Used High Pressure Water Jet Pump for sale (44)

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 1 h, The CE125 series is an electrically driven high pressure machine for a pressure of 200 to 2500 bar and a volume flow of 21 to 240 l/min. The frame consists of hot-dip galvanised sheet metal mouldings and stainless steel side frames. Four rubber feet ensure safe positioning. The lifting eye facilitates the transport of the machine. Similar but no Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc. Available models: ----- 50 Hz -bar-l/min. CE125-200-240 Lholshga Rxehcdwweg CE125-1500-35 CE125-2500-21 60 Hz and others see data sheet and on request. General specifications: ----- Power of drive motor: 90 kW (50Hz) / 90 kW (60Hz) Volt: 400V (50Hz) - 440V (60Hz) Amp: 81A (50Hz) - 108A (60Hz) Dimensions: 2150 mm x 1385 mm x 1750 mm Weight: 2000 kg Standard accessories included.

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 1 h, The CD700 can easily handle cleaning applications with high flow and pressure requirements. The pump is powered by a 6-cylinder Volvo diesel engine. There are two variants of the engine with an exhaust system according to EU Stage V / US EPA Tier 4 final or with an exhaust system according to EU Stage 2 / US EPA Tier 2. The Stage V solution is a pure SCR exhaust system. The frame is manufactured to be corrosion-resistant and is primed and painted for an attractive appearance. The frame is equipped with rubber mounts and forklift pockets. The machine can be supplied either as an open frame solution or as a fully built-in solution in a trailer or container. The CD700 can be equipped with a manual gearbox, which allows the pump to be operated in several flow ranges and even manual operation in the lowest gear is possible. Similar but no Falch, Hammelmann, Kamat, Uraca, Woma, etc. Available models: ----- Model Pressure Flow rate CD700-1000 1000 bar 261 Lpm General specifications: ----- Max. Pump speed: 522 rpm Drive engine: 6 cyl. Volvo Diesel EU Stage V or EU Stage II Power of the drive motor: 522 kW Lelhcjhgblkjdwwjhg Drive engine speed: 1800 rpm Diesel tank: 800 L Max. Fuel consumption: 90 L/h Dimensions and weight on base frame: 3100mm x 1700mm x 2300 mm (5850 kg)

Condition: reconditioned (used), Year of construction: 2008, Functionality: fully functional, machine/vehicle number: 95461, total width: 4,200 mm, total length: 2,200 mm, total height: 3,400 mm, pressure: 4.1 bar, operating pressure: 3,800 bar, type of input current: three-phase, overall weight: 6,000 kg, year of last overhaul: 2024, Offered for sale by the official UK Water Jet Sweden authorised service centre is this Premium model NC4020ED complete with KMT intensifier pump. The machine has been serviced by ourselves using exclusively OEM parts and consumables and its dynamic accuracy remains with in the specification of the machine as new. Lhslhcjvntqmodwwjg The machine is offered with delivery, installation, training and warranty within the UK. Available under power for any test or trial. The Fanuc controller drives the system, which as linear measuring scale along the X axis, and magnetic linear motors. This allows the heads to automatically reposition themselves during the cutting cycle to allow production of different sized parts on the same nesting. The YouTube link shows this technology in operation.

Condition: refurbished (used), Year of construction: 2006, table length: 3,500 mm, table width: 1,500 mm, Pictures are in current condition - two Z-axes - 1 x 45° Schnedikopf , 1 x 2D - control unit will be renewed - will be sandblasted and repainted - pump optionally available - available in 12-16 weeks after order Special features: - individually customizable to customer requirements - 12 months or 2,000 hours warranty (not on spare and wear parts) Lolhcenab Rzedwwehg We offer a discount when concluding a maintenance or service contract! Contact us and we will make you a customized offer!

