Used High Pressure Washer Engine for sale (44,200)

Condition: new, Year of construction: 2026, functionality: fully functional, Mobile high-pressure waste container washers Autonomous container unit, independent from the chassis. Specifications: - Hydraulic lifting and lowering, - Washes either two small containers (120–240 L) or one large container (1100 L), - Two washing nozzles, - Programmable washing cycles, - Honda engine or equivalent, - Power generator Low operating costs: - 3.5 t permissible gross vehicle weight for the chassis, Todpfx Abowmln Toujd - Only a few liters of petrol for an entire working day, - Water recycling system (average 800–1000 liters per day), - Up to 100–150 containers (120–240 L) cleaned per day, - Biodegradable cleaning and disinfecting agents (EU-certified). Versatile applications: - The unit can be removed from the truck bed and used separately (especially important during winter). Additional options: - Cleaning of construction machinery, gardens, parks, playgrounds, kindergartens, schools, offices, traffic signs, facades, parking lots, and much more. - Hot water function. - Power sockets (mobile generator) for your electric tools. - Quick couplings for an additional water tank. More photos and videos available on request.

Condition: good (used), DHI PPCH-G High Pressure Gas Controller/Calibrator 100MPa / 15,000psi With Carry Case Tjdpj Ad D Nljfx Abujd Pressure control to 100MPa (15,000 psi). AutoRange feature. One of two Q-RPT’s in each controller with 10:1 turndown. Supports external reference pressure transducers. FLASH memory for simple and free embedded software upgrades.

Condition: good (used), Year of construction: 2017, Gasoline-powered high-pressure cleaner with a tubular frame. Extremely robust. Ideal for construction sites where there is no electricity yet. 100% ready for use. High-quality Honda engine. High-pressure hose and spray unit in excellent condition. Shipping within Germany is possible. Transport costs are approximately €110 plus VAT. The device can be inspected and tested on-site at any time. Technical data: Pressure: 150 bar Flow rate: 650 liters/hour Tjdpjk Dz R Tsfx Abued Weight: 39.5 kg Further information in the attached data sheet.

Condition: used, Year of construction: 2019, operating hours: 3,420 h, functionality: fully functional, machine/vehicle number: W09FAL226KMF14072, operating pressure: 500 bar, total length: 2,700 mm, total height: 2,100 mm, total width: 2,100 mm, pressure: 500 bar, empty load weight: 2,600 kg, input voltage: 12 V, fuel: diesel, heating capacity: 198 kW (269.20 HP), overall weight: 2,600 kg, water tank capacity: 400 l, fuel tank capacity: 220 l, temperature: 100 °C, volume flow: 1.8 m³/h, noise level: 100 dB, pressure (max.): 500 bar, Falch Trail jet 30 500-30-95-d high-pressure cleaner, year of construction 2019. The machine runs at a pressure of 100 - 500 bar and a temperature of 10⁰c - 100⁰c. Its has a remote control feature to remotely control temp, pressure and on and off. Also it comes with the front storage box. The machine has been fully serviced and maintained by falch. It has been well looked after with one owner from new. Tedpfxsy Sazfe Abusd Manufacturer: Falch Model: Trail jet 30 500-30-95-d Construction year: 2019 Serial number: G57200378 EU type number: e1*2007/46*0386*01 Identification number: W09FAL226KMF14072 Weight: 2600 kg Vertical load: 120 kg Axle 1 load: 1300 kg Axle 2 load: 1300 kg If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: ready for operation (used), Year of construction: 2009, operating hours: 1,909 h, functionality: fully functional, machine/vehicle number: 08241380, fuel: diesel, DynaJet 500 High-Pressure Cleaner We are offering for sale a professional DynaJet 500 high-pressure washer with a diesel engine and water heating system. Technical Specifications: • Type: DynaJet 500 • Model: DY Boiler • Fuel: diesel • Power supply: 12 V • Maximum operating pressure: 500 bar • Maximum system pressure: 600 bar • Maximum flow rate: 28 l/min • Maximum temperature at high flow rate: 80 °C at 28 l/min • Maximum temperature at low flow rate: 150 °C at 8 l/min • Power: 115 kW • Year of manufacture: 2009 Machine application: This professional high-pressure cleaner is particularly suitable for: • cleaning industrial equipment and machinery, • removing dirt, grease, and deposits, • cleaning construction and agricultural equipment, • cleaning production and operational areas, Todpfxjzuafto Abuod • demanding industrial and maintenance cleaning. Machine condition: • The machine is complete, • functional and operational, • diesel system with heating, • high-pressure design up to 500 bar, • the machine is equipped with a chassis for easy handling, • sold as a fully functional unit. The machine is suitable for companies seeking high-performance professional equipment for high-pressure cleaning in industry, construction, agriculture, or service operations.

