Used Heller Bea 1 for sale (59)

Condition: used, Technical characteristics: HORIZONTAL MACHINING CENTER AUTOFEED 8 PALLETS Lhjdpfx Ahs Dvlxe Sen 140 TOOL ISO50

Condition: ready for operation (used), Year of construction: 2005, travel distance X-axis: 630 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 630 mm, controller manufacturer: SIEMENS, controller model: SINUMERIK 840D, total height: 3,200 mm, total width: 3,400 mm, overall weight: 9,000 kg, spindle speed (max.): 10,000 rpm, spindle motor power: 38,000 W, number of slots in tool magazine: 40, product length (max.): 6,250 mm, number of axes: 4, This 4-axis HELLER MCI 16 vertical machining centre was manufactured in 2005. It features a robust X, Y, and Z-axis travel of 630 mm, with a maximum spindle speed of 10,000 rpm and a tool magazine capacity of 40 pockets. The machine has a total connected load of approximately 69 kVA and weighs 9,000 kg. If you are looking to get high-quality machining capabilities, consider the HELLER MCI 16 vertical machining centre we have for sale. Contact us for further details. - Voltage: 400 V- Frequency: 50 Hz- Nominal Current: 99 A- Total Connected Load: approx. 69 kVA- Feed Rates (X, Y, Z): 1 - 60,000 mm/min- Rapid Traverse (X, Y, Z): 60,000 mm/min- Acceleration (X, Y, Z): 10.0 m/s²- Rotary Table Indexing Precision: 360 x 1°, precision 6"- Maximum clamping force of the rotary table: 500 daN- Rotary Table Max Tangential Torque: 10,000 Nm- Rotary Table Max Tilting Moment: 8,000 Nm- B-Axis Speed: 40 rpm- Pallet Changer Size: 400 x 500 mm, 61 x M12 mounting thread- Tool Chain Magazine Capacity: 40 tool pockets- Max Tool Diameter: 72 mm (all pockets occupied) / 150 mm (with free adjacent pockets)- Max Tool Length: 320 mm- Max Tool Weight: 12 daN- Spindle Max Power (S6-40%): 38 kW (from 1500 rpm)- Spindle Max Torque (S6-40%): 240 Nm (up to 1500 rpm)- Max Spindle Speed: 10,000 rpm- Measuring System: Direct with linear scales- Positioning Tolerance: 0.007 mm- Coolant Capacity: approx. 1,500 L- Optional Equipment / Features: Central cooling unit for spindle and cabinet, hydraulic workpiece clamping, run-out inspection device RLE1, mechanical drill breakage control, coolant lubricant system with chip conveyor, Renishaw probe, manual rotatable workpiece setup station (4x90°)- Included Components: 2x hydraulic clamping devices, 2x machine pallets Lodpjz Dhdaefx Ah Sjhn Technical Specification Taper Size SK 40

Condition: ready for operation (used), Year of construction: 2004, travel distance X-axis: 630 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 630 mm, controller manufacturer: SIEMENS, controller model: SINUMERIK 840D, total height: 3,200 mm, total width: 3,400 mm, overall weight: 9,000 kg, spindle speed (max.): 10,000 rpm, spindle motor power: 38,000 W, number of slots in tool magazine: 40, product length (max.): 6,250 mm, number of axes: 4, This 4-axis HELLER MCI 16 was manufactured in 2004. It features a robust X, Y, and Z-axis travel of 630 mm, with a maximum spindle speed of 10,000 rpm and a spindle power of 38 kW. The machine includes a tool magazine capacity of 40 pockets and a rotary table with a maximum clamping weight of 500 daN. If you are looking to get high-quality machining capabilities, consider the HELLER MCI 16 horizontal machining centre we have for sale. Contact us for further details. - Voltage: 400 V- Frequency: 50 Hz- Nominal Current: 99 A- Total Connected Load: approx. 69 kVA- Feed Rates (X, Y, Z): 1 - 60,000 mm/min- Rapid Traverse (X, Y, Z): 60,000 mm/min- Acceleration (X, Y, Z): 10.0 m/s²- Rotary Table Indexing Precision: 360 x 1°, precision 6"- Maximum clamping force of the rotary table: 500 daN- Rotary Table Max Tangential Torque: 10,000 Nm- Rotary Table Max Tilting Moment: 8,000 Nm- B-Axis Speed: 40 rpm- Pallet Changer Size: 400 x 500 mm, 61 x M12 mounting thread- Tool Chain Magazine Capacity: 40 tool pockets- Max Tool Diameter: 72 mm (all pockets occupied) / 150 mm (with free adjacent pockets)- Max Tool Length: 320 mm- Max Tool Weight: 12 daN- Spindle Max Power (S6-40%): 38 kW (from 1500 rpm)- Spindle Max Torque (S6-40%): 240 Nm (up to 1500 rpm)- Measuring System: Direct with linear scales- Positioning Tolerance: 0.007 mm- Coolant Capacity: approx. 1,500 L- Optional Equipment / Features: Central cooling unit for spindle and cabinet, run-out inspection device RLE1, mechanical drill breakage control, coolant lubricant system with chip conveyor, Renishaw probe, manual rotatable workpiece setup station (4x90°)- Included Components: Without clamping device, including 2x machine pallets Technical Specification Taper Size SK 40 Lhodsz Dhgbepfx Ah Ssn

