Used Gravel Filter for sale (6,659)

Condition: used, This listing is for a LTE Scientific Unitemp filtered air drying Cabinet The unit is in full working condition and is ready for immediate release LTE Scientific Unitemp Filtered Air Drying Cabinet The LTE Scientific Unitemp Filtered Air Drying Cabinet is designed to provide a controlled, contamination-free environment for drying laboratory equipment. Featuring a fine filter on the air intake, it minimizes particulate contamination, ensuring that freshly washed items remain clean throughout the drying process. Key Features: Capacity: 534 liters, offering ample space for various laboratory drying needs. Temperature Control: Thermostatically controlled with a range from 5 °C above ambient to 65 °C, protected by an over-temperature cut-out device for safety. Nlsdpfxexv D Eyo Ahzeb Air Circulation: A fan circulation system ensures even heat distribution for consistent drying. Construction: Toughened plate glass door for easy monitoring and access. Additional Drying Cabinet Options: Economy Drying Cabinets Large capacity cabinets available at an economical price. Heaters are positioned at the bottom of the cabinet below a perforated base plate and vent through the top. Fan extraction models enhance drying efficiency by actively drawing air through the chamber. Temperature is controlled via a regulator.

Condition: used, This listing is for the Restek Single Position Base Plate Gas Filter Kit + SGT Gas Filter Kit The unit is in full working condition and is ready for immediate use The Restek Single Position Base Plate Gas Filter Kit is a modular system designed for gas purification in laboratory applications, particularly in gas chromatography (GC) and mass spectrometry (MS) systems. Key Features Baseplate Design: The single-position baseplate (catalogue number 22025) is constructed from brass and measures 10.2 × 10.2 × 4.8 cm. It is compatible with all standalone Super Clean gas filters Filter Cartridges: Restek offers various filter cartridges, such as the triple filter that removes oxygen, moisture, and hydrocarbon impurities, and the fuel gas filter designed for moisture and hydrocarbon removal. Fitting Compatibility: The baseplate accepts 1/8" tubing. To adapt to 1/4" tubing, 1/8" to 1/4" tube end reducers are available. Material Options: End fittings are available in brass or stainless steel, allowing for customization based on application requirements Restek SGT Superclean Gas Filter Kit The Restek SGT Superclean Gas Filter Kit is a high-purity gas purification system designed to remove contaminants such as moisture, oxygen, and hydrocarbons from carrier and fuel gases used in gas chromatography (GC) and mass spectrometry (MS). This kit is particularly beneficial for applications requiring ultra-pure gas supplies to ensure accurate and reliable analytical results. Key Features High-Purity Output: Delivers gas purity levels exceeding 99.9999%, depending on the incoming gas quality and flow rate. Versatile Compatibility: Compatible with various gas types, including inert carrier gases, air, hydrogen, and helium. Quick-Connect Design: Features a user-friendly quick-connect system for easy and leak-free filter cartridge changes. Durable Construction: Constructed with a glass interior to prevent diffusion and a polycarbonate exterior for safety. Nedpfx Aexv Dk Nshzslb Visual Indicator: Each filter cartridge includes an easy-to-read color change indicator to signal when replacement is necessary.

Condition: new, All Items Boxed in original Packaging. Supplier Catalogue No 5555305P9-SS-A EXPIRY DATE 31st July 2026 All Items Unused and boxed in there original Packaging - 4 Pieces Nsdpfxjxhdvce Ahzelb Sartorius Lab Instruments Sartopure GF+ MidiCaps (0.65 µm, BH9, 4 pcs) are high-quality filter capsules designed for microbial removal and particle filtration in laboratory and industrial applications. Here’s a breakdown of their key features and specifications

Condition: used, This listing is for a Pall Palltronic Compact 200 Filter Integrity Test Unit. Nlodpfx Ahoxx Avijzsb The unit is in full working condition and is ready for immediate release.

