Used Hank for sale (3,489)

Condition: new, Year of construction: 2025, functionality: fully functional, 125 T C-Frame Servo Press with 50 T Ejector, DUPLOMATIC Hydraulics Reduced power consumption by up to 40% compared to conventional motors, thanks to servo-hydraulics. TECHNICAL DATA: - Press capacity: 20–125 T (adjustable) - Maximum installation height: 1000 mm - Usable table surface: 2200 x 750 mm - Usable ram surface: 980 x 750 mm Bljdpfx Ajx Aqtqjflsr - Ejector cylinder capacity: 50 T - Ejector cylinder stroke: 200 mm - Frame type: C-frame - Guide column diameter: Ø 100 mm (4 pieces, in corners) - Table height from floor: 870 mm - Overall dimensions approx. (W x D x H): 2400 x 2000 x 3300 mm - Approx. total weight: 8,700 kg - Clamping device for die centering: 50 mm diameter - Prepared for vibration dampening plates: 30 mm - Prepared for ROBO connection: yes HYDRAULIC CYLINDER: - Piston stroke: 0–700 mm (adjustable) - Max. operating pressure: 245 bar - Return speed: 300 mm/sec - Ram speed under load up to 25%: 25 mm/sec - Ram speed under load up to 50%: 14 mm/sec - Ram speed under load up to 80%: 7 mm/sec - Ram speed under load up to 100%: 6 mm/sec - Idle speed: 300 mm/sec HYDRAULIC POWER UNIT: - SERVO hydraulic pump (brand: DUPLOMATIC): 143 L/min (1 piece) - SERVO motor power: 15 kW (1 piece) - Pressure accuracy during pressing stroke: +/- 5 bar - Pre-fill valve: NG-160

Condition: used, machine/vehicle number: H2X396H00727, Year of construction: 2017, operating hours: 18,617 h, fuel type: diesel, mast type: duplex, color: other, Equipment: all wheel drive, Year of manufacture: 2017 Bodpfxoxzpf No Afljlr Empty weight: 14.230 kg Lifting capacity: 8.000 kg CE mark: yes Technical condition: good Linde H80D – Year of construction 2017 – 18,617 hours 8,000 kg lifting capacity – diesel forklift Are you looking for a strong and reliable forklift for intensive use? This Linde H80D from 2017 with 18,617 hours is designed to move heavy loads of up to 8,000 kg. Thanks to the powerful Deutz diesel engine and smooth hydrostatic drive, this machine delivers excellent performance in industrial environments. The forklift truck is equipped with a comfortable driver's cabin, good sight lines and is CE certified. Ideal for warehouses, construction sites or production locations where power, reliability and precision are important. Specifications: Year of construction: 2017 Hours: 18,617 hours Engine: Deutz diesel, 85 kW Lifting capacity: 8,000 kg Lifting height: 6 meters Drive: hydrostatic Clearance height: 4.38m CE certified Price excluding VAT For more pictures and videos please visit our website. Contact us for availability or a viewing.

Condition: used, Year of construction: 2016, functionality: fully functional, Shipping Line / Roller Conveyor System / Conveyor System, Conveyor Technology approx. 50 meters Manufacturer: RBS-Förderanlagen GmbH Model: Shipping Line Condition: Used Year of manufacture: 2016 The system consists of: 1 x Inclined belt conveyor, approx. 3.2 meters long 2 x Pneumatic lifts 3 x 90° degree curves Bjdpox Ala Ejfx Afljlr 2 x Flap elements / passage elements 1 x Control cabinet 25 pieces height-adjustable feet and the remaining conveyor line/roller conveyor Total length: approx. 50,000 mm Total width: 750 mm Conveying width: approx. 680 mm Roller diameter: 50 mm Internal item number: 2025120101 Features: Condition: fully functional, with signs of use Ideal for fast material handling Professionally dismantled and packed Collection address: Industriestraße 5 (47918 Tönisvorst) The conveyor technology was in operation until dismantling. Thanks to the excellent workmanship of the conveyor system, your material glides smoothly to its destination, even under heavy loads. Customized solutions for your intralogistics For roller conveyors, belt conveyors, inclined conveyors or telescopic conveyors for loading and unloading your goods, we are your competent partner! We are happy to provide you with a tailored offer or assist you with design or assembly questions. Simply let us know your requirements and local conditions. Benefit from our many years of experience and excellent network of professionals. We have already successfully completed projects for companies in a wide range of industries, such as logistics, pharmaceutical, trades or the electronics sector. Together we will find ways to optimize your processes and material flow cost-effectively and sustainably. We can also offer fully automated sorting technology or supplementary components such as picking shelves or containers.