Year of construction: 2005, condition: used, functionality: unexamined, machine/vehicle number: 46787, 46787 Machining center for centric turning operations on crankshafts or shaft-like components with 2 independent machining spindles. Control: Siemens 840D Tool holder: Heller turning broaching wheel 45 tool positions around the circumference Tool diameter: Ø700 in nominal dimensions – tools are not included, but can be acquired or newly manufactured for an additional charge. NC-controlled steady rest supports – without steady rests Retractable 3-jaw chuck on both sides, manufactured by Blessing Automatic loading door from above with a loading interface Dedicated chip conveyor with high discharge The machine can currently be inspected while powered on. Setup of components is possible after consultation and for an additional charge, including documentation of replacement parts and tools. Safeguarding of the control system and drives is included – delivery free to site. This is the machine base of a 1250mm machine; however, the usable length is limited to approximately 680mm between centers due to the main drive shaft. With a new main drive shaft, a length of over 1050mm would be possible. Year of production: 2005 Machine for centric turning operations of crankshafts or shaft-typical parts with 2 individual machining spindles Machine control: Siemens 840D Tool adapter: Heller turning broaching wheel 45 tool positions around the circumference Tool diameter Ø700 nominal – tools are not included and may be subject to a separate purchase or new procurement from the supplier. NC-controlled roller support – no workrest included Retractable 3-jaw chuck on both sides from Company Blessing Automatic gantry door for overhead loading and corresponding interface Individual chip conveyor with high drop Machine can be inspected while powered on upon request Setup of individual parts possible for a separate cost, including documentation of change-over parts and tooling Safeguarding of control and drives included – free location Machine base is DRZ1250 – effectively, on current driveshaft, limited to 680mm length; with a new driveshaft, it could be extended up to 1050mm. Lsdpozdpvgsfx Ah Sohn

Condition: ready for operation (used), Year of construction: 2001, travel distance X-axis: 630 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 630 mm, controller manufacturer: SIEMENS, controller model: SINUMERIK 840D, spindle speed (max.): 10,000 rpm, number of axes: 4, This 4-axis HELLER MC 16 was manufactured in 2001. It features a generous X, Y, and Z-axis travel of 630 mm each, along with a tool magazine capacity of 80 pockets. The machine is equipped with a rotary table capable of handling a maximum clamping weight of 500 daN. If you are looking to get high-quality machining capabilities, consider the HELLER MC 16 horizontal machining centre we have for sale. Contact us for further details. - Rotary Table Indexing Precision: 360 x 1°, precision 6"- Maximum clamping force of the rotary table: 500 daN (centered)- Rotary Table Max Tangential Torque: 10,000 Nm (clamped)- Rotary Table Max Tilting Moment: 8,000 Nm (clamped)- Pallet Changer Size: 400 x 500 mm, 61 x M12 mounting thread- Tool Magazine Capacity: 80 tool pockets, 1 insertion pocket- Max Tool Diameter: 72 mm (all pockets occupied) / 150 mm (with free adjacent pockets)- Max Tool Length: 320 mm- Max Tool Weight: 12 daN- Measuring System: Direct in X, Y, Z axes- Positioning Tolerance: 0.007 mm- Optional Equipment / Features: Hydraulic workpiece clamping, central cooling unit for motor spindle and cabinet, probe with IR receiver, chip conveyor, tool coding, manual workpiece setup station (rotatable 4x90°), drill breakage control, prepared for emulsion mist extraction- Included Components: Without clamping device, without machine pallet Technical Specification Lodpfx Aoz Dh Dteh Sjhn Taper Size SK 40