Condition: good (used), Year of construction: 2004, table length: 3,000 mm, table width: 4,500 mm, operating pressure: 3,800 bar, warranty duration: 12 months, total length: 4,500 mm, total width: 3,000 mm, water pressure: 3,800 bar, (Pictures in actual condition) - two to four cutting heads - control unit will be renewed - will be sandblasted and repainted - pump optionally available - available in 12-16 weeks after order Special features: - Z-axes can be moved in relation to each other - Z-axes double guided - max. two cutting heads per Z-axis - Can be individually adapted to customer requirements - 12 months or 2,000 hours warranty (not on spare and wear parts) Lholhcdwogvpu Ujwjg We offer a discount when concluding a maintenance or service contract! Contact us and we will make you a customized offer!

Condition: refurbished (used), Year of construction: 2000, table length: 1,000 mm, table width: 1,000 mm, operating pressure: 3,800 bar, (Pictures in current state) - prepared for two cutting heads (1x pure water) - Control unit will be renewed - will be sandblasted and repainted - Pump optionally available - available after order in 12-16 weeks Special features: - max. two cutting heads per Z-axis - Can be individually adapted to customer requirements - 12 months or 2,000 hours warranty (not on spare and wear parts) Ljlhcsnab Rlodwwshg We offer a discount when concluding a maintenance or service contract! Contact us and we will make you a customized offer!

Condition: refurbished (used), Year of construction: 1999, - two cutting heads - control unit is renewed - will be sandblasted and repainted - Pump optionally available - available in 12-16 weeks after order Special features - individually customizable to customer requirements Lelhonab Sijcdwwohg - 12 months or 2,000 hours warranty (not on spare and wear parts) We offer a discount when concluding a maintenance or service contract! Contact us and we will make you a customized offer!

Condition: ready for operation (used), Year of construction: 1999, machine/vehicle number: 9558, Used fully functional WJS waterjet cutting machine with KMT SLIV 50 HP pump. Machine is in disassembled condition and can not be inspected. Ljlhcei Hckrjdwwshg Installation and commissioning will be done by us and is not included in the price. The machine can also be completely overhauled ( new control cabinet, new control and new CE. This would mean a surcharge of about 50.000€)

Condition: excellent (used), Year of construction: 2019, Low pressure sandblasting unit SUB Jet K45, year of manufacture 2019, Ljlhcsi Dxkbodwwjhg 45 liter boiler + chassis, infinitely variable 0.1 - 10 bar, pilot operated diaphragm pressure regulator, screen with wire mesh insert, cyclone separator on the blasting unit, breathing air filter directly on the blasting unit, wet blasting and dry blasting, wet blasting system with water atomizer, 1x 10 meter blasting hose with TPT blasting head 19 mm with 2 nozzles 6 + 7 mm, 1x 10 meter blasting hose with TPT blasting head 13 mm with 2 nozzles 3 + 5 mm, with water hoses, with vacuum blasting system for small areas suction head 13 mm, SUB blasting helmet with spare discs and 16 meter hose package

Condition: new, Year of construction: 2025, Functionality: fully functional, repeat accuracy: 0.025 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 310 mm, positioning accuracy: 0.025 mm, type of input current: three-phase, input voltage: 380 V, sheet thickness aluminum (max.): 300 mm, operating speed: 15,000 mm/s, pressure: 4,150 bar, warranty duration: 24 months, cutting speed: 15,000 mm/min, travel speed (max.): 20,000 mm/min, table load: 1,200 kg, year of last overhaul: 2025, material thickness: 300 mm, Brand new Waterjet Cutting Machine 💧 Waterjet Cutting Machine X-JET 1530 – PROFESSIONAL – Made in Poland 🇵🇱 🔧 Polish production – the highest quality and precision! The modern, fully professional X-JET waterjet cutting machine is a solution created with the most demanding customers in mind. Thanks to the use of the latest technologies and a rigid frame construction, the machine guarantees excellent cutting quality, high precision and durability for years. 🔹 Key Features: Working area (3-axis): 1500 x 3000 mm Feed speed X/Y: up to 20,000 mm/min Positioning accuracy: ±0.025 mm Repeatability: ±0.025 mm Max. table load: 1200 kg/m² Closed moving units + servo drives Electronic central lubrication Advanced CNC software + IGEMS CAD/CAM 2D/3D Possibility of mounting 💥 5X head: Taper angle compensation and chamfering up to 45° Drive: Harmonic Drive + Spinea TS Ljlhov Tmxujcdwwshg Pneumatic on/off valve with diamond head Cutting height adjusted automatically Calibration of Z axis and tools 🧠 Intelligent systems: 12 MP camera Automatic tool angle setting system 5x precise cutting calibration system 💦 High pressure pump: Max. working pressure: 4150 bar (60000 psi) Constant working pressure: 3792 bar (55000 psi) Flow: up to 3.8 l/min Nozzle diameter: 0.10–0.35 mm High quality multiplier and proportional valve Quiet operation and touch screen control ⚙️ Additional equipment: Automatic abrasive removal system – WAWE 170 Professional abrasive feeder – DUNA 1100 Water treatment system with osmosis Economical sludge extractor – 170 l/min 📍 Made in Poland – a local product with global possibilities. 💬 Please contact us! We will be happy to send you full technical documentation and prepare an individual offer. Possibility to make any machine size and any configuration on request *(preview photos, the offer applies to a device with a working area of 1.5x3m, 3-axis)

