Used Grease for sale (577)

Condition: used, Lumsden 93 ML Vertical Spindle Rotary Surface Grinder, fitted with 60 inch dia magnetic chuck. Available for immediate supply. Full rebuild, all new Bearings, feed unit rebuilt, new main motor, drive belts, new H/D coolant tray, new panel inc electronic mag unit, Pilz 2 Channel safety switch circuit, door interlocks with motor rundown sensor incorporated, new oil/grease pipework. Dkjdpfozlkd Uox Aggjt

Condition: excellent (used), Year of construction: 2010, operating hours: 70,257 h, functionality: fully functional, overall weight: 645 kg, input voltage: 415 V, We have for sale a 2010 FANUC M-710 iC 50s robot with a 30iA controller in very good condition. please see the photos for run times. just been greased and tested Dkjdpezxrqcsfx Agget

Condition: ready for operation (used), Vogel SKF piston pump KFG10-5W2-S1-486 grease/NLG12, max. 90-264 VAC 47-440Hz, 120-370 VDC, serial number: filled! - used, in good condition, 100% functional, delivery as per photos. Dsdpfx Agszzipujgokt

Year of construction: 2016, condition: excellent (used), ALP Greaser Rotary greaser Stainless, rotary greasing machine previously used for greasing tins and trays, slat conveyor 1400mm x 300mm, with top mounted rotary greasing head, comes with recirculation pump and tank, mobile, 3Ph Dodpfx Asy Ax S Djggokt

Condition: like new (used), Year of construction: 2006, operating hours: 9,039 h, functionality: fully functional, total height: 2,992 mm, total length: 3,980 mm, total width: 2,580 mm, overall weight: 8,500 kg, operating hours of spindle: 671 h, number of slots in tool magazine: 48, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, We offer this as new Quaser MV154 APC/P vertical machining center, year of construction 2006. The machine has 9039 power-on hours, but only 671 spindle-hours, this has been confirmed in the parameters aswell. The machine has seen very little usage. When i bought this machine the linear guides for the X & Y axis was worn out as they had not been lubricated properly and with the incorrect grease. These have been swapped for brand new ones, aswell as most of the air and coolant hoses. All the lubricating lines for the X & Y guides and ballscrews have also been renewed. There are some tools in the 48 tool magazine aswell. It also has a 3D Taster. The chip conveyor also has new bearings and seals. Two Hilma vices could also come with the machine. I have done a ballbar test and checked the machine to be in great working order. The size of the machine also makes transportation easy, as it will fit inside a standard curtain semitrailer. Djdpfezxz Dfjx Aggjkt If you have any questions or need more information, feel free to send us a message or give us a call.

Year of construction: 2022, operating hours: 4,320 h, condition: used, functionality: fully functional, machine/vehicle number: 3175555, This is a hood-type commercial dishwasher manufactured by Winterhalter, model PT-L Energy Plus. The machine is offered with an infeed and outfeed table and can be positioned either straight or in a corner. In our in-house workshop, the machine has undergone a thorough inspection and is, of course, fully functional. It was manufactured in 2022 and first put into operation in 04/2024 (see photo sequence). The hood-type dishwasher has completed only 6,401 wash cycles and operated for 4,320 hours. You will receive an invoice with VAT shown. Technical data: W x D x H: approx. 635 x 750 x 2175 mm (with hood open: 610 x 750 x 2175 mm) Power connection: V: 400 / kW: 13.2 / Hz: 50 Boiler heating: 10.8 kW Tank heating: 2.5 kW Tank capacity: 35 l Tank temperature: +45°C to +69°C Final rinse temperature: +50°C to +86°C Water inlet: 371" M Weight: 163 kg Serial number: 3175555 Year of manufacture: 2022 Condition: Used, inspected, fully functional Winterhalter PT series: High-quality and user-friendly control system: Color touchscreen One-button operation with self-explanatory icons Elliptical wash fields: High-quality wash fields at the top and bottom cannot become clogged Caustic filter: With turbidity sensor: filters all dirt particles no need to change the wash water during the workday Automatic regeneration Wash water is always clean EnergyPlus: In the PT series, the EnergyPlus exhaust air heat recovery system is available as an option but is already integrated in this machine. In contrast to the standard EnergyLight waste water heat recovery system, EnergyPlus uses an additional exhaust air heat exchanger in addition to a more powerful waste water heat exchanger. It utilizes the energy of the warm water vapor inside the machine to preheat the cold incoming water. When the machine is opened, hardly any warm, humid water vapor escapes into the room. And up to 15% of energy costs are saved per wash cycle. The grease filter can be easily and quickly removed for cleaning. Integrated waste water heat recovery Automatically heats the wash water to +30°C before the program starts shortens the heating time and saves electricity Integrated exhaust air heat exchanger: cold incoming water is heated by the warm water vapor in the machine Up to 15% energy cost savings per wash cycle Further information: Rack capacity: 44 per hour Rack size: 500 x 500 mm / 600 x 500 mm Outer material: Stainless steel Inner material: Stainless steel Loading height: 440 mm Dksdpfxszyaq Tj Aggst Easy to use: Hood opens easily Energy-saving: Hood is double-walled Interior is deep-drawn 3 standard programs 7 special programs: ECO program / Short program (rack capacity increases to 72 racks/hour) Whisper program Intensive program Self-cleaning program Descaling program Water consumption / wash cycle: approx. 2.4 liters Shipping: Delivery or self-collection by arrangement Worldwide shipping on request Shipping to islands or mountain stations only by arrangement Subject to changes and errors. Do you have any questions, would you like a consultation, or would you like to see something on-site? You can reach us by phone during our opening hours: Monday - Friday 09:00 - 13:00 and 14:00 - 17:00. The sale is exclusively subject to our general terms and conditions (GTC).