Condition: used, Year of construction: 1999, Heller MC16 103 Serial No. 32-44069 Year of manufacture: 1999 Spindle speed: 45-16000 1/min SK40 X-axis travel: 630 mm Y-axis travel: 630 mm Z-axis travel: 630 mm Number of tools: 80 Tool diameter: 70/150 mm (with adjacent, free tool positions) Tool length: 320 mm Number of pallets: 2 Pallet dimensions: 400x500 Lhsdpfx Aheydi H Ts Sen Maximum pallet load: 500 kg B-axis: NC Tool length measurement: Yes Control system: Sinumerik 840D Probe: Heidenhain

Condition: used, Year of construction: 1999, machine/vehicle number: 31-43414, Heller MC16 No. 31-43514, Year of Manufacture: 1999 Spindle Speed (rpm): 45-16000 SK40 Travel paths (mm): X 630 / Y 630 / Z 630 Rapid traverse speed (mm/min): 1-40000 Number of tools: 80 Tool diameter (mm): 70/150 (with free adjacent slots) Tool length (mm): 320 Number of pallets: 2 Pallet dimensions (mm): 400 x 500 Max. pallet load (kg): 500 B axis: NC Control: Sinumerik 840D Heidenhain measuring probe: Yes Power (kVA): 60 Machine No. 64 ATL iTM400HP No. 14916, Year: 2009 Lhodpjwffd Sjfx Ah Sen Power (kVA): 30 Deburring chamber: Standard 400 / 400 mm Max. gas filling pressure: 20 bar Siemens Multipanel with Windows CE operating system

Condition: ready for operation (used), Year of construction: 2004, operating hours: 91,012 h, functionality: fully functional, machine/vehicle number: 31-46644, The HELLER MCi 16.2 is a high-precision, CNC-controlled horizontal machining center (HMC) from the German manufacturer HELLER. The machine is designed for productive and flexible series production (e.g., in mechanical engineering or the automotive sector). Equipment: -Horizontal spindle, pallet changer with rotary table, additional 4-position pallet changer (manufacturer: RILE RSP-MC+16.2, year of manufacture: 2004, serial number: 0421635093) -2nd operator terminal, chain-type tool changer with approximately 80 positions, chip conveyor (manufacturer: Knoll 600K, coolant/lubricant processing with band filter, switch cabinet, separate cooling unit (manufacturer: BKW) Control: Ljdpfez N Ewiex Ah Sjhn -Siemens 840D Accessories: -Telescopic drawer cabinet (8 drawers) with attached work surface, workbench (1 door) with partition, lighting fixture Contents: various machine accessories

Condition: excellent (used), Year of construction: 2007, Control: Siemens 840D powerline Travel paths X/Y/Z: 630/630/630 mm 2-fold pallet changer Spindle speed: 10,000 rpm Knoll coolant system with paper band filter Tool holder: SK40 Tool magazine with 80 stations Lhjdpfjzb R I Tox Ah Sjn

Condition: used, Year of construction: 1999, Technical details: x-travel: 630 mm y-travel: 630 mm Lodpfx Ahjy Rmk Rj Sehn z-travel: 630 mm control: Unipro 90 Pallet changer 2x: 400 x 500 workpiece - installed height: 800 mm max. clampable workpiece diameter: 720 - 850 mm spindle taper:: SK 40 spindle turning speed - stepless: 10 - 8000 1/min Spindle power: 20 / 30 kW Spindle Torque: 95/143 Nm tool magazin:: 80 SK 40 total power requirement: 55 kW weight of the machine ca.: 11 t Machine with Unipro 90 control for 5 axis - twin palette changer - tool magazine 80 HSK-A 63 - coolant device with coolant through spindle 7 pressure levels - full A & B-axis - chip conveyor *

