Used hydraulic single column presses 26-50t for sale (29)

Condition: ready for operation (used), Year of construction: 1992, Immediately available ex location: Hydraulic single-column press Edelhoff Type HEP 45 Year of manufacture: 1992 The machine complies with the latest UVV safety regulations Press force: 45 tons Table: 1000 x 1000 mm Rodpfozap S Ujx Ai Heu Stroke: 300 mm Drive: 7.5 kW Weight: 6 tons Price: EUR 3,000 plus VAT, ex location.

Condition: refurbished (used), Year of construction: 2019, machine/vehicle number: DF0195 - Rev.00, pressing force: 40 t, pressure:40 t passage width:850 mm stroke:500 mm Weight of machine approx.:ca. 3,8 t dimensions:ca.1300 x 1800 x 3200 mm return capacity:4 t pestle plate:600 x 450 mm table plate:750 x 720 mm table height over floor:850 mm Oil cooling (electric):1,5 kW (max) max. working heidht:700 mm Rodpfx Asfhcc Hoi Hou motor capacity:12,7 kW Approaching Speed max. :140 mm/sec pressure speed:15 mm/sec Return Speed:140 mm/sec Oil Tank Capacity:160 l Monitor:WEG - 10 Zoll Siemens Control System:S7 1200

Condition: used, Single-column hydraulic press MAE type S63SZ SO . 551277 Year of manufacture approx. 1977 Nominal pressing force: 63 tons Pressing force: 50 tons (practically tested) Throat depth: 320 mm Table area: 850 x 630 mm Ram area: 1050 x 500 mm Ram stroke: 500 mm Max. installation height: approx. 730 mm Table height above floor: 970 mm Hydraulic tank capacity: 600 liters Drive power: 15 kW Power supply: 380 Volt, 50 Hz - Hydraulic draw cushion below the table with bores through the tabletop Rsdpfx Aijdzp Tro Hsu - Two-hand operation - Electrical control cabinet damaged Required space (L x W x H): 2000 x 1200 x 3420 mm Weight approx. 5 tons The machine is operational, the control cabinet is mechanically damaged. During test run, the machine achieves a pressing force of 50 tons, presumably a pressure relief valve is venting.

Year of construction: 1992, condition: good (used), H Bret press Type: PPH 30 Capacity: 30 T Rodpfjiuc Nwox Ai Heu Bed: 345 x 1345 mm Year: 1992 Dimensions: 160x115x256 cm LxWxH Included control unit and documentation Turn over to pressbrake possible!

Condition: used, Year of construction: 1985, pressure 40 t stroke 500 mm throat 360 mm dayligth 1000 mm table surface area 630 x 500 mm table height over floor 1060 / 720 mm ram surface 450 x 360 mm feed down 60 mm/s feed up 300 mm/s Rodjy Rur Nopfx Ai Hju power requirement 7,5 kW Weight 2,75 t dimensions of the machine ca. 1,0 x 1,8 x 3,05 mxmxm hole in the table 200 mm with oil-hydraulic drive, intermediate plate (height 340 mm) as is where is, WITHOUT putting into operation

Condition: used, Year of construction: 1997, pressure 40 t throat 300 mm stroke 630 mm dayligth 900 mm table surface area 620 x 520 mm hole in the table 150 mm table height over floor 600 mm ram surface 150 mm total power requirement 15,0 kW weight of the machine ca. 4,5 t required space 1,0 x 1,9 x 3,0 m permitted for manual loading according to the CE Regulations Rjdovuuckopfx Ai Hsu with oil-hydraulic drive, controllable dependent on pressure/time and way, two-hand operation

