Used Hermle Uwf 1202 H for sale (119)

Condition: like new (used), Year of construction: 2016, operating hours: 3,641 h, functionality: fully functional, travel distance X-axis: 850 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 500 mm, feed rate X-axis: 35 m/min, feed rate Y-axis: 35 m/min, feed rate Z-axis: 35 m/min, controller manufacturer: Heidenhain, controller model: TNC 640, workpiece weight (max.): 2,000 kg, table width: 700 mm, table length: 1,070 mm, table load: 2,000 kg, overall weight: 10,000 kg, spindle speed (max.): 18,000 rpm, operating hours of spindle: 3,641 h, spindle motor power: 20,000 W, spindle nose: HSK-A63, number of spindles: 1, number of slots in tool magazine: 38, Equipment: documentation/manual, This HERMLE C400 is in like-new condition and has seen very little use, with only 3641 spindle hours. The machine comes from a repair/prototype workshop and was primarily used to machine plastics and aluminum. The machine is located in our showroom and can be inspected while running! Crodpfxszyq Ebo Ab Dsg Additional options & accessories: - Air through the spindle. - Heidenhain TS460 measuring probe. - Electronic handwheel. - Approx. 20 HSK-A63 tool holders (in the tool changer). - Manual cabinet roof. - Preparation for mist extraction system. - Coolant gun. - Original HERMLE + Heidenhain documentation. Weight & dimensions: approx. 10,000 kg

Condition: good (used), Year of construction: 2010, 2010 Hermle C50 U MT Dynamic 5 Axis Vertical Machining Centre With Turning Capability & Dual Siemens 840D Controls Table Dimension Ø1,000mm (16 16mm H7 'T' Slots). Maximum Table Load 2,000kg (1,000kg Turning). Maximum Component Dimension Ø1,000 x 810mm High. Axis Travel 'X'=1,000mm, 'Y'=1,100mm, 'Z'=750mm , 'A'=+100°/-130°, 'C'=360°. Rapid Traverse 'X'60m/min, 'Y'=60m/min, 'Z'=65m/min. Maximum Spindle Speed 12,000rpm (56kW Motor). Maximum Turning Spindle Speed 500rpm. Spindle Taper HSK A100. 84 Position ATC (Additional ZM 42 Magazine). Maximum Tool Ø250mm, Maximum Tool Length 430mm, Maximum Tool Weight 30kg. Chip To Chip Tool Change Time 7s. S/No. 19871 (2010). Machine Hours 89,860.9 , Drive Hours = 74,916.2, Spindle Hours 10,585.7, Work Spindle Hours 566.0 (New Spindle Installed 2023). Crodpfx Abozt Nywe Deg With Knoll KF 400 Through Coolant Paper Filtration System, Knoll S-1 Chip Conveyor, Swarf Bin, Handte Mist Extraction Unit, Hyfra Pedia VWK70-DE-S Chiller Unit, Brand New Blum Laser Toolsetter, Quantity Of Tooling In ATC, Renishaw MP40-2 Spindle Probe, Visiport TK2 Spin Window, Blum Reference Tool In Carry Case, Heidenhain Calibration Kit In Carry Case, Automatic Doors, Retractable roof For Loading & Technical Manuals. Weight 21,500kg. Technical Agreement/Specifications Are Located In A Folder Inside Control Panel. Machine Is A Clean & Very Good Condition, Only Issues Are Internal Lights Not Working (No Faults As They Were Repaired Last Month Through Kingsbury). We Run Fusion 360 Through The Machine.

Year of construction: 1997, condition: used, x-travel 600 mm y-travel 400 mm z-travel 420 mm Csdpfx Abjlp U Akj Derg Control Heidenhain TNC 407 quill stroke 75 mm table surface area 900x458 mm Tool bore SK 40 DIN 2080 oder DIN 6 turning speed range - stepless 20-4500 U/min transmission ratio 3 feed stepless 1-5000 mm/min rapid motion -longitudinal/cross/vertical 7-7-6 m/min total power requirement 13 kW weight of the machine ca. 2,5 t dimensions of the machine ca. 4x3,8x2,0 m

