Used Gripper for sale (732)

Condition: used, Year of construction: 2015, controller manufacturer: Hurco, controller model: MAX5, _____ Description: Year of manuf. : 2015 Control : Hurco MAX5 Speed : 10000 rpm Movement X/Y/Z : 762/508/610 mm Tool holder : SK 40 In General: Year of manufacture:2015 Control system:Hurco MAX5 Travel X/Y/Z:762/508/610 Speed:10,000 rpm Spindle: Kljdsxz I A Hspfx Addol Technology:Belt spindle Speed:10,000 rpm Tool holder:SK 40 Work table: Clamping surface:1,020 x 510 mm Maximum table load:1,300 kg : Tool magazin: Technology:Drum magazine Tool changer:Double gripper Number of stations:24 Max. tool diameter:81 (120) mm Max. tool length:300 mm Equipment: Chip disposal:Chip conveyor Coolant supply:Internal coolant system NC rotary table:4th axis (A-axis) Tool magazine:30 stations Tool measurement:Renishaw measuring probe

Condition: used, _____ 2 Pieces of Pfiffner RT 100-12 Description: Year of manuf. : 2013 Control : Siemens 840 D Rotary-Indexing-table/Spindle: Clamping stations:12 motorised spindles Drive:Torque drive, water-cooled Position measuring system:Direct Switching time:1.5 seconds Spindles:Water-cooled motor spindles C-axes:0.001°, hydraulic clamping Speed:5,500 rpm Power:11 kW Clamping device:Chuck Basic modules: Technology:Positioning module, 3-axis X-axis:50 mm Y-axis:100 mm Z-axis:100 mm Position measuring systems:Direct in all axes Coolant supply:Integrated : : Workpiece size (max.):100 x 100 x 100 mm Station 1: Horizontal:feeding of raw parts (indexing conveyor + Stäubli robot) Vertical:Measuring raw part Station 2: Horizontal:4-fold turret without drive Vertical:Measuring reclamping error (C-axis zeroing) Station 3: Horizontal:4-fold turret without drive Vertical:Not used Station 4: Horizontal:4-fold turret without drive Vertical:Not used Station 5: Horizontal:6-position turret with WAN, 10,000 rpm Vertical:6-position turret with WAN 10,000 rpm Station 6: Horizontal:4-fold turret without drive Vertical:Not used Station 7: Horizontal:6-position turret with WAN, 10,000 rpm Vertical:Not used Station 8: Horizontal:6-position turret with WAN, 10,000 rpm Vertical:Not used Station 9: Horizontal:4-fold turret without drive Vertical:Not used Station 10: Horizontal:6-position turret with WAN, 10,000 rpm Vertical:Not used Station 11: Horizontal:6-position turret with WAN, 10,000 rpm Vertical:6-position turret with WAN 10,000 rpm Station 12: Horizontal:Charging/discharging unit with double swivelling gripper + discharging belt Equipment: Chipmanagement:Chip conveyor High preassure unit:Cooling unit 50 bar Toolmonitoring:Toolbreaktagecontrol ARTIS Rawmaterialfeed:Conveyorbelt with robot Finishpartremoval:Conveyor with 3-way switch Oilmistseparation:Electrostatic filter Fire extraction system:Kraft + Bauer Kedsw Si T Aopfx Addell Part labelling:Laser Parts cleaning:HESO cleaning system

Condition: used, _____ Description: Kodpfxjvxmy Ne Addoll Year of manuf. : 2009 Control : Siemens C200-4D SL In General: Year of construction:2009 Control system:Siemens 840 Dsl (C200-4D SL) Bar capacity:65 mm Milling spindles:18,000 rpm Main spindle: Technology:Motorised spindle Speed:5,000 rpm Max. power:35.5 kW Torque max.:170 Nm C-axis:0.001° Z-axis:390 mm Bar capacity:65 mm Clamping cylinder:Hollow clamping cylinder Chuck:3-jaw chuck Sub spindle: Technology:Motorised spindle Speed:5,000 rpm Max. power:35.5 kW Torque max.:170 Nm C-axis:0.001° X-axis:600 mm Z-axis:390 mm Bar capacity:65 mm Chuck:3-jaw chuck Tool carrier I: Technology:Milling spindle on cross slide Speed:18,000 rpm Tool holder:HSK 40 X-axis:350 mm Y-axis:160 mm (+/- 80 mm) B-axis:230° Tool carrier II: Technology:Milling spindle on cross slide Speed:18,000 rpm Tool holder:HSK 40 Y-axis:160 mm(+/- 80 mm) B-axis:230° Tool magazin: Technology:Chain magazine Number of stations:80 pieces Tool changer:Double gripper Tool length max.:180 mm Equipment: Chip disposal:Chip conveyor Coolant supply:IKZ system with filter Parts removal:Gantry-type pick-up Bar loader interface:Electrically prepared Tool monitoring:Drill breakage monitoring