Condition: ready for operation (used), Year of construction: 2021, operating hours: 15,000 h, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, controller manufacturer: SIEMENS, controller model: SINUMERIK 840D sl, spindle speed (max.): 10,000 rpm, number of slots in tool magazine: 100, number of axes: 4, This 4-axis HELLER H5000 horizontal machining centre was manufactured in 2021. It features a working range of 800 mm in all axes and a maximum workpiece diameter of 900 mm. The machine includes a tool taper of HSK-A 100 and a tool magazine capacity of 100 slots. If you are looking to get high-quality machining capabilities, consider the HELLER H5000 machine we have for sale. Contact us for further details. - Machine Count: 2 units- Control Unit: Siemens SINUMERIK 840D solution line with 24" Multitouch Main Control Panel and HELLER Operation Interface- Working Range (X/Y/Z Axes): 800 / 800 / 800 mm- Drive Package: POWER Package (Standard Drive in X/Y/Z)- Rapid Traverse (X/Y/Z Axes): 50 m/min- Acceleration (X/Y/Z Axes): 5 m/s²- Feed Force X- and Y-Axis (ED S3 -40%): 15,000 N- Feed Force Z-Axis (ED S3 -40%): 20,000 N- Feed Axis Servomotors: Incremental Encoders- Linear Axis Positioning Tolerance (Tp): 0.005 mm- Working Unit: PC 100 i Power Cutting Unit (10,000 rpm, 45 kW, 360 Nm)- Tool Taper: HSK-A 100 according to DIN 69 893- Tool Magazine: 100 Slots, Chain Type (HSK-A 100) with Comfort Operator Terminal at Tool Setup Station- Tool Breakage Control: Fast Drill Breakage Control- Collision Monitoring: Damage Minimization Monitoring System- NC Rotary Table (B-Axis): 360,000 x 0.001 deg Indexing, 25 rpm, 8 arcsec Accuracy, 12,000 Nm Max. Tangential Moment, 18,000 Nm Max. Tilting Moment- Plane Transformation: CYCLE 800- Workpiece Setup Station: Manually Rotatable 4 x 90 deg- Workpiece Clamping Interface: 5-way Media Interface, Hydraulic Pressure 200 bar Proportional Technology- Pallets: 2 Special Pallets in Basic Machine (HELLER Drawing AP.205705) with DIN Hole Pattern- Pallet Dimensions: 630 x 630 mm- Max. Workpiece Diameter: 900 mm- Max. Workpiece Height: 1,000 mm- Max. Clamping Load (Pallet 1): 1,000 kg (single-sided) / 1,400 kg (double-sided)- Pallet Change Time: 13 s (without hydraulic clamping) / 13.5 s (with hydraulic clamping)- Coolant & Chip Conveyor: Scraper Belt Conveyor for Wet Machining- Cooling Systems: Precision Water-Air Chiller Unit (Compressor) for Direct Drives of A- and B-Axes, Spindle, and Control Cabinet; Coolant Temperature Control Unit- Mist Extraction: Emulsion Extraction System- Electrical Connection: 3~ 400 V / 50 Hz, Nominal Current 65 A, Short Circuit Rating 9 kA- Total Connected Power: approx. 37 kVA (Machine) + approx. 14 kVA (VRF Coolant Unit)- Compressed Air Supply Pressure: 5 - 6 bar- Permissible Ambient Temperature: 10 - 45 °C- Material Processed: Aluminum (exclusively)- Operating Hours: approx. 12,000–15,000 hours (pending confirmation)- Operational Status: Currently installed/in place and powered onOptional Machine Equipment:- Special Mount: Multi-Spindle Heads (HELLER Drawing 00.882914 MAGNA)- Tool Measurement: RENISHAW Radio Touch Probe RMP 60 with Receiver & HELLER Measuring Cycles- Coolant Filtration Unit: Vacuum Rotary Filter KNOLL VRF 250 with 50 bar High-Pressure Internal Coolant Supply (IKZ), Working Area Flushing, 1,200 L Tank Capacity Technical Specification Taper Size HSK 100 Lhjdpoz Ixt Hofx Ah Ssn

