5
adjustable gear motor, variable speed gear motor, electric motor
F7pzz2l8y
-Manufacturer variable speed gear Lenze type: 155-Z2/ZNA0-80-6
-Manufacturer gearbox Lenze type: Z2
-Manufacturer motor HEW type: RF80L/6
-Motor power: 0.55 KW
-Speed range: 0.72-4.3 rpm
-Motor: adjustable
-height of the shaft axis: 160 mm
-Drive shaft: Ø 40 mm
-Number: 1 piece of motors available
-Price: per piece
-Dimensions: 650/400/H270 mm
-Weight: 96 kg
3
Load capacity: 60.000 kg; Gripper: 2005 - 4500 mm
F90feg2
2
HM adjustable groove cutter LEITZ 20627 4-7,5mm
very good condition, as good as new
diameter 150mm
the cutter is infinitely variable from 4mm - 7,5mm
for 30mm spindle or holder
can mill approx. 25mm deep
for speeds up to 9000 rpm
for manual feed, with BG-test
with the milling cutter you can mill grooves from 4mm to 7,5mm up to 25mm deep
the cutting edges are OK and sharpened, without gaps or breakouts
with large resharpening zone, the cutter can be resharpened several times
was used only little ...
2
No. 449
Pquw7
second hand
Make Stehle
Dimensions 150 mm x 4-14 mm x 30 mm
HM
BG test
Circle diameter approx. 150 mm
Hole about 30 mm
Groove width adjustable approx. 4-14 mm
Storage location 97447 Gerolzhofen, free on truck, unpacked
Handover in the current condition as viewed,
without guarantee and warranty
3
adjustable microscope for ESKOMATIC D6
Bzo9ypfc3k
3
Double sided mitre fence
Bbyst9070
for fast and stepless production of mitre cuts on narrow and short
narrow and short workpieces at any angle from 0° to 90°.
for cutting to length up to 1375 mm
easy handling and quick mounting on the rolling carriage of the saw
suitable for Panhans models 680_10_20
conversion kit for other models on request
availability: short term
Storage location: Hochheim
5
adjustable gear motor, variable speed gear motor, electric motor
-Manufacturer variable speed gear unit SEW type: R40FV01
-Manufacturer motor SEW type: DFT80K-4
-Motor power: 0.55 kW
-Speed range: 20-85 rpm
Vricwm
-Motor: adjustable
-height of the shaft axis: 90 mm
-Drive shaft: Ø 25 mm
-Construction: B3/B5
-Number: 3 motors available
-Price: per piece
-Dimensions: 480/200/H420 mm
-Weight: 37 kg
9
Cutting saw for halving round timber into fence slats etc.
up to 140 mm diameter. With automatic crosscut saw.
V - guide of the logs with feed and pull-out unit.
S80f3x
Saw motor 7,5 KW. Crosscut saw 3 KW.
With extraction belt and ejector.
6
4 pieces adjustable clamping jaws for faceplate
lathe chuck, mechanical clamping device, clamping block
Chuck jaws
Pprnh
jaw width 100 mm
Jaw length 300 mm
jaw height 142 mm
- Step jaws for turning as turning and drilling jaws
- Jaw adjustment via trapezoidal thread spindle
- Jaw carrier with 6 bores Ø 33 mm and 36 mm guide groove
- Jaw carrier bore spacing 140 / 140 x 220 mm
Dimension L x W x H 450 x 300 x 280 mm
Weight per jaw 100 kg
weight all 4 jaws 400 kg
good condition
1
No. 450
second hand
Pqk27
Make Stehle
HM
permanently equipped
BG test
Flight circle diameter approx. 150 mm
Hole approx. 30 mm
Groove width adjustable approx. 4 - 7.5 mm
Storage location 97447 Gerolzhofen, free on truck, unpacked
Handover in the current condition as viewed,
without guarantee and warranty
11
OFFER 21334
Aluminium mitre circular saw with stop system
Technical data:
- Saw blade diameter 400 mm
- motor speed 2800 rpm
- Cutting range at 90° approx. 60 x 60 mm
- Mitre Li + Re. 45 - 90 - 45 °
- Compressed air supply 6 - 8 bar
- Air consumption per working cycle 10 L / min
Bzon88odut
- Drive 400 V / 1,5 kW
- space requirement approx. W 13000 x H 1500 x D 1500 mm
- weight approx. 1000 kg
- with: - pneumatic saw blade feed
- pneumatic clamping vices
- pneumatic coolant check de...
