Used Hammon Construction Elevator for sale (18,319)

Condition: new, functionality: fully functional, machine/vehicle number: 12623007, empty load weight: 730 kg, maximum load weight: 1,270 kg, overall weight: 2,000 kg, axle configuration: 2 axles, loading space length: 3,280 mm, loading space width: 1,670 mm, loading space height: 2,300 mm, suspension: other, Year of construction: 2026, Load dimensions approx. 1670 mm x 3280 mm x 2300 mm External dimensions approx. 2130 mm x 4475 mm x 2705 mm Permissible total weight: 2000 kg Payload: approx. 1270 kg (payload varies depending on optional equipment) Manufacturer: Cheval Liberte Special features: - Aluminium horse trailer GOLD Origins (for 2 horses) - Polyester roof and front (aerodynamic) - Aluminium rear ramp / swiveling and pivoting with rubber coating - Saddle compartment, lockable - Roller blind (air and light permeable) - Shock absorbers mounted, including 100 km/h approval - Side door, lockable (large version) - Interior lighting, with switch - Vehicle documents included Additional equipment: - Aluminium floor with 8 mm rubber coating (glued and sealed) - Sliding windows on the left and right (tinted) - Divider bar at the front and rear (split / adjustable) - Center partition (removable) - Panic release Nedpfxsi R Hvts Afwjwk - Kick protection and side padding Chassis: - Knott | rubber spring axle | V-drawbar | automatic heavy-duty support wheel | reversing automatic Electrical system: - 12 volts | 13-pin connector | rear fog light If you would like to purchase this trailer or have further questions about trailers, please use our internal horse trailer reference number "No. 12613027".

Condition: used, all stainless steel loading height : ± 1.000 mm Nwjdpfxezht Hde Afwsk diameter of the screw : ± 350 mm outfeed height ± 1.600 mm length of the screw : ± 3.100 mm dimensions hopper: ± 900 x 800 mm dimensions: (l x w x h): ± 3.200 x 900 x 2.300 mm mobile

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, total height: 9,350 mm, total width: 3,980 mm, total length: 3,074 mm, load capacity per storage section: 380 kg, input voltage: 400 V, 3 pieces in stock Automated warehouse optimization storage system KARDEX Shuttle XP500 System Type : SHUTTLE-XP-500-3650x864 Control : C3000, with B/W OP3000 display Serial No. : 06009822 Year of construction: 2006 Load per tray: MediumX: 380 kg (proportionally distributed) Tray dimensions: 3650 x 864 mm Number of trays: 48 pieces (more on request) Dimensions Shuttle W x D x H: 3980 x 3074 x 9350 mm (height Kardex is adjustable to available height) Power: 3/N/PE400 V, 17 A, 50/60 HZ, 8.6 kVA This offer is valid provided system is unsold Technical details each Shuttle: - Maximum total capacity of the KARDEX Shuttle XP: 2 x 32,700 kg - Maximum tray capacity: 48 trays: 380 kg each, evenly distributed, More trays can be ordered. - Tray dimensions: 3650 x 864 mm - Machine dimensions: Wide x Depth x Height: 3980 x 3074 x 9350 mm - Footprint of the system appx: 12.23 m2 - Capacity with 48 trays: appx. 151 m2, every tray is appx. 3.15 m2 - Electronic volume measuring system in 25 mm screen (grid) - An access opening with sliding doors to protect people and stored goods - Control C3000, with B/W OP3000 display - LED Anti-dazzle lighting above access point - Use of toothed-belt for minimum noise - Use of toothed-belt for fastest order picking Price: On request only by e-mail Price: excl. VAT, including transport, assembly and warranty Nwjdpfxswgyxto Afwsk Delivery time: from stock Machinehandel De Leeuw BV is one of the few companies in Europe that trades and has in stock mainly used Kardex Remstar VLM automatic Lift & rotating warehouse systems. See our website for the current stock. We assemble and/or disassemble these systems in a safe manner with VCA certified technicians and we have been doing this for more than 30 years. We also dismantle other brands such as: Hänel, Electrolux, Bertello, Megamat, Lista, Denocard Machinehandel De Leeuw BV Oordeelsestraat 7 – b 5111 PA Baarle-Nassau The Netherlands

