Used High Frequency Press for sale (34,757)

Condition: as good as new (ex-display), Year of construction: 2025, High-pressure cleaner, high-pressure flushing unit, high-pressure built-in unit on hot-dip galvanized and painted high-quality steel frame with forklift tines, suitable for installation in service vehicles. PTC Moses 60/200, 75/150, 30/300, 75/210XL, 84/190XL, 102/150XL and 50/300XL – similar to, but not Feierabend & Fock, Karo, Leistikow, Müller, Rioned, Rockstroh, Rom, Rowo,... The following models are available: Moses 60/200 | 60 l/min. at 200 bar | Engine: Yanmar 3TNV88C 27.5 kW Stage V Moses 75/150 | 75 l/min. at 150 bar | Engine: Yanmar 3TNV88C 27.5 kW Stage V Moses 30/300 | 30 l/min. at 300 bar | Engine: Yanmar 3TNV88C 27.5 kW Stage V Moses XL 75/210 | 75 l/min. at 210 bar | Engine: Yanmar 4TNV88C 35.5 kW Stage V Moses XL 84/190 | 80 l/min. at 190 bar | Engine: Yanmar 4TNV88C 35.5 kW Stage V Moses XL 102/150 | 102 l/min. at 150 bar | Engine: Yanmar 4TNV88C 35.5 kW Stage V Moses XL 50/300 | 50 l/min. at 300 bar | Engine: Yanmar 4TNV88C 35.5 kW Stage V DIMENSIONS / WEIGHT: Dimensions of models with 27.5 kW without water tank LxWxH: approx. 910x1,220x1,200 mm Dimensions of models with 35.5 kW without water tank LxWxH: approx. 1,240x1,310x1,300 mm Empty weight without water tank: approx. 550-700 kg HIGH-PRESSURE PUMP: - Manufacturer: HPP - Model: CLW for standard models and ELS for XL models - Flow rate: max. 102 l/min. - Operating pressure: max. 300 bar ENGINE: - Manufacturer: Yanmar - Model: 3TNV88C and 4TNV88C - Fuel: Diesel - Cooling: Water - Cylinders: 3 and 4 - Max. power: 37-48 hp (27.5-35.5 kW) - Max. engine speed: 3,600 rpm TRANSMISSION: Pulley and belt CONTROL PANEL: - Start button - Hour meter - Electronic fuel gauge - LED indicator for oil temperature - LED indicator for low lubricating oil pressure - LED indicator for clogged air filter - LED indicator for speed measurement - LED indicator for generator - LED indicator for spark plugs - Emergency stop button ELECTRICAL CONTROL: - Winding/unwinding of hydraulic hose reel; - On/off bypass; - Speed control +/-; - Emergency stop button; - Switching to remote control; INSTALLED ALARM: - Low water level protection against dry running of the high-pressure pump with automatic shut-off function. SAFETY AND PRESSURE REGULATING VALVES: - The unit is equipped with a safety valve, a pressure regulating valve and a pressure gauge. HIGH-PRESSURE HOSE REEL: - Type: hydraulically operated hose reel, swiveling by 180° - Material: Stainless steel - Capacity: max. 100 m ½“ - Hose: 80 m ½“ high-pressure hose (included) - Hose guidance: manual WATER SUPPLY HOSE REEL: - Type: manual - Material: Stainless steel - Capacity: max. 35 m ¾“ low-pressure hose Gkjdpfx Aljf Ar Exj Sjc - Hose: 35 m ¾“ low-pressure hose (included) FUEL/OIL TANK: - Fuel: approx. 13 l - Oil: approx. 13 l INCLUDED IN DELIVERY: - Multifunction remote control IMET; - On / Off engine; - On / Off bypass; - Speed control +/-; - Winding / unwinding of hydraulic hose reel; - Emergency stop button; - Battery charger for remote control; - 500, 800 or 1000 l water tank;

Condition: used, Year of construction: 1985, Technical details: Punching capacity: 40 kN air pressure - required: 8 bar ram stroke - adjustable min/max: 6 - 50 mm Gedpfx Aju Icwgol Sskc ram adjustment: 50 mm no. of strokes: 70 - 400 Hub/min Table dimensions: LxB: 480 x 445 mm hole in table: LxB: 250 x 112 mm slowing-down time: 80 ms bei 450 U/min. clamping surface ram: LxB: 420 x 345 mm ram hole: Ø 40 x 230 mm voltage: 380 V control voltage: 220 V frequency: 50 Hz total power requirement: ca. 19 kVA (ca. 7,5 KW) weight of switch cabinet: 0,3 t machine weight ab.: 4000 kg 40t punching press without roll feed/conveyor belt system Operation via control panel / two-hand operation Operation: manual / automatic *