15
5
adjustable gear motor, variable speed gear motor, electric motor
Vfzdi3s
-Manufacturer variable speed gear unit SEW type: R40VU1
-Manufacturer motor SEW type: DFT71D4
-Motor power: 0.55 kW
-Speed range: 21-86 rpm
-Motor: adjustable
-height of the shaft axis: 92 mm
-Drive shaft: Ø 25 mm
-Number: 2 motors available
-Price: per piece
-Dimensions: 470/220/H370 mm
-Weight: 36 kg
double spiral
Nszu7
wire diameter 1,6-3,8 mm
mesh width 50x50 mm
working width 3000 mm
capacity 170 m²
tooling for mesh width 50x50 + 40x40
6
Transnorm adjustable inclined roller conveyor 3500-950-900
RA1864
Make: Transnorm
Roller width (RB): 900 mm
Nominal/outer width (NB): 950 mm
Length: 3500mm
Diameter rollers: 50 mm
Distance between rollers: 54 mm
Roller conveyor motor: SEW drive motor with frequency converter
frame height: 145
Bx8kecwsjy
410 mm side guides included
The roller angle is easily and quickly adjustable between 6° and 10° with an adjusting screw
Conveyor speed: freely adjustable with frequency converter
Optiona...
2
No. 480
screwed to the socket including intermediate rings
Pv3jxu
second hand
Dimensions 150 mm x 7.0-13.0 mm x 40 mm
mechanical feed
Circle diameter 150 mm
Hole approx. 40 mm
Blade width approx. 6.5 mm x 2 mm
Groove width adjustable approx. 7 - 13 mm
Storage location 97447 Gerolzhofen, free on truck, unpacked
Handover in the current condition as viewed,
without guarantee and warranty
3
- Load capacity rotating stand: 1.000 kg
- Machine body: Sheet metal construction made of quality steel,
- length/width 1.000mm x 1.180mm
- height 2.220mm
- Stroke face plate (vertical): 700-1.400mm
- diameter of face plate: 600 mm
- Chuck: M-WPS500
- Machine weight (DSH): 1,400 kg
- Face plate speed: 0.1- 2 rpm
Operation
on the control cabinet: Selector switch: Turn foot switch or
Button on the control cabinet
Htkphkj9c
Turn: LEFT/RIGHT
Lift: UP/DOWN)
Potentiometer for infin...
15
5
adjustable gear motor, variable speed gear motor, electric motor
-Gearbox manufacturer: MOTOVARIO TKFL/10
-Manufacturer engine: Ansaldo A1C0712CA249
-Motor power: 0.37 kW
-Speed range without angular gear: 190-1000 rpm
-Speed range with angular gear: 19-100 rpm
-Motor: adjustable
-Hollow shaft: Ø 24 mm
-Construction: B14 angle
-Number: 1 piece of motors available
-Price: per piece
G0rakqn
-Dimensions: 480/220/H210 mm
-Weight: 20 kg
1
double spiral
wire diameter 1,5-3,8 mm
mesh width 20-80 mm
Pufuhi
working width 3000 mm
capacity - m²/hour 150 m²
tolling for mesh 50 mm
4
Transnorm inclined roller conveyor 3130-840-1180
RA1865
Make: Transnorm
Roller width (RB): 840 mm
Nominal/outer width (NB): 1180 mm
Length: 3130mm
Diameter rollers: 50 mm
Distance between rollers: 55 mm
Roller conveyor motor: SEW drive motor
Bx9qeat3ji
frame height: 210
410 mm side guide with 200mm belt conveyor included
Conveyor speed: freely adjustable with frequency converter
Optionally available:
Supports: 70,00 Euro p. piece plus VAT.
frequency converter for the two SEW motors:500 E...
1
including telescopic stop
Bwgcerdcsa
including 2 folding stops
No. 3380132
15
Welding rotary table Air Liquide 2,5 tons
hydraulically height adjustable
Cjtx899us
with hand and foot remote control
speed infinitely variable with digital display
like new
Weight 1750 Kg
11
Capper / lid press for pressing lids (snap caps) on sealed cans. Stacks put manually on feeder of machine. When the rim of the container engages the lid, it enters a power overhead belt compression section within the lid press machine. The lid is gently pressed and sealed into place, as long as it is perfectly aligned with the grooves.
