Used Heller Mcp 250 for sale (55)

Condition: ready for operation (used), Year of construction: 2000, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 710 mm, controller manufacturer: SIEMENS, controller model: 840D, spindle speed (max.): 6,000 rpm, number of slots in tool magazine: 52, number of axes: 4, This 4-axis HELLER MCP 250 was manufactured in 2000. It features a maximum spindle speed of 6000 rpm and an automatic tool changer with 52 positions. The machine is equipped with twin pallets and offers an XYZ travel of 800 x 800 x 710 mm. If you are looking to get high-quality machining capabilities, consider the HELLER MCP 250 horizontal machining centre we have for sale. Contact us for further details. • Automatic tool changer (ATC): 52 tools Additional equipment Todpey Ef D Eefx Al Aec • Twin pallet changer Technical Specification Taper Size SK 50

Condition: ready for operation (used), Year of construction: 2007, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, controller manufacturer: SIEMENS, controller model: 840D, spindle speed (max.): 6,000 rpm, number of slots in tool magazine: 100, number of axes: 4, This 4-axis HELLER MCH 250 was manufactured in 2007. It features a spindle speed of 6000 rpm and a BT50 tool holder. The machine is equipped with an automatic tool changer that holds 100 tools, enhancing productivity. If you are looking to get high-quality machining capabilities, consider the HELLER MCH 250 horizontal machining centre we have for sale. Contact us for further details. • 4th axis rotary table, 1-degree indexing • Probe (workpiece/tool probing system) Tjdpfxey Epfve Al Aec Technical Specification Taper Size BT 50

Year of construction: 2005, condition: used, functionality: unexamined, machine/vehicle number: 46787, 46787 Machining center for centric turning operations on crankshafts or shaft-like components with 2 independent machining spindles. Control: Siemens 840D Tool holder: Heller turning broaching wheel 45 tool positions around the circumference Tool diameter: Ø700 in nominal dimensions – tools are not included, but can be acquired or newly manufactured for an additional charge. NC-controlled steady rest supports – without steady rests Retractable 3-jaw chuck on both sides, manufactured by Blessing Automatic loading door from above with a loading interface Tsdpfx Ajzdpvgol Aoc Dedicated chip conveyor with high discharge The machine can currently be inspected while powered on. Setup of components is possible after consultation and for an additional charge, including documentation of replacement parts and tools. Safeguarding of the control system and drives is included – delivery free to site. This is the machine base of a 1250mm machine; however, the usable length is limited to approximately 680mm between centers due to the main drive shaft. With a new main drive shaft, a length of over 1050mm would be possible. Year of production: 2005 Machine for centric turning operations of crankshafts or shaft-typical parts with 2 individual machining spindles Machine control: Siemens 840D Tool adapter: Heller turning broaching wheel 45 tool positions around the circumference Tool diameter Ø700 nominal – tools are not included and may be subject to a separate purchase or new procurement from the supplier. NC-controlled roller support – no workrest included Retractable 3-jaw chuck on both sides from Company Blessing Automatic gantry door for overhead loading and corresponding interface Individual chip conveyor with high drop Machine can be inspected while powered on upon request Setup of individual parts possible for a separate cost, including documentation of change-over parts and tooling Safeguarding of control and drives included – free location Machine base is DRZ1250 – effectively, on current driveshaft, limited to 680mm length; with a new driveshaft, it could be extended up to 1050mm.

Condition: used, Year of construction: 1955, saw blade diameter 70 - 230 mm Tedpfxjtqqk Nj Al Asc sawblade width 12 mm hole of sawblade 10 - 50 mm grinding wheel diameter 120 mm grinding wheel width 6 mm grinding wheel hole diameter 32 mm no. of teeth 30 - 400 total power requirement 0,33 kW weight of the machine ca. 350 kg dimensions of the machine ca. 0,80 x 0,70 x 1,70 m

Condition: ready for operation (used), Year of construction: 2006, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, controller manufacturer: SIEMENS, controller model: 840D, spindle speed (max.): 6,000 rpm, number of slots in tool magazine: 100, number of axes: 4, This 4-axis HELLER MCH 250 was manufactured in 2006. It features a maximum spindle speed of 6000 rpm and a robust tool capacity of 100 tools in the automatic tool changer. The machine is equipped with twin pallets, enhancing productivity and efficiency. If you are looking to get high-quality machining capabilities, consider the HELLER MCH 250 horizontal machining centre we have for sale. Contact us for further details. Tedoy H D T Uspfx Al Asc • Twin pallet Technical Specification Taper Size SK 50