Condition: used, Year of construction: 2011, functionality: fully functional, total height: 8,550 mm, total width: 3,380 mm, total length: 3,074 mm, load capacity per storage section: 460 kg, input voltage: 400 V, 14 pieces Kardex Shuttles XP 500 of 8550mm Heights on stock Automated warehouse optimization storage system KARDEX Shuttle XP500 System Type : SHUTTLE-XP-500-3050x864 Control : C3000, with OP3000 OPGraphic color display Serial No. : 11002214 Year of construction: 2011 Total Load: 2 x 33,500 kg Load per tray: MediumX: 460 kg (proportionally distributed) Tray dimensions: 3050 x 864 mm Number of trays: 32 pieces (more trays on request) Dimensions Shuttle W x D x H: 3380 x 3074 x 8550 mm (height Kardex is adjustable to available height) Power: 3/N/PE400 V, 11 A, 50/60 HZ, 4.9 kVA This offer is valid provided system is unsold Technical details each Shuttle: - Maximum total capacity of the KARDEX Shuttle XP: 2 x 33,500 kg - Maximum tray capacity: 32 trays MediumX: 460 kg each, evenly distributed, more trays can be ordered. - Tray dimensions: 3050 x 864 mm - Machine dimensions: Wide x Depth x Height: 3380 x 3074 x 8550 mm - Footprint of the system appx: 10.39 m2 - Capacity with 32 trays: appx. 84 m2, every tray is appx. 2.64 m2 - Electronic volume measuring system in 25 mm screen (grid) - An access opening with sliding doors to protect people and stored goods - Control C3000, with OP3000 OPGraphic color display - LED anti-dazzle lighting above access point - Use of toothed belt for minimum noise - Use of toothed-belt for fastest order picking - Distances can be realized in steps of 25mm by arranging the support profile. a prerequisite for high compression storage Price: On request only by e-mail Price: excl. VAT, including transport, assembly and warranty Delivery time: from stock Machinehandel De Leeuw BV is one of the few companies in Europe that trades and has in stock mainly used Kardex Remstar VLM automatic Lift & rotating warehouse systems. See our website for the current stock. We assemble and/or disassemble these systems in a safe manner with VCA certified technicians and we have been doing this for more than 30 years. We also disassemble other brands such as: Hänel, Electrolux, Bertello, Megamat, Lista, Denocard Nwodpfx Afswnamyswek Machinehandel De Leeuw BV Oordeelsestraat 7 – b 5111 PA Baarle-Nassau The Netherlands

Condition: used, Year of construction: 2007, functionality: fully functional, total height: 5,980 mm, total width: 3,380 mm, total length: 3,074 mm, load capacity per storage section: 460 kg, input voltage: 400 V, Automated warehouse optimization storage system KARDEX Shuttle XP500 System Type: SHUTTLE-XP-500-3050x864 Control: C2000, with B/W OP2000 display Serial No.: Year of construction: 2007 Total Load: 2 x 33,500 kg Load per tray: 460 kg (evenly distributed) Tray dimension: 3050 x 864 mm Number of trays: 32 pieces (more on request) Dimensions Shuttle W x D x H: 3380 x 3074 x 5980 mm (height Kardex is adjustable to available height) Dimensions Shuttle D with full tray extraction table: 4198 mm Power: 3/N/PE400 V, 17 A, 50/60 HZ, 8.6 kVA This offer is valid subject to the system being unsold. Technical details per Shuttle: Nsdpewnankofx Afwjwk - Maximum total capacity of the KARDEX Shuttle XP: 2 x 33,500 kg - Maximum tray capacity: 32 trays Medium X Type 2, 460 kg each, evenly distributed; more trays can be ordered. - Tray dimensions: 3050 x 864 mm - Machine dimensions: Width x Depth x Height: 3380 x 3074 (4198) x 5980 mm - Footprint of the system approx.: 14.19 m2 - Capacity with 32 trays: approx. 84 m2, each tray is approx. 2.64 m2 - Electronic volume measuring system in 25 mm grid - An access opening with sliding doors to protect people and stored goods - Control C2000 with graphic display OP-C2000 B/W - LED anti-glare lighting above access point - Use of toothed belt for minimum noise - Use of toothed belt for fastest order picking - Distances can be realized in steps of 25 mm by arranging the support profile, a prerequisite for high compression storage - Automatic full tray extraction table Price: On request, via email only Price: excl. VAT, including transport and installation Delivery time: in stock Machinehandel De Leeuw BV specializes in used machines and accessories for the metalworking industry and used paternoster systems from, among others, Kardex, Hanel / Haenel, Electrolux, Bertello, Megamat, Lista, Denocard, and automatic storage systems such as the Kardex Shuttle XP and XPlus systems. Machinehandel De Leeuw BV Oordeelsestraat 7 – b 5111 PA Baarle-Nassau The Netherlands

Condition: ready for operation (used), Lift for one floor. Nwjdpfxjy U Na Ne Afwjk