Condition: used, This listing is for the Eeppendorf thermostat C Dry Block Heater The unit is in full working condition and is ready for immediate release Description Peltier technology enables comfortable and precise temperature control from -10°C to +110°C Blodpfx Aoxwc Nmjfler Heating and active cooling in all common vessel and plate formats from 5μL to 50mL Precise maintenance of various temperature levels Reliable prevention of condensate formation with optional ThermoTop™ (tect™) lid Highly flexible due to large selection of exchangeable SmartBlocks Dry incubation for improved lab hygiene Simple and intuitive operation due to predefined temperature keys (4, 16, 37, 56 and 95°C) Individually store up to 15 programs Comprehensive range of program functions Eppendorf Thermostat C is the ideal device to accurately set and maintain temperatures. The ThermoStat C features excellent temperature management. Peltier technology provides the comfortable and precise temperature control of all conventional lab vessels. The operation is easier and more intuitive than ever before. Predefined temperature keys provide quick access to five important experimental temperatures. Due to comprehensive program functions, you can also individually store 15 programs. With an extensive range of exchangeable SmartBlocks, the ThermoStat C adapts to any application. Key Features Heating and active cooling in all common vessel and plate formats from 5 μL to 50 mL Excellent temperature management Precise temperature control from -10°C to 110°C (110°C can be set when using the 12 mm and cryo SmartBlocks.) Precise maintenance of various temperature levels Reliable prevention of condensate formation with the optional ThermoTop® (tect) lid Maximum flexibility thanks to large selection of exchangeable SmartBlocks™ Dry incubation for improved lab hygiene Simple and intuitive operation due to predefined temperature keys (4°C, 16°C, 37°C, 56°C and 95°C) Comprehensive range of program functions 2 second block exchange due to quick release system of SmartBlock

Condition: used, mileage: 1 km, power: 1 kW (1.36 HP), fuel type: diesel, gearing type: other, axle configuration: 4x2, overall weight: 500 kg, empty load weight: 499 kg, maximum load weight: 1 kg, first registration: 06/2008, emission class: none, driver cabin: other, brakes: other, number of seats: 1, Year of construction: 2008, Dücker UNA 200 boom, Including Dücker MKL 10 flail mower, The basic implement is used to hold various implements, Ideal for municipal vehicles such as Multicar-Hansa-Ladog-Boki with corresponding municipal plate, Reach 3.40 meters, Transport width: 1.65 meters, Weight: 500 kg, Displacement of 1.15 meters, The implement can be used on the left, right and in front of the vehicle thanks to a hydraulic drive, Swivel angle implement 140°. If new TÜV approval is required, we will be happy to make you an offer from our partner workshops. Blsdpew U Afwefx Afljr Our offer is generally WITHOUT new TÜV approval, without new DGUV, without new SP, without new UVV. You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend a viewing and inspection of the goods to ensure that the buyer has no misconceptions about the condition and suitability of the goods. Inspections and tests are possible at any time by appointment and are expressly desired. All information is without guarantee. No liability is accepted for errors and incorrect information in the offer. The buyer is obliged to independently check the condition and equipment of the goods/vehicles. Subject to alterations, prior sale and errors excepted. - .

Condition: good (used), Year of construction: 2016, Multivac T300 Traysealer In new condition Multivac T300 traysealer with only 3.468 productionhours. This Multivac T300 is an entry-level automatic traysealer with a lot of benefits. Thanks to it’s compact design this machine is perfect for many production facilities with little space. Work fully automatic, press start and the machine does the rest. The machine can be easily set-up by the large touch screen display. Build in Busch vacuum-pump 100m3/h delivers fast production cycles 24/7 Machine will be shipped with 1 tool. The following tool sizes are available: If you need an other tool size we can deliver it for very comparative prices. Traysize 187 x 137 mm Traysize 227 x 178 mm (2 tools in stock) Traysize 278 x 187 mm Traysize 194 x 144 mm Traysize 208 x 160 mm (for SKIN-packaging) MANUFACTURER Multivac MODEL T 300 Bjdpfx Afevzx Sielelr TYPE automatic compact traysealer POWER SUPPLY 400/230V POWER 6kW EFFICIENCY 10 cycles per minute HEIGHT 170 cm WIDTH 110 cm LENGTH 320 cm WEIGHT 1100 kg YEAR 2016

Condition: like new (used), Year of construction: 2013, This floor-standing machine is designed for mixing a large number of dry products. Thanks to the planetary motion of the mixing tool, intensive and homogeneous mixing is achieved. The system consists of a stainless steel vessel—material 316L, mirror-polished, Ra < 0.8 µm—and a stainless steel housing, in which the vessel lid with the integrated mixing units and drives is installed. The mixing vessel has a capacity of approximately 90 liters (usable volume approx. 30 to 60 liters) and is placed and clamped onto two arms. The mixing material is filled in, after which the vessel is raised hydraulically, causing the mixing tool to immerse into the product. The mixer is equipped with a 45° spiral-shaped stainless steel mixing tool; the speed can be regulated via a gearbox. The mixing speed is adjustable—48, 82, 135, and 231 rpm. Vessel discharge is performed via a centrally located bottom outlet. Operation and control, including recipe and batch management, is performed via an operator panel on a separate stainless steel control cabinet. The operating language is English. The system is prepared for use in ATEX-rated (explosion-protected) areas. Electrical configuration: 230/400V, 3-phase, 50 Hz, IP55 Bodpfex Antuex Aflelr Space requirement: 90 x 130 x 235 cm Weight: approx. 850 kg