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. Tedpfsfz A D Nsx Abued ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel • Phases changed manually or automatically - temporarily Tsdpfx Absfzrapjuod • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Condition: excellent (used), Year of construction: 2016, operating hours: 20 h, functionality: fully functional, high-pressure hose length: 20 mm, pressure: 90 bar, fuel: diesel, overall weight: 600 kg, water tank capacity: 1,000 l, temperature: 90 °C, MGC.pl, a company operating since 1995 with over 6,000 completed transactions, offers for sale a professional Heatweed HighSeries 75/30 machine from 2016, designed for weed removal using hot water and surface cleaning. The offered set includes two working nozzles and additional tanks. The model is designed for simultaneous operation by two operators, making it ideal for servicing larger areas, in service companies, municipal plants, and companies involved in green space maintenance. TWO APPLICATIONS IN ONE MACHINE Heatweed uses hot water for thermal weed control, without the use of herbicides. This solution is particularly useful for maintaining sidewalks, squares, parks, cemeteries, and areas around buildings. The device can also operate as a pressure washer for cleaning facades, benches, trash cans, monuments, tombstones, and other infrastructure elements. Pressure and temperature regulation allows the operation to be adapted to the task at hand. TECHNICAL DATA OF THE MODEL Manufacturer: Heatweed. Model: High 75/30 / HighSeries 75/30. Year of the offered unit: 2016. Engine: Kubota, diesel. Possibility of simultaneous operation by two operators. Declared weeding performance: 3750–7500 m² per day, depending on working conditions. Water flow during weed control: 30 l/min. Working pressure during weeding: 0.1 bar. Water temperature during weeding: 99°C at weed level. Automatic temperature control with display. Accuracy of temperature regulation according to the manufacturer: ±0.4°C. Pressure in cleaning mode: stepless regulation up to 90 bar. Water temperature in cleaning mode: adjustable up to 85°C. Number of burners: 2. Fuel tank capacity (engine): 40 l. Fuel tank capacity (burners): 80 l. Standard water tank capacity: 1000 l. Standard working hoses: 2 × 15 m. Two integrated automatic hose reels. Dimensions of the machine itself, length × width × height: 1351 × 1001 × 1314 mm. Machine weight according to the data sheet: 585 kg. Dosing pump for descaling agent. Todpfoz H T A Tsx Abued Operation without the need to connect an external generator. Design allowing loading and unloading with a forklift. EQUIPMENT OF THE OFFERED SET Two working nozzles. Additional tanks. Detailed number and capacity of tanks and the composition of accessories to be confirmed during inspection. APPLICATION Weed removal from sidewalks, squares, and pedestrian paths. Maintenance of parks, gardens, and green areas. Maintenance of areas around schools, kindergartens, and playgrounds. Work in cemeteries and municipal areas. Service for housing estates, industrial facilities, and company premises. Washing facades and elements of small architecture. Cleaning monuments, tombstones, benches, and trash cans. Professional equipment for a company that wants to expand its offer with hot water weeding and cleaning services. The possibility of operating two operators and the combination of two functions increase the range of applications for the device. The stated price is net and applies to export and for companies. A significant discount is possible for individual customers. We invite you to contact us directly by phone so that you can get your best price.

Year of construction: 2019, condition: like new (used), TM Norway Automatic Gas Cylinder Filling Carousel 200/300 bar Todpo Ahhttofx Abuod For sale: professional, fully automatic gas cylinder filling carousel manufactured by TM Norway AS, Norway. Year: 2019 Project / Serial No.: PRJ-2018-02-13-0001 CE marked This system is designed for the automated handling, preparation, filling, and control of high-pressure gas cylinders. It is suitable for industrial gas producers, cylinder filling plants, technical gas suppliers, welding gas companies, specialty gas producers, and other professional gas filling facilities. Main features: * Fully automatic 8-station carousel concept * Cylinder sizes approx. 5-50 liters according to TM Norway platform specifications * Designed for 200 and 300 bar applications * Suitable for single gases and gas mixtures * Automatic cylinder positioning and handling * Automatic valve orientation and adapter connection, depending on the configuration * Residual-pressure measurement * Automatic blow-down * Vacuum preparation * Automatic gas filling * Final pressure measurement * Automatic valve closing * Leak testing * Automatic adapter disconnection * Industrial PLC/HMI control * Rexroth control equipment * Siemens SIMATIC mobile panel * TROAX safety guarding with interlocks and emergency stops Possible gas applications, depending on the installed gas supply, adapters, software, and certification: Oxygen (O2), Nitrogen (N2), Argon (Ar), Carbon Dioxide (CO2), Helium (He), welding gases, shielding gases, industrial gases, technical gases, specialty gases, and mixed gases. The TM Norway carousel platform can support different cylinder valve connections, including DS, BS, DIN, AFNOR, CGA, and VIPR/integrated valves, depending on the installed adapters. This is not a simple manual filling manifold. It is an automated industrial cylinder filling system intended to automate several operations normally performed manually in a gas filling plant. Ideal for: Industrial gas plants, gas bottling plants, cylinder filling centers, oxygen filling plants, nitrogen filling plants, argon filling plants, CO2 filling plants, welding gas producers, mixed-gas plants, and gas plant integrators. Used industrial machine. The installation is available for inspection. The exact gas configuration, adapters, software, operating pressure, scope of supply, and recommissioning requirements must be verified for the buyer's intended application. Detailed technical PDF available upon request. Keywords: automatic gas filling carousel, gas cylinder filling machine, cylinder filling system, gas bottling plant, high-pressure gas filling, 200 bar, 300 bar, oxygen filling, nitrogen filling, argon filling, CO2 filling, helium filling, mixed gas filling, welding gas filling, industrial gas equipment, cylinder filling automation, TM Norway gas filling system. Kosan Crisplant gas filling, Kosan gas filling carousel, Siraga filling carousel, Pamasol filling machine, Pamasol gas filling, Rotarex gas filling system, Cryostar gas equipment, Linde gas filling equipment, AGA gas filling system, Messer gas filling plant, Air Liquide gas filling equipment, Air Products gas filling equipment, gas filling carousel alternative, automated cylinder filling alternative, industrial gas carousel, automatic cylinder filling carousel, high-pressure gas carousel, gas bottle filling carousel, gas bottle filling machine, compressed gas bottling machine, industrial cylinder filling equipment.

