Used Heavy Duty Trailer for sale (17,596)

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 2,600 mm with foot section, 1,000 mm usable depth 12 cantilevers with 1,000 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Gjdpfx Agsmhh Dze Hjbk Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 2,600 mm - Load capacity per upright 1,800 kg - Foot section and cantilever arms with 1,000 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever racking: Screw system in hot-dip galvanized design Scope of delivery: Gjdpfxsfdkb Te Ag Hjbk 4 shelf uprights Height 4,160 mm with base section 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth, standard Longitudinal and diagonal braces for 4,000 mm shelf length (spacing 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Replacement parts can be reordered and extended at any time) - (*Offer available in larger quantities: approx. 90 stands in stock) Detailed description: - Sturdy steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screw-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Shelf length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification prior to delivery. The material is sensibly packed to enable easy unloading. For outdoor installation, the load-bearing capacity is reduced by the wind and snow load. The base must be concrete, level and suitable for dowels and be able to bear the loads. The customer must check and ensure that the ground conditions and load-bearing capacity as well as any official approvals that may be required. The shelf stands must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the employers' liability insurance association, it is recommended that the uprights on the uppermost storage level protrude at least 500 mm from the top edge of the uprights.

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 3,000 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) Gjdsmhh Anepfx Ag Hebk - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 3,000 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: as good as new (ex-display), Year of construction: 2024, Cantilever rack in painted version (RAL 7016 anthracite): Scope of delivery: 4 shelf uprights height 2.56 m with base section 1.0 m usable depth (1.2 m total depth) 12 cantilever arms with 1.0 m usable depth Longitudinal and diagonal braces for 4 m shelf length (spacing 1.3 m) Fastening material (screws, nuts and washers) (*No paint damage!) Net price on collection: € 1,490.00 plus VAT. Delivery possible for an additional charge Detailed description: - Sturdy steel construction made of IPE profiles (screw system) - Surface painted in RAL 7016 (anthracite) - Shelf height 2,560 mm - Load capacity per upright 1,800 kg - Foot section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screw-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Shelf length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Made in Germany - Short delivery time - On-site collection possible Gbedpfsguk A Hjx Ag Hok Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification prior to delivery. The material is sensibly packed to enable easy unloading. The substrate must be made of concrete, be level and suitable for dowels and be able to bear the acting loads. The customer is responsible for checking and ensuring the ground conditions and load-bearing capacity as well as any official approvals required. The shelf stands must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the employers' liability insurance association, it is recommended that the uprights on the uppermost storage level protrude at least 500 mm from the top edge of the uprights.

Condition: like new (used), Year of construction: 2025, Cantilever rack with roof supports: Hot-dip galvanized bolted system Scope of delivery: - 9 rack uprights, height 4,230 mm with base section, usable depth 1,200 mm - 27 cantilever arms, 1,200 mm usable depth, with guards - 9 roof supports with 1,500 mm cantilever, pre-drilled for on-site roof construction (*Excluding timber purlins and trapezoidal metal sheets for the roof structure) - Includes longitudinal and diagonal braces for 1,500 mm upright spacing - Incl. mounting hardware (excluding floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and extensions available to order at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles - All components hot-dip galvanized - Load capacity per upright: 2,700 kg plus additional roof, wind, and snow load (Maximum snow load 1.85 kN/m² and wind load zone 2) - Load capacity per cantilever arm: 900 kg - Including roof supports (Maximum snow load 1.85 kN/m² and wind load zone 2) - Cantilever arms height adjustable in 100 mm increments - Per upright: 3 bolted cantilever arms, depth 1,200 mm, with guards = 4 storage levels - Including longitudinal and diagonal braces with 1,500 mm upright spacing - Rack length: 12,100 mm Gedpfx Agjmhhy Nj Hobk - Including mounting hardware (without floor anchors) - With assembly instructions and C4 load labels according to DIN standard - Specialist telephone consultation - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight services with advance notice before delivery. The material is thoughtfully packaged to facilitate easy unloading. The substructure must be concrete, level, and suitable for dowel anchoring, and capable of bearing the applied loads. The floor condition and load-bearing capacity, as well as any required official permits, must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site. Anchoring to the wall is neither required nor recommended. According to Occupational Safety regulations, it is recommended that the uprights have at least 500 mm overhang above the top storage level.

