Used Guide Fence for sale (4,909)

Condition: new, Year of construction: 2022, VS 3006 guided guillotine shears with DURMA IV sheet holding device Special price* - Demonstration machine Operating hours: 0h Sheet thickness: 6 mm Cutting length: 3,080 mm Cutting angle: 0.5 - 2° Backgauge: 1000 mm via CNC Motor power: 11 kW Length: 4,100 mm Width: 2,050 / 3,650 mm Height: 1,950 mm Iaodpfof U Th Eex Apnot Oil filling: 125 l Weight: 7,500 kg The machine can be viewed and demonstrated at any time by appointment at our demonstration center in Staufenberg. Further machines are available for demonstration at our demonstration center in Staufenberg. We will be happy to send you further information on request. *including transportation and installation

Condition: used, Internal threading machine HAGEN & GOEBEL type HG 10 Tapping machine, Vertical tapping machine Machine. No. 4462 Year of construction approx. 1980 Cutting capacity in steel M3 to M10 Cutting capacity in cast iron M3 to M16 Cutting capacity in brass M3 to M18 mm throat depth 250 mm Pinol stroke 80 mm Table size 340 x 240 mm Spindle speed 200-1000 rpm 6 steps Motor power 0.55 and 0.75 kW Mains connection 380 Volt, 50 Hz - 6 speed levels through 2 motor speeds and 3 belt levels - Thread pitch via guide cartridge - 2 guide cartridges with 1.0 mm and 1.25 mm thread pitch - Spindle holder with cone Ø 14.8 to 16 mm and 4 mm keyway - Table height adjustment with toothed rack via hand crank on the round column - Quick-change tapping chuck size 1, Ø 19 mm Space requirement L x W x H 850 x 550 x 1800 mm Weight 255 kg Good condition Isdpeupbf Dsfx Apnoat

Condition: used, 2-axis linear guide with linear motors - Slide arm pick and place with linear guides for automation Loading unit such as Scara robot, manipulator, handling device, handling system, placement gripper, loading gripper for automation Manufacturer SCHUNK - GEMOTEC - AFAG - LINMOT Type PS01-37x240-M + E1100-MT + T01-/72/420 + EPM 37-780 Year of construction approx. 2005 Horizontal axis with linear motor Gemotec type EPM 37-780 Actuator type: EPM 37x780-M Axis module: LinMot type E1100-MT-HC Horizontal movement: 780 mm Nominal force horizontal: 160 N Horizontal speed: 2.1 m/s Horizontal acceleration: 12.4 m/s² Repeat accuracy: +/- 0.05 mm Horizontal load capacity: max. 7000 g Horizontal guide column: Ø 20 mm Vertical axis with LinMot linear motor type PS01-37x240-M Actuator type: LM01-23x80/160 Axis module: LinMot type E1100-MT Vertical movement 160 mm Nominal vertical force: 44 N Max force vertical: 203 N Vertical speed: 2.2 m/s Vertical acceleration: 50.4 m/s² Repeat accuracy: +/- 0.05 mm Horizontal guide column: Ø 20 mm Power supply unit LinMot type T01-/72/420 (for motor supply) Input voltage: 3 x 400 V AC 50/60 Hz Output voltage: 72 V DC 420 Watt Base frame Support columns: 4 pieces Ø 55 mm Support column height adjustment: 200 mm (manual height adjustment) Mounting foot: 2 x 175 x 90 mm Control voltage: 24 V DC Iodpfx Aju H R Iwspnsat - Can be moved in two axes - Mounting plate for tool holder 66 x 56 mm - Integrated path measurement - Axis modules with integrated positioning control - Festo pneumatic cylinder as holding brake on the vertical axis - Horizontal axis with 3 external fans - Axis modules configurable via LinMot MPC Configurator 3.2 software Space requirement L x W x H: 1120 x 720 x 740 mm Weight: approx. 65 kg Very good condition

Condition: used, Column-guided bandsaw semi-automatic METORA - KALTENBACH Type HMB 380 DS Only for 90° cuts (Made in Austria) Machine No. 4580028 Year of manufacture: approx. 1993 Cutting capacity round: Ø 380 mm Square: 380 x 380 mm Saw blade dimensions: 5650 x 34 x 1.1 mm Saw band speed: 25–108 m/min, continuously variable Material infeed height: 870 mm Hydraulic drive power: 1.5 kW Saw motor power: 4 kW Power supply: 400 Volt, 50 Hz - Fully hydraulic bandsaw in double-column design - Hydraulic saw bow descent with stepless adjustable cutting pressure - Stepless adjustable descent speed - Hydraulic vice clamping with hydraulic bundle clamping from above - Hydraulic unit integrated in machine base - Material feed roller on infeed side with geared motor (not mounted on machine frame) - Coolant system with coolant pump for water emulsion - Minimum-quantity lubrication system for the saw blade - Electric heating cartridge for cooling water and hydraulics - Length stop TRENNJAGER Type EX-Stop1, with handwheel adjustment, digital display, and hydraulic stop carriage clamping Ijdpfxjdzqtgs Apneat Stop length: 6750 mm, stop travel: 5650 mm, stop arm hydraulically foldable without roller conveyor Machine footprint (L x W x H): 2800 x 1400 x 2450 mm Machine weight: approx. 3 tons Weight of stop system: approx. 800 kg In good condition