Condition: refurbished (used), Year of construction: 2005, travel distance X-axis: 4,000 mm, travel distance Y-axis: 3,000 mm, travel distance Z-axis: 1,200 mm, 5-axis gantry machining center CYPORT CP 4030 HIGHLIGHTS • 5-axis simultaneous machining thanks to 2-axis fork-type milling head with direct drives • Powerful milling spindle with 12.000 min-1 • Large Working space with smallest footprint • HEIDENHAIN iTNC 530 • All-round access to the workspace • Tool magazine with 48 pockets Travels X/Y/Z: 4,000 / 3,000 / 1200 mm Gantry passage Y/Z: 3,280 / 1,400 mm Rapid Feed X/Y/Z 30/30/30 Feed Force X/Y/Z: 10.000N 2-axis-NC-swivel head M21 of German manufacturer Cytec: Swivel range A-axis : +/-110° Swivel range C-axis +/- 360° Powerful milling spindle of German manufacturer Cytec: Tool taper: HSK-A 100 Speed: 12,000 rpm Power: 27/32 kW (100%/40% DC) Torque: 201/253 Nm (100%/40% DC) Tool magazine: Number of pockets: 48 pcs. HSK-A 100 max. tool diameter: 105/130 mm Bsdpfx Aeivn Eueflslr max. tool length: 300 mm max. tool weight: 8 kg Control: HEIDENHAIN iTNC 530 5-axis path control Electronic hand wheel HR 410 Coolant system Tank volume: 800 L external coolant supply: 20 bar internal coolant supply: 50 bar Paper band filter Coolant-airblast-changeover for external Coolant Work piece measuring system: Touch probe M&H - radio controlled Working area coverage Documentation CE-certification NEW COMPONENTS Ball screws NEW All bearings NEW Recirculating roller units for linear guideways NEW Tool Changer NEW Counterbalance cylinder NEW Lubrication distributors NEW All pipes and cables NEW All hoses NEW Bellow-types way covers NEW PVC-Lamellae NEW Safety Bumper NEW Electrics components (switches, relays, contactors, etc.) NEW Safety glass panes NEW Paint coating NEW REBUILT COMPONENTS C-Axis A-Axis Motor milling spindle Drive motors Hydraulic unit Hydraulic valves Complete Pneumatic system * All wear parts in the sub-assemblies have been replaced by new parts. The condition of the components corresponds to the high quality standard of the exchange program. REFURBISHED COMPONENTS Machine table Z-Ram X- and U-Carriages Y-Carriages Y-Crossbeam Caterpillar energy chains Coolant unit Central lubrication system Sheet metal enclosure * All structural parts have been inspected, sand blasted, reground / scrapped, measured and thereafter repainted. The accuracy of the structural parts is identical to that of our new machines. MADE IN GERMANY

Condition: like new (used), Year of construction: 2020, operating hours: 1,500 h, functionality: fully functional, USED Akira Seiki 1600XP Fanuc 0iMF Open Fronted Vertical Machining Centre with Fanuc Ex Stock - Subject to Prior Sale. YOM 2020, Machine with Very Low Hours Usage. Approx 1500 Hours  12,000 RPM Spindle with Refrigeration System  36 Station Arm Type ATC  Full Splash Guard  Fully Integrated Detron GXA-255h 4th Axis Nc Rotary Table with SR255H Tailstock Support Unit  Chip Conveyor & Chip Bin (Scraper Type)  Chip Flushing System Including Coolant Wash Gun Bljdpfx Aoq Nmm Tefljr  Through Spindle Coolant System - 35 Bars with Filter  Fanuc Memory Extension - 2 Mb  Fanuc 10.4 “ Screen with Manual Guide-I  Coolant Tank Capacity - 640 Litres  THK Heavy Duty Linear Guideways  Manual Pulse Generator  3 Colour Signal Lamp  Automatic Lubrication System  Rigid Tapping & Helical Interpolation Function TABLE Working Surface 1,750 X 800 MM Tee Slots 18 x 125 x 6.0 MM Spindle Nose to Table 100 ~ 915 MM Spindle Centre to Column 865 MM Table Load Capacity 2,300 KGS TRAVEL X-Axis Travel 1,630 MM Y-Axis Travel 850 MM Z-Axis Travel 815 MM SPINDLE Spindle Nose Taper BT-40 Spindle Speed - Max 12,000 RPM FEED Rapid Traverse (X & Y-Axis) 33 M / MIN Rapid Traverse (Z-Axis) 25 M / MIN Cutting Feedrates - Max 12 M / MIN ACCURACIES Positioning 0.01 MM Repeatability + - 0.003 MM ATC Tool Storage Capacity ARM TYPE - 36 STATIONS Maximum Tool Weight 7.0 KGS Tool Diameter - Max 75 MM Tool Length - Max 250 MM Tool Shank BT-40 Tool Exchange Time 2.2 SEC MOTOR Spindle Drive Motor (FANUC) 18.5 KW POWER SUPPLY Voltage 415V / 3PH / 50HZ Power Requirement 30.0 KVA MACHINE DIMENSIONS Machine Floor Space Requirement 4,820 x 3,576 MM Machine Weight 12,600 KG

