Used Gripper for sale (735)

Condition: excellent (used), power: 141.2 kW (191.98 HP), operation weight: 25,100 kg, chain condition: 70 %, Year of construction: 2017, operating hours: 7,494 h, Equipment: air conditioning, DOOSAN DX235LCR-5 Year: 2017 Operation hours: 7.494 hrs ROPS Radio back- drive camera Airco Hydr. 2 piece boom Itsdpfsxlin Ejx Ag Nen Stick : 3m central lubrication all hydr. lines (hammer-, gripper-, scissor-) Oil Quick 70/55 Schnellwechsler 1x Bucket with 1m width U/C: 70% good trackshoes 600 mm width engine with 141.2kW CE Operation weight: 25.1 to.

Condition: used, Year of construction: 2014, Approx. 97 million prints Format: 94 x 64 cm (37 x 25 inches) Available at the end of November 2025 Technical data: PQC-S control console with touchscreen KOMORI KHS-AI system for makeready time optimization KOMORI Smart Feedback for density adjustment and waste reduction Automatic washing and ink presetting KOMORI PSP automatic format and thickness adjustment AMR (Automatic Make Ready) for preset job changes Quick start function for production Remote control of register and transfer cylinder adjustment Automatic sheet format adjustment Pneumatic stop fingers Mechanical and ultrasonic double sheet detection in the feeder Itsdpfexb U Ayex Ag Njn S-APC: semi-automatic plate change (no plate bending required) KOMORI DSC high-performance sheet guide with exclusively double-size countercylinder and transfer cylinders KOMORImatic film dampening unit technotrans alpha.c dampening system Antistatic blower at the feeder head Side blower (feeder) 2-zone suction belt delivery table Delivery with sheet troller/smoother Sheet brake with infinitely variable speed adjustment Blowing bars above the delivery pile Antistatic bar above the delivery pile Adjustable fans for precise paper travel and pile formation Weko AP160 printing powder device KOMORI PDC LII, online density measurement KOMORI PCC CIP3/4 data conversion software Max. sheet format: 640 × 940 mm Min. sheet format: 297 × 420 mm Max. print format: 620 × 930 mm Plate format: 700 × 945 mm (thickness: 0.30 mm) Blanket size: 800 × 955 mm (with bars) Substrate thickness: 0.04–0.6 mm Gripper margin: 10 mm Plate clamping margin: 45 mm Max. printing speed: 13,000 sheets/hour Stack height feed: 800 mm Stack height at delivery: 900 mm (*depending on paper, ink, and operating conditions) Length: approx. 8,169 mm Width: approx. 3,320 mm (without peripheral devices) Power consumption: approx. 53 kW / 50 Hz (without peripheral devices)

Condition: used, Year of construction: 2014, controller manufacturer: Sonstige, controller model: Datron CNCv9, _____ Description: Year of manuf. : 2014 Control : Sonstige Datron CNCv9 Speed : 60000 rpm Movement X/Y/Z : 520/650/240 mm Itsdpfxjxfylne Ag Nsn In Generel: Year of manufacture:2014 Control system:Datron CNCv9 Speed:6,000 - 60,000 rpm X/Y/Z:520/650/240 mm Spindle: Technology:HF spindle Speed range:6,000 - 60,000 rpm Tool holder:6 mm collet chuck Tool clamping:Automatic with compressed air NC rotary table: Technology:Precision axis Type:PDA 360 Centre height:102 mm Workpiece diameter max.:195 mm Chuck:3-jaw chuck, pneumatically actuated Automation: Technology:Pick-and-place Lifting cylinder:Z-axis Gripper:1-fold gripper Workpiece carrier system:2x carrier plate Equipment: Tool magazine:15 stations Tool measurement:Tool setter Workpiece measurement:3D probe (X/Y/Z) Fire extinguishing system:Kraft & Bauer Set-up mode:Electronic handwheel Coolant system:Datron coolant system with ethanol

Condition: ready for operation (used), Year of construction: 2018, operating hours: 131 h, This RETHINK Robotics Sawyer was manufactured in 2018. It features a Schunk gripper arm with an adapter plate and was used only for testing. With a maximum reach of 1260 mm and a handling weight of up to 4 kg, it has accumulated only 131 machine hours and 18 runtime hours. Contact us for more information about this machine. Application Types Isdpfxexb E Hvo Ag Njtn Robotics