Year of construction: 2022, condition: like new (used), functionality: fully functional, Filter never used, still in the box. Model: NYB‑30 Filter Area: 30 m² Cake Volume: ~600 L Capacity: 6–8 T/h (crude oil) Working Pressure: 0.1–0.4 MPa (max 0.5 MPa) Shell Temperature: ≤ 150 °C Machine Volume: ~2,300 L Weight: ~2,500 kg Shell Diameter: ~1,200 mm Plate Spacing: 70 mm Inlet/Outlet: DN 50 inlet/outlet, DN 40 overflow, DN 500 discharge Total Height: ~3,150 mm Key Features: Hermetic sealed vertical structure – no leakage or odor Nlsdpfx Ahjwwmzijzeb High filtration precision – ideal for pre-degumming and post-bleaching crude oils Low maintenance – long service life of filter plates Simple cake discharge – hydraulic or manual vibration release Can be steam jacketed – optional heating for waxy oils Filter aid compatible – supports use of bleaching earth or diatomaceous earth Typical Applications Crude oil clarification after settling Bleaching earth filtration (after bleaching tank) Post-degumming or post-neutralization polish Winterization step before dewaxing Food, biodiesel, cosmetic-grade oil prefiltration

Condition: used, machine/vehicle number: 10E5T60-1001, KEB Automation EMC Filter, part no. 10E5T60-1001, is an advanced passive component from the COMBILINE series, designed to eliminate high-frequency electromagnetic interference in drive systems. The device is specifically dedicated for use with KEB COMBIVERT F5 series inverters (housing sizes F4 and F5). Technical Specification: - Rated Voltage (UL): 480V AC - Max. Input Voltage: 3-phase, up to 528V AC - Rated Current (UL): 6.7 A Nledpjy Dqbmofx Ahzob - Rated Current (nominal): 8.0 A - Mains Frequency: 50/60 Hz - Number of Phases: 3 phases + PE - Operating Temperature Range: up to 45°C (Class 3K3) - Protection Degree: IP20 Key Functions and Application: - Interference Suppression: The filter effectively blocks conducted radio frequency interference (RFI/EMI) in the range of 150 kHz to 30 MHz. - Mains and Device Protection: Prevents harmonics generated by high-speed IGBT switching in inverters from entering the power grid, protecting sensitive electronic equipment. - Standard Compliance: Helps meet EMC requirements according to EN 61800-3 for categories C1 and C2. - Mounting: Designed for control cabinet installation, often on a 35 mm DIN rail.

Condition: good (used), Year of construction: 1991, material Stahl weight 300 kg turning speeds 1400 U/min motor 75 kW The Höcker Polytechnik L 300 industrial blower, built in 1991, impresses with its robust construction and an impressive air flow rate of 7,200 m³/h. With a 7.5 kW motor and a speed of 1,400 rpm, it is ideal for extraction and conveying tasks in workshops, production facilities, and filter systems. The fan runs reliably, is designed for durability, and comes from a renowned Nlodpfxoynmp Hs Ahzsb German manufacturer. Perfect for anyone looking for a solid and powerful solution for air and material transport.

Condition: used, Filter fitting, filter unit COMPAIR for compressor units Compressed air filter Type: CF 0087B ZP Factory No.: 3363006 / 05 / 005 Operating pressure: max. 16 bar Thread connection: G 1 1/2" Flow rate: approx. 8,5 m³/min Filter element- No: CE 0087B Nlsdpshalvdofx Ahzsb - Filter housing made of aluminum weight: 5 kg dimension L x W x H 125 x 110 x 420 mm good condition

Condition: used, High current EMC filter SCHAFFNER type FS 20364-1200-99 3 phases, 3 x AC ballast, mains connection module, mains filter Input voltage: 3 x 400 VAC Input frequency: 50 / 60 Hz. Rated current: 3 x 1200 A Dimension W x H x D: 135 x 260 x 235 mm weight: 27,5 Kg very good condition, from stock liquidation, unused Nlodpfxjd D Dh Ae Ahzsb 2 pieces available, price per piece

