Used Hardinge Hlvh for sale (30)

Condition: used, Hardinge HLV-H High Speed Super Precision Tool Room Lathe Max’ Distance Between Centres 18” Max’ Swing over Bed 11” Max’ Swing Over Carriage 9” Max’ Swing over Cross Slide 6” Spindle Capacity: Though Spindle - 1 1/4” 5C Round Collets - 1 1/16” 5C Hex Collets - 7/8 5C Square Collets - 3/4” With Step Chucks – 1 1/16” to 6” With Jaw Chuck (Through Spindle) - 1 5/32” With Expanding Collets 3” Variable Spindle Speeds - 125 to 3000 rev/min Tailstock M/T 2 3 Phase Electrics Net Weight (approx.) 750Kgs Supplied with: 2 Axis Digital Readout 4 Jaw Chuck Faceplate 3 off Multifix Tool Holders Set of Misc’ 5C Collets For Sale Jet Machinery Ltd Jet Machinery Stock No: #79017 Machine Serial Number: HLV-H14793T Cost: £8,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Fpsdpjy Nfqmofx Aansp Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: like new (used), Year of construction: 2018, operating hours: 240 h, functionality: fully functional, travel distance X-axis: 460 mm, travel distance Y-axis: 460 mm, travel distance Z-axis: 410 mm, feed rate X-axis: 48,000 m/min, feed rate Y-axis: 48,000 m/min, feed rate Z-axis: 48,000 m/min, controller manufacturer: siemens 828D, controller model: 828D, total height: 2,602 mm, total length: 3,350 mm, total width: 2,265 mm, table width: 320 mm, table length: 320 mm, table load: 250 kg, rotational speed (max.): 200 rpm, overall weight: 6,200 kg, spindle speed (max.): 18,000 rpm, coolant supply: 20 bar, distance table center to spindle nose: 60 mm, spindle motor power: 23 W, spindle nose: hsk63, number of spindles: 1, number of slots in tool magazine: 40, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, Due to the cessation of business operations, we are offering this like-new Hardinge H320 horizontal machining center, manufactured in 2018. Model: H320 Serial number: GHLB7G0001 Date of manufacture: 05/31/2018 Fedpfx Aae Aazdxenopp Supply voltage: 400 V Number of phases: 3 Weight: 6200 kg Cooling on the ball screw spindles Spindle cooled Glass scales on all axes High-speed 4th axis with direct drive motor, 200 rpm Scraper chip conveyor It is also possible to take over the tool holders and machine clamps. If you have any questions or would like more information, please feel free to send us a message or call us.

Condition: good (used), Year of construction: 2011, XYZ: 760 x 610 x 610mm, Table 900 x 600mm, 21kW, Heidenhain TNC530, 12000 rpm, 30 station ATC, BT40 taper, Fsdpfx Aasz Rz Nqjnopp swarf conveyor, through spindle coolant,