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, working width: 1,240 mm, wire diameter (max.): 12 mm, type of input current: AC, Machine Overview: Schlatter MG900 MG12 Mesh Welding Machine - "Offical Expose upon request" The Schlatter MG900 is a powerful and refurbished resistance welding machine, specifically designed for the production of wire mesh panels. With a width capacity of up to 1250 mm and a length of 3000 mm, it handles wire diameters of up to 12 mm. This machine has undergone extensive modernization to deliver maximum efficiency and flexibility in production. Main Components • LV - Longitudinal Wire Feeder o Upgraded with a high-precision servo axis o Hopper magazines for longitudinal wires up to 3000 mm • MG12.4 - Mesh Welding Unit o Equipped with 3 to 6 transformers. o Up to 12 Schlatter welding presses with a capacity of 5 kN •QFD34 - Cross Wire Feeder o Allows for double cross wire insertion for two different cross wire diameters / length, *Note: The second level is not yet installed in the photos • MVL - Mesh Extraction Unit o Controlled by a new MS2N Servo Motor from Bosch Rexroth CrtlX o Equipped with four Schlatter mesh grippers (expandable upon request) • MS - Mesh Stacker o Automatically stacks mesh panels with a travel path of up to 3100 mm • Control and Power Cabinet o Siemens S7 TIA Control System o Rexroth CrtlX Components for high-dynamic motion control Ijdpjvtg Sbsfx Ag Notn Specs: • Mesh Width (Transverse Wire Length) max. 1250mm / min. 200mm • Mesh Length (Manual Loading) max. 3200mm / min. 300mm • Distance Between Outer Longitudinal Wires max.1200mm • Longitudinal Wire Spacing 20 - 150mm • Cross Wire Spacing min. 12.5mm • Longitudinal Wire Diameter 2.0 - 10.0mm • Transverse Wire Diameter 2.0 - 8.0mm • Maximum Number of Longitudinal Wires max.24

Condition: good (used), Year of construction: 2009, Used horizontal panel dividing saw Manufacturer: Holzma Model: Profi HPP 380/43/43/Plastic Year of manufacture: 2009 Plastic configuration Includes the following components: + Special gearbox for saw carriage (0.1–150 m/min) + Frequency control for 21.0 kW motor + Spray unit for main saw (minimum quantity lubrication) + Special 2-finger narrow part gripper + Optimized extraction in saw carriage and pressure beam + Cleaning bar in the chip channel + Adjustable light sensor for saw carriage with integrated air jet device + Pressure boost for air cushion table blower. Stepless adjustment via rotary control. Cutting length: 4300 mm Cutting width: 4300 mm Saw blade projection: 95 mm Saw carriage feed rate: 0.1–150 m/min Automatic pressure beam height control Automatic cutting height adjustment Adjustable pressure beam contact pressure Adjustable gripper (clamp) contact pressure Gripper (clamp) release Machine table (saw body) fully equipped with air nozzles Angle alignment device Main saw motor (frequency controlled): 21 kW Scoring saw motor: 2.2 kW Combi profile rail (double-track elements): 9 pcs Grippers (2-finger): 7 pcs Optional equipment Additional combi profile rails: 5 pcs Rollers, rubber-coated for sensitive materials 9 kerf closer bars (4300 mm) Narrow part grippers: 2 pcs Floating-mounted grippers: 8 pcs Labelling package includes Labeling with part graphics Labeling software Label printer Pica 108 Optimization software Material-dependent parameters Data transmission online & via USB port Synchronous cutting Multiple cutting Isdpfx Agsxc E Txj Njtn Automatic pressure adjustment

