Used Hacker Zerhacker Wood Shredder for sale (6,863)

Condition: excellent (used), operating hours: 820 h, Residual Wood Shredder Cpedpoylaf Asfx Aa Nsw Manufacturer: WEIMA Type: WL 4 Feed opening: 600 mm x 800 mm Hopper capacity: 0.6 m³ Throughput rate: depends on material and screen Rotor diameter: 252 mm Rotor speed: 60 - 100 rpm Motor power: 18.5 kW Tools: 14 knives Screen perforation: 20/25 mm Extraction nozzle diameter: 160 mm Air velocity: 28 m/sec Weight: approx. 1,200 kg Dimensions (L x W x H): 1600 x 1150 x 1655 mm Including all documentation Note on used machines: • Technical data and prior sale subject to change without notice. • Stated prices are ex location, loaded onto truck, ready for pickup. • Machines have been cleaned and function tested. • All machines are purchased as inspected, without any guarantee or warranty claims. Buyers are welcome to inspect the machines at our premises. • Special agreements are valid only in written form. (We only respond to inquiries that include your address and telephone number!)

Condition: excellent (used), CATALOGUE NUMBER 6114 TECHNICAL DATA Codpfox Rqtpsx Aa Nopw - Feed hopper inlet: 800x1000 mm - Rotor working width: 800 mm - Pump motor: 0.75 kW - Main motor: 15 kW - Number of knives: 21 pcs - Knife size: 30x30 mm - Screen: 0.8x10 mm - Pressure drawer - Electric auto-reverse - Discharge augers: 2×1.1 kW - Dimensions (L/W/H): 2460x1800x2250 mm - Weight: 1660 kg – German-made – Auto-reverse – Pressure drawer – Not painted – In very good condition – Used shredder Net price: 63,900 PLN Net price: 15,200 EUR depending on the exchange rate, 4.2 EUR (Prices may vary with significant exchange rate fluctuations)

Condition: excellent (used), CATALOG NUMBER 6955 TECHNICAL DATA - Feed hopper inlet (L x W): 1070x710 mm - Outlet for chipped wood: Ø 200 mm - Rotor working width: 700 mm - Main motor: 18.5 kW - Pump motor: 1.5 kW - Number of knives: 21 pcs - Knife size: 35x35 mm - Screen: 50 mm - Pressure drawer - Electric auto-reverse - Dimensions (L/W/H): 1700x1300x1640 mm - Weight: 1780 kg Cedox Rq I Tjpfx Aa Njpw ADVANTAGES – German-made – Auto-reverse – Pressure drawer – Very good condition – Used chipper Net price: 67,900 PLN Net price: 16,160 EUR Net price calculated at exchange rate 4.2 PLN/EUR (In the event of major exchange rate fluctuations, the price may change)

Condition: excellent (used), CATALOG NUMBER 6875 TECHNICAL DATA - Feed opening width: 720 mm - Feed opening height: 160 mm - Thickness of material to be shredded: 160 mm - Shaft width: 720 mm - Shaft diameter: 600 mm - Knife length: 80 mm - Number of knives: 4×12 pcs - Screen size: 25 mm - Entry pressure feed roller: 0.75 kW - Bottom gear-driven feed roller: 1.8 kW - Top gear-driven feed roller: 1.8 kW - Vibrating chute length: 4470 mm - Vibrating chute width: 710 mm - Vibrating chute motor: 2.2 kW - Main motor: 55 kW - Autoreverse - Extraction nozzle diameter: 260 mm - Vibrating chute dimensions (L/W/H): 4470/950/930 mm - Machine dimensions (L/W/H): 3100/1500/1170 mm - Total weight: approx. 5500 kg – German-made Cpsdpjx Rc R Hsfx Aa Njw – Very low hours of use – Original documentation - Autoreverse (adjustable) – Used shredder, in very good / excellent condition Net price: 159,900 PLN Net price: 38,070 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: new, Year of construction: 2026, Engine power 18,5 kW rotor diameter 248mm Number of cutting edges 17 pieces indexable inserts Feed opening 624 x 792mm Suction nozzle 160mm left or right suction possible weight approx. 1300 kg Perforated screen 15/20mm Outer dimensions approx. 1740 x 1220 x 1670mm LxWxH Cedjnzh T Topfx Aa Nspw