Condition: refurbished (used), Year of construction: 2023, machine/vehicle number: R-00679, load capacity: 25 kg, arm reach: 1,831 mm, controller manufacturer: R-30iB Plus A-size, teach pendant manufacturer: A05B-2256-C101#EGN, Refurbished FANUC M-20iD/25 manufactured in 2023.01. The robot comes with an R-30iB Plus A-size controller including iPendant.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: FANUC Model: M-20iD/25 Model Number: A05B-1228-B202 Year of Manufacture Robot: 2023.01 Warranty term (months): 12   Payload (kg): 25 Dkjdpfszy Uckjx Aggst Reach (mm): 1831 Repeatability (mm): ± 0.02 Controlled Axes: 6-axis Installation Type: Floor, Upside-down, Angle Mount Weight (kg): 250   Controller: R-30iB Plus A-size Year of Manufacture Cabinet: 2023.01 RCC Length (m): 7   Teach Pendant: A05B-2256-C101#EGN Teach Pendant Cable Length (m): 10  

Condition: refurbished (used), Year of construction: 2021, machine/vehicle number: R-00644, load capacity: 165 kg, arm reach: 2,655 mm, controller manufacturer: R-30iB Plus A-size, teach pendant manufacturer: A05B-2256-C101#EGN, Refurbished FANUC R-2000iC/165F manufactured in 2021.12. The robot comes with an R-30iB Plus A-size controller including iPendant.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: FANUC  Model: R-2000iC/165F Model Number: A05B-1333-B201 Year of Manufacture Robot: 2021.12 Warranty term (months): 12   Dodpfx Agszy Uc Djgjkt Payload (kg): 165 Reach (mm): 2655 Repeatability (mm): ± 0.05 Controlled Axes: 6-axis Installation Type: Floor Mount Weight (kg): 1090   Controller: R-30iB Plus A-size Year of Manufacture Cabinet: 2021.12 RCC Length (m): 14   Teach Pendant: A05B-2256-C101#EGN Teach Pendant Cable Length (m): 10

Condition: good (used), Year of construction: 2012, functionality: fully functional, load capacity: 165 kg, controller model: 30iA, teach pendant manufacturer: Fanuc, input voltage: 400 V, type of input current: three-phase, Used but good condition. Repeatability test done, greased, mechanical and RAM batteries changed. We have cleaned it up but it did come from a spotweld environment so has obvious signs of use. Dkjdpfxsuqa Tio Aggst

Condition: refurbished (used), Year of construction: 2021, machine/vehicle number: R-00656, load capacity: 7 kg, arm reach: 717 mm, controller manufacturer: R-30iB Mate Plus, teach pendant manufacturer: A05B-2256-C101#EGN, Refurbished FANUC LR Mate 200iD manufactured in 2021.01. The robot comes with an R-30iB Mate Plus controller including iPendant.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: FANUC Model: LR Mate 200iD Dodpfezy Ucqox Aggokt Model Number: A05B-1142-B202 Year of Manufacture Robot: 2021.01 Warranty term (months): 12   Payload (kg): 7 Reach (mm): 717 Repeatability (mm): ± 0.018 Controlled Axes: 6-axis Installation Type: Floor, Upside-down, Wall, Angle Mount Weight (kg): 25   Controller: R-30iB Mate Plus Year of Manufacture Cabinet: 2021.01 RCC Length (m): 7   Teach Pendant: A05B-2256-C101#EGN Teach Pendant Cable Length (m): 10