Year of construction: 2009, condition: used, Used machine Year of manufacture: 2009 Condition: reconditioned The machine concept is extremely simple. The workpiece is placed into the machine. A quickly adjustable stop with pneumatic locking centers the workpiece within the machine. After activating a foot switch, the workpiece is pneumatically clamped and automatically fed to the drilling unit (30 m/min). The vertical spindles drill from below, so the resulting chips do not remain on the workpiece as they would with a machining center. The horizontal spindles operate on two sides of the workpiece. The workpiece can be of any length, as it is fed to the drilling unit (X-axis). The drilling spindles are individually or collectively freely programmable and move along the Y-axis. The drilling depth and the horizontal drills are controlled via the Z-axis. Once all drilling operations are completed, the workpiece is either returned to the loading side or, on request, discharged to the outfeed side. Unlike conventional machining centers, where the workpiece is clamped with vacuum and the vacuum clamps must be adjusted to the workpiece size, this step is completely eliminated in the 3-axis controlled point-to-point drilling machine. Advantages: - High processing speed - Excellent price-performance ratio - Minimal space requirements All drilling operations can be carried out in the smallest of spaces: - Line boring - Construction drilling - Fitting drilling - Cabinet connector drilling The drilling head is equipped with 7 vertical drilling spindles and 1 horizontal double drill spindle. Equipment: - Welded machine frame - Drilling head with 7 vertical drilling spindles and 1 horizontal double drill spindle - 3-axis control: X: NC-controlled feed of the panel via a cross-over pneumatic clamping gripper Y: NC-controlled movement of the drilling head Z: NC-controlled drilling spindle depth adjustment - TRK precision guides - Pneumatic segmented pressure beam above the drilling unit - Pneumatic roller hold-downs in the loading area - Pneumatic clamping gripper for transport - Pneumatically lockable side stop with rollers - Control via PC running Windows XP (1 GB Flash Memory) - 8'' color display - Alphanumeric multifunction keyboard incl. mouse - Network card - USB interface Technical data: Number of controlled axes: 3 Maximum panel width: 1,000 mm Maximum drilling width: 800 mm Maximum feed speed (X-axis): 30 m/min Drill spindle speed: 3,400 rpm Maximum drill bit diameter: 35 mm Maximum overall drill bit length: 70 mm Drill bit shank: 10 mm clamping diameter with flat Isdpowmhmfsfx Ag Netn Connected load: 2.5 kW Extraction port diameter: 100 mm Required pressure: 6 bar Working height: 900 mm Fold-out roller support on infeed side, 500 x 750 mm Machine dimensions (LxW): 1,650 x 1,920 mm Availability: short-term Location: NRW (North Rhine-Westphalia)

Condition: good (used), Year of construction: 2000, operating hours: 69,000 h, functionality: fully functional, clamping force: 3,000 kN, screw diameter: 70 mm, For sale is an Engel injection moulding machine, type ERC 43/1-EA, including robotic handling. The machine is in good condition and ready for immediate operation. The machine is currently in operation and can be inspected on site. Professional dismantling and loading included. Technical data: Year of manufacture: 2000 Operating hours: 69,000 - Clamping unit: Clamping force: 3,000 kN Platen size: stationary 1,050x980 mm, moving 1,050x900 mm Itedpfxsxc D Dcs Ag Non Min. mould installation height: 350 mm Max. platen distance: 1,200 mm 2 core pulls 2 air valves Centre ring diameter: 160 mm - Injection unit: Screw diameter: 70 mm Max. shot volume: 1,155 cm³ Specific injection pressure: 1,779 bar Temperature release up to 500°C - Handling: X: 500 mm Y: 800 mm Z: 1,880 mm C-axis: 0-90° pneumatic 2 suction/gripper circuits Freely programmable I/Os Conveyor belt 4,000 x 600 mm, height-adjustable Predefined program sequences, sprue separation, quality part placement Transport and loading can be organised Europe-wide at extra cost upon request. Prices are exclusive of VAT. Inspection is possible by appointment. Contact us—our team will be happy to assist you. Part exchange or trade-in possible! Machinery Purchase/Sale BUY / SELL PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality yet affordable metalworking machine for your production? Or are you looking to sell your machine? For further information or to contact us, please visit our website.

Condition: used, Year of construction: 2021, controller manufacturer: Siemens, controller model: 828 D, _____ Description: Year of manuf. : 2021 Control : Siemens 828 D Speed : 12000 rpm Iodsxfflgspfx Ag Njtn Movement X/Y/Z : 550/550/510 mm Tool holder : SK40 Spindle: Technology:Inline spindle Speed:12,000 rpm Power (max.):13 kW Tool holder:SK40 Work table: Clamping surface:850 x 650 mm Table load (max.):600 kg General: Tool magazine:24 stations with double gripper Rapid traverse in X/Y/Z:24 m/min Features/Accessories: Chip management:Chip conveyor Coolant management:IKZ system with 20 bar Tool measurement:Renishaw, TS27R Workpiece measurement:Renishaw 3D measuring probe (infrared) Additional equipment:Mechanical preparation for oil mist separator