Condition: like new (used), Year of construction: 2024, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 3,000 mm with base section 1,200 mm 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 50 stands in stock) Detailed description: Gsdpfxoguk Dke Ag Hobk - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 3,000 mm - Load capacity per stand 2,250 kg - Base section and cantilevers with 1,200 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 2,600 mm with base section 1,000 mm Gsdpfsguk Dvex Ag Hsbk 12 cantilevers with 1,000 mm depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per stand 1,800 kg - Base section and cantilevers with 1,000 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 4,160 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Longitudinal and diagonal struts for 4,000 mm shelf length (distance 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface hot-dip galvanized - Shelf height 4,160 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm Usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. Godpfx Aemhh Dtjg Hsbk The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and suitable for dowels and must be able to absorb the loads. The customer must check and ensure that the floor conditions and load-bearing capacity, as well as any official permits that may be required, are obtained. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: excellent (used), This system If designed to continuously cool veg products in glycol chilled water what was bought new by our customer to chill sachets of hot sauces and soups at 2500 KG per hour. Available separately or as a line with infeed and outfeed conveyors. Gedoh Uyg Njpfx Ag Hebk

Condition: new, mileage: 500 km, power: 368 kW (500.34 HP), fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2025, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, soot filter, Volvo FH 500 8x4 Crane F710 RA2.27 with Jib and Winch – Tractor Unit, Immediately Available Removable drop-side platform body 4400x2500x600 mm + extension Fifth wheel coupling Volvo: New model * FH sleeper cab * Wheelbase: 4600 mm * Emissions: Euro 6 Step E, with SCR, particulate filter, and EGR * Diesel engine 12.8 l, 510 hp/375 kW, 2,550 Nm * Volvo Engine Brake+ (VEB+), braking power: 510 hp/375 kW (D13K) * Compliant with ADR braking regulations * I-Shift AT2612F, automated 12-speed transmission (direct drive), max. input torque: 2,652 Nm * Rear axle RSS1370A, single reduction, 13 t axle load, GCW 70 t * AA tires 315/70R22.5 * Drive axle ratio 2.85:1 * Diesel fuel tank * Driver comfort package * Air conditioning with automatic climate control and sun sensor * Info and media package with navigation * Radio: AM/FM * 3x USB ports * 8 speakers * High instrument cluster: 12'' digital driver display with 4 views * Second driver’s info display, 9'' b-display * Navigation system: TOMTOM * AGM batteries, 2 x 210 Ah * Battery status display (voltage, amperage, and condition with warning function) * Main switch on chassis * 330 L aluminum fuel tank on right, D-shape, 710 mm high, 830 mm long * Fuel tank, standard ground clearance * AdBlue tank on left, usable capacity 64 L * Lockable fuel cap * Splash protection on tank filler neck * Exhaust outlet to rear * 2 foldable wheel chocks, transport mounted * Marker lights rear and side * Trailer crossmember with D-value = 190 kN for G-150/G-260 mounting pattern * Trailer crossmember to frame end: 85 mm * Rear frame length: 4395 mm, measured from drive axle/first drive axle * Rockinger 400 G-150 trailer coupling (observe D-value/max. trailer weight!) * Electrical trailer/semi-trailer connection, 15-pin * Trailer/semi-trailer Duomatic connection * Trailer connections in the center * Stationary trailer brake (active up to 7 km/h) * Rear underrun protection, aluminum, fixed, thin * 4x VA tires 385/55R22.5 Continental, Hybrid HS3+, rolling resistance class: C, steering axle * 4x AA tires 315/70R22.5 Continental, Hybrid HD3, rolling resistance class: C, drive axle * 2x NLA tires 385/55R22.5 Continental, Hybrid HS3+, rolling resistance class: C, trailing axle * Electric venting pump * Transmission/I-Shift control via unit on driver’s seat * I-Shift driving modes: Standard, Performance, and Economy * Auto-return to Economy mode * No manual intervention in automatic mode, no kickdown * Cruise control * Transmission oil cooler, basic, water/oil * 2-cylinder air compressor, 1100 l/min, for vehicles/combinations with increased air consumption * Front air intake with standard air filter * Alternator: 150A/4200W * External noise level per ECE R51.03 Phase 2, with low noise certificate and L sign * Closed crankcase ventilation * Dual fuel filters on engine, large size for poor fuel quality (e.g., Eastern Europe) * Fuel filter with water separator * PTO (medium speed PTR-DM), gearbox side, connection: 1x rear DIN for pump * PTO on gearbox, max. power: 600 Nm * Dynamic trim: fabric seats, yl (blue/dark blue), interior trim in grey fabric * Comfort driver’s seat: air-suspended, heated, seatbelt integrated * Standard air-suspended passenger seat * Lower bunk, folding, 2000x815/740/660 mm (center, top, bottom) with safety net Gbodpfoywfwvex Ag Hsk * Cab parking heater, 2 kW * Storage under bunk * 33 L fridge with freezer compartment under bunk * S