Condition: ready for operation (used), Year of construction: 1977, machine/vehicle number: 212355, functionality: fully functional, pressing force: 40 t, stroke length: 50 mm, table width: 510 mm, table length: 700 mm, ram adjustment: 80 mm, rotational speed (max.): 400 rpm, No reserve price – guaranteed sale to the highest bidder! Placing a bid obligates you to collect the machine within the specified period between 23.06.2026 and 26.06.2026! TECHNICAL DETAILS Pressing force: 40 t Speed range: 65 – 400 rpm Ram stroke: 8 – 50 mm Maximum ram adjustment: 80 mm Table dimensions: 700 mm x 510 mm Decoiler Model: KEMMERICH V 500 AE Diameter: 1,200 mm Redpfx Aoy D Rycji Hsu MACHINE DETAILS Drive power: 7.5 kW Dimensions & Weight Dimensions (L x W x H): 4,000 x 1,200 x 2,100 mm Machine weight: 4,000 kg External reference: 60

Condition: excellent (used), Year of construction: 1988, machine/vehicle number: 119, functionality: fully functional, power: 11 kW (14.96 HP), input voltage: 380 V, input frequency: 50 Hz, pressing force: 30 t, stroke length: 700 mm, table width: 500 mm, table length: 700 mm, clearance between the columns: 680 mm, total length: 2,100 mm, total width: 1,800 mm, total height: 3,500 mm, overall weight: 3,000 kg, Equipment: safety light barrier, Well-maintained 4-column hydraulic press from a facility closure. The machine is fully functional and was in production use until recently. Rodpfsy Sglwox Ai Hou It has been modernized and features an overhauled digital Siemens control system. Additionally, it is equipped with a safety enclosure and SICK brand light curtains. The machine is currently in storage but is available for inspection upon request.

Condition: good (used), Year of construction: 1966, machine/vehicle number: 11473, functionality: fully functional, power: 4 kW (5.44 HP), input voltage: 400 V, pressing force: 40 t, stroke length: 150 mm, table width: 270 mm, table length: 3,000 mm, table height: 880 mm, distance table to ram: 1,500 mm, oil tank capacity: 150 l, total length: 1,300 mm, total width: 3,250 mm, total height: 2,160 mm, overall weight: 1,500 kg, year of last overhaul: 2025, Equipment: documentation/manual, We are offering this quality Eitel straightening press / hydraulic press / shaft straightening press. -> Year of manufacture: 1966 -> Straightening force: 40 t, 4.0 kW -> Stroke: 150 mm, max. 1500 mm between centers -> Table: 270 x 3000 mm -> Carriage with centers and dial gauges, movable; centers are spring-loaded -> Straightening stroke adjustable on the shaft via handwheel; hand lever with cam control Redpfjyzg Ttex Ai Hju -> Straightening stroke range approx. 20 mm by turning the hand lever with cam -> Precision straightening in hundredths of a millimeter possible -> Weight: approx. 1.5 t -> Height: approx. 2.10 m -> Original operating manual included -> Video available upon request The machine is in good condition and fully functional! If you have any questions or would like more information, feel free to send us a message or give us a call.

Year of construction: 1970, condition: used, machine/vehicle number: 12469, Hydraulic press, single-column quick-cycle press, C-column press, oil-hydraulic press - Press force ram: 40 to -Clamping table: 800 x 560 mm -Insertion height: 750 mm - Projection: 300 mm -Max. Stroke: 350mm -Operation: two-handed Rodjb A Tcfopfx Ai Hsu -Dimensions: 1700/1350/H3200 mm -Weight: about 5000 kg

Condition: used, Hydraulic press, oil hydraulic press, pressing machine, pressing tool, pressing pliers Redpfx Aieix Rche Hsu -Hydraulic press: Hydraulic unit novopress type WK 9483 -Pressure: max. 150 bar / 0.45 l/min -with punch set: 1x Ø 18mm, 2x Ø 14mm, 1x Ø11 mm, 1x Ø 9mm -Operation: foot pedal -Connection hoses: for pressing tongs or similar -Dimensions: 850/550/H1250mm -Weight: 158 kg

Condition: good (used), Hydraulic press, single-column press, C-column press, oil-hydraulic press, hydraulic single-column press -Handover: in its current condition as inspected -Note: without hydraulic unit and control system -Pressing force: 40 tons Redjupbdgopfx Ai Heu -Piston rod: Ø 105 mm -Max. stroke: 710 mm -Mounting plate: 550 x 800 x 45 mm -Mounting plate holes: Ø 18 mm -Dimensions: 890/1570/H610 mm -Weight: 826 kg