Condition: used, _____ Description: Year of manuf. : 2008 Control : Siemens 840 Speed : 8000 rpm Movement X/Y/Z : 800/800/800 mm Tool holder : HSK 100 In General: Year of manufacture:2008 Speed:8,000 rpm Tool holder:HSK 100 Control system:Siemens 840 D Travel X/Y/Z:800/800/800 mm Table speed:700 rpm Spindle: Technology:Geared spindle Speed:8,000 rpm Ksdpfx Adswx A Hqedjll Max. power:28 kW Max. torque:727 Nm Tool holder:HSK-100 Turning function:Spindle clamping NC swivel head: Technology:Universal milling head B-axis:0.001° NC- Millturn table: Max. speed:700 rpm Clamping surface:800 x 630 mm Max. table load:800 kg Tool magazin: Technology:Chain magazine Number of stations:120 Tool changer:Double gripper Equipment: Chip disposal:Chip conveyor Coolant supply:IKZ system, 80 bar Coolant temperature control:Immersion cooler Position measuring systems:Direct in all axes Automation:2-fold pallet changer Turning function:Spindle clamping + rotary table Workpiece measurement:Preparation for measuring probe Process monitoring:Operating mode 4 Set-up mode:Electronic handwheel Emulsion mist separator:Mechanical separator

Condition: used, Year of construction: 2021, controller manufacturer: Heidenhain, controller model: TNC 640, _____ Description: Year of manuf. : 2021 Control : Heidenhain TNC 640 Speed : 10000 rpm Movement X/Y/Z : 1000/600/600 mm Tool holder : SK 40 In General: Year of manufacture:2021 Control system:Heidenhain TNC 640 Traverse paths X/Y/Z:1 mm Speed:10,000 rpm Spindle: Technology:Belt drive Speed:10,000 rpm Tool holder:SK 40 Media feed-through:Blown air + cooling lubricant Working table: Clamping surface:1,200 x 600 mm Max. table load:750 kg Tool magazin: Technology:Drum magazine Tool changer:Double gripper Number of stations:30 Kledpfx Adoxxny Tjdsl Maximum tool length:340 mm Maximum tool diameter:120 mm Equipment: Measuring systems:Directly in X/Y/Z (glass scales) Chip removal:Chip conveyor Coolant supply:Internal coolant system, 20 bar Workpiece measurement:Touch probe Tool measurement:Tool setter Set-up mode:Electronic handwheel Oil separator:Mechanical skimmer Media feed-through Spindle:Coolant + blast air

Condition: good (used), BIHLER GRM100 multislide punching and forming machine, Made in Germany. Machine re-engineered in year 2010 originally by Bihler, updated with servo motor, pump, rewired, new control, etc. Equipped with 4x forming slides and 18 ton press station. Gripper feed on right-hand side with straightener. Max width of strip 100 mm. Max wire diameter 10 mm. Standard feed length 250 mm max. Max operating speed 135 strokes per minute approx. Servo motor. Touch screen control. Air clutch. Weight cca. 6000 kg. Power supply 400/480V, 50 Hz. On stock more Bruderer, Schaal, and Mabu high speed presses. Also Ideal flash butt welding machines. Kedpfspm H Haex Addjll

Condition: excellent (used), Year of construction: 2009, Perfect Binding Line, consisting of: Gathering Machine ZU 841.A - basic frame with 21 gathering stations - 19 standard feeders - 1 handfeeding station (covering 2 housing stations) Kljdpjvg Ad Tofx Addol - device for electrostatic fixation of three advertising medias - integrated jogging station - Aircenter - reject unit AS 841 to the right - transfer channel as connecting unit to the binder Perfectbinder KM 473 - 26 clamps - handfeeding - main milling station - equalized milling station - notching station - micro-notching station - brushing station with roller brush - 2 Hotmelt spine gluing units - 1 Hotmelt side gluing unit - 3 premelters LH 375 - IR heating at curve - stream cover feeder SAL 411.A - scoring station for 4 scores - 2 pressing stations - gripper carriage delivery - laydown device Transport and Drying Line, incl. Ambaflex drying tower, incl. emergency delivery Three Knife Trimmer HD 153.P - copilot - right hand infeed - counter stacker - silicon spraying device - standard cutting cassettes 7 - 18 additionally available: Kolbus book block feeder with delivery belt Kolbus card gluer KK 841 PUR spine gluing unit with Nordson smelting unit Best for PUR cover 600L Kolbus destacker AE 360 Kolbus blocking unit VB 120 pallettizer Kolbus PL 770 or Kolbus PL 771