Condition: as good as new (ex-display), Year of construction: 2022, operating hours: 35 h, Functionality: fully functional, Waterjet cutting system 1020 EcoCube 2D Demonstration system, fully serviced, tested and ready for operation, Maximator JET certificate Availability: within one week High-pressure pump: optional after consultation and availability, e.g. SERVOTRON 40.45+, year of manufacture 2018, complete Maximator JET retrofit Year of manufacture of cutting table: 2022 Operating hours of cutting table: 35 h • Effective cutting area 1,000 x 2,000 mm • CNC control NUM FLEXIUM • Z-axis CNC clear height 100 mm with Quick-UP • Automatic height sensing and collision protection • Laser for position determination • LED work area lighting • Cutting valve including abrasive cutting head • Ergonomic control panel • HP operator PC with 20 inch LED screen, splash-proof keyboard and Mouse • Water jet software SmartCut powered by IGEMS Lolhcdwjv Dfxzewehg • Abrasive dosing unit CNC with intermediate container • Abrasive storage container 450 kg with mini hopper pressure conveying system • High pressure connection between pump and cutting head • Safety system with automatic lifting door • Stop edge in X and Y • Guarantee 1 year or 2,000 operating hours Price ex works plus VAT €125,000 Additional services  2D training, system operation for up to 4 people on site at the customer's premises, 2 days €2,400  Installation and assembly up to 400 km one way, 2 days €2,400  Transport according to current daily price approx. €1,600 Subject to changes and errors in the technical data and prices. Subject to prior sale. Payment conditions  100% after delivery, commissioning and acceptance on site

Year of construction: 2021, operating hours: 1 h, Condition: as good as new (ex-display), The HDT50 in the hot water trailer version covers a pressure of 230 to 500 bar at a flow rate of 33 to 80 l/min. The pump is driven by a water-cooled 4-cylinder Toyota diesel engine. Durability and corrosion resistance are ensured, among other things, by the frame inside the trailer, which is made of hot-dip galvanized steel. In addition, the frame is primed and then painted, which creates a very attractive appearance. The frame can be pulled out very easily for maintenance. The CD50 in the trailer version can be configured with numerous options, such as a hot water boiler, electrically operated hose reel, remote control, etc.. Similar but no Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc. Models available: ----- Model Pressure Flow rate HDT50-230 230 bar 80 Lpm HDT50-400 400 bar 40 Lpm HDT50-500 500 bar 33 Lpm General Specifications: ----- Max. Pump speed: 1160 rpm Drive engine: Toyota Diesel 4 Cyl. water cooled Drive motor power: 37.3 kW Drive motor speed: 1900 rpm Tank capacity: 90 L Max. Fuel consumption: 11.0 L/h Loudness (1m): 89 dBa Dimensions and weight: 3050mm x 1700mm x 1900 mm (2000 kg) Lslhshgbkujcdwwehg