Condition: ready for operation (used), x-travel 510 mm y-travel 450 mm z-travel 410 mm taper in main spindle MAS BT 45° (SK40) table surface area 800 x 395 mm T-slots 6 Stk. turning speeds 50 - 2500 U/min feed stepless 4-1600/4-1000 mm/min voltage 400 V total power requirement 5.0 kW weight of the machine ca. 1400 kg range L-W-H 2300 x 2300 x 1800 mm Credpfoxaam Uox Ab Dsg from a training workshop maintained condition (!!) - in checked conditions - machinevideo - ?v=iSTVEdv2fO8 Furnishing : - robust universal milling machine - swiveling control panel, right front - rotatable universal milling head (re/li = 90°) * with hydraulic tool clamping - manual milling spindle feed, with locking - swiveling milling spindle protection - Stable T-slot clamping/angle table - Axis feeds with rapid traverse - Central lubrication unit - Control cabinet, installed on the left * Digital display - without function

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, Hermle U1130 5-Axis Cedpfx Abezych Ue Dsrg Very good condition! Available immediately! Operating hours: 35,500 h spindle hours total: only 11,000 h Maintenance measures in 2018: machine rebuild, drive, spindle: for €30,000 Travel: X-1130 mm, Y-720 mm, Z-630 mm table size: 1300 x 720 mm max. table load: 700 kg NC rotary table: 800 mm diameter, 20 rpm B-axis: Control: Heidenhain iTNC530 Spindle speed: 20-18,000 rpm Spindle mount: SK40 tool magazine: 28 seats Internal coolant supply (IKZ): 40 bar Spindle cooling device: Yes probe: 3-D Heidenhain B-axis: Control: Heidenhain iTNC530 Spindle speed: 20-18,000 rpm Spindle mount: SK40 tool magazine: 28 seats Internal coolant supply (IKZ): 40 bar Spindle cooling device: Yes probe: 3-D Heidenhain

Condition: ready for operation (used), A CNC universal tool milling machine Hermle is available. Travel X/Y/Z: 700mm/550mm/500mm, table dimensions X/Y: 1000mm/500mm, quill stroke: 100mm, tool holder: SK40, spindle speed: 3150rpm, feed rate: 2m/min, rapid traverse: 5m/min, max. workpiece weight: 400kg. Machine dimensions X/Y/Z: approx. 3900mm/3300mm/2100mm, weight: approx. 3300kg, control: Heidenhain TNC 150. An on-site inspection is possible. Codpfsxwcu Ajx Ab Derg

Condition: used, Year of construction: 1992, Technical details: x-travel: 600 mm y-travel: 400 mm z-travel: 420 mm spindle taper ISO: SK 40 control: Heidenhain TNC 360 quill stroke vertical: 75 mm Crodpou Nc U Ijfx Ab Dsg turning speed range: 20 ... 4000 U/min spindle head swivable left - right: 90° links / rechts ° feed:: X/Y/Z: 1...6000 mm/min. feed:: X/Y: 7 m/min. + Z: 6 m/min. Table dimensions: 900 x 460 mm table load capacity: 400 kg weight approx.: 2300 kg dimension machine xH: 4,0 x 3,8 x 2,0 m total power requirement: 13 kW Equipment: - separated production cell - coolant system - control panel with swivel-mounted boom - measuring probe SK 40 Heidenhain TS 120 - oil collecting basin *

Year of construction: 1989, condition: used, control: Heidenhain TNC 355 table size: 900 x 465 mm travel: X-600 mm, Y-400 mm, Z-420 mm tool taper: SK 40 quill stroke: 75 mm spindle speed: 20–4000 rpm feed: 1-5000 mm/min Crodpehd Rm Uefx Ab Dsg