Condition: new, Year of construction: 2025, GANNOMAT "MASTER 325" FRAME DOWEL AND MORTISE BORING MACHINE Specifically designed for staircase construction Complete in standard configuration according to price list 01/19/D, featuring: - Precision collet chuck for ER40 collets Ø 3-26 mm, incl. collets Ø 10 / 13 / 16 / 20 - Pole-switchable motor 1400/2800 rpm, 1.5 kW - Line laser with bracket Njdpexdttpofx Afwowk - Boring unit, continuously rotatable from the front (65°-0°-65°) - Position setting via digital counter - Position adjustment for 2 levels, pneumatic (0-100 mm) - Maximum boring depth 200 mm - Precision indexing rail with 12 mm pitch with central detent and lateral adjustment 320 mm - Complete stop system consisting of: 1 center stop and 1 stop for oversized frames 1 stop rod, approx. 850 mm long (can be reversed from left to right) 2 flip stops - Mortising unit lowerable, with 2 program cams (400V, 3Ph, 50Hz, 1.5 kW) Extraction funnel, dust-tested, Ø 80 mm Double miter stop adjustable from 0°-60° Pneumatic clamping of the X-axis with on/off switch at the indexing handle Pair of auxiliary workpiece supports, swiveling (left and right) Clamp column re-positionable to the front Chassis with 4 wheels for easy machine movement 1 piece Collet extension Ø 20 mm, incl. collet for drill shank Ø 9 mm 1 piece Baluster drill bit Ø 25 mm, chrome steel, with centering tip Available: at short notice

Condition: excellent (used), Year of construction: 1962, functionality: fully functional, The machine is in working order and equipped with adjustable chamfer and radius cutters. Nedpozp U D Hjfx Afwewk Technical data: Manufacturer: Kupfermühle Type: VUIN 750 Year of manufacture: 1962 Machine number: 8170 Working width: 750 mm Working height: up to 200 mm Planer heads: 140 × 200 mm Adjustable chamfer and radius cutters Powered infeed roller Segmented pressure bar Electric height adjustment Dust extraction pipes including collection manifold Condition: in working order Heavy-duty, durable machine construction for use in carpentry shops, sawmills, and timber processing plants. Inspection and test run possible by appointment.

Condition: good (used), Year of construction: 2021, Offer 23053 Technical data: - Load capacity per castor support 2000 kg - Roller dimensions Ø 60 x 100 mm - 8 support rollers - Hydraulic lifting device 50 mm - Lifting device must be operated by separate hydraulic unit Hydraulic unit + connecting hoses are not available Nwjdorl Iynopfx Afwjk - Space requirement approx. W 800 x H 350 x D 600 mm - Weight approx. 180 kg each

Year of construction: 2008, condition: good (used), - OFFER 21078 - Technical data: - Load capacity, electric chain hoist: 250 kg - Lifting speed, approx.: m/min - Chain hoist operation via handheld remote control - Manual operation: lifting mechanism / traverse and longitudinal travel - Track gauge, adjustable up to approx.: 3000 mm - Hook height, approx.: 2200 mm - Crane track length, approx.: 4000 mm Nwodsgl Ap Nspfx Afwek - Overall height, approx.: 3500 mm - Lower crane girder, approx.: 2700 mm - Lower longitudinal rail, approx.: 3000 mm - 4 steel supports made of rectangular tube 150 x 100 mm, H 3500 mm - 2 longitudinal frame supports, approx.: 4250 mm - Traverse frame support, approx.: 3000 mm - Weight of the system, approx.: 1000 kg

Year of construction: 2008, condition: good (used), - OFFER 21077 - Technical data: - Load capacity, electric chain hoist: 250 kg - Lifting speed: approx. m/min - Chain hoist operation via hand-held remote control - Manual operation: lifting mechanism / transverse travel + longitudinal travel - Track gauge: variable up to approx. 3500 mm - Hook height: approx. 2800 mm - Crane runway length: approx. 5000 mm - Overall height: approx. 3900 mm - UK crane support: approx. 3000 mm - 4 steel supports made of rectangular tube, 150 x 100 mm, H 3900 mm - 2 longitudinal travel carriage beams: approx. 5000 mm - Transverse travel carriage beam: approx. 3500 mm Nwjdpfsglu R Hox Afwsk - Weight of the system: approx. 1000 kg

Condition: excellent (used), We are offering this excellent hydraulic swivel bucket, Atlas T620 mounting, year of manufacture unknown. Model designation: Hydraulic swivel bucket, Atlas T620 mounting. If you have any questions or require further information, please feel free to send us a message or call us. Nodpsztnbtjfx Afwswk

