300 mm, grinding wheel diameter: 304 mm, table length: 600 mm, table width: 300 mm, TECHNICAL DETAILS Grinding length max.: 600 mm Grinding width max.: 300 mm Distance from table surface to spindle center: 585 mm Cgjdpfx Ahozgux Sjvjw Grinding wheel dimensions: 304 x 31.75 x 76.2 mm Table and magnetic plate Table size: 600 x 300 mm Magnetic plate: 600 x 300 mm Axis movements Table longitudinal movement, hydraulic: 650 mm Transverse movement, automatic: up to 310 mm Machining: fully automatic in 3 axes Spindle and power Grinding spindle power: 3.7 kW Spindle speed, frequency inverter, max.: 2,100 rpm MACHINE DETAILS Dimensions and weight Dimensions: approx. 2,700 x 1,600 x 1,850 mm Machine weight: approx. 1,990 kg EQUIPMENT Fully automatic machining in 3 axes Touchscreen control panel with program management Automatic central lubrication Cooling system with automatic paper filter Enclosed splash guard with lighting Electronic handwheel

Condition: new, Unused Alfa Laval model AQ4T-BFG approximately 15sqmt heat transfer area 316L stainless steel plate heat exchanger. Unit rated 12 bar design pressure at 150 deg.c. Cedozimvuepfx Ahvsgw

Condition: used, SNOW surface grinder Type PP year 1960 Table Size: 96" x 56" 2.4m x 1.4m Operating height: 57" 1.5m Cgodpfxezhx Ers Ahvew Fully working Recently reconditioned, mechanically and Electrically, New coolant system and hydraulics for slideways. all relevant paperwork supplied. All machine tool original manuals supplied. Grinding to 0.0005" tolerance .

Condition: excellent (used), Specification - Work head Maximum work piece weight between centres 100kg Speed range30/450 rpm Centre - standard/reduced to 5MT / 3MT Swivel angle, clockwise / counterclockwise 15° /90° Wheelhead (X axis) Maximum diameter ground: using a 350mm dia wheel - 300mm Using a 300mm dia wheel - 350mm Total infeed 245mm Maximum programmable dia infeed rate 100mm/min Minimum programmable increment (dia) 0.001mm Swivel range clockwise / counterclockwise 190° / 45° External grinding wheels Wheel size (left) 350 x 50 x 127mm Wheel size (right) 300 x 25 x 127mmm Spindle speeds 1775, 2068, 240rpm Motor 4kW Internal grinding wheels Wheel size 19 - 38mm Wheel spindle speeds 16500,24000,10500rpm Motor 2.2kW Table (Z Axis) Maximum grinding length between centres: 1300X - 700 - 700mm 1300X - 1000 - 1000mm Cjdpfx Ajzh Nfcehvsgw Maximum traverse speed 5000mm/min Minimum programmable increment 0.001mm

Condition: used, Lumsden 92 ML Vertical Spindle Rotary Surface Grinder , 48 Inch dia chuck, autosizing, table jog facility, Filtermist unit fitted with (2) extraction vents to rear of table guards, fitted with segmented wheel, serial number 92ML/109/11821. Machine tools manuals. Coolant filtration tank. Also with unused grinding stones segmented. Cedpfsyabc Ejx Ahvogw Table Diameter 48″ / 1219mm, Segmental Wheel Dia. 28” / 711mm, Max. Height Capacity 22.5″ / 572mm, Spindle Speed 550rpm, Table Speed 6 & 18rpm, Auto Feed 0.004-0.04 ins/min – 0.1-1.0 mm/min, Spindle Motor 50HP / 35Kw, Floor Space 14′ x 11′ / 4394 x 3353mm, Approx. Net Weight 12T/12200Kg, Approx. Gross Weight 13.5T /13700Kg

Condition: good (used), Top of the range plate washing system for high throughput. Has come from Wembley Football Stadium where it was washing plates for the hospitality areas. Lovely condition and with options Cgedpfx Aevd Eiyohvew

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 1761-1700, 457 x 152mm capacity. Equipped with magnetic chuck, power rise and fall to wheel head, table guard, coolant system, and dust extraction. SPECIFICATION Jones & Shipman Model 540P Working Surface of table 457 x 152mm Longitudinal traverse of table, hand and hydraulic 483mm Total cross traverse of table, hand and hydraulic 168mm Floor to table height 1035mm Table traverse speed range per min 1.5 – 18m Cross feed range per stroke at each reversal 0.178 – 1.78mm Micrometer cross feed graduated in Vertical feed adjustment in increments of 0.002mm Vertical movement of wheelhead (max) 280mm Wheel spindle center to table (min) 50mm Size of grinding wheel 180 x 13 x 31.75mm bore Speed of wheel 2880rpm Wheelhead motor 1.5kW Cedpenxi Uuefx Ahvegw Hydraulic pump motor 0.55kW Machine in Imperial execution MACHINE EQUIPPED WITH Magnetic chuck Power rise and fall to wheel head Table guard Wheel guard Coolant System Dust extraction

