Used Heating for sale (14,558)

Year of construction: 1990, condition: used, Capacity: 250 hl/h Pressure: 16 bar Length: 3.000 mm Ledpezty Hnsfx Afwohk Width: 750 mm Height: 2.246 mm Weight: 3150 kg Material: plates: 1.4404/0,8mm 196 WAP, 59 HHP, 3 AP / seals: Perbunan PRESS IN Base construction: clamping screw cap NIRO pedestal Features: 4-stages (heater, hot holding section, regenerative heat exchanger, pressure reduction), connections: DN65

Condition: used, Year of construction: 2002, Additional title: Wort cooling Lhsdpfx Aoztywtjfwek

Condition: used, A used Hanagata Heat Shrink Tunnel - compact size Lhedpfsyz Uzxox Afwok

Condition: excellent (used), The WZA is a ventilation unit in a cabinet design. Lsdpfx Aozr Rflsfwshk It provides supply and exhaust air functions with integrated heat and moisture recovery. The outdoor air supply is provided via a facade connection. The units were commissioned in 2023 but were only in operation for approximately 1 to 1.5 years. A total of 6 units are available. A complete purchase is preferred, but individual sales are also possible. Legal note regarding product safety (GPSR): This product has been demonstrably placed on the market in the European Union before December 13, 2024. Therefore, according to Article 54 of EU Regulation 2023/988 (GPSR), it falls under the legal transitional provision for existing stock. The obligation to subsequently record and display digital manufacturer contact information (such as specific email addresses) or modern online hazard warnings in the advertisement does not apply to this item.

Condition: defective spare-parts repository (used), Year of construction: 2009, operating hours: 2,000 h, functionality: limited functionality, machine/vehicle number: 870420, Electrically heated recirculation oven. Control system is defective. Repair offer is available. The control system needs to be repaired and the seals need to be replaced. Dimensions: width 2700 x length 2500 x height 1200 mm. Usable volume: 7.4 m3. Steam chamber: 10 m3. Heating capacity: 180 kW. Maximum temperature: 600°C. Max. air volume flow: 5000 m3/h. The oven also features a car bottom for loading/unloading and a wide, split door. The oven has seen little use. It is currently dismantled and in storage. Lsdexnx E Sepfx Afwohk

Condition: new, Cutting nozzles, Zinser Type: ZHD Propane Year of manufacture: NEW Lhjdezq Akdspfx Afwek Cutting nozzle ZHD-P 235 3100 202 6-10 mm Cutting nozzle ZHD-P 235 3100 203 10-20 mm Cutting nozzle ZHD-P 235 3100 204 20-30 mm Cutting nozzle ZHD-P 235 3100 206 45-60 mm Cutting nozzle ZHD-P 235 3100 207 60-80 mm Cutting nozzle ZHD-P 235 3100 208 80-100 mm Cutting nozzle ZHD-P 235 3100 209 100-160 mm Cutting nozzle ZHD-P 235 3100 210 160-230 mm Cutting nozzle ZHD-P 235 3100 211 230-300 mm Heating nozzle ZHD-P 235 3090 212 3-100 mm Heating nozzle ZHD-P 235 3090 111 100-300 mm 31726

Condition: used, Year of construction: 2021, type of input current: three-phase, input current: 120 A, input voltage: 400 V, We offer this used Chiossi & Cavazzuti Tetris 6M 1900 drying tunnel with a 6-meter heating section, manufactured in 2021. Power: 72 kW Phases: 3P+PE Current: 120 A Voltage: 400 V Frequency: 50/60 Hz Weight: 2500 kg Serial number: 2637 Product code: 1390081 Year of manufacture: 2021 If you have any questions or require further information, please do not hesitate to send us a message or call us. Lhodpfx Ajztplmsfwek

