Used Vmx for sale (86)

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: M242-06206013CFA, travel distance X-axis: 610 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 610 mm, table width: 510 mm, table length: 760 mm, TECHNICAL DETAILS Hodpfx Acjy Dglnsrel Travel X-Axis: 610 mm Travel Y-Axis: 508 mm Travel Z-Axis: 610 mm Spindle Nose to Table: 152 - 762 mm Table Clamping Surface: 760 x 510 mm T-Slots (DIN 650): 5 x 18 H8 x 100 Table Load Capacity (evenly distributed): 1,500 kg MACHINE DETAILS AC Voltage: 400 V Phases: 3 Frequency: 50 Hz Connected Load: 18 kVA Largest Motor: 7.5 kVA

Condition: good (used), Year of construction: 2016, Traverses X Y Z: 610 x 508 x 610mm, Table 762 x 508mm, Spindle speed 40 – 8000 rpm, Spindle taper CAT40, 24 ATC, Hodpfjy Ex Haox Acrjl Rapid feedrate 24/30m/min, Spindle motor power 12/9kW, Low volt light, Hurco control, coolant.

Condition: used, Year of construction: 2003, x-travel 660 mm y-travel 355 mm z-travel 455 mm table surface area 760 X 355 mm table load 1,5 t T-slots 3 T-slot - width 18 mm control ULTIMAX 4 Hedpfxjyy A Ans Acrol tool change unit 16 max. tool diameter 90 mm max. tool length 200 mm max. tool weight 7 kg spindle turning speed range 10.000 U/min spindle drive 7,5 kW 16 St. tool adaptor SK 40 feed max 28 m/min rapid traverse 35/35/30 m/min dimensions of the machine ca. 1,8 x 1,9 x 2,4 m weight 3 t total power requirement 21 kW Used vertical machining centre with double-arm tool changer. HURO ULTIMAX 4 CONTROL 10,000 RPM

Condition: used, Year of construction: 2001, HURCO VMX 50 MACHINING CENTER MACHINE IS STILL UNDER POWER Hsdjy A Iqpepfx Acrel YEAR OF MANUFACTURE : 2001 ONLY 6.000 HOURS (approx. ) MEASURING PROBE FOR WORKPIECE POSITION DETECTION FROM TOOLMAKING: PROCEDURES : X : 1270 mm Y : 600 mm Z : 610 mm Size of the table: 1500 mm x 660 mm MAX. LOAD ON THE TABLE : 1300 KG. POWER : 15 KW SPINDLE SPEED : 10.000 RPM TOOL MAGAZINE : 24 STATIONS SPINDLE TAPER : SK40 WEIGHT : KG. 9.000Kg Only the machine no accessories

Condition: good (used), Year of construction: 2003, x-Weg 1270 mm Hsdpfxeiv R Hle Acrsl y-Weg 660 mm z-Weg 610 mm Steuerung Ultimax 4 Tischbelastung 1300 kg Drehzahl 10.000 U/min Werkzeugwechseleinrichtung 24-fach Werkzeugaufnahme SK 40 Antrieb 15 kW Tischgröße 1500x660 mm Gesamtleistungsbedarf kW Maschinengewicht ca. 9 t Raumbedarf ca. 4,8x4,5x2,95 m

Condition: ready for operation (used), Year of construction: 2001, travel distance X-axis: 610 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 610 mm, number of axes: 3, This 3-axis Hurco VMX 24 vertical machining centre was manufactured in 2001. It features X, Y, and Z travels of 610 mm each and a tool holder sk40. If you are looking to get high quality milling capabilities consider the Hurco VMX 24 machine we have for sale. Contact us for more information. • Spindle hours: 6,540 hours • New spindle was fitted in April 2021 • Chip conveyor is located within the working area • The axes were re-measured during the installation of the new spindle and found to be in order Optional • SK 40 holders Hodox D Hztepfx Acrjl • CNC high-pressure clamps (Allmatic and Homge) • Tall cabinets with cutter heads Technical Specification Taper Size SK 40