Condition: used, Year of construction: 2011, Used 2011 Hardinge Bridgeport XR760. Supplied with Heidenhain iTNC 530 Control, 12,000 RPM Spindle with Through Spindle Coolant, 30 Station ATC, Renishaw spindle and table probing, Swarf Conveyor, Coolant Equipment & Manual Set. SPECIFICATION: TRAVELS: X Axis 760 mm, Y Axis 610 mm, Z Axis 610 mm Spindle Gauge Plane to Table (~ max) 710 mm, Spindle Gauge Plane to Table (~ min) 100 mm TABLE: Fjdpfxezzairj Aanepp Length 1000 mm, Width 600 mm T-Slot Width 18 mm, T-Slot Centre Distance 100 mm, Number of Std T-Slots 5, Max Weight on Table (evenly distributed) 900 kg SPINDLE: Max Rating 25 kW (S6 40%), Max Speed 12,000 rpm, Max Torque 159.2 Nm, Taper BT 40 Through Spindle Coolant, Coolant Flow Rate at Cutter 160 L/min, Through Spindle Coolant Pressure 20 bar (Std) FEEDRATES: Rapid and Jog (Max.) 20 m/min Cutting Feed Rate (Max.) 20 m/min BALL SCREWS: X & Y Axis 45 x 16 mm Z Axis 45 x 12 mm TOOL CHANGER: Type Rapid ATC, Capacity 30 Max Tool Diameter 125 mm (adjacent pocket), 80 mm Tool Length Max. 300 mm Tool Weight Max. 7 kg COOLANT & CHIP MANAGEMENT: Swarf Conveyor, Coolant Capacity 355 L Wash Down Standard, Wash Gun Standard, Cutter Air Blaster Standard Washdown Flow Rate 140 L/min ACCURACY – ISO 230-2: Positioning Accuracy 0.010 mm Repeatability 0.004 mm GENERALS: Machine Dimensions (W x D) 2528 x 3000 mm Air Required 4.9 cfm Power Supply 25 kVA / 415 V / 3 Phase / 50 or 60 Hz Control: Heidenhain iTNC 530 Spec: X760 Y610 Z610 mm | 12000RPM | BT40 Accessories: Renishaw Probing, Through spindle coolant, 30 Position Side mount tool changer, Swarf conveyor, Chilled 12000RPM Spindle

Condition: used, Year of construction: 2011, Used 2011 Hardinge Bridgeport XR300 5AX. Supplied with Heidenhain iTNC 530 Control, 12,000 RPM Spindle with Through Spindle Coolant, Renishaw probing, 30 Station ATC, Swarf Conveyor, Coolant Equipment & Manual Set. SPECIFICATION: TRAVELS: X Axis 410 mm, Y Axis 610 mm, Z Axis 500 mm A Axis +30° to -120°, C Axis Continuous 360° TABLE: Diameter 300 mm Max Swing Diameter 300 mm, Max Weight on Table (evenly distributed) 100 kg SPINDLE: Max Rating 25 kW (S6 40%), Max Speed 12,000 rpm, Max Torque 159.2 Nm, Taper BT 40 FEEDRATES: Rapid and Jog (Max.) 36 m/min Cutting Feed Rate (Max.) 20 m/min Fpsdpfezzax Tex Aanjp Rotary Axis Speed 25 rpm BALL SCREWS: X & Y Axis 45 x 16 mm Z Axis 45 x 12 mm TOOL CHANGER: Type Rapid ATC, Capacity 30 Max Tool Diameter 125 mm (adjacent pocket), 80 mm Tool Length Max. 300 mm Tool Weight Max. 7 kg COOLANT & CHIP MANAGEMENT: Swarf Conveyor, Coolant Capacity 355 L Wash Down Standard, Wash Gun Standard, Cutter Air Blaster Standard Through Spindle Coolant Coolant Flow Rate at Cutter 160 L/min Through Spindle Coolant Pressure 20 bar (Std) Washdown 140 L/min GENERALS: Machine Dimensions (W x D) 2528 x 3000 mm Air Required 4.9 cfm Power Supply 25 kVA / 415 V / 3 Phase / 50 or 60 Hz Control: Heidenhain iTNC 530 Spec: X410 Y610 Z610 mm A360| 12000RPM | BT40 Accessories: 5 axis Table, Renishaw Probing, Side Mount Tool Changer, Swarf conveyor

Condition: like new (used), Year of construction: 2021, Traverses X Y Z: 710 x 400 x 430mm, Table 800 x 400mm, table load 300kgs, Spindle speed 12,000rpm, Fjdpfx Aaoyt E Uxonspp Spindle taper CAT40, 5.5kW Spindle motor, FANUC Oi , 20 Station ATC, Coolant, Low Volt light, swarf conveyor