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, controller model: Siemens 840D, spindle speed (max.): 12,500 rpm, TECHNICAL DETAILS Travel range, X-axis: 800 mm Tsdpfezncnkox Al Asc Travel range, Y-axis: 800 mm Travel range, Z-axis: 800 mm Spindle speed: 12,500 rpm Number of axes: 4 Pallet size: 630 × 630 mm Max. tool length: 600 mm MACHINE DETAILS Control system: Siemens 840D

Year of construction: 2006, condition: ready for operation (used), Travel X/Y/Z: 800mm/800mm/800mm, feed force X/Y/Z: 15000N/15000N/17500N, feed speed X/Y/Z: 50m/min, max. rotary table speed: 25rpm, spindle diameter: 100mm, tool holder: HSK 100, spindle power S1-100%: 40kW, spindle speed: 6000rpm. Magazine capacity for a maximum tool diameter of 280mm: 23. Max. pallet dimensions X/Y: 630mm/630mm, max. pallets in the system: 6, coolant tank volume: 1500l, 50bar high-pressure pump delivery rate: 22l/min. Machine dimensions X/Y/Z: approx. 6300mm/4900mm/4000mm, weight: approx. 19,300kg, control: Siemens 840D powerline, operating hours: 74,637h. Includes integrated tool monitoring IPM, remote diagnostics via modem, Renishaw MP10 touch probe, RSP 4-position round storage, chip removal, coolant system with Knoll VRF 250 vacuum rotary filter, pallet changing device, 6 pallets, 4 of which are clamping towers with universal clamping bars, approx. 100 HSK 100 tool holders, and Losma filter system. Documentation available. On-site inspection is possible. Expected to be available from the end of January 2025. Tedpeuxdhusfx Al Ajc

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Control system: Siemens 840D-SL Tool positions: 160 Tool holder: HSK 63 Spindle speed: 10,000 rpm / 242 Nm Pallet size: 630 x 500 mm Number of pallets: 2 X-axis: 800 mm Y-axis: 800 mm Tsdoz E Hxlopfx Al Aoc Z-axis: 1000 mm Table load capacity: max. 1000 kg

Condition: refurbished (used), Year of construction: 2012, functionality: fully functional, Year of manufacture: 2012 Control system: Siemens 840D SL Spindle: SC63, 16,000 rpm, 40 kW, 96 Nm Tool clamping system: HSK 63 Tool magazine / positions (options): Chain / 54 Tedpfx Alezpyg To Aec Rotary table: 360,000° x 0.001° Coolant system: KNOLL, VRF 250, IKZ 50 bar, (work area flushing) Working area XYZ (mm): 630 / 630 / 630 Pallet size (mm): 500 x 400 Workpiece clamping: Hydraulic, 60 bar Additional options, special features: Infrared receiver for measuring probe (RENISHAW); SBBK; Pneumatic support control at the workpiece setup station; Status indicator light; Chip conveyor for wet machining;

Condition: used, Year of construction: 2007, operating hours: 40,933 h, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,000 mm, controller manufacturer: Siemens, controller model: 840D PL, table width: 630 mm, table length: 630 mm, spindle speed (max.): 8,000 rpm, number of spindles: 1, Machine name / type: HELLER / MCH 280 C Operating hours: 40.933h Year of construction: 2007 Control unit: Siemens 840D PL Spindle: 8.000 rpm (43 kW/ 822 Nm) Tool clamping system: HSK 100 Tool magazine / places (Options): Rack / 234 (Operating panel at the tool loading station with terminal) Rotary table: 360.000° X 0,001° Coolant unit: KNOLL, VRF 250, IKZ 70 bar, (work area flushing) Positioning range XYZ (mm): 100 / 1000 / 1000 Pallet size (mm): 630 X 630 Tjdpsxwpmxsfx Al Asc Workpiece clamping: mechanical Additonal options: Receiver for measuring probe (RENISHAW); interface exhaust system; additional weight for pallets; drill fracture sensing; status lamp; interface exhaust system; integrated tool and collision monitoring; toolshaft cleaning; tool codechip; Interface handheld;