Condition: used, This listing is for the Sartorius LA420Ss balance The unit is in full working condition and is ready for immediate use The Sartorius LA4200S is a high-precision top-loading balance from the renowned Masterpro Series, designed for laboratory environments requiring accurate and reliable measurements. With a blend of advanced features and robust design, it is ideal for quality-focused applications. Masterpro Series Highlights The Masterpro Series from Sartorius offers precision balances for mass measurement with capacities ranging from 0.1 mg to 64 kg. These balances include a broad range of high-performance features, making them particularly suitable for use as measuring and test equipment within ISO or GLP quality management systems. Key performance features include: isoCAL: Fully automatic self-calibration and adjustment function, triggered by time or temperature changes. reproTEST: Enables quick determination of standard deviation to verify the reproducibility of weighing results. ISO/GLP Printouts: Supports traceable documentation with compliant output. Menu Lock: Password-protected settings for secure operation. Bodpfx Afoxv Dg Djlolr Masterpro balances meet the highest standards for accuracy and reliability, thanks to: Advanced Vibration Filtering: Ensures stable results even in challenging environments. Stable and Reproducible Output: Critical for consistent data quality. High Visibility Display: Excellent readability in any lighting conditions. Durability: Engineered with a rugged weighing system for long-term use.

Condition: used, mileage: 1 km, power: 1 kW (1.36 HP), fuel type: diesel, gearing type: other, axle configuration: 4x2, overall weight: 500 kg, empty load weight: 499 kg, maximum load weight: 1 kg, first registration: 06/2008, emission class: none, driver cabin: other, brakes: other, number of seats: 1, Year of construction: 2008, Dücker UNA 200 boom, Including Dücker MKL 10 flail mower, The basic implement is used to hold various implements, Ideal for municipal vehicles such as Multicar-Hansa-Ladog-Boki with corresponding municipal plate, Reach 3.40 meters, Transport width: 1.65 meters, Weight: 500 kg, Displacement of 1.15 meters, The implement can be used on the left, right and in front of the vehicle thanks to a hydraulic drive, Swivel angle implement 140°. If new TÜV approval is required, we will be happy to make you an offer from our partner workshops. Our offer is generally WITHOUT new TÜV approval, without new DGUV, without new SP, without new UVV. You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend a viewing and inspection of the goods to ensure that the buyer has no misconceptions about the condition and suitability of the goods. Inspections and tests are possible at any time by appointment and are expressly desired. All information is without guarantee. No liability is accepted for errors and incorrect information in the offer. The buyer is obliged to independently check the condition and equipment of the goods/vehicles. Subject to alterations, prior sale and errors excepted. Blodsw U Afqjpfx Afler - .

Condition: new, Year of construction: 2024, overall weight: 300 kg, load capacity: 10 kg, arm reach: 1,300 mm, The BWCOR-09/13 is an innovative, programming-free welding robot arm that has been specially developed for modern automation. With this collaborative robot, you can rely on a future-oriented solution that impresses with its intuitive operation and does not require any complex programming. Equipped with a user-friendly 8-inch touchscreen teach panel and emergency stop functions, the BWCOR-09/13 enables quick and flexible set-up directly on site. Bsdpfx Afju Db Ntoljlr Thanks to the sophisticated control technology and freedom of movement in 6 axes, precise weld seams can be created without the need for complicated programming. With a working radius of up to 1360 mm and a load capacity of up to 10 kg, the BWCOR-09/13 is ideal for demanding welding applications in a wide range of industries. The advanced safety architecture with emergency stop and collision detection ensures safe human-robot collaboration. Due to its compact design and flexible mounting system, the BWCOR-09/13 can be installed in various positions, including wall and overhead mounting, making it the perfect choice for confined or demanding work environments. In addition, the extensive hardware interfaces and EtherCAT compatibility enable seamless integration into existing production lines. Take your welding processes to the next level with the BWCOR-09/13 - efficient, safe and future-oriented.