Year of construction: 2018, condition: excellent (used), machine/vehicle number: B8.01142.0395, Stationary high-pressure pump unit Hammelmann HDP 142 on a base frame. Similar to, but not a Kamat, Uraca, or Woma. Pump type: HDP 142 Operating pressure: 610 bar Flow rate: 78 l/min Gkjdpfx Alsh E Dgzs Soc Drive speed: 1500 rpm Drive power: 86 kW with AC M 280 M-4/HE electric motor, 90 kW, IP55, with pressure regulating valve, with safety valve, with oil cooling system. Dimensions L x W x H: approx. 1,700 x 850 x 1,450 mm Weight: approx. 1,200 kg Year of manufacture: 2018 Condition: after service by Hammelmann in October 2020, it has only been in operation for a few weeks and has been out of service for more than a year. In very good used condition.

Condition: good (used), Year of construction: 2009, machine/vehicle number: HD 10906347, pressure: 350 bar, overall weight: 850 kg, rotational speed (max.): 1,500 rpm, power: 35 kW (47.59 HP), Equipment: type plate available, Used high pressure pump. Technical specifications: Gedpetuqmkjfx Al Sjkc Year of manufacture: 2009 Type: RS716E/350 Serial number: HD 10906347 35 kW 350 bar 1500 1/min 47 l/min With Küenle KDGN 225S4 NV 400 / 690V 67.2 / 39A 50Hz 37kW 1475 1/min Condition: used (see pictures and nameplates) Scope of delivery: 1 pump

Condition: like new (used), High Pressure Pump Gksdpfx Asd Hniuol Soc 260 bar 60 ltr/min at 1500 rpm and 30kW (current configuration) 600 bar 60 ltr/min at 1500 rpm and 66kW 600 bar 90 ltr/min at 2200 rpm and 97kW

Condition: used, Year of construction: 1991, Type: WKF 50/12 N.SE Size: DN50 12 stages Standard version with mechanical seal Gsdpfx Aloy A Rbde Sokc Flow rate: 26.9 l/s (96.8 m³/h) Head: 380 m Speed: 2,960 rpm

Condition: good (used), water pressure: 1,500 bar, Aquablast DUO surface cleaner. Clean, demolish, and strip surfaces with high-pressure water. Gedpfx Aljv S Ep As Sskc Clean, strip, remove, demolish, and roughen The Aquablast offers numerous applications for every surface. Different results are achieved depending on the pressure and flow rate. Applications range from thorough surface cleaning to targeted removal of solids.

Condition: good (used), Technical data are shown on pictures. Gkodpfx Alsp N Aq Ho Ssc

Condition: reconditioned (used), Year of construction: 2017, operating hours: 1,651 h, functionality: fully functional, machine/vehicle number: G393, operating pressure: 500 bar, total length: 1,175 mm, total height: 945 mm, total width: 760 mm, pressure: 500 bar, type of input current: three-phase, empty load weight: 290 kg, input voltage: 400 V, power: 15 kW (20.39 HP), input current: 32 A, noise level: 78 dB, pressure (max.): 500 bar, input frequency: 50 Hz, water pressure: 500 bar, Dear Sir or Madam, For sale is an overhauled Falch WheelJet 15 Electric without accessories. 500 bar 15 l/min 32A plug Best regards, STS-Reinigungstechnik Team Gedpfxoxugife Al Sekc

Year of construction: 1995, condition: good (used), Stationary high-pressure pump unit URACA RS716E/400 on a base frame for all cleaning and pressure testing applications. Similar to, but not a Hammelmann, Woma, or Kamat. Operating pressure: 400 bar Flow rate: 56 l/min Drive speed: 1,475 RPM Drive power: 44 kW Gkjdpfefl Dwmex Al Soc with SIEMENS 45 kW 3-phase motor 1LA6 223-4AA60 225M IP 55 with URACA MSÜV 16/700 and PSV8/800 valves Dimensions L x W x H: approx. 1300x1100x1400 mm Weight: approx. 1,115 kg Year of manufacture: 1995 Condition: in good used condition.

Condition: excellent (used), functionality: fully functional, overall weight: 60 kg, total height: 175 mm, jaw width: 200 mm, total length: 615 mm, total width: 200 mm, jaw height: 60 mm, clamping width: 200 mm, clamping range: 435 mm, Equipment: type plate available, Allmatic-NC machine vice, high-pressure clamping device Type LC 200 Jaw width 200 mm Base body type LC 160/200 Base body width 164 mm Clamping force adjustable, max. 60 kN Level 0: direct Level 1: 15 kN Level 2: 30 kN Level 3: 45 kN Level 4: 60 kN Gkedpozfimujfx Al Soc Clamping range a: 0-250 mm Clamping range b: 189 – 435 mm Jaw height 60 mm Base body length 530 mm Overall length 615 mm Base body height 115 mm Weight 60 kg Used, in good condition.