Condition: reconditioned (used), functionality: fully functional, pressure: 200 bar, input voltage: 400 V, overall weight: 168 kg, temperature: 155 °C, Kärcher HDS 10/20-4M Hot Water Pressure Washer The unit comes with new accessories, including a German-made R+M spray gun, a stainless steel lance, a steel-reinforced hose, and a 25° power nozzle. Tjdpez E N Ensfx Abued A durable brass pump head with new ceramic pistons and seals ensures long-lasting, trouble-free operation. A highly efficient, low-speed three-phase motor ensures stable performance, even during prolonged use. With an operating pressure of 200 bar and a flow rate of 1000 l/h, the machine is effective for heavy-duty tasks in construction, industry, logistics, and agriculture. Each unit we offer features custom-taken photos; you are buying the exact machine shown. TECHNICAL DATA: Model: HDS 10/20-4M Supply voltage: 400 V ~ 3-phase Flow rate (l/h): 500 – 1000 Operating pressure (bar): 30 – 200 Max. Water heating temperature (°C): 80–155 Connected load (kW): 7.8 Fuel tank capacity (l): 25 Detergent tank capacity (l): 20 + 10 High-pressure hose length (m): 10 Weight (kg): 168 Dimensions (L x W x H mm): 1330 x 750 x 1060 EQUIPMENT: NEW heavy-duty spray gun from the German brand R+M NEW stainless steel spray lance NEW reinforced 10m high-pressure hose with steel braiding NEW 25° power nozzle Water filter and GEKA claw couplings – FREE KEY FEATURES: Open oil system – no operating time limits Two built-in detergent tanks allow cleaning fluid to be dispensed directly through the machine Highly legible and intuitive control panel Simple design and easy access to internal components make the machine user-friendly and easy to service RM110 water softener tank prevents corrosion and limescale buildup inside the heating coil and other lines. The exhaust gas temperature sensor shuts down the engine if the temperature exceeds 300°C. When the eco!efficiency function is activated, the unit heats the water to 60°C, enabling effective cleaning—even of heavy soiling—while reducing fuel consumption by approximately 20%.