Condition: used, mileage: 60,000 km, fuel type: diesel, axle configuration: 4x2, wheelbase: 4,300 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: mechanical, number of gears: 6, emission class: euro6, suspension: steel, loading space length: 4,700 mm, loading space width: 2,200 mm, loading space height: 2,200 mm, Year of construction: 2020, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, navigation system, power mirror, tail-lift, Year of manufacture: 2020 Suspension: leaf suspension Front axle: Steering Empty weight: 2.990 kg Carrying capacity: 1.510 kg GVW: 4.500 kg Tail lift: Zepro Radiografisch, tail lift, 750 kg = Additional options and accessories = - 3 Seats - Airbag - Alarmsysteem class 1 - Camera system - Climate control - Comfort seat with heating - Heated driver's seat Ledpjznbb Nefx Afwjhk - Immobiliser - LED- lighting - Outside temperature display - Radio/CD/USB - Reversing camera - Roof and side spoiler - Side door - Toolbox stainless steel 3x = Remarks = Sub Woofer

Condition: used, functionality: fully functional, INATEC slot die coating system, type 100050 500 Lhodpozt Ip Rofx Afwsk Heated multi-nozzle coating head for continuous, web-width application of hot melt adhesive onto web-shaped materials. The bar features a number of pneumatically controlled individual coating heads, which can be switched on individually or together. Electrical heating power 11 kW, operating voltage 230 V, protection rating IP 44. Adhesive supply via external pump/drum melter. Manufacturer: INATEC GmbH, Leverkusen. Identification No. 950672. Year of manufacture probably around 1995.

Condition: used, Year of construction: 1994, functionality: unexamined, nominal heat output: 120 kW (163.15 HP), Mawera boiler in dismantled condition, complete with control cabinet and material feed, located below the silo discharge point, including all fittings. Additionally, a new, unused material transport screw for the combustion chamber is available. Lhsdjztz Dnopfx Afwsk Cash payment upon collection from the company premises – forklift available – individual parts may also be sold separately. We look forward to your interest.

Condition: good (used), functionality: fully functional, BDC 100T Hydraulic Moulding Press | Heated Platen Compression Press BDC 100T hydraulic moulding press for sale with heated platens. Approx. 100 tonne compression press for rubber, plastics, composites and laminating applications. Manufacturer: BDC Machine Type: 100T Moulding Press with Heated Platens Condition: Decommissioned. Good 100 Tonne Heated Platen Compression / Moulding Press This BDC 100T Hydraulic Moulding Press is a heavy-duty industrial press designed for heated platen moulding, compression moulding, forming, bonding and laminating applications. This machine is suitable for use in rubber moulding, plastics processing, composites, bonding, pressing, laminating and heated forming operations, making it a versatile addition to manufacturing, production and specialist fabrication workshops. Key Features 100 tonne hydraulic press capacity Heated upper and lower platens Heavy-duty industrial construction Suitable for compression moulding and heated platen pressing Ideal for rubber, plastics, composites and laminated materials Hydraulic pressing action for controlled force application Well-suited to production, R&D and workshop environments Machine Description The BDC 100T Hydraulic Moulding Press is designed for applications requiring high pressure and controlled heat. The heated platens allow materials to be formed, cured, bonded or compressed under consistent pressure, making the machine suitable for a wide range of industrial moulding and manufacturing processes. Hydraulic moulding presses of this type are commonly used for rubber moulding, plastic compression moulding, composite forming, gasket production, bonded components, laminating, hot pressing and specialist materials processing. Approximate Technical Specification General Manufacturer: BDC Machine Type: Hydraulic moulding / compression press Press Capacity: 100 tonnes Press Action: Hydraulic Construction: Heavy-duty industrial press frame Rams: 4 Platen Type: Heated platens Platen Arrangement: Upper and lower heated work platens Working Applications Compression moulding Rubber moulding Plastic moulding Composite pressing Laminating Hot pressing Bonding applications Heated platen forming Production and workshop moulding work Heated Platen System Heating: Heated platen system Platen Size: 510 x 510mm Temperature Control: Fitted with platen temperature control Platen Use: Suitable for controlled heat and pressure applications Press System Power: Hydraulic press system Force: Approx. 100 tonnes Operation: Hydraulic pressing cycle Pump Size: 2.2kW Ram Diameter: 190mm Distance Between Rams: 540mm (Width) Max Daylight: 250mm Typical Configuration: Heavy-duty hydraulic moulding press with heated work platens Ledjzi Hchopfx Afwjhk Summary The BDC 100T Hydraulic Moulding Press is a 100 tonne heated platen compression press used for rubber moulding, plastic compression moulding, composite pressing, laminating, bonding and hot press applications. It features hydraulic pressing action and heated platens, making it suitable for industrial manufacturing, workshop production and specialist materials processing. Important Notice Note: Specifications and information provided in this listing are supplied in good faith; however, their accuracy cannot be guaranteed. Specifications are approximate.