Condition: ready for operation (used), Year of construction: 2007, operating hours: 24,550 h, travel distance X-axis: 610 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 610 mm, controller manufacturer: HURCO, controller model: Utlimax 4, spindle speed (max.): 12,000 rpm, number of axes: 3, This 3-axis Hurco VMX 24t was manufactured in 2007. It features a SK40 tool holder and a spacious 610 x 508 x 610 mm travel in the x, y, and z axes, complemented by a maximum spindle speed of 12000 rpm. If you are looking to get high-quality milling capabilities, consider the Hurco VMX 24t machine we have for sale. Contact us for more information. Hjdpfox D Ibzex Acrjl • Axes re-measured on 03/23 and found OK; X axis resealed • The axes number 2 and 3 were re-calibrated and found to be in good working order • only the X-axis was resealed. • Spindle hours: 24,550 hours. Additional equipment • Conveyor belt in the work area Optional • SK 40 holders • CNC high-pressure clamps (Allmatic and Homge) • Tall cabinets with cutter heads Technical Specification Taper Size SK 40

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 762 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 610 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 20 m/min, feed length X-axis: 762 mm, feed length Y-axis: 510 mm, feed length Z-axis: 610 mm, nominal power (apparent): 22 kVA, controller manufacturer: Hurco, controller model: Max, workpiece weight (max.): 1,360 kg, total height: 2,775 mm, total length: 2,400 mm, total width: 2,200 mm, table width: 510 mm, table length: 1,020 mm, table load: 1,360 kg, overall weight: 4,900 kg, spindle speed (max.): 10,000 rpm, spindle motor power: 13,200 W, spindle nose: BT40, number of spindles: 1, number of slots in tool magazine: 24, input voltage: 400 V, type of input current: three-phase, Equipment: rotational speed infinitely variable, 2008 Hurco VMX30M Vertical Machining Centre Machine Type: 3 Axis Vertical Machining Centre Year: 2008 Control: Hurco Max Single Screen CNC Control Condition: Very Good High-Precision CNC Milling – Powerful, Rigid and Reliable 2008 Hurco VMX30M Vertical Machining Centre, in good working condition. Hjdsxy Iz Tspfx Acrol Engineered in the USA by Hurco Companies Inc., the VMX30M delivers precision 3-axis machining, high-speed spindle performance, and intuitive CNC control. This model is ideal for toolrooms, precision engineering, and production machining across metals and composites, offering impressive rigidity and productivity in a compact footprint. ⚙️ Technical Specifications – Hurco VMX30M Model/Type: Hurco VMX30M Vertical Machining Centre Year: 2008 Travels (X / Y / Z): 762 mm / 510 mm / 610 mm Table Size (W × L): 510 mm × 1020 mm Max Table Load: 1360 kg Spindle Taper: BT 40 Spindle Speed: 10000 rpm Spindle Power: 13.2 kW Tool Changer Capacity: 24 stations (ATC) Rapid Traverse Rates (X / Y / Z): 30 / 30 / 20 m/min CNC Control: Hurco MAX Single Screen Control Machine Dimensions (L × W × H): 2400 × 2200 × 2775 mm Machine Weight: 4 900 kg Condition: Good – ready for production use 🌟 Key Features and Advantages Rigid Heavy-Cast Iron Frame – excellent vibration damping and machining accuracy. High-Speed 10 000 RPM Spindle – perfect for aluminium, steel, and tool steel machining. Powerful 13.2 kW Drive – delivers consistent torque across the speed range. Generous Travels (762 × 510 × 610 mm) – handles large parts or multiple fixtures easily. 24-Tool Automatic Tool Changer – reduces setup time and increases throughput. Hurco MAX Control Interface – user-friendly conversational and ISO G-code programming. High Rapids 30/30/20 m/min – fast positioning for shorter cycle times. Robust Design and Proven Reliability – built for continuous industrial operation. 🧰 Applications Precision machining and mould manufacture Aerospace and automotive components General engineering and toolroom production Prototyping and small-batch manufacture Why Choose This Hurco VMX30M High-accuracy CNC vertical machining centre for precision metal cutting. Good condition and production-ready. Compact footprint with large working envelope. Proven Hurco control system for easy setup and fast programming. Available immediately with delivery across Ireland and the UK at an extra cost. *Specifications are given in good faith but not guaranteed* Hurco VMX30M for sale Used Hurco vertical machining centre Ireland Hurco VMX30 specifications Hurco VMX CNC mill for sale 3-axis CNC machining centre Hurco Used Hurco CNC machine UK Ireland Hurco VMX30M good condition Hurco CNC milling machine for sale Hurco VMX CNC with MAX control Used Machine Tools Ireland Hurco

Condition: good (used), Year of construction: 2012, functionality: fully functional, travel distance X-axis: 1,270 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 610 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 20 m/min, table load: 1,350 kg, spindle speed (max.): 12,000 rpm, Tool changer: 24 positions IKZ (internal coolant supply): 40 bar Probe: Renishaw Tool measurement: Renishaw Footprint (W x D x H) (Doors closed / without control / chip conveyor): 3250 x 2220 x 2950 mm Hodpfxsyx E Nnj Acrel Transport weight: 8,900 kg