Condition: used, Year of construction: 2014, Hardinge GS200 CNC Lathe 2010 Hardinge GS200 CNC slant bed lathe equipped with Fanuc Series Oi-TD control. ----- Control Fanuc Series Oi-TD CNC Control ----- Capacity Chuck Size: 3 Jaw Bar Capacity: 52mm Fpodpfx Aoylchtjanep Maximum Swing: 457mm Maximum Cutting Diameter: 284mm Maximum Cutting Length: 406mm Distance Between Centres: Not specified ----- Main Spindle Maximum Spindle Speed: 5,000 RPM ----- Turret Number of Stations: 12 ----- Axis Travels X Axis Travel: 218mm Z Axis Travel: 406mm ----- Accessories Hydrafeed Multifeed 65 Barfeed Swarf Conveyor Control: Fanuc Spec: Spindle bore 52 mm | Max Swing 457 mm | Travel X 218 Z 406 mm Accessories: Tailstock, parts catcher & 8" Power Chuck, Swarf conveyor, Collet chuck

Condition: used, Year of construction: 2008, Travels X/Y/Z: 1020mm/610mm/610mm, table dimensions X/Y: 1300mm/600mm, max. table load: 900kg, spindle taper: SK40, spindle speed: 12000rpm, tool positions: 30, control: Heidenhain iTNC 530, machine operating hours: 27500h, spindle operating hours: 12700h. Including 3D touch probe, through-spindle coolant at 20bar, additional external air cooling and scraper belt chip conveyor. The machine was used in single-shift operation. Fedpsz Nwckefx Aanopp

Condition: used, 10’-0” x 84” HARDINGE CONICAL BALL MILLS MILL SPECIFICATION Model : 10’-0” x 84” HCBM Overall Dimensions : 3050 mm diameter x 5185 mm long. Installed Power : 400 kW Absorbed Power : 320 kW Mill Speed : 20 rpm Lining : Chrome Iron Cast Liner Plates Media : Steel Balls (30 tonne required) Drive : Girth Gear and Pinion, Gearbox and Slip Ring Motor Trunnion Bearings : No.1 Mill - Cooper Split Roller Bearings No.2 Mill – White Metal Bearings Fedpfxjzvgdle Aanspp The mills were operated by British Chrome & Chemicals Ltd (later Elementis Chromium), at their site in Cleveland, UK, processing Chrome Ore to a fineness of 99% passing 45 µm. The first mill, with the white metal bearings, was installed in around 1970. The second mill, with the Cooper Split Roller Bearings was installed in 1980. This mill is offered with a new set of Cooper Trunnion Bearings. Both mills were in operation until the site closed in 2009 and have been in storage ever since. Equipment is offered in "as is" condition with no warranty given or implied. PPDS can offer full refurbishment services. Inspection is invited at our premises in Uttoxeter, Staffordshire, United Kingdom (close to East Midlands, Birmingham and Manchester airports). Powder Process Design Services Ltd has been supplying equipment and systems to the industrial minerals sector for over 20 years. We specialise in the design and supply of minerals processing systems using a combination of new and s/hand refurbished equipment. With approaching 40 years experience we aim to deliver projects that meet and indeed exceed expectations. We have satisfied customers throughout the world, including, the United States, South America, New Zealand, South Africa the Middle East and the UK and Ireland. Please check out our other listings and subscribe to our stock list.

Condition: used, HARDINGE Conical Ball Mill 6’-0” dia x 36” ball mill for the dry grinding of industrial minerals. Fpedpfx Aaozvgvnonep Mill fitted with Manganese steel liners for operation will steel ball grinding media. White Metal Bearings on trunnions. 90 kW Motor fitted (could be reduced to 75 kW). Mill with countershaft drive but could be converted to gearbox.