Condition: used, Vertical multistage high-pressure centrifugal pump KSB Type Movichrom N CN 3/10 2R Serial no. 1-P30-837561 Nominal flow rate max. 3 m3/h Nominal delivery head 70 meters = 7 bar Gkodpfx Asrl U S Eol Sjc Nominal speed 2900 rpm Motor power 1.5 kW Mains connection 400 Volt, 50 Hz - Pump construction in 10 stages - Pump elements made of stainless steel, pump base made of cast iron - Connection flanges DN 32 - Suitable for drinking water supply, irrigation and drainage Space required for pump L x W x H 250 x 220 x 830 mm Weight 38 kg Unused replacement pump from stock, as good as new Not a submersible pump or submersible pump

Condition: used, NC High-Pressure Vice, High-Pressure Machine Vice RÖHM NC Precision Machine Vice Model RKD-125 ID No.: 180467 / D2948 Year of manufacture: approx. 2010 Jaw width (step jaws): 125 mm Jaw height (step jaws): 40 mm Jaw width (add-on jaws): 135 mm Jaw height (add-on jaws): 49 mm Machine vice body width: 126 mm Max. opening width: 141 mm per side (only with step jaws, without add-on jaws) Gedpfx Aoyy Dfdol Sokc Clamping force: 4 tons Guideway height: 105 mm - High-pressure vice with mechanical force amplifier - Clamping force adjustable in 4 steps from 1 to 4 tons - Two clamping modes: single clamping with dummy, double clamping - Various clamping ranges via 3 guide slots in each base jaw - Step jaws (reversible) - Robust machine body, ground on all sides - Can be mounted horizontally, vertically or laterally - Middle jaw dimensions (L x W x H): 125 x 40 x 40 mm - Add-on jaw dimensions (L x W x H): 135 x 20 x 49 mm Overall dimensions (L x W x H): 680 x 135 x 155 mm Weight: 56 kg Good condition

Condition: like new (used), Year of construction: 2026, operating hours: 40 h, functionality: fully functional, pressure: 2,500 bar, year of last overhaul: 2026, We are selling our IBAK MicroGator with a UHP high-pressure water cleaning system for main pipelines DN 200–DN 800. The robot was only used for one project and has not been used since. * Only 4 months old * Used for only 5 working days Gjdpfxsz Aupis Al Sskc * No signs of wear – like new * Equipped for Ultra High Pressure (600–2500 bar), compatible with Falch and Hammelmann * Original price: €66,000 * Our price: €50,000 (negotiable) The robot is currently located in the Czech Republic. However, after prior arrangement, it can also be made available in the Cham area in Bavaria. Filip Khol rohrsanierung1a.de

Condition: excellent (used), Year of construction: 2016, machine/vehicle number: B6.01122.2949, total width: 2,000 mm, total length: 850 mm, total height: 1,400 mm, pressure: 460 bar, operating pressure: 460 bar, type of input current: three-phase, overall weight: 1,698 kg, rotational speed (max.): 1,800 rpm, power: 0.089 kW (0.12 HP), Hammelmann HDP 122 stationary high-pressure pump unit on base frame. Similar but no Kamat, Uraca, Woma. Pump type: HDP 122 Operating pressure: 460 bar Delivery rate: 104 l/min. Drive speed: 1800 rpm. Drive power: 89 kW with ACM 315 S-4/PHE electric motor 110 kW, IP55 with pressure control valve, with safety valve, with oil cooling system. Dimensions LxWxH: approx. 2,000x850x1,140 mm Weight: approx. 1,698 kg Godpfx Alsqhnrhj Sokc Year of construction: 2016 Condition: In very good used condition. 2 pieces available.

Condition: good (used), 1 used high-pressure machine vise Manufacturer: Allmatic Type: 160 Technical specifications: Jaw width: 160 mm Clamping range I: 0 mm – 152 mm Clamping range II: 147 mm – 302 mm Clamping force: 60 kN Weight: 60 kg Base body height: 137 mm Gsdpfx Asw Sdxgol Sokc Jaw height: 50 mm Support height: −0.0585 mm L4: 613 mm – 915 mm 2 units available

Year of construction: 1989, condition: ready for operation (used), High pressure pump ABEL PC57.1S Article no.: RE-HU-2019-1102-P51e Machine: High pressure pump Type: ABEL PC57.1S Godpfx Asd Hiwiol Sokc Mach.-Nr.: 12042E9 Capacity: 18 m3/h Pressure: 100 bar Motor: 75 kW