Year of construction: 2023, operating hours: 50 h, condition: ready for operation (used), General Data Measurements width 1300 mm Measurements depth 1900 mm Measurements height 2500 mm Machine weight 2000 kg Itjdpfxoxbulus Ag Njn Main Drive Number of axis 6 Additional Equipment Vice Pallets: 18 Safety Package: Movable safety fence and safety software Shelving System: Adjustable levels for up to 18 pallet spaces Valve Terminal: For controlling external elements This 6-axis WU Automation RZ-3/35 was manufactured in 2023. A versatile robot cell with a compact design, it features a 6-axis robot capable of handling up to 35 kg. It includes an intuitive graphical interface, Schunk NSR 100 and JGP 125 gripper systems, and a safety package with movable safety fence. Ideal for efficient, flexible operations with minimal setup times. Compatible with all Hermle machines. If you are looking to get high-quality automation capabilities consider the WU Automation RZ-3/35 machine we have for sale. Contact us for more information. Application Types Other Automation Equipment

Condition: good (used), Year of construction: 2008, 5-axis CNC machining center Manufacturer: Willemin Model: W 408 MT Year: 2008 Itodpfx Aexdm Ereg Nsn Control: Fanuc Series 16i MB Max workpiece diameter: 32 mm Spindle speed: up to 30,000 rpm Spindle interface: HSK-E40 48-position tool changer 5 axes + gripper Travel distances: X 250 / Y 200 / Z 300 mm + Bar feeder LNS Hydrobar Express 332 + Coolant filtration system + Oil cooling / spindle cooling + High-pressure coolant (IKZ) Operating hours: approx. 75,000 hrs. Over the past years, more than €50,000 has been invested in the machine. Among others, the following parts were replaced/repaired: Main spindle - tool interface Spindle drawbar Tool changer gearbox Ball screws X/Y/Z/U axes Z-axis motor U-axis motor The machine has been regularly maintained and was fully integrated in production until recently.

Condition: excellent (used), Year of construction: 1977, equipped with: Itjdpfefzr Aqex Ag Nen 1 pce. BIHLER auccustic cabine 1 pce. gripper feeder system right hand side 1 pce. Eccentricpress 70 kN 3 pcs. Standard slide units 2 pcs. Narrow slide unit 1 pce. Camshaft working range: wire diameter range: 0,5 - 3,5 mm strip metal width: up to 32 mm feeding length: up to 170 mm output: up to 250/min.

Year of construction: 2009, condition: used, Used machine Year of manufacture: 2009 Condition: well-maintained Point-to-point drilling machine Working width: 800 mm with grooving unit Drilling head with 7 vertical drilling spindles and 1 horizontal double drilling spindle in X direction 1 drilling spindle in Y direction Grooving saw unit in X direction 3-axis control system X: NC-controlled feed of the panel via cross-over pneumatic clamping gripper Y: NC-controlled drilling movement Z: NC-controlled drill spindle depth adjustment Pneumatic roller hold-downs in the infeed area Pneumatic clamping gripper for transport DXF interface 15" color screen Keyboard including mouse Network card USB interface Max. panel width: 950 mm Max. drilling width: 800 mm Max. machining width for back panel grooves: 600 mm Max. feed speed (X axis): 30 m/min Max. drill diameter: 35 mm Max. overall drill length: 70 mm Connected load: 2.5 kW Extraction port: 100 mm Required pressure: 6 bar Working height: 900 mm Machine dimensions (LxW): 1650 x 2100 mm Availability: approx. October 2025 Itedpfx Asw Tfxqjg Non Location: Selfkant

Condition: used, mileage: 435,265 km, power: 294 kW (399.73 HP), overall weight: 18,000 kg, fuel type: diesel, axle configuration: 2 axles, gearing type: automatic, emission class: euro5, first registration: 06/2012, next inspection (TÜV): 08/2025, Equipment: air conditioning, crane, Very well-maintained MAN TGS 18.400 tractor unit with a Palfinger PK 22002 EH E. The crane has 6 hydraulic extensions (20.30 m with 700 kg and max. 5,550 kg) and radio remote control as well as a 5 + 6 control circuit for rotary servo, gripper, tongs, etc. The vehicle has been fully serviced by MAN. ? Palfinger PK 22002 EH ? 6x hydraulic extensions ? Working height ? 12.20 m = 3,840 kg ? 15.80 m = 2,750 kg ? 18.40 m = 1,940 kg ? 20.30 m = 1,460 kg ? Radio remote control ? 5 + 6 control circuit ? Rotary servo ? Lateral extension ? Max. 5,550 kg ? 4.10 m = 3,840 kg ? 6.10 m = 2,420 kg ? 8.10 m = 1,690 kg ? 10.30 m = 1,250 kg ? 12.50 m = 980 kg ? 14.70 m = 810 kg ? 16.90 m = 700 kg ? 4x hydraulic support ? Diff lock ? Automatic air conditioning ? Additional blind spot camera ? Electric windows ? Radio CD ? German vehicle from 1st owner ? Fully serviced by MAN ? Trailer from optional for an additional charge ? Financing possible through our partner banks, we are happy to help you. Isdpfjwil Hbox Ag Njtn We expressly reserve the right to sell the item prior to sale, as we also offer this item on other portals. Information on accessories is without guarantee. Subject to changes, prior sale or errors. We offer and strongly recommend a viewing and inspection so that the buyer does not have any false impressions about the condition and suitability. Viewings and inspections are possible at any time by appointment and are expressly desired.