Byp8hljpws
5
adjustable gear motor, variable speed gear motor, electric motor
-Motor power: 0.37 kW
-Speed range: 12.7-64 rpm
-Motor: adjustable
-Drive shaft: Ø 30 mm
Me9yf
-Construction: hollow shaft
-Number: 1 piece of motors available
-Price: per piece
-Dimensions: 490/440/H200 mm
-Weight: 31.5 kg
3
Hydr. height-adjustable roller Fabr. TRANSLYFT type TLH 2500
Masch. # 000290 built 1990
Technical data:
Roll width 400 mm
Roll length 6000 mm
Edition size 800 x 6000 mm
Capacity 2,5 t
U08sewnj
Dimensions L x W x H 6000 x 800 x 1000 mm
with
-4 built-in scissor lift
5
Pressure capacity 50 t
table size L x W 650 x 515 mm
drop-through hole Ø 230 mm
throat 250 mm
stroke adjustable 8 - 120 mm
Stroke rate 100 / min
ram adjustability 70 mm
Drive power 2,2 kW
dimensions L x W x H 1100 x 1400 x 2220 mm
Weight approx. 3000 kg
Accessories / special features:
- Adjustable table
- Foot release
This eccentric press is only approved for safe tools or fixed shielding.
Siegfried Volz Machine Tools
Rüschebrinkstr. 151 - 153
D - 44143 Dortmund - Wambel
Drgvbgn2
2
Make Guhdo
used, great condition
HM
permanently equipped
Dimensions 250 mm x 10.2 - 20 mm x 30 mm
Number of cutting edges 4/8 pieces
Brgiupohd8
Pre-cutter 4/8 pieces
Storage location 97447 Gerolzhofen, free on truck, unpacked
Handover in the current condition as viewed,
without overhaul,
without guarantee and warranty
10
600 Kg load capacity 1000 Kg load capacity
Ppjaf
Welding rotary table adjustable in height
with through hole 100 - 200mm
plate diameter 700mm 900mm
Height horizontal min. 0,65m, max. 1,25m
height tilted min. 0,45m, max. 0,95m
speed from 0,01 - 1,1 rpm
Tilt up to 135
hand and foot remote control with speed indicator
very robust
3
Positioner ABB IRBP 2000L
Handling capacity 2000kg
Two head units ( motor/gearbox/plate/stand) available
One ( 1pcs) adjustable tailstock available.
By8vfzl8c0
Adjustable L= 2800mm
4
adjustable gear motor, variable speed gear motor, electric motor
-Manufacturer variable speed gearbox Nord type: SK20-R100U-80S
-Motor power: 0.18 kW
-Speed range: 24-120 rpm
-Motor: adjustable
-height of the shaft axis: 125 mm
-Drive shaft: Ø 25 mm
-Construction: B3
-Number: 1 piece of motors available
Crocrir
-Price: per piece
-Dimensions: 500/320/H240 mm
-Weight: 30 kg
1
Adjustable 2 - locker Balasubramanian cutterhead Fabr. VICTORY hole and SCHNIEDER type V1302
22594 Fabr.# year 1994
Technical data:
Bzt3fab
Drilling capacity ST 50 13 mm
KL. 34 mm
Speed 1:1
Erl Spindle Center distance 130 mm
with
-Clamping tongs recording
-Mounting flange
used, in very good condition
Height-adjustable work bench with parallel blocks, make "Factory floor" with various interchangeable JAWS
Bcwdngpjqz
Rotatable, table size: 650 x 650 mm
Height: 750-1200 mm
Vise
Jaw width: 130 mm
Wingspan: 150 mm
3
2 T - grooves in the table 30° - 140°
2 side stops with scale and groove for attachable back stop
Cutting depth adjustable
Knife for stainless steel built in
Foot switch
Selector switch for single step or step by step operation
Bu2a0froqp
2 mechanical hold-downs
Cutting gap adjustment automatic
Knife length (mm) 220
Cutting capacity R = 42Kg/mm2 6,5
Cutting capacity: R = 60Kg/mm2 5
Strokes/minute: at max. length 50
Strokes/minute: at 50 mm cut 80
Working height (mm) 900
Oil tank capacity 35
Engi...