Condition: excellent (used), Year of construction: 2011, machine/vehicle number: 506925, functionality: fully functional, operating hours: 261 h, power: 5.5 kW (7.48 HP), planing width: 630 mm, tool diameter: 125 mm, number of blades: 4, rotational speed (max.): 5,000 rpm, overall weight: 1,260 kg, Offering a used MARTIN thickness planer, model T45. Sale due to restructuring of the company. Dodpfx Agszwpvajgjkt General Technical Specifications: Planing width: 630 mm Maximum planing depth: 12 mm Planing height: 2.8 - 300 mm Minimum workpiece length: 270 mm Weight: approx. 1,200 kg Table length: 1260 mm Speed: 5000 rpm Thickness table extension 630 x 450 mm, foldable Year of manufacture: 2011 5.5 kW (7.5 hp); maximum planing width 630 mm The machine provides first-class results in planing operations. Operation: 1-axis control for planing dimensions, maximum 99 values can be stored, Button for manual quick and fine adjustment of the planing thickness according to the digital display, Push buttons for starting and stopping the cutterhead, Cutterhead: TERSA full-steel cutterhead Z4 D=125 mm; including locking mechanism for easy cutter replacement Groove for accommodating planing cutters. Thickness table: Electric thickness table adjustment with fine adjustment, feed rate 10 mm/s, mounted on 4 support spindles, preventing tipping, table surface finely planed. Feed: 2 speeds, 6 / 12 m/min, electrically selectable even during planing, large rubber feed rollers D=85 mm to compensate for varying wood thicknesses, rubber rollers are material-friendly and self-cleaning, easy roller replacement; articulated pressure bar at the infeed. Extraction: High-swiveling, split hood with chip extraction connection D=160 mm, Maintenance: Central lubrication strip for oil lubrication points; lubrication of bearings / cutterhead via grease nipples. The machine is still connected and can be tested. Price is quoted plus VAT.

Condition: refurbished (used), Year of construction: 2026, - The Trepko XPG 40 is a high-performance butter packing machine designed for automated packing of butter into various sizes. Known for its robust construction and outstanding reliability, this machine features advanced technology to ensure precise filling and wrapping. - Key attributes include: - Versatility: Suitable for different butter formats and packaging styles. - Efficiency: High-speed operation reduces production time while maintaining top quality. - User-Friendly controls: Easy to operate, allowing for quick adjustments and setup. - Hygienic Design: Constructed with easy-to-clean materials, adhering to food safety standards. - Durability: Built to withstand the demands of a busy production environment. - The Trepko XPG 40 is a trusted solution for manufacturers looking to enhance their butter packaging processes, ensuring both efficiency and quality. Format: 100 x75 x 30 mm Butter Infeed: Twin Screw Augers Dodezwli Aepfx Aggjkt Packaging Material: Foil, Parchment Paper, Grease Proof Capacity: up to 90 packs/min Weight: 1600 kg Power: 2.2 kW Available: Immediately Condition Details: Fully overhauled and ready to be used Not used since renovation

Condition: refurbished (used), Year of construction: 2016, machine/vehicle number: R-00653, load capacity: 125 kg, arm reach: 3,100 mm, controller manufacturer: R-30iB B-Size, teach pendant manufacturer: A05B-2255-C101#EGN, Refurbished FANUC R-2000iC/125L manufactured in 2016.11. The robot comes with an R-30iB B-Size controller including iPendant.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: FANUC Model: R-2000iC/125L Model Number: A05B-1333-B261 Year of Manufacture Robot: 2016.11 Warranty term (months): 12   Payload (kg): 125 Reach (mm): 3100 Dkjdpfx Agszy Ucdsget Repeatability (mm): ± 0.05 Controlled Axes: 6-axis Installation Type: Floor Mount Weight (kg): 1115   Controller: R-30iB B-Size Year of Manufacture Cabinet: 2016.10 RCC Length (m): 7   Teach Pendant: A05B-2255-C101#EGN Teach Pendant Cable Length (m): 10

Condition: refurbished (used), Year of construction: 2015, machine/vehicle number: R-00663, load capacity: 210 kg, arm reach: 2,655 mm, controller manufacturer: R-30iB B-Size, teach pendant manufacturer: A05B-2255-C101#EGN, Refurbished FANUC R-2000iB/210F manufactured in 2015.10. The robot comes with an R-30iB B-Size controller including iPendant.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: FANUC Model: R-2000iB/210F Model Number: A05B-1329-B205 Year of Manufacture Robot: 2015.10 Warranty term (months): 12   Payload (kg): 210 Reach (mm): 2655 Repeatability (mm): ± 0.3 Controlled Axes: 6-axis Installation Type: Floor Mount Weight (kg): 1240   Controller: R-30iB B-Size Dedpfezy Ub Hox Aggjkt Year of Manufacture Cabinet: 2015.10 RCC Length (m): 14   Teach Pendant: A05B-2255-C101#EGN Teach Pendant Cable Length (m): 10  