Condition: like new (used), Year of construction: 2024, functionality: fully functional, machine/vehicle number: 1791, MATEC 30HV/NC X = 2,000 mm Y = 825 mm Z = 800 mm / horizontal Z = 675 mm / vertical - 1-axis CNC swivel head Swivel radius 300 mm, swivel angle max. +/- 105 degrees Direct path measuring system +/-3, optionally continuous or indexed with clamping Clamping forces: 2,400 Nm unclamped, 4,200 Nm clamped - Electronic handwheel (portable) - Remote diagnosis / remote maintenance - Tool magazine with 48 positions - Additional tool magazine with 216 positions Fixed tool magazine for loading the internal tool changer of a machine tool. Including: - Linear and rotary axes with drives - Controllers and sensors - Gripper for tool holder SK40 - Sheet steel enclosure Iedoxg D Atjpfx Ag Nstn - 6 tool levels for storing up to 216 tools with SK40 holders D = 80 mm or D = 160 mm if adjacent slots are free, comprising: 40 pcs. with L = 430 mm 64 pcs. with L = 260 mm 112 pcs. with L = 160 mm Maximum tool weight: 10 kg - Tool loading and unloading via tool flap - Transfer to machine via double gripper - Tool data entry via the machine operating panel, selection of tool positions via the operating panel of the additional magazine - Option: Operating panel for tool data entry at additional magazine - Additional price for motor spindle 9,000 rpm Motor spindle with 30 kW (40% duty cycle) 17 kW (100% duty cycle) Torque 191 Nm (40% duty cycle) 108 Nm (100% duty cycle) - Internal coolant supply 20 bar - Internal coolant supply 40 bar - Compressed air to external nozzles - Internal compressed air through tool - Rotoclear - Automatic safety doors - HOWIMAT CNC 220.2/TMI-50 rotary table 1-axis precision indexing table with direct drive Indexing accuracy deviation max. +/- 10 seconds Radial/axial runout deviation max. +/- 0.003 mm - Single rotary union for rotary table or counter bearing - Zero-point clamping system integrated in the machine table, without draw studs and cover. - Tool breakage monitoring - Fully enclosed work area with roof - Bellows with steel lamellae - Direct measuring system X-, Y-, Z-axis - Chip conveyor - Rinsing gun - Centralized oil lubrication - Work area lighting - Installation elements

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, Fully automatic from feeder to trimmer configuration: • 1 cover feeder • 1 horizontal sheet feeder • 6 vertical sheet feeders • Control panel with main operating unit • Stitching machine with wire transport drive • Trimmer with trimmer infeed Technical data: Maximum untrimmed format: 320 - 350 x 460 mm Maximum trimmed format: 340 x 450 mm Maximum cutting thickness (single stream): 12 mm Max. cutting thickness (double stream): 1/2x die width Maximum stitching thickness: 6 mm Maximum front trim: 50 mm Maximum head and foot trim: 50 mm Stitching heads: maximum 4 Hohner narrow stitch heads Max. pile height of vertical feeders: approx. 250 mm (paper-dependent) Sheet opening – vacuum sucker: min. 6 mm trailing edge, 8 mm leading edge Sheet opening – gripper: max. 20 mm leading or trailing edge Speed: 2,000 – 10,000 products/h Mains voltage: 400V 3~ Mains frequency: 50/60 Hz Power consumption, max.: approx. 15 kW Itodpfou Ecl Ssx Ag Non

Condition: good (used), Year of construction: 2008, 5-Axis CNC Machining Center Iodpfexdmw Ujx Ag Notn Manufacturer: Willemin Model: W 408 MT Year: 2008 Operating hours: approx. 45,000 hrs Control: Fanuc Series 16i MB Max. workpiece diameter: 32 mm Spindle speed: up to 30,000 rpm Spindle interface: HSK-E40 48-position tool changer 5 axes + gripper Travel paths: X 250 / Y 200 / Z 300 mm Includes: + LNS Hydrobar Express 332 bar feeder + Coolant filtration system + Oil cooling / spindle cooling + Internal coolant supply (IKZ) The machine will remain in production until the end of September. It has been regularly maintained and is fully operational. Validation protocol from 01/2023 available.