Condition: ready for operation (used), Year of construction: 2015, operating hours: 45,092 h, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 750 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, table load: 2,000 kg, overall weight: 21,500 kg, spindle speed (max.): 18,000 rpm, spindle motor power: 35,000 W, number of slots in tool magazine: 60, number of axes: 5, This 5-axis HERMLE C 52 U was manufactured in 2015. It features an impressive X-axis travel of 1000 mm, Y-axis travel of 1100 mm, and Z-axis travel of 750 mm. The machine is equipped with a spindle speed of 18000 rpm and a table load capacity of 2000 kg. If you are looking to get high-quality machining capabilities, consider the HERMLE C 52 U vertical machining centre we have for sale. Contact us for further details. - Main Drive Power (100%/20% ED): 17.5 / 35 kW- Torque (100%/20% ED): 108 / 215 Nm- Table Clamping Surface: Ø 1150 x 900 mm- Swivel Range: +100° to -130°- Tool Places in Internal Magazine: 60- Tool Places in Additional Magazine (ZM135): 135- Max. Tool Diameter: 95 mm (160 mm with free adjacent spots)- Max. Tool Length: 500 mm- Max. Tool Weight: 15 kg- Internal Coolant Supply: 80 bar- Coolant Tank Capacity: 1500 l- Voltage: 400 V / 50 Hz- Nominal Current: 100 A- Power Consumption: 68 kVA (Max 71 kVA)- Additional Equipment: Paper band filter, chip conveyor, blow-off device, glass safety windows with rotating clear view window, Heidenhain electrical thermal compensation, Heidenhain HR handwheel module, BLUM tool breakage/measurement A2, chip flushing gun, emulsion mist extraction, m&h 25.50 HSK-A63 infrared touch probe, DCM collision monitoring Technical Specification Taper Size HSK 63 Cjdpfx Aezw N Hfob Derg

Condition: excellent (used), Year of construction: 2018, HS Flex 20 station pallet loader. XYZ: 600 x 550 x 330mm, Maximum workpiece diameter 450mm, maximum workpiece height 355mm, Maximum table load 300Kg, Credpfxjzghngj Ab Djg A axis -/+ 115 degrees, spindle taper HSK 63, spindle speed 15,000rpm, 30 station tool changer, Heidenhain TNC 640 control, with swarf conveyor , and high pressure coolant.

Condition: like new (used), Year of construction: 2015, operating hours: 9,925 h, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 750 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 55 m/min, controller manufacturer: Heidenhain, controller model: TNC 640, table width: 900 mm, table length: 1,150 mm, table load: 2,000 kg, overall weight: 22,000 kg, spindle speed (max.): 18,000 rpm, operating hours of spindle: 9,925 h, coolant supply: 80 bar, tool length: 500 mm, tool diameter: 160 mm, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, For sale: Top-maintained 5-axis simultaneous universal machining center Hermle C52U with a new spindle (replaced in 03/2025) and only 400 hours of operation since replacement! Year of manufacture: 2015 Control unit: Heidenhain TNC 640 Travel paths: X: 1000 mm Y: 1100 mm Z: 750 mm A: +100°/-130° C: 360° Table load: 2000 kg Clamping surface: 1150 mm x 900 mm Equipment: - Heidenhain TNC 640 control - AVD active vibration damping Csdpfx Abeygx Hne Derg - ACC active chatter suppression - AFC adaptive feed control - Heavy-duty machining (HDM) - Spindle speed: 18,000 rpm - Spindle interface: HSK-A63 - 60 tool positions - 9-way rotary union - Scraper belt conveyor - A3 Blum tool breakage/tool measurement - 3D touch probe Heidenhain - Electronic thermal compensation - ICS 80 bar with paper band filter - External air blast - Internal air blast - Electronic hand wheel - Hardware kinematic option - Manual cabin door - Automatic cabin roof - Chip rinsing gun ...and much more. The machine is available immediately! The machine is in excellent condition with no defects! All services performed by Hermle! Spindle replacement also carried out by Hermle! Invoice and test protocol available!

Condition: ready for operation (used), Year of construction: 1996, functionality: fully functional, travel distance X-axis: 400 mm, travel distance Y-axis: 330 mm, travel distance Z-axis: 350 mm, overall weight: 2,300 kg, input voltage: 380 V, Equipment: documentation/manual, We can offer you, without obligation, ex warehouse, subject to errors and prior sale: H E R M L E CNC-controlled universal tool milling machine with 4th axis Type UWF 600 CNC (HDH TNC 425) Year of construction 1995, new LCD monitor, 1 year old Table travels: longitudinal X 400 mm Vertical Z 350 mm Milling slide travel, transverse Y 330 mm Table size 630 x 335 mm Spindle mounting SK 40 Spindle speeds in 3 stages, vertical/horizontal 40 – 6,000 rpm Arbor stroke, vertical 63 mm Feeds, stepless 1 – 2,000 mm/min Feed force 4,800 N Rapid traverse 5,000 mm/min Spindle drive 3.5 kW Total drive 6.3 kW - 380 V - 50 Hz Weight 2,000 kg Accessories / Special equipment Automatic tool changer • HEIDENHAIN 4-axis control system Type TNC 425 with graphics and various subprograms, mobile electric handwheel Vise, 2 tons clamping force • Vertical head can be easily swiveled away for using the horizontal spindle • Hydraulic tool clamping in V-spindle, 5 different collets, • Separate control cabinet, separate coolant system, • Central lubrication, ammeter, etc. Crsdpfsztl H Tex Ab Dog Machine comes from a training workshop, from 1995 to 2014, has been in our possession since then and has been used very little. Table with tool spindles is included. Condition: good – ready for demonstration, monitor of the HDH control system has been replaced. Delivery: immediately, machine is already on a pallet, ready for transport, but can be demonstrated at any time. 12-ton forklift truck available.