Condition: used, Year of construction: 2003, Technical details: x-travel: 450 mm y-travel: 450 mm z-travel: 450 mm b-axis: 360.000 x 0.001 ° main spindle speeds:: 45-10000 1/min weight of the machine ca.: 14 t dimensions of the machine ca.: 7 x 2.45 x 3.4 m size of pallet: 320 x 320 mm number of spindles: 2 tool taper: HSK63 tool numbers: 2 x 40 spindle drive motor: 25/36 (100% / 40% ED) kW Double spindle 4-axis machining center Horizontal 4 machine plates Renishaw probe Control Siemens Sinumerik 840D Working space (X / Y / Z): 450x450x450 mm Load pallet / table max .: 300 kg Acceleration: 10 m / s² Rapid traverse: 60 m / min Pallet size: 320 x 320 mm Chip-to-chip time: 2.6 s Workpiece height max .: 700 mm Tool holder: HSK 63 Tool places: 2x 60 Tool spindle: 10,000 rpm, 95 Nm Speed ??increase to 18,000 rpm Infrared receiver for probe, Make Renishaw Vaf72a0p Tool magazine with 60 places Control panel on the workstation Control panel on the tool installation site Workpiece positioning stations can be rotated manually with hydraulic workpiece clamping 60 bar Pneumatic support control on the workstation Automatic swing gate Extended coolant layer 70 bar / 1500I / VF 250 Coolant Cooler Working space flushing Emulsion mist suction Roto - Clear Automatic setup process Automatic disarming process Runtime and quantity recording Status lamp 3-color modem for remote diagnosis control cabinet lighting Lhedsw Ng D Hjpfx Ah Son *

Condition: good (used), Year of construction: 1963, machine/vehicle number: 30769, saw blade diameter: 300 mm, input frequency: 50 Hz, input voltage: 380 V, Heller Brothers SA 315 -WKG 972 On offer here is an automatic saw blade grinding machine from Gebrüder Heller. Technical data: Ljdpfx Ahourkypj Sjhn Saw blade diameter: 300 mm Clamping angle: 20 ° Lateral displacement: 73 mm Power supply / connected load: 380 Volt 50 HZ Factory No.: 30769 Rated current: 2 A

Condition: used, Year of construction: 2002, x-travel 630 mm y-travel 630 mm z-travel 630 mm Control Siemens type 840 D size of pallet 400x500 mm numbers of pallets 4 360 ° turning speeds 10-16000 U/min Tool changer 160 Pos. spindle taper: HSK 63 total power requirement 55 kW weight of the machine ca. 11 t Machine with Siemens 840 D control for 4 axes - Digital drive technology, direct position measuring systems - 4-position pallet changer - Full B-axis - Coolant system with internal coolant supply - Hydraulic workpiece clamping - Filtration system The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop Lhjdpfeyqt Axjx Ah Sen If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, operating hours: 5,800 h, power: 60 kW (81.58 HP), travel distance X-axis: 1,400 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,400 mm, workpiece height (max.): 1,400 mm, workpiece weight (max.): 2,000 kg, number of axes: 4, controller manufacturer: Siemens, controller model: 840D SL, torque: 1,146 Nm, rotational speed (max.): 8,000 rpm, Equipment: CE marking, documentation/manual, Machine name / type: HELLER / H 8000 Operating hours: 5800 Year of construction: 2020 Control unit: Siemens 840D SL Spindle: EPC-Unit (8.000 1/min, 60 kW, 1146 Nm) Tool clamping system: HSK 100 Tool magazine / places: Chain / 100 Rotary table: 360.000° X 0,001° Lhodpfx Aeu Urgbjh Ssn Coolant unit: KNOLL, KF 600, IKZ 70 bar, (work area flushing) Positioning range XYZ (mm): 1250 / 1200 / 1100 Pallet size (mm): 800 X 800 Workpiece clamping: mechanical Additonal options / Specifics: multi-spindle-head support (MSK); receiver for measuring probe (RENISHAW); fast drill fracture sensing (SBBK); interface exhaust system; screen blow-off device for operator door; codechip; Chip conveyor function check; Integrated process monitoring (IPM) + Monitoring function to minimize machine damage in case of collision; 3 colour status lamp; increased tool weight 35kg; scraping conveyor for wet machining; Coolant temperature control; Feed force display; Tangential control;

Condition: used, Year of construction: 2002, Technical details: x-travel: 630 mm y-travel: 630 mm z-travel: 630 mm pallet size:: 400 x 500 mm spindle taper:: HSK 63 spindle turning speed - stepless: 10 - 16000 U/min total power requirement: 55 kW weight of the machine ca.: 11 t Lodpfx Aevgmiyeh Sshn Machine with SIEMENS 840 D control for 4 axis - digital drives - palette changer 4-fold - tool changer 160-fold - coolant device with coolant through spindle - full B-axis - chip conveyor - hydr. workpiece clamping *

