Used Handling for sale (10,519)

Condition: used, Electric pallet stacker - pedestrian stacker, drawbar stacker for the ergonomic handling of small loads Manufacturer EXPRESSO, Model Lift & Drive 225P (lift2move) Serial No. 19500S, Year of manufacture 2008 Model No. Rated load capacity 225 kg Lifting stroke 1680 mm Lifting height 2200 mm Lifting speed (unladen / laden) approx. 100 / 75 mm/s Outreach of lifting device 861 mm Chassis length 1020 mm Ground clearance 90 mm Underneath length 600 mm Chassis design (front / rear) Ø 80 / 140 mm (2 fixed / 2 swivel castors) Overall length 1400 mm Overall width 600 mm Overall height 2450 mm Motor power 400 W Battery capacity 24 V / 16 Ah - Electric lifting drive with motor brake / self-locking gearbox and precision spindle with safety slip clutch - Cable remote control with coiled cable and 2 lifting speeds - Battery pack with quick-change system Ksdpfx Aboflt Edo Nsnc - Battery charge indicator - 2 units of 12 Volt, 17 Ah lead-acid batteries installed in the battery pack - External charger 24 VDC, 3 Amps (mains voltage 230 V, 50 Hz) - Can be moved manually, swivel castors with three-stage parking brake - Handlebar infinitely adjustable in height - Load receiving flange according to EXPRESSO standard Special version: lifting device from GIESLER for radial fan SC-1000 CP XT (Tiger) - Load capacity of the lifting device 25 kg - Lifting device can be swivelled 90° via manual hydraulic pump - Opening width between the support jaws 300 / 330 mm - Opening width between the clamping rollers 200 - 300 mm - Clamping is done via handwheel - Weight of the lifting device 60 kg Total weight 140 kg very good condition

Year of construction: 2010, condition: used, Lifting table, lifting platform, lifting platform, car lifting platform, scissor lifting platform, cleaning bridge, scissor bridge, lifting device, material lifter, lifting device -Manufacturer: Schmidt Handling, lifting device -Load capacity: 100 kg -Lifting height: 725 mm Knsdpog N Tu Nefx Ab Njc -Platform: 545 x 285 mm, tiltable -Dimension: 400/380 / H1260 mm -Weight: 205 kg

Condition: good (used), Year of construction: 2001, functionality: fully functional, clamping force: 1,300 kN, screw diameter: 35 mm, clearance between the columns: 850 mm, ejector stroke: 575 mm, plate width: 650 mm, plate height: 650 mm, For sale is an Arburg 470 S 1300-675 injection molding machine. Technical specifications: Year of manufacture: 2001 Pump hours: 90,176 Automatic operation: 76,747 Clamping force: 1300 kN Opening stroke: 575 mm Distance between bars: 850 mm Minimum mold height: 275 mm Clamping platen size: 650 x 650 mm Knsdpfx Aowivkdob Nec Ejector stroke: 175 mm Ejector force forward/backward: 40 Nm Screw diameter: 35 mm 50 mm replacement cylinder available for an additional charge Geiger Handling MiniLiner 3.0 is included in the offer. Transport and loading can be arranged throughout Europe upon request for an additional charge. Prices exclude VAT. Viewings are available by appointment. Contact us; our team will be happy to assist you. Trade-in or exchange possible! Machine Purchase/Sale PURCHASE/SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality, yet affordable metalworking machine for your production? Or do you want to sell yours? For more information or to contact us, visit our website.

Condition: used, This listing is for 1 of 18 Qiagen BGR-Z-Modul Dt-1100uL Bez Handler with grippers. Each boxed in original packaging These units is in full working condition and ready for immediate use The Qiagen BGR-Z-modul Dt-1100uL Bez Handler with Grippers (Part No. 9015210) is a component designed for use with Qiagen's automated liquid handling systems, such as the BioRobot 8000. This module facilitates precise and efficient handling of 1,100 µL volumes, equipped with grippers to manage sample tubes or plates, enhancing the automation of laboratory workflows. Key Features: Volume Capacity: Designed to handle 1,100 µL volumes, suitable for various liquid handling tasks. Kodpfx Ajxv Dnhsb Nenc Gripper Mechanism: Equipped with grippers to securely handle sample tubes or plates, ensuring accurate placement and retrieval. Compatibility: Specifically designed for integration with Qiagen's automated systems, ensuring seamless operation and reliability.

