Used Great Cnc Milling for sale (16,080)

Condition: used, Year of construction: 1999, swing dia. 680 mm max. turning diameter 429 mm turning length 440 mm control MORI SEIKI - MSC-501 turning speeds 5.000 U/min max. bar material dia. 56 mm Kedpfswplulsx Am Ejlr travel -x axis 233 mm travel -z axis 510 mm number of tapers in turret head 2x12 CNC Turning- and Milling Center | MORI SEIKI - ZL-150SMC equipped with main/counter spindle, c- axis, 2x turret for driven tools, bar feeder and chip conveyor. The machine is in a well-maintained condition. Please note that the technical details were added from comparable machines. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: ZL 150SMC | ZL150SMC | ZL-150 SMC | ZL 150 SMC

Condition: used, Year of construction: 2007, swing diameter 640 mm max. turning passage 640 mm control Simens 840 D Powerline - - - - - Main spindle - - - - - - - - - - - bar material dia. 65 mm chuck diameter 200 - 315 mm spindle bore diameter 80 mm diam. of main spindle in forward position 120 mm --- Subspindle --- - - - - - - bar material dia. 65 mm chuck diameter 315 mm spindle bore diameter 80 mm forward bearing diameter 120 mm - - - - - General data - - - - - - - - - - - spindle distance 1.500 mm turning length 1.185 mm Main-/Counter -spindle turning speeds 5.000 U/min driven tools turning speeds 12.000 U/min Slide cross X1, Y1: 550 / 180 mm Slide cross Z1: 1.185 mm Slide cross B1: 240 ° Slide cross X2: 180 mm Slide cross Z2: 1.050 mm Slide cross Z3: 1.150 mm CNC Turning- and Milling Center | DMG GILDEMEISTER - GMX 250 linear equipped with main/counter spindle, chip conveyor, tool changer, a turret for driven Kjdpfx Amjvx U A Se Ejlr tools and and a portal loading system (Pneumotec Portalsystem S-01623a). The machine has only approx. 32.000h operation hours. The machine is in a well-maintained condition. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: GMX250linear | GMX-250 linear | GMX 250linear | GMX-250linear

Condition: used, Year of construction: 2004, turning length 1.300 mm spindle diameter 120 mm spindle bore 38 mm control SIEMENS - 840 D numbers of positions in the tool changer 12 tool taper VDI 30 Kljdpfx Amexa Hkyj Eer CNC Turning- and Milling Center | NILES-SIMMONS - N10 equipped with Y-axis, turret for driven tools, steady rest, and tailstock. The machine is in well-maintained condition. For further technical details, please refer to the attached offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: N-10 | N 10 | N10/2 | N10-2

Year of construction: 2005, condition: used, max. turning diameter 540 mm max. turning length 1.020 mm bar capacity 65 mm Spindle speed 5.000 min -1 driven tools turning speeds 10.000 U/min control FANUC 18i-TB Kedpslmr Eijfx Am Ejlr Dimensions (L x W x H) 4.520 x 2.300 x 2.600 mm machine weight ab. 12.000 kg CNC Turning- and Milling Center | DOOSAN - PUMA MX 2000 S equipped with chip conveyor. Additional equipment: + counter spindle + B axis The machine is in good condition. A machine video from the production plant will be shared on request. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: MX2000S | MX-2000 S | MX 2000S | MX2000 S