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar. Tjdpfx Aofz Ax Sjbued

Condition: new, operating pressure: 275 bar, pressure: 275 bar, overall weight: 71 kg, PROFESSIONAL PETROL PRESSURE WASHER WITH BRASS PUMP – TECHKAR "G275" MODEL Operating parameters: 275 bar, 15 l/min Product Description: We offer a professional petrol-powered pressure washer featuring a robust yet compact design and large pneumatic tires, ensuring convenient, efficient, and safe transport to locations where standard electric washers cannot be used. Thanks to its petrol engine and a pump capable of self-priming water from tanks, this unit operates independently of mains electricity and water supplies. It is ideally suited for various outdoor tasks, such as work on allotment gardens. High performance specifications—specifically a maximum pressure of 275 bar and a flow rate of 15 l/min—enable it to handle the vast majority of tasks required of pressure washers. Utilizing standard fittings (M22 thread and standard petrol washer quick-connectors), the unit can be expanded with a wide range of accessories, including brushes, lances, turbo nozzles, sandblasting kits, sludge removers, and T-Racer surface cleaners. The brass pump, equipped with a pressure regulation valve and a safety valve, ensures exceptional durability even under heavy workloads. We are the direct importer of TECHKAR "G275" pressure washers and maintain a continuous stock of service parts (pressure valves, pistons, seals, by-pass valve repair kits) and accessories (such as T-Racer patio cleaners, rotary nozzles, hoses, foam cannons, etc.). When you choose our product, you benefit from comprehensive service and post-warranty support. About the LIFAN brand: Lifan is one of the world's largest automotive companies. The enterprise manufactures motorcycles, passenger cars, trucks, and buses, as well as internal combustion engines and machinery. Founded in 1992, the company is headquartered in Chongqing. It successfully sells its products in highly developed nations—such as the UK, Germany, Australia, the USA, and Canada—where it enjoys an excellent reputation. Set contents: LIFAN 15 HP combustion engine Brass pump head 15m steel-braided hose with 3/8" quick-connectors High-pressure gun with 3/8" quick-connector Spray lance with quick-connector 0° point-jet nozzle 15° fan-jet nozzle 40° fan-jet nozzle Chemical application nozzle Todpfx Absz Dv Tceusd Garden hose quick-connector with metal pre-filter Honda oil supply (2 x 0.6L) Features and benefits: Brass pump head Crankshaft pump, 3-piston design Ceramic plungers Robust intake and discharge valves Thermal safety valve Chemical intake valve with hose and filter Additional BY-PASS pressure regulation valve Water connection for standard garden hose coupling Cover with oil drain opening Cover with built-in oil level sight glass Large pneumatic wheels Sturdy frame Technical specifications: Engine: LIFAN 15 HP combustion engine Starting system: Manual (recoil) Fuel consumption: ≤ 374 g/kWh Fuel tank: 6.5L Fuel type: Gasoline Pump head type: Brass, crankshaft-driven Intake/discharge pump: Yes Working pressure: 275 bar (4000 PSI) Maximum pressure: 300 bar (4400 PSI) Flow rate: 15 l/min (900 l/h) Weight: 71 kg Engine oil: SAE 10W30 Pump oil: SAE 15W40 Condition – new

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. Tsdpsflpmqjfx Abusd ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Condition: reconditioned (used), functionality: fully functional, pressure: 180 bar, empty load weight: 55 kg, KÄRCHER HD 9/18-4 CAGE COLD-WATER PRESSURE WASHER The unit comes with new accessories, including a spray gun from the German brand R+M, a stainless steel spray lance, a steel-reinforced high-pressure hose, and a power nozzle. A durable brass pump head, equipped with new ceramic pistons and seals, ensures long-lasting, trouble-free operation. A highly efficient three-phase motor guarantees stable performance, even during prolonged use. With an operating pressure of 180 bar and a flow rate of 900 l/h, this machine is well-suited for demanding tasks in construction, industry, logistics, and agriculture. Each unit we offer is photographed individually; you are purchasing the exact machine shown in the images. TECHNICAL DATA: Model: HD 9/18-4 CAGE Power supply (~/V/Hz): 3 / 400 / 50 Flow rate (l/h): 900 Inlet water temperature (°C): max 60 Operating pressure (bar): 180 Maximum pressure (bar): 250 Connected load (kW): 5.9 Tsdpfj Afwh Rsx Abujd Weight (kg): 55 Dimensions (L x W x H) (mm): 625 x 500 x 360 ACCESSORIES: NEW heavy-duty spray gun (German brand R+M) NEW stainless steel spray lance NEW 10m steel-reinforced high-pressure hose NEW power nozzle Water filter GEKA claw couplings – FREE OF CHARGE KEY FEATURES: Open oil system – no operating time limits Highly legible and intuitive control panel Simple design with easy access to internal components, making the machine user-friendly and simple to service Large wheels facilitate transport over uneven terrain

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 1 h, High-pressure cleaner PTC CJ-2B, similar to but not an Annovi Reverberi, Comet, Dibo, Ehrle, Frank, Kärcher, Kränzle, Nilfisk, Oertzen, Walter, Weidner… - Operating pressure: 130 bar - Flow rate: 32 l/min - Engine: Honda GX390 gasoline, 8.7 kW - Dimensions: 1160 x 580 x 710 mm - Dry weight: approx. 80 kg - High-pressure pump: Comet three-plunger pump with ceramic plungers - Robust steel frame - Practical holder for gun with lance - Pressure gauge - Built-in professional pressure relief valve - Manual stainless steel hose reel with 30 m high-pressure hose 3/8" + 10 m high-pressure hose 3/16" - 2 pieces of 3/8" and 1 piece of 1/8" F pipe cleaning nozzles - Gun with washing lance and flat jet nozzle Tjdpfxegigqxo Abuod The CJ-2B is a professional mobile high-pressure cleaning unit, ideally suited for cleaning and removing blockages in pipes with diameters from 40 to 200 mm. It is ideal for cleaning and removing blockages in house connections, septic tanks, cisterns, and industrial waste pipes. The powerful Honda engine with an output of 8.7 kW and the Comet TW Premium pump with speed control guarantee the highest performance and reliability over time. This unit provides the optimal solution for professionals seeking an efficient and powerful machine that can handle the most demanding work situations, thanks to its robust steel frame and large pneumatic tires.

