Used Gripper for sale (739)

Condition: used, Sheet metal clamp, sheet metal claw, beam clamp, beam claw, sheet metal gripper, material gripper, material gripper -Sheet metal claws Lredpfx Ahodi Sluezog -Span width: 0 to 32 mm -Load capacity: 3000 kg -Number: 1x terminals available -Price: per piece -Weight: 14 kg/piece

Condition: used, Turning tool holder, tool holder, turning tool, turning tool holder, tool holder, axial tool holder, driven tool, bar gripper, thread cutting head -Manufacturer: Sandvik, 17 pieces turning tools with tool stand -Socket: Ø 40 mm Lrjdpfegl Dutsx Ahzeg -Various types: see photos, more pictures can be sent -Sale: is only sold as a whole -Dimensions: 400/660/H500 mm -Weight: 25.6 kg

Condition: used, Sheet metal clamp, sheet metal claw, beam clamp, beam claw, sheet metal gripper, material gripper, material gripper -Sheet metal claws -Span width: 0 to 50 mm Lredpfxsdkbfye Ahzsg -Load capacity: 4000 kg -Number: 1x terminals available -Price: per piece -Weight: 21 kg/piece

Condition: used, Beam claw, sheet metal clamp, sheet metal claw, beam clamp, sheet metal gripper, material gripper, material gripper, profile steel gripper, plate gripper Lodegtn Dbopfx Ahzerg -Sheet metal clamp: clamping range up to 85 mm -Load capacity: kg -Dimensions: 300/80 / H330 mm -Weight: 13 kg

Condition: used, Beam claw, sheet metal clamp, sheet metal claw, beam clamp, sheet metal gripper, material gripper, material gripper, profile steel gripper, panel gripper, lifting claw, lifting clamp -Manufacturer: ip, safety lifting claw 6 IP -Clamping range: 0 - 40 mm -Load capacity: 6 t Ledpfx Ahjgtn Dfszjrg -Dimensions: 250/110 / H550 mm -Weight: 26 kg

Condition: used, Beam claw, sheet metal clamp, sheet metal claw, beam clamp, sheet metal gripper, material gripper, material gripper, profile steel gripper, panel gripper, lifting claw, lifting clamp -Manufacturer: Evers, lifting clamp IPHGZ Lsdpfjgtn D Aex Ahzsrg -Clamping range: 0 - 25 mm -Load capacity: 1.5 t -Dimensions: 200/110 / H300 mm -Weight: 8 kg

Year of construction: 1986, condition: used, Beam claw, sheet metal clamp, sheet metal claw, girder clamp, sheet metal gripper, material gripper, material gripper, section steel gripper, panel gripper, lifting claw, lifting clamp, support clamp, crane clamp -Beam clamp: lifting claw type 1160 -Clamping area: see photos -Load capacity: kg -Dimensions: 160/140 / H410 mm Lrodehgkgzopfx Ahzog -Weight: 13 kg

Condition: used, Year of construction: 2002, 17 METRES INFEED. GRIPPER FED. 14 METRES OUTFEED. APS 1015 3 SPINDLE DRILLING MACHINE. KBS 1001 SAWING MACHINE. Lsdpfx Ahox N Ibzszjrg INFEED & OUTFEED CROSS TRANSFERS.

