Used Insolvency for sale (65)

Condition: used, functionality: fully functional, Year of construction: 2006, operating hours: 15,700 h, load capacity: 9,000 kg, fuel type: diesel, mast type: duplex, Equipment: cabin, pallet forks, sideshift, From the insolvency of a company, we are offering the following used item for sale via auction: Heavy-duty forklift Manufacturer: KALMAR Type: DC 90-6 Load capacity: 9,000 kg Year of manufacture: 2006 15,700 km Equipped with side shifter and automatic fork adjustment Price applies for collection. The item is located in 23554 Lübeck and must be collected by the buyer from that location. Dismantling, loading, and transport must be organized by the buyer. Dcedpfszbt N Tjx Al Neh If you wish to purchase this item, please enter your complete details on our website. You will then immediately receive our decision regarding your bid. This offer applies exclusively to the described item. Any other items that may be shown here are potentially part of a different offer. Errors and omissions excepted. Inventory number: 2980-75

Year of construction: 2018, condition: excellent (used), From insolvency: Dodpfxek T Av Rj Al Nech Model RRI 8460 serial no.18/70139708 with TENSION DEVICE SPITZNAS WITH AUTOMATIC FEED mODEL 512089940 in original case

Year of construction: 2005, condition: good (used), From insolvency: Spitznas model 512120010 year of manufacture unknown with TENSION DEVICE SPITZNAS WITH AUTOMATIC FEED mODEL 512089940 Dcedpjlczd Hefx Al Noh in original case

Condition: used, functionality: unexamined, Year of construction: 2014, overall weight: 1,500 kg, total height: 4,500 mm, total length: 10,000 mm, total width: 5,000 mm, load capacity: 350 kg, FEINAUER - FRAMATECH LH PP 350 S 70 KBK system with suction lifter, used Manufacturer: FRAMATECH and FEINAUER Consisting of: rail with a length of approximately 10 m, traverse with FRAMATECH LH PP 350 S 70 suction lifter, year of manufacture 2014, Dcsdpfxjzakwxo Al Njh serial number 20145040/4, maximum load capacity 350 kg, swiveling, 4 suction plates, total travel range approximately 10000 x 5000 mm Year of manufacture 2014 The machine was acquired by us in 2024 from Surplex during the insolvency proceedings of Lechner GmbH in Rothenburg. However, due to company restructuring, it was never assembled. The machine is currently disassembled and stored in our warehouse. Sold as is, without any further technical inspection. If you have any questions or require further information, please do not hesitate to contact us via message or phone.

Condition: defective spare-parts repository (used), functionality: limited functionality, Dear Sir or Madam, We hereby offer you the following device for sale: Keyence XM-1200 coordinate measuring machine. The device is defective and currently not operational. Dcsdpfxjyrcx Sj Al Noh The machine is sold with the equipment documented in the photos and specified in the advertisement text. Location: 40764 Langenfeld ATTENTION! The device originates from an insolvency. We are auctioning it off to the highest bidder on behalf of the creditor/bank. This is a closed auction. We do not provide any information about the current highest bid. Your bid becomes binding upon receipt by email. Please send us your binding bid by 10 a.m. on 13 May 2026. After the auction ends, you will be informed of the auction result within 72 hours.

Condition: used, functionality: unexamined, Dear Sir or Madam, We hereby offer you the following device for sale: Keyence WM-C3000 coordinate measuring machine. The machine is sold with the equipment documented in the photos and specified in the advertisement text. Dsdpfeyrcx Esx Al Noch Location: 40764 Langenfeld ATTENTION! The device originates from an insolvency. We are auctioning it off to the highest bidder on behalf of the creditor/bank. This is a closed auction. We do not provide any information about the current highest bid. Your bid becomes binding upon receipt by email. Please send us your binding bid by 10 a.m. on 13 May 2026. After the auction ends, you will be informed of the auction result within 72 hours.