Condition: excellent (used), Year of construction: 2012, operating hours: 6,000 h, functionality: fully functional, machine/vehicle number: 21534, travel distance X-axis: 850 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 500 mm, workpiece weight (max.): 2,000 kg, table width: 700 mm, table length: 1,070 mm, overall weight: 12,500 kg, spindle speed (max.): 18,000 rpm, operating hours of spindle: 5,000 h, spindle motor power: 15,000 W, number of slots in tool magazine: 38, Equipment: chip conveyor, documentation/manual, Very good condition, used for light milling. High-pressure coolant flush through the center of the tool, 80 bar. HSK63A tool holder. Blum tool breakage detection. iTNC530 control system. Includes two vices and a pneumatic clamping device ITS100/P. Crsdpfx Abjzw Rl Aj Deg Direct sale to end-user only. Price includes loading at the seller's location: W-Technology s.r.o. Polní 8 79201 Bruntál Czech Republic

Condition: used, machine/vehicle number: 2880, x-travel:290 mm y-travel:120 mm z-travel:350 mm table surface area:690 x 175 mm spindle taper:SK40 Credpfx Abecxxntj Djg turning speeds steps:17 feed range:42 - 680 mm/min feed steps:14 turning speed range:50 - 2240 U/min weight of the machine ca.:0,6 t with swivelling vertical head +/- 90°, double-pole switchable, reversing spindle drive, vernier hand wheels on all 3 axes plus fast-adjustment on x-axis with capstan, x-axis with electric feed, feed steps adjustment via change gear, upper rail for horizontal milling, triple cam switch on x-axis for running programs, emergency cut-offs on control panel and main switch

Condition: excellent (used), Year of construction: 2021, X-axis: 850 mm Y-axis: 700 mm Z-axis: 500 mm A-axis: +31 to -139 degrees Crjdpezyu N Rofx Ab Djg C-axis: 360 degrees Rotary table diameter: 650 x 540 mm Tool interface: HSK-A63 Tool changer: 88 positions Spindle speed: 18,000 rpm Control system: Heidenhain TNC 640 Includes: coolant system 40 bar Includes: compressed air through the spindle center Includes: Heidenhain measuring probe Includes: BLUM LC 50 Type 200 tool measurement / tool breakage detection Includes: BLUM LC 50 DIALOG technology Includes: Rotoclear Includes: Documentation

Condition: ready for operation (used), Year of construction: 2000, operating hours: 85,542 h, travel distance X-axis: 600 mm, controller manufacturer: HEIDENHAIN, overall weight: 6,500 kg, spindle speed (max.): 16,000 rpm, number of axes: 5, This 5-axis HERMLE C 600 U was manufactured in 2000. It has a net weight of 6500 kg and includes a Knoll unit with internal cooling. If you are looking to get high-quality machining capabilities, consider the HERMLE C 600 U vertical machining centre we have for sale. Contact us for further details. - Spindle Operating Hours: 31,764 h- Internal Coolant Supply (IKZ) Pressure: 20 bar- Tool Taper: SK40- Operating Voltage: 400 V / 3-phase- Frequency: 50 Hz- Control Voltage: 24 V- Nominal Current: 63 A- Total Connected Load: 42 kVA- The folding roof needs replacement. Additional Equipment included: Knoll internal cooling system, approx. 200–300 pieces of various shrink-fit chucks (long & short), mandrels, collets, drill chucks Technical Specification Taper Size SK 40 Codszyr Rlopfx Ab Dorg