Condition: used, Year of construction: 2020, Overview The tangential filter was manufactured in 2020 by Spanish manufacturer Sefiltra. It can be visited anytime. The structure is made of AISI-304 stainless steel; it has four wheels and a handle for its wheels and a handle for its displacement. All pipes and accessories are made of AISI-316L, Stainless Steel AISI-316L. The system is operated from the SIEMENS KTP 900 color touch screen, which is located on the front of the electrical panel. Techn. Details Capacity: depending on beer type, recently 1,000 – 1,500 litres per hour Unitary filtration surface: 10 m² Two 0.5 micron hollow fiber membranes Dimensions (LxlXh): 1.800 x 950 x 2.300 mm Weight empty: 350 Kg Operating weight: 470 Kg Equipment 1 pc Centrifugal feed pump 3.0 kW 1 pc Recirculation centrifugal pump 4,0 kW 2 pc Diaphragm HF 6043 MF 05 (KDP3358) 1 pc Modulating valve 5 pcs Pneumatic valves 1 pc 100 L CIP tank 1 pc Angle filter 500 microns 3 pc Electromagnetic flowmeters 5 pc Pressure transmitters 1 pc Temperature transmitter 1 pc Level transmitter 1 pc Liquid detector 1 pc Electrical panel with Siemens S7-1200 programmable logic controller and touch screen Siemens 7" touch screen Nedpeqvvpaefx Ahzolb

Condition: used, Year of construction: 2021, Overview The tangential filter system was built in 2021 by the Spanish company sefiltra and used for the filtration of beer. The owner had purchased all the equipment to set up a microbrewery but then decided to shift the production of his beer to a bigger brewery, producing for him.  Techn. details  Filtration system is mounted on stainless steel frame with rollers  Control system: Siemens S7  4 filter cartridges  Recirculation pump CIP connection options Filters particles from 300 µm Nlodpfxel Hxnxe Ahzob

Condition: used, Year of construction: 2024, Overview The dynamic beer filtration system 1VDCF-5-5 was manufactured in 2024 by the German company BECA. The filtration system is used to filter beer. Techn. Data Whole Plant Output: 5 hl/h Filter surface area: 5 m² Condition: as new Weight empty: approx. 800kg (net) + 300 kg (el. cabinet) Dimensions (L x W x H): 2300mm x 1300mm x 2200mm Dimensions electrical cabinet: 1000mm x 800mm x 2000mm Energy requirement: 4kW Energy consumption: 0,7-1,0 kW/hl Temperature increase: 5°C per minute due to ceramic plates Operating pressure: 1-4,5 bar Size of the pores: 200nm Features: High quality beers immediately after start up Higher dry content of the filtered yeast Extremely low energy consumption Low maintenance effort Filtration at low pressure No additional tools or additives required Modular design to increase the capacity in future Integrated CIP system Nlodexchy Ujpfx Ahzsb

Condition: used, Year of construction: 2013, Overview  This diatomaceous earth filter was manufactured in 2013 by Spadoni (Italy) and later adapted by (Spain). The mobile filtration unit is equipped with an integrated pumping and control system for fine filtration with diatomaceous earth. It is on sale because the owner upgraded to a newer model. The filter is in good condition and available immediately. Technical data Capacity: Approx. 80 hL/h Filtration system: Diatomaceous earth Tank: Pressurized stainless steel Pump 1: OBL MHBN100PP, 100 l/h capacity, 10 bar max pressure Pump 2: EBARA 2CDX/E 120/30, stainless steel liquid transfer pump Valve system: Stainless steel, precise flow control Design: Mobile filtration unit with integrated control system Nodpfsxfcc Aox Ahzjlb

Condition: good (used), Year of construction: 1987, E.BACHILLER stainless steel nutsche filter dryer, 0.4 m². Year: 1987. Nlodpfx Ahey Hfx Eszsb Hydraulic power unit with 7.5 hp motor, 1410 rpm, 50 Hz, 220 V. No documentation available.