15
Welding rotary table height adjustable 6 tons load capacity
Dmly7ht
Complete set with hand and foot remote control
Welding current transmission 600 Ampere
Speed 0.01 to approx. 1.1 rpm
Height tilted min. 1000 mm
Height tilted max. 1950 mm
Height horizontal min. 1025 mm
Height horizontal max. 2015 mm
Length 3000 mm
Width 1950 mm
1A condition
several turntables of the same type are available:
- 2 x TC 2
- 1 x TC 3
- 2 x TC 4
6
Adjustable log house cutter from Krüsi 230mm /41-80mm/30 -2 pcs .
Aluminium .
Cxszcw8qs
5
adjustable gear motor, variable speed gear motor, electric motor
-Manufacturer variable speed gear units SEW type: S40
-Manufacturer motor SEW type: DFT71C2BAZ
-Motor power: 0.37 kW
-Speed range: 41-205 rpm
-Motor: adjustable
Bhw92e7
-Drive shaft: Ø 25 mm
-Construction: B3 angle
-Number: 1 piece of motors available
-Price: per piece
-Dimensions: 560/180/H275 mm
-Weight: 30 kg
6
Hydraulic notching machine make BOSCHERT type K 30-180/ CNC
year of construction 1989
for notching all angles from 30° to 180
technical data:
cutting capacity steel ST 40 4 mm
Cutting capacity stainless steel 3 mm
W3cgybuvk
Blade length 200 mm
Cutting length 200 x 200 mm
Cutting angle adjustable 30 - 180
table height 900 mm
electrical connected load 8 KVA
hydraulic oil filling 30 litres
outer dimensions L x W x H 1500 x 1000 x 1930 mm
weight 1950 kg
without stop
with
- control PC 2000 for settin...
3
Wire diameter range: 1,6 - 2,8 mm
Mesh width: 20 - 70 mm
Working width: max. 2.000 mm
Output: max. 170 m²/Stunde
Bk9jfc3gch
9
Assembly table with adjustable support bars COMALL JOB 15/2000, new
Technical specifications:
- Contact surfaces in semi-rigid gray PVC
- Loading: 180 Kg
Crubibt3
- Four length wise sliding supporting bars, clamping system through handle
- Pneumatic system with two pneumatic connections
- Hardware boxes, 6 pcs.
- Extensible support, equipped with two longitudinal sliding bars
15
Welding turntable hydraulic height adjustable, 10 tons load capacity
Condition as new, little used
rotation speed 0 - 0,6 U/min
Gwu7dg
tilt angle 0 - 135 °
height adjustment min. 1100mm - max. 2300mm
table diameter 2000mm
motor drive 3 KW
Welding ground connection 1000 Ampere
Self-locking gear, no running forward or backward with eccentric load
Speed control with frequency converter
Heavy compact construction, high stability
CE certified
External hydraulic unit and control cabinet,
can be instal...
10
Length: 1400mm
Width: 80mm
Adjustable distance between the strips: 0 - 140 mm
Manual height adjustment. max: 1500mm
0.55kW, 2.68A
Stainless steel design.
U0ejh9wf
Purchase and purchase of industrial equipment and machines.
Large selection of used machines, industrial equipment.
5
adjustable gear motor, variable speed gear motor, electric motor
-Manufacturer gearbox Ercole Marcelli type: MA80b4B14
Mdwgf
-Manufacturer Motor Motovario Type: TKR/10
-Motor power: 0.75 kW
-Speed range: 40-200 rpm
-Motor: adjustable
-Height of shaft axis: 163 mm
-Drive shaft: Ø 28 mm
-Number: 1 piece of motors available
-Price: per piece
-Dimensions: 530/240/H260 mm
-Weight: 35 kg
15
S&S Machines GmbH
Sale - Renting - Spare parts service
We offer:
Mini excavator Bobcat E20
weight approx. 2019 kg
year of construction 2015
Operating hours approx.2764
3fm29mq
Hydraulic quick coupler
clearing bucket
Backhoe bucket
Fast gear
Auxiliary hydraulics DW on joystick
Adjustable undercarriage
UVV against surcharge New
Immediately ready for use machine
Additional accessories such as hydraulic hammer, sorting grab, Powertilt etc. available at extra cost
Trade-in of your old machine possib...
2
Double mitre fence Lachner
Bwj922erh3
DGA 900
For Altendorf 80s