Condition: used, mileage: 88,000 km, power: 368 kW (500.34 HP), first registration: 08/2023, fuel type: diesel, energy efficiency: A, CO₂ emissions: 2 g/km, fuel consumption (urban): 25 l/100km, fuel consumption (extra-urban): 25 l/100km, fuel consumption (combined): 25 l/100km, color: white, driver cabin: other, gearing type: automatic, emission class: euro6, Year of construction: 2023, number of seats: 2, Adaptive Cruise Control (ACC), ZF Intarder, auxiliary heater, automatic climate control, multifunction steering wheel, disc brakes, differential lock, 78-liter AdBlue tank, Euro 6e emissions standard, AEBS (Advanced Emergency Braking System) emergency brake assist, passenger seat armrests, ASR (Anti-slip Regulation), automatic light function and rain sensor, COMFORT PLUS PACKAGE, roof and side spoilers, ECO roll function, electronic braking system (EBS), ESP (Electronic Stability Program), cab with electric tilting function, suspension: air suspension with 2 air bellows, transmission: 12-speed ZF Traxon automatic gearbox, rear axle 12 t, fuel tanks 600 + 450 L, refrigerator, LDWS (Lane Departure Warning System), Ford Ecotorq 12.7L engine, multimedia system with 7.2" touchscreen & truck navigation system, upper sleeper bunk with overhead storage compartment at rear wall, premium air-suspended driver’s seat with lumbar support, tire size: 315/70 R 22.5 | 2.47 axle ratio, tire size: 315/70 R 22.5, radio and infotainment system, wheelbase: 3,600 mm, SAF fifth wheel coupling with 1,100 mm coupling height, external sun visor, fuel tank side panels on both sides, front axle 8.0 t, predictive cruise control (route-based) Bodpewv Ap Hjfx Aflolr Note Despite careful verification of all our price labels, errors may still occur. In some cases, these are caused by transmission errors in the systems of various platform providers. We also cannot rule out mistakes originating on our part. Therefore, please note that all information is provided without guarantee and does not constitute a legal claim. A displayed price cannot be declared as a binding part of the contract. If you place particular value on a specific feature in our listing, please inform us of this when concluding the contract. We thank you for your understanding!

Condition: new, functionality: fully functional, A new control system for your machine – modern servos – new controller – up to 6 axes The Retrofit Kit V2.0 enables the existing scale of Maho 600 Series industrial machines to continue being used. Previously, digital operation required feedback from the motor to the servo amplifier. With the analog system, position feedback is routed to the CSMIO. This means that the motor encoder is now only required for the servo drives, no longer for the CNC controller. As a result, pitch errors can be eliminated thanks to the direct measurement approach. The kit for the Deckel Maho 600 Series includes: - 1 x Delta B3 Controller with 1500-watt output - 1 x Delta B3 Motor 1500 watts with brake - 2 x Delta B3 Controllers with 1000-watt output each - 2 x Delta B3 Motors 1000 watts - 2 x 5-meter encoder cables - 2 x 5-meter motor cables without brake - 1 x 3-meter encoder cable - 1 x 3-meter motor cable with brake - 2 x B3 plug-in boards without brake incl. 3 patch cables per board - 1 x B3 plug-in board with brake incl. 3 patch cables per board - 1 x BIG IO interface module - 1 x Maho Deckel & Co connection board - 2 x encoder boards - 1 x Digital Input 12-23 board - 1 x patch cable set - 1 x CSMIO IP-A controller - 1 x milling SIM software with customized interface - 1 x 24 V 10A power supply Bedpfoxz Dkgex Aflolr - 1 x power distribution unit with LED display - 1 x C2000 4.0 kW frequency inverter We are also happy to provide you with a quote for Deckel, Mikro, etc.

Condition: like new (used), Year of construction: 2020, operating hours: 1,500 h, functionality: fully functional, USED Akira Seiki 1600XP Fanuc 0iMF Open Fronted Vertical Machining Centre with Fanuc Ex Stock - Subject to Prior Sale. YOM 2020, Machine with Very Low Hours Usage. Approx 1500 Hours  12,000 RPM Spindle with Refrigeration System  36 Station Arm Type ATC  Full Splash Guard  Fully Integrated Detron GXA-255h 4th Axis Nc Rotary Table with SR255H Tailstock Support Unit Bsdpfeu A U Nksx Aflslr  Chip Conveyor & Chip Bin (Scraper Type)  Chip Flushing System Including Coolant Wash Gun  Through Spindle Coolant System - 35 Bars with Filter  Fanuc Memory Extension - 2 Mb  Fanuc 10.4 “ Screen with Manual Guide-I  Coolant Tank Capacity - 640 Litres  THK Heavy Duty Linear Guideways  Manual Pulse Generator  3 Colour Signal Lamp  Automatic Lubrication System  Rigid Tapping & Helical Interpolation Function TABLE Working Surface 1,750 X 800 MM Tee Slots 18 x 125 x 6.0 MM Spindle Nose to Table 100 ~ 915 MM Spindle Centre to Column 865 MM Table Load Capacity 2,300 KGS TRAVEL X-Axis Travel 1,630 MM Y-Axis Travel 850 MM Z-Axis Travel 815 MM SPINDLE Spindle Nose Taper BT-40 Spindle Speed - Max 12,000 RPM FEED Rapid Traverse (X & Y-Axis) 33 M / MIN Rapid Traverse (Z-Axis) 25 M / MIN Cutting Feedrates - Max 12 M / MIN ACCURACIES Positioning 0.01 MM Repeatability + - 0.003 MM ATC Tool Storage Capacity ARM TYPE - 36 STATIONS Maximum Tool Weight 7.0 KGS Tool Diameter - Max 75 MM Tool Length - Max 250 MM Tool Shank BT-40 Tool Exchange Time 2.2 SEC MOTOR Spindle Drive Motor (FANUC) 18.5 KW POWER SUPPLY Voltage 415V / 3PH / 50HZ Power Requirement 30.0 KVA MACHINE DIMENSIONS Machine Floor Space Requirement 4,820 x 3,576 MM Machine Weight 12,600 KG