Year of construction: 2023, operating hours: 1,008 h, condition: ready for operation (used), Machine tool manufactured in 2023. This ECOKRAFT LP 22 features a power rating of 22.5 kW and a material bunker capacity of 4 m³. It includes a drum screen with dimensions of Ø 300 mm x Length 1,200 mm and a conveyor belt with a length of 3,600 mm. If you are looking to get high-quality processing capabilities, consider the ECOKRAFT LP 22 machine we have for sale. Contact us for further details. - Machine Type: Pellet Plant / Pellet Press Line- Power Rating (Cutting Mill): 22.5 kW- Material Bunker Capacity: 4 m³ (with discharge)- Material Container Automatic Operation Capacity: 4 m³ (discharge via conveyor belt)- Operating Hours (from HMI readout):- Power On Time: 3795 h- Total Press Run Time: 1008 h- Current Press Run Time: 1008 h- Removal Conveyor: 1158 h- Screening System: 1158 h- Water Pump: 609 h- Bunker Conveyor: 259 h- Bunker Discharge: 230 h- Bunker Agitator: 201 h- Cross Conveyor: 0 h- Drum Screen Dimensions: Ø 300 mm x Length 1,200 mm- Drum Screen Discharge Height: Max. 1,800 mm (variable height adjustment, side filling right/left)- Conveyor Belt Specifications: Length 3,600 mm, Discharge Height 2,600 mm, Belt Width 150 mm, Number of Cleats: 49, Motor Speed 46 rpm- Big-Bag Frame Vario 1.0: Suitable for size 95x95x100 cm (1.0 m³)- Big-Bag Frame Vario 1.5: Suitable for size 95x95x150 cm (1.5 m³)- Optional Equipment & Features:- Pellet Press LP22- Load-dependent feed control- Rotary valve- Frost-proof control panel with touchscreen interface- Remote maintenance and fault analysis module- SMS module- Temperature monitoring and control for press room- Manual potentiometer for material flow regulation- Pressol pneumatic grease system (for 18 kg bucket)- Control cabinet with VFD for LP22 connection- Cable set for automatic operation- Level sensor Dkodpfx Aszza Axjggot

Year of construction: 2017, condition: used, functionality: fully functional, machine/vehicle number: E61SI17032579878, SAVE ON LIQUIDITY – LEASING & HIRE PURCHASE OPTIONS AVAILABLE!! This is an SCC 61 WE combination oven/steamer in an electric model, from the premium manufacturer Rational, manufactured in 2017. The combination oven/steamer is a unit from the latest SCC series, featuring triple-pane glass and LED lighting. The unit will be fully refurbished in our in-house workshop, and the combination oven/steamer is fully functional. Available from week 36. The base frame shown in the picture is not included in the offer, but can be purchased as an option. The list price is €9,400 net. Dksdpfx Agszyqy Ssgot You will receive an invoice with VAT shown. Service: We will be happy to assist you in arranging a certified Rational customer service technician. Are you looking for a specific Rational model? Ask us, we have access to a wide range of used and new equipment. We will be happy to advise you on all models, whether SCC, CM, CMP, VCC, iVario, iCombi Classic and Pro. Our used equipment service for you: 6-month warranty on all electrical parts, limited to the replacement of defective parts, excluding installation and removal costs. High-quality brand-name equipment at fair prices. Professional refurbishment/inspection & expert cleaning. Tested & fully functional – or your money back. Flexible shipping or self-collection options. Competent advice – before and after purchase. Provision of operating instructions, connection diagrams & spare parts. Inspection according to DGUV V3. Technical data: W x D x H: approx. 847 x 776 x 782 mm Minimum door opening dimensions for transport W x H: 845x850mm Power connection: V: 400 / kW: 11 / Hz: 50/60 Capacity: 6 x 1/1GN Weight: approx. 110 kg Serial number: E61SI17032579878 Year of manufacture: 2017 Condition: used, inspected, fully functional Additional information: In combination oven/steamer mode, 3 operating modes are available: steam (30°C to 130 °C), hot air (30°C to 300°C) and combination (30°C to 300°C) Care Control – self-cleaning system Core temperature sensor Handheld spray nozzle with automatic retraction 8.5-inch color display and touchscreen 5 fan speeds programmable integrated, maintenance-free grease separation system Automatic start time selection 7 cleaning levels for unattended cleaning – even overnight Steam injection adjustable in 3 stages – from 30°C to 260 °C 5 programmable fermentation stages USB interface Seamless, tub-shaped hygienic cooking chamber, rounded corners Halogen cooking chamber lighting Shipping: Delivery or self-collection by arrangement Worldwide shipping on request Shipping to islands or mountain stations only by arrangement Subject to changes and errors. Do you have any questions, would you like to receive advice or would you like to view something on site? You can reach us by telephone during our opening hours: Monday to Friday 09:00 - 13:00 and 14:00 - 17:00. The sale is made exclusively subject to our general terms and conditions (GTC).