Condition: good (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 540 mm, travel distance Z-axis: 540 mm, Manufacturer: Bridgeport / Hardinge Model: GX 600 Year of construction: 2008 Control system: Siemens 810D Machine type: CNC vertical machining center Axes: 3 (X, Y, Z) Travel distances: X-axis: 600 mm Y-axis: 540 mm Z-axis: 540 mm Fpedpfoz Rz Igex Aanop Distance from spindle nose to table: 145–685 mm Work table: Table dimensions: 750 × 540 mm Max. table load: 700 kg T-slots: 3 × 18 mm Main spindle: Spindle speed: 8,000 rpm Spindle power: approx. 15 kW Tool holder: SK40 Tool changer: Tool magazine: 20 positions Max. tool diameter: 94 mm Max. tool length: 250 mm Max. tool weight: 6 kg Tool change time: approx. 6 seconds Feed rates: Rapid traverse X/Y/Z: 36 m/min Max. working feed rate: 12,000 mm/min Accuracy: Positioning accuracy: 0.010 mm according to ISO 230-2 Machine data: Machine weight: approx. 5,260 kg Coolant tank: 230 liters Compressed air supply: approx. 5 bar

Condition: good (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: NVLA7K0128, travel distance X-axis: 480 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 330 mm, controller manufacturer: Fanuc, controller model: 0i-MC, total length: 1,575 mm, total width: 2,168 mm, table width: 400 mm, table length: 600 mm, overall weight: 3,000 kg, spindle speed (max.): 10,000 rpm, spindle motor power: 7,500 W, spindle nose: BT40, number of spindles: 1, number of slots in tool magazine: 16, Equipment: rotational speed infinitely variable, BRIDGEPORT HARDINGE GX480 Vertical Machining Centre. New 2007 With Coolant, Interlocked guards, Low Volt Light FANUC 0i-MC Control Machine Dimensions: 1575 x 2168 mm Machine Weight 3000 kg Spindle Motor Power 7.5 kW Spindle Speed 10000 rpm Table Size 600 x 400 mm Fpodpjxgqwdsfx Aanop Tool Change Capacity 16 Station Tool Size BT40 Traverses XYZ 480 x 400 x 330 mm

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, table length: 1,200 mm, table width: 600 mm, spindle speed (max.): 12,000 rpm, table height: 560 mm, table load: 900 kg, Machine with just revised spindle, never used after Fpedperb Amlefx Aanjp Connected to power and available for inspections and tests Lubrication through spindle 30 Tools Heidenhain 530

Condition: not inspected (used), Year of construction: 2003, turning length: 380 mm, turning diameter: 284 mm, spindle speed (max.): 5,000 rpm, overall weight: 2,300 kg, siemens Fpedex Rbwxspfx Aanjp maximum spindle speed: 5,000 RPM VDI turret, 12 stations tooling chip conveyor

Condition: ready for operation (used), Year of construction: 2011, travel distance X-axis: 710 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 430 mm, controller manufacturer: FANUC, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 20, number of axes: 4, This 4-axis Hardinge Bridgeport GX 710 was manufactured in 2011. It features impressive travels of 710 mm in the X-axis, 400 mm in the Y-axis, and 430 mm in the Z-axis. The machine is equipped with a spindle speed of 12,000 rpm and a tool changer capacity of 20 tools. If you are looking to get high-quality machining capabilities, consider the Hardinge Bridgeport GX 710 vertical machining centre we have for sale. Contact us for further details. Fpjde Agm Tqjpfx Aanep • Machine hours: approx. 16,000 • Accuracy: approx. 0.01 mm • Work history: mostly soft metals (~80%), plus plastics and a small amount of steel parts • Upgrades/retrofits: new X and Y-axis ball screws (~2021); spindle retrofit (~2020) • Status: under power Additional equipment • 4th axis: Hardinge HRP VC rotary table (160 mm center height) with tailstock • Tool probe Technical Specification Taper Size ISO 40