Condition: new, Year of construction: 2023, operating hours: 1 h, functionality: fully functional, Oscillating feeder, unused except for a test run. Can be used for both our Steenbock system and the Senzani system for feeding material. Nwjdpfxozp Nxfs Afwsk

Condition: excellent (used), Year of construction: 1998, Hofmann HT 200 U frame dowel and elongated hole drilling machine with angle adjustment. Special drilling machine for staircase construction, window construction, and universal applications through pneumatic height adjustment. Angled dowel drilling and picket drilling can be easily performed thanks to the rotatable drilling unit. Motor with pole changeover, two speeds. Motor power 1.5 / 1.8 kW, 1400 / 2800 rpm. Motor start with a practical handle switch. Precision chuck with two inserts, 16 mm and M10 thread. Table size approximately 1100 x 240 mm. Linear laser for precise positioning of the workpiece. Drilling unit can be rotated 65 degrees to the left and right. Pneumatic adjustment of the processing height, dowel drilling on two levels without retooling. The desired drilling heights can be set for each drilling level using a handwheel and digital counter; the changeover is then performed pneumatically from the front. Cross adjustment approximately 320 mm, stepless or in a 12 mm grid. Drilling stroke approximately 200 mm. 2 pneumatic workpiece clamps, can be positioned at the front and rear of the table. 2 swiveling workpiece supports. Nwsdpfx Ajyfta Tjfwok 2 side stops, also usable as a front support. Undercarriage. Dust extraction connection 80 mm. 4 used but good drill bits, 9, 12, 16, 19 mm. Few paint spots have been touched up; very good condition, see original photos. A used, swiveling elongated hole drilling machine in this condition is rarely available. CE marking. Operating manual. Dimensions approximately 1200 x 1200 x 1200 mm (L x W x H), weight 310 kg. The machine can be demonstrated on site after prior arrangement. We only offer machines that are ready for demonstration and are in stock, see "other offers from this provider".

Condition: good (used), Window rubber, cutting machine, seal cutter -Hitches: 2 -Dimensions: 2500/600/H1000 mm -Weight: 15 kg Nsdpfx Ajb A Ncgofwjwk

Condition: used, Trailers, construction machinery trailers -Remark: Vehicle registration missing, electrical wiring missing / damaged -Trailer: Construction machinery trailer -Loading area: 2220/1085/H420 mm, border height 410 mm -Overrun device: HahnType ABV25. 1DZKE 2010 up to 2500 kg -Support load: 100 kg -Dimensions: 4175/2030/H980 mm Nwjdpfx Afjn Uy Awowek -Own weight: 650 kg -Handover: in the current condition as viewed

Condition: good (used), Canal construction brace, canal brace, canal support, construction support, shoring brace -Number: 8 struts available -Price: per piece -Canal construction brace: for trench shoring -Length: 1.40-1.65 m -Pipe diameter: Ø 42 mm -Support plate: 70 x 70 mm -Weight: 6 kg/piece Nodpfx Asct Aarofwswk

Condition: good (used), construction circular saw, circular saw Nedpfx Aod R N Injfwowk -Engine power: 2.6 KW -Voltage: 220 volts -Dimensions: 885/670/H810 mm -Weight: 42 kg

Condition: good (used), Hydraulic unit, hydraulic pump, hydraulic pump, universal unit, hydraulic station, Nwsdswbqawopfx Afwek -Manufacturer: Bosch, hydraulic unit -Engine: 11.1 kW 2760 rpm -Individual components: see photos -Dimensions: 1010/480/H1050 mm -Weight: 263 kg

Condition: good (used), Goods elevator, steep conveyor, height conveyor for thread rolling machine, flat-jaw thread rolling machine, vibratory conveyor Nwedpfx Ajtp Rfzjfwsk -Manufacturer: Tortona, freight elevator aligned with long screws -Elevator usable width: 700 mm -Maximum diameter: 16 mm -Individual components: see photos -Dimensions: 1450/900/H3040 mm -Weight: 960 kg

Condition: used, Elevator motor, gear motor, electric motor, stop motor, drive motor, crane motor, bridge crane -Manufacturer motor Flender type: LUGA-160LQ-04Y -Manufacturer gearbox Wittur type: SRP3100 -Power: 25 kW -Speed: 59.4 rpm -Construction: B3 Nodpsctvqaefx Afwjwk -Diameter shaft: Ø mm -Protection class: IP 54 -Brake -Number: 2x motors available -Price: per piece -Dimensions: 1060/660/H830 mm -Weight: 668 kg

Condition: good (used), Baumann NUP-650 Paper Stack Lift Nsdpszur D Ijfx Afwewk This machine is in very good condition. Hydraulic drive, state-of-the-art hydraulic unit. 400V power supply. Automatic and manual lifting cycles, fast operation. Load capacity: 650 kg. Pallet/sheet dimensions: 785 x 1150 mm. Documentation included.