Condition: used, Year of construction: 2021, max. swing diameter over bed 620 mm max. turning diameter 270 mm Max. Turning length 510 mm control Siemens Sinumerik 828D spindle bore 62 mm travel -x axis 200 mm Kodpfswmgixex Am Ejlr travel -z axis 560 mm travel -y axis 110 (+/- 55) mm no. of tools in turret 16 x tool taper BMT 45 - - - - - Main spindle - - - - - - - - - - - number of spindle speeds 4.500 U/min chucking diameter 200 mm --- Subspindle --- - - - - - - number of spindle speeds 6.000 U/min chucking diameter 150 mm CNC Turning- and Milling Center | MTEvo - T22SY equipped with a turret for driven tools, Y-axis, and sub-spindle. Scope of delivery / Accessories: - 7x static holders - 1x vertical driven tool - 1x horizontal driven tool The machine has accumulated only 1,656 spindle hours on the main spindle and 542 spindle hours on the sub-spindle. The machine is in a very well-maintained, like-new condition. For additional equipment information please refer to the original order confirmation which is included in the offer of this machine. Please note that the technical details were added from comparable machines. The machine video from the production plant will be shared on request. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: MTRent - T22SY | T 22 SY | T-22SY | T-22 SY | T22SY

Condition: used, Year of construction: 2001, workpice diameter max. 90 mm forward bearing diameter 140 mm Turning speeds mainspindle 4.200 U/min Klsdpfevzcnbex Am Ejr Power 35,5 KW Control INDEX C 200-4 travel -x axis 1.500 mm travel -z axis 340 mm travel -y axis 180 mm b-axis 360 ° CNC turning and milling center vertical | INDEX - V300 equipped with a turret for driven tools as well as y- + B- axis. Further information: - direct measuring system on X + Z The machine is in good condition. For additional equipment information please refer to the original order confirmation which is included in the offer of this machine. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: V-300 | V 300

Condition: used, Year of construction: 2004, max. working diameter 610 mm max. working lenght 1.522 mm Kjdex Avr Sspfx Am Eelr travel -x axis 740 mm travel -y axis 410 mm travel -z axis 1.838 mm control MAZATROL Fusion 640M Pro b-axis 240 ° c-axis 360 ° number of spindle speeds 4.000 U/min spindle bore 88 mm milling spindle turning speed range 12.000 U/min numbers of positions in the tool changer 80 CNC Turning- and Milling Center | MAZAK - INTEGREX E-410H The machine is in a well-maintained condition. The machine video from the production plant will be shared on request. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: INTEGREXE41H | INTEGREX 410H | INTEGREX-E410 H

Condition: used, Year of construction: 1988, functionality: unexamined, machine/vehicle number: 00374030, turning length: 2,000 mm, turning diameter over cross slide: 770 mm, turning diameter: 770 mm, spindle speed (max.): 1,800 rpm, feed rate X-axis: 10 m/min, feed rate Z-axis: 10 m/min, total height: 2,125 mm, total length: 5,690 mm, chuck outer diameter: 250 mm, total width: 2,900 mm, overall weight: 8,500 kg, Equipment: rotational speed infinitely variable, The Heyligenstaedt 24 U / 2000 CNC lathe, built in 1988, is in very good and well-maintained condition, but was last used in production in 2023. The machine is equipped with extensive accessories (see photos) and can be inspected at the production site AQUAtec Machining AG Industriepark, 6460 Altdorf, Switzerland, upon request. Kledpfx Amswfqvme Eer

Condition: excellent (used), Year of construction: 1998, Mazatrol T-Plus control Max. turning diameter: 470 mm Max. swing diameter: 575 mm Turning length: 1,500 mm Spindle speed: 3,000 rpm Kedoy Ehm Aepfx Am Eslr Magazine for 40 tools (KM 63/SK 40) B-axis Y-axis Steady rest Tailstock Chip conveyor