Condition: ready for operation (used), Year of construction: 2008, travel distance X-axis: 630 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 630 mm, controller model: Siemens 840D SL, rotational speed (max.): 10,000 rpm, number of slots in tool magazine: 54, Equipment: chip conveyor, - Direct measuring system Tjdpfozugt Dsx Al Aec - Drill breakage monitoring - Chip conveyor - Knoll coolant system with high pressure - Tool changer: 54-position - Tool holder: SK40 - Pallet changer: 2-position - Pallet size L/W: 500 x 400 mm

Condition: good (used), Year of construction: 2017, Ref. -No.: 10596 Manufacturer: HELLER Type: H - 2000 Year of construction: 2017 Type of control: CNC-Steuerung Control: Siemens 840 D Storage location: Halberstadt Country of origin: Germany Machine-No.: 56XXX X-Travel: 630 mm Y-Travel: 630 mm Z-Travel: 630 mm B-Axis: 0,001 ° Table Load: 500 kg Max. Tool Length: 350 mm Max. Tool Diameter: 160 mm Tool Taper: HSK 63 Numbers Of Tools In Magazin: 80 Turning Speeds: 16000 RPM Tool changer: Doppelgreifer Max. Workpiece height: 850 mm Todpfx Ajx Hn D Dol Ajc Max. Torque: 95 Nm Rapid Travel X/Y/Z: 60 mm / min Rapid Traverse X-Axis: 80 m / min Rapid Travel Y-Axis: 80 m / min Rapid Traverse Z-Axis: 90 m / min Drive Capacity - Spindle Motor: 40 kW Internal cooling: 50 bar Numbers Of Pallets: 2 Size Of Pallet: 400 x 500 mm spindle running time: 1000 H Operating hours: 3000 H Workpiece interference circuit max.: 720 mm Media interface: 5 - fach Further information: - Equipped with NC rotary table. - State-of-the-art spindle technology. - Ideal for precise machining tasks. - Spindle hours: 1000. - Pallet can be rotated manually 4 x 90 - Hydraulic pressure 200 bar - Quick drill breakage check Machine can be viewed under power by arrangement

Condition: used, Year of construction: 1987, functionality: fully functional, input voltage: 380 V, type of input current: three-phase, We offer this used HELLER BEA 05 horizontal machining center, year of construction 1987. Type: BEA 05 Serial number: 40311 Year of manufacture: 1987 Phase: 3~ Tjdpfxozivzys Al Aec Voltage: 380 V Frequency: 50 Hz Nominal current: 79 A Circuit diagram number: 5151 Manufacturer: HELLER Model: BEA 05 Year of manufacture: 1987 Control: uni-Pro NC80-C Technical Specifications Vertical CNC Machining Center CNC control: uni-Pro NC80-C Vertical spindle SK50 spindle taper Rotary CNC table (4th axis) Automatic tool changer Machine weight: approx. 7,000 kg Installed power: 50 kW Power supply: 380 V / 50 Hz Air supply: 6 bar Floor space required: approx. 4.0 × 4.2 × 3.1 m The machine is working and used condition. If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: good (used), Year of construction: 2011, Ref. -No.: 10598 Manufacturer: HELLER Type: MC 2000 Year of construction: 2011 Type of control: CNC-Steuerung Control: Siemens 840 D sl Storage location: Halberstadt Country of origin: Hermany Machine-No.: 50XXXX X-Travel: 800 mm Y-Travel: 800 mm Z-Travel: 1000 mm Work spindle torque (25% ED): 242 Nm Tool Taper: SK 40 Numbers Of Tools In Magazin: 54 Tool Piece Magazine With: 80 Pcs./pcs. Turning Speeds: 10000 RPM Drive Capacity - Spindle Motor: 17 kW High-Pressure Pump: 50 bar Speed range - main spindle: 10000 RPM Numbers Of Pallets: 2 Size Of Pallet: 630 x 500 mm Weight Of The Machine Ca.: 13000 t spindle running time: 7000 H Operating hours: 14000 H Preparation area: 4 x 90° hydraulic pressure: 200 bar Further information: - The machine has been measured - The geometry is in excellent condition - The spindle runs a little rough - Clamping towers and cutting tool holders are also included - 2 additional clamping towers - 2 replacement pallets - 2-axis servo tool changer - Scraper conveyor for dry machining - Cold light in the work area - Central cooling unit for motor spindle and control cabinet - Control unit at the workpiece setup station Tedpfjx Hn D Rsx Al Aec - NC-controlled rotary table - Clamping hydraulics The machine can be viewed under power by appointment.