Condition: used, Imeca - ELIT ES8 pressure filter- Rotating trays Nlodpjyga Uyefx Ahzob - 8 m² trays

Condition: used, Year of construction: 2000, Workstation with extraction and filtration system, suitable for dust extraction during plastering work with an angle grinder or also for welding operations. Nsdpfjyay Rhex Ahzolb

Condition: good (used), Year of construction: 2005, machine/vehicle number: HSL 1500-8-12/8 GB, type of input current: AC, volume flow: 2,500 m³/h, filter area: 33 m², Dust filter herding with modular fan Technical data: Power consumption 1x15 kW option 2nd 15kw Filter is supplied with 1 side channel fan 2nd side channel fan is optional. Filter surface 33 m² Dust container capacity 40 litres Weight 660 kg Nljdjvz Az Ijpfx Ahzsb Suction connection 2x 160mm Operating volume flow: 2500 m³/h Operating mode: Continuous operation Cleaning: compressed air Compressed air connection must be available side channel fan: brand: Effepizeta Type: SCL K10-TS Power: 15kw Speed: 2908 rpm

Condition: ready for operation (used), Year of construction: 2019, Two Ivat filter towers for dust and smoke with temperature control and nanofilter are available. Air volume flow: 22000-25000m³/h, motor power: 18.5kW, max. separation efficiency: 99.95%, filter area: 120m², filter cartridges: 4, machine dimensions X/Y/Z: approx. 2000mm/1500mm/3000mm, weight: approx. 1200kg. Documentation available. An on-site inspection is possible. Njdpoyvuvlefx Ahzjlb

Condition: ready for operation (used), SMB Combisifter 10/32 + 32/60 2 fractions separates wood, plastic, foil and paper, wind sifting with filter system, 2 vibrating chutes, airlock, control cabinet with complete control system, mobile with hook trolley, self-erecting, compressor for filter cleaning, 1000 operating hours. Nlsdpfx Ahop Aunljzsb

Condition: used, Year of construction: 2023, Used system Year of manufacture: 2023 Condition: As new, system has only a few operating hours Equipment and technical specifications: - Stationary clean air filter system ECO JET DUO 6 XL ZRS 2 x 7.5 kW - For extraction of wood dust and wood chips - Fan: 2 x 7.5 kW - Airflow rate: 10,000 m³/h at - Negative pressure: 2,700 Pa (total) / 2,200 Pa (static) - Filters: 80 pcs à 2.50 m - BIA category M, electrically conductive Nedpfx Aoyk I U Aehzolb - Filter area: 77.6 m² - Filter surface load: 129 m³/(m²x h) - Filter cleaning: AL-KO OPTI JET® - Pressure relief panels: 0.84 m² (bursting discs) - Lower section with discharge chute and rotary valve Dry discharge with C-coupling Comprising: - ECO JET DUO 6 UPPER PART, 2 x 7.5 kW: Clean air filter system; 2 x 7.5 kW fan; AL-KO OPTI-JET filter cleaning; Incl. pressure relief panels and dry discharge with C-coupling; without filters and control; Incl. pressure sensors - ECO JET DUO 6 ZWR XL - 1100 MM: Intermediate ring for expansion or unit height increase with 2 inlet connections for suction nozzles - Base frame with discharge chute and integrated rotary valve 960/1 FG: For disposal of chips via on-site transport fan into existing silo or similar Transport pipe DN 200 mm, approx. 1,260 mm long under rotary valve, connection to transport pipe to be provided by buyer Rotary valve certified according to ATEX Directive 94/9/EC Technical data ZRS 960/1FG: CE 0588 Ex II 1D/- (Unit for indoor/outdoor); EX D (protection system); FSA 11 ATEX 1614X Motor output: 0.18 kW / 0.78 A 3 Ph / 400 V / 50 Hz Protection class / mounting: IP 54 / B3 Insulation class: F Speed: 41 rpm Discharge capacity*: 15,744 l/h* Number of cells: 7 pcs Inlet/outlet cross-section: 960 x 250 mm / 960 x 208 mm Dimensions (W x D x H): 1,100 x 605 x 330 mm Temperature range: up to 50°C *depending on material - FILTER & SUPPORT CAGE 2.5 / CAT M EL WHITE FILTER ECO JET DUO 6: 80 pcs required Filter BIA category 'M' – electrically conductive; 2.50 m long, incl. support cages; 77.6 m² filter area - Inlet nozzle 400 mm: with backdraft damper in rectangular duct - ECO JET backdraft damper 910x346x500 - Control cabinet – AL-KO Control System: BASIC CONTROL ACS II WITH TOUCHSCREEN DISPLAY: Basic unit for cascade control of 2 fans via frequency inverter (FU) up to max. 37 kW; corresponding performance module and controls as well as the frequency inverter are included in the basic unit; the FU is installed in the control cabinet Cascade control with FU handover: Fan 1 operates on the frequency inverter; when threshold is reached, switches to mains operation; Fan 2 takes over FU and regulates as needed; Basic functions: Control voltage 24 V Touchscreen display, ST 1200 control, Sitop Power supply, collective fault warning Display of fault message as plain text on display and collective fault indicator on the door Manual discharge start via display button Start filter cleaning via differential pressure Manual filter cleaning start via button Post-cleaning Fire monitoring