Condition: excellent (used), Year of construction: 1995, Centre height: 330 mm Centre distance: 2000 mm Working area: Max. turning diameter over bed cover: 650 mm Max. turning diameter over cross slide: 360 mm Main spindle: Spindle diameter in front bearing: 140 mm Spindle bore: 107 mm Main drive: 58.5 kW 2-stage speed range: 4 – 750 rpm / 750 – 3060 rpm Feed drive: Rapid traverse X/Z axis: 10/10 m/min Turret: Number of tool stations: 12 Of which driven tool stations: 6 Tool shank holder: VDI 50 mm Dimensions / Weight: Required floor space (L x W x H): approx. 6400 x 2150 x 2000 mm Weight: 9400 kg Accessories / Special Features: • CNC path control HEIDENHAIN TurnPlus EP 90 with color display • Spindle orientation, C-axis • 12-position turret, VDI 50, including 6 driven tool stations in turret, manufacturer SAUTER, DIN 5482 B 20x17, max. speed 3000 rpm • Hydraulic 3-jaw chuck Ø 315 mm with various clamping jaws • Hydraulic tailstock with drag device • Hydraulic quill actuation • Extraction unit, manufacturer LTA • Various tool holders VDI 50 • CE-compliant In 08/2025, GILDEMEISTER service replaced the following parts: 1 servo motor, 1 AC servo controller inverter power module for 2 axes, 1 Simodrive power module, 1 line-commutated return module, 1 control insert for 1 axis, 1 controller module for 2 axes inverter servo drive, 1 Simodrive power module for 1 axis motor. Total repair cost: EUR 17,000.00 net Important note: Kljdpfx Amsx Sx Hts Esr On this very well-maintained CNC turning and milling center GILDEMEISTER CTX 600-2000 (year 1995), the positioning of the C-axis does not function and the driven milling unit rotates but does not engage. Otherwise, the machine is in perfect condition. A demonstration under power is possible at any time by prior appointment. Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, turning length: 1,585 mm, turning diameter: 300 mm, controller model: Siemens 840D Powerline, number of slots in tool magazine: 120, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Turning length: 1,585 mm Turning diameter: 300 mm Kljdpfx Ajy Dqtiom Eer Tool magazine capacity: 120 positions MACHINE DETAILS Control: Siemens 840D Powerline EQUIPMENT Sub spindle C-axis Hollow clamping device (diameter 68 mm) on main spindle, left Measuring device with probe Oil mist separator

Condition: used, Year of construction: 2011, Technical details: weight of the machine ca.: 11 t Kedoyz Sdqspfx Am Eolr Gildemeister MF Twin 65-II lathe with loading automation. This machine is suitable as a counter spindle machine for 4-axis machining on the main and counter spindles, complete machining (turning, drilling, milling, Y-axis, B-axis) of bar and shaft parts. *

Condition: good (used), Year of construction: 2005, The machine has received annual maintenance under a service contract with Okuma. Okuma Mac Turn 550 W / 9-axis Turning-Milling Center Year of manufacture: 2005 Control: OSP-E 100 L / extension kit “M”, One Touch IGF kit Milling spindle slide: X/Y/Z/B axes Sub-spindle W axis Main spindle with C axis Sub-spindle with C axis Lower turret slide X/Z axes Max. turning diameter: 720 mm Turning length: 2,000 mm Distance between tailstock tip and spindle nose: 2,505 mm Y-axis travel: 250 mm (+/- 125 mm) Main spindle speed: up to 3,500 rpm Spindle power: 30 kW Lower turret: 12 stations without driven tool stations Lower turret with steady rest, thus only 9 stations instead of 12 Self-centering steady rest: 35 - 240 mm Milling spindle continuous B axis: 0.001° Tool magazine: 80 stations HSK 100 tool interface New Forkhardt 3-jaw chuck Ø 400 mm (value: €12,000) Sub-spindle without chuck, currently equipped with mandrel / supplied without mandrel Enlarged main spindle bore 110 mm (Ø 150/110 mm) Spindle nose size 11 2-stage clamping pressure Sub-spindle as hollow shaft motor, speed up to 3,800 rpm Ethernet LAN interface Renishaw in-process measurement Additional measurement system on Y axis Tool length 450 mm instead of 350 mm Door automation on both doors Chip conveyor Gravity band filter with clean tank, 900 liters Frequency-controlled supply pump, up to 20 bar The machine has received annual maintenance through a service contract with Okuma. In 2023, the cable drag chain of the W axis, including all hoses, was replaced. In October 2024, the linear guides for X/Y/Z were replaced. Work performed by Okuma: - Machine cleaned - Sheetmetal parts and covers dismantled - 8th axis dismantled - Traveling column dismantled and removed from the machine - ATC removed and taken out of the machine - All linear guides removed - Mounting surfaces of the ZA axis cleaned - New linear guide ZA including carriages installed and tightened to spec - New ball screw ZA including bearings mounted and fitted - Baseplate of the traveling column installed and bolted to spec, carriages fastened, lubrication lines connected - ATC and auxiliary parts reinstalled and connected - New YA and XA linear guides installed and tightened to spec, new YA ball screw with bearings installed - Traveling column set in place and lubrication lines connected, XA baseplate installed and aligned - 8th axis installed and aligned - H1 turret installed - 8th axis drive motor installed - Install 8th axis and new H1, set up geometry - Function test 8th axis and H1 - Run-in program for B axis, approx. 12 hours, then drain old oil from 8th axis - Run-in program for H1 and prepare defect report for OEG - Left door installed, various sheetmetal parts adjusted - Chuck installed - Adjust zero points - Check tool change Kledpoyt Nvtefx Am Ejr