Condition: used, Year of construction: 1999, x-travel 630 (875) mm y-travel 500 mm z-travel 500 mm Control Heidenhain TNC 430 Crsdpfx Abezh N T He Deg turning speeds 20-7.000 U/min feed 0-15.000 mm/min tool change unit 16-fach rapid power traverse in X-and Z direction 15 m/min tool taper SK 40 table surface area 900 x 528 mm max. table load 400 kg spindle diameter in front bearing 55 mm swivellable 0-90 ° quill stroke 75 mm spindle hours 9.546 h total power requirement 12/7,5 kW weight of the machine ca. 4,8 t dimensions of the machine ca. 4 x 3,6 x 2,2 m HERMLE U 630T 3-axis machining centre, built in 1999 The X-axis, with a stroke of 630 mm, can be extended to 875 mm by swivelling the tool changer out of the way. Accessories: Tool holders, see pictures

Condition: ready for operation (used), machine/vehicle number: 5722, table mounting size: 190 x 710 mm table movement x: 390/360 mm table movement y: 150 mm table movement z: 280 mm Cedpfx Ajflrg Tjb Derg spindle taper: SK 40 spindle turning speed range: 100 - 3100 rpm carriages longitudinal: 0 - 600 mm/min electrical connection: 380 V, ca. 1,5 kW space needed: 1400 x 1200 x 1500 mm weight: ca. 680 kg

Condition: ready for operation (used), Year of construction: 2017, operating hours: 27,660 h, spindle speed (max.): 18,000 rpm, overall weight: 10,500 kg, travel distance X-axis: 650 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 500 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 640, spindle motor power: 20,000 W, table load: 1,000 kg, number of slots in tool magazine: 36, number of axes: 5, This 5-axis HERMLE C 32 U was manufactured in 2017. It features a maximum X-axis travel of 650 mm, Y-axis travel of 650 mm, and Z-axis travel of 500 mm. The machine is equipped with a spindle speed range of 20 - 18,000 rpm and a tool magazine capacity of 36 positions. If you are looking to get high-quality machining capabilities, consider the HERMLE C 32 U universal machining centre we have for sale. Contact us for further details. - Spindle Power (100%/20% ED): 10 / 20 kW- Spindle Torque (100%/20% ED): 87 / 180 Nm- Swivel Rotary Table Diameter: 650 x 540 mm- Swivel Range (A-Axis): +/- 130°- Swivel Range (C-Axis): 360°- Tool Magazine Capacity: 36 positions (standard) + 50 positions (additional magazine)- Rapid Traverse (X-Y-Z): 45 - 45 - 40 m/min- Max Acceleration: 6 m/s²- Internal Coolant Supply: 80 bar- Coolant Tank Capacity: Main tank 100 L, IKZ tank 1100 L- Power Consumption: 37 kVA (Nominal: 45 kVA)- Supply Voltage: 400 V / 3PH / 50 Hz- Nominal Current: 60 A- Control Voltage: 24 V DC Cedozxdrxjpfx Ab Djrg Technical Specification Taper Size HSK 63

Condition: excellent (used), Year of construction: 2015, operating hours: 12,500 h, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 550 mm, spindle speed (max.): 18,000 rpm, overall weight: 12,500 kg, We offer in perfect condition Hermle C42U Dynamic with Heidenhain 640 control. Machine has 12.000 spindle hours. X-Axis travel: 800 mm Y-Axis travel: 800 mm Credpfezpfg Esx Ab Dsg Z-Axis travel: 550 mm Dynamic package torque axis, table Ø440 with secondary claming plates 920 x 490 mm Spindle: HSK-A63 18.000 RPM Machine will be in stock in 2 weeks

Condition: ready for operation (used), Year of construction: 1997, operating hours: 13,465 h, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 400 mm, table load: 1,000 kg, controller model: Heidenhain iTNC 430, TECHNICAL DETAILS Travel range, X-axis: 600 mm Travel range, Y-axis: 450 mm Travel range, Z-axis: 400 mm Table load: max. 1,000 kg Tool holder: SK 40 MACHINE DETAILS Control system: Heidenhain iTNC 430 Operating voltage: 400 V Control voltage: 24 V Machine weight: approx. 6,000 kg Operating hours: 48,690 h Spindle hours: 13,465 h EQUIPMENT Tool holders SK 40 Documentation Crodpjzwmx Sofx Ab Djg Heidenhain programming manual Machine vise Clamping jaws