Condition: used, Table dimensions 1250 x 750 mm Nljdpfjxcp Nwex Ahzsb

Year of construction: 2003, condition: excellent (used), EMC Mains filter Make Hitachi for frequency inverter Nedpogrhimofx Ahzslb Filter for FFFB - SJ300- 750/900 HF,L 300,100 HF further data,see picture 3 x 220 Ampere length 1000 mm width 300 mm height 190 mm

Condition: as good as new (ex-display), FN 350 Single-phase EMC filter for motor drives and inverters Nedpfx Ahscdzyrezolb compact filter solution for single phase inverter applications Touch-proof connection terminal enables compliance with EN 55011/14/22 compliant with ICE 60950 Frequency : dc -400 Hz Leakage current 4.9 to 11 mA Sensing power standard high 8 pieces available

Condition: good (used), Erlab Captair Filtair 936 Fume Hood Erlab's exhaustless, filtering chemical fume hoods offer the world's most powerful filtration, guaranteeing safety and performance. A system with countless advantages, providing seamless protection throughout the laboratory and beyond. Equipped with SMART technology, an intuitive communication platform that monitors all critical fume hood performance criteria and ensures your safety at all times. Advantages Complete user protection Filtration safety: All captair filtair fume hood models comply with AFNOR NFX 15-21 1 Class II. High retention capacity for chemical vapors in the work area, guaranteed by controlled air velocity at the front and compliance with pollutant retention standards (XPX 15203, BS 7258, DIN 12927). A sampling valve for the exhaust air allows the user to check filter saturation at any time using colorimetric test tubes (not included). The acrylic front and door protect against potential chemical splashes (fire classification, NF P92.507 standard). Ergonomics and comfort Nsdpfxoyk Dq Ho Ahzslb Angled front panel provides better visibility of the work area. Thoughtfully designed hand openings give the user ample freedom of movement within the work area. Cable glands for routing electrical or power cables into the work area. Optimized working position. Very low noise level (49 dBA). Transparent walls for a clear view of work processes within the work area. Easy installation / Energy savings. No exhaust duct required; a standard electrical outlet is sufficient. Direct installation in your laboratory or on an optional mobicap rolling table. Energy savings through the recycling of purified air from the unit without the consumption of heated or cooled air. Erlab/Captair fume hood Filtair 936 Connection values: 230 V, 50 Hz, 94 W Safety class 2 Air flow rate: 200 m³/h Front air inlet velocity: 0.51 m/s Filter type: S Filter 960-961 Safety class 3 Pollutant retention class: B 2 fans Analog flow meter Noise level: approx. 51 dB(A) External dimensions: 110 x 84 x 74 cm Internal dimensions: 87 x 82 x 73 cm Working chamber volume: 0.432 m³ Two access openings in the front panel Available Filters: MF and VF CE marked. Find more items – new and used – in our shop! International shipping costs on request!

Condition: new, Year of construction: 2026, functionality: fully functional, Suitable for cleaning coolant oil used in carbide grinding. Our solution with an ultra-fine filtration system for grinding oil optimizes your tool production at the highest level. Nlodpfjy Anqisx Ahzsb In today’s demanding manufacturing environment, the quality of your products is critical. Our MANTA ultra-fine filtration systems clean your grinding oil at a microscopic level to maximize the performance and service life of your precision tools. Available in a wide range of configurations.