Condition: used, Year of construction: 2001, functionality: fully functional, travel distance X-axis: 850 mm, travel distance Y-axis: 480 mm, travel distance Z-axis: 580 mm, total height: 2,990 mm, total length: 4,226 mm, total width: 2,345 mm, table width: 570 mm, table length: 1,000 mm, overall weight: 6,000 kg, Equipment: chip conveyor, documentation/manual, - CE marking present: Yes - CE certificate available: No - Control: CNC - Control system brand: Heidenhain - Control system type: 426-M - Number of axes: 3 - X-axis travel [mm]: 850 - Y-axis travel [mm]: 480 - Z-axis travel [mm]: 580 - Table length [mm]: 1000 - Table width [mm]: 570 - Min. spindle speed [rpm]: 40 - Max. spindle speed [rpm]: 12,000 - Transport dimensions: 4226 x 2345 mm x 2990 mm (L x W x H) - Transport weight [kg]: 6,000 kg - Cooling system: external cooling + external air blast + ICS (internal coolant supply) - Tool holder SK40 - Magazine capacity: 21 VAT: The indicated price is exclusive of VAT You are welcome to arrange a viewing, the machines are powered up for inspection. Sale is exclusively to businesses, with all warranties excluded (sold as seen). Kledey D Ng Iopfx Am Ejr Dismantling, collection and transport are the responsibility of the buyer. A 10-ton overhead crane is available on site. Any company names and trademarks mentioned are the property of their respective owners and are used for identification and description purposes only. Technical data may deviate and errors in the description are subject to change.

Condition: used, Year of construction: 1999, functionality: limited functionality, travel distance X-axis: 1,250 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 685 mm, total height: 3,030 mm, total length: 4,280 mm, total width: 2,860 mm, table width: 680 mm, table length: 1,400 mm, overall weight: 8,000 kg, Equipment: chip conveyor, documentation/manual, - CE marking available: Yes - CE certificate available: No - Control: CNC Kodpfsy D Ndaox Am Eolr - Control system brand: Heidenhain - Control system type: 426-M - Number of axes [pcs]: 3 - X-axis travel [mm]: 1250 - Y-axis travel [mm]: 600 - Z-axis travel [mm]: 685 - Table length [mm]: 1400 - Table width [mm]: 680 - Min. spindle speed [rpm]: 40 - Max. spindle speed [rpm]: 12000 - Transport dimensions: 2860mm x 4280mm x 3030mm (w x l x h) - Transport weight [kg]: 8000kg - Cooling system: External cooling + external air blast + internal coolant supply (IKZ) - Tool holder: SK40 - Magazine positions: 21 Special feature: Unresolved fault in tool magazine VAT: The stated price is subject to VAT You are welcome to inspect the machine, it is under power. Sale is only to commercial customers, with exclusion of any warranty (sold as seen). Dismantling, collection, and transport are to be arranged by the buyer. A 10-ton overhead crane is available on site. All company names and trademarks are the property of their respective owners and are used for identification and descriptive purposes only. Deviations from technical data and errors in the item description may occur and are reserved.