Condition: ready for operation (used), Year of construction: 2008, Table size: 220 x 820 mm Table size (front table): 250 x 350 mm Grinding wheel dimensions: 150 x 2260 mm Grinding belt speed: 16 m/s Lslsv Efn Sjhcdwwohg Drive motor: 400 V, 1.5 kW Weight: 164 kg Space required: 1200 x 600 x 1250 mm

Condition: excellent (used), Year of construction: 2010, Functionality: fully functional, Technical details x-travel 750 mm y-travel 400 mm z-travel 500 mm Control Heidenhain TNC 320 Lolhcewi H H Nsdwwehg spindle turning speed range 3800 U/min transmission ratio 2 tool taper 40 SK table-size 1500 x 670 mm table surface area 1270 x 320 mm table load 600 kg spindle drive 5,5 kW distance spindle /table 100-600 (min.-max.) mm distance spindle center to column 526 mm quill travel 120 mm weight of the machine ca. 2,2 t dimensions of the machine ca. 3,10 x 2,45 x 2,50 m Additional information CNC universal milling machine comes from a swiss company. Year of production: 2010 First machine installation: 2012 Equipment: * 3-axes CNC-control Heidenhain TNC 320 * Additional handwheels for manual operation * Manually swiveling milling head (45 /90 deg.) with drilling quill * Central lubrication * Coolant equipment * Documentation/manual Maximum machining capacities: Drilling mild steel 40 mm diameter Tapping M 36 Boring 120 mm

Condition: excellent (used), JET DDS225 Cylindrical Grinder - Used - Closed base cabinet with storage space ----- Technical Specifications ----- Grinding width: 635 mm, Max. workpiece thickness: 133 mm, Min. workpiece thickness: 0.8 mm, Min. workpiece length: 230 mm, Grinding drum diameter: 152 mm, Feed speed: 2/3 m/min., Speed: 1,400 rpm, Motor: 5.5 kW, Extraction nozzles: 2 x 100 mm Quality information: - Complete basic cleaning - Electrical system checked - Adjusted according to manufacturer's specifications Lholhcev U Anzedwweg - Ready for immediate use

Condition: like new (used), Year of construction: 2007, operating hours: 151 h, Functionality: fully functional, warranty duration: 12 months, Cold jet Aero 30 Machine is as new machine is suitable for industrial cleaning. Reducing and very large projects. The advantage for this machine is that it is not full of new generation electronics. It is one of the most aggressive machines on the market. This machine is in excellent condition. Cold jet Aero 30 Dry Ice Blasting Machine Complete with the Following Equipment Lhelhswg R Rmscdwwsg COLDJET AERO 30 DRY ICE (151 HOURS RUN) 1 x 20' Blasting Hose 1 x Cold jet Applicator 2 x Nozzles NEW Price: €14900 One of the best machines in the world. No electronics in it. That's why it's reliable. And it's not that expensive to maintain. For inquiries or to arrange a viewing, please contact us Dr.Dryice All machines sold have a 1-year warranty. Repairs and maintenance of Cold Jet machines. Worldwide Shipping.

Condition: repair required (used), REA-JET HR print head for 1 cartridge (054300000) Lslhcdwowlg I Sowshg

Condition: good (used), Year of construction: 2006, JET Model GH-2280ZX Geared Head Precision Gap Bed Centre Lathe With Accurite 200S DRO 3 Jaw Chuck. Ø560mm Swing Over Bed. Ø330mm Swing Over Cross Slide. Ø736mm Swing Over Gap. Distance Between Centres 2,000mm. Length of Gap 305mm. Spindle Bore Ø79mm. Compound Slide Travel 130mm. Width of Bed 333mm. Spindle Nose D1-8. Range of Longitudinal Feeds 0.04–23.19mm/rev. Range of Cross Feeds 0.15–0.93mm/rev. Number of inch Threads 61, Range Of Inch Threads 1-5/8 – 72 (tpi). Number of Metric Threads 24, Range of Metric Threads .05 – 20. Multifix Quick Change Toolpost. Tailstock Spindle Travel 152mm. Tailstock Taper MT5. Maximum Tool Size 25 x 25mm. S/No. 5020079 (2006). Ljlhcdswi T Nqjwwshg With Steady Rest, Coolant System, Low Voltage Light & Manuals. Overall Dimensions L3,318 x W1,075 x H1,354mm. Weight 3,145kg.