Year of construction: 2006, condition: excellent (used), Bobst Autoplatine Speria 106 E STANDARD EQUIPMENT MACHINE - Centerline system for quick job changeover. - Electronic sheet travel monitoring system. - Adjustable centering at the stripping station. - Control cabinet air conditioning unit. - Bobst electronic control system C.U.B.E. (Control Unit Bobst Electronic). This microprocessor-based Bobst system allows the operator to easily manage, visualize, and monitor the machine’s various functions and components. - Main motor with frequency inverter control. FEEDER - Pile tray with handle for easy manual lateral alignment during production. - Synchronization device ensuring proper sheet arrival to the front lays when the machine is stopped. - Automatic pile lifting controlled by pressing foot. - Rear pile guides (operator side and opposite operator side). - Adjustable side blowers with Centerline markings. - Suction unit. FEED TABLE - Feed table with anti-static stainless steel covering. - Feed table entrance equipped with lateral ramps. - Four front lays, pairwise adjustable, with front register control. - "Pull" guide (operator side), adjustable with Centerline markings and side register control. - Double sheet detector. - Support plates at platen station entry. - Sheet hold-down mechanism (guides sheets to front lays). - Upper frame with manual lifting device. - Upper transport system for paper, paperboard, and corrugated board. - Transport belts with lateral guides and automatic tensioning system. Itjdpfx Agjxl Talo Non PLATEN - Gripper reopening device. - Centering and locking for equipment. - Locking the chase to the upper beam. - Cutting force measurement with strain gauge. 1 synthetic supporting plate. 1 upper chase: fixed bottom plate. 1 cutting plate. WASTE STRIPPING STATION - Air-cylinder-driven upper frame lifting. 1 upper pull-out frame (with crossbars and clamps). 1 lower pull-out frame. DELIVERY - Pile tray. - Front jogger. - Adjustable rear and side joggers with Centerline markings. - Braking brush. - Manual non-stop rack. AVAILABLE EXTRAS B MACHINE 1 B-1 Raised machine base C FEEDER 1 C-4 Manual non-stop device E PLATEN 1 E-5 Compensating plate 1 E-55 Micro-adjustable supporting plate centering F WASTE STRIPPING STATION 1 F-31 Quick-lock device for the upper pull-out frame