Year of construction: 2017, condition: used, functionality: fully functional, machine/vehicle number: E61SI17032579879, This is an SCC 61 WE combination steam oven in an electric version, manufactured by the premium brand Rational, built in 2017. The unit will be completely overhauled in our in-house workshop, and the combination steam oven is fully functional. The base shown in the picture is not included in the offer but can be purchased as an option. AVAILABLE FROM WEEK 35!! The recommended retail price is €9,400 net. You will receive an invoice with VAT shown. Service: We will gladly assist you in arranging a certified Rational service technician. Are you looking for a specific Rational equipment type? Ask us; we have access to a large range of used and new equipment. Dksdpfszw H Sljx Aggst We will gladly advise you on all equipment types, whether SCC, CM, CMP, VCC, iVario, iCombi Classic, or Pro. Our used equipment service for you: 6 months warranty on all electrical parts, limited to the replacement of defective parts, excluding installation and removal costs. High-quality brand-name equipment at fair prices. Professional overhaul / inspection & expert cleaning. Tested & fully functional. Flexible shipping or self-collection options. Competent advice – before and after purchase. Provision of operating manuals, connection diagrams & spare parts. Inspection according to DGUV V3. This combination steam oven offers space for 5x 400x600mm trays. In automatic mode, the unit automatically detects the ideal cooking path, the size of the food, the quantity loaded, and the product-specific requirements for 7 applications (meat, fish, poultry, side dishes, egg dishes, baked goods, and finishing). Technical data: W x D x H: approx. 847 x 776 x 782 mm Minimum door opening dimensions for transport W x H: 845x850mm Power connection: V: 400 / kW: 11 / Hz: 50/60 Capacity: 6x 1/1GN Weight: approx. 110 kg Serial number: E61SI17032579879 Year of manufacture: 2017 Condition: used, completely overhauled, fully functional Further details: In combination steam oven mode, 3 operating modes are available: steam (30°C to 130°C), hot air (30°C to 300°C), and combination (30°C to 300°C). Care Control – self-cleaning system Core temperature sensor Handheld spray nozzle with automatic retraction 8.5-inch color display and touchscreen 5 fan speeds programmable Integrated, maintenance-free grease separation system Automatic start time selection 7 cleaning levels for unattended cleaning – even overnight Moistening adjustable in 3 levels – from 30°C to 260°C 5 programmable proofing levels USB interface Joint-free, tub-shaped hygienic cooking chamber, rounded corners Halogen cooking chamber lighting Shipping: Delivery or self-collection by arrangement Worldwide shipping on request Shipping to islands or mountain stations only by arrangement Subject to changes and errors. Do you have any questions, would you like a consultation, or would you like to see something on-site? You can reach us by telephone during our opening hours: Monday to Friday 9:00 a.m. to 1:00 p.m. and 2:00 p.m. to 5:00 p.m. The sale is made exclusively subject to our general terms and conditions (GTC).

Year of construction: 2024, condition: used, functionality: fully functional, The iCombi Classic is the latest combination steamer from RATIONAL. The iCombi Classic 20-1/1E model is a true all-rounder and will quickly become an indispensable helper in your kitchen. It replaces numerous conventional cooking appliances and is robust, powerful, efficient, and high-performing. The appliance offers space for 20x1/1 GN containers. The combination steamer has been fully refurbished in our in-house workshop and is therefore fully functional and free of defects. It comes with a 6-month warranty on all electrical components. These are sample photos of an identical model series in comparable used condition; actual photos will follow shortly. Request your best price. The MSRP is €21,940 net. The appliance is available from approximately week 38. You will receive an invoice with VAT shown. Our equipment service for you: •6-month warranty on electrical parts, limited to the replacement of defective parts, excluding installation and removal costs •High-quality branded equipment at fair prices •Professional and competent advice – before and after the purchase •Free shipping within Germany (excluding islands/mountain stations) •Provision of operating instructions, connection diagrams & spare parts •Trade-in of your combination steamer from model year 2004 onwards •Complete range of accessories at attractive prices Condition: Used, inspected, and fully functional Technical data: •W x D x H: 877 x 913 x 1872 mm •Power connection: V: 400 / Hz: 50-60 •Electrical power: kW: 37.2 •Weight: 246 kg •Capacity: 20x1/1 GN •Serial number: E21MJ24083162984 Dkodpfezy Uvwsx Agget •Year of manufacture: 2024 Special features: •ClimaPlus – the active climate management system: humidity in the cooking chamber is continuously measured and adjusted for optimal cooking quality with low energy consumption / humidity is adjustable in 10% steps for precise manual cooking •3 operating modes: steam, hot air, combination – automatic cleaning and maintenance system for cooking chamber and steam generator Additional information: •Control knob for operating modes, temperature, core temperature, and time settings •Acoustic and visual signal for necessary user interventions •4.3-inch TFT color display with softkeys •HACCP data memory and output via USB •Temperature display adjustable in C° or °F, display of target and actual values •Active climate management in the cooking chamber ClimaPlus •100 individually adjustable cooking programs with up to 12 steps each •Program steps can be adjusted during operation •High-performance fresh steam generator for optimal steam performance even below 100°C •5 programmable fan speeds •LED lighting with strong, neutral light in the cooking chamber •Integrated, maintenance-free grease separation system without additional grease filter •Cool-down function: rapid cooling of the cooking chamber •Delta-T cooking for particularly gentle preparation •Automatic adjustment to the installation location •Removable, pivoting hanging racks •USB interface for transferring settings to other cooking systems •Material inside and outside made of stainless steel DIN 1.4301 •Core temperature probe with 1-point measurement integrated •Protected against spray and jet water IPX5 Shipping: •Delivery or self-collection by arrangement •Worldwide shipping on request •Shipping to islands or mountain stations only by arrangement Subject to changes and errors.