Condition: used, Year of construction: 2003, Technical details: weight of the machine ca.: 11 t Kedsyzyudepfx Am Eslr Gildemeister MF Twin 65-II lathe with loading automation. This machine is suitable as a counter spindle machine for 4-axis machining on the main and counter spindles, complete machining (turning, drilling, milling, Y-axis, B-axis) of bar and shaft parts. *

Condition: excellent (used), functionality: fully functional, Fixed tool holders Machine: MORI SEIKI SL2000 Turret manufacturer: SAUTER ---- 2x→ No. 444-119 Turning Tool Holder 25 mm steel holder Fixed turning tool holder Price: on request ----- 1x→ No. 444-201 Double Turning Tool Holder for main spindle and sub spindle with 1x clamping bar for 25 mm tool steels Fixed turning tool holder Price: on request ----- 1x→ No. 444-210 Boring Bar Holder Cylindrical mount ø 32 mm second mount ø 32 mm; 57 mm to the rear Price: on request ----- 1x→ No. 444-205 Turning Holder Mount 25 mm steel holder Kljdpfx Aoynb E Nom Eer Price: on request

Condition: like new (used), Year of construction: 2022, functionality: fully functional, feed length X-axis: 9,040 mm, feed length Z-axis: 200 mm, feed rate X-axis: 60 m/min, saw blade diameter: 700 mm, saw blade width: 5 mm, spindle speed (max.): 5,000 rpm, We are offering an HM-Z3 CNC crosscut saw and milling combination (year of manufacture: 2022). The machine is in excellent condition, has hardly been used, and can be considered virtually as new. Due to a change in our workflow, this machine has become redundant and is now available for sale. If you have any questions or require further information, feel free to send us a message or give us a call. Kodpfx Aeyzpm Nsm Eslr

Condition: used, Year of construction: 2008, Cinch Mill 40 milling center ( L et W Machine Tools , Taiwan ) Year 2008 Fagor control X Y Z 1700x820x700 Spindle 6000 rpm Spindle taper BT40 Magazine 24 tools Klsdpfx Aevwg Tmem Ejr

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Technical details turning diameter 820 mm turning length 6000 mm control Siemens Si 840 D sl total power requirement 155 kW weight of the machine ca. 65 t dimensions of the machine ca. 16350 x 3700 x 3850 m Additional information Purchase price EUR 1.550.000 Time recording from Feb. 2025 Operating hours = 38601 h Main spindle = 1958 h Milling spindle = 1760 h CNC control Si 840D sl Working area 6000 mm Working height 1390 mm Kjdsyymvljpfx Am Eslr Swing diameter over bed slide/bed 820 mm X-axis travel +850 -25 mm Z-axis travel 6820 mm C-axis, smallest increment +/-0.001° Workpiece spindle Spindle head according to DIN 55026 A15 Bathing through 160 mm Front diameter Bearing 240mm 2-stage gearbox, infinitely variable programmable Drive power at 100/60% duty cycle: 78/87kW Speed ranges: 2 Speed range I: 10-501 rpm Speed range II: 10-1750 rpm Torque I, 60% duty cycle: 8000 Nm Torque II, 60% duty cycle: 2308 Nm C-axis Holding torque with backlash-free spindle brake: 3000 Nm Speed: 0-50 rpm Maximum torque (100/60% duty cycle): 3700/4430 Nm Steady rest clamping range: 70-425 mm Turning, drilling, milling head Front diameter: Bearing 110mm Interface HSK100/C8 Tool magazine Storage locations: 2 magazines, Baluff chip system Max. tool diameter (each position/every 2nd position) 125/200mm Max. tool length 600mm Tool weight 25kg Tailstock Quick diameter 180mm Stroke 170mm Internal taper MK6 Axially force, manually adjustable 5-30 kN Quick tip height adjustment +/-0.15mm Other: Collision monitoring sensor ACS 3-ARTIS Chip conveyor system Coolant system 980l tank and more