Condition: excellent (used), Catalogue number 7836 TECHNICAL DATA - Loading hopper inlet 800x600mm - Outlet for shredded wood diameter 160mm - Rotor working width 580mm - Main motor 22kW - Pump motor 0.75kW - Number of knives 15 pcs - Knife dimensions (crown type) 40x40mm - Screen 25mm - Hydraulic pusher drawer - Electric autoreverse - Dimensions (L/W/H) 1730x1200x1620mm - Weight 1100kg ADVANTAGES – German-made – Operating documentation (DTR) – Hydraulic pusher drawer – Autoreverse – Used chipper, in very good condition Cpedsyg Iqpepfx Aa Njw Net price: 39,900 PLN Net price: 9,500 EUR (based on rate 4.2 EUR) (Prices may change with significant fluctuations)

Condition: excellent (used), Gross Gaz 102 shredder/chipper 22 kW motor, rotor length 1020 mm, 50 knives on the rotor, hydraulic drawer, 15 mm screen, autoreverse, Cedpsylav Ujfx Aa Njpw loading hopper inlet 1020 x 1500 mm The machine is in very good condition and fully performs its functions.

Condition: good (used), Year of construction: 2008, functionality: fully functional, Chipper Shredder Teknamotor Skorpion 500 EB/2 - manufactured in Poland - year of production 2008 - DTR, CE - output up to 14 mq/4 TECHNICAL PARAMETERS: inlet width 500 mm inlet height 130 mm shaft diameter 400 mm shaft width 515 mm main motor 45 kW number of knives 2 pcs. length of knife 515 mm bottom gear drive shaft bottom shaft motor 1,5 kW Cpsdstp Tayjpfx Aa Njw top gear pulling shaft top shaft motor 1,5 kW length of infeed belt receiving belt length 3000 mm 3800 mm belt width 500 mm belt feed forward / backward transport dimensions (length / width / height) 500 / 240 / 220 cm weight about 2500 kg

Condition: used, Technical specifications: For shredding wood waste Shaft width: 800 mm Shaft diameter: 300 mm Number of knives: 18 Knife dimensions: 30/30 mm Hopper: 1000x800x900 mm Screen diameter: 15 mm Csdjyrfigspfx Aa Nopw Discharge diameter: 200 mm Emergency stop switch Power supply: 400 V Motor power: 22 kW Overall dimensions: Length: 2000 mm Width: 1600 mm Height: 1800 mm

Condition: excellent (used), Rębak Weima WL6, silnik 18,5KW, długość rotora 800mm, Codpsw Aaumofx Aa Nepw szuflada hydrauliczna, autorewers.

Condition: new, Year of construction: 2026, Weima single shaft shredder type WL 6 Power 18,5 kW Our machine concept WL 6 The Weima high performance shredders with their flexible can process all kinds of wood materials (hardwood, softwood, chipboard, MDF materials Cedpoh Eiw Iefx Aa Nepw softwood, chipboard, MDF materials, plywood, veneer residues etc. ) into and, in the case of bulky materials, achieve an enormous volume reduction of the material. enormous volume reduction of the material. Mode of operation: The machine is equipped with a large hopper and can be fed by a conveyor belt or by hand. fed by means of a conveyor belt or by hand. This hopper can be adapted to individual needs and guarantees a continuous and cost effective and cost effective material feed without the need for manual assistance. manual assistance. Vqwemi Technical specification WL 6 / 18,5 kW Hopper opening: 800 x 1.000 mm hopper capacity: 0,9 m³ working width of the rotor: 800 mm diameter of the rotor: 252 mm Driving power: 18,5 kW Rotor speed: 80 -120 rpm Number of knives: 42 pieces type and size of knives: concave / 40 x 40 mm, cutting reversible crowns Sieve perforation: 10-60 mm possible (standard 15-20 mm) Painting: WEIMA standard RAL 2002 / 7016 connected load: 400 V +/- 5% / 50 Hz weight: approx. 1.600 kg Included: - Switch cabinet ( Rittal ) incl. electrical control ( Moeller / Siemens ) and star-delta start-up - Rubber oscillating elements - V - rotor ( patented ) with knife pockets fixed in the profile - gear limit switch - On