Condition: new, mileage: 500 km, power: 368 kW (500.34 HP), fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2026, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, soot filter, Volvo FH 500 8x4 Crane F705 R.2.7 L436 V20 NEW MODEL Removable flatbed with drop sides 4400x2500x600 mm + extension Fifth Wheel Coupling Volvo: * New Model * FH sleeper cab * Wheelbase: 4600 mm * Emission standard: Euro 6 Step E with SCR, particulate filter, and EGR * Diesel engine 12.8 l, 510 hp / 375 kW, 2,550 Nm * Volvo Engine Brake+ (VEB+), braking power 510 hp / 375 kW (D13K) * Complies with ADR brake regulations * I-Shift AT2612F, automated 12-speed gearbox (direct drive), max. input torque: 2,652 Nm * Rear axle RSS1370A, single reduction, 13 t axle load, GCW 70 t * AA tyres 315/70R22.5 * Drive axle ratio 2.85 : 1 * Diesel fuel tank * Driver comfort package * Air conditioning with automatic temperature regulation and sun sensor * Info and media package with navigation * Radio: AM/FM * 3x USB ports * 8 speakers * High-level instruments: 12'' digital driver's info display with 4 views * Second driver info display, 9'' display * Navigation system "TOMTO" * AGM batteries, 2 x 210 Ah * Battery status display (voltage, amperage and status with warning function) * Main switch on chassis * 330 L aluminium tank right, D-form, 710 mm high, 830 mm long * Standard ground clearance fuel tank * AdBlue tank left, usable capacity 64 litres * Lockable tank cap * Spill guard tank filling nozzle * Exhaust at rear * 2 folding wheel chocks, transport mounted * Rear and side marker lights * Trailer cross member with D-value = 190 kN for G-150/G-260 hole pattern * Trailer cross member to frame end: 85 mm * Rear frame length: 4,395 mm, measured from drive axle/first drive axle * Trailer coupling Rockinger 400 G-150 (observe D-value/max trailer load!) * Electrical connection for semi-trailer/trailer, 15-pin * Trailer/semi-trailer Duomatic connection * Central trailer connections * Stationary trailer brake (active up to 7 km/h) * Rear underrun protection, aluminium, fixed, thin * 4x VA tyres 385/55R22.5 Continental, Hybrid HS3+, rolling resistance class: C, steering axle * 4x AA tyres 315/70R22.5 Continental, Hybrid HD3, rolling resistance class: C, drive axle * 2x NLA tyres 385/55R22.5 Continental, Hybrid HS3+, rolling resistance class: C, tag axle * Electric venting pump * Gearbox/I-Shift control via driver seat console * I-Shift driving modes: Standard, Performance, and Economy * Automatic return to Economy mode * No manual override in automatic mode, no kickdown * Cruise control * Gearbox oil cooler, basic, water/oil * Two-cylinder air compressor, 1,100 l/min, for vehicles/combinations with high air demand * Forward air intake with standard air filter * Alternator 150A/4200W * External noise as per ECE R51.03 Phase 2, with low noise certificate and L-plate * Closed crankcase ventilation * Dual fuel filter system at engine, large for poor fuel quality (e.g. Eastern Europe) * Fuel filter with water separator * PTO (medium speed PTR-DM), gearbox side, connection: 1 DIN rear for pump * PTO on gearbox, max output 600 Nm * Dynamic equipment: seats in fabric (blue/dark blue) with grey fabric interior * Comfort driver’s seat: air-suspended, heated, seat-integrated belt * Standard co-driver seat, air-suspended Gbsdpfx Asywfwieg Hjk * Lower bunk, foldable, 2000x815/740/660 mm (middle, top, bottom) with safety net * Cab parking heater, 2 kW * Storage under the bunk * Refrigerator with 33 L freezer compartment under the bunk * Vanity/shaving mirror * Cab...