Year of construction: 2019, condition: good (used), Aluminum cylinders with diameters of 140 mm and 90 mm, wall thickness 5 mm; a clamping ring secures the 50 mm shaft stub, which is turned down to 45 mm; shell length: minimum 2720 mm, maximum 2800 mm. 27 pieces of 90 mm diameter cylinders, 6 pieces of 140 mm diameter cylinders. Price applies to the total quantity. Knjdpfx Aey Nc H Eeb Nec

Condition: new, Year of construction: 2026, Robotic tray handling for deep-drawing systems – automated up to 120 cycles/hour JAC Automation & Robotics offers an automated handling solution for plastic trays that can be integrated into existing or new production facilities. The system takes over the automated handling of trays between the individual process steps, thereby significantly reducing the manual effort in production. The images shown are from an existing reference system that is currently in production. The system offered will be newly designed and built specifically for your application. Functionality: • KUKA industrial robots • product-specific gripper system • infeed and outfeed conveyor technology • automatic tray pick-up and placement • centering and positioning devices • control cabinet and system control • Siemens HMI for operation and recipe management • protective fencing and safety technology Depending on the product, different handling concepts can be implemented with clamping or suction grippers. The system can be flexibly adjusted to different tray variants via a recipe and parameter management system. Performance data: • Tray sizes: approx. 400 x 300 mm to 800 x 600 mm • Performance: up to approx. 120 cycles per hour • different tray heights and product variants possible • automatic product changeover via recipe management • manual and automatic system operation • individual adaptation to existing production facilities The specified performance applies without pad printing and depends on the product, gripper concept, travel paths, and system layout. Optional extensions: • automatic stamping system • pad printing system • automatic deburring • turning device for trays • additional conveyor technology • buffer and stacking locations • additional inspection and processing stations The existing reference system combines robotic handling, conveyor technology, stamping, pad printing, and a separate deburring station, among other things. Operation and control: Different products and recipes can be managed via the central Siemens HMI. Product-dependent parameters and position corrections can be set directly via the user interface. The control system offers, among other things: • recipe management • automatic and manual operation • adjustable product parameters • offset corrections • system and robot diagnostics • error and message history • user management Kodpfx Abez D H H Te Nonc • maintenance overview Advantages: • reduction of manual handling operations • reduced personnel costs • reproducible process sequences • reduced risk of handling errors • consistent production quality • more ergonomic workplaces • flexible processing of different tray formats • easy expandability with additional process steps • integration into existing production lines Important note: The system offered is not the reference system shown in the pictures. Each system is newly designed and manufactured according to the customer-specific requirements, the existing machines and the products to be processed. Price: upon request Upon request, JAC Automation & Robotics will handle the complete implementation, from design and robot programming to control cabinet construction and assembly, to commissioning the system.

Condition: ready for operation (used), Year of construction: 2007, travel distance X-axis: 100 mm, travel distance Y-axis: 550 mm, Manufacturer: Wittmann Model: W 702 Kjdpfsyk U Hrsx Ab Nsnc Year of manufacture: 2007 Can be inspected and tested!

Condition: used, Year of construction: 2006, machine/vehicle number: MPP Nr. 01 067, Machine: Flextrainer MPP Handle Applicator Kjdpfjz Ri Unsx Ab Nonc

Condition: good (used), Year of construction: 2010, robot handling device Sepro SR 4020 HL S3 y (x)=600 mm z (y) vert. =1100mm x(Z)=3500 mm (+C ) R1 year: 2010 price: 12.500 Euro Knsdpfxexltigj Ab Nec contact: Mr. Rainer Eckerle

Condition: good (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 420 mm, travel distance Y-axis: 950 mm, travel distance Z-axis: 650 mm, For sale is a Remak RX43 A handling system, which was installed on a Ferromatik injection molding machine The handling unit has been dismantled and stored in working order. Technical data Year of construction: 2008 Travel: 420*950*650 mm Power: 3 KW Max load: 100 kg Included: Teach Panel Switch cabinet Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Kodpst Rft Isfx Ab Njnc Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: excellent (used), fuel type: diesel, color: yellow, lifting height: 700 mm, mast type: telescopic, General information Year of manufacture: 2022 Year of construction: 2022 Model year: 2022 Operating hours: 406 Serial number: JCB5AAMGLN3100053 Technical information Chassis type: rigid Weights Empty weight: 7.220 kg Carrying capacity: 3.100 kg GVW: 10.320 kg Kodpfez S Aibsx Ab Nonc Functional Mast: telescopic (2 parts) Mast length: 7 m Lifting capacity: 3.100 kg Quick coupler system: Yes Condition Technical condition: very good Visual appearance: very good Financial information Price: On request Other information Emissions class: Stage V Additional information Please contact Ernst van Hek for more information