Condition: new, Year of construction: 2026, Weima single shaft shredder type WL 6 Power 18,5 kW Our machine concept WL 6 The Weima high performance shredders with their flexible can process all kinds of wood materials (hardwood, softwood, chipboard, MDF materials softwood, chipboard, MDF materials, plywood, veneer residues etc. ) into and, in the case of bulky materials, achieve an enormous volume reduction of the material. enormous volume reduction of the material. Mode of operation: The machine is equipped with a large hopper and can be fed by a conveyor belt or by hand. fed by means of a conveyor belt or by hand. This hopper can be adapted to individual needs and guarantees a continuous and cost effective and cost effective material feed without the need for manual assistance. Codjh Hnp Dopfx Aa Nepw manual assistance. Technical specification WL 6 / 18.5 kW hopper opening: 800 x 1.000 mm hopper capacity: 0,9 m³ working width of the rotor: 800 mm diameter of the rotor: 252 mm Driving power: 18,5 kW Rotor speed: 80 -120 rpm Number of knives: 42 pieces type and size of knives: concave / 40 x 40 mm, cutting reversible crowns Sieve perforation: 10-60 mm possible (standard 15-20 mm) Painting: WEIMA standard RAL 2002 / 7016 connected load: 400 V +/- 5% / 50 Hz weight: approx. 1.600 kg Included: - Switch cabinet ( Rittal ) incl. electrical control ( Moeller / Siemens ) and star-delta start-up - Rubber oscillating elements - V - rotor ( patented ) with knife pockets fixed in the profile - gear limit switch - Contact pressure

Condition: new, Year of construction: 2026, Weima chipper / shredder WL 8 The WL 8 single-shaft shredder is a proven classic for shredding all types of wood waste. It is used, for example, thousands of times in wood-processing plants all over the world. The high quantity of these highly demanded shredders guarantees a proven and reliable technology at the best price-performance ratio. The machines are characterized by their very robust design, which ensures an extremely long service life (even outdoors). Intuitive operation thanks to Siemens PLC control with touch display. To ensure that the electronics are optimally matched to the machine, we design, build and wire our control cabinets ourselves. We only use high-quality components - for example from Siemens or Rittal. Intuitive touch interfaces guarantee quick adjustments. Functions such as setting the slider clock or stop ensure high throughput. The built-in overload protection also prevents defects in the machine. No material bridges due to free-cutting hopper design The hopper fulfills several tasks at once. First, the material to be shredded is fed through it - manually, mechanically, or by conveyor belt. The generous opening makes it easy to fill even very large parts. However, its special design, which is rounded at the front and thus effectively prevents material bridges, is decisive for shredding. Even with bulky parts, the shredder cuts itself free. If required, both hopper extensions and lids with gas pressure springs are available. Durable rotor bearings thanks to offset design A rotor bearing must be particularly robustly built due to the extreme stresses it is subjected to during shredding operation. To prevent dust or foreign matter from getting inside it, we have set it apart from the machine frame. This also makes it very maintenance-friendly and easy to access. Rotor diameter (mm): 260 Rotor length (mm): 1000 Rotor speed (rpm): 80 - 125 Power (kW) 22 Number of knives: 54 Available knife sizes (mm): 40 x 40 Grain size (mm): Suction port (mm): 200 Feed opening (mm): 1000 x 1250 length (mm): 2045 width (mm): 1740 height (mm): 1840 Weight (approx. kg): 2200 Accessories: - 2nd row of knives - logspacer Csdpfxopdqzxo Aa Nspw Location: Ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2024, Single-shaft shredder HOKUTech special offer model H600 Compact, robust, high throughput The H600 high-performance shredder with its flexible application options can process all types of wood-based materials (hardwood, softwood, chipboard, MDF materials, plywood, veneer residues, etc.) into chips and achieves an enormous reduction in the volume of bulky materials. The hydraulically controlled pusher feeds the wood waste to be shredded into the cutting area of the rotor and is controlled automatically and load-dependent. The high-performance solid steel electric rotor has a diameter of 252 mm and operates at a rotor speed of 85-95 rpm. The concave-ground, aggressive and 4-way rotating knives / reversible cutting crowns are located in milled knife pockets on special knife carriers. This highly efficient system guarantees high throughput, low energy consumption and optimum discharge of the shredded material by reducing the cutting gap between the counter blade and the rotor. Chip size (10 - 60 mm) Technical data: - Hopper opening - Hopper capacity - Working width of the rotor - Diameter of the rotor - Drive power - Rotor speed 600 x 800 mm 0.6 m3 600 mm 252 mm 15 kW Codpfxoutmw He Aa Nopw 90 rpm Location: Comes to stock 54634 Bitburg - available by arrangement -