Condition: used, 2-sided roll container with clamping gates and nylon lashing straps – hot-dip galvanized transport container 744 liters Iaedsy R Sr Hjpfx Apnst This 2-sided roll container with clamping gates is a robust and efficient solution for the safe transport and storage of goods within warehouses, distribution centers, and retail environments. Thanks to its

Condition: refurbished (used), 1 set = 8 guides suitable for the ESTERER S 71 gang saw, completely refurbished, i.e. all sliding surfaces re-milled to precise angles. Iasdpfx Apsywh Hmjnst

Condition: used, 2-sided roll container with clamping gates and nylon lashing straps – hot-dip galvanized transport container 744 liters Iaodoyccxaopfx Apnot This 2-sided roll container with clamping gates is a robust and efficient solution for the safe transport and storage of goods within warehouses, distribution centers, and retail environments. Thanks to its

Condition: used, Refurbished 2-rack roll cage is a practical transportation solution for various applications. Refurbished refers to the fact that the roll container has been refurbished to bring it back to good condition so that it can be used again. Ijdpfx Apjy Hpy Tensat In this case, it is a roll cage with a new roll bottom and used insert gates. Using refurbished

Condition: used, 2-sided roll container with clamping gates and nylon lashing straps – hot-dip galvanized transport container 792 liters This 2-sided roll container with clamping gates is a robust and efficient solution for the safe transport and storage of goods within warehouses, distribution centers, and retail environments. Iedsy Hptaepfx Apnjat Thanks to its

Condition: used, Used 2 rack roll cage, bearing the Kruizinga trademark, is a practical transport solution for various applications. Equipped with 2 removable clamp gates made of galvanized steel, keeping the cargo securely in place during transport. Iajdpfx Apey Hprvjnet Comes standard with 2 nylon straps to keep the goods firmly in place and prevent them from sliding or

Condition: as good as new (ex-display), 7 pieces of guides suitable for the gang saw ESTERER HD 30 or EHD 30, absolutely as good as new because unused, 5 of the 7 guides are hollow body guides for cooling water flow Iasdoigqqhepfx Apnet

Condition: used, Workbench vice, parallel vice LEINEN with dovetail guide and height adjustment. Model: 125. Jaw width: 125 mm. Jaw height: 23 mm. Clamping range: max. 200 mm. Overall height: 550 to 750 mm. - 360° rotatable. - Dovetail guide. - Anvil surface for light straightening work. - Approx. 200 mm height adjustment without lift system. Weight: 44.5 kg. Good condition. Iajdpfx Aoy E T Dyepnst

Condition: used, The edge guiding system is rarely used, equipped with sensor and possibly a warranty. Iaedpeu T Rdijfx Apnet Available quantity: 3 units

Condition: new, Year of construction: 2021, functionality: fully functional, Ladies and Gentlemen, Brand new Erhardt+Leimer web edge control systems are for sale, which have been installed but have not been used to this day. Ultrasonic edge sensor POE FX 46: Compact ultrasonic edge sensor with digital evaluation Measuring range ±3 mm Insensitive to contamination by dust Scanning soundproof materials such as paper, plastic and metal foils regardless of material transparency Internal temperature compensation for stable operating point Bar display to show the current edge position or diagnostic information PoE interface to the data network center _____ FR 6011 broadband sensor infrared: digital, measuring range +/- 79mm, clear width 40mm, with cable 3000mm long with cable gland M16x1.5 and JST female connector 00367440 More details on request. Current delivery time according to E+L: approx. 10-12 weeks after receipt of order or payment in advance Ijdei Hl Hhopfx Apnsat _____ Web guides/web edge control as shown, including monitor Production date is mid/end of 2021 (see type plates). 7x DRB14 rotating frame system EL.NET for controlling a running web, with digital position controller with touch display. Including connection cable. Sensor type: FR 6011 IR broadband sensor Nominal width: 250 mm Roller diameter: 60 mm web tension max.: 300 N Correction path max.: 42 mm If you need more precise data, please ask us or give us a call.