Condition: used, Dear Sir or Madam, We are pleased to offer the following equipment for sale: Keyence VL-500 measuring system. The machine is sold with the equipment shown in the photos and listed in the advertisement text. Location: 40764 Langenfeld PLEASE NOTE! The equipment originates from an insolvency. We are auctioning this off to the highest bidder on behalf of the creditor/bank. This is a closed auction. We do not provide any information regarding the current highest bid. Your bid becomes binding upon receipt by email. Please submit your binding bid by 10:00 am on 13 May 2026. Once the auction has ended, you will be informed of the outcome within 72 hours. Dsdpfx Asy Iaa Tjl Nech

Condition: used, functionality: unexamined, Dear Sir or Madam, We are pleased to offer the following machine for sale: Keyence XM-5000 coordinate measuring machine. The machine is sold with the equipment shown in the photos and listed in the advertisement text. Dcodey Iaayspfx Al Noh Location: 40764 Langenfeld PLEASE NOTE! The equipment originates from an insolvency. We are auctioning this off to the highest bidder on behalf of the creditor/bank. This is a closed auction. We do not provide any information regarding the current highest bid. Your bid becomes binding upon receipt by email. Please submit your binding bid by 10:00 am on 13 May 2026. Once the auction has ended, you will be informed of the outcome within 72 hours.

Condition: not inspected (used), functionality: unexamined, We are offering this untested TOS Trenčín SUI 50 CNC centre lathe, year of manufacture unknown. Manufacturer: TOS Trenčín Model: SUI 50 CNC Condition: untested Category ID: 1519 Dcsdpfx Aoy Nml Ejl Neh Type ID: 2086 Machine type: Centre lathe (lead-screw/feed-screw lathe) The machine powers up and the display lights up without any error messages. The chuck can be engaged. Other than the emergency stop button on the machine (see photos), no defects are visible. Unfortunately, I have no experience with this machine and therefore cannot operate it. The machine was still in operation until early 2025. It comes from an insolvency auction and is now for sale. The tools currently installed in the machine will remain in it. A complete operating manual and circuit diagrams are available. The machine is still connected and can be inspected and tested on site. Transportation should ideally be arranged by the customer. Loading by overhead crane is possible. Securing the machine is the buyer’s responsibility. If you have any further questions or require more information, please feel free to send us a message or call us.

Year of construction: 2000, condition: good (used), Offered from an insolvency is a pipe end processing machine Manufacturer unknown Model ?? Year of manufacture ?? Machine no.?? Technical data: Dcjdofynfwspfx Al Noh Compressed air driven Tube diameter up to 401mm possible Accessories as shown

Year of construction: 2004, condition: excellent (used), Offered from an insolvency is a DC TIG welding machine Manufacturer Migatronic Model Pilot 2400 Year of manufacture 2004 Machine No. 04050694 Technical data: 380 volts Welding range 5-240Amps Welding power: Dcjdsfthy Rspfx Al Njh 240Amps at 35% ED 170Amps at 100% ED 2/4 beat Pulse function HF ignition additional water cooling KG 2 No.25730509 220 Volt 8meter burner package with ground cable ---- without pressure reducer-- Dimensions in mm approx. 510x370x220

Condition: like new (used), Year of construction: 2010, operating hours: 65,850 h, functionality: fully functional, machine/vehicle number: 61013689, clamping force: 2,500 kN, screw diameter: 50 mm, clearance between the columns: 630 mm, displacement volume: 432 cm³, injection pressure: 2,304 bar, injection weight: 393 g, Equipment: documentation/manual, As a dealer in injection moulding machines, we are offering the following well-maintained used injection moulding machine We also, of course, purchase well-maintained injection moulding machines manufactured from 2010 onwards We have been wholesalers of used injection moulding machines for over 25 years In light of recent developments – tax information and benefits for used machinery From 1 July 2025, used machinery will also be eligible for a special annual depreciation allowance of 30% for tax purposes. In addition to the lower price compared to a new machine, you can claim the same depreciation amounts as for a new machine Keyword: Growth booster (Section 7(2) EStG-E) Currently in stock and tested at our Hanover warehouse Manufacturer: Krauss Maffei Model: KM 250 1000 CX Control unit: MC5 Year of manufacture: 2010 Operating hours: 65,850 h Machine number: 61013689 Processed material: PE and PP – thermoplastics Extras - 2 x core pull (movable WAP, fixed WAP) - Pneumatic valve 1 on FWAP - Pressure accumulator for increased injection capacity - Fast SK removal CX Midrange - Ejection of cooled nozzle plug - Start handling during mould movement - Start-up sequence - Cycle time analysis - External USB keyboard - Graphical analysis – maintenance instructions - Electronic coding of injection unit - Pneumatic valve on BWAP blow-out - 12 temperature control points - Potential-free contact BDE - Process monitoring - Cycle storage - Trend graph - Target/Actual graph - PV control - Active back pressure control - From first owner - Origin: Germany Dcedpexqhuujfx Al Noh Regular maintenance carried out by the manufacturer and previous owner Clamping unit Clamping force: 2500 kN / 250 tonnes. Column spacing: 630 x 630 mm Platen dimensions: 995 x 1050 mm Opening width: 820 mm Mould height: 330 mm min. Opening width max. 1150 mm Ejector stroke: 200 mm Ejector force: 57 kN max/26.3 kg Injection unit Screw diameter: 50 mm Injection volume: 432 cc Shot weight: 393 g/PS Injection pressure: 2304 bar Electrical Pump: 45 kW Heating: 5 zones, 18.7 kW Weight: 13,900 kg. Dimensions: 5.7 x 2.3 x 2.3 m. Complete documentation, manual and software Available immediately from our warehouse in Hanover, Germany, or free delivery subject to reimbursement of freight costs The machine is offered with a functional test certificate The machine is our sole property The machine in question is available immediately from our warehouse in Hanover, is offered in a functionally tested condition and can be viewed whilst powered up. Information about the machines we offer and our company - We only sell machines purchased from current production from our warehouse in Hanover - All machines on offer are inspected and tested prior to dismantling - We do NOT sell goods from insolvency estates - We are NOT a broker dealing in third-party property. - All machines on offer come from successful companies for whom maintenance and upkeep are a matter of course - All machines on offer can be viewed at our warehouse