Condition: used, Electric dual-screw unit with automatic feed and pneumatic double stroke, mounted on a handling device, handling system, or manipulator for screwing applications. Screw unit: BÖLLHOFF / BOSCH REXROTH, type UVS-100-2-R-E The Böllhoff Uniquick Vario UVS-100-2-R-E dual-screw unit has a pneumatic double stroke controlled by Festo valves and cylinders. Various monitoring systems are also installed for complete automation. Screwdriver 1 consists of the following components: Rexroth, type: Servomotor Rexroth, type 0: Planetary gearbox Rexroth, type 0: Encoder Rexroth, type 0: Inline gearbox Screwdriver 2 consists of the following components: Rexroth, type: Servomotor Rexroth, type 0: Planetary gearbox Rexroth, type 0: Encoder Rexroth, type 0: Offset gearbox Dimensions (W x H x D): 165 x 1000 x 200 mm Pneumatic long stroke: 30 mm Pneumatic short stroke: 20 mm Screwdriver spring stroke: 20 mm Last used screws: M6 x 15 mm Electric screwdriver unit Rexroth Servomotor Rexroth Type: EC302 SZ3 Material number: 0 Torque: 0.6 Nm/A Peak torque: 0.7 Nm Speed: max. 20,000 rpm Current consumption: max. 7 A Weight: 0.8 kg Gearbox unit Rexroth Type: 3GE27 SZ3 Material No.: 0 Efficiency: 90% Gear ratio: i=18.9 Torque: max. 10 Nm Weight: 0.4 kg Installation length: 65.5 mm Encoder Rexroth Type: 2DMC012 SZ2 Material No.: 0 Nominal torque: 12 Nm Gear ratio: 1 Efficiency: 1 Weight: 0.55 kg Installation length: 118.5 mm Inline gearbox Rexroth Type: 2GA82 SZ2 1/4"SQ Material No.: 0 Spring travel: 20 mm Spring force: 16 - 34 N Tool holder: 1/4" square Maximum torque: 10 Nm Gear ratio: 1 Weight: 0.2 kg Installation length: 90 mm Offset gearbox Rexroth Type: 2VNA82 SZ2 1/4"SQ Material No.: 0 Spring travel: 20 mm Spring force: 16 - 34 N Kjdpfjfx Hyfex Ab Njnc Tool holder: 1/4" square Maximum torque: 10 Nm Gear ratio: 1 Weight: 0.6 kg Installation length: 153 mm Handling system: JÄGER HANDLING Type: Handy-flex 300 Horizontal movement: 400 mm Vertical movement: 450 mm Load capacity: max. 14 kg Handyflex reach: 250 to 650 mm Handyflex reach when pivoted up: max. 860 mm Rotation radius at full reach: max. 360° Vertical guide column: Ø 30 mm Horizontal guide columns: Ø 20 mm - Balancer for vertical movement - Adjustable load capacity - Adjustable stop for radius limitation Dimensions (L x W x H): approx. 1150 x 650 x 1400 mm Total weight: approx. 90 kg Good condition Without the blue steel pallet as a base plate The blue steel base plate is not included in the scope of supply.

Condition: used, Year of construction: 2009, Overview  This handle applicator was manufactured in 2009 by Italy TWIN PACK. The machine is designed for handle application on PET bottle packs. Production was stopped in July 2009 due to the permanent closure of the plant. The machine is still installed and can be visited in static on request. It has less than 500 operating hours and is available immediately. The reason for sale is a new project with installation of a complete new line. Technical data  - Capacity: 35 ppm - Formats: 1.5 L – 3×2 Knodpfx Abjy Etdgo Nec - Application: Handle application for PET bottle packs - Configuration: Not provided - Operating hours: Less than 500 hours