Condition: new, operating pressure: 210 bar, high-pressure hose length: 20,000 mm, input voltage: 400 V, overall weight: 160 kg, warranty duration: 24 months, temperature: 155 °C, TECHNICAL DATA OF THE KARCHER HDS 10/21-4MXA WASHER: Model: HDS 10/21-4MXA Manufacturer: KARCHER Country of production: Germany Series: Professional Condition: NEW Tjdsv Tbbdopfx Abujd Thread type: KARCHER !EasyLock series Power supply (~/V/Hz): 3 / 400 / 50 Pumping capacity (l/h): 500 - 1000 Working pressure (bar/MPa): 30 - 210 Maximum pressure (bar/MPa): 230 Water heating range (°C): 80-155 Connection power (kW): 7.8 Power cable (m): 5 Weight (kg): 173 Dimensions (L x W x H) (mm): 1330 x 750 x 1210 EQUIPMENT OF THE KARCHER HDS 10/21-4 MXA WASHER: Pressure gun: Karcher Professional !EasyForce Advanced High-pressure hose: Karcher Professional - Longlife series 20M, DN8, 315BAR - !EasyLock Automatic high-pressure hose reel: Professional, originally integrated reel with a capacity of 20m - automatic winding. Spray lance: Karcher Professional 1050 mm !EasyLock Nozzle: Pressure nozzle POWER Karcher Professional !EasyLock Pressure regulator: Servopress KARCHER !EasyLock RELIABLE | DURABLE | ERGONOMIC In the offered HDS line, the main emphasis is placed on ergonomics and work comfort 4-pole, water-cooled engine Two detergent tanks separated from each other ECO mode allows you to optimize fuel consumption (up to 20%) The set is equipped with an integrated, automatic pressure hose reel that significantly improves work comfort Additional handles allow you to transport the device with additional equipment. The brass pump head and automatic pressure reduction system extend the life of the device. A large water filter protects the pump from impurities that may be present in the water. A standard EASY!Force Advance high-pressure gun with a rotating lance, a 20m high-pressure hose on the reel, a Servopress pressure regulator and a power nozzle EASY!Force technology reduces the force needed to hold the gun trigger to zero. The device also has an EASY!Lock equipment mounting system that allows you to change equipment 5x faster than a traditional thread system. The device is completely new and factory-packed

Condition: new, Year of construction: 2024, operating pressure: 140 bar, total length: 800 mm, total height: 1,700 mm, total width: 1,000 mm, water tank capacity: 95 l, power: 3 kW (4.08 HP), temperature: 45 °C, TurboClean Evo II is a professional high-pressure washer made of stainless steel. The washing process takes place in closed circuit with water with special detergent with max. temperature 45oC. Working pressure is 140 bar, thereby hard to reach places and heavily soiled items of carbon deposits, grease or oil can be thoroughly washed. The flap is equipped with pneumatic drives, to increase the safety and the quality of work the washing machine. It is also equipped with oil skimmer, a brush and an air gun. There are cleaning nozzles installed on the window, which improve visibility and ease of work. It is a perfect solution for workshops and parts remanufacturing. Manufactured in Poland. Tjdpfxsq Ru Ame Abued

Condition: new, operating pressure: 210 bar, high-pressure hose length: 10,000 mm, overall weight: 160 kg, warranty duration: 24 months, TECHNICAL DATA OF THE KARCHER HDS 10/21-4 M WASHER: Model: HDS 10/21-4 M Manufacturer: KARCHER Country of production: Germany Series: Professional Condition: NEW Thread type: KARCHER !EasyLock series Tjdpfx Aov Tci Njbusd Power supply (~/V/Hz): 3 / 400 / 50 Pumping capacity (l/h): 500 - 1000 Working pressure (bar/MPa): 30 - 210 Maximum pressure (bar/MPa): 230 Water heating range (°C): 80-155 Connection power (kW): 7.8 Power cable (m): 5 Weight (kg): 160 Dimensions (length x width x height) (mm): 1330 x 750 x 1060 EQUIPMENT OF THE KARCHER HDS 10/21-4 M WASHER: Pressure gun: Karcher Professional !EasyForce Advanced High pressure hose: Karcher Professional - Longlife series 10M, DN8, 400BAR - !EasyLock Spray lance: Karcher Professional 1050 mm !EasyLock Nozzle: Pressure nozzle POWER Karcher Professional !EasyLock Pressure regulator: Servopress KARCHER !EasyLock RELIABLE | DURABLE | ERGONOMIC In the offered HDS line, the main emphasis is placed on ergonomics and work comfort 4-pole, water-cooled engine Two detergent tanks separated from each other ECO mode allows you to optimize fuel consumption (up to 20%) Additional handles allow you to transport the device with additional equipment. The brass pump head and automatic pressure reduction system extend the life of the device. A large water filter protects the pump from impurities that may be present in the water. As standard, the EASY!Force Advance high-pressure gun with a rotating lance, a 10m high-pressure hose, a Servopress pressure regulator and a power nozzle EASY!Force technology reduces the force needed to hold the gun trigger to zero. The device also has an EASY!Lock equipment mounting system that allows you to change equipment 5x faster than a traditional thread system. The device is completely new and factory-packed