Condition: used, This listing is for the UXF300 Revco UXF Freezer The unit is in full working condition and is ready for immediate use Design & Build Robust upright footprint with high storage density: The UXF300 offers around 14.9 cu ft (421 L) of internal volume while maintaining a compact footprint—thanks to advanced insulation that increases vial capacity by up to 4.2%, translating to 76% more storage within the same space. Single outer door with multiple inner layers: The outer door integrates a heated 4×7 gasket (four touchpoints, seven protective zones) to prevent frost and temperature loss. Inside, five polystyrene-insulated inner doors further conserve cold when accessing samples. Controls & Monitoring Touch-screen control panel: The intuitive display allows adjustment of settings, user authority levels, and monitoring of freezer health around the clock. Blsdpfx Ajxhd Hheflsr Extensive data logging: Built-in storage holds up to 15 years of temperature and event logs, which can be exported via USB. Remote integration: Supports 4–20 mA output or RS485 interfaces, making setup of external alarms and monitoring easy. Performance & Reliability Two performance modes: High‑performance mode provides tightest temperature uniformity and minimal fluctuation. Energy‑savings mode maintains acceptable control while saving up to 15% of energy

Condition: used, mileage: 1 km, power: 1 kW (1.36 HP), gearing type: other, axle configuration: 4x4, overall weight: 500 kg, empty load weight: 340 kg, maximum load weight: 160 kg, first registration: 09/2011, emission class: none, driver cabin: other, brakes: other, number of seats: 1, Equipment: all wheel drive, * Dücker extension arm UNA 200 * The basic unit is used to hold various implements * Reach: 3.40 meters * Transport width: 1.65 meters * Weight of basic implement 340 kg * Displacement of 1.15 meters * The implement can be used on the left, right and in front of the vehicle thanks to a hydraulic drive. Bljdpfx Asxl Skvofljr * Swivel angle of implement 140° * Year of construction: 2011 If new TÜV approval is required, we will be happy to make you an offer from our partner workshops. Our offer is generally WITHOUT new TÜV approval, without new DGUV, without new SP, without new UVV. You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend a viewing and inspection of the goods to ensure that the buyer has no misconceptions about the condition and suitability of the goods. Inspections and tests are possible at any time by appointment and are expressly desired. All information is without guarantee. No liability is accepted for errors and incorrect information in the offer. The buyer is obliged to independently check the condition and equipment of the goods/vehicles. Subject to alterations, prior sale and errors excepted. - .

Condition: used, maximum load weight: 28,930 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 01/2018, loading space length: 13,620 mm, loading space width: 2,480 mm, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, Vehicle Information - Cargo space length: 13,886 mm - Height: 4,000 mm - Width: 2,550 mm - Internal cargo length: 13,620 mm - Internal cargo width: 2,480 mm - Coupling height: 1,150 mm - Permissible total weight: 36,000 kg - Unladen weight: 7,070 kg Axles - Schmitz Cargobull with disc brakes - Tire brand: Hankook 385/65 R22.5 - Steel rims - Mechanical landing legs - 1st axle lift axle - Air suspension - Spare wheel holder - Wheel chocks - ABS Body / Mounted Parts - Side underrun protection open - Speed Curtain body - A-sign - Plastic toolbox Lighting / Electrics - Multi-chamber taillights (standard) - 2x work lights Paintwork - Tarp: RAL 3000 - Flame red Blodpfjx Axvyjx Afler