Year of construction: 2022, condition: new, Angle: 0° - 90° Iasdpfx Apji Ezr Nenet Maximum cutting length: 1370 mm

Condition: good (used), Guide cylinders, guide pneumatic cylinders, pneumatic cylinders, compact cylinders Isdpfex Ifhpox Apnoat -Manufacturer: Festo, guide cylinder type DFM-20-30-B-PPV-A-GF 532316 -Piston: Ø 20 mm -Stroke: 30 mm -Sliding guide -Number: 2 cylinders available -Dimensions: 116/83/H36 mm -Weight: 1.1 kg/pc.

Condition: good (used), Marking, straightening, and welding plate, cast iron + steel 1 x 4000x7000x300 mm 1x 1500x3000x205 mm Iaodpfx Aoxmkfbjpnet 1 x 1500x3000x255 mm 1x 2000x4000x100 mm 1x 2000x4000x150 mm 1x 2000x1500x300 mm

Year of construction: 2000, condition: used, Milling stop adjustment: via handwheel Milling stop measurement display: Siko counter Milling jaws adjustment: handwheel Milling jaws measurement display: Siko counter Iaodpfx Aoy A Hi Ropnjt

Condition: excellent (used), JBS guide bush pressure system Iajdpfepl U Efex Apnst suitable for Star Ecas 32 - on request the suitable maintenance unit can be delivered with it

Condition: good (used), Year of construction: 2020, functionality: fully functional, 5.5 kW, -45/+45° tiltable, Isdpjykar Hofx Apnoat electric height and swivel adjustment Left/right, 6 speeds Aigner fence 2 x 500 mm, digital readout on the spindle fence, table 2500 mm x 780 mm, mechanically programmable spindle fence with two displays, system for quick removal from the worktable New price: €18,700 Available around September 2026 Shipping available at extra cost!

Condition: good (used), Year of construction: 2001, machine/vehicle number: 1101420, Offer 26077 Technical data (approx.): - Control system for fully automatic operation (feed, cutting speed, automatic feed, etc.) - Separate freestanding control panel - Cutting capacity at 90° round: 260 mm flat: 300 x 260 mm - Smallest material dimension round/flat: 15 / 10 x 15 mm - Smallest possible cut length: 10 mm - Remnant length automatic/manual: approx. 130 / 40 mm - Saw band dimensions: 4400 x 34 x 1.1 mm - Cutting speed steplessly adjustable: 20 – 140 m/min Ijdpfoy Ddpdsx Apnjat - Cutting pressure steplessly adjustable: 0 – 10 m/min - Hydraulic material clamping with clamping pressure regulation - Coolant system - Total drive power: 400 V / 8.0 kW - Space required (approx.): W 2700 x H 1600 x D 2450 mm - Weight (approx.): 1800 kg - Roller conveyor: 2000 mm

Condition: ready for operation (used), Length with support: 2280 mm Length of each extension piece: 710 mm Ijdjd Atqkjpfx Apneat 5 Carriages with overall height (lower edge of track to upper edge of carriage): 36 mm Runner rail mounting, hole: 6.5 mm at a distance of: 60 mm Carriage with 4 mounting holes: 6.5 mm

Condition: good (used), Year of construction: 2003, Head machining of posts, boards, laths for tear-free machining. Isdpogmt Erjfx Apneat with magazine which works itself off automatically 2 milling spindles move independently from the outside to the middle so that there are no tears.

Condition: new, Year of construction: 2026, functionality: fully functional, overall weight: 8 kg, warranty duration: 24 months, type of input current: DC, feed length X-axis: 3,400 mm, space requirement length: 3,700 mm, welding current (max.): 3 A, power: 0.072 kW (0.10 HP), Equipment: CE marking, documentation/manual, Pedante is an automatic digital length stop for miter and compound miter saws. It is designed for workshops where many parts are cut to the same length or where cutting lengths change frequently. The length is entered on the touchscreen, after which the stop automatically moves to the set position. This significantly reduces manual measuring and adjustment. Iaedpjy R Si Eefx Apnst The system is suitable for joinery shops, furniture production, window and door manufacturers, as well as aluminum and PVC profile processing. The stop can be mounted on either the left or right side of the saw, supports millimeters and decimal inches, and automatically monitors its position during operation. Depending on the required working length, several models are available from 1,040 mm to 5,760 mm; prices range from €1,290 to €2,490 excl. VAT.

Condition: good (used), Guide rail, servo motor, electric motor, DC motor, DC geared motor -Servo drive: with linear guide -Servomotor: EPH elektronik type DO31991373B00/4133 Iedpfx Aoykzalspnsat -Voltage: 24 V -Travel distance: 47 mm -Hole spacing: 285 mm -Dimensions: 640/110/H140 mm -Total: 4.9 kg