Year of construction: 2016, operating hours: 15,027 h, condition: used, functionality: fully functional, machine/vehicle number: E21SH16032509528, This is a combination steamer, model SCC 201 WE, in an electric version, from the premium manufacturer Rational, manufactured in 2016. It has only 15,027 operating hours! The combination steamer is located in our in-house workshop and will undergo a thorough inspection. It will be sold with a 6-month warranty. The list price is €21,940 net. You will receive an invoice with VAT shown. Service: We will gladly assist you in arranging a certified Rational service technician throughout Germany. Are you looking for a specific Rational appliance type? Ask us, we have access to an extensive range of used and new equipment. We will gladly advise you on all appliance types, whether SCC, CM, CMP, VCC, iVario, iCombi Classic and Pro. Our used equipment service for you: * 6-month warranty on all electrical parts, limited to the replacement of defective parts, excluding installation and removal costs. * High-quality branded appliances at fair prices. * Professional overhaul / inspection & expert cleaning. * Tested & fully functional - or your money back. Dedpfszd Ahiex Aggokt * Flexible shipping or self-collection options. * Competent advice - before and after purchase. * Provision of operating instructions, wiring diagrams & spare parts. * Inspection according to DGUV V3 standard. This combination steamer offers space for 20 x 1/1 GN containers. In automatic mode, the appliance automatically recognizes the ideal cooking process for 7 applications (meat, fish, poultry, side dishes, egg dishes, baked goods, and finishing), the size of the food, the quantity loaded, and the product-specific requirements. Technical data: * W x D x H: approx. 879 x 791 x 1782 mm * Minimum door opening dimensions for transport WxH: 925x1900mm * Power connection: V: 400 / kW: 37.0 / Hz: 50/60 * Weight: approx. 268 kg * Serial number: E21SH16032509528 * Year of manufacture: 2016 * Capacity: 20 x 1/1 GN or 40 x 1/2 GN * Longitudinal insertion: 1/1, 1/2, 2/3, 1/3, 2/8 GN * Meals per day: 150-300 Condition: used, inspected, fully functional Further details: * In combination steamer mode, 3 operating modes are available: steam (30°C to 130°C), hot air (30°C to 300°C), and combination (30°C to 300°C). * Core temperature sensor * Integrated energy optimization * Care Control - self-cleaning * Handheld spray with automatic retraction * 8.5-inch color display and touchscreen * 5 fan speeds programmable * Integrated, maintenance-free grease separation system * Automatic start time preselection * 7 cleaning levels for unattended cleaning - even overnight * Humidification adjustable in 3 levels - from 30°C to 260°C * 5 programmable fermentation levels * USB interface * Joint-free, tub-shaped hygienic cooking chamber, rounded corners * Halogen cooking chamber lighting Shipping: * Delivery or self-collection by arrangement. * Worldwide shipping on request. * Shipping to islands or mountain stations only by agreement. Subject to changes and errors.

Condition: refurbished (used), Year of construction: 2011, machine/vehicle number: R-00628, load capacity: 250 kg, arm reach: 2,655 mm, controller manufacturer: R-30iA B-Size, teach pendant manufacturer: A05B-2518-C202#EGN, Refurbished FANUC R-2000iB/250F manufactured in 2011.07. The robot comes with an R-30iA B-Size controller including iPendant.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: FANUC Model: R-2000iB/250F Model Number: A05B-1329-B215 Year of Manufacture Robot: 2011.07 Warranty term (months): 12   Payload (kg): 250 Reach (mm): 2655 Repeatability (mm): ± 0.3 Dkedezy Udhopfx Aggst Controlled Axes: 6-axis Installation Type: Floor Mount Weight (kg): 1270   Controller: R-30iA B-Size Year of Manufacture Cabinet: 2011.07 RCC Length (m): 14   Teach Pendant: A05B-2518-C202#EGN Teach Pendant Cable Length (m): 10  