Condition: ready for operation (used), Year of construction: 2004, travel distance X-axis: 600 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 600 mm, controller manufacturer: HEIDENHAIN, spindle speed (max.): 12,000 rpm, spindle motor power: 25,000 W, number of axes: 5, This 5-axis DMG DECKEL MAHO DMC 60U RS5 was manufactured in 2004. Ideal for precision vertical machining, this used machine represents a valuable addition to any workshop. Consider the opportunity to buy this DMG DECKEL MAHO DMC 60U RS5 vertical machining centre. Contact us for more information. Additional equipment • Tool Changer & Magazine: Horizontal Double Gripper / Magazine Type: Chain Magazine / Capacity: 60 Tool Places / Tool Clamping: According to DIN 69872 / Tool Breakage Control: Mechanical Version • Coolant Tank: 900 L • IKZ: Form AD with Paper Band Filter • Measuring Probe: Heidenhain TS 641 (Infrared) • Tool Measurement: Blum Laser for Tool Length & Diameter Measurement Horizontal/Vertical • Rotating Viewing Window Lrsdpfxoyaam As Ahzeg Machine Benefits Technical Machine Benefits • Production hours: 54347 operating hours, 3500 spindle hours • Universal milling head with controlled b-axis • Very well maintained machine operated for high-end applications • Spindle replacement in 2021 at a cost of approximately 40000 euros • Checkbook maintained Extra Information Disc changer and 4 pallets are included Control 3D Haidenhein contouring control "Millplus IT with Millplus IT handwheel" Serviced regularly... excellent condition... new spindle has 3,500 hours

Condition: used, machine/vehicle number: 008158, Max. panel width: 4300 mm Max. panel length: 2200 mm Main saw blade projection: 120 mm Lredpfx Aow Tiv Hjhzeg No of Grippers: 9 Second flexible pusher: yes Panel Rotation Station: yes Thin sheet loading: yes

Condition: new, BRAND NEW MACHINING CENTER HEIDENHAIN TNC 7 digital path control with 19" screen HEIDENHAIN package (motors, measuring systems, and handwheel) X-axis: 650 mm Y-axis: 700 mm Z-axis: 645 mm Table size (diameter): 410 mm Maximum workpiece diameter: 500 mm Maximum spindle speed: 12,000 rpm (oil-cooled with MQL) Spindle taper: SK 40-BIG PLUS (BVD 40) Ljdpfohy Artjx Ahzjrg Maximum spindle motor power: 17 kW ICS – internal coolant supply – 20 bar Rapid traverse X, Y & Z: 30,000 mm/min Positioning accuracy: ± 0.005 mm Repeatability: ± 0.003 mm ATC tool changer with double gripper: 30 positions (optional up to 80 tools) Hinged belt chip conveyor Full enclosure Only inquiries from Germany will be answered.

Condition: new, BRAND NEW MACHINING CENTER HEIDENHAIN TNC 7 digital path control with 19" screen Ledpfx Aefdxhashzerg HEIDENHAIN package (motors, measuring systems, and handwheel) X-axis: 800 mm Y-axis: 700 mm Z-axis: 645 mm Table diameter: 500 mm Interference circle diameter: 600 mm Max. workpiece weight: 300 kg Max. spindle speed: 12,000 rpm (oil-cooled with MQL) Spindle taper: SK40-BIG PLUS (BVD 40) Max. spindle motor power: 17 kW ICS - internal coolant supply - 20 bar Rapid traverse X, Y & Z: 30,000 mm/min Positioning accuracy: ± 0.005 mm Repeatability: ± 0.003 mm ATC tool changer with double gripper: 30 tools (optionally up to 80 tools) Hinged belt chip conveyor Full enclosure Only inquiries from Germany will receive a response /// Only inquiries from Germany will be processed.

Condition: new, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 1,500 mm, rapid traverse X-axis: 30,000 m/min, rapid traverse Y-axis: 30,000 m/min, rapid traverse Z-axis: 30,000 m/min, position of the milling head: Universal-Diagonal-Fräskopf, spindle speed (max.): 6,000 rpm, table width: 1,100 mm, table load: 10,000 kg, table length: 3,100 mm, torque: 1,178 Nm, power: 31 kW (42.15 HP), Equipment: rotational speed infinitely variable, BRAND NEW BED TYPE MILLING MACHINE Control and Motors: HEIDENHAIN TNC 640 digital path control HEIDENHAIN package (motors, measuring systems, and handwheel) IKZ: Internal coolant supply, 36 bar Additional Equipment: Drum-type tool changer with double gripper, 24 positions Double hinged belt chip conveyor (longitudinal), one at the front and one at the rear 4th axis preparation (rotary table) Full perimeter enclosure Accuracies: Positioning accuracy: ± 0.015 mm Repeatability: ± 0.008 mm Lsdpfx Ahoh Ekrtjzerg Only inquiries from Germany will be answered // Nur Anfragen aus Deutschland werden bearbeitet