Condition: like new (used), Year of construction: 2022, x-travel 2500 mm y-travel 3500 mm z-travel 1500 mm Control HEIDENHAIN TNC 640 c-axis +-360 ° milling head -swivable ° milling head swivable ca. +-360 ° table dimension - longitudinal 2500 mm table dimension - cross 3500 mm table load 6 t/m² coolant IKZ 70 bar Feed speed 60 m/min. spindle turning speed range 24000 U/min tool taper HSK-A63 milling spindle motor S6 (40% / 2 min) 41 kW max. torque on the spindle S6 (40% / 2 min) 49 Nm milling spindle motor S1 (100% / 2 min) 34 kW max. torque on the spindle S1 (100% / 2 min) 39 kW tool change unit 60 Pos. weight of the machine ca. 74 t dimensions of the machine ca. 4 x 7.5 x 5.4 m This thermosymmetrical, ergonomic, universal ZIMMERMANN FZU32 portal milling machine is in mint condition and available immediately. DESCRIPTION: The FZU32 is a remarkably compact 5-axis portal milling machine for machining aluminium machining of aluminium, fibre composites, plastics, ureol and steel. steel. Thanks to the particularly rigid, newly developed centre-guiding gantry, we can meet the increasing requirements in model, tool and mould making. mould making. This thermo-symmetrical design makes the FZU32 less susceptible to adverse environmental conditions. Blodpfx Aevwgtyjflor

Condition: new, Year of construction: 2025, Holzkraft HBS precision wood band saws for the craftsman Top quality, workmanship and price-performance ratio Particularly quiet and precise running thanks to a torsion-free machine housing Large-dimensioned gray cast iron saw table made from one piece, with a precisely ground and polished surface. Quick saw band tensioning via eccentric lever on the back of the machine Standard with two speeds Precise 3 roller saw band guides, standard at the top and bottom from HBS 351 Quick cutting height adjustment via rotary knob and rack with millimeter scale Smooth-running aluminum parallel stop with eccentric quick clamp and magnifying glass Standard miter angle stop, adjustable by 60 degrees on both sides Aluminum parallel stop with eccentric quick clamp Technical data: Work table dimensions: 495*356 mm Cutting speed: 650/400 m/min Flywheel diameter: 356 mm Max. cutting height: 200 mm Max. cutting width with stop: 321 mm Saw band length: 2562 mm Precision guide 3 rollers: top/bottom Saw table inclination: -10 degrees, + 45 degrees Motor power: 550 watts/230 volts Weight: 80 kg Blodjvk Sdkjpfx Aflsr Dimensions in mm: 610*445*1753 Extraction nozzle diameter: 100 mm Location: from stock 54634 Bitburg - immediately available -

Condition: used, This listing is for 1 of 2 Watson Marlow 530S Peristaltic Pumps The units are in full working condition and ready for immediate release. Overview & Function The Watson‑Marlow 530S is part of their 500 series cased peristaltic/process pumps. Industrial Provider It’s used for precise fluid metering, dosing, or transfer in laboratory, industrial, pharmaceutical, food & beverage, water treatment, and other process environments. As a peristaltic pump, it works by compressing a flexible tube (or tubing element) with rollers or shoes, pushing fluid forward while the fluid never contacts moving mechanical parts (only the tubing). This gives isolation and reduces contamination risk Because fluid only contacts tubing, the risk of contamination or cross‑contamination is low, and maintenance is relatively straightforward (replace tubing / elements). Very good turndown ratio (i.e. ability to dial down flow finely) thanks to the wide speed control range. The user interface is designed for operational simplicity and clarity. Blsdpfxexv Ak Ij Afljr Offers flexibility in control: it supports analog and digital remote control, SCADA integration, and bus communication. Ability to use different pumpheads and tubing materials to suit pressure, chemical compatibility, and flow requirement

Condition: excellent (used), Year of construction: 2009, Bernardo FM 45 V drilling and milling machine. The FM 45 V drilling and milling machine offers an optimal price-performance ratio thanks to the standard spindle feed. The dovetail guide of the gear head ensures maximum precision and stability. Drilling capacity in steel 32 mm Drilling capacity in cast iron 40 mm Bjdovutw Hspfx Aflelr Throat 260 mm Spindle speed (12) 50 - 2520 rpm Spindle mount MK 4 Quill stroke 120 mm Quill feed (3) 0.12 / 0.19 / 0.26 mm/rev Table size 820 x 240 mm Distance spindle / table 40 - 485 mm Travel path (x / y) 550 / 190 mm Height adjustment of milling head 400 mm T-slot size 14 mm T-slot distance 55 mm Motor output power S1 100% 0.85 / 1.1 kW (400 V) Motor input power S6 40% 1.1 / 1.5 kW (400 V) Machine dimensions (W x D x H) 1150 x 850 x 1450 mm Weight approx. 285 kg Standard with automatic spindle feed and thread cutting device Large speed range 50 - 2520 rpm (12 levels) Dovetail guide for x, y and z axes, adjustable via wedge strips Versatile application options, slot milling, face milling, boring,.... Solid large cross table, precisely surface-machined Milling: spindle feed via handwheel Drilling: spindle feed via handwheel High-quality aluminum motor, designed for continuous operation Stable and vibration-free cast design Simple and quick speed change using a gear lever Pivoting milling head for angle drilling, milling bevels, etc. Location: from stock 54634 Bitburg - available at short notice -