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 31-44336, travel distance X-axis: 630 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 630 mm, workpiece weight (max.): 500 kg, spindle speed (max.): 24,000 rpm, No minimum price – guaranteed sale to the highest bidder! Lhedpfx Aszwd Hteh Ssn The machine spindle has been completely overhauled! TECHNICAL DETAILS Travel range X-axis: 630 mm Travel range Y-axis: 630 mm Travel range Z-axis: 630 mm Pallet size: 400 × 500 mm Number of pallets: 6 Pallet change time: 9 s Max. workpiece size: 720 × 800 mm Max. workpiece weight: 500 kg NC rotary table: B-axis B-axis rotation range: 360,000 × 0.001° B-axis rotation speed: 40 rpm Tool holder: SK 63 Max. tool diameter: 150 mm Max. tool length: 227 mm Max. tool weight: 12 kg Spindle speed: 45–24,000 rpm Spindle torque: 48/72 Nm Spindle drive: 30 kW Feed rate X/Y/Z: 1–60,000 mm/min Rapid traverse X/Y/Z: 60,000 mm/min Feed force: 10,000 Nm MACHINE DETAILS Total connected load: approx. 60 kW Connection voltage: 400 V Mains frequency: 50 Hz Total weight: approx. 12,500 kg EQUIPMENT Chip conveyor Documentation/Manual

Condition: used, Year of construction: 1999, x-travel 800 mm y-travel 630 mm z-travel 560 mm total power requirement 60 kW weight of the machine ca. 12.5 t dimensions of the machine ca. m H E L L E R (Germany) 5 Axis - CNC Controlled Horizontal Machining Centre Model FST- MC 160 / 800 / E Year 1998 Only approx. 500 hours in operation _____ Working range: Longitudinal stroke X axis 800 mm Vertical stroke Y axis 630 mm Cross stroke Z axis 560 mm NC rotary table Tilting A axis 180 ° Turning B axis 360 ° Size of pallet, approx. 250 x 620 mm Tool holder HSK 63A Spindle speeds, infinitely variable 63 - 20,000 rpm Lhsdpst Hwrhefx Ah Ssn Feeds / quick feeds XYZ 1 - 70,000 mm/min Spindle drive 24 kW Total electrical load, approx. 60 kW - 400 V - 50 Hz Weight, approx. 12,500 kg Accessories / Special Features * 5-Axis SIEMENS CNC Path Control, Model SINUMERIC 840 D, allows working operation on 5 sides. * Workpiece handling system: Workpiece is mounted on a pallet outside the machine and is transported via a conveyor into a lifting/turning device, which brings the workpiece onto the table, where it is automatically clamped and machined. * 40-position tool magazine with tool replacement door, and laser-operated tool breakage control. * Internal high pressure coolant supply, 50 bar. * Coolant preparation unit with filter and temperature control. * Oil mist exhaust. * Separate cooling aggregate for motor spindle and switch cabinet. * CO² fire extinguisher. * Chip conveyor. * Complete covers for the working area. Machine comes from the design department of an car manufacturer and was only used for trials. The new price in 1998 was approx. 1.3 million DM (EUR 650,000.00). The machine is very suitable for medium-sized production series. Ideal for aluminium.

Condition: refurbished (used), Are you interested in this product or would you like more information? Please feel free to contact us. Additional photos can be provided upon request. The price is negotiable. For more parts and other materials, please also visit our website, CNC-Service. Lhodpfszr If Aex Ah Sjn Do you have any questions or are you looking for something specific? Please feel free to contact us!