Condition: excellent (used), Year of construction: 2014, Hurco VMX42i vertical machining center Year: 2014 WinMax control Table clamping surface 1270 x 610 mm Table load 1750 kg Travels X-axis 1067 mm Y-axis 610 mm Z-axis 610 mm Tool holder SK 40 Spindle speed max 12000 rpm Spindle power max 18 KW Tool changer 30 times Tool diameter max 80/76 Tool length 300 mm Machine weight 6850 kg Coolant tank 484 liter Accessories/options: - Through spindle coolant - Tool holders - Documentations - Remote control - Swarf conveyor Under power in our warehouse! Hedpfx Aceyuc Nverol

Condition: used, Year of construction: 2002, functionality: fully functional, The machining center has been inspected by a Hurco technician and found to be fully operational without any faults. Technical Data - Travel ranges: X 1,270 mm, Y 600 mm, Z 610 mm - Drive power: 30 kW - Spindle speed: 15,000 rpm - Spindle taper: SK 40 Type B - Feed rate: up to 23 m/min Work Table: - Dimensions: 1,500 mm x 660 mm - Max. workpiece weight: 1,300 kg Control: - Hurco Ultimax 4, incl. software for milling simulation - electronic hand control unit Hedpfx Acsx Iikbsrel - Interfaces: RS 232C / V24 - 2 monitors for text and graphics processing - 2 software units for plain text and ISO programming Machine Construction: - High rigidity, suitable for roughing operations Tool Changer: - Double-arm changer with 24 stations Equipment: - Cooling unit for milling spindle - Rinsing system for chip removal - Splash guard cabin - Coolant system with filtration - Internal coolant supply ICS 20 bar - Chip conveyor Machine Data: - Required space (without service areas!) LxWxH approx. 4,750 mm x 3,120 mm x 2,950 mm - Weight approx. 9,000 kg - Connected load 50 kVA, 400V, 50/60 Hz An inspection of the machine is possible by appointment. All tools and operating materials visible in the photos are not included in the scope of delivery. Technical changes and errors excepted.

Condition: like new (used), Year of construction: 2001, Parts shown by hand not come. Hedok Iugzepfx Acrsl

Condition: ready for operation (used), Year of construction: 2008, travel distance X-axis: 1,524 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 610 mm, table width: 660 mm, table length: 1,670 mm, spindle speed (max.): 10,000 rpm, number of axes: 3, This HURCO VMX 60 Vertical Machining center was manufactured in the year 2008. It is equipped with a MAX control unit and has 3 axis. The machine has a spindle speed of 10000 rpm. Machine Benefits Hsdeyi Ekxjpfx Acrel Qualitative Machine Benefits • Good condition Technical Machine Benefits • Tool turret 24 positions • Equipment various tools • Accessories chip evacuator

Condition: ready for operation (used), Year of construction: 2008, travel distance X-axis: 1,524 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 610 mm, spindle speed (max.): 10,000 rpm, number of axes: 3, This 3-axis Hurco VMX 60 was manufactured in 2008. A vertical machining center featuring a MAX Control system, it offers X-axis travel of 1,524 mm, Y-axis travel of 660 mm, and Z-axis travel of 610 mm. It includes a spindle speed of 10,000 rpm, a BT40 spindle taper, and a 24-position tool turret. Consider the opportunity to buy this Hurco VMX 60 vertical machining center. Contact us for more information about this machine. • Table size: 1,670 x 660 mm • Tool turret: 24 positions Additional equipment • Various tools • Chip evacuator Technical Specification Hjdpfx Acoygmtverol Taper Size BT 40