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 203129, clamping force: 400 kN, screw diameter: 18 mm, displacement volume: 23 cm³, Here we offer, as a dealer specializing in injection moulding machines, the following well-maintained used injection moulding machine: Of course, we also purchase well-maintained injection moulding machines manufactured from 2010 onwards. We have been a wholesale supplier of injection moulding machines for over 25 years. Manufacturer: Arburg Model: 270C 400-70 Control unit: Selogica Year of manufacture: 2007 Operating hours: 89,470 h Screw and cylinder replaced Machine number: 203129 Dodpjx Rvcisfx Al Njch Extras: - Robot interface - Highly wear-resistant screw - CF drive - Complete documentation and software (on CF card) - Diverter valve The machine has retrofitted interfaces for: - Mold temperature - Heating channel - Coloration/dosing Control via Siemens Logo PLC Language: German - From first owner - Origin: Germany Regular maintenance by the manufacturer and previous owner Clamping unit: Clamping force: 400 kN / 40 t Tie bar distance: 270 x 270 mm Mounting platens: 446 x 446 mm Opening stroke: 350 mm Mold height: min. 200 mm Max. daylight between platens: 550 mm Ejector stroke: 125 mm Ejector force: max. 30 kN Injection unit: Screw diameter: 18 mm Injection volume: 23 ccm Shot weight: 21 g Injection pressure: 2,500 bar Electrical equipment: Pump: 11 kW Heater: 4 zones, 4 kW Total installed power: 15 kW Pre-fuse: 50A Weight: 2,150 kg Warranty: Warranty valid until first commissioning Loading/Shipping: Free loading onto buyer’s truck or free delivery within Germany against reimbursement of freight costs Available from our warehouse in Hannover, Germany Company and machine information: - We only sell machines purchased from active production for our own inventory, from our warehouse in Hanover - All offered machines are checked and tested before dismantling - We do NOT sell insolvency assets – we are NOT brokers selling third-party property. - All machines offered come from successful companies for whom servicing and maintenance are a matter of course - All machines offered can be inspected at our warehouse