Condition: new, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 1,500 mm, rapid traverse X-axis: 30,000 m/min, rapid traverse Y-axis: 30,000 m/min, rapid traverse Z-axis: 30,000 m/min, position of the milling head: Universal-Diagonal-Fräskopf, spindle speed (max.): 6,000 rpm, table width: 1,200 mm, table load: 6,000 kg, table length: 1,600 mm, torque: 1,178 Nm, power: 31 kW (42.15 HP), Equipment: rotational speed infinitely variable, BRAND NEW BED TYPE MILLING MACHINE WITH ROTARY TABLE Control and Drives: HEIDENHAIN TNC 640 digital path control HEIDENHAIN package: motors, measuring systems, and handwheel ICS: Internal coolant supply – 36 bar Rotary Table: 1600 x 1200 mm – dual motor drive system Lrodpfx Ahoff Hz Hezjg Additional Equipment: Chain-type tool changer with double gripper, 40 positions Double hinge belt chip conveyor (longitudinal), one at the front and one at the rear Perimetric enclosure Accuracies: Positioning accuracy: ± 0.015 mm Repeatability: ± 0.008 mm Only inquiries from Germany will be answered.

Condition: new, travel distance X-axis: 6,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 2,000 mm, position of the milling head: Universal-Diagonal-Fräskopf, rapid traverse X-axis: 30,000 m/min, rapid traverse Y-axis: 30,000 m/min, rapid traverse Z-axis: 30,000 m/min, spindle speed (max.): 6,000 rpm, pivoting range: 1 °, table length: 7,500 mm, table width: 1,100 mm, torque: 1,178 Nm, table load: 42,000 kg, coolant supply: 36 bar, spindle motor power: 53 W, Equipment: rotational speed infinitely variable, BRAND NEW GANTRY-TYPE MILLING MACHINE Control and Drives: Two HEIDENHAIN TNC 640 digital path controllers – one at the front of the machine and one at the rear in the cabin HEIDENHAIN package (motors, measuring systems, and handwheel) Lodjvrv Suspfx Ahzerg Additional equipment: Chain-type tool changer with dual gripper, 60-tool capacity Dual hinged belt chip conveyors (longitudinal), one at the front and one at the rear Accuracies: Positioning accuracy: ±0.040 mm Repeatability: ±0.008 mm Only inquiries from Germany will be answered.

Condition: used, Year of construction: 2020, operating hours: 2,950 h, Serial number: CAT00315CWKX002xxxx Please contact ATS Norway for more information Please provide reference number upon request: 20569 Specifications: Lodpfx Aswphhhjhzsrg Model year: 2020 Hours: Approximately 2,950 Power: 80.9 kW Weight: 15,400 kg Belt width: Approx. 50 cm Machine width: Approx. 250 cm Certified until: October 2025 Equipment and accessories: TRS 14 Rotary tilt S60 quick release Central grease Excavator bucket and sanding bucket Grader blade Camera behind and on the left side LED bar, additional work light and rotor light Radio/CD Air conditioning / AC State: Minor damage to the cabin (visible in photos) The tilt gripper cassette is defective, one of the cylinders is broken. Description: CAT 315 crawler excavator from 2020 with only approx. 2,950 hours. The machine is certified until October 2025 and comes with both a digging bucket and a sanding bucket. Ready for delivery at short notice Hours: 2950 Own weight: 15400 Total Weight: 15400 Width: 250 Kw: 80,9 Model: 315 Beltegraver m/ tilt og 2 skuffer