Condition: ready for operation (used), Year of construction: 2007, operating hours: 117,713 h, travel distance X-axis: 1,060 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, total height: 2,770 mm, table width: 3,750 mm, overall weight: 6,650 kg, product length (max.): 4,535 mm, This 3-axis Hurco VMX 42 was manufactured in 2007. It features an X-axis travel of 1,060 mm, Y-axis travel of 610 mm, and Z-axis travel of 610 mm. The machine includes a robust table size of 1,270 × 610 mm and a maximum table load of 1,100 kg. If you are looking to get high-quality machining capabilities, consider the Hurco VMX 42 vertical machining centre we have for sale. Contact us for further details. • Spindle Nose to Table: 150 – 760 mm • Feed Rate Programmable: 3 – 7600 mm/min • Feed Rate via Console: 3 – 11400 mm/min • Rapid Traverse X/Y/Z: 35 / 35 / 30 m/min • Guideways: Linear guideways (X, Y, Z) • Positioning Accuracy: ±0.01 mm • Repeatability: ±0.005 mm • Table Size: 1270 × 610 mm • T-slots: 5 (DIN 650) T-slot • Width: 18 mm • Distance Between T-slots: 100 mm • Maximum Table Load: 1100 kg • Automatic Tool Changer Type: Drum magazine • Number of Tool Positions: 24 • Maximum Tool Diameter: 80 mm • Maximum Tool Weight: 7 kg • Maximum Tool Length: 300 mm • Tool Holder: SK 40 (DIN 69871) • Pull Stud: ISO 7388/II Type B • Coolant Tank Capacity: 340 liters • Machine-Specific Data • Spindle Drive Power (Continuous): 18.0 kW Hedpfxsynil Rs Acrjl • Maximum Torque: 720 Nm • Torque at 1 min ED: 237 Nm • Spindle Speed Range: 10 – 12000 rpm • Mount Position (Assembly) • Measuring System: Photoelectric • Standard: Rotary motor encoder • Central Lubrication System: 1 pump (X, Y, Z) • Electrical Connection: 38 kVA / 55 A • Voltage: 400 V • Compressed Air Connection: 6 bar / 0.3 m³/min

Condition: ready for operation (used), Year of construction: 2004, operating hours: 73,420 h, controller manufacturer: HURCO, controller model: Ultimax, This 3-axis Hurco VMX 24 was manufactured in 2004, featuring a robust CNC control system, HURCO Ultimax. It offers a table size of 760 × 510 mm with a load capacity up to 850 kg. The spindle can reach speeds up to 15,000 rpm, and the machine includes a 24-position automatic tool changer. Ideal for detailed milling operations. Contact us for more information about this machine. Hjdpfx Ajyb Da Aocrel

Condition: ready for operation (used), Year of construction: 2006, operating hours: 63,442 h, controller manufacturer: HURCO, controller model: UltiMax, number of axes: 3, This 3-axis Hurco VMX 42 was manufactured in 2006. It features a tool tray with 24 positions, a chip conveyor, and a coolant tank with pump. Operating hours total 22,612.4, with spindle hours at 6,344.2. Consider the opportunity to buy this Hurco VMX 42 vertical machining centre. Contact us for more information. • Tool tray with 24 tool positions • Operating hours: 22,612.4 h Hedpfoyb Ryisx Acrjl • Spindle hours: 6,344.2 h Additional equipment • Chip conveyor • Coolant tank with pump

Condition: ready for operation (used), Year of construction: 2014, total height: 3,240 mm, overall weight: 8,880 kg, This 3-axis Hurco VMX 50i was manufactured in 2014, featuring a robust table size of 59 x 26 inches and a maximum spindle speed of 12,000 rpm. It supports a tool capacity of 40 with a rapid tool-to-tool ATC time of 2 seconds. Ideal for precise, heavy-duty machining with a maximum table load of 4,410 lb. If you are looking to get high-quality milling capabilities consider the Hurco VMX 50i machine we have for sale. Contact us for more information. • Table Size: 1500 x 660 mm • T-Slots: 6 x 18 mm • Maximum Weight on Table: 2000 kg Hedpfsx D E Eqex Acrol • Spindle Nose to Table: 101 mm • Maximum Spindle Speed: 12000 rpm • Spindle Power (15 min/Continuous): 15 kW / 11 kW @ 720 rpm • Spindle Torque (15 min/Continuous): 198.9 Nm / 116.7 Nm @ 720 rpm • Tool Type: CAT 40 / Big Plus® • Tool Capacity: 40 • Maximum Tool Diameter: 76 mm • Maximum Tool Length: 300 mm • Maximum Tool Weight: 7 kg • Tool-to-Tool ATC Time: 2 sec Dimensions Machine Depth 5055 mm

Condition: ready for operation (used), Year of construction: 1992, A Bridgeport CNC vertical machining center is available. Travel X/Y/Z: 1020mm/510mm/500mm, rapid traverse: 40m/min, feed rate: 10m/min, table dimensions X/Y: 1150mm/490mm, max. table load: 900kg, tool holder: BT40, tool stations: 30, machine dimensions X/Y/Z: approx. 2700mm/2550mm/2450mm, weight: approx. 3800kg. Documentation vorhanden. An on-site inspection is possible. Hjdpfeyw Sv Sex Acrel