Condition: used, Year of construction: 1998, turning diameter / mm turning length / mm control / Technical Specifications Working Area Max. swing diameter: 540 mm Max. turning diameter: 540 mm Max. turning diameter over ways: 520 mm Max. turning length: 1029 mm Main Spindle Speed range: 35–5,000 rpm Main drive power: 22 kW Max. torque: 349 Nm Spindle nose: A2 – 6 inches Spindle bore: 61 mm Spindle positioning C-axis: 0°–360°/0.001° Tool turret Tool turret type: Single-spindle turret Driven tools Speed range: 15–6,000 rpm Drive power: 7.5 Kw Max. torque: 103 Nm Tool magazine Number of tool positions: 40 Max. tool weight: 7 kg Kedpfxsyyqthe Am Eolr Machine weight: approx. 5700 kg A wide range of accessories included – see photos A backup from 3 September 2012 is available

Condition: excellent (used), Year of construction: 2005, turning length: 1,585 mm, turning diameter: 760 mm, spindle speed (max.): 6,000 rpm, travel distance X-axis: 630 mm, travel distance Y-axis: 230 mm, travel distance Z-axis: 1,585 mm, bar passage: 80 mm, Max. turning Ø: 760mm X-axis: 630mm Y-axis: 230mm Z-Axis: 1585mm Kjdpfx Aovgcpvsm Eslr B Axis: 225° Spindle bore: 80mm Speed range: 6000Rpm B-Axis Speedranges:12000Rpm B-Axis power: 19kW Length: 7000mm Width: 2700mm Height: 2800mm Weight: 14500kg

Condition: used, Year of construction: 1995, CNC Universal Milling Machine Manufacturer: HERMLE Model: UWF 902 S Year of manufacture: 1995 Operating hours: 65,071 Control system: HEIDENHAIN TNC 426 Working area X/Y/Z: 600 x 450 x 500 mm Spindle speed range: 20 - 6,300 rpm Tool holder: SK 40 M & H 3D probe (for workpiece probing) Klodpfx Ajv Rxa Ssm Ejr Vertical-horizontal milling device Quill Coolant system Angle table: 900 x 458 mm Weight: 4,000 kg Machine dimensions LxWxH approx.: 3,900 x 2,000 x 2,000 mm

Condition: used, Year of construction: 1995, CNC Universal Milling Machine Manufacturer: HERMLE Model: UWF 902 H Year of manufacture: 1995 Operating hours: 46,680 Control: HEIDENHAIN TNC 426 Ksdpfx Ajv Rpr Sjm Eolr Travel X/Y/Z: 600 x 450 x 500 mm Swivel table: 900 x 458 mm Renishaw 3D probe Spindle speed range: 20 to 6,300 rpm Tool holder: SK 40 Coolant tank Drive power: 8.6 kW Weight approx.: 4,500 kg Machine dimensions LxWxH approx.: 2,950 x 2,200 x 2,300 mm

Condition: good (used), Year of construction: 2021, functionality: fully functional, Fanuc control, 66 mm spindle bore, two turrets, two Y-axes, sub-spindle, tailstock function, tool measuring arm, programmable finished parts gripper, chip conveyor, Irco short bar loader magazine, Hainbuch chuck on both spindles, accessories: tool holders, driven tool holders, immediately available. Kljdpfx Amoy Df E Tj Eer