Condition: used, Year of construction: 1990, Technical details: Pressure: 63 t distance between columns: 200 mm stroke: 150 mm dayligth: 430 mm no. of strokes: 400 Hub/min T-slots H 12 650: 18 mm hole in table: 420x160 b x l mm ram surface area: 650 x 450 mm control: Wanske Tronicpress CNC passage of columns: 550x540 mm tank: 200 l stroke of ram - fixed: 100 mm ram diameter: 40 mm table height over floor: 1000 mm table: 600x450 mm table height over floor with metal base stand: 880 mm total power requirement: 30 kW weight of the machine ca.: 3,9 t Hydraulic automatic punching press for precision work (high-speed press) - for punching, drawing, pressing, minting, bending, riveting, straightening, assembling - with hydraulic gripper feed type HS 150 and 7-roller straightener (moving) Kledpfsu Icxqox Addol - Normal strips of approx. 0.4mm - 2.5mm thickness x approx. 160mm width, as well as narrow strips up to approx. 4mm can be processed. Feed length can be adjusted as required via the control unit. - with ram round column guide - with automatic central lubrication - High-speed: up to 400 strokes min-1 - motorized adjustable fixed stop (bottom can be adjusted by hand/motorized) - Operating modes such as continuous stroke and/or single stroke Equipment: - 1x hydraulic unit - 2x control cabinets *

Condition: used, Year of construction: 2002, Technical details: x-travel: 1060 mm y-travel: 610 mm z-travel: 610 mm control: Ultimax 4 spindle speed:: 10 - 10.000 U/min tool taper: SK40 tool changer with: Trommelmagazin mit 24 Plätze places feed speed: XYZ: 3 - 7.000 mm/min Ksdju Iddnjpfx Addsll rapid traverse:: XY: 30 m/min rapid traverse: Z: 20 m/min table-size: 1220 x 510 mm table load: 1,1 t air-pressure connection: für 6 bar bar Total power requirement: 30 kVA Weight approx.: 6,28 (ohne Anbauteile) t dimension machine xH: 2,82 x 3,2 x 2,7 m dimension swarf conveyor LxWxH: 3,0 x 0,65 x 1,5 The machine is currently in the technical department. delimited working area by chip splash guard cabin incl. cooling device with feeding (30bar internal coolant system) (size 1200x500x150mm) capacity for 340Liter spindle with internal coolant system Scraper belt chip conveyor control panel with two screens Attention! Tool gripper arm for tool change is missing on the machine! Is on sale with this limitation! i.D. *

Condition: new, Schunk PGN+200 / 1AS universal gripper 371405 + accessory pack 5512049, unused, 100% functional, scope of delivery as per photos Kedpfxsulqkze Addsll

Condition: ready for operation (used), SIG Positec Berger Lahr linear positioner LP-A + gripper unit, consisting of: LP-A (X=300/Z=100), motors VRDM 3910/50 LWB, UCH 325V, IN 2A, MN 4Nm, ROBA-stop-M 4/891.124.1 SO, 24V, 22W, 6Nm, used, very good condition, 100% functional Klsdpfxsi Eclyj Addsl

Condition: ready for operation (used), Maho double gripper for MAHO MH 600 E including accessories, see photos, used, normal signs of wear, 100% functional, scope of delivery as per photos Kledpforv Ta Rex Addsl

Condition: new, Schunk SRU+50-W / 362622 universal swivel unit + 2 x PZN 125-1 / 300313 universal gripper,unused, 100% functional, scope of delivery acc. to photos Kledpfx Aji Ec Nnjddjl

Condition: new, Schunk PZN+160 / 1 AS universal gripper 303514, unused, 100% functional, scope of delivery as per photos Kljdpfsulqk Iox Addol

Condition: new, Year of construction: 2026, BIEGEMASTER Up- and Down- Bending machine – model XBend 6.2,00 Working length : 6400 mm Bending capacity steel 400 N/mm² : 2,00 mm stainless steel 600 N/mm² : 1,50 mm alu 190 N/mm² : 3,00 mm Kledpfx Adegp S N Isdjl Stands + Tension Arms : 7 pcs. Driven linkage joints upper beam : 7 pcs. Driven linkage joints down beam : 7 pcs. Incl. Cranked bending beam for making small Z-, U- and hat-profiles Incl. BMS Multi-Touch-Steuerung and automatic back-gauge Incl. electric cutter Incl. taper back-gauge Incl. gripper system Directly from the manufacturer. Made in Germany.