Condition: excellent (used), Year of construction: 1984, functionality: fully functional, machine/vehicle number: BO 94392, A familair machine in any toolroom, this Jones and Shipman 540P is equipped with a 6″ x 18″ magnetic chuck, power rise and fall, coolant system and dust extraction. A toolroom institution: USED Jones & Shipman Model 540P Horizontal Spindle Surface Grinding Machine Specification Working Surface of the table 457 x 152mm Longitudinal traverse of table, hand and hydraulic 483mm Total cross traverse of table, hand and hydraulic 168mm Floor-to-table height 1035mm Table traverse speed range per min 1.5 – 18m Cross-feed range per stroke at each reversal 0.178 – 1.78mm Micrometer cross feed graduated in Vertical feed adjustment in increments of 0.002mm Vertical movement of wheelhead (max) 280mm Wheel spindle centre to table (min) 50mm Size of grinding wheel 180 x 13 x 31.75mm bore Speed of wheel 3000rpm Cgsdpfx Ahenxi R Ujvjw Wheelhead motor 1.5kW Hydraulic pump motor 0.55kW Machine in Imperial execution Machine equipped with Magnetic chuck Power rise and fall to wheel head Table guard Wheel guard Coolant System Dust extraction Lighting

Condition: ready for operation (used), functionality: fully functional, grinding length: 800 mm, grinding width: 350 mm, Magnet, 800 x 350 mm. Cjdpjzimmmofx Ahvjgw

Condition: ready for operation (used), Year of construction: 1986, functionality: fully functional, The machine is in good working order. See the video. Cedpfxszimhwo Ahvogw

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, The machine is in good working order. See the video. Codezimgyspfx Ahvegw

Condition: used, Year of construction: 1963, total length: 2,000 mm, total width: 800 mm, total height: 1,400 mm, Empty weight: 1.000 kg - Year: 1963 - Documentation available: No - CE certificate present: No - Serial number: H2111 - Drive system: Conventional - Number of rolls [pcs.]: 3 - Max. sheet thickness [mm]: 3 - Max. working width [mm]: 1550 - Transport dimensions: 2000mm x 800mm x 1400mm (l x w x h) - Transport weight [kg]: 1000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum Csdjzhw Dtepfx Ahvogw

Condition: excellent (used), Fries Research & Technology Device Designation: FRT MicroProf® MPR 1250 The FRT MicroProf® MPR 1250 is a high-precision surface metrology system from the MicroProf® series by Fries Research & Technology GmbH (FRT). These systems are designed for non-destructive and contactless analysis of surface parameters such as topography, roughness, layer thickness, and more. Features of the FRT MicroProf: Device Details: Model: FRT MicroProf® MPR 1250 Item Number: 200 00 Sensor Type: CWL 300 µm Serial Number: 0904001 Measurement Principle: Chromatic confocal point sensor Light Source: Halogen lamp, white light Vertical resolution: up to 3 nm Measurement accuracy (Z): 100 nm Lateral resolution (XY): 2.5 µm Measurement angle to surface: 90° ±30° Max. sample size: approx. 310 x 310 x 50 mm Technical Data (Excerpt): XY-Stage: Type: Compact XY-cross table Travel (measurement range): 200 x 200 mm Guidance: mechanical cross roller guide Drive: DC motor with ball screw Position feedback system: Heidenhain glass scale with reference mark System resolution: 0.2 µm Repeatability: < ±1 µm Orthogonality XY: < 4 µm / 200 mm Vertical runout (per axis): < 2 µm / 200 mm Z-Axis (motorized): Type: Linear axis Travel: 50 mm (optional 100 mm) Drive: Stepper motor with spindle drive Lateral runout: < 2 µm / 50 mm Manual Coarse Adjustment (optional): Type: Dovetail guide Adjustment range: up to 300 mm sample height Measurement: Minimum point spacing (XY): 0.6 µm Sample size: approx. 310 x 310 x 50 mm Max. sample weight: 5 kg (optional 10 kg) Measuring speed: 1 µm/s up to max. 100 mm/s System: Total weight: approx. 275 kg (measurement setup: 225 kg) Footprint (measurement setup): approx. 0.9 x 0.8 m Dimensions control unit (W x D x H): approx. 0.55 x 0.53 x 0.32 m Power supply (EU/US): 110–240 V, 50–60 Hz, 16 A Power consumption: approx. 300–400 W Operating Conditions: Temperature range: 22 °C ±5 °C Temperature stability: < 0.5 °C Cgodjzii Ruopfx Ahvjw Weight approx. 500 kg Condition: The device is in very good technical and cosmetic condition. All axes move precisely and smoothly. Scope of Delivery: MicroProf® MPR200 00 XY measuring system Control unit Connection cables (Subject to technical modifications and errors. All information without obligation!) Inspection and onsite testing available by appointment. For further questions, feel free to contact us by phone.

Condition: good (used), Year of construction: 1999, CNC PUNCH / DRILL / SHEARING LINE for angle and plates. TECHNICAL DATA. PUNCH INSTALLATION. MATERIAL SPECIFICATION material sample steel 52 plate size (MM) X (MM) max 300 x 25 material sample steel 37 plate dimension (MM) X (MM) min 60 x 6 max 400 x 20 angle line dimension min 50 x 50 x 5 max 150 x 150 x 5 Punch information TYPE P2- XXX-XX number 2 TYPE P3-XXX-XX number 3 TYPE P5-XXX-XX number 5 punching capacity tonnage 110 punching diameter (mm) x thickness (mm) max 32 x 20 Shear UNIT Shear tonnage 180 Capacity max 400 x 20 Stamping UNIT Total number of characters number 40 Maximum number of characters per operation 12 CONNECTION VALUES Voltage 3 phase + Neutral + Earth V 3 X 400 Fuse A 63 slow Power KW 25 Frequency HZ 50 Permitted m-axis tolerance mains voltage % +/- 10 Field rotation Right Air pressure bar 6-8 Air capacity m2 / hour 250 Cgodpfx Aevkphgehvow