Condition: used, Lightweight edge sander Jet type EHVS-80 cs for precise sanding of straight and curved wood edges. The lightweight construction and powerful motor enable a consistent sanding pattern with high removal rates. Ideal for small carpentry shops, furniture construction, and interior design. sanding belt length: 2260 mm Sanding belt width: 150 mm Ljlhcdewffpbswwehg table: Pivotable engine power: 1,5 kW Suction nozzle: 100 mm

Year of construction: 2022, operating hours: 1 h, Condition: as good as new (ex-display), The CDT50 in the trailer version covers a pressure of 230 to 2000 bar with a volume flow of 11 to 80 l/min. The pump is driven by a water-cooled 4-cylinder Toyota diesel engine. Durability and corrosion resistance are ensured, among other things, by the frame inside the trailer, which is made of hot-dip galvanized steel. In addition, the frame is primed and then painted, which creates a very attractive appearance. The frame can be pulled out very easily for maintenance. The CD50 in trailer version can be configured with numerous options such as hot water boiler, electrically operated hose reel, remote control etc. Similar but no Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc. Models available: ----- Model Pressure Flow rate CDT50-230 230 bar 80 Lpm CDT50-400 400 bar 40 Lpm CDT50-500 500 bar 33 Lpm CDT50-700 700 bar 25 Lpm CDT50-1000 1000 bar 20 Lpm CDT50-1250 1250 bar 15 Lpm Lelhcdwehgbkfewohg CDT50-1380 1380 bar 13 Lpm CDT50-2000 2000 bar 11 Lpm General Specifications: ----- Max. Pump speed: 1160 rpm Drive engine: Toyota Diesel 4 Cyl. water cooled Drive motor power: 37.3 kW Drive motor speed: 1900 rpm Tank capacity: 90 L Max. Fuel consumption: 11.0 L/h Loudness (1m): 89 dBa Dimensions and weight: 3050mm x 1700mm x 1900 mm (2000 kg)

Condition: new, Year of construction: 2024, Power: 1.35kW Speed range: 230 - 3100 rpm Speed steps: 9 Spindle holder: MK-2 Drilling stroke: 85 mm Ljlhcjuix Sgsdwwjhg Spindle projection: 140 - 540 mm Table size: Table size: 500 x 740 mm / 250 kg load capacity Head inclination: 90° left / 45° right Column diameter: 80 mm Quick-action chuck: 1 - 16 mm Weight: 240 kg

Condition: like new (used), Year of construction: 2008, operating hours: 12 h, Functionality: fully functional, warranty duration: 12 months, Cold jet Aero 75 DX Machine is as new machine is suitable for industrial cleaning. Reducing and very large projects. The advantage for this machine is that it is not full of new generation electronics. It is one of the most aggressive machines on the market. This machine is in excellent condition. Cold jet Aero 75 DX Dry Ice Blasting Machine Complete with the Following Equipment COLD JET AERO 75 DX DRY ICE (12 HOURS RUN) 1 x 20' Blasting Hose 1 x Coldjet Applicator 2 x Nozzles NEW Price: €29800 One of the best machines in the world. No electronics in it. That's why it's reliable. And it's not that expensive to maintain. Estimated New Price €42,000 For inquiries or to arrange a viewing, please contact us DrDryice All machines sold have a 1-year warranty. Repairs and maintenance of Cold Jet machines. Lhelhcdswg R Edswwsg Worldwide Shipping.