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, number of injections: 2, Here we offer, as a dealer in injection moulding machines, the following well-maintained used injection moulding machine: Of course, we also purchase well-maintained injection moulding machines manufactured from 2010 onwards. We have been a wholesaler of injection moulding machines for over 25 years. Manufacturer: Arburg Dedpfx Aljyzumze Noch Model: 520S 1600 290/70 – 2-component machine Year of manufacture: 2009, from first German owner - Total cycles: 12.3 million - Manual operation: 86,565 hours - Automatic operation: 78,099 hours Injection units (2K) Injection unit 1 – horizontal - 290 - Screw diameter: 25 mm - Shot volume: 71 cm³ Injection unit 2 – vertical - 70 - Screw diameter: 18 mm - Shot volume: 21 cm³ Clamping unit Mounting platens: 695 x 695 mm - Maximum platen distance: 925 mm - Opening stroke: 675 mm - Minimum mould height: 250 mm - Electric index rotation: present Extras Hot runner / additional axes - 12-zone hot runner integrated - 3x core pulls - 2x blow-out functions → incl. actuation for needle shut-off - Various customer-specific inputs and outputs Interfaces / Communication - ALS - Connection for temperature control units - Connection for dryers Handling / Multilift H (6 kg) - 2x vacuum circuits - 5x double-acting gripper functions - Z-axis servo-driven, 800 mm stroke - C, G, X, and B axes pneumatically actuated - Various customer-specific inputs and outputs → incl. gripper monitoring Complete maintenance log for the past 3 years - Both injection units re-sealed by Arburg - Clamping unit completely re-sealed by Arburg - Accumulator bottles replaced by Arburg in 2020 Warranty Warranty valid until initial commissioning Loading/shipping Free loading onto buyer’s truck or free delivery (CPT) for reimbursement of freight costs Worldwide delivery Available ex stock in Hannover, Germany Information about our offered machines and company: - We only sell machines that we have purchased from active production, available from our warehouse in Hannover - All offered machines are inspected and tested before dismantling - We do NOT sell insolvency goods; we are NOT intermediaries dealing with third-party assets - All machines offered originate from successful companies where regular maintenance and care are a matter of course - All offered machines can be inspected at our warehouse

Condition: excellent (used), Year of construction: 2014, operating hours: 47,137 h, functionality: fully functional, machine/vehicle number: 61020607, clamping force: 1,300 kN, clearance between the columns: 470 mm, Here we, as dealers in injection moulding machines, offer the following well-maintained used injection moulding machine for sale. Of course, we also purchase well-maintained injection moulding machines from model year 2010 onwards. We have been wholesalers of used injection moulding machines for over 25 years. Important current notice – Tax information and benefit for used machines: From 01.07.2025, used machines will also be eligible for a special tax depreciation of 30% per year. In addition to the lower price compared to a new machine, you can claim the same depreciation amounts as for a new machine. Keyword: Growth booster (§ 7 paragraph 2 EStG-E). Manufacturer: Krauss Maffei Model: KM 130 750-130 CXV BluePower 2-color 2-component machine Control system: MC6 Year: 2014 Machine no.: 61020507 Operating hours: 47,137 h Complete maintenance records for the last 7 years / 25,000 operating hours 1st injection unit 750 horizontal Screw diameter: 50 mm Injection volume: 393 ccm Shot weight: 357 g Heating capacity: kW Heating zones: 5 Nozzle stroke: mm Injection pressure: 1,892 bar 2nd injection unit 180 vertical Screw diameter: 30 mm Injection volume: 85 ccm Shot weight: 77 g Injection pressure: 2,500 bar Dodpfoyf Uy Usx Al Njch Clamping unit Clamping force: 130 t / 1,300 kN Opening stroke: 600 mm Tie bar spacing: 470 x 470 mm Plate size: 745 x 770 mm Max. daylight: 900 mm Min. mould installation height: 300 mm Ejector stroke: 150 mm / ejector force: 23 kN Dimensions: 4.39 x 1.61 x 4.01 m Weight: 9,000 kg Extras – complete machine data sheet attached as PDF document Nozzle side: Needle shut-off A+C 1 x hydraulic core pull 1 x pneumatic core pull 1 x air blast Ejector side: 1 x hydraulic core pull 3 x pneumatic core pulls 1 x air blast Water BGS: 6 circuits each on nozzle and ejector side BluePower technology: up to 40% energy savings The machine is in excellent condition and can be inspected under power. Any peripheral devices shown are NOT included in the offer! The machine is available immediately. Free loaded onto buyer’s truck or delivered free to destination against reimbursement of freight costs. For information about the machines we offer and our company: - We only sell our own machines, purchased from ongoing production, from our warehouse in Hanover - All machines offered are inspected and tested prior to dismantling - We do NOT sell insolvency assets – we are NOT intermediaries trading in third-party property - All machines offered come from successful companies for whom regular maintenance is a given - All offered machines are available for viewing at our warehouse