Condition: used, Year of construction: 2012, Wood chip heating system Fröling TX 250, output 250 kW, year of manufacture 2012, including feeding auger with backfire protection, including automatic ignition, including automatic ash removal, including control system, including complete system documentation (operating manual, electrical diagrams, assembly instructions, etc.). The system must be dismantled by the buyer; a forklift is available. The system has previously been operated with pellets but is suitable for wood chips. Bunker discharge and chimney are not included! The system is fully functional! The object will be connected to a district heating network, which is why the system is being sold. Lhodpfjvgf Ibex Afwjk

Year of construction: 2026, condition: as good as new (ex-display), Vacuum membrane press The VP series is the optimal solution for woodworking. The VP 3000 is equipped with heating technology, which reduces the drying time of the adhesive, thereby increasing performance. Possible applications: Veneering / Form gluing / Covering... Coating of various profiles (veneer, paper, plastic...) Wood bending: Production of curved and laminated components The heating system is equipped with temperature control Rubber membrane 2.5 mm Tabletop is made of plastic 12 mm Oil-free Becker vacuum pump 25 m3/h The control system of the vacuum / tank capacity 15 l Working area: 3000x1500mm Heating system temperature: Max. 60 degrees C Ljdjdvltyspfx Afwshk Heating system: 4.5 kW Pump power: 0.75 kW Vacuum pump flow rate: 25 m3/h Rubber membrane External dimensions: 3100 x 1650 x 1600 mm Weight: 450 kg Location: Available from stock in 54634 Bitburg - free loading -

Year of construction: 2026, condition: as good as new (ex-display), Vacuum Membrane Press The VP series is the optimal solution for woodworking. The VP 3000 is equipped with heating technology, which shortens the drying time of the adhesive, thereby increasing performance. Possible applications: Veneering / Form gluing / Coating... Coating of various profiles (veneer, paper, plastic...) Wood bending: Production of bent and laminated components Lhjdpfx Asdwh E Aofwsk The heating system is equipped with temperature control. Rubber membrane 2.5 mm Table top is made of plastic, 12 mm Oil-free Becker vacuum pump, 25 m3/h The control system for the vacuum / tank capacity is 15 l Working area: 3000x1500mm Heating system temperature: Max. 60 degrees C Heating system: 4.5 kW Pump power: 0.75 kW Vacuum pump capacity: 25 m3/h Rubber membrane External dimensions: 3100 x 1650 x 1600 mm Weight: 450 kg The machine is equipped with a chassis. Location: Available ex-stock in 54634 Bitburg - free loading -

Condition: refurbished (used), 105m3 horizontal steel tank with heating coil Lhsdpfexqfwtjx Afwok Diameter: 2.80m Length: 17.10m

Condition: used, 30m³ stainless steel tank features a full-height stainless steel coil Diameter 2.97m Total height 5.40m Cylinder height 4.30cm Leg height 30cm Cone height 30cm Ljdpfx Afsyw Ub Rjwehk Gear motor height 50cm