Condition: used, This listing is for a IBICO Ibimaster 300 Multifunctional Comb Binding Machine The unit is in full working condition and is ready for immediate release. Specifications & Features It’s a multi‑functional binding machine that can both punch and bind documents. Canterbury Used Office Furniture Punching capacity: 21‑hole: ~ 20 sheets of 80 gsm paper at once 4‑hole (for e.g. 4‑hole filing): up to ~ 30 sheets Binding capacity: Up to ~ 500 sheets (80 gsm) using a 51 mm plastic comb Maximum punching width: ~ 315 mm (fits A4 / A5 width) Dimensions & weight (from used listing): ~ 425 × 125 × 425 mm, weight ~ 10.8 kg Bodpfoxv Ackjx Afljlr It supports simultaneous punching and binding thanks to its combined design

Condition: new, Year of construction: 2025, Maximum equipment for the professional. Multiple combination with TERSA cutterhead, miter cutting device and swiveling milling spindle. Ø 350 mm main saw blade with 118 mm max. cutting height, which is also achieved with the scoring saw blade installed Bjdpfx Ajcnxa Sjflelr Scoring device with separate motor and Ø 120 mm saw blade, easily and conveniently adjustable from the outside High-precision sliding carriage made of anodized aluminum on hardened and drilled steel guide rails Large boom (1200 x 650 mm) with roller and extendable aluminum telescopic fence up to max. 3300 mm Sawing unit swivels from 90° to -45 Pivoting milling spindle from 90° to -45° backwards into the milling fence Four milling speeds Right-left rotation of the milling spindle Quick change to thickness planer thanks to parallel opening jointer tables 2-stage feed in the thicknessing table Sharp toothed steel infeed roller for uniform wood infeed Three independent industrial motors With separate saw-parallel fence and separate feeder fence With lockable main switch Equipment details: Format fence Immediate control Boom Boom with angle-adjustable telescopic lay-off stop with graduation Sliding carriage with ball contact system made of anodized aluminum guides in hardened and ground steel F550S, 15% harder than conventional steel guides riveted and not glued light running, low noise and reliable 10 years HOLZKRAFT warranty on wear of hardened guideways cast iron double cradle saw unit height adjustment via dovetail guide extremely robust and torsionally stiff for precise cuts close to the saw blade, mounted on both sides height and inclination adjustable up to 45 standard scoring unit with separate scoring motor 0,55 kW double cradle scoring unit large-dimensioned swiveling double cradle milling unit made of cast iron milling stop heavy professional design the high quality cast iron fence is supplied with fine adjustment as standard 3-fold positionable for fast readjustment of the setting with fine adjustment via toothed rack, numerical display and aluminum fraise stop jaws Planer steel infeed rollers with helical teeth for a constant and uniform wood infeed solid backstops prevent the backstroke of workpieces 4-knife torsion shaft ensures an optimal planing pattern table lips for a quieter running Tersa planing cutterhead No more adjusting and screwing Change of planing knives in seconds Self-locking Especially low noise Thicknessing table The thicknessing table is mounted on four large-dimensioned spindles, which ensure high stability under all working conditions. Due to the special lifting device, the table position is perfectly maintained even without locking. Rip fence with fine adjustment and quick clamping stable round bar guide made of ground steel reversible aluminum ruler no measuring gap, guide rods are overlapping Separate dressing fence large professional design (1800 x 150 mm) 0-45° swiveling with quick adjustment stable round bar guide made of ground steel simultaneous opening Art: No. 5500557

Condition: new, Year of construction: 2025, Heavy-duty design of the entire machine High running smoothness thanks to new spindle design Industrial motor Blsdpfxsg Uaius Aflsr Separate emergency-stop pushbutton Drilling depth stop LED machine light integrated in the drill head Precisely machined, stable drilling table with diagonally running T-slots with circumferential cooling water channel Drilling table can be tilted ± 45° and rotated 360 V-belt cover with safety switch Precision spindle bore Machine operation Safety electrics in 24 V DC voltage. Guaranteed concentricity ≤ 0.02 mm measured in the drilling spindle Thick-walled steel column for high force absorption and stability Solid, large dimensioned base plate with T-slots Dimensions and weights Column diameter 92 mm Length approx. 945 mm Width/depth approx. 485 mm Height approx. 2040 mm weight approx. 162 kg Drilling capacity Drilling capacity steel (S235JR) 30 mm Continuous drilling capacity steel (S235JR) 25 mm Drilling table Working surface length 355 mm Working surface width 355 mm Type of T-slots diagonal T-slots size 14 mm T-slots number 2 Rotation 360 ° Inclination 45 ° Distance spindle - drilling table max. 784 mm Speed range Speed range 120 - 1810 min¯¹ Number of speed ranges 9 Electrical data Supply voltage 400 V Mains frequency 50 Hz Machine base Distance spindle - machine base max. 1470 mm Working surface length 230 mm Working surface width 300 mm T-slots size 16 mm T-slots number 2 Spindle quill stroke 125 mm spindle mounting MK 4 throat 270 mm Location: Ex stock 54634 Bitburg - immediately available- [...]