Condition: excellent (used), mileage: 377,255 km, power: 471 kW (640.38 HP), first registration: 04/2016, fuel type: diesel, wheelbase: 4,100 mm, fuel: diesel, fuel tank capacity: 1,000 l, brakes: retarder, color: green, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, total width: 2,550 mm, total height: 3,990 mm, Year of construction: 2016, Equipment: AdBlue, retarder, = Additional Options and Equipment = - Intarder - Tipping hydraulics - PTO (Power Take Off) = Further Information = Transmission: WSK 500 TONS, automatic Number of cylinders: 6 Engine displacement: 15,256 cc Unladen weight: 14,350 kg Gsdpfxsybbwfe Ag Hjbk APK (Technical Inspection): New TÜV upon delivery Technical condition: very good Optical condition: very good MAN TGX 41.640 8X4/4 BBS HEAVY DUTY TRACTOR UNIT 500 TON PUSH PULL EURO 6 L PACKAGE TRACTION 8X4 BBS LEAF SUSPENSION WHEELBASE 410 CM SLIDING FIFTH WHEEL FOR SEMI-TRAILER TECHNICAL PERMISSIBLE MAX. GROSS WEIGHT 45,000 KG DIFFERENTIAL LOCKS PUSH AND PULL COUPLINGS ON FRONT AND REAR OF TRACTOR UNIT PULLING AND PUSHING CAPACITY 500,000 KG ADDITIONAL HYDRAULIC AND AIR VALVES LARGE COOLING PACKAGE BEHIND THE CAB WSK 440 TORQUE CONVERTER TWISTLOCKS FOR BALLAST BOX THE TRACTOR UNIT IS WORKSHOP-INSPECTED AND READY FOR USE

Condition: like new (used), Year of construction: 2019, functionality: fully functional, load capacity per storage section: 2,200 kg, support length: 2,700 mm, frame width: 1,100 mm, 257 linear meters of pallet racking by manufacturer Tegometall, model CI70/80. Excellent condition, manufactured in 2019. Inspected annually and serviced as needed. The offer includes: 93 uprights 6m x 110cm (height x depth) and 552 beams 270cm, as well as locking pins. This results in up to 1,104 Euro pallet slots and approximately 257 linear meters of racking. Bay load 8.5t and shelf load 2,200kg. Gbodpfx Agsyw N Sks Hek Partial quantities possible – just ask. Price is net plus VAT. The racking is already professionally dismantled and in stock, so it is immediately available. Europe-wide delivery by freight forwarding available for an extra charge.