Year of construction: 2017, condition: used, Used machine Year of manufacture: 2017 Condition: Well-maintained Equipment: Gantry milling machine High-Z S-1400T/105 (Rev. 1.5 - Facelift 2016) with ball screws Travel: 1400 x 1050 x 110 mm (X/Y/Z) Machine control Zero-3 (Rev. 1.3) for High-Z series, 5-channel, 110 - 240 Volt, 50/60 Hz Milling kit for High-Z S-1350 or S-1400T/105, additional stabilization of the Z-axis when machining very hard materials Energy arm for S-1350 and S-1400/105 Cable harness for clean routing of cables and hoses from milling motor, spray mist cooling, etc. T-slot plate on base frame for High-Z S-1400T/105 - 1790x1160mm (NL2016) 1790 x 1160 x 76mm T-slot keys, 8 pcs with bridge, M6 - 10 pcs. incl. screws M6x25 6 pcs. clamping bars 50x20x10mm M6 Base frame for combination with enclosure for S-1400T/105 - 1790x1450x900mm (NL2016) SET - Suhner milling motor UAD 30-RF / 1050W - 3,500-30,000 RPM, 230 Volt, 50/60Hz incl. 8mm and 10mm collets Collet set for Kress and Suhner (UAx-30RF) milling motors, 3.00mm / 3.175mm (1/8") / 6.00mm Milling cutter set, 10-piece (shaft 3.175mm) Wood milling cutter: 2x1mm / 2x2mm / 1x3mm Aluminum/plastic: 2x1mm / 2x2mm / 1x3mm Extraction nozzle made of aluminum for Kress or Suhner milling spindle Hose nozzle with Ø 32 and 38mm Dimensions 135x60x30mm Tangential module EOT-3, stroke 3mm Oscillating with 3mm stroke Connection cable for EOT-3 / TCM-4 for High-Z series - 5m Tungsten carbide blade type E12 - cutting edge 12mm Tungsten carbide blade type E18 - cutting edge 13.5mm EcoCam EC-4 continuous cutting pad 4mm / roll width 2m Always delivered in 2m roll width!!! 1m2 = 2 x 0.5m Tangential grooving module TCT-1 Tool holder type KR for grooving module TCT-1 for ball-bearing grooving wheels Grooving wheel B14 Grooving wheel B24 Side channel compressor Rubin 220, 1.5KW/50Hz vacuum pump incl. 3m spiral hose 40mm 230V/50Hz / 9.5A / 190mbar -190mbar / 71dB(A) Maintenance set High-Z series Grease gun + grease cartridge 400g + 100ml oil Network switch 5-port 10/100 Mbit/s + LAN cable 1m, 5x 10/100Mbps-RJ45 ports with auto negotiation Dodpfx Agezu T Smegekt Kinetic-NC control software incl. CNC-Pod (LAN), network cable + USB charging cable Vacuum table VT-150100 - 1500x1000mm incl. through-milling mat and connecting hoses Location: NRW Availability: Short-term Sold on behalf of a customer! Technical data without guarantee!

Condition: used, Year of construction: 2012, CNC Machining Center Manufacturer: Weeke Type: PROFI BHP 210/56/22/R Year of Manufacture: 2012 Technical Data - Work table length: 5600 mm - Work table width: 2250 mm - Max. workpiece thickness: 135 mm Vector speed - X/Y: 105 m/min - Z: 20 m/min Special vacuum field arrangement - 5600x2250 - 3000x1525 - 2500x1250 - 1525x1525 2x Central vacuum frame for max. 3 pumps 6 Vacuum pumps 300/360 m3/h, 50 /60 Hz Automatic tool changer spindle - Tool holder: HSK63 - Tool retraction: automatic - Direction of rotation: right/left - Speed: 1250 - 24000 1/min, continuously programmable - Drive: frequency-controlled three-phase motor - Max. power at the tool: 7.5 - 12 kW (S1/S6 50%) - Spindle lubrication: grease, permanently lubricated - Cooling: liquid circulation cooling - Bearing: hybrid bearing (ceramic) Aggregate interface for main spindle, C-axis NC-controlled pressure ring Saw/drilling/milling aggregate - Spindle protrusion: 2-sided - Saw holder: mounting flange D=40 mm, pitch circle 52 mm - Saw blade diameter: max. 240 mm - Cutting depth: max. 85 mm - Drilling and milling holder: up to 16 mm shank diameter - Tool overhang: max. 85 mm - Speed: max. 14400 1/min Dkodezy N Eyspfx Agget Tool length control Power-pack incl. CE safety system - High-speed element for the X-axis traversing portal drive - Traversal speed of the two X drives at 100 m/min Note: Oscillating plate arrangement is omitted. Automatic tool changer magazine with 14 positions - moves along with the support in the X direction - Tool holder: HSK63 - Tool weight: max. 6 kg total weight incl. HSK holder - Tool diameter: max. 130 mm when fully occupied Max. 260 mm with smaller tool diameters or available space on the secondary positions - Tool change time: approx. 12-18 sec. Vertical drilling aggregate with 21 drilling spindles - Stroke in the Z direction: 60 mm - Drilling depth: max. 38 mm (with special drill bit up to 55 mm) - Direction of rotation: right/left - Speed: 1500 - 7500 1/min, frequency-controlled - Drive: 2.3 kW - Drill holder: d= 10 mm - Total drill length: 70 mm - Drill diameter: max. 35 mm - Spindle spacing: 32 mm Lift table 4000x2100 mm - Load capacity: 3500 kg - Height: 440 mm - Useful stroke: 600 mm - Stacking height: 480 mm - Motor: 2.2 kW, 3 x 400 Volt, 50 Hz - Pump: 8 l/min - Valve voltage: 24 Volt - Lifting speed: approx. 31 mm/sec. - Lowering speed: approx. 31 mm/sec. Belt conveyor 6000x 2250 mm Package processing Special functionality: 3 plates roughing 5600x2250x15 (3x18 mm) Infeed and outfeed, basic support plate on the machine table is taken into account Movable operating terminal Control system power control PC85 Software package with graphical operating programs Woodnest Complete Consisting of: Movable label terminal Software for external PC PICA - label printer Air conditioning system for cooling the control cabinet Note: The technical data and descriptions are copies of the original order confirmation. The information is for informational purposes only and is not binding.