Condition: good (used), Beam claw, sheet metal clamp, sheet metal claw, beam clamp, sheet metal gripper, material gripper, material gripper, profile steel tongs, plate gripper, lifting claw, lifting clamp, sheet metal clamp, sheet metal claw, beam clamp, beam claw, sheet metal gripper, material gripper, material gripper -Sheet metal clamp: Safety lifting clamp with swiveling support ring -Type: 3TSEVLA x 06T 1 28A -Clamping range: 0-35 mm Kodsx E Slcopfx Addoll -Load capacity: 3 t -Dimensions: 200/80/H320 mm -Weight: 7.6 kg

Condition: used, Year of construction: 2014, functionality: unexamined, overall weight: 1,000 kg, load capacity: 80 kg, arm reach: 2,456 mm, pivoting range: 180 °, Yaskawa Motoman MS80W industrial robot + DX 100 controller automation cell Description Machine designation: Robot arm Manufacturer: Yaskawa Model: Motoman MS80W Serial number: S3Q057-1-2 Year of manufacture: 2014 Payload: 80 kg Ksdpfx Asxu Nc Ueddjll Weight: 580 kg Note: Without the end effector (gripper) for the handling robot Machine designation: Robot controller Manufacturer: Yaskawa Model: DX100 Serial number: 140545 Year of manufacture: 2014 Accessories: Discharge conveyor, enclosure, and access control As shown, functionality untested, but was in operation until recently.

Condition: good (used), Year of construction: 2005, machine/vehicle number: 4222559205002, Offer 25437 Technical Data: - Pressing force: 500 kN - Stroke infinitely adjustable: 10 - 32 mm - Strokes per minute: 22 - 27 1/min - Throat depth: 510 mm - Installation height: 350 mm - Drive: 400 V / 4 kW - Punching, for example: up to 27 mm Ø in steel: 14 mm - With special punching saddle, e.g.: up to 39 mm Ø in steel: 9.5 mm - e.g. up to 90 mm Ø in steel: 4 mm - Dimensions (approx.): W 700 x H 1700 x D 1200 mm Klodsx S Ehwopfx Addjl - Weight (approx.): 1150 kg - Equipped with: - Hydraulic low-pressure centre punch locator - Extended punch holder for punching in section steel - Roller conveyor with gripper feed, control PEHU 101 - Roller conveyor approx. 6000 mm - Foot switch - Emergency stop button

Condition: good (used), Year of construction: 2005, functionality: fully functional, travel distance X-axis: 400 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 350 mm, Automation cell consisting of a Zimmer & Kreim Genius 700 die-sinking EDM system and the Chameleon handling system *With the following equipment:* - Travel: 400 x 350 x 350 mm - table: 575 x 500 mm - Workpiece weight: 700 kg - Generator Genius 700 with automation Chameleon - 52 amps generator power - Rotating spindle - Internal controlled heat exchanger - Fire extinguishing system Kraft & Bauer - Extraction unit - Control unit for automated or manual pallet carriers - EROWA quick-action chuck ITS Automation system Chameleon with: - Chameleon base unit - 2 x rails - 2 x magazine - 195 electrode positions ITS EROWA - 10 UPC pallet places EROWA or PARTOOL - 1 loading drawer - identification system - EROWA double rotary gripper ITS - EROWA pallet gripper UPC / PARTOOL Process control system Klodpfx Aoiix R Ssddel - JOBmodEDM - PROGmod - Comfort database - IDENTmod - SUPmod Transport, IBN & training at cost Well? Who would rather start eroding and automating today than tomorrow?

Year of construction: 1993, condition: ready for operation (used), A complete linked Hermetik slab press line Hanke with a Hermetik press is available. Product: concrete and building material slabs, pressing force: 600t, pressing process: dry, min. existing format: 400mm/400mm, max. existing format: 800mm/600mm, production capacity with 400mm/400mm slabs: approx. 96m²/h. Including conveying and circulation system, storage system, surface and post-treatment systems, blasting system for surface structuring, impregnation system, coating system, handling and automation technology, portal and gripper systems, direct washing, automatic stacking and transfer operations, packaging and further peripheral equipment. This is a complete 0-100 line. Documentation available. On-site inspection is possible. Ksdjx S Rbvopfx Addsll