Condition: good (used), Year of construction: 2011, machine/vehicle number: 2212.287, Automatic panelsaw Schelling Typ:FH 6 430 Maskin nr:221.287 År:2011 Panel beam saw Schelling with automatic, rear-feed,lifting table. For sawing board material, chipboard, MDF, Plywood, Board, Laminate etc. Techn info: Software MCS Evolution 2.0, SPS, Soft-SPS-Siemens WinAC Operating system WINDOWS XP PC with keyboard and mouse TFT monitor 17" Cutting length 4300mm, automatic detection of the start of the plate Cutting width 4300mm Machine accuracy of the cut length 3m +-0.1mm Positioning accuracy measured at input +-0.1mm Max diameter saw blade 460mm, spindle 30mm Pre-scoring blade 200mm, spindle 20mm motor operation is set from the control console Max panel thickness 120mm Panel stack aligner Main saw blade motor 27kw Saw blade over table 135mm Safety curtain Air cushion table with 3pcs air ball nozzles, radial ventilator fan Table sizes 2650x850mm 620x850mm 2650x2550mm Pressure beam with automatic adjustment of pressure to cut length and package height Package straightener before and after the pressure beam Max package height 120mm (incl. sum of curvature and board thickness tolerance) Pusher with 12 grippers Max clamp opening (gripper) 133mm Min-max force package straightener 400/2000N Speed saw carriage forward 6-150m/min Speed saw carriage back 150m/min Forward feed speed (pusher) up to 25m/min (according to EC Europa EN1870-13) other countries 80m/min Speed feeding back up to 80m/min Push-off device 3 pcs Lift table length x width 4350x2550mm Hydraulic unit Standard version 1600mm lifting height 1.25/2.5m/min raising speed, 1.25/5m/min lowering speed Maximum load 1200 kg/m2 total 9 tons Roller track driven rollers, frequency controlled for stack on lifting table 4100x2600mm Max stack weight 6500 kg Max stack length 1060mm Slots for forklift 4 pcs, distance in the middle 1200mm, slot width 300mm Light curtain for personal protection Roller conveyor driven for package frequency controlled input to lifting table left 5600x2600mm max load 6500kg Roller conveyor driven for packages frequency controlled input to lifting table right 5600x2600mm max load 6500kg Slots for forklift 2 pcs, center distance 900mm, slot width 400mm 2 positioning stops with roller for stack alignment Light curtain (double beam) for personal protection Roller table after saw depth 4300mm, free-running ployamide rollers Angle stop at the rolling table Infeed guide two-lane (beam length 7200mm) 2-sided hardened precision guides rack and pinion drive, two-sided Input carriage (pusher) gear rack servo drive, non-contact measuring system Gripper, (scissor clamps) in pusher 12 pcs Automatic adaptation of the clamping force to the package height (progressive clamping force) can be set to 0 Pusher for panels thickness greater than 6mm,material thinner than 6mm is fed manually Central cleaning system feed trough (pusher) Compressed air 6-8 bar, approx. 1600l/min Power 38 kw, 70 A. 3x400 volts, 50 Hz, operating voltage 24 VDC Dust extraction 4000m/h, air speed 30m/s Diameter connection 80mm (angle connection), 120mm /pressure beam), 150mm (sawdust channel) Itsdotk It Sepfx Ag Nen Total setup area without driven roller conveyors including protective grid approx: 11650x7300mm Driven roller tracks left-right 5500+5500mm Stock no: 2002125BXACEO Subject to incorrect technical data presented

Condition: used, mileage: 435,256 km, power: 294 kW (399.73 HP), first registration: 06/2012, overall weight: 18,000 kg, fuel type: diesel, axle configuration: 2 axles, next inspection (TÜV): 08/2025, gearing type: automatic, emission class: euro5, Equipment: ABS, electronic stability program (ESP), Very well-maintained MAN TGS 18.400 tractor unit with a Palfinger PK 22002 EH E. The crane has 6 hydraulic extensions (20.30 m with 700 kg and max. 5,550 kg) and radio remote control as well as a 5 + 6 control circuit for rotary servo, gripper, tongs, etc. The vehicle has been fully serviced by MAN. ? Palfinger PK 22002 EH ? 6x hydraulic extensions ? Working height ? 12.20 m = 3,840 kg ? 15.80 m = 2,750 kg Iodswil E Repfx Ag Notn ? 18.40 m = 1,940 kg ? 20.30 m = 1,460 kg ? Radio remote control ? 5 + 6 control circuit ? Rotary servo ? Lateral extension ? Max. 5,550 kg ? 4.10 m = 3,840 kg ? 6.10 m = 2,420 kg ? 8.10 m = 1,690 kg ? 10.30 m = 1,250 kg ? 12.50 m = 980 kg ? 14.70 m = 810 kg ? 16.90 m = 700 kg ? 4x hydraulic support ? Diff lock ? Automatic air conditioning ? Additional blind spot camera ? Electric windows ? Radio CD ? German vehicle from 1st owner ? Fully serviced by MAN ? Trailer optional for an additional charge ? Financing possible through our partner banks, we are happy to help you. We expressly reserve the right to sell the item prior to sale, as we also offer this item on other portals. Information on accessories is without guarantee. Subject to changes, prior sale or errors. We offer and strongly recommend a viewing and inspection so that the buyer does not have any false impressions about the condition and suitability. Viewings and inspections are possible at any time by appointment and are expressly desired.