Condition: excellent (used), Year of construction: 2002, We now have two Kardex Shuttle XP 500 units from 2002 in good condition available. These Vertical Lift Modules (VLMs) are a great solution for saving space and improving storage efficiency. Each tray is 2650 mm wide and 864 mm deep, and can hold up to 485 kg. The system helps speed up picking times and boosts productivity by using automated handling and flexible tray setups. This is a reliable model, and we can provide both original servicing and spare parts in the future. Machine specifications: Manufacturer: Kardex Remstar Manufacturing year: 2002 Model: SHUTTLE-XP-500-2650x864 Height: 7,000 mm Width vertical lift module / tray: 2,980 mm / 2,650 mm Depth vertical lift module / tray: 3,074 mm / 864 mm Nedpfewl Inmox Afwjwk Number of trays: Approx. 21 trays per lift Maximum weight per tray: 485 kg Electronics: 3/N/PE 400V, 3x17A

Condition: excellent (used), functionality: fully functional, Krupp/Hydraulic Hammer/Demolition Hammer/Chisel • Quick coupler: CW30, used • 2 hydraulic connections • Total weight: 1500 kg • Immediately ready for use • This offer is non-binding and subject to change. - Subject to prior sale, Nwedpfx Aozi Dnzsfwsk - Errors and/or typos not excluded. - Sale subject to our general terms and conditions.

Condition: used, machine/vehicle number: M348, Used Automatic filling triblock + cap elevatorTechnical Specifications & Performance DataThis Automatic Triblock Rinser-Filler-Capper with Cap Elevator is a compact 3-in-1 monoblock engineered for high-quality glass bottle packaging in industrial environments. Designed around gravity filling, it preserves alcohol content and aromatic profiles for premium spirits and still wines. The triblock integrates a rotary rinser with 9 grippers, a 10-valve gravity filler, and a single-head AROL capping turret, delivering reliable performance within a small footprint—ideal for industrial packaging, beverage production, and integration into a used bottling line or second hand bottling equipment upgrade.Production speed: up to 1,600 bph (at 0.75L)Container type: glass bottlesBottle formats: currently set up for 0.25L; speed reference at 0.75L, 100ML ( Mignon), 187ML (Single-serve size), 1,5L (Low-profile).Bottle diameter range: 55–110 mmBottle height range: 160–320 mmClosure currently: GPI 28/400 (wooden/plastic screw style)Monoblock configuration: 9-gripper single-treatment rinser; 10-valve gravity filler; 1-head AROL capping turretRotation direction: clockwise (left to right)Electrical supply: 380 V, 50 Hz, 3Ph + N + T; auxiliary 24 V DC; IP55Installed power: 7.0 kWPneumatics: 6 bar operating pressure; 200 Nl/min; 1/4" fittingsRinser water pressure: max 3 barProduct connection: DN25 TriclampFilling valve OD: 14 mm; minimum bottle mouth: 18.5 mmConveyor: acetalic (POM) chain, pitch 38.1 mm, width 82.5 mm; support 100x100 mm closed sectionWorking height: 1,000 mm ± 50 mmMachine dimensions (L x W x H): approx. 4000 x 1500 x 2100 mmMachine weight: approx. 3500 kgMaterial construction: AISI 304 stainless steelEquipped with pivoting timing screws, which allow precise centering on the conveyor even for small-diameter bottles (e.g. 100 ml / miniature)Filler: Height adjustment via an adjustable central column (raising and lowering by means of an internal screw). Filling valves can be adapted or replaced according to the required height range.Rinser: Nwodpfjzrgqqjx Afwek Standard height handling up to approximately 150–180 mm. Capability to process shorter formats using grippers with inverted/reversed jaws.Advanced Automation & Control SystemsThe monoblock features a stainless steel electrical cabinet assembled to EN60439-1, CEI17-13/1, and EN60204-1 standards with fully sealed connectors and flame-retardant cabling. Machine speed is finely adjustable via a front-panel potentiometer. The rinser motor is inverter-controlled (400 V) for smooth operation. Level probes govern an electropneumatic product inlet valve with adjustable opening/closing to prevent hydraulic shock. A PLC-read...