Condition: ready for operation (used), Year of construction: 2005, travel distance X-axis: 630 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 630 mm, controller manufacturer: SIEMENS, controller model: SINUMERIK 840D, total height: 3,200 mm, total width: 3,400 mm, overall weight: 9,000 kg, spindle speed (max.): 10,000 rpm, spindle motor power: 38,000 W, number of slots in tool magazine: 40, product length (max.): 6,250 mm, number of axes: 4, This 4-axis HELLER MCI 16 vertical machining centre was manufactured in 2005. It features a robust X, Y, and Z-axis travel of 630 mm, with a maximum spindle speed of 10,000 rpm and a tool magazine capacity of 40 pockets. The machine has a total connected load of approximately 69 kVA and weighs 9,000 kg. If you are looking to get high-quality machining capabilities, consider the HELLER MCI 16 vertical machining centre we have for sale. Contact us for further details. - Voltage: 400 V- Frequency: 50 Hz- Nominal Current: 99 A- Total Connected Load: approx. 69 kVA- Feed Rates (X, Y, Z): 1 - 60,000 mm/min- Rapid Traverse (X, Y, Z): 60,000 mm/min- Acceleration (X, Y, Z): 10.0 m/s²- Rotary Table Indexing Precision: 360 x 1°, precision 6"- Maximum clamping force of the rotary table: 500 daN- Rotary Table Max Tangential Torque: 10,000 Nm- Rotary Table Max Tilting Moment: 8,000 Nm- B-Axis Speed: 40 rpm- Pallet Changer Size: 400 x 500 mm, 61 x M12 mounting thread- Tool Chain Magazine Capacity: 40 tool pockets- Max Tool Diameter: 72 mm (all pockets occupied) / 150 mm (with free adjacent pockets)- Max Tool Length: 320 mm- Max Tool Weight: 12 daN- Spindle Max Power (S6-40%): 38 kW (from 1500 rpm)- Spindle Max Torque (S6-40%): 240 Nm (up to 1500 rpm)- Max Spindle Speed: 10,000 rpm- Measuring System: Direct with linear scales- Positioning Tolerance: 0.007 mm- Coolant Capacity: approx. 1,500 L- Optional Equipment / Features: Central cooling unit for spindle and cabinet, hydraulic workpiece clamping, run-out inspection device RLE1, mechanical drill breakage control, coolant lubricant system with chip conveyor, Renishaw probe, manual rotatable workpiece setup station (4x90°)- Included Components: 2x hydraulic clamping devices, 2x machine pallets Technical Specification Taper Size SK 40 Tsdpfxoz Dhdaj Al Asc

Condition: good (used), Year of construction: 2020, functionality: fully functional, operating hours: 5,800 h, travel distance X-axis: 1,250 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,100 mm, workpiece height (max.): 1,400 mm, workpiece weight (max.): 2,000 kg, controller manufacturer: Siemens, controller model: 840D SL, torque: 1,146 Nm, rotational speed (max.): 8,000 rpm, Machine name / type: HELLER / H 8000 Tsdpeu Urgbefx Al Aec Operating hours: 5800 Year of construction: 2020 Control unit: Siemens 840D SL Spindle: EPC-Unit (8.000 1/min, 60 kW, 1146 Nm) Tool clamping system: HSK 100 Tool magazine / places: Chain / 100 Rotary table: 360.000° X 0,001° Coolant unit: KNOLL, KF 600, IKZ 70 bar, (work area flushing) Positioning range XYZ (mm): 1250 / 1200 / 1100 Pallet size (mm): 800 X 800 Workpiece clamping: mechanical Additonal options / Specifics: multi-spindle-head support (MSK); receiver for measuring probe (RENISHAW); fast drill fracture sensing (SBBK); interface exhaust system; screen blow-off device for operator door; codechip; Chip conveyor function check; Integrated process monitoring (IPM) + Monitoring function to minimize machine damage in case of collision; 3 colour status lamp; increased tool weight 35kg; scraping conveyor for wet machining; Coolant temperature control; Feed force display; Tangential control;