Condition: ready for operation (used), Year of construction: 2022, This 6-axis Mitsubishi RV-7FRLM-D robot arm was manufactured in 2011. It features a vertical multiple-joint structure, capable of handling a maximum load of 7 kg with a reach radius of 908 mm. The robot is equipped with an AC servo motor and can be installed on floors, ceilings, or walls. It operates efficiently with a cycle time of 0.35 seconds and has an IP67 protection degree. Consider the opportunity to buy this Mitsubishi RV-7FRLM-D robot arm. Contact us for more information. • Structure: Vertical multiple-joint type • Environmental Specifications: Oil mist • Protection Degree: IP67 • Installation: Floor / Ceiling / Wall-mounted • Degrees of Freedom: 6 • Drive System: AC servo motor (all axes with brake) Ledpfx Ajx Enknehzsrg • Position Detection: Absolute encoder • Load Capacity Maximum: 7 kg/ Rated: 7 kg • Upper Arm: 435 mm • Forearm: 470 mm • Maximum Reach Radius: 908 mm • J1: −240° to +240° • J2: −110° to +130° • J3: 0° to +162° • J4: −200° to +200° • J5: −120° to +120° • J6: −360° to +360° • J1: 288 deg/sec • J2: 321 deg/sec • J3: 360 deg/sec • J4: 337 deg/sec • J5: 450 deg/sec • J6: 720 deg/sec • Maximum Composite Speed: 11000 mm/sec • Cycle Time: 0.35 sec • Position Repeatability: ±0.02 mm • Environmental Conditions Ambient Temperature: 0–40°C /Robot Mass: 67 kg • Allowable Torque • J4: 16.2 Nm • J5: 16.2 Nm • J6: 6.86 NmAllowable Inertia • J4: 0.45 kg·m² • J5: 0.45 kg·m² • J6: 0.10 kg·m² • Tool Interfaces Tool Wiring: • 8 inputs / 8 outputs for gripper • Multi-function gripper & sensor signal cable • LAN × 1 (100BASE-TX)Tool Pneumatic Pipes: • Primary: Ø6 × 2 • Secondary: Ø4 × 8Controller Connected Controller Type: CR800-07VD /Control Type: Standalone

Condition: used, mileage: 299,264 km, power: 315 kW (428.28 HP), first registration: 06/2016, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, emission class: euro6, total width: 2,550 mm, total height: 3,800 mm, loading space length: 6,600 mm, loading space width: 2,480 mm, loading space height: 900 mm, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), parking heater, soot filter, Mercedes-Benz Antos 2543 building material + PK 26001 up to 20 m reach Suspension: air-air Wheelbase: 4.90 m PALFINGER Type: PK26001 LTEK Year of manufacture 2016 4x hydraulic extension 4x hydraulic support points 1x gripper 1x remote control Equipment: - Digital speedometer - Engine brake - Seat heating - M.F.H. - Radio-CD-Aux-Bluetooth-Telephone - Rear view camera device - Alarm system - Lift+steering axle - Lane keeping assistant Lodpfxorqrpms Ahzsrg - Distance meter - Electric windows - Sunroof - Sun visor - Remote control - Trailer coupling (air-ABS-power connection) We are also happy to support you in the area of financing/leasing with our partners. All information is provided without guarantee. Errors and intermediate trade reserved.