Condition: good (used), functionality: fully functional, Year of construction: 2019, operating hours: 4,515 h, load capacity: 18,000 kg, lifting height: 4,500 mm, load center: 1,200 mm, fuel type: diesel, mast type: triplex, power: 168 kW (228.42 HP), motor manufacturer: Cummins QSB6.7, fork carriage width: 2,600 mm, fork length: 2,400 mm, fork width: 260 mm, fork thickness: 110 mm, tire condition: 70 %, front tire size: 14.00-24, rear tire size: 14.00-24, overall weight: 33,540 kg, color: blue, Equipment: CE marking, air conditioning, cabin, centralized greasing system, pallet forks, sideshift, === KEY SPECIFICATIONS === Year of manufacture: 2019 Operating hours: 4,515 h Max. lifting capacity: 18,000 kg Max. lifting height: 4.5 m Mast type: Triplex Fork length: approx. 2,400 mm Sideshift fork carriage: Yes Drive: Diesel Transmission: Automatic (powershift) Cabin: Enclosed Heated cabin: Yes Tyres: Pneumatic Stabilisers: No Engine manufacturer: Cummins QSB6.7 Emission class: Stage IV / V Weight: 33,540 kg CE certification: Yes === HIGHLIGHTS === Carefully selected from reliable sources with verifiable history CE certification and full documentation included Ready for immediate transport and operation Extensive technical documentation available Heavy-duty 18-ton diesel forklift Triplex mast with free lift Sideshift fork carriage Comfort operator cabin Hydrodynamic powershift transmission Oil-cooled wet disc brakes Hydraulic servo steering Continental pneumatic tyres Gjdpsyid Iyofx Ag Hsbk Rear view camera system Ideal for heavy industrial handling, steel, concrete and port logistics. === CONDITION === Excellent working condition – fully inspected, serviced and tested by certified professionals. Inspection available upon request. Tyres in good condition (approx. 70%). Machine ready for immediate work. === LOCATION & PRICE === Located in Sittard, the Netherlands. Worldwide delivery available. Price on request (EXW / excl. VAT). Reliable machines from first owner with full service history and professional technical support. Benefit from one of the largest European stocks of new and used machines. All machines are fully inspected, CE certified and ready for immediate use. Spare parts and professional assistance available upon request. === DELIVERY === Crane loading available on request for smooth transport during shipment. Flexible shipping options tailored to your destination and logistical preferences. All transports are professionally handled by the Collé Rental & Sales logistics team.

Condition: excellent (used), mileage: 260,321 km, power: 471 kW (640.38 HP), first registration: 11/2018, fuel type: diesel, axle configuration: 8x4, wheelbase: 4,100 mm, fuel: diesel, fuel tank capacity: 1,000 l, brakes: retarder, color: other, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, total length: 8,120 mm, total width: 2,550 mm, total height: 3,950 mm, Year of construction: 2018, Equipment: ABS, AdBlue, electric window regulation, parking heater, retarder, = Additional Options and Equipment = - Low noise - Speed limiter - Intarder - Media system - Warning beacon - Sleeper cab - Sun visor - Auxiliary heater - Power take-off (PTO) = Additional Information = General Information Color: Cream Technical Information Number of cylinders: 6 Engine displacement: 15,256 cc Transmission: WSK 500 TONS, automatic Front axle 1: Steered Front axle 2: Steered Weights Unladen weight: 14,920 kg Payload: 26,080 kg Gbjdpfxeyttv De Ag Hjk Gross vehicle weight: 41,000 kg Condition Technical condition: Very good Visual condition: Very good MAN TGX 41.640 8X4/4 BBS HEAVY DUTY TRACTOR 500 TON PUSH PULL EURO 6 L PACKAGE 8X4 BBS TRACTION LEAF SPRING SUSPENSION WHEELBASE 410 CM SLIDING FIFTH WHEEL FOR SEMI-TRAILER TECHNICALLY PERMISSIBLE MAX. TOTAL WEIGHT 45,000 KG DIFFERENTIAL LOCKING PUSH AND PULL COUPLINGS AT THE FRONT AND REAR OF THE TRACTOR PULLING AND PUSHING FORCE 500,000 KG ADDITIONAL HYDRAULIC AND AIR VALVES LARGE COOLER PACKAGE BEHIND THE CAB WSK 440 TORQUE CONVERTER TWISTLOCKS FOR BALLAST BOX THE TRACTOR UNIT IS WORKSHOP-TESTED AND READY FOR OPERATION