Condition: new, Year of construction: 2026, Aluminum Angled Conveyor Belt with Substructure including adjustable feet and machine feet for leveling uneven surfaces Horizontal section: 2,500 mm Inclined section: 6,000 mm Incline angle at the bend: 45° Height of the horizontal section: 350 mm Total conveyor length measured on the floor: 6,750 mm Discharge height at the end of the conveyor: 4,500 mm Cpedpfx Aajyhzhzo Njw Design: Aluminum construction - Double profile reinforced 90x45 mm - Full-surface discharge sheet 2.0 mm galvanized Drive drum and return drum S235 steel, welded and machined Ø100x620 mm crowned and turned, shaft fixed with pillow block bearings. Drive: Shaft-mounted gear motor 1.10 kW, belt speed: 0.53 m/sec Electrical connection 230/400 V, 50 Hz, IP54 protection class Drive supplied ready for connection up to the motor terminal box (Commissioning must be carried out by a qualified electrician) PU conveyor belt DM 10/2 0+005 PU including wave edge PU petrol matte Belt width: 600 mm 2 pcs wave edges 50 mm high, 25 mm wide, high-frequency welded 42 pcs T-40 cleats, 400 mm long, approx. 401 mm spacing Belt material: 2-ply, highly cross-stable In the bend area, the belt is guided on both sides by 3 hold-down rollers each. The belt features a 70 mm edge-free zone on both sides. Due to the wave edges, the usable belt width is reduced: Usable width: 300 mm, as follows: (top view) cross section 70+25+5+400+5+25+70 mm Special features: Belt guidance via PVC wedge strip on the running surface profile - 10x6 mm - Including widened substructure for improved stability against top-heaviness - Including cut-out in the discharge sheet - Including sliding guides in drive and return drums - Including magnet-free zone in the area of the overbelt magnet separator - Including bracket for DMPM1200 in the inclined section Discover customized solutions for your industry! As an innovative mechanical engineering company, we are proud to offer tailor-made solutions for the recycling, food, and further processing industries. Our comprehensive product portfolio includes everything from conveyor belt systems, flat conveyors, inclined conveyors, and angled conveyors to Z-conveyors. In addition, we manufacture feed hoppers, magnetic separators, overband magnet separators, drum magnets, and dosing bunkers – all custom-built to our customers' specific requirements. We understand that each industry and project is unique. That is why we individually adapt our solutions to your specifications and requirements. Complex projects are an exciting challenge for us, and we look forward to developing innovative solutions together with you. For us, there are no special designs – we find the right solution for every challenge! Put us to the test! Contact us and discover how we can transform your requirements into bespoke solutions. Let’s shape the future of your production processes together! Conveyor belt, conveyor system, discharge belts, belt conveyors, magnetic separator, overband magnet separator, recycling, wood chips, plastics, metal-free, metal detection, neodymium, overband magnet, magnetic belt separator, lifting magnets, filter rods, magnetic grids, magnetic grates, metal separator, block magnet, filter systems, dosing hoppers, feed hoppers, filling systems