Condition: excellent (used), Year of construction: 2014, operating hours: 43,500 h, functionality: fully functional, machine/vehicle number: 194413, clamping force: 2,200 kN, screw diameter: 55 mm, displacement volume: 475 cm³, injection pressure: 1,578 bar, injection weight: 440 g, mold height (min.): 300 mm, ejector stroke: 180 mm, opening stroke: 750 mm, overall weight: 12,740 kg, heating capacity: 13.4 kW (18.22 HP), Here, as a specialized dealer in injection moulding machines, we are offering the following well-maintained used injection moulding machine: As part of our business, we also purchase well-kept injection moulding machines from model year 2010 onwards. We have been a wholesaler of used injection moulding machines for over 25 years. Important Tax Information – Special Depreciation Benefits for Used Machines From 01/07/2025, used machines can also be tax-deducted in Germany with a special depreciation of 30% per year. In addition to the lower purchase price compared to a new machine, you can apply the same depreciation allowances as for new machinery. Keyword: Growth Booster, (§ 7 Paragraph 2 EStG-E) Manufacturer: Engel Model: VC 750 / 220 Dedpfx Aloyc Ewxj Nsch Control system: CC200 Year of manufacture: 2014 Machine No.: 194413 Operating hours: 43,500 h Injection Unit - Screw diameter: 55 mm - Shot volume: 475 ccm - Shot weight: 430 g - Heating capacity: 13.4 kW - Heating zones: 5 - Nozzle stroke: 350 mm - Injection pressure: 1179 bar (up to 1578 bar increased) Clamping Unit - Clamping force: 220 t / 2200 kN - Opening stroke: 757 mm - Max platen distance: 1050 mm - Min mould installation height: 300 mm - Ejector stroke: 180 mm / Ejector force: 80 kN Weight: 12,740 kg Extras - Core pull The machine is in excellent condition and can be inspected under power. Any peripheral devices shown are NOT included in the offer! The machine is available immediately. Delivery terms: - Free loaded onto buyer’s truck or delivered free to site against reimbursement of freight costs Information about our machines and company: - We only sell machines we have purchased from active production, stocked at our Hanover warehouse - All offered machines are tested and inspected before dismantling - We do NOT sell insolvency assets or act as brokers dealing in third-party property - All machines originate from successful, well-maintained operations - All machines offered can be inspected in our warehouse

Condition: used, mileage: 1,180,000 km, power: 220 kW (299.12 HP), first registration: 06/2006, fuel type: diesel, number of seats: 36, gearing type: automatic, emission class: euro3, color: silver, brakes: retarder, Equipment: ABS, air conditioning, parking heater, Mercedes-Benz Citaro O 530 with air conditioning Vehicle from insolvency! * MB engine 220 kW * Automatic transmission * ABS, ASR * Air conditioning Dcjdpfxex Tx Hvj Al Noh * Auxiliary heater * 36+1 seats * 54 standing places * Doors double width, inward swinging * Wheelchair / stroller space * Kneeling function * Matrix display * Retarder * Subject to errors and omissions. Further information: also via WhatsApp) Info in Polish: WhatsApp) French-speaking contact: Georges Spengelin

Condition: used, functionality: fully functional, type of input current: three-phase, input voltage: 380 V, INDUSTRIAL ELECTRIC HEAT TREATMENT FURNACE - EMISON Electric heat treatment chamber furnace manufactured by EMISON (Forns Elèctrics Emison SA, Badalona, Spain), a Spanish specialist in industrial furnaces. From an industrial company liquidation (insolvency proceedings). ═════ SPECIFICATIONS Dcedpjzbg Rqofx Al Neh ═════ - Manufacturer: EMISON (Forns Elèctrics Emison) - Country of origin: Spain (Badalona) - Type: Electric heat treatment chamber furnace - Power supply: 380V three-phase - Heating: electric resistance elements - Temperature control: analog - Large heating chamber - Robust metal frame construction - Model: [TO BE CONFIRMED FROM NAMEPLATE] - Max temperature: [TO BE CONFIRMED] - Total power: [TO BE CONFIRMED] - Chamber dimensions: [TO BE CONFIRMED] ═════ CONDITION ═════ - Used, from an industrial closure (not due to malfunction) - Frame in good condition - Sold as-is, a full inspection is welcome before pickup - Original manual NOT included - No warranty implied ═════ ABOUT THE MANUFACTURER ═════ EMISON (Forns Elèctrics Emison SA) is a Spanish industrial furnace manufacturer based in Badalona, Barcelona, and is still active today. The manufacturer provides technical support and spare parts directly for existing units. This makes EMISON furnaces a safer choice than those from defunct brands. ═════ APPLICATIONS ═════ Suitable for: - Heat treatment of metal parts (annealing, tempering, hardening preheat) - Industrial drying processes - Ceramic firing (low-medium temperature) - Curing of coatings and paints - Laboratory and R&D thermal processes - General industrial heating ═════ LOGISTICS & PURCHASE ═════ - Pickup location: Madrid, Spain (or Barcelona) - Weight: [TO BE CONFIRMED - approx. 600-1,000 kg] - Loading: forklift required - Inspection welcome by appointment - Payment: bank transfer - Documents: invoice provided - International shipping possible — buyer arranges transport Keywords: EMISON furnace, heat treatment furnace, electric industrial oven, chamber furnace, Spanish furnace, annealing oven, drying oven, tempering furnace, industrial heating equipment. For technical questions, additional photos, or to schedule an inspection, please send a message.