Year of construction: 2001, condition: good (used), Offer 20202 Technical data: - max. pressing force 35 t - projection to the center of the ram 240 mm Rjdpfx Aiop Dt Tao Heu - working height adjustable with hand crank 540 to 940 mm - 2 hand controls - protective screen enclosure with light barrier - material - insertion device - pneumatic connection - Press control via SIEMENS SIMATEC OP 7 - drive 400 V / 15,5 kW - Space requirement approx. W 1200 x H 2000 x D 2400 mm - Weight approx. 2500 kg

Condition: used, Year of construction: 2003, pressure . t throat . mm stroke . mm pressure capacity max. 63 t total power requirement . kW Redjw Syfcjpfx Ai Hsu weight of the machine ca. 4 t

Condition: used, Year of construction: 1960, pressure 1000 t Rjdpfxjw Syd Ej Ai Heu stroke 600 mm weight of the machine ca. 4 t

Condition: used, Year of construction: 2015, pressure 30 t throat 250 mm table-size 650 x 500 mm stroke 400 mm dayligth min. 120 / max. 500 mm Control Simatic HMI Touch Siemens total power requirement 13 kW weight of the machine ca. 3,5 t dimensions of the machine ca. 2,5 x 1,70 x 2,85 m Setup mode and single stroke operating mode Rsdjw D Hiajpfx Ai Heu Two side tables with a support surface of 850x500mm with hydraulic ball bars for heavy workpieces

Condition: new, neu ca. 4 Monate ab Auftragse Italien 72500 € 1370.25 € 35 to 500 mm 700x350 mm 700x500 mm 600 mm 250 mm 125 mm/s 43 mm/s 9 mm/s 68 mm/s 4 kW 1100 mm 1400 mm 2300 mm Rsdpoynndlsfx Ai Heu 4 guides for the slide T-slots in the table Rexroth hydraulic unit Monitored electrovalves Air/oil heat exchanger Pressure switch Double pushbuttons control Stroke adjustment by limit switch microns Siemens CPU Lateral fixed protrection grates CE certification following "IV enclosure" OPTIONS(prices on request): Blank holder Prismatic guides Frontal light curtain CNC control Siemens with touchscreen Hydraulic pump with variable flow Proportional valves Lateral sliding guides with security microns

Condition: new, neu ca. 4 Monate ab Auftragse Italien 35400 € 676.14 € 40 to 500 mm 700x350 mm 700x500 mm 500 mm 250 mm 26 mm/s 9 mm/s 4 kW 1500 mm 1000 mm 2500 mm 1500 kg 2-fold round guidance table and ram with T-slots 2 hand operation Siemens PLC manometer users manual 4-fold round guidings € 1.900,- Light barrier € 7.300,- Siemens control for programming of stroke and press time € 4.000,- Siemens touchscreen-control, 50 programsstoreable, for programming: • Upstroke and downstroke quota • Break time in the bottom • time of Decompression • setting pressure of work • Pieces counter • prestop in upstroke and downstroke • setting for movement in manual and in automatic Rsdpfx Aioynm Hrj Hou • management of alarms and anomalies € 9.000,- Stroke counter € 400,- Decompression valve € 700,- Oil cooler with decompreission valve € 3.700,- Pressure switch € 900,-

Condition: excellent (used), Year of construction: 1986, functionality: fully functional, pressing force: 40 t, stroke length: 500 mm, operating speed: 100 mm/s, reverse speed: 450 mm/s, table width: 630 mm, table length: 500 mm, ram plate width: 450 mm, ram plate length: 380 mm, oil tank capacity: 300 l, total length: 1,150 mm, total width: 1,750 mm, total height: 3,050 mm, overall weight: 3,200 kg, distance between stands: 800 mm, Equipment: documentation/manual, Hydraulic press PYE 40 S1/M with ejector. Year of manufacture 1986. Manufacturer VEB Wema Zeulenroda (Germany). Machine after general overhaul. Piston seal replaced. Parameters: Maximum pressing force 40 tons. Working pressure 16 MPa. Upper table 380 x 450 mm. Lower table 500 x 630 mm. Clearance 800 mm. Cylinder stroke 500 mm. Down speed 100 mm/sec. Up speed 450 mm/sec. Ejector stroke 200 mm. Ejector force 16 tons. Power demand 13 kW. Weight 3180 kg. Height 3050mm, Length 1750mm, Width 1150mm. The technical condition of the machine is very good. The machine has been overhauled. Rodswbt Uqspfx Ai Hou It is possible to inspect and check the machine in motion.