Condition: excellent (used), mileage: 206,314 km, power: 471 kW (640.38 HP), first registration: 04/2018, fuel type: diesel, axle configuration: 8x4, wheelbase: 4,100 mm, fuel: diesel, fuel tank capacity: 1,000 l, brakes: retarder, color: green, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, total length: 8,200 mm, total width: 2,550 mm, total height: 3,950 mm, Year of construction: 2018, Equipment: AdBlue, retarder, = Additional Options and Accessories = - Intarder - Tipping hydraulics - PTO (Power Take-Off) = Further Information = Technical Information Number of cylinders: 4 Engine displacement: 15,256 cc Transmission: WSK 500 TONS, automatic Gjdpfx Ajyttvdeg Hebk Front axle 1: Steered Front axle 2: Steered Weights Unladen weight: 14,175 kg Payload: 26,825 kg Gross vehicle weight: 41,000 kg Condition Technical condition: very good Optical condition: very good MAN TGX 41.640 8X4/4 BBS HEAVY DUTY TRACTOR UNIT 500 TON PUSH PULL EURO 6 L PACKAGE 8X4 BBS TRACTION LEAF SUSPENSION WHEELBASE 410 CM SLIDING FIFTH WHEEL FOR SEMI-TRAILER TECHNICALLY PERMITTED MAX. GROSS WEIGHT 45,000 KG DIFF-LOCKING PUSH AND PULL COUPLINGS FRONT AND REAR OF TRACTOR UNIT PULLING AND PUSHING CAPACITY 500,000 KG ADDITIONAL HYDRAULIC VALVES AND AIR VALVES LARGE COOLER PACKAGE BEHIND THE CAB WSK 440 TORQUE CONVERTER TWISTLOCKS FOR BALLAST BOX TRACTOR UNIT IS WORKSHOP INSPECTED AND READY FOR OPERATION

Condition: excellent (used), mileage: 243,700 km, power: 471 kW (640.38 HP), first registration: 03/2020, fuel type: diesel, axle configuration: 8x4, wheelbase: 4,100 mm, fuel: diesel, fuel tank capacity: 1,000 l, brakes: retarder, color: green, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, total length: 8,150 mm, total width: 2,550 mm, total height: 3,950 mm, Year of construction: 2020, Equipment: AdBlue, retarder, = Further options and accessories = - Intarder - PTO (Power Take-Off) = Further information = Technical details Number of cylinders: 6 Engine capacity: 15,256 cc Transmission: WSK 500 TONS, automatic Front axle 1: steerable Front axle 2: steerable Weights Unladen weight: 14,350 kg Payload: 26,650 kg Gross vehicle weight (GVW): 41,000 kg Condition Technical condition: very good Visual condition: very good MAN TGX 41.640 8X4/4 BBS HEAVY DUTY TRACTOR UNIT 500 TON PUSH PULL EURO 6 L PACKAGE 8X4 BBS TRACTION AIR SUSPENSION WHEELBASE 410 CM ADJUSTABLE FIFTH WHEEL FOR SEMI-TRAILERS TECHNICALLY APPROVED MAX. GROSS WEIGHT 45,000 KG DIFF-LOCK PUSH AND PULL COUPLINGS AT FRONT AND REAR OF THE TRACTOR UNIT PULLING AND PUSHING FORCE 500,000 KG Godpfx Ageyttu To Hsbk ADDITIONAL HYDRAULIC AND AIR VALVES LARGE COOLER PACKAGE BEHIND THE CABIN WSK 440 TORQUE CONVERTER TWISTLOCKS FOR BALLAST BOX TRACTOR UNIT HAS BEEN WORKSHOP-INSPECTED AND IS READY FOR OPERATION