Condition: good (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 1.811-943.0, high-pressure hose length: 45 mm, pressure: 230 bar, fuel: diesel, power: 6.8 kW (9.25 HP), temperature: 95 °C, For sale is a well-maintained and fully functional Kärcher HD 1000 DE hot water high-pressure cleaner, manufactured in 2020, from our commercial cleaning business. The machine is in good used condition and is ready for immediate use. It has been thoroughly cleaned and serviced before sale. The engine oil and the oil of the high-pressure pump have been replaced, and the air filter has been cleaned. The high-pressure cleaner features a robust Yanmar diesel engine and a diesel-fired hot water generator. The high-pressure pump, engine, and hot water operation function perfectly. An operating hour meter is not installed on the machine, therefore, operating hours cannot be specified. Reason for sale: The machine is being sold solely because we have now installed an equivalent hot water high-pressure system permanently in one of our vehicles. Therefore, this mobile unit is no longer needed. Inspection and a detailed test run under operating conditions are possible and expressly encouraged after scheduling an appointment. Technical data Manufacturer: Kärcher Model: HD 1000 DE Article number: 1.811-943.0 Year of manufacture: 2020 Drive: Yanmar diesel engine Displacement: 435 cm³ Engine power: 6.8 kW at 3,600 rpm Working pressure: approx. 190 bar Max. pressure: 230 bar Flow rate: 15 l/min (900 l/h) Max. water temperature: 98 °C Burner output: 59 kW Weight: approx. 197 kg Operating hours: not readable / no operating hour meter available Extensive Kärcher accessories included The machine is sold as a complete, ready-to-use package: * Kärcher EASY!Force Advanced high-pressure gun * High-pressure lance with pressure regulation * Kärcher EASY!Lock system * 30 m high-pressure hose * additional 15 m high-pressure hose * coupling to connect both hoses - allowing up to 45 m hose length * Rotating nozzle / rotor nozzle * Flat spray nozzle * Kärcher eco!Booster TR 50 * integrated hose reel Especially the combination of the 45 m high-pressure hose, EASY!Force Advanced, and the different nozzles makes the machine interesting for larger areas and professional applications. Maintenance performed before sale: * Engine oil replaced * High-pressure pump oil replaced * Air filter cleaned * Machine completely cleaned * High-pressure function tested * Hot water / burner function tested * Functional test performed The machine is in perfect technical condition and ready for immediate use. Suitable for, among other applications: Commercial cleaning, facade cleaning, industrial and hall cleaning, construction companies, agriculture, agricultural machinery cleaning, municipal services, and other professional high-pressure and hot water cleaning tasks. Location: 45966 Gladbeck, North Rhine-Westphalia Tsdpfx Abeztut Ajusd Inspection and test run: Possible and expressly desired after prior appointment. Sale by a commercial enterprise. An invoice with VAT will be issued.

Condition: new, Year of construction: 2025, functionality: fully functional, operating pressure: 230 bar, high-pressure hose length: 10,000 mm, input voltage: 400 V, warranty duration: 24 months, SPECIFICATION: Model: KPC-7.5TP Voltage/Hz: 400/50 Max Pressure (Bar): 230 Flow Rate (L/h): 1080 Power (W): 10,000 Motor: Induction RPM: 1450 PREMIUM CRANKSHAFT PUMP BRASS HEAD WITH FLANGED BYPASS VALVE CERAMIC PISTONS, 18 mm DIAMETER STAINLESS STEEL SUCTION AND DELIVERY VALVES THREE-PHASE INDUCTION MOTOR WITH THERMAL PROTECTION AND COPPER WINDINGS PROFESSIONAL ACCESSORIES INCLUDING 4 NOZZLES WITH DIFFERENT SPRAY ANGLES FOR ALL TYPES OF SURFACE AND CONTAMINANT EQUIPPED WITH A PRACTICAL ACCESSORY HOLDER AND A PROFESSIONAL, BRAIDED HIGH-PRESSURE HOSE Crankshaft pump with ceramic pistons – uncompromising quality: - This pump type represents the top tier among pressure washers – ensuring reliability, precise operation, and long service life. - Ceramic pistons are highly resistant to wear, significantly extending maintenance intervals. - Ideal for continuous use – with no performance loss, even after many hours of daily operation. Low-speed motor – built for extreme workloads: - Operates at 1,450 rpm, minimizing mechanical wear. - Powerful, efficient, and properly cooled for demanding, all-day applications. Todpfxjw Icn Se Abuod