Year of construction: 2017, condition: ready for operation (used), X-axis: 607mm, z-axis: 286mm, spindle speed: max. 6000/min, control: Fanuc 32i A, length: 4600mm, width: 1600mm, height: 2700mm, weight: 2.1t, operating hours: 34,536h. With automation FMB Unirobot LR MATE 200iD7L-P2TB, grinding spindle Jäger HF-Spindle, chuck MicroCentric 4-410-3-QC, MARPOSS measuring system with automated dimensional compensation, oil mist filter S400, belt filter Knoll KF110/500, hinged belt conveyor 320 S1 and other accessories. On-site inspection is possible. Fjdpfxov Uz Ako Aanspp

Year of construction: 2021, condition: ready for operation (used), X-axis: 607mm, z-axis: 286mm, spindle speed: max. 6000/min, control: Fanuc 32i A, length: 1850mm, width: 1750mm, height: 1750mm, weight: 2.1t, operating hours: 14,841h. With FMB Unirobot GP7-5Pkhs automation system, Jäger HF spindle grinding spindle, MicroCentric 4-410-3-QC chuck, MARPOSS measuring system with automated dimensional compensation, S400 oil mist filter, Knoll KF110/500 belt filter, 320 S1 hinged belt conveyor and other accessories. On-site inspection is possible. Fpsdpfov Uz Aqsx Aanop

Year of construction: 2013, condition: ready for operation (used), X-axis: 607mm, z-axis: 286mm, spindle speed: max. 6000/min, control: Fanuc 32i A, length: 1850mm, width: 1750mm, height: 1750mm, weight: 2.1t, operating hours: 59,861h. With automation FMB Unirobot MH5LS-SP, grinding spindle Jäger HF-Spindle, chuck MicroCentric 4-410-3-QC, MARPOSS measuring system with automated dimensional compensation, oil mist filter S400, Liqui gravity filter UR1020 with clean tank and other accessories. On-site inspection is possible. Fjdpev Uz Adefx Aanspp

Condition: good (used), Year of construction: 2007, operating hours: 30,000 h, CNC Lathe Hardinge Quest 6/42 SP Technical Data and Scope of Supply TECHNICAL DATA Manufacturer: Hardinge Model: Quest 6/42 SP Year of manufacture: 2007 Control: GE Fanuc 18i-TB Supply voltage: 400 V Phases: 3 Frequency: 50 Hz Machine current: 78 A Spindle drive: 44 A Control voltage: 115/24 V Operating hours: approx. 30,000 h Spindle mount: A2-5 Bar capacity: 42 mm Chuck size: 150 mm Max. workpiece length with collet: 381 mm Max. workpiece length with chuck: 270 mm Max. turning diameter: 309 mm X-axis travel: 89 mm Z-axis travel: 406 mm Rapid traverse X-axis: 28 m/min Rapid traverse Z-axis: 38 m/min Turret: 12 station VDI 30 Indexing time: 0.1 s Machine length: 2,576 mm Depth: 2,025 mm Height: 1,905 mm Weight: approx. 5 t SCOPE OF OFFER Includes (not exhaustive): - CNC lathe Hardinge Quest 6/42 SP - Toolholder set - Chip conveyor - Transformer - Chip tray - Renishaw probe For the exact scope of supply, please refer to the photo documentation. The CNC Lathe Hardinge Quest 6/42 SP with Fanuc 16i/18i/21i control system from 2007 is a high-precision machine designed for a wide range of turning operations. It features a robust A2-5 spindle mount, a 42 mm bar capacity, and a 150 mm chuck, allowing flexible machining of different workpiece sizes. With a maximum turning diameter of 309 mm, even larger components can be machined reliably. The axes provide generous travel ranges of 89 mm (X) and 406 mm (Z), as well as high rapid traverse speeds, ensuring maximum productivity. The 12-station VDI 30 turret with an extremely short indexing time of 0.1 seconds guarantees fast tool changes and minimizes downtime. Thanks to the solid construction and the proven Fanuc control, the Hardinge Quest 6/42 SP is ideally suited for series production with the highest accuracy demands. Fsdpfxexflprj Aanspp No guarantee is given for the correctness, completeness or currentness of the information provided.