Condition: good (used), Tandem cargo bike, load rollers, heavy-duty rollers, heavy-duty wheel, tires, solid rubber tires -Heavy-duty wheel: Double solid rubber tire -Tire type: 415/75-305 -Receipt: Ø 90 x 58 mm -Bolt circle: Ø 220 mm -Dimensions: Ø 415 x 215 mm Quantity: 1 piece available Gbedpfx Ajlyvcxjg Hsk -Weight: 49 kg

Condition: used, machine/vehicle number: XL9T0N30064415030, axle configuration: 3 axles, first registration: 01/2007, total length: 13,800 mm, total width: 2,550 mm, wheelbase: 9,110 mm, color: other, Year of construction: 2007, Equipment: ABS, = Additional options and accessories = - Air Suspension - BPW Axles Gbedeyr Nk Uepfx Ag Hjk - Drum brakes = More information = Rear axle 1: Max. axle load: 9000 kg Rear axle 2: Max. axle load: 9000 kg Rear axle 3: Max. axle load: 9000 kg Empty weight: 6.380 kg Carrying capacity: 38.620 kg GVW: 45.000 kg APK (MOT): tested until 06/2026 Registration number: OJ-26-PL

Condition: good (used), Platform trolley, transport trolley, heavy-duty trolley, table trolley, assembly trolley, industrial trailer, container dolly, heavy-duty trailer -Manufacturer: MAFI, heavy-duty transport trolley with 1-axle turntable steering and parking brake -Platform: 4000/2500/H895 mm -Load capacity: 22 t Gbodsyl Urqjpfx Ag Hjk -Tires: Solid rubber dual tires 540x200x410 see photos -Overall dimensions: 5750/2500/H895 mm -Transport dimensions: 4000/2500/H895 mm -Weight: 2720 kg

Condition: as good as new (ex-display), Brand new, unused. Double door twin dolav washer, will also wash tote bins. Still in its protective wrapping. Rare opportunity! Gjdpfevvw Niex Ag Hobk

Condition: used, Column Drilling Machine ALZMETALL Type AB 3 ESV Machine No. 15967 Year of manufacture 1977 Drilling capacity: 32 mm Spindle taper: MT 3 – short quill Distance spindle nose – table: 545 mm (short quill) Distance spindle adapter – table: 395 mm (MT adapter) Throat: 290 mm Quill stroke: 160 mm Table size: Ø 545 mm Gbedpfx Ajharwvsg Hek Column diameter: 220 mm Spindle speed: 55 – 1450 rpm, stepless Motor power: 1 / 1.6 kW Supply voltage: 380 Volt, 50 Hz - Spindle speed via 2 gearbox stages, 2 motor speeds and stepless through variable-speed drive - Intermediate gear stage for high torque at low speeds - MT adapter from MT3 to MT4 - Automatic feed 0.1 – 0.2 – 0.3 mm/rev - Swiveling drill table - Table height adjustment via hand crank - Heavy machine base with machined workpiece support surface (not original Alzmetall) - Work area lighting Space required (L x W x H): 1150 x 650 x 2000 mm Weight: 850 kg Good condition