Condition: used, Thermopatch Lodjziivqopfx Afwshk Type: NL-15-SQR/R The NL-15-SQR/R is a sophisticated combination of advanced technology and modern, ergonomic design. The device heats up quickly and automatically switches to energy-saving mode when needed. The NL-15-SQR/R operates exclusively with compressed air and is the all-in-one solution for any application. The display is user-friendly. Intended use: This heat sealing press is particularly suitable for industrial applications where precise temperature control and the ability to use smaller sealing plates (140 x 140 mm) are required. Common applications include applying patches, transfers, or embroidery to textiles. Special features: Robust and durable: The machine is designed for intensive use and is popular in the textile industry as well as in other industries that require high volumes with medium to high temperature processing. High flexibility: The temperature range of 25 to 210 °C and the adjustable timer from 1 to 240 seconds offer flexibility for a variety of materials and applications. Efficient: The air pressure range of 3 to 6 bar and the air consumption of 3.01 liters per cycle make the machine efficient in operation. The Thermopatch NL-15-SQR/R is an industrial heat sealing press with the following technical specifications: Technical data: Power supply: 240 V Maximum power: 800 W Temperature range: 25 – 210 °C Timer: 1 – 240 seconds Dimensions (H x W x D): 470 x 540 x 470 mm Sealing plate (millimeters): 140 x 140 mm Noise level: < 70 dB Air pressure range: 3 – 6 bar Air consumption per cycle at 5 bar: 3.01 l Weight: 59 kg Condition: used Scope of delivery: (See picture) (Changes and errors in technical data and information are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, SNOL Type: SNOL 120/350 SNOL heating and drying cabinet up to 350°C Description: SNOL high-temperature drying cabinet 120/350 For industrial applications. Max. 350°C Internal volume 120 liters Internal dimensions 555x350x555 mm 400 volts, 50 Hz, 6 kW Vertical air circulation via integrated fan, over-temperature protection Chamber made of stainless steel Door hinge on the right, includes two shelves Low power consumption Fast heating and cooling times Powder-coated housing, RAL 7035 Condition: used Lhjdpfoziiutsx Afwsk Scope of supply: (See picture) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by telephone.

Condition: excellent (used), Year of construction: 2014, Viesmann Vitoplex 100 LS with Weishaupt WM - G10/4A Lhsdpetrl Skefx Afwsk

Condition: like new (used), Year of construction: 2020, operating hours: 14,000 h, functionality: fully functional, machine/vehicle number: 1455607, fuel: liquid petroleum gas (LPG), Jenbacher JMS612 in a container Electrical output: 2004 kW Thermal output: 2244 kW First commissioning: November 30, 2020 Operating hours: 14,800 h Condition: Like new System is still in operation. Full maintenance contract was in place until recently. Includes flue gas cleaning system (suitable for horticulture). Ledoztw Najpfx Afwohk

Year of construction: 1999, condition: used, Compressors, screw compressor, compressor heating, compressor heating, finned tube radiators, finned tube radiators, finned tube heating - frost guard -Manufacturer: Helios, finned tube radiator from screw compressor BlitzTyp Monsun 7.5 P .: 06010021 -Power: 230 V / 1000 Watt Lodpeu Rv Taofx Afwehk -Dimensions: 560/110/H160 mm -Weight: 3.3 kg

Condition: good (used), fan heater, heater, heat exchanger, air heater, air heater, duct air heater, duct air heater, heating register -Manufacturer: GEA Happel, air heater heat exchanger -Type: 4114/403/441 -Fan: Ziehl-Abegg -Operating pressure: max. 13.4 bar -Number: 2x air heaters available Ljdpfju Tytasx Afwshk -Price: per piece -Dimensions: 710/550/H495 mm -Weight: 60 kg/piece

Condition: good (used), Heat exchanger, cooling coil, cooling pipe, cooling spiral, shell and tube heat exchanger, seawater heat exchanger -Manufacturer: Funke, heat exchanger shell and tube heat exchanger -Type: BOF 807-0-4 -Contents: Jacket space bronze 35.6 l / Tube space copper 15.3 l -Operating pressure: max. 16 / 10 bar -Dimensions: 2480/360/H350 mm -Weight: 236 kg Lhsdpfowu S Tfex Afwek

Condition: good (used), Screw-in heating element, electric heater, electric radiator, heating coil, electric tubular heater, heating element, air heater, rod heater, heating rod, heating cartridge, high-performance heating cartridge -Type: HLP 220 V 500 W -Length: 165 mm Lhjdpfsb A Sdajx Afwok -Diameter: 13 mm -Price: per piece -Quantity: 4x Available -Weight: 0.2 kg

Condition: used, Screw-in heater, electric heater, electric heater, heating coil, electric tubular heater, heating element, air heater, rod heater, heating rod, heating cartridge, high-performance heating cartridge, heating element, heating register, finned tubular heater -Manufacturer: Siemens, heating element finned tubular heater Lsdpfx Afoqn Ap Rewshk -Type: Order no.: 2NW 3510 Instr. no.: J100 519 201 -Voltage: 220 V -Power: 1000 W -Immersion depth: 800 mm -Quantity: 2x heating element available -Price per piece -Total dimensions: Ø 122 x 910 mm -Weight: 6.8 kg/pc.