Condition: new, Year of construction: 2026, Aluminum angled conveyor with substructure Including adjustable feet as well as machine feet for leveling uneven surfaces Horizontal section: 3,500 mm Inclined section: 2,100 mm Inclination angle at bend: 45° Total conveyor length measured on the floor: 5,000 mm Discharge height: 2,000 mm Height of horizontal section: 500 mm Design: Aluminum structural construction - Triple-reinforced profile 135x45 mm - Full-surface discharge sheet 2.0 mm, galvanized Drive drum + tail drum made from S235 steel, welded and machined Cpjdjyhzhuopfx Aa Njw Ø150x820 mm, crowned, shaft mounted in plummer blocks. Drive: Shaft-mounted gear motor 1.1 kW, belt speed 0.77 m/sec Connection 230/400V, 50Hz, protection class IP54 Drive prewired to motor terminal box (Commissioning must be performed by qualified electricians) PVC conveyor belt DM 15/4 0+007 PVC including PVC wave edge, green Belt width: 800 mm 2 pcs. wave edges, 80 mm high, 50 mm wide, high-frequency welded 32 pcs. T-50 cleats, approx. 355 mm spacing Belt material: 2-ply, especially cross-stable At the bend, the belt is guided on both sides by 3 hold-down rollers each. The belt features a 70 mm edge-free zone on each side. Due to the wave edge on both sides, the usable belt width is reduced: Usable width: 490 mm, calculated as follows: (top view) transverse arrangement 100+50+5+490+5+50+100 mm Discover custom solutions for your industry! As an innovative mechanical engineering company, we are proud to offer tailored solutions for the recycling, food, and processing industries. Our extensive product portfolio ranges from conveyor systems and flat conveyors to incline conveyors, angled conveyors, and Z-conveyors. In addition, we manufacture feed hoppers, magnetic separators, overband magnetic separators, drum magnetic separators, and dosing bunkers – all according to our customers’ specific requirements. We understand that every industry and project is unique. That’s why we customize our solutions to your individual needs and specifications. Complex projects are an exciting challenge for us, and we look forward to working with you to develop innovative solutions. With us, there is no such thing as a special solution – we find the right solution for every problem! Challenge us! Contact us and discover how we can transform your requirements into customized solutions. Together, we will shape the future of your production processes! Conveyor, conveyor system, discharge belts, belt conveyor, magnetic separator, overband magnetic separator, recycling, wood chips, plastics, metal-free metal detection, neodymium, overband magnet, magnetic belt separator, lifting magnets, filter rods, magnetic grids, magnetic grate, metal separator, block magnet, filter systems, dosing bunker, feed bunker, filling systems

Condition: new, Year of construction: 2026, functionality: fully functional, Aluminum Z-conveyor belt with base frame, including adjustable feet and freely swiveling transport castors with parking brakes. Horizontal section: 800 mm Inclined section: 3,000 mm Second inclined section: 1,200 mm Angle of incline at each bend: 60° Total conveyor belt length measured on the floor: 3,500 mm Height of the horizontal section: 400 mm Design: Cpodpeyhzhnefx Aa Njw - Aluminum construction with 2x reinforced profile, 90x45 mm - Full-surface discharge sheet, 2.0 mm, galvanized - Drive roller and deflection roller made from welded and machined S235 steel - Ø100x720 mm crowned turning, shaft fixed with pillow block bearings Drive: Parallel shaft geared motor 1.10 kW, belt speed: 0.53 m/sec Connection: 230/400V, 50 Hz, protection class IP54 Drive wired ready for connection up to the motor junction box (commissioning must be performed by a qualified electrician) PU conveyor belt DM 10/2 0+005 PU, including wave edge PU, petrol matt finish, AS, especially cross-rigid with hard cover Conveyor belt width: 700 mm 2 pcs. wave edges, 50 mm high, 25 mm wide, high-frequency welded 34 pcs. T40 cleats, centered, 430 mm long, spacing approx. 299 mm Belt material: 2-ply, especially cross-stable At each bend, the belt is guided on both sides with 3 hold-down rollers each. The belt is manufactured with a 70 mm edge-free zone on each side. Due to the wave edge on both sides, the usable belt width is reduced: Usable width: 500 mm, determined as follows: (top view) Cross-section 70+25+5+500+5+25+70 mm Belt guidance via PVC V-guide on the running surface, profile 10x6 mm - Includes cut-out in the discharge sheet - Includes slide bushings in the drive and deflection rollers

Condition: excellent (used), CATALOG NUMBER 7032 TECHNICAL SPECIFICATIONS - loading chute inlet: 1050x610mm - shredded wood outlet: Ø160mm - rotor working width: 580mm - main motor: 18.5kW - pump motor: 0.75kW - number of knives: 14 pcs - knife dimensions: 30x30mm - screen: 15mm x 20mm - pressure drawer - electric autoreverse - dimensions (L/W/H): 2000x1130x1530mm - weight: 970kg ADVANTAGES – German-made – autoreverse – pressure drawer – very good condition – used chipper Codjydc Nhjpfx Aa Nepw Net price: PLN 47,900 Net price: EUR 11,400 Net price converted at exchange rate 4.2 PLN/EUR (in case of significant exchange rate fluctuations, the price may change)