Condition: ready for operation (used), Year of construction: 2011, operating hours: 77,128 h, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,000 mm, controller manufacturer: SIEMENS, controller model: 840D solution line, spindle speed (max.): 8,000 rpm, spindle motor power: 43,000 W, number of slots in tool magazine: 50, number of axes: 4, This 4-axis HELLER H6000 horizontal machining centre was manufactured in 2011. It features a generous X, Y, and Z-axis travel of 1,000 mm each, along with a B-axis NC rotary table. The machine is equipped with a SIEMENS 840D control unit and has a maximum permissible clamping mass of 1,000 kg. If you are looking to get high-quality machining capabilities, consider the HELLER H6000 machine we have for sale. Contact us for further details. - Operating Hours (Betriebsstunden): 77,128 h- Effective Operating Time (Nutzlaufzeit): 57,997 h- Control Unit: SIEMENS 840D solution line- X-Axis Travel: 1,000 mm- Y-Axis Travel: 1,000 mm- Z-Axis Travel: 1,000 mm- Rapid Traverse Speed: 50,000 mm/min- Feed Speed: 1 - 50,000 mm/min- Acceleration: 5 m/s²- Max. Permissible Clamping Mass: 1,000 kg- Pallet Changing Time: 13 s- Pallet Changer: 2 pallet slots- Pallet Size: 630 x 630 mm (2 units in basic machine + 1 additional pallet)- Workpiece Diameter: 900 mm (1,290 mm)- Workpiece Height: 1,200 mm- Work Unit: PC 100 PowerCutting- Speed Range: 8,000 rpm- Max. Drive Power (S6-40%): 43 kW- Max. Torque (S6-40%): 822 Nm- Workpiece Table: NC Rotary Table, indexing 360,000 x 0.001°- Workpiece Setup Station: Manually rotatable pallet 4 x 90°- Workpiece Clamping: Mechanical (includes 5-fold media interface, hydraulic pressure 60 bar)- Tool Taper: HSK 100 A (DIN 69 893)- Tool Magazine: Chain magazine with 50 slots- Max. Tool Diameter (all slots occupied): 112 mm- Max. Tool Diameter (adjacent free slots): 280 mm- Max. Tool Length: 600 mm- Min. Chip-to-Chip Time (t2,3 according to VDI 2852): 4.2 s- Coolant & Chip Management: KNOLL scraper belt chip conveyor for wet machining, KNOLL KF 400 paper band filter coolant cleaning system (70 bar internal coolant supply / IKZ), work area flushing, drip tray drawing, window blow-off device- Tool Monitoring & Accessories: Fast drill breakage control, chain magazine tool shank cleaning device, process-integrated tool monitoring + collision protection monitoring, portable handwheel unit (Bedienhandgerät) with interface- Electrical Parameters: 400 V, 50 Hz, Nominal Current 87 A Technical Specification Taper Size HSK 100 Ledpoz Spt Tefx Ah Sjhn

Condition: ready for operation (used), Year of construction: 1999, spindle speed (max.): 10,000 rpm, number of axes: 4, This 4-axis HELLER MC 16-2 was manufactured in 1999. It features a Siemens control system, a robust tool magazine with 160 slots, and an HSK-63A tool holder. The spindle operates at a speed of 10,000 rpm, ideal for detailed machining tasks. If you are looking to get high-quality milling capabilities, consider the HELLER MC 16-2 machine we have for sale. Contact us for more information about this machine. • Control: Siemens Sinumerik 840D • Tool magazine: 160 • Tool holder type: HSK-63A Lhedpsx D I Alofx Ah Sen

Condition: excellent (used), CV saws grinder Heller model SA315 Lhsdoxtbtcspfx Ah Sjn

Condition: ready for operation (used), Heller uni-Pro 24.000914 monitor with 20.003 / E 23 control card, used, in good condition, 100% functional, scope of delivery as per photos Lhedpjy Nrwaefx Ah Sjn

Condition: ready for operation (used), Heller PLT 90 uni-Pro CNC 90 control panel SN:00214 - without key, used, good condition, 100% working, scope of delivery as per photos Ledpfstyr Avsx Ah Sohn

Condition: ready for operation (used), Year of construction: 1999, travel distance X-axis: 630 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 630 mm, controller manufacturer: SIEMENS, controller model: 840C, spindle speed (max.): 8,000 rpm, number of slots in tool magazine: 40, number of axes: 4, This 4-axis HELLER MC 16 was manufactured in 1999. It features a maximum spindle speed of 8000 rpm and is equipped with a tool magazine that holds 40 tools. The machine also includes a twin pallet system for enhanced productivity. If you are looking to get high-quality machining capabilities, consider the HELLER MC 16 horizontal machining centre we have for sale. Contact us for further details. Lhsdpfx Aoy H D Rmsh Ssn • Twin pallet (2-station pallet changer) Technical Specification Taper Size SK 40