Condition: reconditioned (used), Year of construction: 2021, functionality: fully functional, operating pressure: 180 bar, input voltage: 400 V, fuel: electricity, overall weight: 32 kg, warranty duration: 6 months, KÄRCHER HD 8/18-4M ST PRESSURE WASHER YEAR 2021 The unit comes with new accessories, including a spray gun from the German brand R+M, a stainless steel lance, a steel-braided hose, and an adjustable nozzle. A durable brass pump head with new ceramic pistons and seals ensures long-lasting, trouble-free operation. A highly efficient three-phase motor ensures stable performance, even during prolonged use. With operating parameters of 180 bar and 760 l/h, the machine is effective for heavy-duty tasks in construction, industry, logistics, and agriculture. Each unit we offer features individually taken photos; you are buying the exact machine shown. TECHNICAL DATA: Power supply: 3-phase - 400 V - 50 Hz Flow rate (l/h): 760 Operating pressure (bar): 180 Max. pressure (bar): 200 Connected load (kW): 4.6 Tjdpfx Ajz Aryrobued Weight (kg): 32 Dimensions (L x W x H) (mm): 290 x 300 x 565 Hose length (m): 10 EQUIPMENT: NEW durable spray gun (German brand R+M) NEW stainless steel spray lance NEW reinforced 10m steel-braided high-pressure hose NEW adjustable nozzle Water filter and GEKA claw couplings – FREE KEY FEATURES: Open oil system – no operating time limits Highly legible and... intuitive control panel Its simple design and easy access to internal components make the machine user-friendly and easy to service.

Condition: like new (used), Year of construction: 2026, operating hours: 1 h, functionality: fully functional, machine/vehicle number: GP1000-GE1065BD, operating pressure: 220 bar, total length: 1,900 mm, high-pressure hose length: 20,000 mm, total height: 1,300 mm, total width: 1,200 mm, pressure: 220 bar, empty load weight: 160 kg, fuel: super 95, overall weight: 170 kg, water tank capacity: 1,000 l, warranty duration: 24 months, fuel tank capacity: 6 l, The Gaspper GP1000 high pressure washer is designed for the most demanding cleaning jobs in different areas of our economy. Mainly targeted areas are construction, agriculture, industry of any kind, as well as various public services. Depending on the specific requirements, the possibilities of use are almost endless. Key Features Petrol Engine: Briggs&Stratton XR950, 4-stroke, OHV Power: 6.5 HP / 4.7 kW Water pressure: 220 bar / 3.200 PSI Flow rate: 14 l/m The water tank with a capacity of 1000L and the 15L detergent tank, combined with a 4-stroke heat engine mounted on a solid metal frame, gives enviable independence from the running water and electricity cables. The machine can be used in the most isolated areas. The device is moved from one place to another with the help of a forklift or front loader. Package contents: High-pressure washer Pressure gun Tsdpfxj Aayare Abujd 20m high-pressure rubber hose Stainless Steel Extension Lance Nozzle 0 ̊ Nozzle 15 ̊ Nozzle 25 ̊ Nozzle 40 ̊ Soap nozzle Waspper engine oil Operation manual Water Tank – 1000L

Condition: reconditioned (used), functionality: fully functional, operating pressure: 180 bar, empty load weight: 178 kg, input voltage: 400 V, temperature: 155 °C, KARCHER HDS 12/18-4SX HOT WATER WASHER BUILT-IN HOSE REEL The device features new accessories, including a German R+M gun, stainless steel lance, steel-braided hose, and a 25° power nozzle. A durable brass head with new ceramic pistons and seals guarantees long and trouble-free operation. A highly efficient, low-speed three-phase motor ensures stable operation even during prolonged use. With operating parameters of 180 bar and 1200 l/h, the machine can be effectively used for heavy-duty work in construction, logistics, and agriculture. Each device we offer has individually taken photos; you are buying exactly what you see. TECHNICAL DATA: Model HDS 12/18-4SX Power supply voltage 400V ~ 3 phases Pumping capacity (l/h) 600 - 1200 Operating pressure (bar) 30 - 180 Max. Water heating temperature (°C) 80-155 Connection power (kW) 8.4 Fuel tank capacity (l) 25 Cleaning agent tank capacity (l) 20 + 10 Pressure hose length (m) 20 Weight (kg) 178 Dimensions (L x W x H mm) 1330 x 750 x 1060 Todpfx Abezrw A Deued EQUIPMENT: BUILT-IN HOSE REEL NEW durable pressure gun from the German brand R+M NEW stainless steel pressure lance NEW reinforced 20m steel braided pressure hose NEW 25° power nozzle WATER FILTER AND GEKA CLAW COUPLINGS - FREE KEY FEATURES: Open oil system - unlimited time Operation: Two built-in chemical tanks allow for dispensing cleaning fluid directly through the machine. A clearly laid-out and intuitive control panel. The simple design and easy access to individual components under the housing make the machine user-friendly and easy to service. The RM110 water softener tank prevents corrosion and scale buildup inside the heating coil and other pipes. An exhaust gas temperature sensor shuts off the engine at temperatures exceeding 300°C. When the eco!efficiency function is activated, the device heats water to 60°C, allowing for effective cleaning of even the most stubborn stains while reducing fuel consumption by approximately 20%.