Condition: used, Year of construction: 2017, functionality: fully functional, ATTSU GE-45 ELECTRIC STEAM GENERATOR / BOILER (2017) Electric steam generator manufactured by ATTSU (Spain), model GE-45, year 2017. From an industrial company liquidation (insolvency proceedings) — fully functional, not from a breakdown. ═════ SPECIFICATIONS ═════ - Manufacturer: ATTSU (renowned Spanish steam technology manufacturer) - Model: GE-45 - Year of manufacture: 2017 - Type: Electric steam generator (NO burner, NO fuel/gas needed) - Steam production: approximately 45 kg/h - Max working pressure: [TO BE CONFIRMED] - Electric power: [TO BE CONFIRMED] - Voltage: 380V three-phase, 50 Hz - Tank capacity: [TO BE CONFIRMED] - Construction: robust steel frame - Approximate weight: 250 kg ═════ KEY ADVANTAGES OF THIS UNIT ═════ - ELECTRIC heating — no fuel, no burner, no chimney needed - Recent unit (2017) — relatively low usage - Cleaner installation than diesel/gas boilers - Simpler maintenance than combustion boilers - No fuel storage tanks required - Lower regulatory burden (no combustion permits) - Modern controls and safety systems ═════ CONDITION ═════ - Used, from industrial closure (NOT from a breakdown) - Recent unit, only 8-9 years old - In good condition, fully functional - Sold as-is, full inspection welcome before pickup - CE certification visible on nameplate - No warranty implied - Buyer responsible for new registration if required in destination country ═════ ABOUT THE MANUFACTURER ═════ ATTSU is a leading Spanish manufacturer of steam generation equipment, founded in 1959 and still active today. ATTSU products are known for quality construction, durability, and excellent technical support availability. Spare parts and service support are available throughout Europe and worldwide. Original ATTSU GE-45 new unit price (current market): €18,000-25,000. ═════ APPLICATIONS ═════ Suitable for: - Small to medium industrial processes requiring clean steam - Food and beverage processing - Pharmaceutical and cosmetics production - Laundry and dry cleaning operations - Textile finishing and dyeing - Chemical and laboratory processes - Pilot plants and R&D facilities - Sterilization processes - HVAC and humidification systems ═════ LOGISTICS & PURCHASE ═════ - Pickup location: Madrid, Spain (or Barcelona) - Weight: approx. 250 kg - Loading: forklift required - Inspection welcome by appointment - Payment: bank transfer - Documents: invoice and original nameplate - International shipping possible — buyer arranges transport IMPORTANT FOR INTERNATIONAL BUYERS: Dcedpfx Alozbg Sue Nsh Steam generators are pressure equipment regulated under European PED 2014/68/EU directive. The unit has its original CE certification. Buyers in EU countries should verify local registration requirements Keywords: ATTSU GE-45, electric steam generator, electric steam boiler, 45 kg/h steam, industrial steam, clean steam boiler, generador de vapor eléctrico, caldera de vapor.