Condition: good (used), Year of construction: 2001, functionality: fully functional, The machine is in good technical condition, test run possible, Siemens Sinumerik 840D control system. Pallet dimensions: 500 x 630 mm Axis travels X / Y / Z: 1 - 60,000 mm/min Tool magazine: 60 positions Specifications: X axis: 800 mm Z axis: 800 mm Y axis: 800 mm Max. workpiece weight: 800 kg Spindle taper: HSK 80 A Tool diameter: 95 mm Todpfex A Ewkex Al Aec Machine weight: 12,000 kg Dimensions (L x W x H): 8000 x 4900 x 3800 mm

Condition: ready for operation (used), Year of construction: 2004, travel distance X-axis: 630 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 630 mm, controller manufacturer: SIEMENS, controller model: SINUMERIK 840D, total height: 3,200 mm, total width: 3,400 mm, overall weight: 9,000 kg, spindle speed (max.): 10,000 rpm, spindle motor power: 38,000 W, number of slots in tool magazine: 40, product length (max.): 6,250 mm, number of axes: 4, This 4-axis HELLER MCI 16 was manufactured in 2004. It features a robust X, Y, and Z-axis travel of 630 mm, with a maximum spindle speed of 10,000 rpm and a spindle power of 38 kW. The machine includes a tool magazine capacity of 40 pockets and a rotary table with a maximum clamping weight of 500 daN. If you are looking to get high-quality machining capabilities, consider the HELLER MCI 16 horizontal machining centre we have for sale. Contact us for further details. - Voltage: 400 V- Frequency: 50 Hz- Nominal Current: 99 A- Total Connected Load: approx. 69 kVA- Feed Rates (X, Y, Z): 1 - 60,000 mm/min- Rapid Traverse (X, Y, Z): 60,000 mm/min- Acceleration (X, Y, Z): 10.0 m/s²- Rotary Table Indexing Precision: 360 x 1°, precision 6"- Maximum clamping force of the rotary table: 500 daN- Rotary Table Max Tangential Torque: 10,000 Nm- Rotary Table Max Tilting Moment: 8,000 Nm- B-Axis Speed: 40 rpm- Pallet Changer Size: 400 x 500 mm, 61 x M12 mounting thread- Tool Chain Magazine Capacity: 40 tool pockets- Max Tool Diameter: 72 mm (all pockets occupied) / 150 mm (with free adjacent pockets)- Max Tool Length: 320 mm- Max Tool Weight: 12 daN- Spindle Max Power (S6-40%): 38 kW (from 1500 rpm)- Spindle Max Torque (S6-40%): 240 Nm (up to 1500 rpm)- Measuring System: Direct with linear scales- Positioning Tolerance: 0.007 mm- Coolant Capacity: approx. 1,500 L- Optional Equipment / Features: Central cooling unit for spindle and cabinet, run-out inspection device RLE1, mechanical drill breakage control, coolant lubricant system with chip conveyor, Renishaw probe, manual rotatable workpiece setup station (4x90°)- Included Components: Without clamping device, including 2x machine pallets Tsdez Dhgbspfx Al Asc Technical Specification Taper Size SK 40

Condition: ready for operation (used), Year of construction: 2001, travel distance X-axis: 630 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 630 mm, controller manufacturer: SIEMENS, controller model: SINUMERIK 840D, spindle speed (max.): 10,000 rpm, number of axes: 4, This 4-axis HELLER MC 16 was manufactured in 2001. It features a generous X, Y, and Z-axis travel of 630 mm each, along with a tool magazine capacity of 80 pockets. The machine is equipped with a rotary table capable of handling a maximum clamping weight of 500 daN. If you are looking to get high-quality machining capabilities, consider the HELLER MC 16 horizontal machining centre we have for sale. Contact us for further details. Tsdpoz Dh Dtofx Al Aoc - Rotary Table Indexing Precision: 360 x 1°, precision 6"- Maximum clamping force of the rotary table: 500 daN (centered)- Rotary Table Max Tangential Torque: 10,000 Nm (clamped)- Rotary Table Max Tilting Moment: 8,000 Nm (clamped)- Pallet Changer Size: 400 x 500 mm, 61 x M12 mounting thread- Tool Magazine Capacity: 80 tool pockets, 1 insertion pocket- Max Tool Diameter: 72 mm (all pockets occupied) / 150 mm (with free adjacent pockets)- Max Tool Length: 320 mm- Max Tool Weight: 12 daN- Measuring System: Direct in X, Y, Z axes- Positioning Tolerance: 0.007 mm- Optional Equipment / Features: Hydraulic workpiece clamping, central cooling unit for motor spindle and cabinet, probe with IR receiver, chip conveyor, tool coding, manual workpiece setup station (rotatable 4x90°), drill breakage control, prepared for emulsion mist extraction- Included Components: Without clamping device, without machine pallet Technical Specification Taper Size SK 40