Condition: used, Year of construction: 2008, operating hours: 5,778 h, functionality: fully functional, total width: 1,980 mm, total length: 3,750 mm, total height: 2,050 mm, pressure: 2,500 bar, operating pressure: 2,500 bar, fuel: diesel, overall weight: 2,600 kg, rotational speed (max.): 1,800 rpm, high-pressure hose length: 20,000 mm, water tank capacity: 400 l, volume flow: 1.2 m³/h, empty load weight: 1,940 kg, temperature: 40 °C, fuel tank capacity: 220 l, type of cooling: water, noise level: 103 dB, power: 129 kW (175.39 HP), year of last overhaul: 2026, water pressure: 2,500 bar, cubic capacity: 4,760 cm³, pump capacity: 20 l/min, Equipment: type plate available, Falch trail jet 100 2500-20-0-d with a maximum of 2500 bar and 20 l/min. The pump is driven by a water-cooled 4-cylinder DEUTZ diesel engine. General specifications: ----- Operating pressure: 2500 bar Flow rate: 20 l/min Maximum pump speed: 590 rpm Drive engine: 4-cylinder DEUTZ diesel Drive engine power: 129 kW Drive engine speed: 1800 rpm Fuel tank: 220 L Maximum fuel consumption: 12.5 L/h Safety system: ----- Low water level safety valve Burst discs Tedpfo Agb Dzex Abued Steel safety frame Impact-resistant water tank Impact- and rust-resistant fuel tank Electronic Falch Easy display system Engine temperature Alarm for open lid Oil pressure Engine overheating Advantages: ----- Shorter setup times Steel safety frame for reduced downtime Water filter for consistent water quality High-quality components reduce maintenance costs Water-cooled diesel engine Long service life Maintenance every 500 hours Low fuel consumption Theft protection Dimensions and unladen weight: 3750mm x 1980mm x 2050 mm (1940 kg) Includes standard accessories (20m HD hose, control cable, gun with lance and jet nozzle) and rotor nozzle. Condition: HD pump has a new seal kit, new battery and water filter. Similar to, but not a Denjet, Dynajet, Hammelmann, Kamat, Uraca, Woma, etc.

Condition: reconditioned (used), functionality: fully functional, operating pressure: 180 bar, empty load weight: 178 kg, input voltage: 400 V, warranty duration: 6 months, temperature: 155 °C, KARCHER HDS 12/18-4S HOT WATER PRESSURE WASHER This device features new accessories, including a German R+M gun, a stainless steel lance, a steel braided hose, and a 25° power nozzle. A durable brass head with new ceramic pistons and seals guarantees long and trouble-free operation. A highly efficient, low-speed three-phase motor ensures stable operation even during prolonged use. With operating parameters of 180 bar and 1200 l/h, the machine can be effectively used for heavy-duty work in construction, logistics, and agriculture. Each device we offer has individually taken photos; you are buying exactly what you see. TECHNICAL DATA: Model HDS 12/18-4S Power supply voltage: 400V ~ 3 phase Discharge capacity (l/h): 600 - 1200 Working pressure (bar) 30 - 180 Max. Water heating temperature (°C) 80-155 Connection power (kW) 8.4 Fuel tank capacity (l) 25 Cleaning agent tank capacity (l) 20 + 10 Pressure hose length (m) 10 Weight (kg) 178 Dimensions (L x W x H mm) 1330 x 750 x 1060 EQUIPMENT: Tsdpfx Abjzh D N Nsujd NEW durable pressure gun from the German brand R+M NEW stainless steel pressure lance NEW reinforced 10m steel braided pressure hose NEW 25° power nozzle WATER FILTER AND GEKA CLAW COUPLINGS - FREE KEY FEATURES: Open oil system - no operating time limits Two built-in chemical tanks allow for the dispensing of cleaning fluid directly through the The machine is easy to use and has a clear and intuitive control panel. The simple design and easy access to individual components under the housing make the machine user-friendly and easy to service. The RM110 water softener tank prevents corrosion and scale buildup inside the heating coil and other pipes. The exhaust gas temperature sensor shuts off the engine at temperatures exceeding 300°C. When the eco!efficiency function is activated, the device heats the water to 60°C, allowing for effective cleaning of even the most stubborn stains while reducing fuel consumption by approximately 20%.