Condition: used, functionality: fully functional, LOT OF ~60 LENZE GEAR MOTORS - BULK SALE OPPORTUNITY Complete lot of approximately 60 LENZE gear motors of various sizes and configurations. From an industrial company liquidation (insolvency proceedings) in Spain – the units were in active service in functioning production lines until the plant closure. ═════ WHAT YOU GET ═════ - ~60 LENZE gear motors on 3 pallets - Mixed power ratings: from 0.18 kW to approximately 7.5 kW - Various gearbox types: coaxial, parallel shaft, helical-bevel, and worm gear configurations - Standard mounting: B3, B5, B14 (mixed) - Some units include integrated brakes - Voltage: 230/400V three-phase, 50 Hz - Mostly IP55 protection class ═════ ABOUT LENZE ═════ LENZE is one of the leading European manufacturers of drive technology, founded in Germany in 1947. LENZE gear motors are known for: - Premium build quality - Long service life - Wide availability of spare parts worldwide - Reusability in industrial applications across all sectors - Excellent resale value compared to other brands ═════ CONDITION ═════ - Used units, removed from working production lines - NOT from breakdowns – plant closure liquidation - Previous owner statement: “older units but functional” - Sold as-is, full inspection welcome - Buyer should test individual units before final use - No warranty implied - Approximately 50-100 different models in the lot ═════ APPLICATIONS ═════ Suitable for: - Industrial resellers and spare parts dealers - Conveyor systems and material handling - Production line maintenance stocks - OEM machinery manufacturers - Industrial repair workshops Dcsdpfx Alezbg Ups Njh - Containers to Africa, South America, Asia - Recovery and refurbishment businesses ═════ COMMERCIAL TERMS ═════ - Sale mode: COMPLETE LOT only (no individual selection) - Detailed inventory available upon request (catalog available upon request) - Inspection welcome by appointment - Pickup location: Madrid, Spain - Total weight: ~800 kg (3 pallets) - Loading: forklift required - Payment: bank transfer - Documents: invoice and pallet inventory ═════ WHY THIS LOT IS A GOOD INVESTMENT ═════ A new LENZE gear motor of medium size (1-2 kW) costs €600-1,200 in 2026. Replacement LENZE units have lead times of 4-12 weeks from the factory. This lot provides immediate availability of ~60 functional units with mixed configurations, ideal for: - Maintenance departments that need quick replacements - Resellers building inventory - Refurbishment shops for African and Asian markets Estimated equivalent new value of this lot: €25,000-45,000. ═════ INTERNATIONAL SHIPPING ═════ International buyers welcome. Container loading possible. Buyer arranges transport and customs documentation. We provide a commercial invoice and packing list.

Condition: used, rotational speed (min.): 1,460 rpm, rotational speed (max.): 1,460 rpm, input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, overall weight: 250 kg, INDUSTRIAL PISTON COMPRESSOR WITH SIEMENS 1LA3 11 KW MOTOR Industrial twin-cylinder V-configuration piston compressor driven by a SIEMENS 1LA3 three-phase motor. From an industrial company liquidation (insolvency proceedings) — not faulty, fully available for inspection. ═════ COMPRESSOR SPECIFICATIONS ═════ - Type: V-configuration twin-cylinder piston compressor - Cylinder head: heavy cast iron with cooling fins - Transmission: belt drive with large flywheel - Air intake: 2 lateral filters with caps - Electrical cabinet with main switch included - Robust integrated metal base frame - Machine N°: 1101 - Estimated capacity: 1,000-1,800 l/min - Working pressure: 8-10 bar Djdpfxjzawuds Al Nech ═════ MOTOR SPECIFICATIONS - SIEMENS 1LA3 ═════ - Brand: SIEMENS (premium German manufacturer) - Model: 1LA3 163-4AA-20 - Frame size: IEC 160M - Power: 15 HP / 11 kW - Voltage: 220/380V three-phase - Speed: 1,460 rpm (4-pole motor) - cos φ: 0.86 - Frequency: 50 Hz - Protection class: IP44 - Insulation class: B - Mounting form: B3 (foot-mounted) - Standard: VDE 0530 - Serial number: LCL2055152 - Connection: VAY 38/22 The SIEMENS 1LA3 series is one of the most reliable industrial motor lines, manufactured between the late 80s and mid 90s. Known for excellent winding quality, heavy-duty bearings, and exceptional longevity. Service parts and technical support available worldwide. ═════ INCLUDED IN THE SALE ═════ ✓ Complete twin-cylinder compressor head ✓ SIEMENS 1LA3 11 kW motor ✓ Belt drive system with large flywheel ✓ Two air intake filters with caps ✓ Electrical cabinet with main switch ✓ Robust metal base frame NOT INCLUDED: ✗ Air tank / receiver (must be added by buyer) ═════ CONDITION ═════ - From industrial closure (not from breakdown) - Good general appearance, clean and complete - SIEMENS motor — premium brand with worldwide service and spare parts availability - Sold as-is, full inspection welcome before pickup - No warranty implied ═════ APPLICATIONS ═════ Professional industrial compressor suitable for: - Medium-sized mechanical workshops with multiple simultaneous pneumatic stations - Metal and aluminum carpentry workshops - Body shops and industrial paint booths - Boilermaking with heavy pneumatic tools - General light industrial production - Tire shops and automotive workshops Equivalent new compressor on the market: €4,500-7,000 The motor alone (SIEMENS 1LA3 163-4AA-20 IEC 160M) has a standalone resale value of €400-700 as an industrial spare part. ═════ LOGISTICS & PURCHASE ═════ - Pickup location: Madrid, Spain - Weight: approx. 250 kg - Loading: forklift required at pickup - Inspection welcome by appointment - Payment: bank transfer - Documents: invoice provided - International shipping possible — buyer arranges transport and customs