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 1 h, Compact Shredder typ PYTHON-XL 1600, with 15 KW electricmotor, 400V 50Hz• • Electric motorreductor 15KW, 400V, 3phs, 50Hz 40% MORE torque compare PYTHON 1600 Standard • Opening 1600 x 1000 mm • Main dimensions L 2700 x B 1400 x H 2600mm • Discharge opening 400x 100mm • Height discharge opening ca 1000mm Cjdpfxjvx Hkzs Aa Nspw • Electrical control box with INVERTER, main switch, selector switch on / off switch and emergency stop • Easily moved either with forklift or by means of lifting eyes • Weight approx. 2700 kg • Comprehensive machine manual • Finishing in RAL 3002 and RAL 7022 • (Subject to technical changes) • CE certified and "Made in Holland"

Condition: good (used), Year of construction: 2018, Slow-speed single-shaft shredder for various types of wood waste, including soft and hard dimensional wood in block or offcut form, waste from all types of wood-based panels, pallet and board waste with nails, as well as other forms of wood whose size does not exceed the dimensions of the machine's inlet. Cedpfxeymx Ufj Aa Nspw Basic information: Material to shred: wet sawmill waste Additional equipment: - segmented floor and ram surface (four-sided) - "fast hydraulic" system - ram comb - K-type insulated bearings - additional row of cutting knives on the rotor - screw chip conveyor (1200EU) - logspacer - additional outputs in the control cabinet for managing discharge belt conveyors

Condition: new, Year of construction: 2025, functionality: fully functional, SONDERANGEBOT! AUSVERKAUF! Neu mit Garantie Die Hammermühle MT-500 ist zum Zerkleiniern von Holzspänen, Sägemehl und Getreideabfällen konzipiert. Die Basis von Hammerbrechern ist ein Rotor mit darauf montierten Schlagelementen (Schläger, Hämmer). MT-500 Schlagmühle – Hauptvorteile Einstellbarer Mahlgrad des Materials; Die geringe Größe des Brechers ermöglicht den Einsatz auch in kleinen Räumen; Niedriger Energieverbrauch bei hoher Effizienz; Es ist nicht erforderlich, eine spezielle Basis zu bauen; Schneller Austausch von Sieben und Hämmern bei Bedarf; Möglichkeit der Zusatzausrüstung mit Zyklon; Zuverlässigkeit und Nutzungssicherheit; Option mit Zyklon +940 EUR Europäisches Produkt direkt vom Hersteller, Garantie, Ersatzteile verfügbar. Nettokaufpreis mit USt.Id.Nummer. Selbstabholung oder Lieferung nach Vereinbarung. Es besteht die Möglichkeit, die Maschine vor dem Kauf zu besichtigen und zu testen. Cedpfx Ajwi Itkja Nopw Ich freue mich auf Ihre Anfragen.

Condition: good (used), Slow-speed machine with moving floor Year of manufacture: 2007 Cjdpfx Aeykkwaea Nepw Rotor width: 630 mm 15 kW motor Only approx. 750 operating hours.

Condition: like new (used), Year of construction: 2012, power: 18.5 kW (25.15 HP), Rotor 260 mm Feed opening approx. 630 x 830 mm Rotor length approx. 630 mm Motor: 18.5 kW Number of knives: 30 Screen present Overhaul: - new motor incl. installation Cpedpfxeyfw D Ne Aa Nsw - new slide guide rails - calibration of the slider - new knives - new counter knives - completely new rotor - hydraulics checked / wear parts replaced - new flange bearing UCF 214 - new paintwork - adjustment / test run

Condition: excellent (used), Year of construction: 2012, Used machine from business closure. GROSS shredder - Model GAZ 62 - Year of manufacture: 2012 - 18.5 kW Cpedpfx Aajx Tp U Rj Njw - good condition - available immediately

Condition: excellent (used), Catalog number 6726 TECHNICAL DATA - Loading hopper inlet 280x300 mm - Discharge outlet for chipped wood Ø 310 mm - Rotor working width 340 mm - Main motor 22 kW - Number of knives 6 pcs - Dimensions (L/W/H) 1300x1150x1680 mm - Weight 720 kg Cpodpoignt Ujfx Aa Njw ADVANTAGES – very good condition – used wood chipper Net price: 19,900 PLN Net price: 4,740 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)