Year of construction: 1969, condition: used, machine/vehicle number: 304, Manufacturer: Hermle Model: FW 800 Machine No.: 304 Year of Manufacture: 1969 Weight: approx. 1000 kg Crsdpfx Ajdgrwdob Dog General / Technical Data: Well-maintained, used horizontal milling machine with hydraulic program control (cam control strip) for automatic production processes. Arbor: SK 30 Travel distances: X 400mm Y 370mm Z 165mm Spindle speeds: 18 speeds, mechanically switched in 2 motor stages 85, 120, 145, 180, 205, 280, 300, 400, 470, 590, 680, 840, 100, 1210, 1420, 1780, 2030, and 3050 rpm Feeds: in the X and Y axes, stepless hydraulic; in Z (horizontal milling spindle) manual Table dimensions (fixed table): 800mm x 220mm Power supply / spindle motor power: 380V 50 Hz / 1.5 kW Approx. machine footprint: 1900mm x 1100mm x 1700mm (l x w x h) Accessories / Special equipment: - Fixed milling table - Assorted tool holders - Chip tray - Coolant system - Machine documentation with programming instructions Remarks The machine is in very good condition for its age. The machine is designed primarily for production use in small and medium series. The machine has a simple, cam-switch-controlled hydraulic program control.

Condition: ready for operation (used), Year of construction: 2001, operating hours: 13,572 h, travel distance X-axis: 630 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 426, table width: 528 mm, table length: 900 mm, table load: 400 kg, overall weight: 4,800 kg, spindle speed (max.): 7,000 rpm, number of slots in tool magazine: 40, number of axes: 3, This 3-axis HERMLE U 630 T was manufactured in 2001. It features an X-axis travel of 630 mm, Y-axis travel of 500 mm, and Z-axis travel of 500 mm. The machine includes a table size of 900 x 528 mm and a maximum table load of 400 kg. If you are looking to get high-quality machining capabilities, consider the HERMLE U 630 T vertical machining centre we have for sale. Contact us for further details. • Table dimensions: 900 x 528 mm • Tool changer capacity: 16 stations • Working hours (from display): • Control on (Steuerung ein): 68,311 h • Machine on (Maschine ein): 65,234 h • Program run (Programmlauf): 13,572 h Crsdpfxey H Irbj Ab Dsg Technical Specification Taper Size ISO 40

Condition: used, Year of construction: 2002, operating hours: 138,929 h, functionality: fully functional, machine/vehicle number: 15233, feed length X-axis: 900 mm, feed length Y-axis: 630 mm, feed length Z-axis: 500 mm, travel distance X-axis: 900 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 500 mm, spindle speed (max.): 16,000 rpm, spindle speed (min.): 20 rpm, rapid traverse X-axis: 35 m/min, rapid traverse Y-axis: 35 m/min, rapid traverse Z-axis: 35 m/min, table width: 465 mm, table length: 800 mm, type of input current: three-phase, rotational speed (max.): 16,000 rpm, rotational speed (min.): 20 rpm, table load: 1,000 kg, overall weight: 6,000 kg, input voltage: 400 V, controller manufacturer: Heidenhain, controller model: iTNC 530, torque: 16,000 Nm, workpiece length (max.): 3,177 mm, workpiece width (max.): 2,490 mm, workpiece height (max.): 2,750 mm, spindle motor power: 15,000 W, nominal power (apparent): 30 kVA, number of spindles: 1, spindle nose: SK 40, tool diameter: 80 mm, tool length: 250 mm, tool weight: 6,000 g, operating hours of spindle: 30,484 h, number of slots in tool magazine: 30, Equipment: documentation/manual, rotational speed infinitely variable, We are offering this used HERMLE C 600 V, manufactured in 2002, for sale. Manufacturer: HERMLE Model: C 600 V Credpozldknjfx Ab Deg Year of manufacture: 2002 Condition: used If you have any questions or require further information, please do not hesitate to contact us.

Condition: used, Year of construction: 1998, functionality: fully functional, Equipment: chip conveyor, documentation/manual, Hermle 3-Axis Machining Center Type C 600 V Year 1998 Cedpfxszxpp As Ab Djrg CNC Heidenhain TNC