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, CNC Plasma Cutting System 6000x3000 mm – EPL 3060 ERMAKSAN 5 AXES – Hypertherm XPR300 with OPTIMIX – Bevel Unit YEAR OF MANUFACTURE: 2024 The machine was newly sold at the end of 2024 and is being offered for sale due to the company’s insolvency. The photos in the listing were taken during the commissioning phase; current photos will be provided at a later date. CNC Plasma Cutting System • Machine type: CNC plasma cutting table • Condition: Used – in good operating condition • Availability: Immediately available Djdpoy Ipb Tjfx Al Njch Working Area • Cutting table size: approx. 6000 × 3000 mm Plasma System • Plasma power source: Hypertherm XPR300 High-definition plasma system for precise and fast cutting of mild steel, stainless steel, and aluminum. Features • Bevel unit: BEVEL-R (5-axis bevel cutting system) for weld seam preparation and bevel cuts Extraction System • Sturdy, industrial gantry construction • High precision and productivity • Bevel cutting capability for complex parts

Condition: good (used), Schaefer shelving unit, type R 3000 Over 2000 meters available As good as new 50 cm depth available Negotiable price: € 2,550.00 net Offer consists of: Approx. 20 linear meters of shelving, 2.3 m high, 50 cm deep, 100 kg load/compartment. Field width approx. 100 cm 21 uprights or frames, 2.3 m, galvanized 100 shelves, 100 kg load/compartment, galvanized 4 cross braces for reinforcement. Dodpfx Aleb Rhhge Njch 5 levels per field (of course more are possible for an additional charge) Other configurations possible. Heights 2.3m, 2.5m or 3m available. Shipping/transport costs on request Viewing possible at any time by arrangement. (Subject to changes and errors in the technical data, information and prices as well as prior sale! See our terms and conditions, all prices excl. VAT ex warehouse) Purchase/sale We are constantly looking for or offering numerous items from a wide range of areas broom-clean business clearances business liquidations fast - flexible - quick-witted! We also clear and/or dispose of for insolvency administrators. Write to us with a few keywords and we will get back to you immediately.

Condition: not inspected (used), Dear Sir or Madam We hereby offer you the following device for sale: Keyence Agilista 3200W 3D printer. The machine is sold with the equipment documented in the photos and recorded in the advert text. Location: 40764 Langenfeld ATTENTION: The device comes from an insolvency. We are auctioning it for the highest bid on behalf of the creditor/bank. This is a closed auction. We do not give any information about the current highest bid. Your bid becomes binding upon receipt by e-mail. Dedowktwkopfx Al Noch Please inform us of your binding bid by 07.12.2025 at 10 am. You will be informed of the outcome of the auction within 72 hours of the end of the auction.

Condition: used, functionality: unexamined, Kaeser CB131 C – Blower Compressor / Rotary Lobe Blower Technical data: • Rated drive motor power: 15.0 kW • Maximum final pressure: 1.81 bar Dcsdpfxoy Idqio Al Neh • Capacity: 7.93 m³/min (≈ 475 m³/h) • Block speed: 3,560 rpm • Permissible ambient temperature: 3 – 40 °C • Total weight: approx. 570 kg Location: 6460 Imst, Tyrol (Brennbichl 20) Note: The machine is located in a basement room and must be removed before collection. Offered for sale by Auction House Köck on behalf of the insolvency administrator. Viewing possible by appointment.