Condition: good (used), Turning tool holder, steel holder, turning tool, turning tool holder, tool holder, axial tool holder, bar gripper, thread cutting head, boring bar holder -CNC turning tool holder: 47 pieces turning tools DIN 69880 -Hole: Ø 60 mm Lrjdjwytz Uspfx Ahzsg -Different types: see photos, parts list -Shipping/Price: only complete -Transport dimensions: 1200/800/H185 mm -Weight: 284 kg

Condition: ready for operation (used), Year of construction: 2007, controller manufacturer: HEIDENHAIN, This 3-axis Sigma Leader 6 vertical machining center was manufactured in 2007. It features extensive travel capabilities with X-axis at 1250 mm, Y-axis at 810 mm, and Z-axis at 630 mm. Rapid traverse rates reach up to 50 m/min, and it includes a high-capacity tool magazine with 40 positions. If you are looking to get high-quality milling capabilities, consider the Sigma Leader 6 machine we have for sale. Contact us for more information about this machine. • Axes: 3 / current spindle hours: approximately 33000 / x-axis travel (longitudinal): ranges from 1250 mm to 2000 mm / y-axis travel (transverse): 810 mm / z-axis travel (vertical): 630 mm / b-axis travel (swivel): -60° to +105° / c-axis travel (rotary table): 360° / x/y/z rapid traverse: ranges from 40 m/min to 50 m/min / b/c rapid traverse: ranges from 40 rpm to 50 rpm / acceleration x/y/z: ranges from 5000 mm/sec² to 10000 mm/sec² / acceleration b/c: ranges from 3. 5 rad/sec² to 8. 8 rad/sec² / guides: linear with sliding block with triple circulation of preloaded balls / pallet changeover time: 3 seconds (5-axis) • Power supply: 400v 50hz 3-phase line / power rating: ranges from 35 kw to 60 kw / rated current: ranges from 60 a to 105 a • Compressed air pressure: 6 bar / compressed air consumption: 150 nm³/h • Machine color: gray ral 7008 / protective cover color: yellow ral 1004 / workstation lighting: 2 or 4 / sound pressure level: 77 db(a) to 79 db(a) (standard, 15000 rpm) • Tool holder: n. 40 din 69871, n. 40 din 69871 (bt40), hsk-a63 din 69893-1 / max. Available power: 27 kw / max. Available torque: 235 nm, 158 nm, 86 nm / programmable indexed spindle angle positions: electronic with 3600 positions • Measuring system: heidenhain measuring system, electronic fold commutator / positioning accuracy (x/y/z): 0. 008 mm / positioning spread (x/y/z): 0. 006 mm / average reversal error (x/y/z): 0. 002 mm Ljdpfxjx D Nafs Ahzorg • Magazine type: chain magazine with 2 directions / number of positions: 40 (standard) - 50 (optional) / tool selection: "random" / tool changer: double-gripper arm, electromechanically driven / min. Tool change time: 1. 5 seconds / chip-to-chip time: 4. 5 seconds / max. Tool weight: 8 kg / max. Tool diameter: 80 mm / max. Tool length: 350 mm / max. Tool dimensions: 300 mm • At low pressure with oil emulsion: 10 nozzles around the spindle, max. 5 bar at 100 l/min / at high pressure with oil emulsion through the spindle (option): 15 bar at 15 l/min or 30 bar at 30 l/min / chip mixing: 2 parallel screws on the two long sides of the table and a side chip conveyor / cooling system filtration: 60μ filter system with 2 filter inserts and manual bypasscooling system filtration: 60μ filter system with 2 filter inserts and manual bypassinner cooling through spindle (IKZ)