Year of construction: 1992, condition: used, pressure 30 t Rjdephvl Nepfx Ai Hou throat max. 250 mm stroke max. 200 mm power stroke 20 mm dayligth 475 mm table surface area 550 x 500 mm weight of the machine ca. 2050 kg

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, operating hours: 906 h, pressing force: 30 t, stroke length: 400 mm, throat depth: 250 mm, controller manufacturer: Siemens, installation height: 500 mm, Press with only approximately 1000 operating hours! TECHNICAL DETAILS Press data Pressure: 30 t Throat depth: 250 mm Stroke: 400 mm Installation height min.: 100 mm Installation height max.: 500 mm Control: Siemens SIMATIC HMI MACHINE DETAILS Total rated power: 13 kW Redpfx Asw Dax Uei Hju Dimensions & Weight Machine weight: approx. 3 t Required space: approx. 2.5 m x 1.70 m x 2.85 m Operating hours Total hours: 2637 h Working hours: 1000 h

Condition: new, pressure: 40stroke: 500table area: 700x500daylight: 600rapid traverse: 26working speed: 9motor: 4Features:Two-stage hydraulic pump – integrated into the machine frame Lever and push-button control – with simultaneous two-hand operation for safety Cylinder stroke: 500 mm – suitable for a wide range of applications Milled lower worktable – solid and precision-machined Two working speeds – for fast yet accurate operation Adjustable maximum pressure – adaptable to different tasks Integrated pressure gauge – for precise pressure monitoring during operation Rsdpfowwx Arsx Ai Hsu

Condition: new, pressure: 150stroke: 500table area: 800x600daylight: 630rapid traverse: 22working speed: 3motor: 4messurements (LxWxH): 1800 x 1200 x 2400weight approx.: 4500Features:Two-stage hydraulic pump – integrated into the machine frame Lever and push-button control – with simultaneous two-hand operation for safety Cylinder stroke: 500 mm – suitable for a wide range of applications Milled lower worktable – solid and precision-machined Two working speeds – for fast yet accurate operation Adjustable maximum pressure – adaptable to different tasks Rsdswwx Afspfx Ai Hou Integrated pressure gauge – for precise pressure monitoring during operation

Condition: new, pressure: 200stroke: 500table area: 1000 x 600daylight: 640rapid traverse: 21working speed: 2motor: 5.5messurements (LxWxH): 1800 x 1300 x 2500weight approx.: 6400Features:Two-stage hydraulic pump – integrated into the machine frame Lever and push-button control – with simultaneous two-hand operation for safety Cylinder stroke: 500 mm – suitable for a wide range of applications Milled lower worktable – solid and precision-machined Two working speeds – for fast yet accurate operation Rsdpewwx Alefx Ai Hsu Adjustable maximum pressure – adaptable to different tasks Integrated pressure gauge – for precise pressure monitoring during operation

Condition: new, pressure: 70stroke: 500table area: 700x500daylight: 600rapid traverse: 25working speed: 5motor: 4messurements (LxWxH): 1400 x 900 x 2250weight approx.: 1900Features:Two-stage hydraulic pump – integrated into the machine frame Lever and push-button control – with simultaneous two-hand operation for safety Cylinder stroke: 500 mm – suitable for a wide range of applications Milled lower worktable – solid and precision-machined Redpfx Aijwwx Axs Hju Two working speeds – for fast yet accurate operation Adjustable maximum pressure – adaptable to different tasks Integrated pressure gauge – for precise pressure monitoring during operation