Condition: ready for operation (used), Year of construction: 2010, operating hours: 29,000 h, controller manufacturer: SIEMENS, controller model: 840 D, spindle speed (max.): 12,000 rpm, It is a system composed by a HELLER MCH 350 and a HELLER MCH 350 featuring a 22 pallet system with 800x800 pallets. Both models include a 70 bar pressure system, with the MCH 350 reaching up to 12,000 RPM and the MCH 350 C up to 8,000 RPM. Consider the opportunity to buy this HELLER MCH 350 + MCH 350 C horizontal machining centre system. Contact us for more information about this system. Additional equipment • Pallets: 22 of size 800x800 Machine Benefits Technical Machine Benefits • Pressure: 70 bar on both machines Tjdpfx Alex D Skmj Aec • Tool systems: 2 x 234 hsc 100 • Mch 350 c = 8000 rpm Extra Information MCH 300 Usage: 29000 hours MCH 350 C Usage: 22105 hours

Condition: excellent (used), Year of construction: 2006, Heller MCH 280 C 5 axes Year of manufacture: 2006 Control: Siemens 840 D Todpfx Aoy Nybgjl Aec Spindle speed: 8000 rpm Travel paths X: 1000 mm Y: 1200 mm Z: 1100 mm Pallet size: 630 x 630 mm Rotary table: 360,000° x 0.001° Tool magazine positions: 400 Interface: HSK 100

Condition: good (used), Year of construction: 2018, Technical details are shown on picture. Machine is in good condition. Tjdjzrniujpfx Al Ajc Parts shown by hand not come.

Condition: used, Year of construction: 2003, Technical details: x-travel: 450 mm y-travel: 450 mm z-travel: 450 mm b-axis: 360.000 x 0.001 ° main spindle speeds:: 45-10000 1/min weight of the machine ca.: 14 t dimensions of the machine ca.: 7 x 2.45 x 3.4 m size of pallet: 320 x 320 mm number of spindles: 2 tool taper: HSK63 tool numbers: 2 x 40 spindle drive motor: 25/36 (100% / 40% ED) kW Double spindle 4-axis machining center Horizontal Todpfx Alsw Ng D Ho Aec 4 machine plates Renishaw probe Control Siemens Sinumerik 840D Working space (X / Y / Z): 450x450x450 mm Load pallet / table max .: 300 kg Acceleration: 10 m / s² Rapid traverse: 60 m / min Pallet size: 320 x 320 mm Chip-to-chip time: 2.6 s Workpiece height max .: 700 mm Tool holder: HSK 63 Tool places: 2x 60 Tool spindle: 10,000 rpm, 95 Nm Speed ??increase to 18,000 rpm Infrared receiver for probe, Make Renishaw Vaf72a0p Tool magazine with 60 places Control panel on the workstation Control panel on the tool installation site Workpiece positioning stations can be rotated manually with hydraulic workpiece clamping 60 bar Pneumatic support control on the workstation Automatic swing gate Extended coolant layer 70 bar / 1500I / VF 250 Coolant Cooler Working space flushing Emulsion mist suction Roto - Clear Automatic setup process Automatic disarming process Runtime and quantity recording Status lamp 3-color modem for remote diagnosis control cabinet lighting *

Condition: not inspected (used), Only sold as a set. We are interested in buying everything at once. Tsdozrv Avopfx Al Aec Additional photos are available upon request. The price is negotiable. For more machines, parts, and other materials, please also visit our website, CNC-Service. Do you have any questions or are you looking for something specific? Please feel free to contact us!

Condition: used, Year of construction: 2002, x-travel 630 mm y-travel 630 mm z-travel 630 mm Control Siemens type 840 D size of pallet 400x500 mm numbers of pallets 4 360 ° turning speeds 10-16000 U/min Tool changer 160 Pos. spindle taper: HSK 63 total power requirement 55 kW Tjdpfxjyqt Axe Al Asc weight of the machine ca. 11 t Machine with Siemens 840 D control for 4 axes - Digital drive technology, direct position measuring systems - 4-position pallet changer - Full B-axis - Coolant system with internal coolant supply - Hydraulic workpiece clamping - Filtration system The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team