Year of construction: 2019, condition: excellent (used), Four-rope clamshell grab, mechanical clamshell grab, shell grab, ship unloading grab, rope grab, digging grab Itsdpfjw Rnfuox Ag Njn -Condition: New -Manufacturer: LAUDI GVE, four-rope clamshell grab type VZG ship unloading grab -Max. payload of the gripper: 5600 kg -Height of the closed gripper: 3810 mm -height of the open gripper: 4000 mm -Shell width: 2500 mm -Opening width: 4000 mm -Distance between the locking cables: 522 mm -Spacing of the holding cables: 180 mm -Gripper suspension: Q-Gripper -Bulk density: 0.4-0.8 t/m³ -Transport dimensions: 2480/4180/H2500 mm -Own weight: 4400 kg

Condition: as good as new (ex-display), functionality: fully functional, A complete carton packaging and palletising line with comprehensive accessories is being auctioned here! This is a demo machine that was only in operation for a few days! COMPONENTS OF THE PACKAGING LINE Packaging robot KUKA KR 50 R2500 Iontec Gripper Base Labelling robot KUKA KR 10 R110-2 Agilus Gripper 2 Labelling systems Peripheral components Pallet station Room triangle Lantech carton erector Conveyor technology by Interroll Safety equipment Protective enclosure Safety door Safety tunnel Itedpfx Agoxhf Aws Non Light curtain Centralised control system COMPONENTS OF THE PALLETISING LINE Palletising robot KUKA KR 120 R3200 PA Gripper Base Palletising software Flex Package Labelling robot KUKA KR 10 R1100-2 AGILUS Gripper Printwolf table printer Peripheral components Lantech carton sealer Lantech turntable stretch wrapper Conveyor technology Pallet dispenser BILA Pallet conveyor system by Interroll Carton conveyor system by Interroll Carton conveyor system NiO Interroll Safety equipment Protective enclosure Safety doors Programmable safety PLC Airlock at the pallet exit Protection tunnel Centralised control system Further details on the individual components can be found in the attached inventory list. The machine can be provided ready for free loading. Dismantling and loading costs amount to €48,000.

Condition: new, Year of construction: 2022, PROJECT PALLETIZING SYSTEM FOR BUCKETS KUKA palletizing robot with 3-fold gripper for buckets and bucket pick-up belt - 1 KUKA robot - KR 210 with KRC2 Itjdpfxehu Rt Aj Ag Nen

Condition: used, Linear unit, linear axis, gantry axis with servo drive, synchronous servo motor, electric slide, loading unit, linear guide with servo motor and pneumatic gripper SCHNEIDER ELECTRIC / FESTO type PAS43SBG1800 / BMH1002T07F2A Isdpjw Uc T Ijfx Ag Njtn Year of manufacture: 2012 Vertical stroke via Schneider Electric linear axis PAS43SBG1800 Travel distance: 1800 mm Travel per revolution: 20 mm Maximum speed: 1 m/s Drive element: ball screw Guide type: recirculating ball guide size 20 Payload: 60 kg Maximum speed of ball screw: 3000 rpm Motor type: Schneider Electric BMH1002T07F2A Rated voltage: 240 Vrms Rated power: 1.912 kW Rated speed: 3500 rpm Max. current consumption: 29.4 A Horizontal travel: 670 mm via Festo pneumatic cylinder Gripper opening: 600 - 670 mm - Pneumatic gripper on guide carriage - Gripper jaws open pneumatically - Unit is mounted on a welded square tube frame Total weight: approx. 380 kg Overall dimensions (W x H x D): 1280 x 2950 x 1150 mm Very good condition Nearly identical linear unit available under stock number 59700

Condition: ready for operation (used), functionality: fully functional, A complete carton packaging and palletizing line with comprehensive accessories is being auctioned here! PACKAGING LINE COMPONENTS Packaging robot KUKA KR 50 R2500 Iontec Gripper Base Labelling robot KUKA KR 10 R110-2 Agilus Gripper 2 labeling systems Peripheral components Pallet placement area Room triangle Lantech carton erector Conveyor technology by Interroll Safety technology Safety enclosure Safety door Safety tunnel Light curtain Central control system PALLETIZING LINE COMPONENTS Palletizing robot KUKA KR 120 R3200 PA Gripper Base Palletizing software Flex Package Labelling robot KUKA KR 10 R1100-2 AGILUS Gripper Printwolf tabletop printer Peripheral components Lantech carton sealer Lantech turntable wrapper Conveyor technology BILA pallet dispenser Interroll pallet conveyor Interroll carton conveyor NiO Interroll carton conveyor Safety technology Safety enclosure Safety doors Programmable safety PLC Pallet outfeed airlock Safety tunnel Central control system Itsdpfx Aow A Iplsg Nsn Additional information regarding the individual components can be found in the attached inventory list. The machine can be made available for loading free of charge. Dismantling and loading costs amount to €48,000.