Condition: ready for operation (used), Year of construction: 2013, operating hours: 28,500 h, functionality: fully functional, load capacity: 235 kg, arm reach: 2,550 mm, load center: 300 mm, torque: 1,324 Nm, positioning accuracy: 0.07 mm, LOT scope: 3x welding robots for external connection 2x handling robots 5x control cabinets 5x main power cable for robot cabinet 5x communication cable for robot cabinet 5x panel with supply line to the cabinet Operating hours: between 28,500 and 39,000 hours Manufacturer: ABB Model: IRB 6640-235/2.55 Type: IRB 6640 M2004 Reach: 2.55 m Handling capacity: 235 kg Center of gravity of payload: 300 mm Wrist torque: 1324 Nm Positional repeatability: 0.07 mm Path repeatability: 0.7 mm 3x 400V AC 50-60 Hz 20 A Accessories: Control cabinet: Type: IRC5 M2004 Operating panel: FlexPendant Model: DSQC 679 Cable set: Main connection cabinet to robot Leoni add-on: Kedjz D H Drjpfx Ab Njnc Cable set for handling or welding

Condition: ready for operation (used), functionality: fully functional, fuel type: diesel, color: green, overall weight: 12,900 kg, maximum load weight: 3,800 kg, lifting height: 15,740 mm, Year of construction: 2007, operating hours: 6,100 h, machine/vehicle number: Roto 38.16, Equipment: UVV, all wheel drive, hydraulics, pallet forks, Rotating telescopic loader Technical data Working height: 15.74 m Lateral reach: 12.98 m Slewing range: 415° Length: 6.24 m Width: 2.24 m Headroom: 2.85 m Load capacity: 3,800 kg Load capacity, work platform: 300 kg Total weight: 12,900 kg Outriggers: Inclined outriggers Drive: Diesel Accessories: Forks Remote control available only for the platform function Driver's license class: 3/B Knodpfx Abstucp Te Nsc Dates/status UVV (German accident prevention regulation) valid until 03/2027 Operating hours: 6,294 hours as of 04/2026 Are you interested? Then we are always happy to assist you. You can reach us from Monday to Friday between 7:00 a.m. and 4:00 p.m.! The stated price is plus statutory VAT. Subject to change and errors!

Condition: used, functionality: fully functional, Separate single-position unit with a horizontal roller shaft, presumably with pneumatic clamping, housing/drive unit, pneumatic auxiliary functions, and its own control panel with a material length counter. Intended for the controlled feeding of web-shaped materials into a subsequent coating, laminating, or converting system. Manufacturer: Cavitec, Caratsch–Villars, Münchwilen, Switzerland. Model, year of Ksdpfx Abezt I U Tj Nsnc manufacture, serial number, electrical connection values, maximum roller data, and web speed are unknown due to the absence of a nameplate.

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, operating hours: 500 h, power: 5.5 kW (7.48 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 500 mm, cutting width (max.): 800 mm, control type: CNC control, roller diameter: 500 mm, pivoting range: 60 °, actuation type: electric, rotational speed (max.): 150 rpm, rotational speed (min.): 15 rpm, total height: 2,500 mm, total length: 13,000 mm, total width: 6,000 mm, overall weight: 10,000 kg, table height: 800 mm, Equipment: CE marking, documentation/manual, lighting, rotational speed infinitely variable, Here is the English translation: Complete Pegas Gonda Cutting Center with Pegas 540 Horizont X-CNC Band Saw We offer for sale a fully equipped Pegas Gonda cutting center, which has been used as our presentation, testing, and demonstration workplace at our production facility in Slavkov u Brna, Czech Republic. Pegas Gonda is a manufacturer of Pegas band saws and a supplier of complete cutting lines, including material handling systems – from the entry of bars into the saw to the sorting of finished cut pieces after the saw. The offered workplace has been in operation for approximately 3 years. We are offering the line as used equipment because our development continues, and we will be installing the latest version of the system with a new control system. The cutting center is designed for cutting semi-finished materials with a maximum input material length of 6,000 mm. The maximum material cross-section is 500 × 800 mm for straight cuts and 500 × 500 mm for mitre cuts. The line includes a Pegas 540 Horizont X-CNC band saw with a Siemens S7-1500 control system. At the saw output, there is an integrated conveyor system with a length of approximately 50 m, including a lateral transfer system for finished pieces into 3 buffer zones for subsequent collection of the cut material. Main parameters and equipment: * Complete automated Pegas Gonda cutting center * Pegas 540 Horizont X-CNC band saw * Siemens S7-1500 control system * Input material length up to 6,000 mm Kedpfezil Shjx Ab Nonc * Maximum cross-section for straight cuts: 500 × 800 mm * Maximum cross-section for mitre cuts: 500 × 500 mm * Integrated material handling system * Output conveyor system with a length of approx. 50 m * Lateral transfer of finished pieces * 3 buffer zones for sorting and collection of finished pieces * Used as a demonstration, testing, and presentation center * Location: Slavkov u Brna, Czech Republic The equipment is suitable for companies looking for a complete solution for automated cutting of bar material, including handling and sorting of finished cut pieces after the saw. Inspection of the equipment is possible by prior arrangement at the Pegas Gonda production facility in Slavkov u Brna, Czech Republic. I can further modify it into a more commercial, shorter, or technical version suitable for Machineseeker if needed.