Year of construction: 2023, operating hours: 1 h, Condition: as good as new (ex-display), The CE40 belongs to the series of our high pressure machines with an electric drive for a pressure of 100 to 2000 bar and a volume flow of 9 to 160 l/min. The frame consists of hot-dip galvanized sheet metal mouldings and surrounding side frames made of stainless steel. The front wheel and the two large rear wheels including a parking brake ensure easy manoeuvring and stable stationing. A lifting eye facilitates transport. Similar but no Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc. Available models: ----- Lslshga Irshcdwwjhg 50 Hz-bar-l/min. CE40-100-160 CE40-160-100 CE40-230-75 CE40-400-40 CE40-550-30 CE40-700-23 CE40-800-20 CE40-1000-18 CE40-1250-13 CE40-1380-12 CE40-2000-9 60 Hz and others see data sheet and on request. General specifications: ----- Drive motor power: 30 kW (50Hz) / 33 kW (60Hz) Volt: 400V (50Hz) - 440V (60Hz) Amp: 57A (50Hz) - 57A (60Hz) Dimensions: 1600 mm x 1050 mm x 1150 mm Weight: 650 kg Standard accessories included.

Year of construction: 2023, operating hours: 1 h, Condition: as good as new (ex-display), The CD160 series of our high pressure machines covers a pressure of 200 to 2500bar and a volume flow of 25 to 300 l/min. The pump is driven by a water-cooled 4-cylinder SISU diesel engine with turbocharging and charge air cooling. The entire frame is made of hot-dip galvanized steel for durability and corrosion resistance. The frame is primed and then painted for a beautiful appearance. The dimensions of the machine are 2250 x 950 mm. The frame is equipped with rubber feet, forklift pockets and, at all four corners, lifting eyes. The machine has a galvanized roof plate with side brackets for protection and storage of, for example, high pressure hoses. Similar but not Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc. Models available: ----- Model Pressure Flow rate CD160-200 200 bar 300 Lpm CD160-250 250 bar 250 Lpm CD160-1000 1000 bar 63 Lpm CD160-1380 1380 bar 42 Lpm CD160-2500 2500 bar 25 Lpm General Specifications: ----- Max. Pump speed: 560 rpm Drive Motor: 4 Cyl. Water cooled, Turbo Diesel w. Intercooler Drive motor power: 119.3 kW Drive motor speed: 1800 rpm Tank: 140 L Max. Fuel consumption: 26.0 L/h Loudness (1m): 84 dBa Dimensions and weight: 2250mm x 950mm x 1300 mm (1850 kg) Standard accessories included. Lholohgbhnehcdwwog

Year of construction: 2023, operating hours: 1 h, Condition: as good as new (ex-display), The CD50 series of our high pressure machines covers a pressure from 230 to 2000 bar and a volume flow from 7 to 74 l/min. The pump is driven by a 4-cylinder water-cooled Toyota diesel engine. The fully enclosed frame is made of hot-dip galvanized steel to ensure long life and corrosion resistance. The frame is primed and then painted. The machine only requires a footprint of 1550 x 920 mm. There are 4 rubber feet mounted under the frame. The machine is also equipped with forklift pockets and lifting eyes at all four corners. For protection and storage of, for example, high-pressure hoses, a galvanized roof plate is provided. Similar but no Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc. Lhelhcdwshgbf Ejwsg Available models: ----- Model Pressure Flow rate CD50-230 230 bar 74 Lpm CD50-400 400 bar 40 Lpm CD50-500 500 bar 33 Lpm CD50-700 700 bar 25 Lpm CD50-1000 1000 bar 20 Lpm CD50-1250 1250 bar 15 Lpm CD50-1380 1380 bar 13 Lpm CD50-2000 2000 bar 10 Lpm General Specifications: ----- Max. Pump speed: 1160 rpm Drive engine: Toyota Diesel 4 cyl. Water cooled Power of drive motor: 37.3 kW Drive engine speed: 1800 rpm Tank capacity: 90 L Max. Fuel consumption: 10.0 L/h Loudness (7m): 80 dBa Dimensions and weight: 1550mm x 920mm x 1250 mm (725 kg). Standard accessories included.