Condition: ready for operation (used), Year of construction: 1980, functionality: fully functional, machine/vehicle number: 1670-736, type of input current: three-phase, power: 7.5 kW (10.20 HP), rotational speed (max.): 7,570 rpm, space requirement height: 1,600 mm, space requirement length: 1,200 mm, input voltage: 380 V, space requirement width: 800 mm, input frequency: 50 Hz, Equipment: documentation/manual, For sale: GEA / Westfalia Separator SA 14-47-076 professional centrifuge, built in 1980, serial number 1670-736. This machine was used in a craft brewery for beer clarification. Specifications: 15–45 hl/h • 7,570 rpm • hermetic version • self-cleaning / automatic sludge removal • flow meter • 7.5 kW motor • 380 V / 50 Hz • 32 A connection. History: The machine was completely overhauled in April 2014. It was acquired in 2018 from another brewery. Dsdpfoztma Uex Aggskt Maintenance work was documented by GEA / Westfalia Separator Belgium in 2021 and 2023, including the replacement of seals, sleeves, oils, greases and other maintenance consumables. Condition: Complete machine, photographed in its current installation. On-site inspection is possible by appointment. Documentation and GEA invoices are available for serious buyers. Asking price: €19,500 (excluding VAT). Transport, disassembly and loading to be agreed upon with the buyer.

Condition: excellent (used), functionality: fully functional, input voltage: 230 V, year of last overhaul: 2025, type of input current: AC, Grease filter, Filter King F 20 Hagesana Filter King TOP model: F 20 Tabletop unit Simple, robust technology! Dodpfxjzfypts Aggokt Stainless steel design 220V connection Used unit

Year of construction: 2020, condition: used, functionality: fully functional, machine/vehicle number: 376295, The Reitz KXE 250-050030-00 is an industrial centrifugal fan designed to generate a high total pressure increase in process installations. The assembly consists of a volute fan casing, an impeller mounted on a separately supported shaft, a coupled electric motor, and a common steel base frame with vibration-isolating mounts. The KXE design is suitable for moving air and process gases in systems requiring high flow rates and pressure. This unit was manufactured in 2020 for a rated volume flow of 500 m³/min and a total pressure increase of 2500 daPa. At its operating point, it delivers 602.4 m³/min at 1862 daPa and 3033 rpm. The shaft is supported by two 6318 bearings lubricated with Shell Gadus S2 V100 2 grease. Manufacturer: Konrad Reitz Ventilatoren GmbH & Co. KG Type: KXE 250-050030-00 Product type: industrial centrifugal fan Serial number: 376295 Year of manufacture: 2020 Material number: 10466442 Measurement category: C Efficiency grade: N61 Target efficiency grade value: 64.5 Rated inlet temperature: 20°C Operating-point inlet temperature: 40°C Rated inlet medium density: 1.205 kg/m³ Operating-point inlet medium density: 0.93 kg/m³ Rated volume flow: 500 m³/min Operating-point volume flow: 602.4 m³/min Rated total pressure increase: 2500 daPa Operating-point total pressure increase: 1862 daPa Optimum efficiency: 76.3% Rated shaft power: 256.57 kW Operating-point shaft power: 231.1 kW Rated rotational speed: 2980 rpm Operating-point rotational speed: 3033 rpm Djdpfezw Ug Rox Aggjkt Maximum rotational speed: 3159 rpm Maximum medium temperature: 80°C Drive-end bearing: 6318 Non-drive-end bearing: 6318 Lubricant: Shell Gadus S2 V100 2 Initial relubrication interval: 2460 operating hours Subsequent relubrication interval: every 2460 operating hours Grease quantity per bearing: 132 g Conformity marking: CE