Condition: excellent (used), Year of construction: 2008, 3-axis CNC Lathe HARDINGE GS 250M CNC Fanuc Oi-TC Spindle hours: 6000h Specifications: Max swing over bed: 595 mm Max turning diameter: 356 mm Turning length: 558.8 mm Fjdpsykbarjfx Aanspp X-axis travel: 271 mm Z-axis travel: 600 mm Bar capacity: 78 mm Spindle bore: 89 mm Spindle speed: 3500 rpm Spindle power: 18.5 kW Spindle nose: A2-8’’ Options: 1 turret with 12 driven positions in VDI 40 C-axis with 360,000 positions 2 driven tools Fully programmable tailstock Automatic tool measurement probe Parts catcher 2 fixed tool holders 2 driven tool holders 1 3-jaw chuck 254 mm Tonfou

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, turning diameter over cross slide: 290 mm, turning length: 330 mm, turning diameter: 229 mm, spindle bore: 47 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 138 mm, controller model: Fanuc GE 18i-T, Hardinge Conquest T42 CNC turning center (2000) Controller: GE Fanuc Series 18-T, live tooling, C-axis option noted, tailstock included, 12-station turret, Spindle bore 47.6 mm, spindle speed 5,000 rpm, Max turning/machining diameter 229 mm, Fsdpfx Aaoyzbivjnspp Max turning length 333 mm, X travel 138 mm, Z travel 350 mm.

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 0500071, SPECIFICATION Table Size 600 x 320mm X axis traverse 450mm Y axis traverse 350mm Z axis traverse 380mm Spindle BT40 Spindle Speeds 0-8000rpm Spindle Motor 10kW Rapid feed rates all axes 30m/min Toolchanger capacity 12 Tools Toolchanger change time 8 Seconds Approximate Weight 2000Kg   Machine equipped with:- Siemens 810D Shopmill CNC Control Swarf auger Fjdetylazepfx Aanspp Lighting Coolant system Enclosed guarding

Year of construction: 2006, condition: ready for operation (used), Table dimensions X/Y: 1370mm/660mm, travel X/Y/Z: 1250mm/660mm/635mm, speed: 8000rpm, spindle mount: BT40, tool positions: 32, spindle-table distance: 790mm, control: Siemens 810 T. Documentation available. On-site inspection is possible. Fodpev Ubp Dsfx Aanepp

Condition: used, Year of construction: 2006, Technical details: turning diameter over bed: 284 mm turning dia. over face-slide: 380 mm turning length: 381 mm x-axis: 153 mm longitudinal traverse (z-axis): 406 mm control: Siemens 810D revolution per minute: 5000 U/min spindle bore: 52 mm tool turret - number of stations: 12 Stationen / Stations operating hours - idle run: 78000 h Fpodezrlvljpfx Aanep electrics - voltage/frequency: 400/50 V/Hz total power requirement: 11 kVA Weight approx.: 2,8 t dimension machine approx.LxWxH: 3,0 x 1,6 x 1,8 m The machine is equipped with a C-axis, enabling the use of driven tools. *

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, Controller GE FANUC 21i-TB Swing dia 533 mm Turning dia 340 mm Turning lenght 355 mm X travel 209 mm Z travel 355 mm Spindle hole D50,8 mm Fpjdpovw Uqajfx Aanjp Spindle speed 5000 rpm Chuck size max. D200 mm Turret 12-fold Rapid speed 30 m/min Spindle power 11 kW Spindle face A2-6 Tool holder type VDI30 C axis 0,001 degree (programmable) Dimensions LxWxH = 2300 x 1700 x 1700 mm Weight ca 3000 kg Features, accessories - Hydraulic chuck - Short barfeeder EMT Super 80 - Manual Guide in FANUC Software - Drive tool turret and C axis - Tailstock - Part catcher - Manuals Very good condition. The lathe works accurately and run quitely. Ready to buy immediately.