Condition: good (used), Centrifugal pump, high-pressure pump, water pump, multi-stage vertical centrifugal pump -Drive: 1.5 kW 2910 rpm -Max. flow rate: 23.6 m³/h -Max. pressure: bar Maximum temperature: 100 °C Godpjdzryksfx Al Sjkc Quantity: 1 piece available -Dimensions: 250/300/H755 mm -Weight: 60 kg

Condition: used, Mechanical High-Pressure Machine Vice GRESSEL Type MHS 126-3 High-pressure clamping device Jaw width: 125 mm Jaw height: 40 mm Opening width: 221 mm Clamping force: 2 / 3 / 4 tons Guideway height: 62 mm - Clamping force adjustable in 3 stages - High-pressure vice with mechanical power amplifier - Clamping range adjustable in 2 stages - Lateral thread for workpiece stop Gkjdpfxoxlkvde Al Ssc Dimensions: 440 x 140 x 102 mm Weight: 26 kg

Condition: new, Year of construction: 2024, pressure 75 t stroke 8-80 mm no. of strokes 80-200 Hub/min ram - range of adjustment 70 mm Gsdjvfxl Rjpfx Al Sskc table surface area 900x600 mm ram surface 900x470 mm hole in the table 450x180 mm dist. between columns - front to rear 500x350 mm dist. between pillars (front to rear) 788 mm total power requirement 10 kW weight of the machine ca. 10 t dimensions of the machine ca. BxTxH 1600x1200x2800 mm

Condition: good (used), machine/vehicle number: Blinie, BSTA 30 Number of strokes 600 spm Feed BBV 120/60 Pressing force 30 T Maximum strip width 190 mm with CE certificate and warranty Machine rebuild Good condition Gkedpfedguhcox Al Ssc More high speed presses on stock made by Bruderer models BSTA 18, 20, 30, 200, 50 and Schaal and Mabu presses

Year of construction: 2011, condition: excellent (used), machine/vehicle number: B1.01177.0824, Stationary high-pressure pump unit Hammelmann HDP 177, mounted on a base frame. Similar to, but not a Kamat, Uraca, or Woma. Pump type: HDP 177 Operating pressure: 300 bar Flow rate: 239 l/min Drive speed: 1500 rpm Drive power: 130 kW with VEM motor 132 kW, 3-phase motor, IP55, with pressure regulating valve, with safety valve, with oil cooling system. Dimensions L x W x H: approx. 2000 x 850 x 1400 mm Weight: approx. 1500 kg Gkjdpfx Aehtfynsl Soc Year of manufacture: 2011 Condition: in very good used condition.

Condition: new, Hello, I would like to offer high-pressure KSB pumps with ABB electric motors. Applications for the pumps: - Chemical industry - Fuel industry - Gas industry Gedpfxozx Upzj Al Sokc - Paper industry I have various models available: - 5 units: MCPK150-125-200 VX LXM - 5 units: MCPK065-040-200 VC EXM - 2 units: MCPK100-065-200 VC LXM - 2 units: MCPK080-050-315 VC EXM The stated price is for 1 complete pump with motor, model MCPK150-125-200 VX LXM. If you are interested in a different pump model, please contact me.

Year of construction: 2000, condition: excellent (used), Atlas Copco Crepelle High-Pressure Compressor Type: D44 Year of manufacture: 2000 Operating pressure: 40 bar Power: 220 kW Speed: 839 RPM Gjdpfx Alef Hly Sj Sskc The compressor can be inspected at any time.

Condition: used, Year of construction: 2021, operating hours: 1,231 h, functionality: fully functional, total width: 720 mm, total length: 950 mm, total height: 800 mm, pressure: 500 bar, operating pressure: 450 bar, type of input current: three-phase, overall weight: 175 kg, high-pressure hose length: 20,000 mm, volume flow: 0.96 m³/h, empty load weight: 175 kg, input voltage: 400 V, hose length: 20,000 mm, High-pressure washer/sandblaster DENJET CE 20 COMPACT 500 - Pressure: 500 bar - Flow rate: 16 l/min - Power supply: 15 kW - Voltage: 400 V - Current: 28 A Gkedpfx Aeyak Tyel Sjc - 20 m wear-resistant high-pressure hose with ½” BSPP female swivel couplings (extension hose). - 15 m oil-resistant 4-core electric cable. - Dry shut-off trigger gun with 0.85 m stainless steel lance. - Straight jet nozzle - CEE electric plug. - Rotating nozzle. - Sandblasting kit with boron carbide nozzle. - Mobile abrasive container. - Personal protective equipment: helmet with eye protection, waterproof coverall, protective apron rated for up to 1000 bar, protective boots size 43.