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, CNC twin-spindle turning center Control: CNC path control including 19" TFT Siemens Sinumerik 840 D sl solution line with ERGOline control and with ShopTurn 3 G TECHNICAL DATA Max. turning diameter 340 mm Spindle distance 1470 mm Turning length 1135 mm Swing over bed 700 mm Swing to tool carrier 2540 mm Travel paths: X1 – Tool carrier I 270 mm Y1 – Tool carrier I 120 mm Z1 – Tool carrier I 1200 mm X2 – Tool carrier II 195 mm Y2 – Tool carrier II 80 mm Z2 – Tool carrier II 1200 mm X3 – Counter spindle slide 180 mm Z3 – Counter spindle slide 1200 mm Main spindle Integrated spindle motor ISM 102 Drive power (100/40% duty cycle) 40/48 kW Torque (100/40% duty cycle) 570/680 Nm Kljdpfxswcd S No Addsl Speed range 0-4000 rpm Bar diameter 102 mm Draw tube inner diameter 104 mm C-axis and spindle brake (angular resolution) 0.001° Counter spindle Integrated spindle motor ISM 76 Drive power (100/40% duty cycle) 25/32 kW Torque (100/40% duty cycle) 280/380 Nm Speed range 0-5000 rpm Bar diameter 65/75 mm C-axis (angular resolution) 0.001° Slide 1 Tool carrier (direct drive) Number of tools 12 Tool holder diameter VDI (DIN 69880) 40 mm Maximum power (100/40% duty cycle) 10.9/14.2 kW Maximum torque (100/40% duty cycle) 26/34 Nm Speed range 40 – 10,000 rpm Slide 2 Tool carrier (direct drive) Number of tools 12 Tool holder diameter VDI (DIN 69880) 40 mm Maximum power (100/40% duty cycle) 10.9/14.2 kW Maximum torque (100/40% duty cycle) 26/34 Nm Speed range 40 – 10,000 rpm Slide 3 Rapid traverse speed X/Z axis 30/45 m/min Tool resolution Z axis 0.001° Feed force (40% duty cycle) X/Z axis 16/13 kN EQUIPMENT/ACCESSORIES  IRCO ILS-RBK 100/16 short-bar loader  Various main spindle reducers  NC-controlled workpiece retrieval device from both the main and counter spindles The device consists of an NC-controlled *Horizontal axis *Swivel unit *Vertical axis *2-jaw gripper for interchangeable gripper jaws  Conveyor belt for removing workpieces from the machine  8/20 bar coolant system with immersion cooler  Chip conveyor  Oil mist extraction  Control cabinet cooling unit (up to 40°)  Counter spindle slide  Easy-Tool monitor  1 collet chuck for quick-change clamping head size 100 for the main spindle  1 collet chuck for quick-change clamping head size 100, Nova Achsfix for the counter spindle  Approx. 40 various quick-change clamping heads size 100 (complete inventory)  Pneumatic tool changer, ø 100 mm  Approx. 50 various tool holders, fixed and driven (complete inventory)  Mounting elements  Documentation

Condition: good (used), Beam claw, sheet metal clamp, sheet metal claw, beam clamp, sheet metal gripper, material gripper, material gripper, profile steel tongs, plate gripper, lifting claw, lifting clamp -Manufacturer: ip, safety lifting clamp type IPU10/J with pivoting support ring -Clamping range: 50-100 mm -Load capacity: 9 t -Quantity: 1 piece available Kljdpfokm Rm Aox Addol -Dimensions: 380/110/H460 mm -Weight: 35 kg

Condition: good (used), Sheet metal clamp, sheet metal claw, beam clamp, beam claw, sheet metal gripper, material gripper, material gripper Kljdpsdi Smmsfx Addel -Sheet metal claws -Span: 1 to 30 mm -Load capacity: 2,500 kg -Number: 1x terminal available -Price: per piece -Weight: 11 kg/piece

Condition: good (used), Sheet metal clamp, sheet metal claw, beam clamp, beam claw, sheet metal gripper, material gripper, material gripper -Sheet metal claws -Span: 50 to 100 mm -Load capacity: 6000 kg -Quantity: 1 piece available -Price: per piece -Weight: 29 kg/piece Kedpfx Adsdg Snnsdsll

Condition: good (used), Beam claw, sheet metal clamp, sheet metal claw, beam clamp, sheet metal gripper, material gripper, material gripper, profile steel tongs, plate gripper, lifting claw, lifting clamp -Manufacturer: IP, Safety lifting clamp type IPUNZ with swiveling support ring -Clamping range: 0-32 mm -Load capacity: 6 t -Number: 23 terminals available -Price: per piece -Dimensions: 280/100/H455 mm -Weight: 23 kg/pc. Kjdpskm Rnvofx Addell