Condition: used, total length: 39,900 mm, total height: 3,000 mm, shelf height: 3,000 mm, support length: 2,700 mm, Included in this package: 15 uprights, each 3,000mm x 1,100mm (blue) 56 beams, each 2,700mm (yellow) 112 safety pins This results in a racking row with 14 bays, each with 2 levels plus floor pallet position = total of 126 pallet spaces (1,000kg per pallet) Approx. 800 uprights and 4,500 beams are available for this system. Please contact us for details. Manufacturer: Jungheinrich Type: MPB Condition: used, good condition Height: 3,000 mm Length: approx. 39.90 meters Rack depth: 1,100 mm Bracing: bolted Beam length: 2,700 mm Compartment load: 3,000 kg Bay load: 6,000 kg Pallet spaces: 126 Accessories such as: Floor fixings Connectors Load notices Impact protectors Guard rails Grating panels Rear mesh panels Support bars Safety barriers ...and much more. Simply ask us for your requirements! Gbjdpfx Ajyvr U Eeg Hek "Benefit from over 20 years of industry experience – we provide expert and personal advice as your specialist dealer for new and used racking systems." Sales & Delivery Conditions (B2B) - Prices & Logistics: All prices are net ex location. Express delivery with our own fleet possible by arrangement. - Offer status: All offers are non-binding. Subject to prior sale. - Retention of title: Goods remain our unrestricted property until full payment is received (no processing or disposal before settlement). - Warranty: Exclusive sales to businesses (§14 German Civil Code). No liability for material defects with used and grade II goods. Manufacturer warranties apply to new goods.

Condition: used, Included in this package: 1 x upright 11,750 mm x 1,100 mm (galvanized) (The uprights can be cut to any height—just ask us) Available from Berlin or Neuwied For this system, 400 uprights and 2,800 beams are available. Please contact us for more information. Manufacturer: Meta Jungheinrich Type S Condition: used, good condition Gbodpsyvr Swsfx Ag Hok Height: 11,750 mm Rack depth: 1,100 mm Bracing: bolted Beam length: 2,700 mm Bay load: 11,750 kg with a buckling length of 235 cm Accessories such as: - Floor fixings - Connectors - Load warning signs - Impact protection guards - Safety barriers - Wire mesh shelves - Back mesh panels - Depth bars - Boundary railings And much more... Just ask! "Benefit from over 20 years of industry experience – we offer you expert and personal advice as your specialist dealer for new and used racking systems." Sales & Delivery Terms (B2B) - Prices & Logistics: All prices are net ex location. Express delivery using our own fleet possible by individual arrangement. - Offer status: All offers are subject to change without notice. Intermediate sale expressly reserved. - Retention of title: Goods remain our unrestricted property until full payment has been received (prohibition of disposal and processing). - Warranty: Exclusive sale to commercial customers (§ 14 German Civil Code). For used and surplus stock, liability for material defects is excluded. For new goods, manufacturer warranties apply.

Condition: used, Included in this package: 1 x pallet racking beam 1 x crossbeam, 2,700 mm (orange) 2 x locking pins Available from Berlin or Neuwied There are 400 frames and 3,000 beams available for this system. Feel free to contact us. Gsdpfx Ajyvr Hnsg Hobk Manufacturer: Meta Jungheinrich TYP S Condition: used, good condition, some with labels Beam length: 2,700 mm Bay load: 3,000 kg Accessories such as: - Floor fixings - Connectors - Load capacity warning notices - Impact guards - Guard rails - Wire mesh decks - Rear mesh panels - Depth support bars - Safety barriers and much more... Just ask us! "Benefit from over 20 years of industry experience – we provide you with expert and personal advice as your experienced specialist supplier for new and used racking systems." Sales & Delivery Conditions (B2B) - Prices & Logistics: All prices are net ex location. Express delivery via our own fleet available upon request. - Offer status: All offers are non-binding. Subject to prior sale. - Retention of title: Goods remain our sole property until full payment has been received (prohibition of disposal and processing). - Warranty: Sale exclusively to business customers (§ 14 German Civil Code). For used and second-choice goods, liability for material defects is excluded. For new goods, the respective manufacturer's warranties apply.