Condition: used, Electric pallet stacker - pedestrian stacker, drawbar stacker for the ergonomic handling of small loads Manufacturer EXPRESSO, Model Lift & Drive 225 (lift2move) Serial No. 19153-HD, Year of manufacture 2010 Type No. Rated load capacity 225 kg Lifting stroke 1770 mm Lifting height 2350 mm Lifting speed (unloaded / loaded) approx. 100 / 75 mm/s Outreach of lifting arm 400 mm Chassis length 1130 mm Ground clearance 90 mm Underrun length 600 mm Chassis design (front / rear) Ø 80 / 150 mm (2 fixed / 2 swivel casters) Overall length 1130 mm Overall width 600 mm Overall height 2450 mm Motor power 400 W Battery capacity 24 V / 16 Ah - Electric lifting drive with motor brake / self-locking gearbox and precision spindle with safety slip clutch - Cable remote control with spiral cable and buttons for 2 lifting speeds - Battery pack with quick-change system - Battery charge indicator Knodpfx Asflt Egob Noc - 2 lead-acid batteries 12 Volt, 17 Ah installed in the battery pack, battery NEW - External charger 24 VDC, 3 Amperes (mains voltage 230 V, 50 Hz) - Manually movable, swivel casters with three-stage parking brake - Handlebar infinitely adjustable in height - Load receiving flange according to EXPRESSO standard 380 x 50 mm / 4 mounting holes M10 at a distance of 100-120-100 mm Mounted lifting attachment: Quadruple lifting fork, Expresso type, load capacity of the lifting attachment 40 kg - Lifting attachment can be swivelled by 90° by hand (can only be locked in the 0° position) - Lifting attachment can be moved laterally by +-100 mm on linear guide (locking only in the center) - Width between the support arms 320 mm - Height between the support arms (height can be locked at) 365 / 400 / 450 mm (max. opening width without locking hole 510 mm) - Depth between the support arms 150 mm to the stop bolt / 300 mm maximum Total weight 100 kg Good condition

Condition: good (used), Year of construction: 2015, robot handling device Sepro S5-15 S3 SPE x=500 mm y vert=700mm Z=2000mm (without R1 90°) Knsdpfxou N Dcyo Ab Noc year 2015 Stock: 1 · price: €14,500.00 contact: Mr. Rainer Eckerle

Condition: used, Max. speed: 20km/h, weight: ca. 19.4t, on-site inspection is possible. Kodpfxoz R A Rio Ab Nsnc

Condition: used, operating hours: 6,489 h, lifting height: 15,800 mm, motor manufacturer: Volvo-Diesel, Year of manufacture: 2019 Lifting capacity: 45.000 kg Ksdpfx Aboydmune Nonc Please contact Sales Team for more information

Condition: excellent (used), Year of construction: 2016, Geiger Handling EA Mini 2001 SL Knodpow Hy Iujfx Ab Nsc 4 pieces (2x year 2014, 2015, 2016), 1 pc. without remote control