Condition: used, Year of construction: 2014, Approx. 97 million prints Format: 94 x 64 cm (37 x 25 inches) short-term available Technical data: Lsdexb U Ayopfx Ahzjrg PQC-S control console with touchscreen KOMORI KHS-AI system for makeready time optimization KOMORI Smart Feedback for density adjustment and waste reduction Automatic washing and ink presetting KOMORI PSP automatic format and thickness adjustment AMR (Automatic Make Ready) for preset job changes Quick start function for production Remote control of register and transfer cylinder adjustment Automatic sheet format adjustment Pneumatic stop fingers Mechanical and ultrasonic double sheet detection in the feeder S-APC: semi-automatic plate change (no plate bending required) KOMORI DSC high-performance sheet guide with exclusively double-size countercylinder and transfer cylinders KOMORImatic film dampening unit technotrans alpha.c dampening system Antistatic blower at the feeder head Side blower (feeder) 2-zone suction belt delivery table Delivery with sheet troller/smoother Sheet brake with infinitely variable speed adjustment Blowing bars above the delivery pile Antistatic bar above the delivery pile Adjustable fans for precise paper travel and pile formation Weko AP160 printing powder device KOMORI PDC LII, online density measurement KOMORI PCC CIP3/4 data conversion software Max. sheet format: 640 × 940 mm Min. sheet format: 297 × 420 mm Max. print format: 620 × 930 mm Plate format: 700 × 945 mm (thickness: 0.30 mm) Blanket size: 800 × 955 mm (with bars) Substrate thickness: 0.04–0.6 mm Gripper margin: 10 mm Plate clamping margin: 45 mm Max. printing speed: 13,000 sheets/hour Stack height feed: 800 mm Stack height at delivery: 900 mm (*depending on paper, ink, and operating conditions) Length: approx. 8,169 mm Width: approx. 3,320 mm (without peripheral devices) Power consumption: approx. 53 kW / 50 Hz (without peripheral devices)

Condition: used, machine/vehicle number: 008177, Max. panel width: 4300 mm Max. panel length: 4300 mm Main saw blade projection: 125 mm No of Grippers: 7 Ljdpfsx A Tamex Ahzsrg

Condition: used, maximum load weight: 28,101 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 11/2011, loading space length: 13,625 mm, loading space width: 2,480 mm, loading space height: 2,700 mm, loading space volume: 91 m³, Equipment: ABS, * VEHICLE NUMBER: 2566 ---* Exterior features: * Galvanized chassis * Gripper edges for rail loading on pocket wagons * 4 pairs of RoRo ferry lashings * Additional DUOMATIC air connection * Document box Ledpfxoycnd Us Ahzorg * ECE and GGVS markings ----* Technology: * BPW axles with drum brakes * Wheelbase 1410/1310 * Lift axle on 1st axle * Tires 385/65 22.5 * Double-decker with 22 loading beams * Load securing rails * Fifth wheel height 1,150 mm * Unladen weight 7,899 kg ---* Rental offer: €39 per day, term as desired, flexible return possible at no extra cost * Delivery to your location possible. Trade-in/leasing/financing. We make it possible!

Condition: new, Year of construction: 2024, The fully automatic robotic palletizing system is developed and manufactured by our company. Robotic palletizing systems are able to meet the needs of a very diverse range of sectors. * Flour factories, * feed factories, * fertilizer factories, * cement factories, * construction chemicals factories, Ljdjuua Hqopfx Ahzsrg * legume factories, * Packaged products, * Bagged products, * Transportable products, Features and benefits : - Faster palletizing, - Standard number of pallets, - Saves work, energy and time, - Correct placement thanks to automatic tolls, - High robustness on the pallet with appropriate loading sequence, - Can be arranged in various configurations; rows of pallets with free programming, - 400-5000 packages/hour performance, - From 5 to 50kg standard packages, - Space requirement for installation is small and flexible, - User friendly - low maintenance, Basic elements high palletizer : * Gripper for Robot, * Conveyor belt, * roller conveyor, * Bag smoother, * Rotation unit, * loading platform, * stretch wrapper, * pallet feed unit, * Empty pallet unit, * Electrical & Automation & PLC, * Fence and operator protection equipment,

Condition: used, Year of construction: 2026, New tree shear by Westtech, model CL260 Riskzone 50 m – quick-coupler system Pladdet CW10 – Woodcracker – = Further information = Year of manufacture: 2026 Intended use: Forestry Please contact Miguel Cubas for more information. = Company information = Lsdex S Nx Tepfx Ahzorg We are located between Antwerp and Brussels along the A12 motorway, near the port of Antwerp. Opening hours: Monday to Friday continuously from 8:30 am to 7:00 pm.