Condition: ready for operation (used), Year of construction: 2010, operating hours: 18,571 h, functionality: fully functional, controller model: WINMAX, table width: 510 mm, table length: 760 mm, number of axes: 5, TECHNICAL DETAILS Table size: 760 x 510 mm Tool changer: 24 positions MACHINE DETAILS Control: WINMAX Hedpfxoxxlc Se Acrol Operating hours: 18,571 h EQUIPMENT Fully integrated 4th/5th axis Simultaneous milling 5th axis can be removed when not required

Condition: ready for operation (used), Year of construction: 2014, functionality: fully functional, travel distance X-axis: 1,270 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 610 mm, table load: 950 kg, spindle speed (max.): 10,000 rpm, TECHNICAL DETAILS Travel X-axis: 1,270 mm Travel Y-axis: 660 mm Travel Z-axis: 610 mm Table size: 1,500 x 660 mm Max. table load: 950 kg Spindle speed: 10,000 rpm Spindle taper: CAT 40 Rapid traverse X-axis: 30 m/min Rapid traverse Y-axis: 30 m/min Rapid traverse Z-axis: 20 m/min Positioning accuracy: ± 0.005 mm Hodpfjxxld Ajx Acrjl Repeatability: ± 0.0025 mm MACHINE DETAILS Weight: 9 t EQUIPMENT 24-position automatic tool changer (ATC) Standard cooling Various tools

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: H-H20140, travel distance X-axis: 610 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 610 mm, rotational speed (max.): 15,000 rpm, number of slots in tool magazine: 24, TECHNICAL DETAILS X-axis travel: 610 mm Y-axis travel: 510 mm Z-axis travel: 610 mm Table size: 760 mm x 510 mm System: SK40 Speed: 15,000 rpm MACHINE DETAILS Machine weight: 4,700 kg Control: Ultimax Hjdpfx Acsylk Eyorsl EQUIPMENT 24-position tool changer Internal coolant supply (IKZ) Chip conveyor Electronic handwheel

Condition: good (used), Year of construction: 2004, functionality: fully functional, travel distance X-axis: 610 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 610 mm, - ULTIMAX 4 control - toolchanger for 24 tools - coolant through spindle - chip screw - electronical hand wheel - measuring feeler Renishaw Technische Daten / technical details: Verfahrweg X / X-Travel 610 mm Hedox D A Ddjpfx Acrjl Verfahrweg Y / Y-Travel 510 mm Verfahrweg Z / Z-Travel 610 mm Tischgröße / table size 760x510 mm Werkzeugschaft / spindle taper SK40 Drehzahlbereich / spindle speed 10-10000 UpM /rpm Anzahl der Werkzeugplätze / tool places in ATC 24 fach Eilgang / rapid feed 30 m/min Gewicht der Maschine ca. / weight 4700 Kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: good (used), Hurco VMX64 / 40T Serial No. M64406503066FHA Year of manufacture: 2006 Spindle hours: approx. 4,200 h Power-on hours: approx. 5,900 h !!! Control upgraded to WINMAX (software version 2016, 09.01.393.53) !!! Hedsym R T Hepfx Acrel DXF option and network connection Travel distances: X: 1625 mm Y: 860 mm Z: 760 mm Clamping surface: 1675 x 890 mm Table load capacity: 2,500 kg Power: 15.0 kW Max. torque: 237 Nm Spindle/table distance: 150 - 910 mm Weight: 15,000 kg Dimensions (W x D x H): 6340 x 4400 x 3150 mm Features: - BigPlus spindle with 10,000 rpm - KNOLL band filter system - High-pressure coolant (IKZ) 20 bar - Tool magazine (hydraulic chain magazine), 40 slots - SK40 spindle - Chip conveyor - 6 NC hydraulic vices ATORN (125mm) The machine is in very good condition and ready for immediate use. All backlash has been adjusted, so the geometry is excellent. The control has been upgraded to WINMAX. Price plus loading costs of €1,500 For transport, a truck with 3 m width is required!

Condition: excellent (used), Year of construction: 2011, Winmax control Travel paths X/Y/Z: 760 x 510 x 610 mm Table clamping surface: 1020 x 510 mm Spindle speed: 12,000 min-1 Tool magazine for 24 tools, SK 40 Through-spindle coolant 20 bar Hedpeyncfwofx Acrol