Condition: used, Electric stacker – pedestrian stacker, tow stacker for ergonomic handling of small loads EXPRESSO Type Lift & Drive 125 (lift2move) Serial No. 194679 Year of manufacture 2015 Type No. 1418242111 Rated load capacity 125 kg Lifting height 1450 mm Kjdeflt Ebspfx Ab Njnc Total lifting height 1785 mm Lifting speed (unloaded / loaded) approx. 100 / 75 mm/s Outreach of lifting support 530 mm Chassis length 890 mm Ground clearance 90 mm Underrun length 490 mm Chassis design (front / rear) Ø 60 / 100 mm (2 swivel casters / 2 swivel casters) Overall length 890 mm Overall width 545 mm Overall height 1930 mm Motor power 250 W Battery capacity 24 V / 7.2 Ah - Electric lifting drive with motor brake / self-locking gearbox and precision spindle with safety slip clutch - Cable remote control with spiral cable and 2 lifting speeds - Battery pack with quick-change system - Battery charge level indicator - 2 pcs lead-acid battery 12 Volt, 7.2 Ah installed in the battery pack - External charger 24 VDC, 2.5 Amperes (mains voltage 230 V, 50 Hz) - Manually steerable, swivel casters with three-stage parking brake - Handle continuously adjustable in height - Load receiver U-profile for square profile according to EXPRESSO standard 210 x 45 mm / internal dimension 30 mm / 4 mounting holes M8 at a distance of 50-60-50 mm Mounted lifting support: Special design from GIESLER LAM-DC power rail Load capacity of lifting support 40 kg Weight of lifting support 24 kg Support rail laterally adjustable by +-90 mm via linear guides (3 locking points left, center, right) Support rail swiveling +-38° (infinitely adjustable and lockable) Support rail with 2 clamping jaws Distance between the clamping jaws 550 mm Material clamping thickness 100 mm Dimensions of material support W x D 650 x 155 mm Total weight 75 kg very good condition

Condition: good (used), Year of construction: 2009, Handling device Sepro SR Access 22 S3 DB Touch 2 x = 650 mm y vert. = 1400mm Z = 1500 mm (+ C + A) R1, R2, year: 2009, Price: 9.900 Euro, Contact: Mr. Rainer Eckerle Knjdped S Iucefx Ab Njc

Condition: new, MLS Lanny DDM Pressure Control System PN40 – 2x Shut-off Valve – 24V – NEW / UNUSED Offered for sale is a new, unused, high-quality industrial pressure control system from MLS Lanny GmbH, featuring a dome-loaded pressure regulator, two pilot-operated shut-off valves, and an electronic proportional control valve. This system is a professional, specialized assembly designed for industrial pressure and fluid technology applications. It is particularly suitable for mechanical and plant engineering, industrial pressure regulation, test bench technology, and as a spare part for existing industrial installations. The complete unit is constructed from robust, precision-engineered aluminum and brass components. Technical Specifications and Equipment 1. Dome-loaded pressure reducer – MLS Lanny GmbH Knodpsz R D Ntsfx Ab Njc Type: DDM D0 A0 (per nameplate; partially difficult to read) Pressure range: 0–20 bar Ratio: 1:4 Nominal pressure: PN40 Nominal size: DN54 Electrical control: 24 V DC 2. Two shut-off valves with pilot control Manufacturer: MLS Lanny GmbH Shut-off valves: PN40, DN35 Pilot valves: PN10 Operating voltage: 24 V DC Power consumption: 3 W per pilot valve Quantity: 2 complete valve units 3. Electronic proportional control valve Manufacturer: MLS Lanny GmbH Model: EFL1B99Ju V2_IP54 Operating voltage: 24 V DC Current consumption: 1.2 A Setpoint signal: 0–10 V Protection rating: IP54 Serial number: 137170 Design: Control valve with flange connection Condition NEW – UNUSED – STOCK ITEM The complete pressure control system is new and has not been put into operation. Minor surface marks resulting from storage may be present; these are visible in the original photos. The system is in the condition shown and is offered as a complete, pre-assembled unit. A recent functional and leak test has not been performed. Key Features High-quality industrial design by MLS Lanny GmbH Complete pressure-regulating and shut-off valve unit Two pilot-operated (electric) shut-off valves Electronic proportional control valve with 0–10 V setpoint signal Rugged aluminum and brass construction New and unused Ideal for mechanical engineering, plant construction, maintenance, and industrial spare parts supply Scope of Delivery Includes the complete MLS Lanny pressure regulation system shown, consisting of a dome-loaded pressure regulator, two pilot-operated shut-off valves, an electronic control valve, and assembled connecting components. Supplied as shown in the original images.